ENGINEERING & SOLUTIONS

> 200different APIs

handled/yearCapacity:

> 1000MT/year

> 40years

of experience

Experience with

1000different APIs

Containment

down to

70 ng/m³

With over 40 years of experience, swiss-based

Micro-Macinazione S.A. is the most competent provider

of Micronization services and equipment for the

Pharmaceutical & Fine Chemical industry.

NEWSNEWS

The new MC20 allows micronization

of small gram batches in an

easy-to-use and clean table top unit.

A revised layout of the pilot line

allows interchangeable use of

different mills (MC50, MC100,

MC150) on the same installation.

- Jet mill geometries improvement

- High standard production line

- High standard containment pilot line

NEW ENTRYIN THE LAB LINE

NEW DESIGNFOR THE PILOT LINE

MORETO COME SOON

LAB LINE MC 20 / MC 44

Technical data sheet

TECHNICAL DETAILS MC 20 Air consumption at 7 [bar) 0,06 Nm3/min. Feed rate Kg/h 0,001 min-0,5 max Initial granulometry 500 max µm Final fineness 0,5÷10 max ranges µm Mill size 20 mm / 1/2" Dimensions 200x330x670 mm Weight 10 kg

MC 440,3 Nm3/min.0,01 min-0,6 max500 max µm0,5÷10 max ranges µm44 mm / 1 3/4"310X390X640 mm25 kg

PILOT LINE MC 50 / MC 100 / MC 150TECHNICAL DETAILS MC 50 Air consumption at 7 [bar) 0,41 Nm3/min. Feed rate Kg/h 0,05 min-1 max Initial granulometry 500 max µm Final fineness 0,5÷10 max ranges µm Mill size 66 mm / 2 1/2" Dimensions 940x1450x1900 mm Weight 250 kg

MC 1000,8 Nm3/min.0,25 min-5 max700 max µm0,5÷10 max ranges µm100 mm / 4"940x1450x1900 mm250 kg

MC 1501,8 Nm3/min.1 min-15 max1500 max µm0,5÷10 max ranges µm150 mm / 6"940x1450x1900 mm250 kg

COMPACT PRODUCTION LINE MC 200TECHNICAL DETAILS MC 200 Air consumption at 7 [bar) 3,1 Nm3/min. Feed rate Kg/h 1 min-30 max Initial granulometry 800 max µm Final fineness 0,5÷10 max ranges µm Mill size 200 mm / 8" Dimensions 2000x2500x2700 mm Weight 300 kg

PRODUCTION LINE MC 300 / MC 500 / MC 600TECHNICAL DETAILS MC 300 Air consumption at 7 [bar) 6,5 Nm3/min. Feed rate Kg/h 5 min-100 max Initial granulometry 1000 max µm Final fineness 0,5÷10 max ranges µm Mill size 300 mm / 12" Dimensions 2500x3000x4200 mmWeight 1100 kg

MC 50019 Nm3/min.10 min-500 max1000 max µm0,5÷10 max ranges µm500 mm / 20"2700x3000x420 mm1250 kg

MC 60027 Nm3/min.15 min-700 max1000 max µm0,5÷10 max ranges µm600 mm / 24"2700x3000x4200 mm1400 kg

Pilot Line

A full optional unit for the most demanding requirements in terms of efficacy,safety, comfort and quality.

A TURN-KEY SOLUTION

The unit is designed to mount an MC50, MC100 or MC150.There’s no need to change the controls, feeder or filtration system.For a quick, easy, and immediate scale-up.

FLEXIBILITY

Different products have differentchallenges requiring unique approaches.We know this and adjust and optimizethe geometry of the milling chamberto the requirements of your product. Without glue, without waste of time.It’s easy, fast and cheap.

OPTIMIZED SETTINGS

Technical data sheet

Glove Boxes

Our standard Glove Box is a fully customized unit. Every detail of the machine from the design, to its software and validationis tailor made around your requirements.

OUR STANDARD SOLUTION

You tell us what you need and we recommend how to design it. We use our own designed glove boxes every day to provide Europe’s largestmicronization service. We are experts on how to operate a glove box,that’s the difference.

AN END USER POINT OF VIEW

The reason why you are looking for a glove box is because you care aboutyour operators. You don’t make compromises when it comes to safetyand neither do we.

SAFETY FIRST

Opposite Jet Mills

OPPOSITE JS 100 / JS 300 / JS 400TECHNICAL DETAILS JS 100 Air consumption at 7 [bar) 0,6 Nm3/min. Feed rate Kg/h 0,5 min-5 max Initial granulometry 5000 max µm Final fineness 0,5÷10 max ranges µm

JS 3003,6 Nm3/min.5 min-100 max5000 max µm0,5÷10 max ranges µm

JS 4001,4 Nm3/min.8 min-300 max5000 max µm0,5÷10 max ranges µm

You look for a fluidized bed in orderto optimize your micronizationprocess. With a titanium core ouropposite Jet Mills offer youthe possibility to optimize the set upaccording to your product, witha real time control of your process.

OPTIMIZED PROCESS

NEWSNEWS

Micro-Macinazione SA - Address: Via Cantonale 4 - CH-6995 Molinazzo di MonteggioPhone: +41(0)91 611 36 36 - Fax: +41(0)91 611 36 99 - e-mail: info@micromacinazione.com - www.micromacinazione.com

ww

w.m

arke

thin

k-ac

tion

.it