Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
Oil Consumption Monitoring in AMOS
Current Process for Oil Monitoring1. Engineer records Quantity of Oil Uplifted for the particular flight sector in the
Techlog.2. Data Entry Operator in Technical Services Powerplant Section updates the Oil
Consumption data for the A/C manually in excel sheets.3. The data in the excel sheets are plotted as a graph for monitoring and submitted to
Regulatory Authorities / OEM / Lessor as and when required.Example : Oil Consumption Graph for ESN 962286 VT-JFD attached below.
ENGINE SR.NO 962286 A/C.VT-JFD POSITION : R.H
5.4.
13
5.2.
13
10.2
.13
15.2
.13
20.2
.13
25.2
.13
28.2
.13
5.3.
13
10.3
.13
15.3
.13
20.3
.13
25.3
.13
31.3
.13
10.4
.13
15.4
.13
20.4
.13
25.4
.13
30.4
.13
0.00
0.20
0.40
0.60
0.80
1.00
1.20
1.40
1.60
1.80
600 700 800 900 1000 1100 1200 1300 1400 1500
ENGINE HOURS SINCE NEW
OIL
CO
NSUM
PTIO
N IN
Q
UART
S /
HO
UR
FOR M NO. : JA / E &M / T SD / 42 R 0 D A T E D 14 A UG 2012
Proposed process for Oil Consumption Monitoring
In order to introduce Engine Oil Consumption Monitoring in AMOS, TS Powerplant section along with AMOS team have been updating Oil Consumption data in excel and AMOS for 1 year to check if any variations exist. The data entered in AMOS has been verified and found to be accurate.Example : Oil Consumption report for VT-JFD extracted from AMOS is attached below.
Process Flow - Data Entry
Process Flow - Data Entry
4) Select sector in which Oil was uplifted
1)Select A/C Type
2) Select A/C Tail
3) Click Search
5) Select Show Special Data
Process Flow - Data Entry
Input Oil Uplift data
Process Chart – Data Entry
OPEN AMOS ENGINEERING AIRCRAFT
AIRCRAFT UTILZATION
SELECT A/C TYPE
APPLICATIONS
CLICK SEARCH
CLICK SAVE FLIGHTLOG
SELECT SECTOR WITH OIL UPLIFT
SELECT SHOW SPECIAL DATA
ENTER QTY OF OIL UPLIFTED
SELECT A/C TAIL
The above process is to be followed for entering Oil Uplift Data in AMOS.
Process Flow - Monitoring
Process Flow - Monitoring
Process Flow - Monitoring
Alert Level
Oil Consumption Report
1) SELECT A/C TYPE
4) CLICK SEARCH
3) SELECT APU
2) SELECT A/C TAIL
Oil Consumption Report
Process Chart – Data Entry
OPEN AMOS ENGINEERING POWERPLANT
OIL CONSUMPTION STATISTICS
SELECT A/C TYPE
APPLICATIONS
CLICK SEARCH TO DISPLAY GRAPH
SELECT A/C TAIL
The above process is to be followed for extracting Oil Consumption Graph for a particular Aircraft / Engine.
Oil Consumption Report – Engine Change
Engine Changes can be marked in the report by selecting the “Show Engine Changes” option
In the below example it shows the Hrs at which the RH engine waschanged.