Enerpac Hydraulic Presses

148

JFB

DC

GA J

E

H

K

K

C

D

G

B

F

J

EH

A

148 www.enerpac.com

Enerpac Hydraulic Presses are available

in a wide variety of standard capacities and

configurations, or you can “build your own”

with the easy-to-use matrix.

The press frames are a welded construction

for maximum strength and durability, and when

combined with the power of high-pressure

hydraulics, will provide years of safe and

dependable service in your workshop.

Enerpac press capacities range from 10-ton to

200-ton and are available in Bench, C-Frame,

Arbor, H-Frame and Roll-Frame models.

Enerpac Hydraulic Presses

These press features increase productivity and broaden the range of applications:

Standard on many Enerpac IP Presses, the exclusive Hydra-Lift™ offers effortless adjustment to the press daylight by use of a hydraulic lift.

Easy horizontal cylinder position is achieved with the unique “roller-head” cylinder mounting block, standard on most Enerpac IP Presses.

Optional “V-blocks” for positioning of complex parts are designed with high-strength steel for long life.

149

J

F

B

D

CG

A

J

E

H

JFB

DC

GA J

E

H

JFB

DC

GA J

E

H

▶

▶

▶

▶

▶

▶

▶

▶

▶

150

154

156

156

156

158

159

160

161

10-200

50-200

5-20

10-30

10

10-200

10-200

5

1-100

IP

IPR

A

A

AIP

TM

LH

IP

www.enerpac.com

Press Section Overview

H-Frame Presses

Roll Frame Presses

C-Clamp Presses

Arbor Presses

Bench Frame Press

Press AccessoriesPress Speed Chart

Custom Built Presses

Tension Meter

Load Cells

Custom Hydraulic Presses

Capacity(tons)

Press Type and Functions Series Page

▼

150 www.enerpac.com

158

158

158

153

158

IP-Series, H-Frame Presses

• Quality welded frame for maximum strength and long life• Exclusive “Hydra-Lift™” bed for effortless adjustment

of the vertical daylight (10-ton models are manual)• Roller head design is standard to allow movement and

locking of the cylinder from side to side (10-ton, 25-ton and 30-ton are manual)

• All models in the Quick Selection Chart have been matched to a pump, cylinder, hoses and gauge, offering the complete package

Press shown: IPE-5060

Setting the Industry Standard

Cylinder Mounting Block

Allows cylinder mounting into a press frame, while also allowing side to side adjustment of cylinder position.

Page:

Hydra-Lift™

Allows easy, effortless daylight adjustment. Standard on most H-Frame presses.

Page:

Pump Mounting Bracket

Heavy-duty steel brackets allow mounting of one of the Enerpac Power Sources to power your press.

Page:

Gauge Included

All standard press models include a gauge and gauge adaptor, matching the press capacity.

Page:

◀ An Enerpac H-Frame press quickly removes the shaft from this assembly.

V-Blocks

These optional V-Blocks are designed for easy fixturing of round stock and other non-uniform materials. Featuring precise fit into the press bolster.

Page:

151

158

H-Frame Presses

Man. Man.Elec. Air Elec.

Stroke

(in)

Speed

(sec/in)*

Power Source Press ModelNumber

Maximum Vertical Daylight

(in)

Maximum Bed

Width

(in)

PressCapacity

(tons)

Rapid Advance

PressingType Valve

Cylinder

IPSeries

Capacity:

10-200 tonsMaximum Daylight and Width:

54.50 & 48.00 inchesMaximum Operating Pressure:

10,000 psi

▼ QUICK SELECTION CHART For more technical information see next page.

* {--} Speed in strokes per inch plunger travel

Cylinder Types

= Single-acting,

Spring Return

= Double-acting, Hydraulic Return

Ordering Variations

Any variations to a listed part number must be ordered as two separate items. For example,

if you need a different voltage electric pump, please order from the modular matrix on page 159 and the electric pump from the modular matrix on page 99 (electric) or page 111 (air).

Any questions should be directed to our Technical Service Department.

Page:

0.902.20{4}{2}

2.201.50.70

5.20{5}.60.90{7}

1.021.00{2}

{11}2.901.001.00{2}

1.901.90{3}

1.90{3}

2.203.10

6.7013.40{15}{15}

13.4015.407.70

30.90{34}

43.009.80{34}

11.0474.00{38}{73}

28.9022.2011.00{38}

41.2020.60{70}

20.60{70}

15.4022.10

•••

••••

•••••

•••

40.0040.0040.0040.0040.0054.5054.5054.5054.5054.5054.5054.5048.5648.5648.5648.5648.5648.5648.5648.5642.5042.5042.5042.5042.5048.5048.50

IPE-1215IPA-1220IPH-1240IPH-1234IPA-1244IPE-2505IPE-2510IPA-2520IPH-2531IPA-3071IPE-3060IPH-3080IPE-5010IPA-5021IPH-5030IPH-5031IPE-5005IPA-5073IPE-5060IPH-5080IPA-10023IPE-10010IPH-10030IPE-10060IPH-10080IPE-15065IPE-20065

18.6318.6318.6318.6318.6329.0029.0029.0029.0029.0029.0029.0028.7528.7528.7528.7528.7528.7528.7528.7535.0035.0035.0035.0035.0048.0048.00

10

25

30

50

100

150200

••

•••

•••

••••

•

••

•

•

•

•

•

•

••

••

•

•

••

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

••

10101010106

141414141414136666

131313101010136

1313

••••••

•••

•

•••••

••

•

•

152 www.enerpac.com

666

32326666

32323266666

323232666

32323232

8410870721088296108721059672961057272821109672110967296729696

IP-Series, H-Frame Presses

A

(min)

A

(max)

B C D E

Press ModelNumber

PressCapacity

(tons)

H-Frame Press Dimensions (in)PumpModel

Number

◀ For full features see page 137.

Page:Page:

CylinderModel

Number

▼ The moveable “cylinder mounting block” allows the user to quickly adapt the press to a specific job.


10

25

30

50

100

150200

PEM-1201BXA-12P-392P-84

XA-12VPUJ-1200B

ZE3310SB-NXA-12P-80

PAM-1042ZE3410SB-N

P-84ZE4320SB-N

PAM-1022P-462P-80

PUJ-1200BZA4408MX

ZE4420SB-NP-464

ZA4208MXZE4320SB-N

P-462ZE4420SB-N

P-464ZE5420SG-NZE5420SG-N

RC-1010RC-1010RC-1010RR-1010RR-1010RC-256

RC-2514RC-2514RC-2514RR-3014RR-3014RR-3014RC-5013RC-506RC-506RC-506RC-506RR-5013RR-5013RR-5013

RC-10010RC-10010RC-10010RR-10013RR-1006

RR-15013RR-20013

40.0040.0040.0040.0040.0054.5054.50 54.50 54.50 54.50 54.50 54.50 48.5648.56 48.56 48.56 48.56 48.56 48.56 48.56 42.5042.50 42.50 42.50 42.50 48.5048.50

2.442.44 2.44 2.44 2.44 7.007.007.007.007.007.007.007.067.067.067.067.067.067.067.067.007.007.007.007.00

12.5012.50

––––––––––––

18.7618.7618.7618.7618.7618.7618.7618.7620.0020.0020.0020.0020.0028.0028.00

46.7546.7546.7546.7546.7557.0057.0057.0057.00 57.0057.0057.0054.0054.0054.0054.0054.0054.0054.0054.0051.0051.0051.0051.0051.0054.5054.50

5.005.005.005.005.00

11.8811.8811.8811.8811.8811.8811.8810.3810.3810.3810.3810.3810.3810.3810.3811.6911.6911.6911.6911.6910.0010.00

18.6318.6318.6318.6318.6329.0029.0029.0029.0029.0029.0029.0028.7528.7528.7528.7528.7528.7528.7528.7535.0035.0035.0035.0035.0048.0048.00

153

L

KG

J F

E

M

C

H

D

B

N

131

158

H-Frame Presses

Weight

(lbs)

F G H J K L M N

Press ModelNumber

H-Frame Press Dimensions (in)

IP Series

Capacity:



10,000 psi

H-Frame Press Gauges

All standard press models include a gauge and gauge adaptor, matching the press capacity:

For more information on gauges, please refer to the System Components section.

Page:

Press Capacity

(tons)

Adaptor Model Number

Gauge Model Number

Hydra-Lift™

Ordering Variations

Any variations to a listed part number must be ordered as two separate items. For

example, if you need a different voltage electric pump, please order from the modular matrix on page 159 and the electric pump from the modular matrix on page 99 (electric) or page 111 (air).


Page:

A (m

ax.)

A (min.)


24.8824.8824.8824.8824.8840.5040.5040.5040.5040.5040.5040.5042.7542.7542.7542.7542.7542.7542.7542.7551.0051.0051.0051.0051.0067.1767.17

–––––

4.004.004.004.004.004.004.005.005.005.005.005.005.005.005.006.756.756.756.756.759.129.12

–––––

13.2513.2513.2513.2513.2513.2513.258.758.758.758.758.758.758.758.758.758.758.758.758.753.093.09

29.7529.7529.7529.7529.7530.0030.0030.0030.0030.0030.0030.0036.0036.0036.0036.0036.0036.0036.0036.0036.0036.0036.0036.0036.0044.0044.00

4.254.254.254.254.255.255.255.255.255.255.255.257.257.257.257.257.257.257.257.258.758.758.758.758.7513.1213.12

7.447.447.447.447.4410.6910.6910.6910.6910.6910.6910.6914.3814.3814.3814.3814.3814.3814.3814.3817.2517.2517.2517.2517.2521.8521.85

35.0035.0035.0035.0035.0026.5026.5026.5026.5026.5026.5026.5030.7530.7530.7530.7530.7530.7530.7530.7533.1333.1333.1333.1333.1347.7547.75

52.0052.0052.0052.0052.0076.0076.0076.0076.0076.0076.0076.0076.0076.0076.0076.0076.0076.0076.0076.0076.0076.0076.0076.0076.0090.0090.00

298160158189163605697610620684722664

1,040968968926930

1,0571,0511,0031,6501,7221,6561,7431,6653,9063,906

GF-10PGF-20PGF-835PGF-50PGF-871PGF-200PGF-200P

10253050

100150200

GA-2GA-2GA-3GA-2GA-3GA-3GA-3

▼

154 www.enerpac.com

33 33 33

9696 96

158

158

158

158

• Qualityweldedframeformaximumstrengthandlonglife• Framerollseasilyonfoursteelrollerbearings• Hydraulicclampcylinderslockframeintoposition• Exclusive“Hydra-Lift™”bolsterforeffortlessadjustment

oftheverticaldaylight• Standardrollerheaddesignallowsmovementofthe

cylinderfromsidetoside• AllmodelsintheQuickSelectionCharthavebeen

matchedtoapump,cylinder,hosesandgauge, offeringthecompletepackage

• RollFramedesignfeaturesastationarybedwith theabilitytosupportheavyloads

Shown: IPR-10075

IPR-Series,RollFramePresses

Cylinder,Double-ActingHydraulicReturn

PressModelNumber

Vertical Daylight

A (in)

HorizontalDaylight

E(in)

PressCapacity

(tons)

ModelNumber

Stroke

(in)

RapidAdvance

Pressing

Speed

(sec/in)

PumpModel Number

TheOneandOnly

Page: Page:

CylinderMountingBlock

Allows cylinder mounting into a press frame, while also allowing side to side adjustment of cylinder position.

Page:

PumpMountingBracket

Heavy duty steel brackets to allow conversion to one of the Enerpac Power Sources to power your press.

Page:

Hydra-Lift™

Allows easy, effortless daylight adjustment.

Page:

OptionalV-Blocks

These V-Blocks, 200 ton only, are designed for easy fixturing of round stock and other non-uniform

materials. Featuring precise fit into the press bolster.

Page:

minimum maximum

37.1241.2851.00

6.006.2811.00

IPR-5075IPR-10075IPR-20075

28.7535.0048.00

50100200

RR-5013RR-10013RR-20013

ZE4420SB-NZE5420SG-NZE5420SG-N

13.1313.1313.00

•••

1.01.53.1

11.110.322.1

155

AB

CM

K

N

GJ H

L

E

F

D

131

158

Roll Frame Presses

Weight

(lbs)B C D F G H J K L M N

Press ModelNumber

Roll Frame Press Dimensions (in)

IPR Series

Capacity:



10,000 psi

Ordering Variations

Any variations to a listed part number must be ordered as two separate items. For

example, if you need a different voltage electric pump, please order from the modular matrix on page 159 and the electric pump from the modular matrix on page 99 (electric) or page 111 (air).


Roll Frame Press Gauges

All standard press models include a gauge and gauge adaptor, matching the press capacity:

For more information on gauges, please refer to the System Components section. Page:

Press Capacity

(tons)

Adaptor Model Number

Gauge Model Number

Page:

▼ An IPR-20075 Roll Frame Press is used to remove a large shaft from this pillow-block assembly. The Roll Frame design allows this heavy part to be safely loaded with an overhead crane.

IPR-5075IPR-10075IPR-20075

20.7126.5038.75

38.2538.0036.75

10.388.7510.00

36.7545.0064.00

5.005.759.12

55.9263.1984.63

8.008.008.00

10.6310.6315.00

30.0032.0036.00

112.96118.94125.96

1,9613,8497,869

64.0066.0086.50

GF-50PGF-871PGF-200P

GA-2GA-3GA-3

50100200

▼

156 www.enerpac.com

C-Clamp, Arbor and Bench Frame Presses

C-Clamp Press• 5, 10 and 20 ton capacity • Operational in all positions

Arbor Press• Foot mounting holes for horizontal or vertical positioning• Machined work surfaces for easier fixturing• Slotted back to simplify loading and unloading of

longer parts

Bench Frame Press • Cylinder mounting adaptor allows lateral

positioning along rails• Mounting holes for easy mounting to fixed surface

Shown from left to right: A-220, A-330 and A-258

Push Pin A-183

For applications requiring precision pressing, such as shaft removal and insertion. This attachment fits 10 ton

cylinders and requires the use of a threaded adaptor saddle (A-13).

Smooth Saddle A-185

For pressing applications of delicate parts, such as aluminum castings, this saddle decreases surface

marks during the pressing application. Requires 10-ton cylinder and threaded adaptor saddle (A-13).

The Standard In Workshop Tools

* Requires RC cylinder listed, see page 7 for specifications.** Requires RC-25 ton cylinder, limited to 20 tons.*** Complete set includes cylinder and pump.

Arbor

C-Clamp

Bench

Press Type

Press Model Number

Maximum Vertical Daylight

(in)

Maximum Bed

Width

(in)

Cylinder Series

Number*

Weight

(lbs)

Press Capacity

(tons)

▼ A-310 Abor Press

8.9410.256.509.00

11.8815.3815.3815.38

A-310*A-330*A-205*A-210*A-220**A-258*IPA-1022***IPH-1040***

10305

1020101010

RC-10-xRC-30-xRC-5-x

RC-10-x**–

RC-1010RC-1010

62220143783

103140135

5.317.002.003.253.75

15.0015.00 15.00

157

K

K

C

D

O

G

B

L M N

F

J

E H

A

J

FB

D

C

G

A

K

L

M

E

H

▼

H

M

E

N

OA

FD

LJ

K

C

B

G

6

69

C-Clamp, Arbor and Bench Frame Presses

Bench Press Frame A-258

C-Clamp Press A-205, A-210, A-220

Arbor Press A-310, A-330

AIPSeries

Capacity:

5-30 tonMaximum Daylight and Width:

15.38 and 15.00 inchesMounting Capabilities:

Fixed or PortableMaximum Operating Pressure:

10,000 psi

A perfect example of the force and versatility of the Enerpac A-220 C-Clamp press.

Press Adaptor

A-110 V-Block(optional)

For high-cycle production applications, C-Clamp and Arbor presses should be limited in their capacity.

Consult Enerpac Technical Services for specific application details.

Press Model Number

Press Dimensions (in)

A B C D E F G H J K L M N O

Top View Working Surface

Hydraulic Cylinders

Cylinders for C-Clamps and Arbor Presses must be ordered separately.

Hydraulic Pumps

Pumps for C-Clamps and Arbor Presses must be ordered separately.

Page:

Page:

16.3121.9411.4416.0021.2525.63 25.63 25.63

11.0613.888.0011.1313.6318.75 18.7518.75

8.9410.256.509.0011.8816.50 16.5016.50

6.006.003.756.006.0016.00 16.0016.00

5.317.002.883.254.765.75 5.755.75

2.502.501.021.021.021.00 1.001.00

4.815.502.002.252.754.50 4.504.50

.751.002.502.502.751.25 1.251.25

3.816.501.061.691.882.75 2.752.75

6.888.004.757.638.381.88 1.881.88

2.562.631.001.131.135.30 5.305.30

2.133.88

–––

2.20 2.202.20

8.6310.88

–––

2.63 2.632.63

2¼-14 un

35•16-12 un

1½-16 un

2¼-14 un

35•16-12 un

3.253.253.25

A-310A-330A-205A-210A-220A-258IPA-1022IPH-1040

.34(8x)

11.44 (A-310)14.75 (A-330)

.50

1/2"-13UNC

1.63 (A-330)1.38 (A-310)

3.38 (A-330)4.00 (A-310) 2.32

13.92

158 www.enerpac.com

Press Accessories and Press Speed Chart

Cylinder Capacity

(tons)

Cylinder Load

Single Speed

P-391P-392 P-80

P-84P-462P-464

ZE3Series

ZE4Series

ZE5Series

XA PA-133 PAM 10Series

½ hpPort.

½ hpSubm.

Hand Operated Pumps Electric Pumps Air Pumps

Strokes per inch of plunger travel

Two-Speed @100 psi air

Seconds per inch of plunger travel

No loadLoad

No loadLoad

No loadLoad

No loadLoad

No loadLoad

Note: Values are approximate. Cylinder speed may vary in actual application.

Cylinder and Pump Selection Chart

Cylinder Mounting Block

V- Blocks

Hydra-Lift™

PumpMountingBracket

10 ton Bench10 ton H-Frame25 and 30 ton H-Frame50 ton H-Frame100 ton H-Frame200 ton H-Frame

10 ton Bench Press10 ton H-Frame25 and 30 ton H-Frame50 ton H-Frame100 ton H-Frame150 & 200 ton H-Frame200 ton Roll Frame

25-100 ton H-Frame150-200 ton H-Frame50 and 100 ton Roll Frame200 ton Roll Frame

Hand operated and small Air Pumps; P-80, P-84, P-142, P-392, PA-133, XA, Turbo II pumps

Electric, large Hand Pumps, and ZA4 Air Pumps; ZE Series, P-462, P-464, 10/90 Series Air Pumps

• AD-175 converts the Bench press to use an RD-9 ton cylinder

• All mounting blocks allow horizontal movement of cylinder

• Machined from high strength steel for long life

• A-110 includes one V-block • All other model numbers

include two V-blocks

• Allows easy, effortless daylight adjustments

• Includes accessory chain

• Both mounting brackets are pre-drilled to accept a number of different pump models

Description FrameCapacity

ModelNumber

Features

Cylinder SpeedThis chart will help you calculate the time required for an Enerpac cylinder to extend when powered by a 10,000 psi Enerpac hydraulic pump. The Cylinder Speed Chart can also be used to determine the pump type and model best suited for an application when you know the plunger speed required.

ZA4

10

25

30

50

100

1515343443437373137137

4158341043167330137

215534743117321137

18118123238371

.76.71.5

15.51.9

19.53.3

33.26.2

61.9

.96.72.1

15.52.6

19.54.4

33.28.3

61.9

.33.4.7

7.7.9

9.801.5016.62.8

31.0

.22.2.5

5.2.6

6.51.0

11.01.9

20.7

.21.1.4

2.6.5

3.3.8

5.51.5

10.3

1.109.002.60

20.603.20

26.005.50

44.2010.3082.50

2.7016.806.20

38.607.50

48.7013.3082.9224.80

154.70

.2114.90.48

34.30.60

43.301.00

73.701.90

137.50

AD-175IPK-1012IPK-3012PK-501PK-1002PK-2002

A-110A-136A-130A-150A-175A-200A-200R

IPL-100IPL-101IPLR-100IPLR-200

PMB-1

PMB-2

.164.50.36

10.30.46

13.00.80

22.101.50

41.30

159

x=

IP H - 050 S 06 - 1

Custom Built Presses

IP Series

Capacity:



10,000 psi

“No Load” indicates the plunger speed as it extends toward the load (1st stage). “Load” indicates the plunger

speed as the load is applied at a system pressure of 10,000 psi (2nd stage).

Formula V = A ÷ Q

V (sec/in) = A (in2) ÷ Q (in3/min)

V = Cylinder plunger speed in seconds per inch

A = Cylinder effective area in square inches (in2)

Q = Pump oil flow in cubic inches (in3)

Cylinder Plunger Speed (sec/in)

60 sec1

Cylinder Effective Area (in2)Pump Flow Rate (in3/min)

1Product

Type

2Frame Type

3Press

Capacity

4Cylinder

Type

5Cylinder Stroke

1 Product Type IP = Industrial Press

2 Frame Type H = H-Frame R = Roll Frame 1)

3 Press Capacity 010 = 10 ton 025 = 25 ton 030 = 30 ton 050 = 50 ton 100 = 100 ton 150 = 150 ton 200 = 200 ton

4 Cylinder Type S = Single-Acting (RC-Series) D = Double-Acting (RR-Series)

Model number: IPH-050S06-2

IPH-050S06-2 is a 50-ton H-Frame press with a single-acting, 6 inch stroke cylinder (RC-506). It has a pump mounting kit (for an electric Pump or a Modular Air Pump).

See the cylinder and pump selection chart on previous page for selecting the proper pump.

1) Roll Frame Press: 50-, 100- and 200-ton press capacity only. (Assembly required) 2) Includes hoses for press, except for option 0.

6Pump

Mounting Kit

CUSTOM BUILD YOUR OWN PRESSIf the press that would best fit your application cannot be found in the charts, you can easily build your custom press here. All presses must be ordered with cylinders. The pump is ordered separately.

▼ This is how a press model number is built up:

Ordering Example

5 Cylinder Stroke (in)- 10 ton S/A: 06, 08, 10, 12, 14 10 ton D/A: 10, 12- 25 ton S/A: 06, 10, 12, 14- 30 ton S/A: 08 30 ton D/A: 08, 14- 50 ton S/A: 06, 13 50 ton D/A: 06, 13, 20- 100 ton S/A: 06, 10 100 ton D/A: 06, 13, 18- 150 ton D/A: 06, 13, 32- 200 ton D/A: 13, 18, 24

6 Pump Mounting Kit 2)

0 = No mounting kit 1 = Hand operated and small air pumps: P-80, P-84, P-141, P-142, P-202, P-391, P-392, PA-133 and all Turbo II Air pumps 2 = Electric, large hand operated and modular air pumps: PUJ-12, PEM-12, ZE3-6 Series P-462, P-464 PAM-10 and -90 Series

▼

160 www.enerpac.com

DA

BC

G (2x) EF

G F

A

D

1/2"-13UNC

CB

E

5/8"-11UNC

Tension Meter and Load Cells Shown: LH-102 and TM-5 (in middle)

TM, LHSeriesCapacity:

2,000 to 200,000 lbs. Accuracy, % of full scale:

± 2%

Direct MountedDirect Load Cell Mounted

Remote Mounted with 2 ft. Hose

Remote Mounted with 6 ft. Hose

Model Number

Gauge Capacity

Tension Meter TM-5• Accuracy, ± 2% of full scale• Zinc and bronze plated to resist rust and corrosion• Dual-range readout in kilograms and pounds• Cushioned metal case provides safe storage

and transport• Maximum indicating pointer reading for pre-selected

forces or to maintain maximum force readings

Load Cells LH Series• Accuracy, ± 2% of full scale• Swivel loading pad reduces eccentric loading for

improved accuracy• Maximum indicating pointer reading for pre-selected

forces or to maintain maximum force readings• Dual-range readout in kilograms and pounds

LH-Series

TM-5

Type

(lbs) (kg) A B C D E F G

Minimum Reading

Gauge Increments

(lbs)(kg) (kg)(lbs)

Dimensions (in)

TM and LH models are 100% tested to verify accuracy within a ± 2% range.

If your application requires a calibrated tool, it must be submitted for certification testing.

Certification is NOT available from Enerpac.

10,0002,00010,0002,00010,00020,00050,000100,000200,000

4.753.063.063.063.063.064.005.226.22

9.751.751.751.751.751.752.754.005.00

9.292.252.252.252.252.253.385.006.25

2.002.382.382.382.382.382.382.382.38

4.004.004.005.815.815.815.815.815.81

.8810.0010.0033.3133.1033.1082.4484.0685.31

.75 ¼"-20, 1.75" bc

¼"-20, 1.75" bc

¼"-20, 1.75" bc

¼"-20, 1.75" bc

¼"-20, 1.75" bc

⅜"-24, 2.5" bc

⅜"-24, 3.5" bc

⅜"-24, 4.0" bc

TM-5LH-10LH-50LH-102LH-502LH-1002LH-2506LH-5006LH-10006

4500900450090045009000210004500090000

500100500100500

100025002500

10000

10020

10020

100200500

1,0002,500

10020

10020

100200500

10001000

1,000200

1,000200

1,0002,0005,0005,00020,000

.62

161

FPO

Custom Hydraulic Presses

CUSTOMIZABLE FEATURES:• Capacity

• Cylinder Stroke

• Pump Type

• Controls

• Guarding

• Daylight Dimensions

With decades of experience and in-house capabilities look to Enerpac to help find solutions to your customization needs.

Next to our large range of standard workshop presses, Enerpac offers the possibility of customization. Because many customers have specific requirements, we offer turn-key project management, including design, engineering and manufacturing. As the market leader, we listen to our customers and with our world

wide experience we offer the best solutions, especially when safety is not negotiable. Whether a longer stroke, wider frame or complete new design is required, our custom product group has many years of experience in multiple industries to deliver

a solution that meets or

exceeds expectations.

◂ Fully Automated PLC-Controlled 1800-Ton, High-Accuracy Press

◂ 50-Ton Workshop Press for Maintenance Jobs

◂ 100-Ton Press for Assembly of Spring-Loaded Cylinders

OVERVIEW

▴ Enerpac’s hydraulic presses can be configured to fulfill a broad range of applications. Each press is designed and manufactured according to customer specifications and in cooperation with our engineering team.

CONFIGURATIONS• Vertical and horizontal press

• Cylinders mounted in upper and lower bolsters

• Height built to customer specifications

• Daylight (vertical and horizontal) built to customer specifications

Documents

Enerpac Hydraulic Presses