Upload
hangoc
View
237
Download
5
Embed Size (px)
Citation preview
2017.12Cleaner Series
6
Robotic Cleaner
Cordless Backpack Vacuum Cleaner
Cordless Vacuum Cleaner
Cordless Vacuum Cleaner
(wet & dry)
Corded and Cordless Vacuum Cleaner(wet & dry)
Corded and Cordless Vacuum Cleaner
Cordless Cyclone Cleaner
Cordless Cleaner
Cordless Cleaner
Cordless Cleaner
Cordless Cleaner
DRC200Page 6, 7
DVC260Page 8 & 9
DCL501DCL500Page 12 & 13
DCL180Page 15
DCL180FTrang 15
CL106FDPage 15
DCL182Page 14 DCL182F
Page 14
CL107FDPage 14
DVC863LPage 11
VC1310LPage 16 & 17
VC2510LPage 16 & 17
VC3210LPage 16 & 17
DVC862LPage 11
DVC861LPage 10 DVC860L
Page 10
C L E A N E R S E R I E S
Cordless Cleaner(Lithium-ion buit inbattery with charger)
Cordless Cleaner(Lithium-ion buit inbattery with charger)
Vacuum Cleaner(wet & dry) 13L
Vacuum Cleaner(wet & dry) 25L
Vacuum Cleaner(wet & dry) 32L
Cordless Cleaner
Cordless Cleaner
Buit inJob Light
Buit inJob Light
Buit inJob Light
Buit inJob Light(DCL501 only)
CL104DPage 14
CL111DPage 15
with Cooling fanFAST CHARGING
WELL BALANCED COOLING
The charging time in practical condition
OPTIMUM CHARGING SYSTEM
Unbalanced Cooling Without coolingCompetiter A Competiter B
Temperature
High
Low
Enclosed
The design which air flows efficiently overall and it can cool cell evenly and rapidly.Well-balanced cooling system prevents the load only to a part of cell and makes battery life longer.
34min
Competitor A
MAKITA
Total Total60min 10min
Out of air flow
Battery Cell
In case that the battery that became 70 degrees C right after use is charged in the environment of 25 degrees C.
It is necessary to cool down the battery before you begin to charge it when you charge the battery, which is the high temperature after use. MAKITA developed the original charger system; Built-in the cooling fan. The stand-by time until the charge starts is greatly shortened by cooling efficiently. In addition, the charger keeps cooling while charging it, and the rapid charge is achieved.
Air InletAir Outlet
Cooling fan
MAKITA’sOptimum Air flow
Traditional Charging Method
min
Optimum Charging
min
EXTREME STAMINA
Voltage
Temperature
CurrentWELL BALANCED CHARGING
LIFE TIME WORK VOLUME
TOTAL POWER DELIVERY AMOUNT OF EACH BATTERY'S SERVICE LIFETIME
The charger communicates with the individual cell in battery and then it controls current, voltage, and temperature. The both rapid and optimum charge was achieved. It made battery life longer.
Competitor A : Capacity Unbalanced Battery Pack
MAKITA: Capacity Balanced Battery Pack
1.Full Charged 2.Discharging
1.Full Charged 2.Discharging
1. Competitor charging system causes to decrease the capacity of the cell, which weakened by the heavy load work because Competitors do not install an optimum charge.
2. Discharge stops by using the capacity of the weakened cell completely, when you use the power tool in the condition, noted as above.
Therefore the capacities of other cells are not used completely, so that workloads are decreased
at a charge.
1. It is designed that an individual cell whose condition is full, discharge, empty works well.
It is hard to become the over-discharge and an overcharge because the individual cell
capacity prevent to anomalies.2. It is possible to use it efficiency because the
capacity of each cell is not uneven and discharge evenly.
430%430%
430570
710
130
100
Li-ion 3.0AhLi-ion 4.0AhLi-ion 5.0Ah
850Li-ion 6.0Ah
Ni-MH 2.8Ah
Ni-Cd 1.9Ah
The numbers in the chart are relative values when the amount of Ni-cd 1.9Ah is indexed at 100.
Built-in-CPUThe built-in CPU in battery records the battery usage history and transmits it to the charger.
Truyền dữ liệu bằng sốDigital Communication
Built-in CPUThe CPU built in the charger analyzes its condition; high temperature, re-charge after full charged, over-discharging. The battery lasts long life because it can be charged at the best method and time.
22 min
70min
18VLithium-ion
64
L I - I O N B AT T E R Y & C H A R G E R T I M E R E F E R E N C E , C O M PAT I B I L I T Y C H A R T
For model
22min
BL1830B(197599-5)
with Battery fuel gauge
36min
45min
24min
Fast Charging
60min
90min
110min
45min
30min
15min
3.0Ah
4.0Ah
5.0Ah
2.0Ah
1.5Ah
BL1815N(196449-1)
BL1850B(197280-8)
with Battery fuel gauge
BL1840B(197265-4)
with Battery fuel gauge
BL1820B(197254-9)
with Battery fuel gauge
Fast Charging
45min
90min
1 - 2 batteries
3 - 4 batteries
60min
120min
1 - 2 batteries
3 - 4 batteries
90min
180min
1 - 2 batteries
3 - 4 batteries
110min
220min
1 - 2 batteries
3 - 4 batteries
30min
60min
1 - 2 batteries
3 - 4 batteries
DC18SE
DC18SF(196426-3)
DC18RC(195584-2)
DC18RE(198444-7)
DC18RD(196933-6)
DC18SD(194534-4)
(194621-9)
Fast Charging
Fast Charging
55min
Fast Charging
Fast Charging
(Automotive)
130min
6.0Ah
BL1860B(197422-4)
with Battery fuel gauge
130min
260min
1 - 2 batteries
3 - 4 batteries
DRC200
DVC260
DVC860L
DVC861L
DVC862L
DVC863L
DCL500
DCL501
DCL180
DCL182
(For both18V & 12V max)
2,940,000 VND
2,350,000 VND
1,960,000 VND
1,530,000 VND
1,430,000 VND
1,400,000 VND
2,170,000 VND
3,250,000 VND
2,750,000 VND 4,710,000 VND
1,690,000 VND
2,170,000 VND
The prices shown above are reference retail prices
(P. 6 & 7)
(P. 8 & 9)
(P. 10)
(P. 10)
(P. 11)
(P. 11)
(P. 12 & 13)
(P. 12 & 13)
(P. 15)
(P. 14)
3.0Ah
2.0Ah
4.0Ah
12V maxLithium-ion
65
L I - I O N B AT T E R Y & C H A R G E R T I M E R E F E R E N C E , C O M PAT I B I L I T Y C H A R T
For model
10.8VLithium-ion
For model
DC10SB (197363-4)
DC18RE (198444-7) DC10WD
(197343-0)
130min
60min
Fast Charging
70min
30min
5.0Ah
5.0Ah
4.0Ah
50min
22min1.5
Ah
CL106FD
CL107FD Fast Charging
Fast Charging
BL1021B(197396-9)
with Battery fuel gauge
BL1016(197393-5)
BL1041B(197406-2)
with Battery fuel gauge
180min
1.5Ah
CL104D
CL111D632C23-4(Lithum-ion buit in battery) DC1001
(196829-1)
MAKPAC Power source kit
(197629-2)
(197624-2)
(197494-9)
(197952-5)
MKP3PT182
MKP1RT182
MKP1RM182
MKP1RF182
BL1850B
BL1850B
BL1840B
BL1830B
Model No. Image Battery Charger
DC18RD
DC18RC
DC18RC
DC18RC
MKP1RF182
FOR Z MODELS (18V) NEED TO BUY BATTERIES AND CHARGERS - MAKPAC POWER SOURCE KITS ARE OPTIMUM CHOICES
(For both18V & 12V max)
(comes with tool)
7,930,000 VND
6,850,000 VND
6,070,000 VND
5,220,000 VND
1,290,000 VND
910,000 VND
760,000 VND
2,750,000 VND 1,280,000 VND 1,020,000 VND
The prices shown above are reference retail prices
(P. 15)
(P. 14)
(P. 14)
(P. 15)Charger
About two and a half tennis courts
66
Pattern cleaning mode
For cleaning wide spaces with few obstacles. (Ex.) well-organized warehouses, long corridors, etc.
Random cleaning mode
For cleaning locations with many obstacles. (Ex.) offices, etc.
The sensor memorize the aisle
enables user to define a cleaning area by putting boundary tape on the floor as boundary line that the cleaner cannot pass.
The sensor memorize the aisle
Get to know the aisle areaCleaning area
Area outside the defined cleaning area
Selectable two dust collection modes Cleaning area setting function
WAREHOUSECleaning area setting function
With two 18V batteries, able to clean large area(Alternately using the power of each battery)[Also able to run with a single battery]
Continuous run time on a single full battery charge =120
about
about
200 min1 time
min1 time
When the vacuum fan off, continuous run time will incarease 2 times“Power brush only” mode for collecting large debris only
2 batteries 5.0Ah
2 batteries 3.0AhAbout 500m² (BL1850B x 2 [5.0Ah])About 300m² (BL1830B x 2 [3.0Ah])
Audio signal when charging is completed
Li-ion
BL1830B
BL1850B5.0Ah - 45 min3.0Ah - 22 min
Can be used for smartphone (USB port)
Two port multi fast chargerDC18RD
Li-ion batteries
Robotic cleanerDRC200Z
R O B O T I C C L E A N E R
Robotic cleaner
Continuous useCleaning area Max running speedDust box capacity DimensionsNet weightDRC200Z: Without battery and charger
200 min (BL1850B x 2)500 m² (BL1850B x 2)0.3 m/ sec2.5 L460x460x180mm7.3 kg
DRC200Z18V
Standard equipment: Wireless remote controller,side brushs(4 pcs), boundary line tape.
MAKPAC POWER SOURCE KITMODEL
DRC200Z
PRICE/SET
30,600,000 VND
29,520,000 VND
28,740,000 VND
27,890,000 VND
22,670,000 VND
7,930,000 VND
6,850,000 VND
6,070,000 VND
5,220,000 VND
(Fast charger DC18RD, BL1850B x 2)
(Fast charger DC18RC, BL1850B x 2)
(Fast charger DC18RC, BL1840B x 2)
(Fast charger DC18RC, BL1830B x 2)
197629-2
197624-2
197494-9
197952-5
The prices shown above are reference retail prices
67
Equipped with a highly efficient filter that features the same quality as the filter of Makita vacuum cleaners has.
Dust box with 2.5L capacityLarge side brushes + Large power brush
「2層」Dual compartment structure - one for small debris, the other for large debris - is ideal for commercial use.
Side brushes Enable to clean alongside walls, around obstacles or tight corners in either of pattern/ random.
ø50mm x 260mm Large power rotating brush
Excellent cleaning features useful in commercial applications
Small debris
Large debris
Leading on large dust volume capacity
Office Factory Store
Easy maintenance
Filter/Dust box:Washable wholly in water
Dust box:Attachable/ detachablefrom the top of the cleaner
Power brush:Detachable and Water-washable
Main features
Wireless remote controller
Increases 2 times when fan turns offMode for collecting large debris only
Continuous use (with 2 batteries):BL1830B (3.0Ah) : 120 minBL1850B (5.0Ah) : 200 min
Dust box capacity : 2.5LDimensions: 460x460x180mm
Net weight : 7.3kg
Automatic cleaning with selectable 2 running modes and cleaning area setting function
R O B O T I C C L E A N E R
Vacuum fan sucks up small debris into upper compartment.
Battery indicators
On-timer button
Mode button
Enables automatic on at 1, 3 or 5 hours
for selecting Random/ Pattern mode
for turning on/ off boundary sensor
Buzzer buttonThree levels of buzzer volume
including mute can be selected
Vacuum button
Start/ Stop button
Boundary sensor button
R O B O T I C C L E A N E R
Accessories
Part No.
SH00000240Part No.
SH00000065Part No.
SH00000063Part No.
SH00000064Part No.
SH00000213
Boundaryline tape
Side brushes (2 pcs/set) Power brush Turn brush cover Filter
• For finding the location of the cleaner after cleaning is finished (The cleaner will indicate its location with buzzer and LED light each time you push a button on Wireless remote controller.)
C O R D L E S S B A C K PA C K VA C U U M C L E A N E R68
Cordless Backpack Vacuum CleanerDVC260Z/DVC260ZX5/DVC260ZX
Longrun timeLongrun time
60/90 min60/90 min
Light andcomfortableLight andcomfortable
3,8 kg3,8 kg
High suction powerHigh suction power
45/25W45/25W
Powered by two18V Li-ion batteries in series Powered by two18V Li-ion batteries in series
Suction powerCapacity Continuous use
Max air flow Max sealed suctionSound pressure levelDimensionsNet weight
DVC260Z: DVC260ZX5:
High / Low: 45 / 25 W2.0 LHigh / Low: 60 /90 min(BL1850B x 2)1.5 m³/min7.1 kPa70 dB230x152x373mm3.8 kg
High / Low: 45 / 25 W2.0 LHigh / Low: 60 /90 min(BL1850B x 2)1.5 m³/min7.1 kPa70 dB230x152x373mm3.8 kg
DVC260Z/DVC260ZX5 DVC260ZX
Hose, straight pipe, nozzle assembly, flexible rubber nozzle, joint, paper dustbag (10 pcs - only DVC260ZX5).
Hose, front cuffs, joint.(Nozzle assembly does not come with tool).
18Vx2
Without battery and chargerWithout battery and charger
DVC260ZX: Without battery and charger
Standard equipment:
DVC260ZX5Paper dust bag (10 pcs/set)
Cordless Backpack Vacuum Cleaner
MAKPAC POWER SOURCE KITMODEL PRICE/SET
DVC260Z
DVC260ZX5
DVC260ZX
15,830,000 VND
14,750,000 VND
13,970,000 VND
13,120,000 VND
16,240,000 VND
15,160,000 VND
14,380,000 VND
13,530,000 VND
15,710,000 VND
14,630,000 VND
13,850,000 VND
13,000,000 VND
High I Low High I Low
(Fast charger DC18RD, BL1850B x 2)
(Fast charger DC18RC, BL1850B x 2)
(Fast charger DC18RC, BL1840B x 2)
(Fast charger DC18RC, BL1830B x 2)
(Fast charger DC18RD, BL1850B x 2)
(Fast charger DC18RC, BL1850B x 2)
(Fast charger DC18RC, BL1840B x 2)
(Fast charger DC18RC, BL1830B x 2)
(Fast charger DC18RD, BL1850B x 2)
(Fast charger DC18RC, BL1850B x 2)
(Fast charger DC18RC, BL1840B x 2)
(Fast charger DC18RC, BL1830B x 2)
197629-2 : 7,930,000 VND
197624-2 : 6,850,000 VND
197494-9 : 6,070,000 VND
197952-5 : 5,220,000 VND
197629-2 : 7,930,000 VND
197624-2 : 6,850,000 VND
197494-9 : 6,070,000 VND
197952-5 : 5,220,000 VND
197629-2 : 7,930,000 VND
197624-2 : 6,850,000 VND
197494-9 : 6,070,000 VND
197952-5 : 5,220,000 VND
7,900,000 VND
8,310,000 VND
7,780,000 VND
The prices shown above are reference retail prices
Usage compatibility at canteen, window,stairs, cinema
69
C O R D L E S S B A C K PA C K VA C U U M C L E A N E R
Able to capture 99.97% of particles as small as 0.3-1μm
High/ Lowpower selectionON-OFF switchfor LED job light
LED job lightconvenient for operation in dark job sites
Controller
Comfortable harness
Smooth & flexibility
HEPA filteris used as the main filter to capturevery fine particles effectively OFF switch
The weight of tool body is removed from user's wrist and hand, enabling Easy corner-to-corner cleaning for longer time with less fatigue.
featuring shoulder and waist belts adjustable to suit user’s size for less fatigue even after long continuous operation
DVC260ZX: Nozzle assembly does not come with tool. Specially connects to hand tools.
Part No.
123636-9
Accessories
HEPA filterBending pipe
Anchor nozzle setHose band
Flexible rubber nozzle
Dust bag
Nozzle assemblyPart No.Dry / WetType
Part No.ColorType
Mã phụ kiệnMàu sắcLoại
198184-7195551-7195549-4195550-9A-47846
DryDry / Wet
DryWetWet
Flooring & carpetUniversal typeCompact type ACompact type BWide type
Flooring & carpet
Lau, dọn thảm
Standard
For rug / carpet cleaning
DXSFor rug / carpetcleaning
WhiteIvoryBlueRed
BlackWhiteIvoryRedIvoryBlueRed
BlackWhite
A-61335197032-7198523-1197033-5197563-6197035-1A-37546A-52504122861-9122859-6123489-6123539-7123486-2
Univeral type
Shelf brushPart No.
191724-0198534-6A-52510198536-2198872-6
Color
IvoryBlueRed
BlackWhite
Round brush Part No.
A-37471198549-3A-52532198551-6198877-6
Color
IvoryBlueRed
BlackWhite
Part No.
123677-5
Part No.
166116-2
Part No.
197781-6
Part No.
197898-5
Part No.
192236-6Hose(28mm)
Length
143787-2152992-0A-34235195437-5195433-3195436-7A-34229
Part No.
1.0m1.5m1.5m2.5m3.5m5.0m5.0m
Paper dust bag
Flexible hose
Straight pipe
Sash nozzle
Front cuffs & Joint
Part No.
197902-0
Per pkg
10
Type
Front cuffs 22Front cuffs 24Front cuffs 38Joint 22-38
Part No.
195547-8195546-0195545-2195548-6
Part No.
A-37568198541-9A-52526198543-5198867-9
Color
IvoryBlueRed
BlackWhite
Part No.
416041-0451243-1416225-0456586-6451240-7
Color
IvoryBlueRed
BlackWhite
Part No.
451424-7451244-9451425-5456587-4451241-5123584-2*
Color
IvoryBlueRed
BlackWhiteWhite* Can be extended
Suction power(W)
Net weightBL1815N/20B x 2 (kg)
Capacity(L)
Max air flow(m³/min)
Max sealed suction (kPA)
Hepa filterContinuous useBL1850B x 2 (min)
C O R D E D A N D C O R D L E S S VA C U U M C L E A N E R610
Corded and Cordless Vacuum CleanerDVC860LZ/DVC861LZ
For wet cleaning, only need to replace the filter for waterWet and dry cleaning
DCHigh versatility
High power
Able to capture99.97%
of particles as small as
0.3-1µm(For dry cleaning only:DVC863L & DVC861L)
DVC863L/DVC863LZX
DVC860L
DVC861L
DVC862L
AC / DC:320 / 25 - 70
AC / DC:320 / 25 - 70
DC only:90
DC only:90
8
8
8
8
40
40
65
65
7.0
7.7
8.6
9.3
AC / DC:3.6 / 2.1
AC / DC:3.6 / 2.1
DC only:2.1
DC only:2.1
AC / DC:24 / 9.0
AC / DC:24 / 9.0
DC only:9.8
DC only:9.8
ACSuction power
320W
Versat i le use thanks to using the AC andDC (two 18V Li- ion batter ies)
Suction powerCapacityContinuous useMax air flowMax sealed suctionSound power levelDimensionsNet weight
DVC860LZ:
AC / DC: 320W / 25-70WDust / Water : 8L / 6L65 min (BL1850B x 2)AC / DC: 3.6 / 2.1 m³ /minAC / DC: 24 / 9.0 kPa 75 dB366x334x368mm 8.6kg ( BL1815N/BL1820B x 2)
DVC860LZ
Hose 38mm, straight pipe, bending pipe, joint, nozzle assembly, corner nozzle, poly bag set(10 pcs).
18Vx2
Without battary and charger
AC / DC: 320 / 25 - 70WDust : 8L65 min (BL1850B x 2)AC / DC: 3.6 / 2.1 m³/minAC / DC: 24 / 9.0 kPa75 dB366x334x368mm9.3 kg (BL1815N/BL1820B x 2)
DVC861LZ
Hose 28mm & 38mm, straight pipe, bending pipe, corner nozzle,nozzle assembly, joint, Hepa filter, poly bag set(10 pcs).
DVC861LZ: Without battary and chargerStandard equipment:
Corded and Cordless Vacuum Cleaner
MAKPAC POWER SOURCE KITMODEL PRICE/SET
DVC860LZ
DVC861LZ
20,860,000 VND
19,780,000 VND
19,000,000 VND
18,150,000 VND
24,550,000 VND
23,470,000 VND
22,690,000 VND
21,840,000 VND
12,930,000 VND
16,620,000 VND
(Fast charger DC18RD, BL1850B x 2)
(Fast charger DC18RC, BL1850B x 2)
(Fast charger DC18RC, BL1840B x 2)
(Fast charger DC18RC, BL1830B x 2)
(Fast charger DC18RD, BL1850B x 2)
(Fast charger DC18RC, BL1850B x 2)
(Fast charger DC18RC, BL1840B x 2)
(Fast charger DC18RC, L1830B x 2)
197629-2 : 7,930,000 VND
197624-2 : 6,850,000 VND
197494-9 : 6,070,000 VND
197952-5 : 5,220,000 VND
197629-2 : 7,930,000 VND
197624-2 : 6,850,000 VND
197494-9 : 6,070,000 VND
197952-5 : 5,220,000 VND
The prices shown above are reference retail prices
Wet and dry Dry only
611
C O R D L E S S VA C U U M C L E A N E R
Variable suction power control by dial
Large on-off switch
prevents the vacuum cleaner from moving unintentionally during use with power tool orintermission of operation.
Caster stopper(on the two rear casters)
allows for storing the accessories and batteries.
Suction powerCapacityContinuous useMax air flowMax sealed suctionSound power levelDimensionsNet weight
90WDust / Water : 8 / 6L40 min (BL1850B x 2)2.1 m³/ min9.8 kPa70 dB366x334x368mm7.0kg (BL1815N/BL1820B x 2)
DVC862LRT2/DVC862LZ
Hose 38mm, straight pipe, bending pipe, Nozzle assembly,corner nozzle, joint,poly bag set (10 pcs).
18Vx2
DVC862LRT2:DVC862LZ:
Fast charger, BL1850B x 2Without battery and charger
DVC863LRT2/DVC863LZ
Hose 28mm & 38mm, straight pipe, bending pipe, nozzle assembly, corner nozzle,joint, Hepa filter, poly bag set (10 pcs).
DVC863LRT2:DVC863LZ:
Fast charger, BL1850B x 2Without battery and charger
Standard equipment:
CordlessVacuum Cleaner
Removable storage box
Cordless Vacuum Cleaner DVC862LRT2/DVC862LZDVC863LRT2/DVC863LZ/DVC863LZX
COMPACT DESIGN POWERFUL SUCTION POWER
Without batteries and charger
90WBụi : 8L40 min (BL1850B x 2)2.1 m³/min9.8 kPa70 dB366x334x368mm7.7kg (BL1815N/BL1820B x 2)
90WBụi : 8L40 min (BL1850B x 2)2.1 m³/min9.8 kPa70 dB366x334x368mm7.7kg (BL1815N/BL1820B x 2)
DVC863LZX
Hose, joint, poly bag set (10 pcs).
DVC863LZX:(Nozzle assembly does not come with tool)
Suction power is variably adjustable to suit application or continuous rating input of connected power tool.
• Allows for easy on/off switching.• Functions only when Main power switch is on to prevent accidental switch-on during transportation, etc.
Indicates the power remainingin each battery individuallyin 3 stages with 3 LEDs.
Protects wall and furniture surfacesfrom scratches/damage.
Large bumper
Dual battery fuel gauge
Protects batteries fromdripping water.
Battery cover
MAKPAC POWER SOURCE KITMODEL PRICE/SET
DVC862LZ
DVC863LZ
DVC863LZX
DVC862LRT2 : 15,940,000 VNDDVC863LRT2 : 17,800,000 VND
17,340,000 VND
16,260,000 VND
15,480,000 VND
14,630,000 VND
19,320,000 VND
18,240,000 VND
17,460,000 VND
16,610,000 VND
18,170,000 VND
17,090,000 VND
16,310,000 VND
15,460,000 VND
9,410,000 VND
11,390,000 VND
10,240,000 VND
(Fast charger DC18RD, BL1850B x 2)
(Fast charger DC18RC, BL1850B x 2)
(Fast charger DC18RC, BL1840B x 2)
(Fast charger DC18RC, BL1830B x 2)
(Fast charger DC18RD, BL1850B x 2)
(Fast charger DC18RC, BL1850B x 2)
(Fast charger DC18RC, BL1840B x 2)
(Fast charger DC18RC, BL1830B x 2)
(Fast charger DC18RD, BL1850B x 2)
(Fast charger DC18RC, BL1850B x 2)
(Fast charger DC18RC, BL1840B x 2)
(Fast charger DC18RC, BL1830B x 2)
197629-2 : 7,930,000 VND
197624-2 : 6,850,000 VND
197494-9 : 6,070,000 VND
197952-5 : 5,220,000 VND
197629-2 : 7,930,000 VND
197624-2 : 6,850,000 VND
197494-9 : 6,070,000 VND
197952-5 : 5,220,000 VND
197629-2 : 7,930,000 VND
197624-2 : 6,850,000 VND
197494-9 : 6,070,000 VND
197952-5 : 5,220,000 VND
The prices shown above are reference retail prices
Dry onlyWet and dry
Holder set 10-33
Accessories
Hose
Straight pipe
Damper set
Poly bag set
Filter bag set (5 pcs/set)
HEPA filter Prefilter Cloth filter Filter set (for water)
Bending pipe
Corner nozzle
Nozzle assembly
Part No.
197166-6
Part No.
195555-9
Part No.
195553-3
Part No.
140248-3
Part No.
192563-1
Part No.
195432-5
Per pkg
10
Part No.
192562-3
Part No.
195544-4
Part No.
195552-5
Part No.
195557-5
Part No.
410306-2
Part No.Dry / WetType198184-7
195551-7
195549-4
195550-9
A-47846
Dry
Dry / Wet
Dry
Wet
Wet
Flooring & carpet
Universal Type
Compact Type (A)
Compact Type (B)
Wide Type
Part No.Size LengthA-34235
195437-5
195433-3
195436-7
A-34229
195434-1
195435-9
28mm
28mm
28mm
28mm
28mm
38mm
38mm
1.5m
2.5m
3.5m
5.0m
5.0m
2.5m
5.0m
Univeral type
Font cuffs 22
Font cuffs 24
Font cuffs 38
Joint 22-38
Part No.Type
195547-8
195546-0
195545-2
195548-6
Front cuffs and jointFront cuffs 22
Front cuffs 24
Front cuffs 38
C O R D L E S S C Y C L O N E C L E A N E R612
Cordless Cyclone CleanerDCL501Z/DCL500Z
LONG LASTING POWERFUL SUCTION
Net weight
3.6kg
DCL500Z
HEPA CLEANFilter
HEPAFilter
Continuoususe
16/40minHigh I Low
With BL1840B With BL1840B
Net weight
3.1kg
DCL501ZContinuous
use
23/51minHigh I Low
With BL1815N With BL1815N
Zoom pipe(Telescopic pipe)Can be extended to allow for grip height adjustment to suit user’ s height.Suction power
High I Low75/25 W
Max sealed suction
6.6 kPa
High / Low Power selection
613
C O R D L E S S C Y C L O N E C L E A N E R
Achieved by using BL motor (DCL501Z only)
• Dust cup can be removed for easy dust disposal simply by pulling up the cup release lever then by pushing the release button
• The dust cup and the filter are washable in water
Dust cup
Long lasting powerful suction
Easy dust disposal
Long run time and lightweight cleaner design
Filter cleaning lever
After every use, simply move the lever side to side to remove dust from the filter.
1. Orange LED indicator for filter cleaning warning2. Red LED indicator for battery capacity warning
Shoulder beltfor comfortable
operation
Cyclonic system separates large dust particles from fine dust particles so that only fine dust particles are captured on the filter to reduce clogging for longer powerful suction
HEPA filter: 99.97% or more collection efficiency of airborne particle 0.3μm (DCL501Z only)
Exhaust emissions are extremely clean with HEPA CLEAN (DCL500Z only)
Zoom pipe(Can be extended)
Nozzle assembly Crevice nozzle
Part No.
SH00000034Part No.
SH00000060Part No.
SH00000058Part No.
SH00000042
AccessoriesHose
Suction powerCapacityContinuous use
Max air flowMax sealed suctionSound power levelDimensionsNet weight
High / Low:75/25W250mLWith BL1840B:High / Low: 16 / 40 min1.3m³/min6.6kPa64 dB 352x189x252mm3.6kg
High / Low:75/25W250mLWith BL1840B:High / Low: 23 / 51 min1.3 m³/min6.6kPa -352x189x252mm3.1kg
DCL500Z DCL501Z
Nozzle assembly, hose, zoom pipe, shoulder belt, cleaning brush.
Nozzle assembly, hose, zoom pipe, shoulder belt, cleaning brush.
DCL500Z: Without battery and charger DCL501Z: Without battery and chargerStandard equipment:
Cordless Cyclone Cleaner
18V
BATTERY CHARGERMODEL PRICE/SET14,890,000 VND
14,500,000 VND
14,070,000 VND
14,890,000 VND
14,500,000 VND
14,070,000 VND
DCL500Z
DCL501Z
10,370,000 VND
10,370,000 VND
Fast charger DC18RC (195584-2) : 2,170,000 VND
BL1850B (197280-8) : 2,350,000 VND
BL1840B (197265-4) : 1,960,000 VND
BL1830B (197599-5) : 1,530,000 VNDBL1850B (197280-8) : 2,350,000 VND
Pin BL1840B (197265-4) : 1,960,000 VND
BL1830B (197599-5) : 1,530,000 VND
The prices shown above are reference retail prices
DCL500HEPA CLEANfilter
DCL501HEPAfilter
Part No.
SH00000027SH00000286
DCL500DCL501
For model
C O R D L E S S C L E A N E R S E R I E S
614
PAPER DUST BAG
phút
CORDLESS CLEANER DCL182
CORDLESS CLEANER CL107FD
Standard equipment: Nozzle assembly, sash nozzle, dust bag, paper dust bag(5 pcs).
CORDLESS CLEANER CL104D
Standard equipment: Charger DC1001, nozzle assembly, sash nozzle, straight pipe, dust bag, paper dust bag (5 pcs).
CL104DWY CL104DWYXCL104DWR
Nozzle assembly, sash nozzle, high-classdust bag, paper dust bag (10 pcs).
Standard equipment: Standard equipment: Nozzle assembly, Sash nozzle, dust bag, paper dust bag (5 pcs).
PAPER DUST BAGNEW-FRONT COVERSimply by pushing a button,the front cover is opened.Standard equipment: 5 paper dust bags and 1 cloth dust bag.
Easy to use.
5LED LAMP FOR WARRNING
Red LED indicator for battery capacity warning.
ONE TOUCH SWITCHFor continous operation.
Built inJob light
CL107FDSYW
CL107FDZW
Without battery and charger
BL1016 x 1(1.5Ah)
Fast charger DC10SB
Charging time22 min
CL107FDSY
CL107FDZ
Without battery and charger
BL1016 x 1(1.5Ah)
Fast chargerDC10SB
Charging time22 min
Built inJob light
DCL182FRFW
Built inJob light
Fast chargerDC18RC
Charging time22 min
BL1830B x 1 (3.0Ah)
DCL182SY
DCL182Z
Without battery and charger
BL1815N x 1 (1.5Ah)
ChargerDC18SD
Charging time30 min
DCL182SYB
DCL182ZB
Without battery and charger
BL1815N x 1 (1.5Ah)
ChargerDC18SD
Charging time30 min
DCL182SYW
DCL182ZW
Without battery and charger
BL1815N x 1 (1.5Ah)
ChargerDC18SD
Charging time30 min
10.8v Lithium-ionbuit in batteryCharging time:180 min
STRONG SUCTION
T-NOZZLE ENHANCED MANEUVERABILITY ANGLED SUCTION PORT DUST FILTER
Keep dust inside capsule.
POWER BY LITHIUM-ION BATTERYOne battery can use for many other cordless tools.
ANYTIMECHARGE
LONGTIMESTORANGE
COMPACT/LIGHT WEIGHT
Profesional strong motors supply strong suction satisfy variety uses: family, profesional cleaning, job site.
Easy to clean up tight places such as beneath sofas.
Long angled suction port allow for easy to clean without nozzle.
Accessories
For model:CL106FD, DCL180, CL111D
For model:CL104D, CL107FD, DCL182F, DCL182
Part No.451208-3
Price77,000 VND
Part No. Qt Price194566-1194565-3
5 pcs 10 pcs
Part No. Qt443060-3A-50728
1 pc10 pcs
PAPER DUST BAG FILTER SET PREFILTER SET
For model: CL106FD, DCL180, Cl111DPart No. 198752-6
HIGH FUNCTION FILTER SET:
2,180,000 VND
3,130,000 VND 3,130,000 VND
1,320,000 VND 1,320,000 VND
4,900,000 VND 4,300,000 VND 4,300,000 VND 4,300,000 VND
1,300,000 VND 1,300,000 VND 1,300,000 VND
69,000 VND134,000 VND
Price20,000 VND169,000 VND
129,000 VND
The prices shown above are reference retail prices
CLEAN EXHAUST AIR
High function dust bag (comes with cleaner)
For model:CL104D, CL107FD, DCL182F, DCL182
DUST BAG
Part No.166084-9
Price56,000 VND
VALVE STAY COMPLETE:
HIGH FUNCTION DUST BAG
Part No. A-58257132,000 VND
Part No. 143677-936,000 VND
Continuous use
Net weight
Powerful I Strong I Standard
about 8/12/23 min
1.0 kg
Capacity
500 mL330mL Paper dust bag
23/14/5WDust bag (standard equipment)
Suction power
Powerful I Strong I Standard
Net weight
1.1 kg
Capacity
500 mL
Continuous use
(BL1016)
330mL Paper dust bag
about 10/12/25 min
Powerful I Strong I Standard
Suction power
32/20/5WPowerful I Strong I Standard
Dust bag (standard equipment)
(BL1830B)
Continuous use
about 20/40 min
Net weight
1.5 kg
Capacity
500 mL330mL Paper dust bag
37/10WSuction power
With high function dust bag
42/15WWith dust bag(Strong I Standard)
Strong I Standard
615
C O R D L E S S C L E A N E R S E R I E S
Standard equipment: Nozzle assembly, sash nozzle, filter set, prefilter.
CORDLESS CLEANER
DCL180SY DCL180SYB DCL180SYW
DCL180ZWDCL180ZBDCL180Z
Có �èn
Standard equipment: Nozzle assembly, sash nozzle, filter set, prefilter set.
CORDLESS CLEANER CL106FD
DCL180
Nozzle assembly, sash nozzle, high-class filter set.
Standard equipment:
CAPSULE STYLE
CL106FDSYW
BL1016 x 1(1.5Ah)
Fast chargerDC10SB
Charging time22 min
CL106FDZW
Without battery and charger
Without battery and charger Without battery and charger Without battery and charger
Built inJob light
Built inJob light
CL106FDSY
CL106FDZ
Without battery and charger
BL1016 x 1(1.5Ah)
Fast charger DC10SB
Charging time22 min
BL1815N x 1 (1.5Ah)
ChargerDC18SD
Charging time 30 min
BL1815N x 1 (1.5Ah)
ChargerDC18SD
Charging time30 min
BL1815N x 1 (1.5Ah)
ChargerDC18SD
Charging time30 min
CAPSULE STYLE
TRIGGER SWITCH
Turn and open to dispose of dust.
On/ Off quicky.Save battery power.
VARIETY USES : FAMILY, PROFESSIONAL CLEANING JOB SITE
CORDLESS CLEANER CL111D
Standard equipment: Charger DC1001, Nozzle assembly, sash nozzle, straight pipe.
CL111DWI
10.8v Lithium-ionbuit in batteryCharging time:180 min
CL111DWR
3,080,000 VND
2,840,000 VND 2,840,000 VND
1,010,000 VND 1,010,000 VND
DCL180FRFW
Built inJob light
Fast chargerDC18RC
Charging time22 min
BL1830B x 1(3.0Ah)
4,570,000 VND 3,970,000 VND 3,970,000 VND 3,970,000 VND
960,000 VND 960,000 VND 960,000 VND
CLEAN EXHAUST AIR
High functionfilter set (comes with cleaner)
Accessories Flexible
Shelf brush
Part No.ColorIvoryBlueRed
BlackWhite
191724-0198534-6A-52510198536-2198872-6
Part No.ColorIvoryBlueRed
BlackWhite
A-37568198541-9A-52526198543-5198867-9
Nozzle assembly
Image Type Color Part No. Price
Flooring & carpet
Flooring & carpet
A-61335
197032-7198523-1197033-5197563-6197035-1A-37546A-52504122861-9122859-6123489-6123539-7123486-2
White
IvoryBlueRed
BlackWhiteIvoryRedIvoryBlueRed
BlackWhite
DXSFor rug / carpet cleaning
For rug / carpet cleaning
Standard
193,000 VND
Part No.ColorIvoryBlueRed
BlackWhite
A-37471198549-3A-52532198551-6198877-6
Round brush120,000 VND137,000 VND
Part No.ColorIvoryBlueRed
BlackWhite
416041-0451243-1416225-0456586-6451240-7
Sash nozzle19,000 VND
571,000 VND
344,000 VND
332,000 VND
154,000 VND
The prices shown above are reference retail prices
Straight pipe
Color Part No.
ChargerFor model:CL104D, CL111D)
BatteryFor model:CL104D, CL111D)
Charging time Part No180 min DC1001(196829-1)
49,000 VND
451424-7451244-9451425-5456587-4451241-5
IvoryBlueRed
BlackWhite
Net weight
Continuous use
Capacity
0.93 kg
560 mL
about 10 min
21WFilter (standard equipment)
Suction power
Net weight
Continuous useabout 16 min
(BL1016)
Capacity
0.98 kg
600 mL
19WFilter (standard equipment)
Suction power
Net weight
Capacity
1.4 kg
650 mL
Continuous useabout 20 min
(BL1830B)
37WSuction power
With high function filter set
42WWith filter
Wet & Dry vacuum cleaners approved for Dust class L
Powder filter
Prefilter
Damper
When the power is switched on,Prefilter collapses into itself tocompress Damper, and fits closelyover Damper and Powder filter.
When the power is switched off,Damper expands back to its original size and shakes off dustfrom Prefilter automatically withits expanding power
VC3210LX132L
Wet & dryVC2510LX1
25LWet & dry
Constantly Strong SuctionAutomatic self-cleaning filterObtained by triple filter structure composed of: Powder filter + Damper + Prefilter
VA C U U M C L E A N E R616
Vacuum Cleaner (Wet & Dry)VC1310LX1/ VC2510LX1/ VC3210LX1
Only need to install the water filter for wet cleaningSimple connection to Makita power tools
Dust class L: density > 0.1mg/m³, inherent in offices, warehouses, such as: hair, industrial dust, small debris...
Allows for:Constantly high suction power.Easy filter cleaning simply by tapping dust off of prefilter. Quiet cleaning because damper and prefilter make no noise.
These newvacuum cleaners
can be connected toa variety of Makita power tools simply by attaching only an appropriate front cuffs
to the power toolend of hose
VC1310LX113L
Wet & dry
Hose Front cuffs Power supply cord Pipe and nozzle
Simple connection
Large capacity of on-board storage
Vacuum cleaner (VC1310LX1,VC2510LX1,VC3210LX1) turn on or off automatically when connected power tool is turned on or off
Suction power is variably adjustable to suit application or continuous ratinginput of connected power tool.
prevent the vacuum cleaner from moving unintentionally during use with power tool orintermission of operation.
- Quick and easy dust disposal- Lower-running cost comparedwith paper dust bag
Compatible with commercially available plastic bags, allowing for:
Caster stopper
Variable suction power control by dial
Pipe holder OnlyVC1310L
617
VA C U U M C L E A N E R
PowerMax air flowMax sealed suctionTank capacity
DimensionsNet weightPower supply cord
1,050W2.0m³ / min22.0kPaDust: 13LWater: 7L366x334x420mm 9.6kg5.0m
1,050W2.0m³ / min22.0kPaDust: 25LWater: 14L432x416x451mm10.5kg 5.0m
VC1310LX1 VC2510LX1
1,050W2.0m³ / min22.0kPaDust: 32LWater: 27L552x398x685mm14.5kg5.0m
VC3210LX1
Hose (28mm & 38mm), Nozzle assembly, corner nozzle, bending pipe, straight pipe, front cuffs, poly dust bag (10 pcs).
Hose (28mm & 38mm), Nozzle assembly, corner nozzle, bending pipe, straight pipe, front cuffs, poly dust bag (10 pcs).
Hose (28mm & 38mm), Nozzle assembly, corner nozzle, bending pipe, straight pipe, front cuffs, poly dust bag (10 pcs).
Standard equipment:
Vacuum Cleaner(Wet & Dry)
8,680,000 VND 9,460,000 VND 11,030,000 VND
The prices shown above are reference retail prices
Accessories
28mm28mm28mm28mm28mm38mm38mm
Hose
Powder filter set
Prefilter Filter set (for water)
Bending pipe &Straight pipe
Anchor nozzle set, corner nozzle
Front cuffs and joint
Filter bag set
Size Length (m) Front cuffs Part No.
Type Material Part No.
Type Part No.
For model Per pkg. Part No.
1.5
2.5
3.5
5.0
5.0
2.5
5.0
38mm Black 191657-9
28mm
28mm
28mm
28mm
28mm
38mm
38mm
22,38
22,24,38
22,24,38
22,24,38
22,38
38
38
A-34235
195437-5
195433-3
195436-7
A-34229
195434-1
195435-9
Front cuffs 22
Front cuffs 38
Joint 22-38
195547-8
195545-2
195548-6
195558-3
195557-5
VC3210LX1VC1310LX1, VC2510LX1
5
5
Front cuffs 38
Front cuffs 22
Poly bag set
Hose stand
For model Per pkg. Part No.
195432-5
195440-6
VC3210LX1VC1310LX1VC3210LX1
10
10
ColorType Part No.
For model Part No.
195438-3
195441-4
Color Part No.
Gray
Ivory
192236-6
410306-2
Part No.
197323-6
VC1310LX1VC3210LX1VC2510LX1
For model Part No.
195553-3
195554-1
195612-3
VC1310LX1
VC2510LX1
VC3210LX1
For model Part No.
195555-9
195556-7
195611-5
VC1310LX1
VC2510LX1
VC3210LX1
192562-3
192563-1
Aluminum
Aluminum
Bending pipe
Straight pipe
Part No.
195439-1
Includes one each of:- Hose complete 38-2.5- Straight pipe- Bending pipe- Nozzle assembly- Corner nozzle
Cleaning set
Holder set 10-33 Damper set
Part No.
195544-4
Part No.
195552-5
Nozzle assembly
Round brush
Part No.Dry / WetType
198184-7
195551-7
195549-4
195550-9
A-47846
Dry
Dry / Wet
Dry
Wet
Wet
Flooring & carpet
Universal Type
Compact Type (A)
Compact Type (B)
Wide Type
Universal Type
618
C O R D L E S S C L E A N E R S ' A C C E S S O R I E S
Hose 38mm Hose 28mm
Hose 38mmA. A. B-2.
Bending pipeA. Hose
DVC260 Cordless cleaner
DVC860LDVC861LDVC862LDVC863L
DCL500DCL 501
Hose 28mm
Bending pipe Front cuffs38
Front cuffs22
Straight pipe Flexible
Straight pipe
Nozzle assembly Roung brush Corner nozzle
Anchor nozzle set
Crevice nozzle
Nozzle assembly
Straight pipeB-1.
E-1.
J.
G-3.
E-3.F-1. G-1.
C-1.
C-2.Straight pipeC-3. C-4.
D.
K.
Nozzle assembly Shelf brush Round brush Sash nozzleE-2. H. F-2. G-2.
I.
I.
Flexible rubber nozzle
A. Hose Note: Although type A hose can be connected with power tools,
Front cuffs and Joint are required for some power tools
A : for power toolsB : for cleaning
For model: DVC860L, DVC861L, DVC862L, DVC863L, , DVC260* DVC260 only
For model: DCL500, DCL501
Flexible rubber nozzle
Size Length (m) Type with Front cuffs Part No.
28mm
28mm
28mm
28mm
28mm
28mm
28mm
38mm
38mm
-
1.0
1.5
1.5
2.5
3.5
5.0
5.0
2.5
5.0
- -
B
A
A
A
A
A
A
B
B
B
-
38
22,38
22,24,38
22,24,38
22,24,38
22,38
38
38
*143787-2
*152992-0
A-34235
195437-5
195433-3
195436-7
A-34229
195434-1
195435-9
SH00000034
B. Bending pipe
C. Straight pipe
Type Part No.
192562-3
123677-5
B-1
B-2
With 38mm Hose, Aluminum
With 28mm Hose
C-1
B-1 B-2
C-2 C-3 C-4
Type Color Part No.
192563-1
123584-2*
451424-7
451244-9
451425-5
456587-4
451241-5
SH00000060*
-
White
Ivory
Blue
Red
Black
White
Gray
C-1
C-2
C-3
C-4
* Can be extended
619
C O R D L E S S C L E A N E R S ' A C C E S S O R I E S
Type Part No.
Type Dry / Wet Part No.
(*) For DVC860L, DVC862L only
For gentle cleaning by soft-tipped brush
D. Flexible hose F. Round brush
G. Corner nozzle, Sash nozzle & Crevice nozzle
H. Shelf brush
I. Flexible rubber nozzle
J. Anchor nozzle set
K. Front cuffs and Joint
Cleaning set
Charger
Màu sắc Mã số
E-1. Nozzle assembly
Compact type Wide type
Flooring & carpet
Universal type
Compact type A
Compact type B
Wide type
Dry
Dry / Wet
Dry
Wet
Wet
198184-7
195551-7
195549-4
*195550-9
*A-47846 Color Part No.
Color Part No.
Ivory
Blue
Red
Black
White
Gray 197781-6
Color Part No.
Gray 192236-6
For model
For model Charging time Part No.
Part No.
DVC860L, DVC861L, DVC862L, DVC863L
CL104D 180 min DC1001(196829-1)
195439-1
191724-0
198534-6
A-52510
198536-2
198872-6
Front cuffs 22
Front cuffs 24
Front cuffs 38
Joint 22-38
195547-8
195546-0
195545-2
195548-6
F-1
G-1 G-2
Front cuffs 38
Front cuffs 22
G-3
F-2
E-2. Nozzle assembly
E-3. Nozzle assembly
For rug/carpet cleaning
Flooring & carpet
Flooring & carpet
Standard
Type Color Part No.
Type Color Part No.
Flooring & carpet Gray SH00000058
DXSFor rug/carpet cleaning
Universal typeLoại Màu sắc Mã số
Superior in flexibility and for thecleaning of the small place
in the car
Ivory
Blue
Red
Black
White
A-37568
198541-9
A-52526
198543-5
198867-9
A
B
Type Color Part No.
38mmF-1
F-2-
191657-9
A-37471
198549-3
A-52532
198551-6
198877-6
Black
Ivory
Blue
Red
Black
White
Color Part No.
G-1
G-3
Ivory
Ivory
Blue
Red
Black
White
Gray
410306-2
416041-0
451243-1
416225-0
456586-6
451240-7
SH00000042
Includes one each of:- Hose complete 38-2.5 - Straight pipe - Bending pipe- Nozzle assembly - Corner nozzle
Type Color Part No.
White
Ivory
Blue
Red
Black
White
Ivory
Red
Ivory
Blue
Red
Black
White
198183-9
197032-7
198523-1
197033-5
197563-6
197035-1
A-37546
A-52504
122861-9
122859-6
123489-6
123539-7
123486-2
Flooring & carpet
DXSFor rug/
carpet cleaning
Standard
For rug/carpet cleaning
G-2
620
VA C U U M C L E A N E R ' S A C C E S S O R I E S
System chart
Attchments
Hose 38mmA. A.
DVC860L, DVC861L,
Hose 28mm
Bending pipe Front cuffs 38 Front cuffs 22
Front cuffs22, 38
Straight pipe
Nozzle assembly Round brush Corner nozzle Anchor nozzle set
P. 21 -> 26
B-1.
E-1. J.F-1. G-1.
C-1.
K.
K.
Joint 22-38K.
K.
VC3210L VC2510LVC1310L
Hose 38mm Hose 28mm Please view P. 18 - 19 for accessories' details
S Y S T E M C H A R T S
For model Suction Systems and Part No. For model Suction Systems and Part No.
Dust cup set195179-1
196571-4 (w/hose for)
195180-6
Dust extractorattachment
Vacuum attachment
193472-7
195866-2
196536-6
Rotary Hammer, Combination Hammer HR2300, HR2600HR2630, HR2630T
HM1306, HM1317C, HM1307C,HM1812
HR2601
Dust extractorattachment
Dust extractorattachment set
192176-8
Rotary Hammer HR2010
Rotary Hammer,Combination Hammer
Rotary Hammer
DHR165, DHR202, DHR263
HR4511C
HR4013C
(Max. Bit Diameter 40mm)
197168-2(w/o hose for)
197148-8(w/ hose for)
ø28mm hose can be directly connected.
Electric Breaker
196858-4HR5212C*P-81745 standard Accessory
Rotary Hammer, Demolition Hammer
Bull points with over 280mm length
(Hammering mode only)
Cold chisels with over 280mm length
196568-3 (w/o hose for)
17mm(11/16”)Hex: HR4030C
19mm(3/4”)Hex:HR4041C
Scaling chisel (for tile),Bushing toolScaling chisels length
HR4002,HR4511C,HM0870C, HM0871C,HM1203C,HM1213C, HM1214CHR4511C,
SDS-MAX:
ø28mm hose can be directly connected.
Scaling chisels
SDS-MAX only:
SDS-MAX, 17mm (11/16") Hex:
Scaling chisels length
A
B
A
B
Front cuffs 22
Front cuffs 22
Model ModelVC3210L VC2510L
VC1310LDVC861L
A B
W/ Front cuffs W/ Front cuffs
W/ Ø28mm Hose W/ Ø28mm Hose
222438 222438
ModelDVC860LDVC861LDVC862LDVC863L
C
W/ Joint 22-38
W/ Ø38mm Hose
W/ Front cuffs
222438
ModelDVC260
D
W/ Ø28mm Hose
C
D
Directly
Directly
Directly
Directly
C
194548-6Joint 22-38
D
Front cuffs 22
HR2470 series
Vacuum attachment set
21
S Y S T E M C H A R T S
For Model Suction Systems and Part No.
Wall ChaserSG1251J
Angle Cutter 4112HS4114S
Elbow joint 32192613-2
A
B
Front cuffs 38
Front cuffs 38
Angle grinder 180mm 194303-3Angle grinder 230mm 194044-1
Angle grinder180, 230mm
For cup type diamond wheel
195239-9for IEC195250-1
195384-0, 195385-8195387-4, 195388-2
196845-3196846-1
198379-2
Dust collecting wheel guard
Angle Grinder
Angle grinder 115, 125mm
192968-5193794-5 (Economy type)
Dust collecting wheel guard
Dust collecting wheel guard
Concrete PlanerPC5000C
C
Directly
D
Front cuffs 38
Angle Grinder
Angle grinder 115, 125mm
Angle GrinderAngle grinder 125mm
Angle grinder 230mm
For Model Suction Systems and Part No.
Disc Grinder N9500N, 9500NB
192212-0
Rubber sleeve192202-3
Angle Grinder Dust collecting wheel guard
192475-8
192618-2
Dust collecting wheel guard
A
B
Front cuffs 22
Front cuffs 22
D
194548-6Joint 22-38
E
Front cuffs 22
Angle grinder 100mm
Angle grinder 115,125mm
22
S Y S T E M C H A R T SFor Model Suction Systems and Part No.
Circular Saw Joint (Dust nozzle)
N5900B 193068-4
Power PlanerKP0800
1805N JPA122277
Nozzle for vacuum cleaner
192082-7
Nozzle451329-1
Power Planer
1911B
Power Planer
1805NN1900B, KP0800, 1804N
+
Model No. Part No.
N1900B 181572-5
KP0800 451329-1
1804N JPA122278
1805N JPA122277
Nozzle assembly
*Elbow
N1900B JPA122275
KP0800 *416368-8
1804N, 1805N, 181575-9
Joint
*D: DVC260Cannot be used with Planer models
A
B
For Model Suction Systems and Part No.
DHS710
HS300D, HS301D
Circular Saw
Circular Saw
Joint (Dust nozzle)
Joint (Dust nozzle)196520-1
452237-9
Plunge Cut Circular Saw
Aluminum GrooveCutter
SP6000
CA5000X
Front cuffs 24195546-0
Front cuffs 24195546-0
196843-7HS6600
196843-7HS7600
196952-2with short lever)
DHS680
A
B
C
Directly
D
Front cuffs 22
Front cuffs 22
Front cuffs 22
C
Directly
D
Front cuffs 38
Front cuffs 38
Front cuffs 38
*
23
Model No. Part No.
S Y S T E M C H A R T S
For Model Suction Systems and Part No.
Plate JoinerPJ7000
A
B
Front cuffs 22
Front cuffs 22
*D: DVC260Cannot be use with Router models
C
Joint 22-38194548-6
D *
For Model Suction Systems and Part No.
RouterRP1801RP1800RP2301FC
Dust nozzle 194934-8
RouterRP0900, ***RT0700C
Dust nozzle 194733-8
TrimmerRT0700C
Dust nozzle 195559-1
*** Use with Plunge base assembly
A
B
Front cuffs 38
Front cuffs 38
Makita recommend to use 38mm hose when you use Router or Power planer.
C
Directly
D
624
Front cuffs 22
625
S Y S T E M C H A R T S
For Model Suction Systems and Part No.
Dust Nozzle417853-4
4326, 4327, 4328JV0600
JV100D, JV143D, JV183DJig Saw
Jig SawDJV180
4350CTA
B
Front cuffs 22
Front cuffs 22
E
Front cuffs 38
D
Joint 22-38194548-6
Dust Nozzleassembly122652-8
Belt Sander 9032
Finishing SanderBO3710, BO3711BO4901BO4555, BO4556 BO4565, BO4566 BO4557, BO4558
Random Orbit SanderBO5041 BO6030
Multi Tool
TM3000C 196022-7TM3010C 196550-2
196765-1
Dust attachment set
For Model Suction Systems and Part No.
Joint 192518-6
Belt Sander 9924DB
Belt Sander 94039910
Wheel Sander9741
Joint 410899-9
A
B
Front cuffs 38
Front cuffs 38
E
D
Directly
DTM51
Front cuffs 38
S Y S T E M C H A R T S
For Model Suction Systems and Part No. For Model Suction Systems and Part No.
Slide Compound SawLS1018LLS1216
Miter Saw LS1030N
Compound Miter Saw LS1040
Table Top Miter Saw LH1040
Table Saw2704
Table SawMLT100
Dust pointJM27000090
Joint419093-0
Cordless Slide Compound Miter SawLS0815FL
A
B
Front cuffs 38
Front cuffs 38
A
B
C
Directly
D
C
D
Front cuffs 38
Directly
Front cuffs 38
Front cuffs 38
626
627
A U T H O R I S E D S E R V I C E C E N T E R
NORTH
HA NOI
NORTH BRANCHUnit 05, No.01, St. 6, VSIP Bac Ninh Intergrated Township and Industrial Park, Phu Chan Commune, Tu Son Town, Bac Ninh Province.ĐT: 0222 376 5942 Fax: 0222 376 5941
MKT KHANH LINHAdd: No. 5, 53 Nguyen Khoai, Bach Dang W., Hai Ba Trung Dist., Ha Noi.Tel: 024 3821 5620/0909 608 896 Fax: 024 3821 5620
VIET LINH Add: No 13 Yen Bai II St., Hai Ba Trung, Ha Noi.Tel: 024 3821 2232/0903 281 007 Fax: 024 3976 4485
PHONG LIEN Add: No 5 Yen Bai II St., Hai Ba Trung, Ha Noi.Tel: 024 382 15570/0912 466 423 Fax: 024 3976 3014
VIET HUNG Add: 115 Pho Ga, Do Xa Hamlet, Van Diem Village, Thuong Tin Dist, HN.Tel: 024 3385 4773/0972 293 678 Fax: 024 3378 3772
BINH THUY Add: 135 Pho Ga, Do Xa Hamlet, Van Diem Village, Thuong Tin Dist., HN.Tel: 024 3378 3832/0915 306 616 Fax: 024 3378 3832
LUU HONG Add: 90 Cong Gieng, Huu Bang, Thach That, Ha Noi.Tel: 024 3392 9779/0912 354 512
AN KHANG Add: 206 Tran Duy Hung, Cau Giay, Ha Noi.ĐT: 024 3786 8088/024 3786 8089 Fax: 024 3786 8087
PHU QUY Add: No 6, Pham Hong Thai, Hong Bang District, Hai Phong City.Tel: 0912 363 292/0919 258 500 Fax: 0225 3838 158
SON LE Add: No 9 Yen Bai II St., Hai Ba Trung, Ha Noi.Tel: 024 3821 2179/0982 531 970 Fax: 024 3976 4304
PHONG THU Add: 91 Cong Gieng, 3th Huu Bang Fork , Thach That, Ha Noi.Tel: 024 3367 2771/0943 979 575
HUNG PHAT Add: 650 Minh Khai, Hai Ba Trung, Ha Noi.Tel: 024 3636 9955/0989 836 222 Fax: 024 3636 9912
CU QUAN Add: 354 Quang Trung, La Khe, Ha Dong, Ha Noi.Tel: 024 382 7041/0968 379 888
WELDCOM Add: 463 Ngo Gia Tu, Duc Giang W., Long Bien Dist., Ha Noi.Tel: 0243 652 2752/0916 315 442
PHUONG HAI Add: Noi Tri, Quater 1, Tan Hong, Tu Son, Bac Ninh.Tel: 0222 3835 513/0937 262 688/0934 212 007
BAC GIANG
PHUONG DONG Add: Duong Son Hamlet, Duong Thang Village, Hiep Hoa, Bac Giang.Tel: 0204 3873 196/0985 197 016 Fax: 0204 3873 196
TOAN OANH Add: Hamlet 6, Duc Xuan Ward, Bac Kan Town, Bac Kan.Tel: 0209 3870 229/0903 288 409
TRUONG SON Add: No 22 Ngo Gia Tu, Tran Phu, Bac Giang City.Tel: 0987 888 368 Fax: 0204 3824 578
BAC KAN
BAC NINH
QUANG TRUONG Add: Pho Cho Dau, Trung Nghia, Hung Yen.Tel: 0986 721 992/0221 3884 258
CAN OANHAdd: Bo Thoi Town, Khoai Chau, Hung Yen.Tel: 0983 270 098/0166 9966 199
HUNG YEN
LAI CHAU
PHU MANH Add: 192 Tran Phu, Lai Chau Town, Lai Chau Province.Tel: 0213 3791 424/0915 910 424
LANG SON
THE SINH Add: 99 Ngo Quyen, Vinh Trai Ward, Lang Son City.Tel: 0962 681 668/0912 681 668/0984 197 888
LAO CAI
DANG NGA Add: 259 Khanh Yen, New City, Lao Cai.Tel: 0214 3835 602/0986 032 000 Fax: 0214 3835 602
NAM DINH
HUONG VINH Add: 78 Le Hong Phong, Nguyen Du Ward, Nam Dinh City.Tel: 0912 283 254/0228 384 6583/0126 335 2083 Fax: 0228 386 3726
LE TUAN ANH Add: Xuan Truong Town, Xuan Truong District, Nam Đinh.Tel: 0979 314 909/0228 388 5679
KHANH KHANHAdd: Block A, Lam Town, Y Yen, Nam Đinh.Tel: 0228 395 3813/0982 106 192 Fax: 0228 395 3813
NGHE AN
NGHE AN Add: 98 Hong Son Ward, Vinh City, Nghe An.Tel: 0238 0842 961/0238 3581 199/0912 288 929
QUANG LAMAdd: 51 Thai Phien, Hong Son Ward, Vinh City, Nghe An.Tel: 0238 3563 890/0913 312 394 Fax: 0238 3563 890
HOA BINH
DUNG THUONG Add: 486 Bac Hung Dao, Hoa Binh City.Tel: 0946 084 198
CAO BANG
DIEN BIEN
HA GIANG
HUNG VANAdd: Tan Quang, Bac Quang, Ha Giang.Tel: 0219 3827 405/0976 571 945 Fax: 0219 3827 405
HA TINH
HAI PHONG
TRAN MANH Add: No. 2, Pham Hong Thai, Hai Phong City.Tel: 0225 3831 012/0912 446 033
TRUONG TRUNG Add: 443 Pham Van Dong, Hai Thanh, Duong Kinh, Hai Phong City.Tel: 0912 347 942 Fax: 0225 3632 681
HA NAM
TUAN VAN Add: Vinh Tru Town, Ha Nam Province.Tel: 0226 3871 404/0912 065 034 Fax: 0226 3871 404
HOANG ANH Add: 238 Nguyen Huu Tien, Dong Van Town, Duy Tien, Ha Nam.Tel: 0915 428 900
HAO NGUYEN Add: Kios 58th TT Market, Cao Bang Town, Cao Bang Province.Tel: 0917 304 170 Fax: 0206 3855 296
MINH DUCAdd: Street 286, Yen Phu Village, Yen Phong District, Bac Ninh Province.Tel: 0985 018 684
TRUONG VINH Add: 55 Pho Cho Giau St., Tran Phu, Dong Ngan, Tu Son Town, Bac Ninh.ĐT: 0222 3831 025/0983 831 025
PHU HAU Add: 302 Binh Than St., Gia Binh Town, Gia Binh Dist., Bac Ninh Province.Tel: 0222 3677 187/0912 932 605
VU SOAI Add: No. 10, P. Nam Thanh, Dien Bien.Tel: 0215 3927 328/0972 786 688 Fax: 0215 3924 128
HAI DUONG
THIEN THANH Add: 69 Tran Phu, Hai Duong City.Tel: 0220 3859 702/0912 117 733 Fax: 0220 3835 223
HA BINH Add: Yên Tien, Y Yen, Nam Đinh.Tel: 0915 795 444/0914 436 193
KIEU VINH Add: 57 Ha Ton Muc St., Nam Ha, Ha Tinh City.Tel: 0239 3881 657/0915 166 836 Fax: 0239 3881 657
BON PHONG Add: 9A, Nguyen Thai Hoc, Pham Hong Thai, Hong Bang, Hai Phong City.Tel: 0225 3838 605/0169 880 8888
628
A U T H O R I S E D S E R V I C E C E N T E R
QUANG NINH
SON LA
THUY CONG Add: 230 Nuyen Tat Thanh, Yen The Town, Luc Yen, Yen Bai.
Tel: 0216 3542 777/0912 003 456 Fax: 0216 3845 602
YEN BAI
TRONG XUYEN Add: 106 Hoang Hoa Tham, Yen Bai City.
Tel: 0216 3862 809/0914 867 574 Fax: 0216 3862 809
CENTRAL
DA NANG SERVICE CENTER 102 Trieu Nu Vuong Street, Hai Chau 1 Ward, Hai Chau District, Da Nang City.Phone: 0236 352 5079/0236 352 5179 Fax: 0236 352 5479
GIA LAI
DA NANG
TRAN HUNG PHAT Add: 129 Trieu Nu Vuong, Hai Chau 2 Ward, Hai Chau Dist., Da Nang.
Tel: 0236 3868 188/01266 535 695 Fax: 0236 3868 188
HUU TOAN MIEN TRUNG Add: 02 Vo Chi Cong, P. Hoa Xuan, Q.Cam Le, TP. Đa Nang.
Tel: 0236 3619 666/0901 928 046 Fax: 0236 3720 922
HUNG SY Add: 89 Trieu Nu Vuong, Hai Chau Ward, Hai Chau Dist., Da Nang.
Tel: 0236 3962 629/0914 162 885
TUAN TU Add: 204 Hoang Dieu, Nam Duong Ward, Hai Chau Dist., Da Nang.
Tel: 0236 3868 218/0979 024 030 Fax: 0236 3868 219
PHUC HUE Add: 773 Tran Hung Dao, Le Hong Phong Ward, Quy Nhon City, Binh Dinh.Tel: 0256 3815 029/0983 815 029 Fax: 0256 3815 029
LE NGUYEN Add: Hamlet 6, Area 9, Tran Quang Dieu Ward, Quy Nhon City, Binh Dinh.Tel: 0905 841 141/0914 28 29 28 Fax: 0256 3941 181
NGHIEP THANH 2 Add: 361-363 Le Hong Phong, Quy Nhon City, Binh Dinh.Tel: 0256 3811 908/0938 38 38 43
BINH DINH
VINH PHUC
KIM LOC Add: Cong Binh Locality, Thanh Lang Town, Binh Xuyen, Vinh Phuc.Tel: 0211 386 6590/0168 390 1479 Fax: 0211 386 6590
PHU THO
HAI MY Add: 30 Phu Binh, Phu Tho City.Tel: 0166 831 2800/0210 382 0975
SON THUY Add: 82 Cao Thang, Ha Long City, Quang Ninh Province.Tel: 0203 3626 224/0912 289 499 Fax: 0203 3629 290
HONG HIEN Add: Hamlet 91, Block. 6 New Road, Cam Trung, Cam Pha, Quang Ninh.Tel: 0203 3714 999/0946 614 999 Fax: 0203 3714 999
LE DONAdd: 27 Hoa Binh St., Tien Yen Town, Quang Ninh.Tel: 0203 3740 152/0915 563 225 Fax: 0203 3740 152
NHI BEN Add: Km 70, Nong Truong Town , Moc Chau, Son La.Tel: 0912 324 731/0212 3869 760
NGO HUNG Add: 109 To Hieu, Son La City, Son La Province.Tel: 0982 557 007/0212 3858 890/0166 864 6872 Fax: 0212 3858 890
HUAN LIENAdd: 19th Km Hat Lot Town, Mai Son Dist., Son La Province.Tel: 0988 553 899/0987 389 589/0212 844 311
THAI BINH
TUAN HOA Add: 170 Le Quy Don St., Thai Binh City, Thai Binh Province.Tel: 0904 535 533 Fax: 0227 3834 859
THAI NGUYEN
GIANG NGA Add: 18 Trung Thanh Ward, Thai Nguyen City, Thai Nguyen Province.Tel: 0912 042 380/0208 383 3870 Fax: 0208 383 3870
TRANG TRUC MAIAdd: Hamlet 3, Mo Che Ward, Song Cong City, Thai Nguyen Province.Tel: 0208 3709 185/0912 057 828
THANH HOA
BAC HAI Add: No 2 Cua Ta, Lam Son Ward, Thanh Hoa City.Tel: 01202 222 022 Fax: 0237 3720 043
TUYEN QUANG
NGOC HUONGAdd: 165 Quang Trung, Hamlet 24, Tan Quang Ward, Tuyen Quang City.Tel: 0917 361 464/0987 197 199 Fax: 0207 3827 015
HIEN MINH Add: Center 1st, Vinh Loc Town, Chiem Hoa, Tuyen Quang.Tel: 0207 3851 259 Fax: 0207 3851 259
BINH BUOI Add: 136 Quang Trung, Phu Hai Ward, Dong Hoi City, Quang Binh.Tel: 0232 3823 588/0935 301 167
QUANG BINH
XUAN MINH Add: 190 Le Loi, Duc Ninh Village, Dong Hoi City, Quang Binh.Tel: 0232 385 6651/0979 507 651
CUONG HUE Add: 386-388 Tran Hung Dao, Sub-zone 11, Nam Ly, Dong Hoi, Quang Binh.Tel: 0232 3825 616/0913 376 573
THUAN KHOAAdd: 108-110 Nguyen Khiem, Nghia Chanh, Quang Ngai.Tel: 0255 3824 169/0914 091 095
NGOC PHUOC Add: 94 Hung Vuong, Ai Nghia Town, Dai Loc, Quang Nam.
Tel: 0235 3865 655 Fax: 0235 3865 666
QUANG NGAI
SONG THANH - HUY HOANG Add: 235 Quang Trung, Le Hong Phong Ward, Quang Ngai City, Quang Ngai.Tel: 0914 158 135
TIEN Add: 687 Phan Chu Trinh, Hoa Phuong Ward, Tam Ky City, Quang Nam.Tel: 0935 464 890
QUANG NAM
NINH BINH
THO MINH Add: 51 Thanh Son, Thanh Binh, Ninh Binh City.Tel: 0229 3873 149/0913 384 958
NGOC DONG Add: 131 Le Dai Hanh, Thanh Binh Ward, Ninh Binh City.Tel: 0229 3881 281/0913 292 452
629
A U T H O R I S E D S E R V I C E C E N T E R
TRAN HUNG PHAT Add: 339 Ben Binh Dong, Ward 11, Dist. 8, HCM City.Tel: 028 3951 6368 Fax: 028 3951 6378
TRUONG HUYNH ANHAdd: 178 Nguyen Thai Binh, Nguyen Thai Binh Ward, Dist. 1, HCM City.Tel: 028 3821 3324 Fax: 028 3914 4996
LAN ANH Add: 76 Quang Trung, Ward 10, Go Vap Dist., Ho chi Minh City.Tel: 028 3984 3984/0903 390 350 Fax: 028 3894 3905
KIM MINH C.L Add: 95B Trinh Duc Hoai, Ward 13, Dist. 5 , HCM City.Tel: 028 3853 5323/0983 270 351 Fax: 028 3856 3809
ANH PHU Add: 1244 Lac Long Quan, Ward 8, Tan Binh Dist., HCM City.Tel: 028 3971 2412/0908 374 035 Fax: 028 3971 6899
LQ Add: No 89 49th St., Town 8, Tan Tao Ward, Binh Tan Dist., HCM City.Tel: 0908 641 011/028 2253 5862/0903 097 843 Fax: 028 2253 6862
NGOC THUY Add: 18/1B Huynh Tan Phat, Town 2, Tan Phu Ward, Dist. 7, HCM City.Tel: 028 3773 1267 Fax: 028 3773 1267
BA RIA - VUNG TAU
DIEM DIEM Add: 204 Thong Nhat, Ward 8, Vung Tau City, Ba Ria-Vung Tau.Tel: 0254 3600 666/0907 410 345
QUOC HUNG Add: 168 Truong Cong Dinh, Ward 3, Vung Tau City, Ba Ria-Vung Tau.Tel: 0254 3513 478/0125 341 7479 Fax: 0254 3533 707
HUYNHAdd: 99 Bach Dang, Phuoc Trung Ward, Ba Ria City, Ba Ria-Vung Tau.Tel: 0943 698 317/0903 698 317 Fax: 0254 3827 787
QUYNH VU Add: 3/3 Ngoc Ha Village, Phu My Town, Tan Thanh Dist, Ba Ria-Vung Tau.Tel: 0254 3893 257/0913 665 022 Fax: 0254 3921 196
ANH HOIAdd: 157 Dang Thuc Vinh, Hamlet 7, Dong Thanh, Hoc Mon, HCM City.Tel: 028 3711 5812/0919 047 193 Fax: 028 3711 5812
HUY Add: 1/18 Hoa Lan 1, Thuan Giao, Thuan An Township, Binh Duong.Tel: 0913 933 695
BINH DUONG
HUU TOAN VIET NAM Add: 5/219 Nest 4A, Hoa Lan 1 Town, Thuan Giao, Thuan An, Binh Duong.Tel: 0274 3719 444
BACH KHOA POWER TOOLS Add: 98 Bui Huu Nghia, Ward 2, Binh Thanh Dist., HCM City.Tel: 0907 992 357
HO CHI MINH CITY
SOUTH
MAKITA VIET NAM CO.,LTDUnit 06, Block 16 18 L1-2, Street 3, VSIP II Industrial Park,Hoa Phu Ward, Thu Dau Mot City, Binh Duong ProvinceĐT: 0274 362 8338 Fax: 0274 362 8339
DAI TRUNG HIEU Add: 1248, Town 4, My Phuoc Ward, Ben Cat Township, Binh Duong.Tel: 0274 3553 208 Fax: 0274 3557 208
THIEN PHAT Add: 184A, Town 1, An Phu Ward, Thuan An Township, Binh Duong.Tel: 0274 3764 850/0908 388 043 Fax: 0274 3764 851
Bình Dương
BINH PHUOC
BINH THUAN
DUNG SY Add: 990 - 992 Phu Rieng Do, Tan Thien Ward, Dong Xoai Township, Binh Phuoc.Tel: 0271 388 1266/0902 307 307
HUNGAdd: 579 Tran Hung Dao, Lac Dao Ward, Phan Thiet City, Binh Thuan.Tel: 0252 2460 077/0918 510 332 Fax: 0252 3720 906
DONG NAI
NGOC KHANH Add: 62/7C, Town 5A, Tan Bien Ward, Bien Hoa City, Dong Nai.Tel: 0123 612 2355 Fax: 0251 3881 417
TIN THANHAdd: 121B/4 Highway 1A, Town 10, Tan Bien Ward, Bien Hoa City, Dong Nai.Tel: 0903 673 202
HUNG LOI NINH THUAN Add: 350-352 Thong Nhat, Phu Ha, Phan Rang - Thap Cham, Ninh Thuan.Tel: 0259 3832 015/0913 839 260
ANH VU 3 Add: 166 Thong Nhat, Phu Ha Ward, Phan Rang, Thap Cham, Ninh Thuan.Tel: 0259 3821 944/0913 899 170 Fax: 0259 3833 696
NINH THUAN
DUY PHAT Add: 754 CMT8, Town 1, Ward 4, Tay Ninh City, Tay Ninh Province.Tel: 0276 3626 488/0913 798 379 Fax: 0276 3626 499
CONG TUAdd: An Binh Hamlet, An Tinh Village, Trang Bang Dist., Tay Ninh.Tel: 0276 3899 604/0908 711 919
XUAN DUYEN Add: 837-839-841 CMT8, Tay Ninh City, Tay Ninh Province.Tel: 0276 3842 030/0982 842 030 Fax:0276 3831 565
TAY NINH
HONG LINH Add: 199 Le Duan, Ward 2, Dong Ha City, Quang Tri.Tel: 0233 3853 902
TAM THOAdd: 113 Le Duan, Dong Le Ward, Dong Ha City, Quang Tri.
Tel: 0233 3584 373
LE QUANG Add: 04 Tran Nhan Tong, Hue City, Thua Thien Hue.Tel: 0234 2851 243
QUANG TRI
THUA THIEN HUE
630
A U T H O R I S E D S E R V I C E C E N T E RTHAI PHUONG Add: Hung Vuong St., Hamlet 1, Duong Dong Town, Phu Quoc, Kien Giang.Tel: 0908 646 665 Fax: 0297 3836 757
ĐUC TOAN (GAU VUA) Add: 233 Nguyen Trung Truc, Town 5, Duong Dong, Phu Quoc, Kien Giang.Tel: 0936 148 90
TRAN LIEN HUNG Add: No 95, 3/2 St., Ward 1, Soc Trang City, Soc Trang Province.Tel: 0299 3821 436/0965 155 490 Fax: 0299 3614 224
SOC TRANG
LONG AN
VIET TRUNG 2 Add: No 51 Highway 62, Ward 2, Tan An Township, Long An.Tel: 0272 3836 757/0903 188 999
HUNG VANAdd: 11 Ly Cong Uan, Ward 1, My Tho City, Tien Giang.Tel: 0273 3883 577/0977 374 333 Fax: 0273 3977 059
VINH HUNG Add: 123 Trung Trac, Ward 1, My Tho City, Tien Giang.Tel: 0273 3585 985 Fax: 0273 3882 200
TIEN GIANG
NGO THANH LOI Add: 7 Tran Phu, Hamlet 6, Ward 6, Tra Vinh City, Tra Vinh.Tel: 0294 3856 569
TRA VINH
THANH TAM Add: 98 Bach Dang, Hamlet 5, Ward 4, Tra Vinh City, Tra Vinh.Tel: 0913 790 891
NGUYEN DUNG PHAT Add: 64A Luu Van Liet, Ward 2, Vinh Long City, Vinh Long.Tel: 0270 3820 137/0918 556 289 Fax: 0270 3863 066
VINH LONG
SAU DIEP Add: 81 Tran Phu, Rach Gia City, Kien Giang.Tel: 0297 3867 790/0918 323 423
KIEN GIANG
DONG THAP
HAU GIANG
HOANG DUY Add: 126 CMT8, Ward 2, Cao Lanh City, Dong Thap.Tel: 0277 3870 808
TIN HOAAdd: 405 Tran Hung Dao, Town 2, Ward 1, Vi Thanh City, Hau Giang.Tel: 0939 835 835
BAY KOHLER Add: 73-74-75 Cao Lanh Market, Cao Lanh City, Dong Thap.Tel: 0977 268 679
MEKONG DELTA
CAN THO SERVICE CENTER226 Vo Van Kiet Street, An Thoi Ward, Binh Thuy District, Can Tho City.ĐT: 0292 389 4358 Fax: 0292 389 4359
CENTRAL HIGHLANDS
BUON MA THUOT SERVICE CENTER 60 Y Jut, Thong Nhat Ward, Buon Ma Thuot City, Dak Lak Province.ĐT: 0262 355 4556 Fax: 0262 355 4557
AN GIANG
LE THANHAdd: 247A Tran Hung Dao, My Xuyen Ward, Long Xuyen City, An Giang.Tel: 0296 6250 020/0918 760 026 Fax: 0296 6253 051
BAC LIEU
VINH KHIEMAdd: 16A Phan Ngoc Hien, Hamlet 2, Ward 3, Bac Lieu.Tel: 0291 382 1134/0939 667 979
BEN TRE
NGAN Add: 148 Nguyen Hue, Ward 1, Ben Tre City, Ben Tre Province.Tel: 0275 3826 861/ 0918 228 738
CA MAU
CAN THO
TAN TIEN Add: No 140, 3/2 St., Xuan Khanh Ward, Ninh Kieu Dist., Can Tho City.Tel: 0292 3739 255/0908 631 070 Fax: 0292 3730 683
NGOC MYAdd: 190 Nguyen An Ninh, Tan An Ward, Ninh Kieu Dist., Can Tho City.Tel: 0292 3814 763/0933 757 579 Fax: 0292 381 4763
THANH HOANG Add: 87 Phan Dinh Phung, Tan An Ward, Ninh Kieu Dist., Can Tho City.Tel: 0292 381 5843/0937 174 561 Fax: 0292 381 5843
VINH TAI Add: 2/2 Ly Bon St., Ward 2, Ca Mau City, Ca Mau Province.Tel: 0290 6542 889/0919 135 790 Fax: 0290 3835 599
DAK LAK
VAN ANHAdd: 88 Dien Bien Phu, Thong Nhat Ward, Buon Ma Thuot City, Dak Lak.Tel: 0262 3844 877/0943 749 777 Fax: 0262 3854 647
CHAU MAI - TY VY Add: 120 Le Hong Phong, Thong Nhat Ward, Buon Ma Thuot City, Dak Lak.Tel: 0262 3853 820/0913 479 400
THANG LONG Add: 588 Giai Phong, Ea D'rang, H. Ea H'leo, Dak Lak.Tel: 0262 2221 931 Fax: 0262 377 7722
TAN CHAU DUNG Add: 73 Ngyen Tat Thanh, Tan An Ward, Buon Ma Thuot City, Dak Lak.Tel: 0936 666 909
MINH TU Add: 160 Ton Duc Thang, Nghia Thanh Ward, Gia Nghia Township, Dak Nong.Tel: 0935 595 559
DAK NONG
LAC NHO Add: 14 Nguyen Tat Thanh, Dak Mil Town, H. Dak Mil, Dak Nong.Tel: 0261 628 3183/ 0943 342 020 Fax: 0261 374 1111
KHANH HOA
THANH DUNGAdd: 53 Pham Van Dong, Cam Thuan Ward, Cam Ranh City, Khanh Hoa.Tel: 0258 3626 0258/0914 019 779 Fax: 0258 3626 0258
HUU PHUOC Add: Huong Long Civil Group, Ba Ngoi Ward, Cam Ranh City, Khanh Hoa.Tel: 0258 3855 600/0905 230 844
TAN QUYNH Add: No 31B, St. 2/4, Van Thang Ward, Nha Trang City, Khanh Hoa.Tel: 0258 3813 856/0903 590 872 Fax: 0258 3827 793
HUNG HOA NHA TRANGAdd: 30 Sinh Trung, Van Thanh Ward, Nha Trang City, Khanh Hoa.Tel: 0258 3817 633/0989 976 095
BAO THANG Add: 90 Tran Phu, Pleiku City, Gia Lai.Tel: 0269 3828 116/0983 723 292
DUC CHI (CHI THANH) Add: 83 Nguyen Tat Thanh, Hoa Lu Ward, Pleiku City, Gia Lai.Tel: 0269 3823 028/0913 408 412 Fax: 0269 3823 582
GIA LAI
VINH DUY Add: 359 Ba Trieu, Kon Tum City, Kon Tum.Tel: 0260 2212 133/0905 303 366 Fax: 0260 2212 133
KON TUM
DANH Add: 146 Nguyen Hue, Kon Tum City, Kon Tum.Tel: 0913 446 446
631
G e n e r a l P o w e r To o l S a f e t y W a r n i n g s
AUTHORISED SERVICE CENTER
WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.Save all warnings and instructions for future reference.The term “power tool” in the warnings refers to your mains-oper-ated (cordless) power tool.
Work area safety1. Keep work area clean and well lit.Cluttered or dark areas invite accidents.
2. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust.Power tools create sparks which may ignite the dust or fumes.
3.Keep children and bystanders away while operating a power tool. Distractions can cause you to close control.
Electrical safety4. Power tool plugs must match the outlet.Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and watching outlets will reduce risk of electric shock.
5. Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators.There is an increased risk of electric shock if your body is earthed or grounded.
6. Do not expose power tools to rain or wet conditions.Water entering a power tool will increase the risk of electric shock.
7. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool.Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
8. When operating a power tool outdoors, use an extension cord suitable for outdoor use.Use of a cord suitable for outdoor use reduces the risk of electric shock.
9. If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply.
Use of an RCD reduces the risk of electric shock.
10. Use of power supply via a RCD with a rated residual current of 30 mA or less is always recommended.
Personal safety11. Stay alert, watch what you are doing and use common sense when operating a power a tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.
12. Use personal protective equipment. Always wear eye protection.Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.
13. Prevent unintentional strating. Ensure the switch is in the off-posi-tion before connecting to power source and/or battery pack, picking up or carrying the tool.Carrying power tools with yours finger on the switch or energising power tools that have the switch on invites accidents.
14. Remove any adjusting key or wrench before turning the power tool on.A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
15. Do not overreach. Keep proper footing and balance at all times.This enables better control of the power tool in unexpected situations.
16. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, cothing, and gloves away from moving parts.Loose clothes, jewellery or long hair can be caught in moving parts.
17. If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used.Use of dust collection can reduce dust-related hazards.
Power tool use and care18. Do not force the power tool. Use the correct power tool for your application.
The correct power tool will do the job better and safer at the rate for which it was desinged.
19. Do not use the power tool if the switch does not turn it on and off.Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
20. Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools.Such preventive safety measures reduce the risk of starting the power tool accidentally.
21. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool.Power tools are dangerous in the hands of untrained users.
22. Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation.If damaged, have the power tool repaired before use.Many accidents are caused by poorly maintained power tools.
23. Keep cutting tools sharp and clean.Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
24. Use the power tool, accessories and tool bits ect. In accordance with these instructions, talking into be performed.Use of the power tool for operations different from those intended could result in a hazardous situation.
Service25. Have your power tool serviced by a qualified repair person using only identical replacement parts.This will ensure that the safety of the power tool is maintained.
26. Follow instruction for lubricating and changing accessories.
27. Keep handles dry, clean and free from oil and grease.
DAT THANH Add: 61 Hai Ba Trung, Lien Nghia Town, Duc Trong, Lam Dong.Tel: 0263 3841 618
LAM DONG
MINH KY Add: 103 Thong Nhat, Lien Nghia Town, Duc Trong, Lam Dong.Tel: 0263 3841 044/0913 667 122
ANH SANG Add: 32 Phan Dinh Phung, Da Lat City, Lam Dong.Tel: 0913 658 851 Fax: 0263 3794 625
VU Add: 14C Pham Ngu Lao, Ward 3, Da Lat City, Lam Dong.Tel: 0263 3834 823
THAI BINH Add: 1066 Hung Vuong, Di Linh Dist., Lam Dong.Tel: 0263 3871 363
THANH TRIAdd: 05 Nguyen Thai Hoc, Tuy Hoa City, Phu Yen.Tel: 0257 3822 697/0905 822 697
PHU YEN
Unit 06, Block 16 18 L1-2, Street 3, VSIP II Industrial Park, Hoa Phu Ward, Thu Dau Mot City, Binh Duong Province, Vietnam.
Phone: 0274-3628338 / Fax: 0274-3628339Website : www.makita.com.vn
MAKITA VIET NAM CO.,LTD
102 Trieu Nu Vuong Street, Hai Chau 1 Ward, Hai Chau District, Da Nang City, Vietnam.Phone: 0236-3525079 – 0236-3525179 Fax:0236-3525479
DA NANG SERVICE CENTER
226 Vo Van Kiet Street, An Thoi Ward, Binh Thuy District, Can Tho City, Vietnam.Phone: 0292-3894358 Fax : 0292-3894359
CAN THO SERVICE CENTER
60 Y Jut, Thong Nhat Ward, Buon Ma Thuot City, Dak Lak Province, Vietnam.Phone : 0262-3554556 Fax : 0262-3554557
BUON MA THUOT SERVICE CENTER
Unit 05, No.01, Street 6, VSIP Bac Ninh Intergrated Township and Industrial Park, Phu Chan Commune, Tu Son Town, Bac Ninh Province, Vietnam.
Phone: 0222-3765942 Fax : 0222-3765941
NORTH BRANCH