Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
Steel enclosures
AE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178
CM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180
KL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 176
SE8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182
TS8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 184
Stainless steel enclosures
AE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 188
CP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .189
KL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 187
SE8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192
TS8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190
Hygienic design enclosures . . . . . . . . . . . . . . . . . . . . . 194
Arm system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196
Enclosure heaters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 197
Fan and filter units . . . . . . . . . . . . . . . . . . . . . . . . . . . . 198
Cooling units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200
Air/water heat exchangers . . . . . . . . . . . . . . . . . . . . . . 204
LED lighting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205
Enclosures & LED lighting
www.lcautomation.com
Enclosures explained . . . www.lcautomation.com
Call Blackburn – 01254 685900 or Chippenham – 01249 460099172
See pages 178-179 The AE range is also available in stainless steel – see page 188
The KL range is also available in stainless steel – see page 187
See pages 180-181
Compact enclosures with mounting strips on the door for fast attachment ofsupport strips, cable conduit holders and covers. The door has an openingangle of 130° (180° by request) and the rear panel is supplied with holesprepared for wall mounting bracket or direct wall mounting, The single doorsare hinged on the right, but it is possible to swap these to the left on all exceptthe 200mm wide enclosures. The multi-folded enclosure protection channelprevents dirt and water entering when the door is opened, there is also a PEconductor connection facility on the enclosure, door and mounting plate. Thecable gland plates, which are made from steel for self-assembly, may beexchanged for pre-punched plates or plastic cable gland plates.
The AE range . . .
Available widths:
200, 300, 380,400, 500, 600,760, 800, 1000mm
A E X X X X 5 0 0.
Available widths:
600, 800, 1000,1200mm
Terminal boxes with screw-fastened lid and profile strips with mounting holeson both sides for the installation of cross rails or mounting plate. Cover may beopened and securely locked in a flash, with a quick-action screw. Quarter turninstead of thread ensures correct contact pressure of the seal. Available with orwithout cable gland plates (enclosures with gland plates include steel gland plateswith seals and assembly parts).
The KL range . . .
Compact system enclosures which combine the case benefits of the AEcompact enclosure with the installation diversity of the TS8 top enclosuresystem. They are an excellent alternative to the larger enclosures in the AEseries. The single doors are hinged on the right, but it is possible to swap theseto the left. The enclosures are supplied with a mounting plate and open basefor individual cable entry.
The CM range . . .
Available widths:
150, 200, 300, 400, 500, 600,800mm
Example code:
C M X X X X 5 0 0.Example code:
See pages 176-177K L X X X X 5 1 0.Example code:
•180º hinges•Base/plinths•Baying kits•Cable glands
•Door stays•Eye bolts•Interior rails•LED system lights
•Locks with key•Rain canopy•Wall mounting brackets•Wiring plan pockets
Available accessories:
•Base configuration rail•Base/plinths•Cable clamp rails•Interior rails
•Locking systems•Mounting plate slide block•Punched sections withmounting flanges
•Rain canopy/vented roof•Support strips for door•Wiring plan pockets
Available accessories:
•Cable retainers•Cover hinges•Cover retainers
•Earthing set•Mounting plate•Support rails (DIN rail)
•Spare quick releasefasteners•Wall mounting brackets
Available accessories:
RAL 7035
Steel
Colour
Enclosure
RAL 7035
Steel
Colour
Enclosure
RAL 7035
Steel
Colour
Enclosure
Enclosures explained . . . www.lcautomation.com
173Check latest prices and stock availability @ www.lcautomation.com
The TS8 range is also available in stainless steel – see pages 190-191
The SE8 range is also available in stainless steel – see pages 192-193
See pages 184-186T S X X X X 5 0 0.Example code:
See pages 182-183S E X X X X 5 0 0.Example code:
•180º hinges•Adaptor sections•Base/plinths•Baying brackets•Blanking covers•Cable clamp rails•Cable entry sections•Door stays•Earth straps
•Earthquake kits•Flex-Block•Holder for protective bar•LED system lights•Levelling component•Locking systems•Mounting brackets•Partial doors•Partial mounting plates
•Protective bars•Roof plates•Side panels•Support strips for door•System lights•Trim panels•Wiring plan pockets
Available accessories:
These enclosures consist of two side panels and a roof that are made from onepiece of steel, the rear panel of the enclosure is screwed on for easy access andcable entry can be handled in a variety of ways using the integrated base frame.The door and rear wall are electrically bonded to the enclosure using apatented hardware system that requires no separate ground straps. The twomounting levels integrated into the enclosure provide more room for options,making better use of space while reducing installation time. The enclosures areavailable as one and two door versions, the single doors are hinged on theright, but it is possible to swap these to the left. The enclosed basic frame helpsto reduce debris and dirt collection making cleaning easier. The enclosures arehighly stable thanks to the self-supporting, integrated frame construction. Allstandard TS8 accessories are compatible.
Available widths:
600, 800, 1000, 1200,1600, 1800mm
•Base/plinths•Cable entry plate•Cable clamp rails
•Flex-Block•Locking systems•Roof eyebolts
•Punched sections withmounting flanges
Available accessories:
The TS8 floor standing enclosure is a baying system with a variety of mountingpossibilities. The strength and flexibility of these enclosures come from theirrobust 16 fold, tubular frame which features a 25mm hole pattern that allowscomponents and accessories to be mounted horizontally or vertically. They can support loads of up to 3,200lb. Combined with the included zinc-platedmounting panel, the TS8 provides 15% more interior mounting space thansimilar enclosures. Due to its modular design it is easily adaptable to yourunique requirements, each vertical section is able to accommodate the hinges for an enclosure panel, ensuring the units are bayable on all sides. The rear panel can easily be exchanged for a door and both side panels may be hinged. The TS8 can protect critical equipment in even the most demanding environments.
The TS8 range . . .
Available widths:
400, 600, 800,1000, 1200mm
RAL 7035
Steel
Colour
Enclosure
The SE8 range . . .
RAL 7035
Steel
Colour
Enclosure
Accessories explained . . . www.lcautomation.com
Call Blackburn – 01254 685900 or Chippenham – 01249 460099174
Trim panels at the front and rear with fittedcorner pieces and side trim panels.
Base/plinth
All screws, nuts, contact washers andearthing strips needed to earth the cover.
Plinth which acts as a pallet once installed,eliminating the need for a wooden pallet,making it easy to move the enclosurearound. Tool-less assembly once thecorner blocks have been fitted.
With pre-punched holes (metric or PG) forcable glands. Used for sealing standardcable gland plates.Temperature range: -40 to +70ºC
The cable gland and locknut are supplied ina single pack, they have clampingmembranes for even tightening and strainrelief which protects the cables. Insulationis via a plastic insert with optimum seal onthe connection thread thanks to theO-ring. The locknut cuts automatically intothe spray finish, creating a conductiveconnection.
For mounting in the enclosure. Suitablefor mounting on the sides, base and roofareas.
For attaching to the enclosure from theoutside. Supplied with assembly parts.
There are a large selection of locking systems available, e.g.• Cam locks• Ergoform S lock systems• Semi cylinder locks• Security locks
For connecting individual enclosures into bayed suites. The enclosures areconnected between the base and roof frame.
Used to secure enclosure doors in theopen position. Also available with 180ºhinges for emergency escape routes
For fan and filter units/outlet filters. Easycleaning thanks to exterior silicon coatingapproved for use with foodstuffs.
Easily fitted without drilling and allows thecovers to be opened upwards, even whenthe terminal box below is bayed.
The cover hinge is simply screwed to theenclosure protection channel and to theedge fold.
For strain relief with cable entry. Thelength of the cable clamp rail is tailored tothe width of the mounting plate. Thesupplied mounting bracket can beinstalled straight or tilted.
RAL 7022
Steel
Colour
Material
RAL 7035Colour
SteelMaterial
BrassSteel
Stainless steel
Material
Baying kit
Brackets for wall mounting
Cable clamp rails
Cable glands
BrassPolymide 6
Material
For individual rail mounting. Flat or inclinedversions available.
SteelMaterial
Cable retainers Flex-Block
Cable glandplates
Hose proof hoods
Cover hinge forKL enclosures
Cover retainerfor KL enclosures
Door stays
Earthing set
Die-cast ZincMaterial
SteelMaterial
Stainless steelMaterial
Interior rails
Keys/lockingsystems
SteelMaterial
Accessories explained . . .www.lcautomation.com
175Check latest prices and stock availability @ www.lcautomation.com
To compensate for height differences withfloor irregularities.
For component installation outside of the enclosure.
RAL 7035
Steel
Colour
Material
RAL 7035
Steel
Colour
Material
Steel/Stainless steel
Material
Levelling feet Punched section with orwithout mounting flange
Support rails
Mounting plate(Back plate)
Quick release fastenerfor KL enclosures
Mounting plate infill
Rain canopy
SteelMaterial
SteelMaterial
Pole clamp
Pressure reliefstoppers
SteelMaterial
PolypropyleneMaterial
Useful for a continuous mounting surface inbayed suites where the mounting plate isset forward.
For reliable, convenient fastening to roundor square poles.
Helps prevent condensation in sealedenclosures and can also be installed invertical surfaces to protect against dirt.
Roof eyebolts
Wiring plan pockets
For designing flexible interior installation,and/or to accommodate additional built-incomponents. Variable, with five rows ofholes for universal skeleton structures orpartial assembly. Available with or withoutmounting flange.
Ideal for use in inaccessible areas, it isscrew fastened to the mounting bracket atthe front.
Reliable protection for outdoor siting, withwater run-off to the rear. Easily retro-fitted.
For crane transportation of enclosures,available with or without reinforcementplate.
Available in either standard 2m lengths oras sized lengths to fit the enclosure width.Available widths : 137, 187, 287, 387, 455, 487,
555, 587, 755 or 1155mm
Used for attaching cable ducts, cableconduit holders, contact hazard andprotection covers. They are also useful forequipment installed on the door, cableclamping and attachment.
Useful for holding wiring plans during faultfinding and maintenance work. The lecterncan be bayed according to the door widthand is suitable for mounting on the tubulardoor frame.
For fastening to door frames.
Available for direct attachment in all largeenclosures and for mounting on compactenclosures.
PlasticSteel
Material
Wiring plan lectern
LED system lights
Support strips
Enclosures & LED Lighting www.lcautomation.com
Call Blackburn – 01254 685900 or Chippenham – 01249 460099176
KL – Terminal boxes
Technical specificationMaterialEnclosure . . . . . . . . . . . . . . . . . . . . Steel Cover . . . . . . . . . . . . . . . Steel, all-round
foamed-in PU sealSurface finishEnclosure and cover . . . Dipcoat-primed
powder-coated on the outsidetextured paint
Colour . . . . . . . . . . . . . . . . . . . RAL 7035Protection categoryWithout gland plate . . IP66 to IEC60529
complies with NEMA 4With gland plate . . . . . IP55 to IEC60529
complies with NEMA 12
Approvals=UL= cUL= CSA= TÜV= Germanischer Lloyd= Russian Maritime Register of Shipping= Lloyds Register of Shipping= Bureau Veritas
Terminal boxes
Includes:= KL terminal box with cover=Quick action screw including plastic bushes
=Where cable gland plateis included they are steelwith seals and assemblyparts included
150 150 80 1.25 1.25 1.4 — KL1514.510 £20.58
150 150 120 1.25 1.25 1.6 — KL1500.510 £22.94
200 150 80 1.25 1.25 1.6 — KL1528.510 £23.40
200 150 120 1.25 1.25 1.8 — KL1529.510 £25.22
200 200 80 1.25 1.25 1.9 — KL1516.510 £24.12
200 200 120 1.25 1.25 2.3 — KL1502.510 £26.00
300 150 80 1.25 1.25 2.1 — KL1515.510 £24.48
300 150 120 1.25 1.25 2.6 — KL1501.510 £26.74
300 150 120 1.25 1.25 2.7 4 KL1530.510 £34.12
300 200 80 1.25 1.25 2.6 — KL1517.510 £26.00
300 200 120 1.25 1.25 3.0 — KL1503.510 £28.89
300 200 120 1.25 1.25 3.3 4 KL1531.510 £36.69
300 300 120 1.38 1.25 4.0 — KL1507.510 £35.09
300 300 120 1.38 1.25 4.5 4 KL1535.510 £44.16
400 150 120 1.25 1.25 3.2 — KL1589.510 £30.82
400 200 80 1.25 1.25 3.2 — KL1518.510 £30.28
400 200 120 1.25 1.25 3.6 — KL1504.510 £32.62
400 200 120 1.25 1.25 4.0 4 KL1532.510 £40.43
400 300 120 1.38 1.25 4.8 — KL1508.510 £38.40
400 300 120 1.38 1.25 5.2 4 KL1536.510 £47.76
400 400 120 1.38 1.25 6.2 — KL1511.510 £46.42
400 400 120 1.38 1.25 6.7 4 KL1539.510 £56.85
500 200 120 1.25 1.25 4.4 — KL1505.510 £36.39
500 200 120 1.25 1.25 4.9 4 KL1533.510 £47.11
500 300 120 1.38 1.25 5.2 4 KL1537.510 £54.22
500 300 120 1.38 1.25 5.8 — KL1509.510 £43.11
600 200 80 1.25 1.25 4.6 — KL1519.510 £38.62
600 200 120 1.25 1.25 5.7 — KL1506.510 £39.69
600 200 120 1.25 1.25 5.9 4 KL1534.510 £50.18
600 300 120 1.38 1.25 6.8 — KL1510.510 £48.12
600 300 120 1.38 1.25 7.7 4 KL1538.510 £59.15
600 400 120 1.38 1.25 8.4 — KL1512.510 £54.54
600 400 120 1.38 1.25 9.0 4 KL1540.510 £64.75
800 200 120 1.25 1.25 6.8 — KL1527.510 £57.99
800 200 120 1.25 1.25 7.2 4 KL1542.510 £65.21
800 400 120 1.38 1.25 11.0 — KL1513.510 £64.60
800 400 120 1.38 1.25 12.0 4 KL1541.510 £76.95
Dimensions (mm) Material thickness (mm) Weight Cable ListW H D Enclosure Door (kg) Gland Plate Order Code Price
PG style A: 12 x PG13.5 2 5 KL1581.000 £38.30
PG style B: 6 x PG13.5, 2 x PG16 and 2 x PG21 2 5 KL1582.000 £38.30
Pack ListDescription Size Qty Order Code Price
Plastic cable gland plates with PG knockouts
Plastic cable gland plates with PG knockouts
Style A:12 x PG13.5
PG13.5
PG13.5
PG13.5
PG13.5
PG13.5
PG13.5
PG13.5
PG13.5
PG13.5
PG13.5
PG13.5
PG13.5
Style B:6 x PG13.5, 2 x PG16 and 2 x PG21
PG13.5 PG
13.5
PG13.5
PG21
PG16PG16
PG16
PG21
PG13.5
PG13.5
PG13.5
Enclosures & LED Lightingwww.lcautomation.com
KL – Terminal box accessories
Cable retainer (flat) 20 SZ2365.000 £36.69
Cable retainer (inclined) 20 SZ2366.000 £37.90
Cover retainer 3 pairs KL1591.000 £14.00
Cover hinges (die-cast zinc) 6 KL1592.000 £16.60
Cover hinges (stainless steel) 2 KL1592.010 £36.31
Earthing set 5 SZ2570.100 £24.80
Spare quick-release fastener 12 KL1593.000 £16.97
Wall mounting brackets (8mm wall distance) 4 KL1590.000 £5.01
Wall mounting brackets (10mm wall distance) 4 SZ2508.010 £12.81
Wall mounting brackets (40mm wall distance) 4 SZ2503.010 £12.81
Pack ListDescription Qty Order Code Price
Accessories
150 137 TS 35/7.5 10 SZ2314.000 £24.76
200 187 TS 35/7.5 10 SZ2315.000 £27.69
300 287 TS 35/7.5 10 SZ2316.000 £36.22
400 387 TS 35/7.5 10 SZ2317.000 £35.94
500 487 TS 35/15 10 SZ2318.000 £48.30
600 587 TS 35/15 10 SZ2319.000 £55.33
Enclosure Support Rails Pack ListW (mm) L (mm) Design Qty Order Code Price
2 TS 35/7.5 6 SZ2313.750 £46.81
2 TS 35/15 6 SZ2313.150 £70.95
Support Rails Pack ListL (m) Design Qty Order Code Price
Support rails (DIN rail)
150 150 KL1560.700 £4.11
200 150 KL1575.700 £4.90
200 200 KL1562.700 £5.50
300 150 KL1561.700 £5.50
300 200 KL1563.700 £6.79
300 300 KL1567.700 £9.30
400 150 KL1576.700 £7.11
400 200 KL1564.700 £8.51
400 300 KL1568.700 £11.64
400 400 KL1571.700 £16.38
EnclosureW H List
(mm) (mm) Order Code Price
Mounting plates
500 200 KL1565.700 £10.53
500 300 KL1569.700 £14.78
600 200 KL1566.700 £12.60
600 300 KL1570.700 £18.13
600 400 KL1572.700 £21.45
800 200 KL1574.700 £20.16
800 400 KL1573.700 £26.33
EnclosureW H List
(mm) (mm) Order Code Price
Length sized to enclosure width
Standard 2m length
Plastic cable gland plates with PG knockouts
Mounting plates
Cable retainer
Earthing set
Support rails
Mounting plateFor component installation outside of theenclosure. Assembly screws included as
accessories with the enclosure.
Support rails (DIN rail)TS 35/7.5 or TS 35/15Supplied in two lengths –
Standard 2m orsized to the enclosure width
You may need to order . . .
General accessoriesCable and cover retainers,hinges, earthing set,
spare quick-release fastenersand wall mounting brackets
1
2
3
1
3
2
The KL range is also available in stainless steel – see page 187
177Check latest prices and stock availability @ www.lcautomation.com
Enclosures & LED Lighting www.lcautomation.com
Call Blackburn – 01254 685900 or Chippenham – 01249 460099178
AE – Compact enclosures
Technical specificationMaterialEnclosure . . . . . . . . . . . . . . . . . . . . SteelDoor . . . . . . . . . . . . . . . . Steel, all-round
foamed-in PU sealSurface finishEnclosure and door . . . . Dipcoat-primed
powder- coated on the outsidetextured paint
Mounting plate . . . . . . . . . . . Zinc-platedColour . . . . . . . . . . . . . . . . . . . RAL 7035Protection category300-800mm . . . . . . IP66 to IEC 60529,
complies with NEMA 4X200 & 1000mm . . . . IP55 to IEC 60529,
complies with NEMA 12
Approvals=UL= cUL= CSA= TÜV= Germanischer Lloyd= Russian Maritime Register of Shipping= Lloyds Register of Shipping= Bureau Veritas
Includes:= AE compact enclosure= Gland plate(s) in enclosure base= Cam lock or 3-point lock=Mounting plate= Single door enclosures include aninterchangeable door hinge(except AE1032.500 and AE1035.500)
200 300 120 1 — 1 4.0 162 275 AE1032.500 £37.26200 300 155 1 — 1 4.5 162 275 AE1035.500 £43.32300 300 155 1 — 1 6.1 254 275 AE1036.500 £48.56300 300 210 1 — 1 7.0 254 275 AE1033.500 £54.73300 400 210 1 — 1 8.8 254 375 AE1034.500 £59.65380 300 155 1 — 1 7.4 334 275 AE1030.500 £50.11380 300 210 1 — 1 7.5 334 275 AE1031.500 £56.71380 380 210 1 — 1 9.8 334 355 AE1380.500 £60.83380 600 210 2 — 1 15.6 334 570 AE1038.500 £71.95380 600 350 2 — 1 19.4 334 570 AE1338.500 £119.91400 500 210 2 — 1 13.0 354 475 AE1045.500 £70.51400 800 300 2 — 1 26.2 349 770 AE1037.500 £140.67500 500 210 2 — 1 16.8 449 470 AE1050.500 £86.29500 500 300 2 — 1 19.6 449 470 AE1350.500 £111.33500 700 250 2 — 1 31.2 449 670 AE1057.500 £123.19600 380 210 1 — 1 15.4 549 355 AE1039.500 £80.52600 380 350 1 — 1 20.0 549 355 AE1339.500 £132.38600 600 210 2 — 1 22.8 549 570 AE1060.500 £96.70600 600 250 2 — 1 24.8 549 570 AE1054.500 £122.17600 600 350 2 — 1 28.4 549 570 AE1360.500 £144.18600 760 210 2 — 1 32.1 549 730 AE1076.500 £117.45600 760 350 2 — 1 36.0 549 730 AE1376.500 £170.49600 800 250 2 — 1 33.6 549 770 AE1058.500 £148.41600 1000 250 2 — 1 50.5 539 955 AE1090.500 £167.22600 1200 300 — 4 1 55.0 540 1155 AE1260.500 £202.67760 760 210 2 — 1 40.0 704 730 AE1077.500 £154.07760 760 300 2 — 1 44.5 704 730 AE1073.500 £180.66800 600 300 2 — 1 33.9 749 570 AE1055.500 £170.28800 1000 300 2 — 1 57.0 739 955 AE1180.500 £199.13800 1200 300 — 4 1 70.0 740 1155 AE1280.500 £232.33
1000 760 210 2 — 2 52.0 730 944 AE1100.500 £228.061000 760 300 2 — 2 56.0 730 944 AE1130.500 £236.691000 1000 300 2 — 2 71.0 939 955 AE1110.500 £260.461000 1200 300 — 4 2 85.0 940 1155 AE1213.500 £307.991000 1400 300 — 4 2 97.0 940 1355 AE1114.500 £391.35
No. of 3-point MountingDimensions (mm) Cam Lock No. of Weight Plate (mm) ListW H D Locks System Doors (kg) W H Order Code Price
Enclosures
The AE range is also available in stainless steel – see page 188
Includesmounting
plate
LED System Lights
www.lcautomation.com
See page205
Enclosures & LED Lightingwww.lcautomation.com
179Check latest prices and stock availability @ www.lcautomation.com
600 300 279 SO2816.200 £50.43
800 300 279 SO2818.200 £52.98
1000 300 279 SO2801.200 £49.30
Enclosure PlinthW D D Order List(mm) (mm) (mm) Code Price
600 300 279 SO2826.200 £64.35
800 300 279 SO2828.200 £71.37
1000 300 279 SO2802.200 £88.51
Enclosure PlinthW D D Order List(mm) (mm) (mm) Code Price
Base/plinth, complete (RAL 7022)
AE – Compact enclosure accessories
Plastic handle (inc. 2 keys - 3524E) SZ2576.000 £17.94
T-handle die-cast zinc, chrome-plated (inc. 2 keys - 3524E) SZ2575.000 £28.20
ListDescription Order Code Price
Handles (Version B)
380 210 SZ2501.500 £53.42
600 210 SZ2502.500 £67.58
600 350 SZ2511.500 £72.48
EnclosureW D List
(mm) (mm) Order Code Price
Rain canopy
100mm high 200mm high
210 4 SZ2383.210 £21.71
250 4 SZ2383.250 £27.14
300 4 SZ2383.300 £26.94
350 4 SZ2383.350 £37.53
Enclosure Pack ListD (mm) Qty Order Code Price
Rails for interior installation
M6 10 200 10 SZ2412.210 £35.55
M8 16 200 10 SZ2412.216 £40.01
M8 25 200 10 SZ2412.225 £41.39
M6 10 300 10 SZ2412.310 £50.99
M8 16 300 10 SZ2412.316 £66.73
M8 25 300 10 SZ2412.325 £77.03
Cross section Length Pack ListConnection mm2 (mm) Qty Order Code Price
Earthing straps
M12 x 1.5 3-7 15 Brass SZ2411.801 £16.08
M16 x 1.5 4.5-10 15 Brass SZ2411.811 £18.65
M20 x 1.5 7-13 10 Brass SZ2411.821 £16.08
M25 x 1.5 10-17 10 Brass SZ2411.831 £19.66
M32 x 1.5 13-21 5 Brass SZ2411.841 £15.50
M40 x 1.5 19-28 4 Brass SZ2411.851 £18.22
M50 x 1.5 25-35 2 Brass SZ2411.861 £19.09
M63 x 1.5 35-48 1 Brass SZ2411.871 £21.81
Cable Pack ListSize Diameter (mm) Qty Material Order Code Price
Cable glands
Baying kit 1 set SZ1199.100 £28.18
Door stay 5 SZ2519.000 £34.32
180º hinges 2 SZ2449.000 £19.04
Eyebolts 4 SZ2509.000 £23.77
Wall mounting bracket for external mounting 4 SZ2508.100 £11.79
Pack ListDescription Qty Order Code Price
Accessories
Base/plinth Interior rails
Handles (version B)Cable glands
Base/plinth (complete)100mm or 200mm high
Trim panels at the front and rear withfitted corner pieces and side trim panels
(Includes assembly parts)
Rails for interiorinstallation
For mounting in the enclosure(no machining required). Suitable forall-round mounting on the sides, baseand roof areas. Variable with 2 rows of
system punchings.
You may need to order . . .
Rain canopyReliable protection for outdoor sitingwith water run-off to the rear.
Easily retro-fitted(Includes assembly parts)
1
3
HandlesAvailable in plastic (RAL 9011) or
T-handle in die-cast zinc, chrome plated.(Includes two keys, assembly parts & seals)
4
Earthing strapsEarthing straps counteract the currentdisplacement effect at high frequencies,whilst at the same time offering highlyflexible connection opportunities.
Tin-plated copper, available in variouslengths and cross sections with press fitted contact rings.
5
Cable glandsSupplied in brass with nickel platedsurface finish and neoprene seal.
The clamping membrane is designed foreven tightening and strain relief whichprotects the cables. Insulation is via aplastic insert with optimum seal on theconnection thread, due to the O-ring.
6
AccessoriesBaying kit, door stay,180º hinges, eyebolts,wall mounting brackets forexternal mounting
7
2
1
32
4
5
6
7
3
Enclosures & LED Lighting www.lcautomation.com
Call Blackburn – 01254 685900 or Chippenham – 01249 460099180
600 800 400 1 540 755 CM5110.500 £191.53600 1000 400 1 540 955 CM5111.500 £232.03600 1200 300 1 540 1155 CM5112.500 £218.67600 1200 400 1 540 1155 CM5113.500 £260.07800 1000 300 1 740 955 CM5114.500 £216.29800 1000 400 1 740 955 CM5115.500 £275.22800 1200 300 1 740 1155 CM5116.500 £250.99800 1200 400 1 740 1155 CM5117.500 £323.01
1000 1000 300 2 940 955 CM5118.500 £283.231000 1200 300 2 940 1155 CM5119.500 £329.981000 1200 400 2 940 1155 CM5120.500 £384.571000 1400 300 2 940 1355 CM5121.500 £397.161000 1400 400 2 940 1355 CM5122.500 £488.341200 1200 400 2 1140 1155 CM5123.500 £427.66
Dimensions (mm) No. of Mounting Plate (mm) ListW H D Doors W H Order Code Price
CM – Compact system enclosures
Enclosures
Cable gland plates
300 600 1-piece 1 1 CM5001.218 £9.53300 800 1-piece 1 1 CM5001.219 £11.73300 1000 2-piece 1 2 CM5001.220 £9.09300 1200 2-piece 1 2 CM5001.221 £10.14400 600 1-piece 1 1 CM5001.222 £9.32400 800 1-piece 1 1 CM5001.223 £12.05400 1000 2-piece 1 2 CM5001.224 £11.32400 1200 2-piece 1 2 CM5001.225 £10.48
Enclosure Base Pack Packs ListD (mm) W (mm) Opening Qty Required Order Code Price
100mm high
600 1 set TS8601.600 £28.80800 1 set TS8601.800 £29.74
1000 1 set TS8601.000 £38.651200 1 set TS8601.200 £39.48
Enclosure Pack ListW (mm) Qty Order Code Price
300 1 set TS8601.030 £14.32400 1 set TS8601.040 £16.21
Enclosure Pack ListD (mm) Qty Order Code Price
100mm highBase/plinth components, front and rear (RAL 7022)
Base/plinth side trim panels (RAL 7022)
1 Set = 2 base/plinth side trim panels including parts for attaching to the base/plinth components
1 Set = 2 base/plinth components, 4 cover caps, 4 screws and captive nuts M12 for mounting on the enclosure
200mm high
600 1 set TS8602.600 £46.50800 1 set TS8602.800 £57.17
1000 1 set TS8602.000 £73.601200 1 set TS8602.200 £79.84
Enclosure Pack ListW (mm) Qty Order Code Price
300 1 set TS8602.030 £21.55400 1 set TS8602.040 £22.60
Enclosure Pack ListD (mm) Qty Order Code Price
200mm high
Technical specificationMaterialEnclosure . . . . . . . . . . . . Steel, 1.5mmDoor . . . . . . . . . . . . . . . Steel, 2.0mm
all-round foamed-in PU sealMounting plate . . . . . . . Steel, 3.0mm
Surface finishEnclosure and door . . . Dipcoat-primed
powder coated on the outside,textured paint
Mounting plate . . . . . . . . . Zinc platedColour . . . . . . . . . . . . . . . . . . RAL 7035Protection category . . . IP55 to IEC60529
complies with NEMA 12 provided suitable gland plates are selected
Approvals=UL= cUL= CSA= TÜV= Lloyds Register of Shipping
Includes:= CM compact system enclosure= Single door enclosures include aninterchangeable door hinge
= 3-point lock=Mounting plate
Please remember to order your
gland plates or trim panels! For more information on heating and cooling options
contact the sales office on 01254 685900
1
2
3
Includesmounting
plate
Enclosures & LED Lightingwww.lcautomation.com
181Check latest prices and stock availability @ www.lcautomation.com
CM – Compact system enclosure accessories
400 2 CM5001.370 £20.98300 2 CM5001.371 £17.98
Enclosure Pack ListD (mm) Quantity Order Code PriceEnclosure Pack ListD (mm) Qty Order Code Price
300 4 TS8612.130 £26.01400 4 TS8612.140 £37.63500 4 TS8612.150 £41.14600 4 TS8612.160 £48.51800 4 TS8612.180 £53.80
1000 4 TS8612.100 £74.021200 4 TS8612.120 £84.81
Enclosure Pack ListD (mm) Quantity Order Code PriceEnclosure Pack ListW/D (mm) Qty Order Code Price
300 4 TS8612.030 £26.49400 4 TS8612.040 £38.15500 4 TS8612.050 £41.64600 4 TS8612.060 £48.99800 4 TS8612.080 £54.25
1000 4 TS8612.000 £74.451200 4 TS8612.020 £85.24
Enclosure Pack ListD (mm) Quantity Order Code PriceEnclosure Pack ListW/D (mm) Qty Order Code Price
TS punched section with 17 x 73mm mounting flange
Base configuration rail
600 4 CM5001.050 £25.01800 4 CM5001.051 £30.23
1000 4 CM5001.052 £35.441200 4 CM5001.053 £36.961400 4 CM5001.054 £41.72
Enclosure Pack ListD (mm) Quantity Order Code PriceEnclosure Pack ListW(mm) Qty Order Code Price
Rail for interior installationFor height/width
500 35 355 210 TS4115.500 £20.73
500 90 355 210 TS4115.000 £25.74
600 35 455 210 TS4116.500 £22.22
600 90 455 210 TS4116.000 £26.40
800 35 655 210 TS4118.500 £25.19
800 90 655 210 TS4118.000 £30.60
To fit door Clearance opening ListW (mm) D (mm) W (mm) H (mm) Order Code Price
Steel wiring plan pockets
400 290 20 TS4594.000 £39.81500 390 20 TS4309.000 £49.61600 490 20 TS4596.000 £59.01800 690 20 TS4598.000 £67.23900 790 20 TS4579.000 £72.22
1000 890 20 TS4599.000 £78.98
Door L Pack Order ListW(mm) (mm) Qty Code Price
Support strips for door
600 499 1 CM5001.080 £9.94800 699 1 CM5001.081 £10.60
1000 899 1 CM5001.082 £11.101200 1099 1 CM5001.083 £11.79
Enclosure L Pack Order ListW(mm) (mm) Qty Code Price
Cable clamp rails forstrain relief
600 400 CM5001.310 £75.17800 400 CM5001.330 £81.16
1000 400 CM5001.350 £87.121200 400 CM5001.360 £94.47
EnclosureW D List
(mm) (mm) Order Code Price
Rain canopy
45
67
8
9
10
Cable gland platesSteel with zinc-plated surface finish.
Available in 1 or 2 pieces,suitable for cable glands(Includes assembly parts)
You may need to order . . .
1
Cable clamp railsFor strain relief with cable entry. Thelength of the cable clamp rail is tailoredto the width of the mounting plate. (Includes two mounting brackets and
assembly screws)
6
Base configuration railFor mounting in the enclosure depthusing the existing threaded bolts,
no machining required.TS system punchings on two sides.Creates additional installation options.
(Includes assembly parts)
7
Base/plinth componentsFront and rear
100mm or 200mm highPre-configured with corner pieces. Sized to suit enclosure width
Base/plinthSide trim panels100mm or 200mm high
For mounting between the front andrear base/plinth components.Sized to suit enclosure depth
2
3
Interior railsFor mounting in the enclosure
(no machining required). Suitable forall-round mounting on the sides, baseand roof areas. Variable with 2 rows of
system punchings.
4
Support strips for doorUsed for attaching cable ducts, cableconduit holders etc. 4.5mm diameterhole on a 25mm DIN pitch pattern.
(Includes screws)
5
TS punched sectionwith 17 x 73mm mounting flangeFor outer/inner mounting levelVariable, with 5 rows of holes for
universal skeleton structures or partialassembly. Simply locate into the TS punchings and secure.(Includes assembly screws)
8
Wiring plan pocketsFor fastening to tubular door frames atany height. (Includes assembly screws)
10
Rain canopyReliable protection for outdoor sitingwith water run-off to the rear.
(Includes assembly parts)
9
For inner mounting levelFor outer mounting level
Enclosures & LED Lighting www.lcautomation.com
Call Blackburn – 01254 685900 or Chippenham – 01249 460099182
SE8 – Enclosure system
Technical specificationMaterialEnclosure . . . . . . . . . . . . . Steel, 1.5mmDoor . . . . . . . . . . . . . . . . Steel, 2.0mmRear panel and gland plates . . . . . . . . . . Steel, 1.5mmMounting plate . . . . . . . . Steel, 3.0mmSurface finishEnclosure, door/double doorand rear panel . . . . . . Dipcoat-primed
powder-coated on the outsidetextured paint
Mounting plate and gland plates . . . . . . . . . . . . Zinc-plated
Colour . . . . . . . . . . . . . . . . . . RAL 7035Protection category . . IP55 to IEC 60529
complies with NEMA 12
600 1800 400 499 1696 1 SE5830.500 £466.48
800 1800 400 699 1696 1 SE5831.500 £517.70
800 2000 400 699 1896 1 SE5832.500 £554.18
800 2000 500 699 1896 1 SE5833.500 £584.44
800 2000 600 699 1896 1 SE5834.500 £602.30
1000 1800 400 899 1696 2 SE5840.500 £651.16
1200 1800 400 1099 1696 2 SE5841.500 £675.43
1200 2000 400 1099 1896 2 SE5843.500 £783.82
1200 2000 500 1099 1896 2 SE5844.500 £804.43
1200 2000 600 1099 1896 2 SE5845.500 £826.45
1600 1800 400 1499 1696 2 SE5842.500 £877.67
1800 2000 500 1699 1896 2 SE5846.500 £1,132.47
Dimensions (mm) Mounting Plate (mm) No. ofW H D W H Doors Order Code List Price
Enclosures
Includes:= SE8 enclosure system with double-bitlock insert
= Single door enclosures include aninterchangeable door hinge
=Mounting plate= Gland plates= Rear panel (in two pieces from awidth of 1600mm)
=Detachable rear panel
100mm plinth
600 1 set TS8601.600 £28.80800 1 set TS8601.800 £29.74
1000 1 set TS8601.000 £38.651200 1 set TS8601.200 £39.481600 1 set TS8601.920 £42.551800 1 set TS8601.980 £55.07
Enclosure Pack ListW (mm) Qty Order Code Price
400 1 set TS8601.040 £16.21500 1 set TS8601.050 £17.59600 1 set TS8601.060 £19.74
Enclosure Pack ListD (mm) Qty Order Code Price
100mm plinthBase/plinth components front and rear (RAL 7022)
Base/plinth side trim panels (RAL 7022)
1 Set = 2 base/plinth side trim panels including parts for attaching to the base/plinth components
1 Set = 2 base/plinth components, 4 cover caps, 4 screws and captive nuts M12 for mounting on the enclosure
200mm plinth
600 1 set TS8602.600 £46.50800 1 set TS8602.800 £57.17
1000 1 set TS8602.000 £73.601200 1 set TS8602.200 £79.841600 1 set TS8602.920 £99.411800 1 set TS8602.980 £113.44
Enclosure Pack ListW (mm) Qty Order Code Price
400 1 set TS8602.040 £22.60500 1 set TS8602.050 £25.10600 1 set TS8602.060 £27.13
Enclosure Pack ListD (mm) Qty Order Code Price
200mm plinth
400 4 TS8612.040 £38.15500 4 TS8612.050 £41.64600 4 TS8612.060 £48.99
Enclosure Pack ListD (mm) Quantity Order Code PriceEnclosure Pack ListD (mm) Qty Order Code Price
400 4 TS8612.140 £37.63500 4 TS8612.150 £41.14600 4 TS8612.160 £48.51
Enclosure Pack ListD (mm) Quantity Order Code PriceEnclosure Pack ListD (mm) Qty Order Code Price
TS punched section with mounting flangeFor inner mounting levelFor outer mounting level
1
2
3
The SE8 range is alsoavailable in stainless steel – see pages 192-193
Includesmounting
plate
Approvals=UL= cUL
LED System Lights
www.lcautomation.com
See page205
Enclosures & LED Lightingwww.lcautomation.com
183Check latest prices and stock availability @ www.lcautomation.com
SE8 – Enclosure system accessories
4 PS4568.000 £17.91
Pack ListQuantity Order Code Price
Roof eyebolts
600 2 5 TS8800.060 £28.92
800 2 8 TS8800.080 £36.84
1000 4 4 TS8800.100 £43.05
1200 4 6 TS8800.120 £58.37
Enclosure Cut-outs ListW (mm) Pack Quantity per plate Order Code Price
Base cable entry plates
600 2 PS4191.000 £36.54
800 2 PS4192.000 £37.99
1000 2 PS4336.000 £46.79
1200 2 PS4196.000 £46.68
1600 2 PS4338.000 £66.99
1800 2 PS4339.000 £71.88
Enclosure Pack ListW (mm) Qty Order Code Price
Cable clamp rails
Punched section withmounting flange
Roof eyebolts
Base cable entry plate
6-12 25 SZ2350.000 £43.4612-16 25 SZ2351.000 £45.3514-18 25 SZ2352.000 £46.8118-22 25 SZ2353.000 £48.3922-26 25 SZ2354.000 £51.2226-30 25 SZ2355.000 £55.4230-34 25 SZ2356.000 £60.0934-38 25 SZ2357.000 £62.7338-42 25 SZ2358.000 £65.2442-46 25 SZ2359.000 £68.6146-50 25 SZ2360.000 £70.30
Cable Pack ListØ (mm) Qty Order Code Price
Cable clamps
You may need to order . . .
Base/plinth componentsFront and rear
100mm or 200mm highPre-configured with corner pieces. Sized to suit enclosure width
Base/plinthSide trim panels 100mm or 200mm high
For mounting between the front andrear base/plinth components.Sized to suit enclosure depth
1
4 5
6
7
2
TS punched sectionwith 17 x 73mm mounting flangeFor outer/inner mounting levelVariable, with 5 rows of holes for
universal skeleton structures or partialassembly. Simply locate into the TS punchings and secure.(Includes assembly screws)
3
Cable clamp railsFor strain relief with cable entry. Depthvariable mounting on a 25mm pitchpattern on the horizontal enclosure
section or in side base/plinth trim panels. (Includes assembly parts)
4
Cable clamps(For cable clamp rails)
Used for fastening the cables to the cableclamp rails. Steel with zinc-plated surface
finish. (Includes plastic insert)
5
Roof eyeboltsUsed for crane transportation ofenclosures. Thread M12.
6
Base cable entry platesSuitable for cable entry grommetsand connector grommets insteadof segments of the standard
divided gland plates. (Includes assembly parts)
7
www.lcautomation.com
See pages 194-195
Hygienic design enclosuresand accessories
Enclosures & LED Lighting www.lcautomation.com
Call Blackburn – 01254 685900 or Chippenham – 01249 460099184
TS8 – Baying enclosures
Technical specificationMaterialEnclosure frame, roof, rear panel and gland plates . . . . . . Steel, 1.5 mmDoor . . . . . . . . . . . . . . . . Steel, 2.0 mmMounting plate . . . . . . . . Steel, 3.0 mmSurface finishEnclosure frame . . . . . . Dipcoat-primedDoor, roof and rear panel . . . . . . Dipcoat-primed powder coated
on the outside, textured paintMounting plate andgland plates . . . . . . . . . . . . Zinc plated
Colour . . . . . . . . . . . . . . . . . . RAL 7035Protection category . . IP55 to IEC60529
complies with NEMA 12
Approvals=UL= cUL= CSA= TÜV=Norske Veritas= Russian Maritime Register of Shipping= Lloyds Register of Shipping= Bureau Veritas
Includes:= TS8 baying enclosure= 3mm double-bit lock insert= Gland plates=Mounting plates*
= Rear panel (back plate)= Roof plate= 4 eyebolts
400 1800 500 — — 49.2 1 – TS8485.510 £306.70
400 1800 600 — — 51.7 1 4 TS8486.510 £327.89
400 2000 500 — — 60.7 1 – TS8405.510 £323.59
400 2000 600 — — 55.7 1 4 TS8406.510 £339.27
600 1200 500 499 1096 74.5 1 – TS8615.500 £401.98
600 1400 500 499 1296 86.0 1 – TS8645.500 £411.36
600 1600 500 499 1496 100.0 1 – TS8665.500 £471.26
600 1800 400 499 1696 91.3 1 – TS8684.500 £407.15
600 1800 500 499 1696 93.8 1 – TS8685.500 £444.34
600 1800 600 499 1696 96.8 1 4 TS8686.500 £486.38
600 2000 400 499 1896 99.0 1 – TS8604.500 £440.78
600 2000 500 499 1896 101.3 1 – TS8605.500 £472.12
600 2000 600 499 1896 104.0 1 4 TS8606.500 £494.67
600 2000 800 499 1896 111.3 1 4 TS8608.500 £547.81
600 2200 600 499 2096 113.1 1 4 TS8626.500 £525.86
800 1200 500 699 1096 92.1 1 – TS8815.500 £435.59
800 1400 500 699 1296 107.5 1 – TS8845.500 £444.34
800 1600 500 699 1496 103.0 1 – TS8865.500 £509.17
800 1800 400 699 1696 113.5 1 – TS8884.500 £463.66
800 1800 500 699 1696 115.8 1 – TS8885.500 £479.25
800 1800 500 699 1696 122.5 2 – TS8880.500 £535.70
800 1800 600 699 1696 120.3 1 4 TS8886.500 £534.93
800 1800 600 699 1696 125.8 2 4 TS8881.500 £568.68
800 2000 400 699 1896 124.0 1 – TS8804.500 £494.67
800 2000 500 699 1896 126.3 1 – TS8805.500 £505.35
800 2000 600 699 1896 130.5 1 4 TS8806.500 £517.58
800 2000 800 699 1896 137.0 1 4 TS8808.500 £594.85
800 2200 600 699 2096 139.3 1 4 TS8826.500 £564.69
1000 1800 400 899 1696 136.4 1 – TS8084.500 £570.64
1000 1800 400 899 1696 140.0 2 – TS8080.500 £634.92
1000 2000 400 899 1896 152.8 2 – TS8004.500 £654.30
1000 2000 500 899 1896 157.1 2 – TS8005.500 £661.05
1000 2000 600 899 1896 161.2 2 4 TS8006.500 £687.85
1200 1200 500 1099 1096 140.0 2 – TS8215.500 £612.45
1200 1400 500 1099 1296 163.5 2 – TS8245.500 £627.29
1200 1600 500 1099 1496 159.3 2 – TS8265.500 £725.07
1200 1800 400 1099 1696 170.6 2 – TS8284.500 £618.60
1200 1800 500 1099 1696 173.3 2 – TS8285.500 £670.68
1200 1800 600 1099 1696 179.9 2 4 TS8286.500 £750.96
1200 2000 400 1099 1896 184.5 2 – TS8204.500 £708.08
1200 2000 500 1099 1896 190.6 2 – TS8205.500 £719.80
1200 2000 600 1099 1896 194.6 2 4 TS8206.500 £733.42
1200 2000 800 1099 1896 203.0 2 4 TS8208.500 £854.47
1200 2200 600 1099 2096 208.0 2 4 TS8226.500 £820.27
Dimensions (mm) Mounting Plate (mm) Weight No. of Support ListW H D W H (kg) Doors Strips fitted Order Code Price
Enclosures
*Except 400mm wide enclosures Without tubular door frame, mounting plate and gland plates. Protection category IP55 and NEMA 12 are not met.
The TS range is alsoavailable in stainless steel – see pages 190-191
Includesmountingplate*
LED System Lights
www.lcautomation.com
See page 205
Enclosures & LED Lightingwww.lcautomation.com
185Check latest prices and stock availability @ www.lcautomation.com
1800 1 TS8614.180 £169.75
2000 1 TS8614.200 £180.82
Fixing kit – 4 bolt kits TS5050.063 £30.26
Enclosure Pack ListH (mm) Qty Order Code Price
Mounting plates(For 400mm wide enclosures)
100mm high
400 1 set TS8601.400 £26.51
600 1 set TS8601.600 £28.80
800 1 set TS8601.800 £29.74
1000 1 set TS8601.000 £38.65
1200 1 set TS8601.200 £39.48
Enclosure Pack ListW (mm) Qty Order Code Price
400 1 set TS8601.040 £16.21
500 1 set TS8601.050 £17.59
600 1 set TS8601.060 £19.74
800 1 set TS8601.080 £26.14
Enclosure Pack ListD (mm) Qty Order Code Price
400 1 set TS8602.040 £22.60
500 1 set TS8602.050 £25.10
600 1 set TS8602.060 £27.13
800 1 set TS8602.080 £38.65
Enclosure Pack ListD (mm) Qty Order Code Price
400 1 set TS8602.400 £43.92
600 1 set TS8602.600 £46.50
800 1 set TS8602.800 £57.17
1000 1 set TS8602.000 £73.60
1200 1 set TS8602.200 £79.84
Enclosure Pack ListW (mm) Qty Order Code Price
100mm highBase/plinth components, front and rear (RAL 7022)
Base/plinth side trim panels (RAL 7022)
1 Set = 2 base/plinth side trim panels including parts for attaching to the base/plinth components
1 Set = 2 base/plinth components, 4 cover caps, 4 screws and captive nuts M12 for mounting on the enclosure
200mm high
200mm high
400 1 TS8800.845 £9.84
500 1 TS8800.855 £10.77
600 1 TS8800.865 £11.83
800 1 TS8800.885 £13.66
Enclosure Pack ListD (mm) Qty Order Code Price
Baying cover top
1800 TS4590.700 £53.11
2000 TS4591.700 £51.75
2200 TS4592.700 £62.11
Enclosure ListH (mm) Order Code Price
Mounting plate infill
continued on next page
TS8 – Baying enclosure accessories
1200 500 2 TS8115.235 £84.81
1400 500 2 TS8145.235 £87.66
1600 500 2 TS8165.235 £96.91
1800 400 2 TS8184.235 £93.29
1800 500 2 TS8185.235 £106.43
1800 600 2 TS8186.235 £117.99
2000 400 2 TS8104.235 £93.87
2000 500 2 TS8105.235 £107.72
2000 600 2 TS8106.235 £112.81
2000 800 2 TS8108.235 £139.31
2200 600 2 TS8126.235 £126.26
H D Pack Order List(mm) (mm) Qty Code Price
Side panels
Mounting plates Required for
400mm wide enclosures
+ Fixing kit (4 bolt kits)
Mounting plate infillFor continuous mounting surface
in bayed sites where the mounting plate is set forward
(Includes assembly parts)
Side panelsScrew-fastened, Steel with automatic
potential equalisation(Includes assembly parts)
You may need to order . . .
Base/plinth componentsFront and rear
100mm or 200mm highPre-configured with corner pieces. Sized to suit enclosure width
Base/plinthSide trim panels100mm or 200mm high
For mounting between the front andrear base/plinth components.Sized to suit enclosure depth
Baying cover topfor bayed enclosures
A cover with two end caps which can beclipped over the seal between the twoenclosures, preventing dirt and liquidfrom collecting on the baying seal
TS punched sectionwith 17 x 73mm mounting flangeFor outer/inner mounting levelVariable, with 5 rows of holes for
universal skeleton structures or partialassembly. Simply locate into the TS punchings and secure.(Includes assembly screws)
Steelwiring plan pockets
For fastening to tubular door frames atany height. (Includes assembly screws)
Divider panelsFor shielding individual enclosure cells.The divider panel may also be fitted atthe rear. (Includes assembly parts)
General accessoriesHinges, brackets, clamps, door stays etc
1
2
3
4
5
7
1800 400 TS8609.840 £51.37
1800 500 TS8609.850 £60.98
1800 600 TS8609.860 £70.36
2000 400 TS8609.040 £64.36
2000 500 TS8609.050 £70.36
2000 600 TS8609.060 £76.98
2000 800 TS8609.080 £89.54
2200 600 TS8609.260 £83.16
Enclosure ListH (mm) D (mm) Order Code Price
Divider panels6
1
3
4
5
7
8
6
9
10
2
Do the Rittal TS range of enclosures include a back plate?Yes, for all enclosures except the 400mm wide version. Rittal call theback plate a mounting plate and it is shipped inside the enclosure.FAQ
Enclosures & LED Lighting www.lcautomation.com
Call Blackburn – 01254 685900 or Chippenham – 01249 460099186
TS8 – Baying enclosure accessories (continued)
400 4 TS8612.040 £38.15500 4 TS8612.050 £41.64600 4 TS8612.060 £48.99800 4 TS8612.080 £54.25
1000 4 TS8612.000 £74.451200 4 TS8612.020 £85.24
Enclosure Pack ListD (mm) Quantity Order Code Price
EnclosureW or D Pack List(mm) Qty Order Code Price
400 4 TS8612.140 £37.63500 4 TS8612.150 £41.14600 4 TS8612.160 £48.51800 4 TS8612.180 £53.80
1000 4 TS8612.100 £74.021200 4 TS8612.120 £84.81
Enclosure Pack ListD (mm) Quantity Order Code Price
EnclosureW or D Pack List(mm) Qty Order Code Price
TS punched section with 17 x 73mm mounting flangeFor inner mounting levelFor outer mounting level
Mounting plate fixing kit 4 bolt kits TS5050.063 £30.26
Door stay (bottom assembly) 5 TS4583.000 £36.80
180º hinges 4 TS8800.190 £38.08
Wiring plan lectern for door 1 TS4120.000 £37.57
Combination angle, lifting eye for bayed enclosures 4 TS4540.000 £23.24
Baying brackets 4 TS4582.500 £21.46
Baying clamp, vertical 6 TS8800.410 £11.50
Angular baying brackets 4 TS8800.430 £12.65
Quick fit baying clamp 6 TS8800.500 £11.79
Pack ListDescription Qty Order Code Price
Accessories
600 35 455 210 TS4116.500 £22.22600 90 455 210 TS4116.000 £26.40800 35 655 210 TS4118.500 £25.19800 90 655 210 TS4118.000 £30.60
1000 90 855 210 TS4124.000 £35.96
To fit door Plan pocket Clearance opening ListW (mm) D (mm) W (mm) H (mm) Order Code Price
Steel wiring plan pockets
TS punched sectionwith mounting flange
Baying cover top forbayed enclosures
Side panelsMounting plates
Steel wiringplan pockets
180º hinges
Bayingbrackets
Bayingbrackets
Angularbayingbrackets
8
9
1
3
4
5
6
10
10
Ordering Example
Requirements:
Enclosure1000 x 2000 x 500mm (w x h x d)
+ Mounting plates
+ Side panels
+ 200mm front and rearplinth
+ Side trim panels
+ Divider panel
+ Door stay
Parts order:
Enclosure TS8005.500
Mounting plates Included with enclosure
Side panels TS8105.235
Front and rear plinth TS8602.000
Side trim panels TS8602.050
Divider panel TS8609.050
Door stay TS4583.000
TOTAL ORDER = £974.63
Transporting bayed enclosures
Example A Example B
Angular baying brackets are used for a stableconnection when transporting bayedenclosures. Where they cannot be fitted dueto installed equipment it is necessary to fitextra baying brackets – see example B
For protection category IP 55One additional quick-fit baying clamp isrequired half-way up the enclosure height.
n Angular baying brackets – TS8800.430
n Quick-fit baying clamps – TS8800.500
n Baying brackets – TS4582.500
Enclosures & LED Lightingwww.lcautomation.com
187Check latest prices and stock availability @ www.lcautomation.com
Material: Steel, 2mm
150 137 TS 35/7.5 10 SZ2314.000 £24.76200 187 TS 35/7.5 10 SZ2315.000 £27.69300 287 TS 35/7.5 10 SZ2316.000 £36.22400 387 TS 35/7.5 10 SZ2317.000 £35.94
Enclosure Support Rails Pack ListW (mm) L (mm) Design Qty Order Code Price
Support rails (DIN rail) – Length sized to enclosure width
KL – Stainless steel terminal boxes
Technical specificationMaterialEnclosure . . . . . . . . . . . . . . Stainless steel
1.4301 (AISI 304), 1.25mm Cover . . . . . . . . . . . . . . . . .Stainless steel
1.4301 (AISI 304), 1.25mm, all-round foamed-in PU seal
Surface finishEnclosure and cover . . . . . . . . . Brushed,
grain size 240 or 180Protection category . . . IP66 to IEC60529
complies with NEMA 4X
Approvals=UL= cUL= CSA= TÜV=DNV GL= Russian Maritime Register of Shipping= Lloyds Register of Shipping= Bureau Veritas
Terminal boxes
150 150 80 1.3 4 KL1521.010 £96.76
150 150 120 1.6 4 KL1527.010 £114.07
200 200 80 1.8 4 KL1523.010 £115.00
200 200 120 2.2 4 KL1528.010 £129.79
300 150 80 1.8 4 KL1522.010 £116.75
300 200 80 2.4 4 KL1524.010 £133.33
300 200 120 2.9 4 KL1529.010 £156.90
300 300 120 3.9 4 KL1526.010 £163.04
400 200 120 3.6 4 KL1525.010 £151.66
400 300 120 4.6 4 KL1530.010 £186.12
No. ofDimensions (mm) Weight Quick-release List
W H D (kg) Fasteners Order Code Price
150 150 KL1560.700 £4.11
200 200 KL1562.700 £5.50
300 150 KL1561.700 £5.50
300 200 KL1563.700 £6.79
300 300 KL1567.700 £9.30
400 200 KL1564.700 £8.51
400 300 KL1568.700 £11.64
EnclosureW H List
(mm) (mm) Order Code Price
Mounting plates
Wall mounting bracket (8mm wall distance) Stainless steel 4 KL1594.000 £20.82
Wall angle Stainless steel 4 SZ2583.010 £17.65
Pole clamp Steel 1 SZ2584.000 £61.17
Cover hinges Stainless steel 2 KL1592.010 £36.31
Pressure relief stoppers Polyamide 5 SZ2459.500 £17.59
Pack ListDescription Material Qty Order Code Price
Accessories
The KL range is also available in steel – see pages 176-177
Mounting plateFor component installation outside of theenclosure. Assembly screws included as
accessories with the enclosure.
Support rails (DIN rail)TS 35/7.5 or TS 35/15Supplied in two lengths –
Standard 2m orsized to the enclosure width
You may need to order . . .
General accessoriesWall mounting brackets,wall angle, pole clamp,cover hinges and
pressure relief stoppers
1
3
2
1
2
3
Enclosures & LED Lighting www.lcautomation.com
Call Blackburn – 01254 685900 or Chippenham – 01249 460099188
AE – Stainless steel compact enclosures
Technical specificationMaterialEnclosure . . . . . . . . . . . . . . Stainless steelDoor . . . . . . . . . Stainless steel, all-round
foamed-in PU sealMounting plate . . . . . . . . . . . . . . . . SteelLocks . . . . . . . . . . . . . . . . . Die-cast zincSurface finishEnclosure and door . . Brushed grain 400Mounting plate . . . . . . . . . . . Zinc-platedLocks . . . . . . . . . . . . . . . . . Nickel-platedProtection category200-800mm . . . . . . IP66 to IEC 60529,
complies with NEMA 4X1000mm . . . . . . . . . IP55 to IEC 60529,
complies with NEMA 12
Approvals=UL= cUL= CSA= TÜV=DNV GL= Russian Maritime Register of Shipping= Lloyds Register of Shipping= Bureau Veritas
Includes:= AE stainless steel compact enclosure= Cam lock or 3-point lock (for AE 1017.600 and AE1019.600) with double bit insert
=Mounting plate
200 155 SZ2470.000 £53.36300 210 SZ2361.000 £63.33380 155 SZ2471.000 £63.73380 210 SZ2472.000 £61.94500 210 SZ2362.000 £65.09600 210 SZ2473.000 £69.12760 300 SZ2474.000 £89.11800 300 SZ2475.000 £94.65
1000 300 SZ2363.000 £119.45
EnclosureW D List
(mm) (mm) Order Code Price
Rain canopy
210 4 SZ2383.210 £21.71300 4 SZ2383.300 £26.94
Enclosure Pack ListD (mm) Qty Order Code Price
Rails for interior installation
Standard 1 SZ2304.000 £27.31
Hygienic 1 HD2304.010 £35.68
Pack ListType Qty Order Code Price
Cam lock
Wall angle Stainless steel 4 SZ2583.010 £17.65Pole clamp Steel 2 SZ2584.000 £61.17Wall mounting brackets Stainless steel 1.4301 (AISI 304) 4 SZ2433.000 £25.99Wall mounting brackets Stainless steel 1.4404 (AISI 316L) 4 SZ2433.500 £26.59
Pack ListDescription Material Qty Order Code Price
Accessories
200 300 120 1 — 1 3.6 162 275 AE1001.600 £124.14200 300 155 1 — 1 4.1 162 275 AE1002.600 £143.65300 300 210 1 — 1 6.9 254 275 AE1003.600 £156.83300 380 210 1 — 1 8.4 275 334 AE1005.600 £177.03380 300 155 1 — 1 7.4 334 275 AE1004.600 £166.25380 300 210 1 — 1 8.4 334 275 AE1011.600 £169.88380 380 210 1 — 1 9.8 334 355 AE1006.600 £194.94380 600 210 1 — 1 15.1 334 570 AE1008.600 £244.22400 500 210 1 — 1 12.9 354 475 AE1015.600 £228.72500 500 210 1 — 1 15.7 449 470 AE1007.600 £256.00500 500 300 1 — 1 18.4 449 470 AE1013.600 £301.20600 380 210 1 — 1 14.6 549 355 AE1009.600 £243.51600 600 210 1 — 1 23.5 549 570 AE1010.600 £313.06600 760 210 1 — 1 30.2 549 730 AE1012.600 £362.60760 760 300 1 — 1 42.5 704 730 AE1014.600 £519.48800 1000 300 1 — 1 52.9 739 955 AE1016.600 £588.17800 1200 300 — 4 1 61.5 740 1155 AE1017.600 £676.71
1000 1000 300 2 — 2 71.0 939 955 AE1018.600 £752.711000 1200 300 — 4 2 76.0 940 1155 AE1019.600 £815.82
No. of 3-point MountingDimensions (mm) Cam Lock No. of Weight Plate (mm) ListW H D Locks System Doors (kg) W H Order Code Price
Enclosures
Material: Stainless steel 1.4301 (AISI 304)
Material: Stainless steel 1.4301 (AISI 304)
Material: Steel, zinc-plated
Material: Stainless steel
The AE range is alsoavailable in steel – see pages 178-179
Rails for interiorinstallation
For mounting in the enclosure(no machining required). Suitable forall-round mounting on the sides, baseand roof areas. Variable with 2 rows of
system punchings.
Rain canopyReliable protection for outdoor sitingwith water run-off to the rear.
Easily retro-fitted(Includes assembly parts)
You may need to order . . .
Cam locksStandard stainless steel version (madeentirely from stainless steel) or thehygienic version for easy, safe cleaning
1
1 2
3
43
AccessoriesWall angle, pole clamp andwall mounting brackets
4
2
Includesmounting
plate
LED System LightsSee page 205
Enclosures & LED Lightingwww.lcautomation.com
189Check latest prices and stock availability @ www.lcautomation.com
CP – Panel housing – Stainless steel
Technical specificationMaterialEnclosure and door . . . . . . Stainless steel
1.4301 (AISI 304)Handle strips . . . . . . Plastic approved for
use with foodstuffsSurface finish . . . . . . . . Brushed grain 240Handle strips colour . Similar to RAL 5002Protection category . . IP66 to IEC 60529
Includes:= Stainless steel command panelhousing with door
= Cut-out and reinforcement forsupport arm system
= Fastener with guide plate=Door with sealing frame and sidehandle strips
= 3mm double-bit lock insert= The support arm connection anddoor hinge may be swapped over byrotating the enclosure
300 300 150 6.3 CP6535.010 £300.51400 300 150 7.5 CP6536.010 £319.95400 400 150 8.8 CP6538.010 £360.17600 400 150 12.1 CP6539.010 £386.06
Dimensions (mm) Weight ListW H D kg Order Code Price
Command panel housing with door
Mounting plates
Approvals=UL= CSA= TÜV
300 287 TS 35/7.5 10 SZ2316.000 £36.22400 387 TS 35/7.5 10 SZ2317.000 £35.94
Enclosure Support Rails Pack ListW (mm) L (mm) Design Qty Order Code Price
Support rails (DIN rail) – Length sized to enclosure width
1 Supplied with 2 keys, lock no. 3524E
Die-cast zinc 3mm double-bit lock inserts 41mm SZ2483.000 £2.99Plastic handles with lock cylinder insert1 – SZ2485.000 £14.93Plastic handles without lock insert – SZ2485.100 £11.85T handles with lock cylinder insert1 – SZ2535.000 £27.72T handles without lock insert – SZ2536.000 £13.67
ListDescription Length Order Code Price
Alternative lock systems
Material: Stainless steel 1.4301 (AISI 304)
Material: Steel
300 300 5050.432 £18.87
400 300 5050.430 £18.27
400 400 5050.453 £19.39
600 400 5050.436 £28.20
Panel HousingW H List
(mm) (mm) Order Code Price
Enclosures & LED Lighting www.lcautomation.com
Call Blackburn – 01254 685900 or Chippenham – 01249 460099190
1800 400 2 TS8700.840 £240.471800 500 2 TS8700.850 £271.862000 600 2 TS8700.060 £345.82
Enclosure Enclosure Pack ListHeight (mm) Depth (mm) Qty Order Code Price
TS8 – Stainless steel baying enclosures and accessories
Technical specificationMaterialEnclosure frame, roof, rear panel and gland plates . . . . . . . Stainless steel
1.4301 (AISI 304), 1.5mmDoor(s) . . . . . . . . . . . . . . Stainless steel
1.4301 (AISI 304), 2.0mmMounting plate . . . . . . . . Steel, 3.0 mmSurface finishEnclosure frame andgland plates . . . . . . . . . . . . . UncoatedDoor, roof and rear panel . . . . . . Exterior brushed, grain size 400
Mounting plate . . . . . . . . . . . Zinc platedProtection category . . IP55 to IEC60529
complies with NEMA 12
Approvals=UL= cUL= CSA= Russian Maritime Register of Shipping= Lloyds Register of Shipping= Bureau Veritas
Includes:= TS8 stainless steel baying enclosure=Mounting plate= Gland plates= Rear panel= Roof plate= Locking rod with double-bit insert
NOTE: Due to the hardness of thematerial, we recommend using metalmulti-tooth screw SZ2486.300 for theinterior installation.
600 1800 500 499 1696 92.5 1 – TS8457.600 £1,527.50
600 2000 600 499 1896 104.4 1 2 TS8452.600 £1,838.48
800 1800 400 699 1696 112.9 1 – TS8454.600 £1,811.29
800 1800 500 699 1696 116.3 1 – TS8455.600 £1,817.11
800 2000 600 699 1896 129.7 1 2 TS8450.600 £2,104.29
1200 1800 400 1099 1696 170.4 2 – TS8456.600 £2,447.59
1200 1800 500 1099 1696 174.9 2 – TS8453.600 £2,638.30
1200 2000 600 1099 1896 194.7 2 2 TS8451.600 £2,816.72
Dimensions (mm) Mounting Plate (mm) Weight No. of Support ListW H D W H (kg) Doors Strips fitted Order Code Price
Side panels, screw-fastened
1800 400 1 TS8609.840 £51.371800 500 1 TS8609.850 £60.982000 600 1 TS8609.060 £76.98
Enclosure Enclosure Pack ListHeight (mm) Depth (mm) Qty Order Code Price
Divider panels
Material: Steel, 1.5mm, zinc-plated
Material: Stainless steel
Material: Stainless steel 1.4301 (AISI 304)
1800 500 9 TS8609.100 £69.562000 600 10 TS8609.130 £80.39
Enclosure Enclosure No. of ListHeight (mm) Depth (mm) cut-outs Order Code Price
Divider panels for module plates
Material: Steel, 2mm, zinc-plated
600 1 set TS8701.600 £100.46800 1 set TS8701.800 £114.44
1200 1 set TS8701.200 £142.39
Enclosure Pack ListW (mm) Qty Order Code Price
100mm plinthBase/plinth components front and rear
1 Set = Mounting accessories for mounting on theenclosure and 2 trim panels front/rear.Material: Stainless steel, 1.4301 (AISI 304)
1 Set = Mounting accessories for mounting on theenclosure, 2 corner pieces with removable trim paneland 1 trim panel front/rear.Material: Stainless steel, 1.4301 (AISI 304)
600 1 set TS8702.600 £165.75800 1 set TS8702.800 £182.27
1200 1 set TS8702.200 £215.47
Enclosure Pack ListW (mm) Qty Order Code Price
200mm plinth
The TS range is alsoavailable in steel – see pages 184-186
1
2
3
4
Includesmounting
plate
LED System LightsSee page 205
Enclosures & LED Lightingwww.lcautomation.com
191Check latest prices and stock availability @ www.lcautomation.com
TS8 – Stainless steel bayingenclosure accessories (continued)
100mm plinth
400 1 set TS8701.040 £58.63500 1 set TS8701.050 £63.02600 1 set TS8701.060 £67.42
Enclosure Pack ListD (mm) Qty Order Code Price
Base/plinth side trim panels
1 Set = 2 base/plinth trim panels, including parts for attaching to the base/plinth componentsMaterial: Stainless steel, 1.4301 (AISI 304)
200mm plinth
400 1 set TS8702.040 £66.69500 1 set TS8702.050 £75.11600 1 set TS8702.060 £83.29
Enclosure Pack ListD (mm) Qty Order Code Price
400 1 set SO2907.000 £116.00500 1 set SO2908.000 £139.42600 1 set SO2913.000 £133.39
Enclosure Pack ListD (mm) Qty Order Code Price
Base/plinth trim, modular
1 Set = 4 base/plinth trim panels including parts forattaching to the base/plinth componentsMaterial: Stainless steel, 1.4301 (AISI 304)
For cable routing in the stainless steel base/plinth, e.g. if levelling feet SO2889.000 or SO2890.000 are used.Width 175mm.
Note:One base/plinth trim panel is needed per 200mmbase/plinth width.
600 2 PS4191.000 £36.54800 2 PS4192.000 £37.99
1200 2 PS4196.000 £46.68
Enclosure Pack ListW (mm) Qty Order Code Price
Cable clamp rails
Material: Steel, zinc-plated
Material: Steel, colour: RAL 7035
600 5 2 TS8800.060 £28.92800 8 2 TS8800.080 £36.84
1200 6 4 TS8800.120 £58.37
Enc Cut-outs Pack Order ListW(mm) per plate Qty Code Price
Cable entry plates
Material: Steel, zinc-plated
600 90 455 210 TS4116.000 £26.40800 90 655 210 TS4118.000 £30.60
To fit door Clearance opening ListW (mm) D (mm) W (mm) H (mm) Order Code Price
Wiring plan pockets
6-12 25 SZ2350.000 £43.4612-16 25 SZ2351.000 £45.3514-18 25 SZ2352.000 £46.8118-22 25 SZ2353.000 £48.3922-26 25 SZ2354.000 £51.2226-30 25 SZ2355.000 £55.4230-34 25 SZ2356.000 £60.0934-38 25 SZ2357.000 £62.7338-42 25 SZ2358.000 £65.2442-46 25 SZ2359.000 £68.6146-50 25 SZ2360.000 £70.30
Cable Pack ListØ (mm) Qty Order Code Price
Cable clamps
Side panelsScrew-fastened, stainless steel withautomatic potential equalisation
(Includes assembly parts)
Divider panelsFor shielding individual enclosure cells.The divider panel may also be fitted atthe rear. (Includes assembly parts)
Divider panels formodule plates
With cut-outs for the installation ofmodule plates for connectors or for
cable entry. (Includes assembly parts andmulti-tooth screws)
You may need to order . . .
Base/plinth componentsfront and rear
100mm or 200mm highPre-configured with corner pieces. Sized to suit enclosure width
Base/plinthside trim panels
100mm or 200mm highFor mounting between the front andrear base/plinth components.Sized to suit enclosure depth
Cable clamp railsFor strain relief with cable entry.
Depth variable mounting on a 25mmpitch pattern on the horizontal enclosuresection or in side base/plinth trim panels
with assembly bolts.(Includes assembly parts)
Cable clampsFor cable clamp railsFor fastening the cables to the
cable clamp rails.(Includes plastic insert)
Cable entry platesFor fastening to tubular door frames atany height. (Includes assembly parts)
Base/plinth trim, modularFor cable routing in the stainless steelbase/plinth. Note: One base/plinth trimpanel is needed per 200mm base/plinthwidth (Includes 4 base/plinth trim panels)
1
5
6
78
9
10
3
4
5
7
8
6
9
Wiring plan pocketsFor fastening to tubular door frames atany height. (Includes assembly screws)
10
2
Divider panel
Base/plinth trim
Side trim panels Component front and rear
Wiring plan pocketCable clamp rails
Enclosures & LED Lighting www.lcautomation.com
Call Blackburn – 01254 685900 or Chippenham – 01249 460099192
100mm plinth
400 1 set TS8701.040 £58.63500 1 set TS8701.050 £63.02600 1 set TS8701.060 £67.42
Enclosure Pack ListD (mm) Qty Order Code Price
Base/plinth side trim panels
1 Set = 2 base/plinth trim panels, including parts for attaching to the base/plinth components
Material: Stainless steel, 1.4301 (AISI 304)
200mm plinth
400 1 set TS8702.040 £66.69500 1 set TS8702.050 £75.11600 1 set TS8702.060 £83.29
Enclosure Pack ListD (mm) Qty Order Code Price
600 1 set TS8701.600 £100.46
800 1 set TS8701.800 £114.44
1000 1 set TS8701.000 £113.35
1200 1 set TS8701.200 £142.39
Enclosure Pack ListW (mm) Qty Order Code Price
100mm plinthBase/plinth components front and rear
1 Set = Mounting accessories for mounting on theenclosure and 2 trim panels front/rear.Material: Stainless steel, 1.4301 (AISI 304)
1 Set = Mounting accessories for mounting on theenclosure, 2 corner pieces with removable trim paneland 1 trim panel front/rear.
Material: Stainless steel, 1.4301 (AISI 304)
600 1 set TS8702.600 £165.75
800 1 set TS8702.800 £182.27
1000 1 set TS8702.000 £200.06
1200 1 set TS8702.200 £215.47
Enclosure Pack ListW (mm) Qty Order Code Price
200mm plinth
SE8 – Stainless steel system enclosures and accessories
Technical specificationMaterialEnclosure and rear panel . Stainless steel
1.4301 (AISI 304), 1.5mmDoor(s) . . . . . . . . . . . . . . Stainless steel
1.4301 (AISI 304), 2.0mmMounting plate . . . . . . . . Steel, 3.0mmSurface finishEnclosure, rear panel, gland plate and door(s) . . . . . . Brushed, grain 400
Mounting plate . . . . . . . . . . . Zinc platedProtection category . . IP55 to IEC60529
complies with NEMA 12
Includes:= SE8 stainless steel system enclosure=Door(s)= Rear panel, detachable= 130º hinges=Mounting plate= Gland plates, divided= Locking rod with double-bit insert
NOTE: Due to the hardness of thematerial, we recommend using metalmulti-tooth screw SZ2486.300 for theinterior installation.
600 1600 400 499 1496 87.0 1 SE5850.500 £1,599.88
600 1800 500 499 1696 99.0 1 SE5851.500 £1,674.86
800 1800 500 699 1696 121.0 1 SE5852.500 £1,920.54
800 2000 600 699 1896 139.0 1 SE5853.500 £2,286.98
1000 1800 400 899 1696 133.0 1 SE5854.500 £2,161.45
1200 2000 500 1099 1896 196.0 2 SE5855.500 £2,973.74
Dimensions (mm) Mounting Plate (mm) Weight No. of ListW H D W H (kg) Doors Order Code Price
Material: Stainless steel 1.4301 (AISI 304)
Components front and rear
Side trim panels
400 4 TS8612.040 £38.15500 4 TS8612.050 £41.64600 4 TS8612.060 £48.99
Enclosure Pack ListD (mm) Quantity Order Code PriceEnclosure Pack ListD (mm) Qty Order Code Price
400 4 TS8612.140 £37.63500 4 TS8612.150 £41.14600 4 TS8612.160 £48.51
Enclosure Pack ListD (mm) Quantity Order Code PriceEnclosure Pack ListD (mm) Qty Order Code Price
Punched section with mounting flangeFor inner mounting levelFor outer mounting level
Material: Steel, zinc-plated Material: Steel, zinc-plated
The SE range is alsoavailable in steel – see pages 182-183
1
2
3
Includesmounting
plate
Approvals=UL= cUL
LED System Lights
www.lcautomation.com
See page 205
Enclosures & LED Lightingwww.lcautomation.com
193Check latest prices and stock availability @ www.lcautomation.com
SE8 – Stainless steel bayingenclosure accessories(continued)
4 PS4568.000 £17.91
Pack ListQty Order Code Price
Roof eyebolts
600 2 PS4191.000 £36.54
800 2 PS4192.000 £37.99
1000 2 PS4336.000 £46.79
1200 2 PS4196.000 £46.68
Enclosure Pack ListW (mm) Qty Order Code Price
Cable clamp rails
Material: Steel, zinc-plated
Thread: M12
Please contact sales on 01254 685900for alternative locking systems
6-12 25 SZ2350.000 £43.4612-16 25 SZ2351.000 £45.3514-18 25 SZ2352.000 £46.8118-22 25 SZ2353.000 £48.3922-26 25 SZ2354.000 £51.2226-30 25 SZ2355.000 £55.4230-34 25 SZ2356.000 £60.0934-38 25 SZ2357.000 £62.7338-42 25 SZ2358.000 £65.2442-46 25 SZ2359.000 £68.6146-50 25 SZ2360.000 £70.30
Cable Pack ListØ (mm) Qty Order Code Price
Cable clamps
Wall mounting brackets – Stainless steel
Bracket AFor the attachment of KL, EB, BG and IT enclosures based on EL.
Stainless steel, 1.4301 (AISI 304) 8 4 KL1594.000 £20.82
Wall Pack ListMaterial distance (mm) Qty Order Code Price
Stainless steel, 1.4301 (AISI 304) 10 4 SZ2433.000 £25.99Stainless steel, 1.4401 (AISI 316L) 10 4 SZ2433.500 £26.59
Wall Pack ListMaterial distance (mm) Qty Order Code Price
Bracket BFor mounting KL, EB, BG, AE, CM, IT enclosures based on EL and AE, TP consoles andsmall fibreoptic distributors.
NOTE: For hygiene reasons, and in viewof the protection category, the stainlesssteel enclosures do not have any drilledholes for the wall mounting brackets.
Bracket A Bracket B
Punched section withmounting flange
Roof eyeboltsCable clamps
You may need to order . . .
Base/plinth componentsfront and rear
100mm or 200mm highPre-configured with corner pieces. Sized to suit enclosure width
Base/plinth side trim panels
100mm or 200mm highFor mounting between the front andrear base/plinth components.Sized to suit enclosure depth
1
4 5
6
2
Punched sectionwith 17 x 73mm mounting flangeFor outer/inner mounting levelVariable, with 5 rows of holes for
universal skeleton structures or partialassembly. Simply locate into the TS punchings and secure.(Includes assembly screws)
3
Cable clamp railsFor strain relief with cable entry. Depthvariable mounting on a 25mm pitchpattern on the horizontal enclosure
section or in side base/plinth trim panels. (Includes assembly parts)
4
Cable clamps(For cable clamp rails)
Used for fastening the cables to thecable clamp rails. Steel with zinc-plated
surface finish. (Includes plastic insert)
5
Roof eyeboltsUsed for crane transportation ofenclosures. Thread M12.
6
Enclosures & LED Lighting www.lcautomation.com
Call Blackburn – 01254 685900 or Chippenham – 01249 460099194
HD – Terminal boxesTechnical specificationMaterialEnclosure and cover . . . Stainless steel
1.4301 (AISI 304) 1.5mmQuick-release fasteners . Stainless steelSeal . . . . . . . . . Silicone, compliant with
FDA guideline 21 CFR 177.2600Surface finishEnclosure and cover . . . . . . . Brushed,
grain 400, RA<0.8mmSeal . . . . . . . . . Blue, dyed (RAL 5010)
Protection category . . IP66 to IEC60529,IP69K to DIN 40050-9
complies with NEMA 13, 4X and 3RIncludes:=Hygienic design terminal box= Cover=Mounting bracket (pre-assembled)= Seal and quick-release locks (supplied loose)
150 172 80 150 172 1.7 HD1670.600 £173.43
150 177 120 150 177 2.2 HD1671.600 £190.34
200 227 120 200 227 3.0 HD1672.600 £203.06
300 327 120 200 227 4.0 HD1674.600 £215.90
400 427 120 200 227 5.0 HD1675.600 £228.57
400 427 120 300 327 5.9 HD1676.600 £247.00
Width (mm) Depth Height (mm) Weight ListFront Rear (mm) Front Rear (kg) Order Code Price
HD – Compact enclosuresTechnical specificationMaterialEnclosure and door . . . . Stainless steel
1.4301 (AISI 304)Mounting plate . . . . . . . . . . . . . . SteelLock inserts HD . . . . . . Stainless steel
1.4404 (AISI 316L)Seal . . . . . . . . . Silicone, compliant with
FDA guideline 21 CFR 177.2600Surface finishEnclosure and door . . . . . . . Brushed,
grain 400, RA<0.8mmMounting plate . . . . . . . . . Zinc platedSeal . . . . . . . . . Blue, dyed (RAL 5010)
Protection category . . IP66 to IEC60529,IP69K to DIN 40050-9
complies with NEMA 13 and 4X
Supply includes:=Hygienic design, single door compactenclosure
=Door with press fitted seal= Interchangeable door hinge=Mounting plate
220 350 437 155 162 275 6.6 HD1302.600 £239.92
390 430 549 210 334 355 14.7 HD1306.600 £336.71
390 650 769 210 334 570 17.9 HD1308.600 £380.18
510 550 669 210 449 470 19.7 HD1307.600 £401.27
610 430 601 300 549 355 19.7 HD1320.600 £413.90
610 650 769 210 549 570 27.4 HD1310.600 £465.79
810 1050 1221 300 739 955 60.1 HD1316.600 £798.32
810 1250 1421 300 740 1155 71.0 HD1317.600 £881.10
Width Height (mm) Mounting Plate (mm) Weight List (mm) Front Rear D W H (kg) Order Code Price
Includesmounting
plate
Approvals=UL= cUL
Approvals=UL= cUL
Enclosures & LED Lightingwww.lcautomation.com
195Check latest prices and stock availability @ www.lcautomation.com
Why use hygiene compatible cable glands?Critical points with conventional solutions
1 Cable entry in front of seal
2 No minimum radii on the hexagon
3 External thread
4 Gap caused by O-ring on the enclosure surface
Hygiene compatible design features
1 Seal directly at the cable entry
2 Compliance with minimum radii on the hexagon
3 No external thread
4 Flush termination between the cap nut and the enclosure
12
3
4
12
34
50 1 HD4000.100 £18.24
Wall Distance Pack List(mm) Qty Order Code Price
Wall spacer bracket – HD
150 150 KL1560.700 £4.11200 200 KL1562.700 £5.50300 200 KL1563.700 £6.79400 200 KL1564.700 £8.51400 300 KL1568.700 £11.64
EnclosureW H List
(mm) (mm) Order Code Price
Mounting plates (terminal box)
Material: Steel, 2mm
150 137 TS 35/7.5 10 SZ2314.000 £24.76200 187 TS 35/7.5 10 SZ2315.000 £27.69300 287 TS 35/7.5 10 SZ2316.000 £36.22400 387 TS 35/7.5 10 SZ2317.000 £35.94
Enclosure Support Rails Pack ListW (mm) L (mm) Design Qty Order Code Price
Support rails (DIN rail) – Length sized to enclosure width
M12 x 1.5 3-6.5 5 Standard HD2410.000 £76.21M16 x 1.5 5-10 5 Standard HD2410.010 £80.39M16 x 1.5 5-10 5 EMC HD2410.110 £97.19M20 x 1.5 6-12 5 Standard HD2410.020 £91.10M20 x 1.5 6-12 5 EMC HD2410.120 £110.35M25 x 1.5 12-17 5 Standard HD2410.030 £111.53M25 x 1.5 12-17 5 EMC HD2410.130 £135.05
Cable Pack ListSize Diameter (mm) Qty Version Order Code Price
Cable gland – HD
1 HD2304.010 £35.68
Pack ListQty Order Code Price
Cam lock – HD 1 set HD2410.290 £18.58
Pack ListQty Order Code Price
Assembly tool – for HD cable gland
510 4 CM5001.050 £25.01710 4 CM5001.051 £30.23910 4 CM5001.052 £35.44
1110 4 CM5001.053 £36.96
Enclosure Pack ListD (mm) Quantity Order Code Price
Rail Pack ListL (mm) Qty Order Code Price
Rails for interior installation
Material: Steel, zinc-plated
1 Set = Adaptor for sizes from M12-M25
Levelling feet – HD
M12 122-175 Without 4 HD4000.240 £173.44
M12 122-175 With 4 HD4000.250 £189.70
Levelling Base Pack ListThread Range (mm) Mount Qty Order Code Price
M12 x 1.5 10 HD2410.200 £14.46M16 x 1.5 10 HD2410.210 £14.90M20 x 1.5 10 HD2410.220 £16.84M25 x 1.5 10 HD2410.230 £20.44
Pack ListSize Qty Order Code Price
Stainless steel lock nut
Enclosure key - HD 1 HD2549.600 £2.67
Bit HD lock for universal key 2549.500 1 HD2549.510 £2.40
Pack ListDescription Qty Order Code Price
Keys/locks – HD
HD – Accessories
Levelling feet – HD
Wall spacer brackets Enclosure key
Enclosures & LED Lighting www.lcautomation.com
Call Blackburn – 01254 685900 or Chippenham – 01249 460099196
Enclosure section
CP40 – Stainless steel support arm system Technical specificationSizeExternal diameter . . . . . . . . . .48.3mmWall thickness . . . . . . . . . . . . . 3.6mmMaterial . . . . . . . . . . . . . . . . Stainless steelSurface finish . . . . . . . . Brushed grain 240
(support section and wall console only)Protection category . . . . . . . . . . IP69K to
DIN 40 050-9(resistant to high pressure cleaning)
Tilting adaptor 10º – 4 – 0.7 1.4305 CP6664.100 £84.42(AISI 303)
Mounting bracket – 4 – 1.3 1.4305 CP6664.500 £62.65(AISI 303)
Coupling 4 – – 1.1 1.4305 CP6664.000 £125.29(AISI 303)
Angle piece 90º – 4 – 1.3 1.4305 CP6664.300 £73.99(AISI 303)
Rotating/ Length Weight ListDescription Tilting Rigid mm kg Material Order Code Price
The CP40 - Stainless steel supportarm system is attached to theconnection components via 2clamping screws.
Wall section
Angle piece 90º – 4 – 1.3 1.4305 CP6664.300 £73.99(AISI 303)
Wall/base rigid mounting bracket – 4 – 1.7 1.4305 CP6663.000 £143.43(AISI 303)
Wall/base swivel mounting bracket
Wall console
4 – – 3.9 1.4305 (AISI 303) CP6663.500 £195.07
4 – – 4.5 1.4305 (AISI 303) CP6663.400 £218.36
– 4 – 1.5 1.4301 (AISI 304) CP6665.000 £194.62
– 4 – 1.8 1.4301 (AISI 304) CP6665.500 £220.24
Rotating/ Length Weight ListDescription Tilting Rigid mm kg Material Order Code Price
Desk section
Support section– 4 500 2.0 1.4301 (AISI 304) CP6660.050 £61.36
– 4 1000 3.9 1.4301 (AISI 304) CP6660.010 £80.15
Rotating/ Length Weight ListDescription Tilting Rigid mm kg Material Order Code Price
Rear: Thread M8 Front: Hole Ø9mm
Rear: Thread M8 Front: Hole Ø9mm
Enclosures & LED Lightingwww.lcautomation.com
197Check latest prices and stock availability @ www.lcautomation.com
250W 250W with fan 4A 103 x 200 x 103mm SK3105.380 £148.29
400W 400W with fan 6A 103 x 200 x 103mm SK3105.390 £158.35
800W 800W with fan 6A 103 x 200 x 103mm SK3105.400 £179.62
Continuous Thermal Pre Fuse Dimensions ListDescription Output at Tu = 10ºC gG (w x h x d) Order Code Price
With fan, continuous thermal output, 240V a.c.
10W 8-10W 2A 45 x 120 x 46mm SK3105.310 £35.07
20W 18-20W 2A 45 x 120 x 46mm SK3105.320 £37.29
30W 23-30W 4A 64 x 155 x 56mm SK3105.330 £49.05
50W 49-50W 4A 64 x 155 x 56mm SK3105.340 £59.39
75W 63-75W 4A 64 x 230 x 56mm SK3105.350 £70.16
100W 86-100W 4A 90 x 165 x 75mm SK3105.360 £85.61
150W 130-150W 4A 90 x 180 x 75mm SK3105.370 £96.19
Continuous Thermal Pre Fuse Dimensions ListDescription Output at Tu = 10ºC T (w x h x d) Order Code Price
Without fan, continuous thermal output, 110-240V a.c.
Enclosure heaters
Includes:= Enclosure heater= PTC heater=Quick connection terminal= Assembly parts
Notes:= For precise temperature controlinside the enclosure, we recommendthe enclosure internal thermostat orthe digital thermostat with display(see accessories table).
= In order to prevent condensation on assemblies, a hygrostat isrecommended to regulate heating(see accessories table).
= In larger enclosures, even heatdistribution is best achieved byinstalling several low-output heaters.
= The installation of heaters is generallyadvisable, in order to preventcondensation.
Digital thermostat with display SK3114.200 £80.01
Enclosure internal thermostat SK3110.000 £24.42
Hygrostat SK3118.000 £79.24
ListDescription Order Code Price
AccessoriesDigital thermostat with display
Enclosure internal thermostat
Hygrostat
Enclosures & LED Lighting www.lcautomation.com
Call Blackburn – 01254 685900 or Chippenham – 01249 460099198
116.5 x 116.5 SK3237.200 £19.35148.5 x 148.5 SK3238.200 £23.79204 x 204 SK3239.200 £26.76255 x 255 SK3240.200 £30.72323 x 323 SK3243.200 £32.45
Dimensions List(mm) Order Code Price
Outlet filters – Standard/EC
116.5 x 116.5 SK3237.060 £52.24148.5 x 148.5 SK3238.060 £68.92204 x 204 SK3239.060 £90.71255 x 255 SK3240.060 £95.63323 x 323 SK3243.060 £106.19
Dimensions List(mm) Order Code Price
Outlet filters – EMC
20-25m3/h 230 50/60 116.5 x 116.5 SK3237.100 £51.9720-25m3/h 115 50/60 116.5 x 116.5 SK3237.110 £55.7620m3/h 24V d.c. - 116.5 x 116.5 SK3237.124 £60.5755-66m3/h 230 50/60 148.5 x 148.5 SK3238.100 £84.7855-66m3/h 115 50/60 148.5 x 148.5 SK3238.110 £90.6155m3/h 24V d.c. - 148.5 x 148.5 SK3238.124 £103.28105-120m3/h 230 50/60 204 x 204 SK3239.100 £99.76105-120m3/h 115 50/60 204 x 204 SK3239.110 £106.60105m3/h 24V d.c. - 204 x 204 SK3239.124 £131.37160-180m3/h 230 50/60 255 x 255 SK3240.100 £99.53160-180m3/h 115 50/60 255 x 255 SK3240.110 £102.16180m3/h 24V d.c. - 255 x 255 SK3240.124 £168.55230-250m3/h 230 50/60 255 x 255 SK3241.100 £108.79230-250m3/h 115 50/60 255 x 255 SK3241.110 £119.56230m3/h 24V d.c. - 255 x 255 SK3241.124 £206.65550-600m3/h 230 50/60 323 x 323 SK3243.100 £139.06550-600m3/h 115 50/60 323 x 323 SK3243.110 £152.61700-770m3/h 230 50/60 323 x 323 SK3244.100 £161.33700-770m3/h 115 50/60 323 x 323 SK3244.110 £169.61700-770m3/h 400-460 3-phase 50/60 323 x 323 SK3244.140 £227.49
Air Throughput Rated Operating Voltage Dimensions ListUnimpeded Air Flow V a.c. Hz (mm) Order Code Price
Fan and filter units – Standard
20-25m3/h 230 50/60 116.5 x 116.5 SK3237.600 £114.3355-66m3/h 230 50/60 148.5 x 148.5 SK3238.600 £166.49105-120m3/h 230 50/60 204 x 204 SK3239.600 £220.43160-180m3/h 230 50/60 255 x 255 SK3240.600 £225.33230-250m3/h 230 50/60 255 x 255 SK3241.600 £247.74550-600m3/h 230 50/60 323 x 323 SK3243.600 £259.79700-770m3/h 230 50/60 323 x 323 SK3244.600 £334.66900m3/h 200-240 50/60 323 x 323 SK3245.600 £509.83
Air Throughput Rated Operating Voltage Dimensions ListUnimpeded Air Flow V a.c. Hz (mm) Order Code Price
Fan and filter units – EMC
55m3/h 200-240 50/60 148.5 x 148.5 SK3238.500 £107.50105m3/h 200-240 50/60 204 x 204 SK3239.500 £121.91180m3/h 200-240 50/60 255 x 255 SK3240.500 £170.88230m3/h 200-240 50/60 255 x 255 SK3241.500 £178.00550m3/h 200-240 50/60 323 x 323 SK3243.500 £206.13700m3/h 200-240 50/60 323 x 323 SK3244.500 £234.38900m3/h 200-240 50/60 323 x 323 SK3245.500 £320.08
Air Throughput Rated Operating Voltage Dimensions ListUnimpeded Air Flow V a.c. Hz (mm) Order Code Price
Fan and filter units – Electronically commutated (EC)
TopTherm fan and filter units
Technical specificationColour . . . . . . . . . . . . . . . . . . RAL 7035
Includes:= TopTherm fan and filter unit ready for installation
= Filter mat
PLEASE NOTE:For energy-efficient operation of thefan-and-filter units, we recommend usingthe enclosure internal thermostat, thedigital thermostat with display or the speedcontrol (not compatible with 24V d.c. or900m3/h fan and filter units) – on page 199
Outlet filter
Fan and filter units
Enclosures & LED Lightingwww.lcautomation.com
199Check latest prices and stock availability @ www.lcautomation.com
SK3237.100, 110, 124 5 SK3321.700 £9.19
SK3238.100, 110, 124 5 SK3322.700 £10.54
SK3239.100,110, 124 5 SK3171.100 £15.29
SK3240.100,110, 124/SK3241.100,110, 124 5 SK3172.100 £16.63
SK3243.100, 110/SK3244.100, 110/ SK3245.500 5 SK3173.100 £21.05
For Fan and Filter Units . . . Pack Qty Order Code List Price
Replacement filter mats – Standard/EC
160m3/h 230V a.c. 50/60 SK3108.100 £98.60160m3/h 24V d.c. - SK3108.024 £132.70
Air Throughput Rated Operating Voltage ListUnimpeded Air Flow V Hz Order Code Price
Enclosure internal fan
Digital thermostat with display SK3114.200 £80.01
Enclosure internal thermostat SK3110.000 £24.42
Hygrostat SK3118.000 £79.24
Speed control, 1~, AC SK3120.200 £159.42
Speed control, 1~, EC control unit SK3235.440 £97.27
Speed control, 1~, EC, sensor SK3235.450 £57.00
Description Order Code List Price
Accessories
SK3237.xxx 5 SK3237.066 £13.18
SK3238.xxx 5 SK3238.066 £19.32
SK3239.xxx 5 SK3239.066 £33.24
SK3240.xxx/SK3241.xxx 5 SK3240.066 £49.51
SK3243.xxx/SK3244.xxx/SK3245.xxx 5 SK3243.066 £76.57
For Fan and Filter Units – EMC . . . Pack Qty Order Code List Price
Replacement filter mats – EMC
SK3238.xxx 5 SK3238.055 £8.07
SK3239.xxx 5 SK3181.100 £15.29
SK3240.xxx/SK3241.xxx 5 SK3182.100 £16.63
SK3243.xxx/SK3244.xxx/SK3245.xxx 5 SK3183.100 £21.05
For Fan and Filter Units . . . Pack Qty Order Code List Price
Fine filter mats
SK3237.xxx 1 SK3237.080 £59.56
SK3238.xxx 1 SK3238.080 £65.91
SK3239.xxx 1 SK3239.080 £79.54
SK3240.xxx/SK3241.xxx 1 SK3240.080 £108.91
SK3243.xxx/SK3244.xxx 1 SK3243.080 £132.65
SK3245.xxx 1 SK3245.080 £218.66
For Fan and Filter Units . . . Pack Qty Order Code List Price
Hose-proof hoods
SK3237.xxx 2 SK3237.020 £12.49
SK3238.xxx 2 SK3238.020 £14.41
SK3239.xxx 2 SK3239.020 £15.49
SK3240.xxx/SK3241.xxx 2 SK3240.020 £17.83
SK3243.xxx/SK3244.xxx/SK3245.xxx 2 SK3243.020 £20.04
For Fan and Filter Units . . . Pack Qty Order Code List Price
Blanking covers
TopTherm fan and filter unit accessories
Fine filter mats
Hose-proof hoods
Auto range power pack
Blanking covers
For speed control units,see note on page 198)
Enclosures & LED Lighting www.lcautomation.com
Call Blackburn – 01254 685900 or Chippenham – 01249 460099200
Thermoelectric cooling units
Condensate hose, 6 x 1mm, 5m 1 SK3301.606 £18.46
Digital temperature display/thermostat 1 SK3114.200 £80.01
Master/slave adaptor 1 SK3201.070 £38.77
Spare filter mat 5 SK3201.050 £8.30
Pack ListDescription Qty Order Code Price
Accessories
Technical specificationOperating temperatureSK3201.200 . . . . . . . . . -30 to +55ºCSK3201.300 . . . . . . . . . -30 to +60ºC
Air throughput . . . . . . . . . . . . . . 45m3/hConnection . . . . . . . . . . . . Plug-in springColour . . RAL 7024/Anodised aluminiumProtection categoryExternal circuit . . . IP34 to IEC 60 529Internal circuit . . . IP54 to IEC 60 529
Includes:= Thermoelectric cooling unit= Fully wired ready for connection=Mounting accessories= Parameterisation software
100W 100-230 50/60 SK3201.200 £789.20100W 24V d.c. - SK3201.300 £690.70
Useful Cooling Output Rated Operating Voltage ListEnclosure internal/ambient temperature 35ºC V a.c. Hz Order Code Price
www.lcautomation.com
Would you liketo place
your ordersonline?
We can help with that ...
Enclosures & LED Lightingwww.lcautomation.com
201Check latest prices and stock availability @ www.lcautomation.com
0.55kW SK3303.500 £1,168.84
0.85kW SK3361.500 £1,233.94
1.1kW SK3304.500 £1,299.05
1.6kW SK3305.500 £1,889.40
2.2kW SK3328.500 £2,035.87
2.55kW SK3329.500 £2,451.63
Cooling Output ListEnclosure internal/ambient temperature 35ºC Order Code Price
Condensate hose 10 x 1.5mm, 10m 1 SK3301.610 £20.08
Condensate hose 12 x 2mm, 10m 1 SK3301.612 £24.96
Door operated switch with support plate 1 SZ4127.010 £21.98
Filter mats for 0.55/0.85kW units 3 SK3286.300 £17.23
Filter mats for 1.1/1.6/2.2/2.55/3.95kW units 3 SK3286.400 £18.38
Metal filters for 0.55/0.85kW units 1 SK3286.310 £67.25
Metal filters for 1.1/1.6/2.2/2.55/3.95kW units 1 SK3286.410 £65.24
RIDiag II software 1 SK3159.100 £100.45
SK BUS system 1 SK3124.100 £91.71
Pack ListDescription Quantity Order Code Price
Accessories
230V a.c., 50/60Hz
0.85kW SK3361.540 £1,460.33
1.1kW SK3304.540 £1,464.75
1.6kW SK3305.540 £2,013.67
2.2kW SK3328.540 £2,207.49
2.55kW SK3329.540 £2,596.61
3.95kW SK3332.540 £3,110.02
Cooling Output ListEnclosure internal/ambient temperature 35ºC Order Code Price
400V a.c., 50/60Hz
For SK3304.xxx / SK3305.xxx units SK3213.310 £45.15
For SK3328.xxx / SK3329.xxx units SK3213.320 £47.46
For SK3332.xxx units SK3213.330 £56.69
ListDescription Order Code Price
Air diverters
Technical specificationOperating temperature . . . +20 to +55ºCColour . . . . . . . . . . . . . . . . . . . . . RAL 7035Protection categoryExternal circuit . . . . . IP34 to IEC 60 529Internal circuit . . . . . . IP54 to IEC 60 529
Temperature control . e-Comfort (+35ºC)
TopTherm Blue e wall mounted cooling unit
Includes:= TopTherm blue e wallmounted cooling unit
=Nano coated condenser= Integral electric condensateevaporation (not availablefor the 0.55/0.85kW units)
= Assembly parts=Wired ready for connection(plug-in terminal strip)
=Drilling template
Air diverter Metal filters
Door operated switch
Condensate hose
Enclosures & LED Lighting www.lcautomation.com
Call Blackburn – 01254 685900 or Chippenham – 01249 460099202
TopTherm Blue e roof mounted cooling unit
Technical specificationPermissible operating pressurep. max . . . . . . . . . . . . . . . . . . . . 28bar
Duty cycle . . . . . . . . . . . . . . . . . . 100%Connection . . . . . . . Plug-in terminal stripColour . . . . . . . . . . . . . . . . . . RAL 7035Protection categoryExternal circuit . . . IP34 to IEC 60 529Internal circuit . . . IP54 to IEC 60 529
Material . . . . . . . . . . . . . . . . . . . . . SteelOperating temperature . . +20 to +55ºC
Includes:= TopTherm blue e roof mountedcooling unit
=Nano coated condenser= Integral electric condensateevaporation
= Fully wired ready forconnection
=Drilling template= Assembly parts
0.55kW SK3382.500 £1,220.64
0.77kW SK3359.500 £1,353.79
1.0kW SK3383.500 £1,483.99
1.5kW SK3384.500 £1,609.74
2.0kW SK3385.500 £2,081.74
Cooling Output ListEnclosure internal/ambient temperature 35ºC Order Code Price
230V a.c., 50/60Hz
0.77kW SK3359.540 £1,529.85
1.0kW SK3383.540 £1,642.30
1.5kW SK3384.540 £1,772.49
2.0kW SK3385.540 £2,253.55
3.0kW SK3386.540 £2,442.74
3.8kW SK3387.540 £2,675.02
Cooling Output ListEnclosure internal/ambient temperature 35ºC Order Code Price
400V a.c., 50/60Hz
Condensate hose 12 x 2mm, 10m 1 SK3301.612 £24.96
Door operated switch with support plate 1 SZ4127.010 £21.98
Filter mats for 0.55-2.0kW units 3 SK3286.500 £19.46
Filter mats for 3.0/3.8kW units 3 SK3286.600 £19.04
Metal filters for 0.55-2.0kW units 1 SK3286.510 £79.31
Metal filters for 3.0/3.8kW units 1 SK3286.610 £102.24
Quick change frame for 0.55/0.75kW units 1 SK3286.700 £155.15
Quick change frame for 1.0/1.5/2.0kW units 1 SK3286.800 £166.01
Quick change frame for 3.0/3.8kW units 1 SK3286.900 £181.37
SK BUS system 1 SK3124.100 £91.71
RiDiag II software 1 SK3159.100 £100.45
Pack ListDescription Quantity Order Code Price
Accessories
Air duct adapter for SK3382.xxx/SK3359.xxx units 1 SK3286.840 £26.44
Air duct system for 0.55-2.0kW units 1 SK3286.870 £86.40
Air duct system for 3.0-3.8kW units 1 SK3286.970 £86.40
Deflector, 90º 1 SK3286.990 £40.35
Shallow air duct system 1 SK3286.850 £77.56
Shallow duct extension 1 SK3286.860 £49.26
Stoppers for 0.55/0.75kW units 2 SK3286.780 £11.52
Stoppers for 1.0/1.5/2.0kW units 2 SK3286.880 £13.75
Stoppers for 3.0/3.8kW units 2 SK3286.980 £16.07
Pack ListDescription Quantity Order Code Price
Air routing
Air duct system
Stoppers
Enclosures & LED Lightingwww.lcautomation.com
203Check latest prices and stock availability @ www.lcautomation.com
1.6kW SK3185.830 £2,135.74
2.0kW SK3186.930 £2,200.84
2.6kW SK3187.930 £2,650.30
Cooling Output ListEnclosure internal/ambient temperature 35ºC Order Code Price
110-230/380-480V a.c., 50/60Hz
4.2kW SK3188.940 £3,199.90
5.8kW SK3189.940 £4,000.58
Cooling Output ListEnclosure internal/ambient temperature 35ºC Order Code Price
380-480V a.c., 50/60Hz
Technical specificationTotal cooling output . . . . . . 1.6 to 5.8kW
(depending on model)Operating temperature . . . . -20 to +60ºCInternal cabinet temperature range . . . . . . -20 to +50ºC
Material . . . . . . . . . . . . . . . . . . . . . . . . SteelColour . . . . . . . . . . . . . . . . . . . . . RAL 7035Protection . . . . . . . . . . . . . . . . . . . . IP55
TopTherm Blue e+ wall mounted cooling units
Features:= Energy savings of up to 75%=Multi-voltage support= Active cooling unit with variable speed= Easy to operate and setup viaintelligent text message display
= Remote access via NFC interface= Constant temperature inside enclosure with three control modes
= Remote monitoring via Ethernet port
Filter mats 3 SK3285.900 £16.72
Metal filter 1 SK3285.910 £77.63
Door operated switch 1 SZ4127.010 £21.98
Pack ListDescription Quantity Order Code Price
Accessories
The ultimate in efficiency
The new range of Blue e+ coolingunits offer exceptional energyefficiency by using hybridtechnology combined with variablespeed cooling, with an integral heatpipe for passive cooling and heatdissipation. This combination of moderntechnologies sets new standards forcontrol cabinet cooling and energyefficiency. The new touch display andintelligent interfaces make it easy forusers to set up the unit, monitorperformance and alert engineers ofpotential problems. The USB interface and Ethernet portsallow remote monitoring oralternatively this can done via amobile app.
Enclosures & LED Lighting www.lcautomation.com
Call Blackburn – 01254 685900 or Chippenham – 01249 460099204
These air/water heat exchangersare used for hygienically sensitiveproduction zones in the food andconsumables industry. The cleaning-friendly design reducesthe risk of contamination and ensuresfood safety.The main benefits are a roof tilt of30º which prevents objects frombeing deposited on it, and allowsliquids to run off quickly. Also theall-round external replaceable siliconeseal prevents the accumulation of dirtbetween the enclosure and theair/water heat exchanger.
Air/water heat exchangers
Includes:= Fully wired ready for connection=Drilling template= Sealing and assembly parts
Technical specificationMaterialEnclosure . . . . . . . . . . . . Stainless steel
1.4301 (AISI 304)Surface finishEnclosure: . . . . . . Brushed, grain 400,
peak-to-valley height <0.8mmProtection category . IP56/59 to IEC60529,
complies with NEMA 4XAir throughput (unimpeded air flow)Internal circuit at 50HzSK3214.700 . . . . . . . . . . . . . .280m³/hSK3215.700 . . . . . . . . . . . . . .680m³/hInternal circuit at 60HzSK3214.700 . . . . . . . . . . . . . .310m³/hSK3215.700 . . . . . . . . . . . . . .735m³/h
Rated operating voltage . . . . . 230V, 1~,50/60Hz
DimensionsSK3214.700 . . h526 x w220 x d100mmSK3215.700 . . h982 x w215 x d100mmTemperature control . . . . . . Thermostat
controlled magnetic valveTemperature rangeOperation (environment) . 1 to +70°CSetting range . . . . . . . . . . 20 to +60°CWater inlet . . . . . . . . . . . . 1 to +30°C
Duty cycle . . . . . . . . . . . . . . . . . . 100 %Power consumption PelAt 50HzSK3214.700 . . . . . . . . . . . . . . . . .33WSK3215.700 . . . . . . . . . . . . . . . . .77WAt 60HzSK3214.700 . . . . . . . . . . . . . . . . .34WSK3215.700 . . . . . . . . . . . . . . . .104W
Rated current (max.)At 50HzSK3214.700 . . . . . . . . . . . . . . . .0.16ASK3215.700 . . . . . . . . . . . . . . . .0.38AAt 60HzSK3214.700 . . . . . . . . . . . . . . . .0.14ASK3215.700 . . . . . . . . . . . . . . . .0.47A
Miniature circuit-breaker/fuseSK3214.700 . . . . . . . . . . . . . . . . . .2ASK3215.700 . . . . . . . . . . . . . . . . . .4A
Permissible operatingpressure (p. max.) . . . . . . . 1 to 10bar
Temperature monitoring . . . . . . . . . . . . .Internal thermostat with change-over
contact, switching load 16A, setting range20 to +60°C (factory setting +35°C)
Water connections . .G3⁄8" external threadWeightSK3214.700 . . . . . . . . . . . . . . . . . .6kgSK3215.700 . . . . . . . . . . . . . . . . .14kg
Note: To achieve a protection category ofIP 66/69 to IEC 60 529, the ingress ofleakage air through the condensatedischarge opening must be completelyprevented.
NEW
0.6kW 0.65kW SK3214.700 £778.38
1kW 1.2kW SK3215.700 £1,081.01
Cooling Output List200l/h kW 400l/h kW Order Code Price
Enclosures & LED Lightingwww.lcautomation.com
205Check latest prices and stock availability @ www.lcautomation.com
400 262 — 100-240Va.c. — — — — SZ2500.100 £47.07
600 337 — 100-240Va.c. — — — — SZ2500.110 £51.02
900 437 — 24V d.c. — l — l SZ2500.220 £94.01
900 437 — 100-240Va.c. — l — l SZ2500.200 £94.01
900 437 — 100-240Va.c. l l — l SZ2500.210 £97.35
1200 437 l 100-240Va.c. — l l l SZ2500.300 £152.24
1200 437 l 100-240Va.c. l l l l SZ2500.310 £157.33
Output Length Motion Rated Operating 90º Rotating Adjustable Adjustable List(lumens) (mm) Sensor Voltage Socket Connector Light Direction Light Distribution Order Code Price
Technical specificationLight colour . . . . . . . . 4000K (neutral white)Enclosure colour . . . . . . . . . . . . . RAL 7016Material . . . . . . . . . . . . . . . Plastic/aluminium
LED system lightsIncludes:= Assembly screws
NEW
These LED system lights areespecially for enclosures, they offeroptimum illumination of the entireenclosure for even more light intoevery corner.Suitable for use with AE, SE8 and TS8enclosures.
2-pole, 24V d.c. Black 3000 5 SZ2500.410 £32.80
2-pole, 100-240Va.c. Orange 3000 5 SZ2500.420 £24.21
3-pole, 100-240Va.c. Orange 3000 5 SZ2500.400 £27.46
Length Pack ListDescription Colour (mm) Quantity Order Code Price
Cables - Infeed
2-pole, 24V d.c. Black 1000 5 SZ2500.440 £36.16
2-pole, 100-240Va.c. Orange 1000 5 SZ2500.450 £27.63
3-pole, 100-240Va.c. Orange 1000 5 SZ2500.430 £34.14
Length Pack ListDescription Colour (mm) Quantity Order Code Price
Cables - Through-wiring
Universal bracket 6 SZ2373.000 £33.72
Mounting kit magnet 4 SZ2500.490 £8.27
Door operated switch 1 SZ2500.460 £25.98
Pack ListDescription Quantity Order Code Price
Accessories
Enclosures & LED Lighting www.lcautomation.com
Call Blackburn – 01254 685900 or Chippenham – 01249 460099206
WLS28-2 – 28mm LED strip lights
These LED strip lights have sturdyaluminium housings, shatterproofwindows and impressiveenvironmental ratings, makingthem an ideal general purpose LEDlight for machine, enclosure orother industrial lightingapplications.
Features= Low profile space saving design= Rugged, water resistant IP69K option= Automatic temperature protection=Optional high/low/off switch
Technical specification Supply voltage . . . . . . . . . .12 to 30V d.c.Supply protection circuitry . . . Protected
against reverse polarityand transient voltages
Colour temperature . . . . . . . Cool white 6000-7100K
LED lifetime . . . . . . . . . When operating within specifications, output will decrease
less than 30% after 50,000 hours
Construction . . . . . . Anodized aluminiumhousing; painted zinc end caps; acrylicwindow; zinc plated steel brackets
Mounting . . . . . . . . . . 2 x swivel brackets(SMBWLS28RA) included
and 4 x screwsConnection . . . . . . . . Integral 4-pin M12
quick disconnect fitting(4-pin connecting cordset required)
Unswitched
285mm
570mm
850mm
1130mm
IlluminatedLength
Accessories
Magnetic mount SMBWLSMAG £9.86
Inline switch WLS28PBQ £43.34
Motion switch WLS28-2MQ £38.34
4-pin M12 euro style cordset, IP67/IP69K, 5m MQDC-415 £32.23
Power supply (d.c. versions only) PSD-24-4 £104.83
ListDescription Order Code Price
Switched
285mm WLS28-2XW285XPBQ £116.69
570mm WLS28-2XW570XPBQ £161.14
850mm WLS28-2XW850XPBQ £238.93
1130mm WLS28-2XW1130XPBQ £300.06
ListIlluminated Length Order Code Price
WLS28-2XW285SQ £180.21
WLS28-2XW570SQ £216.71
WLS28-2XW850SQ £238.93
WLS28-2XW1130SQ £323.74
List Order Code Price
Sealed* – IP67/69K
WLS28-2XW285XQ £140.16
WLS28-2XW570XQ £200.04
WLS28-2XW850XQ £216.71
WLS28-2XW1130XQ £306.72
List Order Code Price
Unsealed – IP50
Magnetic mount
* Sealed lights are not suitable for use with ON/OFF or motion switchesInline switch
Enclosures & LED Lightingwww.lcautomation.com
207Check latest prices and stock availability @ www.lcautomation.com
WLB32 – 32mm LED work lights
These LED work lights haveultra-bright LEDs that feature an even light output for a no glare glow.Suitable for a variety of environmentsand applications including workstations, machine lighting, controlcabinets and manufacturing lines.
Features=Metal housing, shatterproof window=Daisy chain power to multiple lights=High/low/off switch=High energy efficiency
Technical specification Supply voltage . . . . . . . . . 12 to 30V d.c.
or 90 to 264V a.c.Supply protection circuitry . . . Protected
against reverse polarityand transient voltages
Colour temperature . . . . . Daylight white 5000K
LED lifetime . . . . . . . . . .When operating within specifications output will decrease less than 30% after
50,000 hoursConstruction . . . . . . Anodized aluminium
housing; polycarbonate window and end caps; stainless steel
mounting bracketsMounting . . . . . . . . . . . . . . . . Snap clips;
optional magnetic mount availableConnection . . . . . . . . . . . . Integral quick
disconnecting fitting(connecting cordset required)
Environmental rating . . . . . . . . IEC IP50
Accessories
Magnetic mount LMBWLB32MAG £13.34
4-pin M12 Euro style cordset IP67/IP69K for d.c. models, 5m MQDC-415 £32.23
Custom disconnect cable with UK plug for a.c. models, 1.8m LQMAC-306G £16.67
Double-ended cascading cordset for a.c. models, 0.3m LQMAEC-301SS £10.60
Double-ended cascading cordset for a.c. models, 0.9m LQMAEC-303SS £9.81
Double-ended cascading cordset IP67 for d.c. models, 0.3m MQDEC-401SS £43.34
Double-ended cascading cordset IP67 for d.c. models, 0.9m MQDEC-403SS £46.68
Power supply (d.c. versions only) PSD-24-4 £104.83
ListDescription Order Code Price
285mm
570mm
850mm
1130mm
IlluminatedLength
WLB32C285PBQ £65.96
WLB32C570PBQ £105.58
WLB32C850PBQ £143.36
WLB32C1130PBQ £194.48
List Order Code Price
12 to 30 V d.c.
WLB32ZC285PBQM £71.12
WLB32ZC570PBQM £104.46
WLB32ZC850PBQM £143.36
WLB32ZC1130PBQM £176.68
List Order Code Price
90 to 264 V a.c.
Have you had a look at our e-commerce website?
Log-in today for latest pricesand stock availability
www.lcautomation.com