Upload
drago
View
40
Download
0
Embed Size (px)
DESCRIPTION
Energy Efficiency as part of the integrated approach. Gisela Holzgraefe. Content of this presentation. background objectives of the IMPEL project 2011 / 2012 methodology and work done results recommendations. 13-9-2014. 2. Background – EU policy. - PowerPoint PPT Presentation
Citation preview
Gisela Holzgraefe
Energy Efficiency as part of the integrated approach
2
Content of this presentation
background objectives of the IMPEL project 2011 /
2012 methodology and work done results recommendations
21-04-23
Background – EU policy
EU policy regarding energy efficiency:reduce greenhouse gas (GHG) emissions by 20% of 1990 level by 2020
Member States agreed to reach the objective by
- Reducing energy consumption by 20 %
- Increasing use of renewable energy sources
by 20%;
- Increasing the share of biofuel in transport sector by 20%.
21-04-23 3
Background – EU legislation
EU legislation related to industrial installations addresses energy efficiency
IPPC Directive (96/61/EC) Directive 2010/75/EU on industrial emissions:
- Member States shall take measures that energy is used efficiently (Art. 11 f) permit applications include a description used in or generated by the installation (Art. 12 b)
BAT conclusions shall be the reference for setting the permit conditions (Art 14 (3)). EE = one criterion for determining BAT
21-04-23 4
Background – IMPEL activities
IMPEL project „Energy Efficiency in Environmental Permits“ 2002/2003
Development of horizontal BREF document „Energy Efficiency“
IMPEL project „Energy Efficiency in Permitting and Inspection“ 2010 main item: evaluation of the current situation;
result: no improvements so far
21-04-23 5
Background – IMPEL activities
Proposal of a follow-up project :
Development of a template for documents and data required regarding energy efficiency in the permit application
Steps:
- development of the template in 2011 and- practical test 2012
21-04-23 6
7
objectives of the IMPEL project 2011 / 2012
objectives:Identify how requirements of the EE BREF and EE related chapters of BREFs need to be integrated in permit activitiesExplore what kind of information is needed in permit applicationsDevelop a template for documents and data required regarding energy efficiency in the permit applicationCarry out practical tests with the template in permit procedures
21-04-23
8
Methodology and work done in 2011 (1)
Work with an expert team (project team plus experts)
Discussion of EE items in the IPPC-Directive / IED
Presentations on EE items in LCP sector, iron and steel sector, manufacture of glass, cement industry and dairy sector and discussions with experts
Development of a draft general application form
Conclusion: general form applicable, but sector specific supplements necessary
21-04-23
9
Methodology and work done in 2011 (2)
Development of draft supplements for: - the iron and steel sector*- the manufacture of glass*- cement, lime and magnesium oxide production*- food, drink and milk sector- intensive rearing of poultry and pigs
Basis:- BREF documents- BAT conclusions*- input of experts
21-04-23
10
Methodology and work done in 2012 (1)
Work with a working group (project team and permit writers)
Improvement of draft application form and sector specific supplements
Test of the draft application form and the annexes in permit procedurestwo alternatives starting permit procedures or finalised permit procedures
translation of general application form, sector specific annex for glass industry and intensive rearing of poultry and pigs into German
21-04-23
11
Methodology and work done in 2012 (2)
draft application form and sector specific supplements were tested in the following sectors: steel sector by ARPA Lombardia (IT) glass industry (DE) intensive rearing of pigs (DE) two small food processing companies
(DE) sloughter house (DK) large combustion plant based on
biomass (DK)
21-04-23
12
Results (1)
evaluation of the work with the documents and the experience with them by using a questionnaire
Main results:clear definition of system boundaries – key challengeuse of benchmarks – good approach
collection of EE data from previous years would allow for comparisons and identification of improvements
21-04-23
13
Results (2)
participating operators partly declared their data as confidential
existing installations: sometimes difficult for the operators to provide the necessary data(does not apply for companies with ISO 50 001 system)
new installations: operators have the data and are able to fill in the application forms
participants in the test said that sector specific supplemetns were useful
21-04-23
14
Results (3)
motivation of operators was higher when they were directly contacted by representatives from the authority and advice was offered
representatives of an agricultural organisation said that the information required is available for new installations and made proposals for the improvement of the annex
motivation of operators does not necessarily correspond with the size of the installation – two small food processing companies were highly motivated
21-04-23
15
Results – consequences for authorities
authorities: need for specialisation / training of staff members for dealing with EE
the general application form and the supplements were considered as valuable – provide basic knowledge
application should be well prepared and carried out in 3 steps- kickoff-meeting with introduction to the tools- completion of the forms by the operator- meeting for verification and discussion of the results
21-04-23
16
Results – consequences for authorities
permit conditions related to EEsome authorities have developed a set of permit conditions for their installations
permit conditions become part of the inspections
exchange of information about dealing with EE in permit procedures is necessary
21-04-23
Further developments
test of the use of the project products for the renewal of permits (Arpa Lombardia)
test of the draft application form and the annexes in permit procedures (SH)
discussion of indicators / benchmarking with permit writers
21-04-23 17
Applicability of BAT conclusions
Focus on production of cement, iron and steel and manufacture of glass
Important that the item is part of the conclusions
EE chapters but give important input and orientation
For details permit writers have to use the BREF documents
21-04-23 18
19
Recommendations for future work
Workshop on assessment of the application documents regarding EE
Development of a presentation for training on dealing with EE in permit procedures
Integrating the discussion on energy efficiency in other sector specific IMPEL-projects
Developing an online tool for energy data submission (e.g. electronic application form for EE)
Integrating EE in inspection work
21-04-23
Thank you for your attention !
21-04-23 20