ENGINE DRIVEN PUMPS PRODUCTS · • Self-priming* to 25' of suction lift Aluminum Water Transfer Pump Kit 5RLAG-2L 5RLAG-2LKIT Model Item Max Flow Max Head Suction Lift Suction/ Discharge

PRODUCTSENGINE DRIVEN PUMPS

redlionproducts.com | Hotline: 1.888.885.92542

With over 80 years of experience, Red Lion is the leader in water transfer pumps. Count on Red Lion to help you select the best well pump for your needs.

Red Lion Pumps

The majority of gasoline powered pumps sold in North America are referred to as general purpose, utility, or transfer pumps. This is simply moving liquid from one point to another. Pump construction can be a variety of materials. Preference is given to lightweight materials and portability.

What does an Engine Driven Pump do?

Types of Engine Driven Pumps

Pumps designed to handle today's agricultural chemicals (fertilizer, herbicides, and pesticides) would fall into this category. Construction is either a poly derivative or cast iron. Aluminum is usually not used as it does not provide strong chemical resistance. Solids handling is not required. The seal elastomer is usually EPDM or fluoroelastomer.

Agricultural

A pump is considered semi-trash if it has some solids handling capabilities. The pump impeller is usually semi-open vane clearance to pass a spherical solid ½" to ¾" diameter. The mechanical seal faces are usually of a hard material like silicon carbide for abrasion resistance. Typical applications are drainage, construction dewatering, etc.

* All references to Self-priming requires an initial fill of water. No additional priming is required after the initial fill.

Semi-Trash

Similar in application to a semi-trash pump, except that solids handling is typically 50% of suction port size (usually greater than 1" solids). Most manufacturers allow for a removable casing to allow access to internal hydraulics for cleaning and repair.

Trash

3

GAS ENGINE DRIVE

Category Construction Application Examples

General PurposePoly

AluminumCast Iron

Water TransferFlood Control

AgriculturalPoly

AluminumCast Iron

Chemical Transfer (Fertilizer)Nurse Trailer

Solids HandlingAluminumCast Iron

ConstructionSemi-Trash

Trash

High PressureAluminumCast Iron

IrrigationFire Fighting

6RLPG-2U - Agriculture

6RLAG-2LST - Solids Handling

2RLAG-1L - General Purpose


• Durable cast iron, semi-open style impeller

• Lightweight aluminum construction with base and handle for portability

• Self-priming* to 25' of suction lift

• Built-in check valve

• EPA certified

• Includes 1'' adapter

Aluminum Water Transfer Pump2RLAG-1L

Model ItemMax Flow

Max Head

Suction Lift

Suction/Discharge Size

Fuel Tank

Engine

2RLAG-1L 617031 60 gpm 79' 25'1.5" x 1.5"

MNPT1.7 qt

Air Cooled, 4 Stroke, OHV (79cc)

Priming Port

Cast Iron Internal Volute

Cast Iron Impeller

Carbon/Ceramic Mechanical Seal

Lightweight Aluminum Pump Housing

Drain Plug

1-1/2" MNPT Discharge

1-1/2" MNPT Suction

Built-in Check Valve

This pump is designed for pumping water only.

Ideal for general purpose use where portability is required such as liquid transfer and contractor dewatering applications

5

GAS ENGINE DRIVE

Aluminum Water Transfer Pump

• Powered by commercial grade Honda GX120 engine


• Lightweight aluminum outer casing includes heavy-duty roll frame



• EPA certified

4RLAG-2H

Model ItemMax Flow

Max Head

Suction Lift


Fuel Tank

Engine

4RLAG-2H 617056 150 gpm 98' 25' 2" x 2" MNPT 2.1 qtHonda GX120, Air Cooled, 4 Stroke,

OHV (118cc)

Powered by HONDA™ is a registered trademark of Honda Motor Co., Ltd.


Ideal for general purpose use in high volume liquid transfer and contractor dewatering applications



• Lightweight aluminum outer casing; includes heavy-duty roll frame


• Kit includes 12' reinforced suction hose with stainless steel strainer, 50' lay-flat discharge hose and attached couplings, as well as two 2" aluminum adapters for use with quick connect couplers

• EPA certified


Aluminum Water Transfer Pump Kit5RLAG-2L 5RLAG-2LKIT

Model ItemMax Flow

Max Head

Suction Lift


Fuel Tank

Engine

5RLAG-2LKIT(pump and

hose kit)617030 150 gpm 92' 25' 2" x 2" MNPT 3.8 qt

Air Cooled, 4 Stroke OHV

(179cc)

5RLAG-2L(pump only)

617033 150 gpm 92' 25' 2" x 2" MNPT 3.8 qtAir Cooled,

4 Stroke OHV (179cc)

Ideal for general purpose use in high volume liquid transfer and contractor dewatering applications.


7

GAS ENGINE DRIVE


• Lightweight aluminum outer casing includes heavy-duty roll frame

• Wear-resistant silicon carbide mechanical seal



• EPA certified

• The 6RLAG-3HST is powered by the HONDA™ GX160

Aluminum Semi Trash Pumps

Model ItemMax Flow

Max Head

Suction Lift


Fuel Tank

Engine

6RLAG-2LST 617034 150 gpm 92' 25' 2" x 2" MNPT 3.8 qtAir Cooled,


6RLAG-3LST 617037 264 gpm 85' 25' 3" x 3" MNPT 3.8 qtAir Cooled,


6RLAG-3HST 617041 264 gpm 85' 25' 3" x 3" MNPT 3.8 qt

Commercial grade Honda

GX160, Air Cooled, 4 Stroke

OHV (163 cc)

6RLAG-3LST 6RLAG-3HST6RLAG-2LST

6RLAG-2LST 6RLAG-3LST

6RLAG-3HSTPowered by HONDA™ is a registered trademark of Honda Motor Co., Ltd.

Ideal for high volume water transfer and dewatering. Can handle liquid slurries including sand, pebbles, and suspended solids less than 1/2" in diameter.



• Powered by 208cc hp 4 stroke air cooled OHV engine

• Removable aluminum outer casing with cast iron inner volute and impeller for durability

• Silicon carbide seal for abrasion resistance and trash application

• Handles up to 1-1/4" solids

• Includes heavy-duty roll frame

• EPA certified


Model ItemMax Flow

Max Head

Suction Lift


Fuel Tank

Engine

6RLAG-3LTT 617038 285 gpm 75' 25' 3" x 3" MNPT 3.8 qtAir Cooled,


Aluminum Trash Pump6RLAG-3LTTIdeal for high volume water transfer and construction-grade dewatering applications. Can handle liquid slurries containing sand, small rocks, and other debris less than 1-1/4" in diameter.


9

GAS ENGINE DRIVE

• Heavy-duty cast iron pump casing

• Durable cast iron semi-open type impeller

• Stainless steel shaft sleeve and EPDM elastomer seal

• 2" FNPT suction and discharge for convenient hookup


• Handles most liquid agricultural chemicals

• Handles up to 5/8" solid debris

• Powered by Kohler engine

• EPA certified

Engine Driven Cast Iron Transfer Pump5RLGF-8KRF

Model ItemMax Flow

Max Head

Suction Lift


Fuel Tank

Engine

5RLGF-8KRF 617032 170 gpm 95' 25' 2" x 2" FNPT 3.8 qtKohler, air cooled,

4 stroke, OHV (196cc)

Powered by KOHLER® is a registered trademark of KOHLER Co.

Not to be used for applying driveway sealant.

Powered by

Ideal for liquid transfer including most agricultural chemicals and general dewatering where rugged portability is important.


• Lightweight, corrosion-resistant construction


• Integrated check valve and carry handle

• Rubber feet to dampen vibration

• EPA certified

• Carbon ceramic with EPDM elastomer seal

6RLPG-2K

• Powered by Kohler 6.5 hp engine

• Lightweight, corrosion-resistant construction


• Integrated check valve

• Rubber feet to dampen vibration

• EPA certified

• Carbon ceramic mechanical seal with EPDM elastomers

• Includes heavy-duty roll frame

Model ItemMax Flow

Max Head

Suction Lift


Fuel Tank

Engine

6RLPG-2U 617070 195 gpm 135' 25' 2" x 2" FNPT 3.8 qtAir Cooled, 4 Stroke

OHV (212cc)

Model ItemMax Flow

Max Height

Suction Lift


Fuel Tank

Engine

6RLPG-2K 617071 195 gpm 142' 25' 2" x 2" FNPT 3.8 qtKohler, Air Cooled, 4 Stroke OHV (196cc)

Thermoplastic Chemical Transfer Pumps6RLPG-2U

Powered by KOHLER® is a registered trade of KOHLER Co.

Powered by

Ideal for sprayer applications such as liquid fertilizers and ag chemicals

Ideal for sprayer applications such as liquid fertilizers and ag chemicals

Not to be used for applying driveway sealant.

11

GAS ENGINE DRIVE

• Includes:

• 12' reinforced suction hose

• 50' lay-flat discharge hose with attached couplings

• Two 2" aluminum adapters (for use with quick connect couplers)

• Stainless steel strainer

2" HOSE KIT

• 3" steel strainer

• Aluminum adapter for cast iron pump applications

• Spanner wrench

3" HOSE KIT

Model Item Suction Hose Discharge Hose

2HKP 617212 2" I.D. x 12' PVC 50' Lay-Flat

3HKM 617201 3” I.D. x 20’ PVC 50’ Lay-Flat

3HKM

2HKP

Our hose kits are designed to work with engine driven water pumps and include all of the attachments required to complete your applications. Temperature range is 15 °F to 150 °F.

20' PVC suction hose and 50' discharge hose assemblies in 3" ID for attachment to a poly or cast iron pump. Includes:


Item Where Used Description

617300

2RLAG-1L

Minor repair kit contains mechanical seal, casing, O-rings, volute square-ring

617310Major repair kit contains all internal components (impeller, volute, seal,

casing, O-ring, volute square-ring, shaft key)

617320 Casing kit contains casing and hardware

617340Suction and discharge flange kit contains suction flange, discharge

flange, gaskets for both, plugs, bushings, and hardware

617350 Handle/base assembly contains handle, base, rubber feet, and hardware

617100

4RLAG-2H

Overhaul kit contains mechanical seal, impeller, O-ring, and hardware

617101Discharge kit contains cap plug, square gasket, discharge flange,

O-ring, and hardware

617102Suction/drain kit contains cap plug, check valve, suction flange,

O-ring, and hardware

617103Pump end kit contains adapter, O-rings, mechanical seal, impeller,

housing volute, U-type packing, cap plugs, discharge flange, square gasket, pump housing, check valve, suction flange, and hardware

617114 Roll frame kit contains roll frame, rubber feet, and hardware

617125 Mechanical seal kit contains carbon/ceramic mechanical seal and hardware

617321

5RLAG-2LKIT

Casing kit contains casing and hardware


flange, gaskets for both, plugs, and hardware

617351 Roll frame assembly contains roll frame, rubber feet, and hardware

617322

6RLAG-2LST

Casing kit contains casing and hardware




6173015RLAG-2LKIT6RLAG-2LST




REPAIR KITS

13

GAS ENGINE DRIVE

Item Where Used Description

617302

6RLAG-3LST6RLAG-3HST








617303

6RLAG-3LTT

Minor repair kit contains mechanical seal, casing O-rings, volute square-ring





flange, gaskets for both, plugs, bushings, and hardware


6173576RLAG-3LST6RLAG-3HST6RLAG-3LTT

Two 3" to 2" reducers

617330

2RLAG-1L5RLAG-2LKIT6RLAG-2LST6RLAG-3LST6RLAG-3HST6RLAG-3LTT

Accessory kit contains priming plug, drain plug with O-ring seals attached

617304

5RLGF-8KRF






640197RLCGF-5

Gasket, shaft sleeve, mech. seal - fluoroelastomer/stainless steel

617198 Cast iron impeller

REPAIR KITS


NOTES:

15

GAS ENGINE DRIVE

NOTES:

Form #996371 | Rev. 003 | 02/19

redlionproducts.com1.888.885.9254

Documents

ENGINE DRIVEN PUMPS PRODUCTS · • Self-priming* to 25' of suction lift Aluminum Water Transfer Pump Kit 5RLAG-2L 5RLAG-2LKIT Model Item Max Flow Max Head Suction Lift Suction/ Discharge