Embed Size (px)
Citation preview
Engineered for a Lifetime
Born on the Western Plains of Northern NSW, in 1984, Faber Toolboxes were developed to suit the needs of mobile cotton farm mechanics for secure tool storage under Xtreme operating conditions.
The ability to perform under blazing sun, rough driving across corrugated paddocks and levee banks, dust storms and torrential rain, has made our toolboxes the box of choice for Mining, Earthmoving, Contractors, Service Technicians, Farmers and Tradesmen.
A wide range of boxes is available to suit a variety of uses, with many custom-made to individual requirements.
Manufactured in Narrabri, Australia, we produce our unique weatherproof designs in 1.6mm hot rolled steel, laser cut and welded to provide robust construction with no moving parts which could fail.
Once assembled, all boxes are abrasive blasted, powdercoated with a 98% zinc rich primer and finished with a second colour powdercoat, providing a tough, rust resistant finish. Laboratory tests have shown this double powdercoat finish outperforms standard powdercoats under continuous salt spray conditions.
To keep tools and equipment dry in wet weather, we developed
Over two decades of development
a unique system of drainage gutters and channels on drawered models and have enhanced this system on slope sided drawered models with rain gutters on the lids to divert water away from drawers.
Xtreme versions are available with automotive rubber door seals and additional drainage systems to enable boxes to remain dry inside during pressure washing.
All hardware is chosen to prevent water ingress and for rust resistance. Across the range of toolboxes we use only sealed rivets, galvanised lid hinges with brass pins, zinc coated hasp n staples and stainless steel plate hinges and fittings. Lockable ‘click in’ handles are used on slope sided models to prevent unlocked latches rattling loose when you’re driving along bumpy, corrugated roads while gas struts keep lids open when you’re foraging for your tools.
With all this attention to detail it’s no wonder that all models are covered by a 20 year warranty and are sought after in a thriving second hand market. All Faber models can be traded regardless of age.
That’s why we can proudly boast ‘Engineered for a Lifetime’.
Combined Storage www.fabertoolboxes.com.au
OFFSIDER IVnOtE: alSO aVaIlablE In VI DRawER mODEl
OFFSIDER II OFFSIDER VIJaCKaROO II
RanCHER II
XtREmE OFFSIDER IV nOtE: alSO aVaIlablE In VI DRawER mODEl
tRaDESman
TOOLBOX Locking Pin Removeable Drawers Gas Strut Shelves L W H Weight top trays kg
JACKAROO II 1 - 2 2 2 700 600 750 65OFFSIDER II 2 - 2 2 1.5 1500 600 750 140 OFFSIDER IV 2 - 4 2 1.5 1500 600 750 152OFFSIDER VI 2 - 6 2 1.5 1500 600 850 195XTREME OFFSIDER II - - 2 4 1.5 1500 600 900 160XTREME OFFSIDER IV - - 4 4 1.5 1500 600 900 180
XTREME OFFSIDER VI - - 6 4 1.5 1500 600 1000 220
RANCHER II 1 - 2 2 - 1600 480 400 70RANCHER III 1 - 3 2 - 1600 480 495 90TRADESMAN 1 2 3 2 - 1700 500 490 98
RanCHER III
XtREmE OFFSIDER II
Storage for Small Tools
mUStanG IV
mUStanG III
mUStanG II
tItan II
bRUmbYIInOtE: DRawER DEptH IS 60mm
tItan IVtItan III
bUDDYbUD
TOOLBOX Locking Pin Removeable Drawers Gas Strut L W H Weight top trays kg
BUD - 1 - - 500 300 180 12
BUDDY - 1 - - 500 300 300 14
BRUMBYII 1 2 2 - 500 300 330 28
MUSTANG II 1 2 2 option 550 400 420 38
MUSTANG III 1 2 3 option 550 400 530 46
TITAN II 1 4 2 1 700 400 430 49
TITAN III 1 4 3 1 700 400 585 65
TITAN IV 1 - 4 1 700 400 585 66
MUSTANG IV 2 4 4 2 1100 400 420 80
Storage for Large Tools www.fabertoolboxes.com.au
HERCUlES IIIHERCUlES II
HERCUlES IV HERCUlES VnOtE: StanDaRD wItH FORK lIFt SlOtS
SamSOn IIISamSOn II
SamSOn IV
pRO nOtE: DRawER DEptH IS 110mm
TOOLBOX Locking Pin Removeable Drawers Gas Strut L W H Weight top trays kg
PRO 1 4 1 1 720 540 400 68
SAMSON II 1 4 2 1 720 540 485 68
SAMSON III 1 4 3 1 720 540 600 78
SAMSON IV 1 - 4 1 720 540 600 80
HERCULES II 1 5 2 1 880 540 490 80
HERCULES III 1 5 3 1 880 540 600 87
HERCULES IV 1 - 4 1 880 540 600 91
HERCULES V 1 - 5 1 880 540 730 120
Bulk Storage
OFFSIDER DROpSIDER
JaCKaROO
XtREmE DROpSIDER
JaCKaROO/DROpSIDER tROllEY
bUIlDER
wORKbEnCH
maStER bUIlDER
SQUattER
TOOLBOX Removeable Gas Strut Shelves L W H Weight top trays kg
JACKAROO - 2 2 700 600 750 48
JACKAROO/DROPSIDER - 2 2 700 600 750 50
BUILDER 2 - - 800 440 355 27
MASTER BUILDER 2 - - 1200 440 355 34
SQUATTER 2 - - 1600 480 340 50
OFFSIDER - 2 2.5 1500 600 750 102
DROPSIDER - 2 1.5 1500 600 750 110
XTREME DROPSIDER - 4 1.5 1500 600 900 140
TROLLEY - - 1 910 550 910 50
TROLLEY II - - - 910 620 910 65
WORKBENCH - - 1 2400 770 940 250
www.fabertoolboxes.com.au
tROllEYII nOtE: OptIOnal SIDE SHElF aVaIlablE
Ray Faber Sheetmetal P/L47 Francis St Narrabri NSW 2390 Australia Ph: +61 2 6792 2010 fax: +61 2 6792 3621 email: [email protected] www.fabertoolboxes.com.au
All drawers are fitted with Stainless Steel Handles affixed with waterproof sealed rivets and are 75mm Deep unless otherwise noted.
Some boxes come with lift out trays for storage of small items under the lid.
All drawered toolboxes include a central locking pin which ensures that your drawers stay shut.
Channels are integrated into the front of the drawers to channel water away from your tools.
Toolbox lids come with a full length galvanized piano hinge with brass pin, welded at each end to maximise lid strength and security.
Most toolboxes are fitted with gas struts to keep the lid open while you forage for tools.
Slope sided boxes come with a double folded internal waterproof lip.
Our lockable click in swing handles stay closed when you’re driving on the roughest of surfaces.
Xtreme Dropsider series includes a handy work bench on the fold out tray. There is a 20kg load limit on the workbench door.
Stainless steel hinges and fixtures are fitted to all our Xtreme series boxes.
The Xtreme Toolboxes include rubber seals to seal out both dust and water under pressure.
Features at a glance
Dealer
All drawered models are standard with drawer divisions and can be modified upon request. Refer to website for full drawer details.
