English

Procedure TextHow to Make a Hole Starby Francesco MancinniNur Auliyah ShiyamD51114006Mujadit Sigit AliahD51114007HardianaD51114008

things you need :.cutter/scissor.both of your hand.30 pieces of paper size of the paper is 3 to 4. you just have to fold your origami paper into two sides, just pinch it. then fold the paper up to the middle. then cut it. now you have 3 to 4 paper size.

1. Fold the paper into two sides.Then fold it again up to the middle. do this too for the other side.

2. the middle point, is our point of focus now. Fold one of the edge at the corner until it close enough into the middle point.

3. then make a valey fold along the length of the fold that we made just now. so that the line at the middle aligned with the corner. do the same thing at the opposite side of it.

4. next, turn the paper over and fold the middle point of the paper up to the middle poont of the other side.

5. after that, fold the middle line that we made just now, by putting the left point of it into the middle line of the paper. but fold only the right side of it.

6. then make a valey fold along the the length in the middle, and another valey fold on the other side at the same time.

7. next, fold the corner of the flat paper into the side of the fold paper in the middle. then fold again along the length of the paper model. turn the paper over and do the same thing.

8. now, we have one piece of a hole star. next step is to make 30 pieces of this paper model.9. we are almost there. after having 30 pieces of the model, we are going to join it into one hole star

10.now we gotta take two paper models and join it. we have to put the flat paper at the corner, that we had fold twice, inside the pocket of another paper model.

11. after that take another piece of the paper model. then insert the flat corner of the second piece into the pocket of the third piece.

12. and then, we have to close the first piece into the third piece just like the step before. but this part is little bit difficult, because, the first or the second pieces that we had joined before may getting out from its place. so you better watch your hand.then you have to do this until you get the five corner of the hole star13. and at last, you have to join the rest of the pieces until you close enough to the form of the star that consist of this 30 pieces of the paper model.

THANKS