www.ti.com 2015

Enhanced Products (EP) Guide

Amplifiers and Linear

Interface

Data Converters

Power Management

Processor Platforms

Logic

HIREL

Class N

2 | Enhanced Products Guide 2015 Texas Instruments

Enhanced Products GuideTable of Contents

Table of ContentsIntroduction

TI’s Enhanced Product (EP) line offers design flexibility while still meeting Aerospace, Defense and Industrial stan-dards for operating environments where high reliability and long service life are a requirement. In addition, designers in other rugged operating environments and long service life application fields can benefit from the EP line.

TI’s Enhanced Product line is a commercial of-the-shelf (COTS) solution with the following key benefits:• Fabrication and assembly controlled

baseline• No use of Pure Sn bond pads, balls or

Cu bond wires• DLA Vendor Items Drawings (VID or

V62) part numbers that eliminate the need for source controlled drawings

• Extended product change notification (PCN)

• Extended temperature performance (typically -55°C to +125°C or customer specified)

• Standalone data sheet• Qualification and Reliability reports• Extended HAST testing• Product traceability• Long product life cycles

TI’s EP line offers the additional benefit of support from the TI High Reliability Group to offer capabilities that surpass TI’s standard catalog offering. Among these capabilities are :• Different choice of packages from our

TI standard catalog offering• Enhanced testing coverage for devices

The TI HiRel group can work with the customer to understand their require-ments to release EP devices with the features specified above.

TI’s EP products are warranted to perform to data sheet specifications in environments that require extended temperatures (typically -55°C to +125°C). To ensure that a device exhibits the highest quality and reliability possible for targeted applications, TI performs the following qualification before the device is released:

• Qualification data is reviewed and audited for accuracy and compliance

• Reliability and electromigration monitoring is performed at maximum recommended operating conditions in the targeted package

• Certified test programs and test hardware

• Electrical characterization is performed across specified temperature range

• Package performance is confirmed over extended temperatures (some mold compounds are not suitable for extended temperatures)

EP versus upscreening:

TI’s EP portfolio offers an alternative to third party upscreening for design-ers who need higher reliability compo-nents. Although our EP products receive additional testing and process verifica-tion over and above their commercial counterparts, they may still not be suit-able for all environments, so TI strongly suggests that OEMs qualify devices for their applications.

TI’s EP line eliminates the following issues with upscreening:• Yield loss and damage caused by

electrical overstress and handling• Mechanical damage, which causes

moisture issues• Burn-in, which can cause lead finish

degradation• Lack of support by IC manufacturers• Few upscreening test facilities have the

ability to test complex parts• No access to TI’s wafer processing

history by third parties

Additional value that can be expected from TI’s EP line:• Qualification summary report• Access to leading-edge commercial

technology• Commitment to the Industrial, Medical,

Avionic and Defense markets• Customer-driven portfolio• Enhanced obsolescence management

In addition to the active EP products listed in this guide and on our website, TI will evaluate the release of other TI’s catalog devices in an EP versions based on customer requirements.

Please contact TI’s Product Information Center to discuss your needs. (Contact information on page 32.)

2 Overview

Featured Products3 Motor Drivers4 Digital Signal Processors6 Microcontrollers9 Power Management

Selection Tables10 Amplifiers and Linear12 Interface13 Data Converters14 Power Management20 Processor Platforms22 Logic30 HIREL31 Class N32 Resources

Section TitleSection Subtitle

Texas Instruments Enhanced Products Guide 2015 | 3

Featured ProductsMotor Drivers

Stepper DriversDRV8842-EP

DRV8842-EP block diagram

Key features• Single H-Bridge Current-Control

Motor Driver• 5-A Maximum Drive Current at

24 V, 25ºC• Built-In 3.3-V Reference Output• Industry-Standard PWM Control

Interface• Thermally Enhanced Surface Mount

Package• -55ºC to 125ºC operation

Applications• Printers• Scanners• Office Automation Machines• Gaming Machines• Factory Automation• Robotics

Get more information: www.ti.com/product/DRV8842-EP

The DRV8842-EP provides an integrated motor driver solution for printers, scanners, and other automated equipment applications. The device has one H-bridge driver, and is intended to drive one DC motor, one coil of a stepper motor, or other loads. The output driver block consists of N-channel power MOSFETs configured as an H-bridge. The DRV8842-EP can supply up to 5-A peak or 3.5-A RMS output current (with proper heatsinking at 24 V and 25°C).

Thermal Shut down

OUT1

OUT1

OUT2

OUT2

GNDGND

Step Motor

VM

VM

ISEN

ISEN

IN2

I0

I2

I3

VREF

VM

Internal Reference &

Regs

Int. VCC

nFAULT

Control Logic

nRESET

Motor Driver

IN1

nSLEEP

VMVM

V3P3OUT

3.3V

LS Gate Drive

+

+ -

-

3.3V

VREF

I1

I4

DCM

DECAY

Charge Pump

0.1 Fμ

0.01 Fμ

VM

CP1

CP2

VCP

HS Gate Drive 1MΩ

4 | Enhanced Products Guide 2015 Texas Instruments

Section TitleSection SubtitleFeatured ProductDigital Signal Processors

The SM320C6678 DSP is a highest-performance fixed/floating-point DSP that is based on TI’s KeyStone multicore architecture. Incorporating the new and innovative C66x DSP core, this device can run at a core speed of up to 1 GHz. For developers of a broad range of applications, such as mission critical, medical imaging, test and automation, and other applications requiring high performance, TI’s SM320C6678 DSP offers 8 GHz cumulative DSP and enables a platform that is power-efficient and easy to use. In addition, it is fully backward compatible with all existing C6000 family fixed and floating point DSPs.

Key features• 8 C66x DSP Core @ 1GHz• 44.8 GMAC/Core for Fixed Point

@ 1 GHz• 22.4 GFLOP/Core for Floating Point

@ 1 GHz• Network Coprocessor• Temperature range -55°C to +115°C

Applications• Mission-Critical Systems• High-Performance Computing Systems• Communications• Audio• Video Infrastructure• Imaging• Analytics• Networking• Media Processing• Industrial Automation• Automation and Process Control

SM320C6678-HIRELMulticore Fixed and Floating-Point DSP

Get more information: www.ti.com/product/SM320C6678-HIREL

SM320C6678-HIREL functional block diagram

8 Cores @ up to 1.4 GHz

PowerManagement

Debug & Trace

Boot ROM

Semaphore

SR

IO4

PC

Ie2

UA

RT

TS

IP2

SP

I

IC2

PacketDMA

Multicore Navigator

QueueManager

GP

IO

3

PLL

EDMA

3

EM

IF 1

6

4MBMSM

SRAM64-Bit

DDR3 EMIF

Memory Subsystem

MSMC

C66x™CorePac

32KB L1P-Cache

32KB L1D-Cache

512KB L2 Cache

C66x™CorePac

32KB L1P-Cache

32KB L1D-Cache

512KB L2 Cache

C66x™CorePac

32KB L1P-Cache

32KB L1D-Cache

512KB L2 Cache

C66x™CorePac

32KB L1P-Cache

32KB L1D-Cache

512KB L2 Cache

C66x™CorePac

32KB L1P-Cache

32KB L1D-Cache

512KB L2 Cache

C66x™CorePac

32KB L1P-Cache

32KB L1D-Cache

512KB L2 Cache

C66x™CorePac

32KB L1P-Cache

32KB L1D-Cache

512KB L2 Cache

C66x™CorePac

32KB L1P-Cache

32KB L1D-Cache

512KB L2 Cache

TeraNetHyperLink TeraNet

Network Coprocessor

Sw

itch

tenre

htE

hctiw

SS

GM

II2

PacketAccelerator

SecurityAccelerator

SM320C6678-HIREL

Texas Instruments Enhanced Products Guide 2015 | 5

Section TitleSection SubtitleFeatured ProductsDigital Signal Processors

31

621

UCD7242

VIN

VGG

Generator

VGG DIS VGG

ThermalSense

TMON

22

BP3GND

32

25

18

26

BST-B

BSW-B

SW-B

12

10

11

PGND

IMON-B

FLT-B

SRE-B

PWM-B

8

Testmode

30

2

9

1

7

3

4

5

CurrentSense

Processor20

28 292719

DriveLogic

13

Driver

Driver

VIN

BST-A

BSW-A

SW-A

24

23

14

Driver

Driver

VIN

VDD LDO

IMON-A

FLT-A

SRE-A

PWM-A

CurrentSense

Processor

DriveLogic

VIN

VIN VIN

VOUT-AVOUT-B

Short

VIN

15

16

PGND

17

Get more information: www.ti.com/product/UCD7242-EP

UCD7242-EP functional block diagram

Digital Power ControlUCD7242-EPThe UCD7242 is a complete power system ready to drive two independent buck power supplies. High side MOSFETs, low side MOSFETs, drivers, current sensing circuitry and necessary protection functions are all integrated into one monolithic solution to facili-tate minimum size and maximum efficiency. Driver circuits provide high charge and discharge current for the high-side NMOS switch and the low-side NMOS synchronous rectifier in a synchronous buck circuit. The MOSFET gates are driven to +6.25 V by an internally regulated VGG supply. The internal VGG regulator can be disabled to permit the user to supply an independent gate drive voltage. This flexibility allows a wide power conversion input voltage range of 2.2 V to 18 V.

Key features• Fully Integrated Power Switches• Wide Input Voltage Range:

2.2 V to 18 V• Up to 10-A Output Current per Channel• Switching Frequencies Up to 2MHz• Thermal Protection• Temperature range -55°C to +125°C

Applications• Digitally-Controlled Synchronous-Buck

Power Stages• High Current Dual-Phase VRM/EVRD

Regulators for Desktop,• Server, Telecom and Notebook

Processors

6 | Enhanced Products Guide 2015 Texas Instruments

Section TitleSection SubtitleFeatured ProductsMicrocontrollers (MCU)

MSP430™ MicrocontrollersMSP430FR5739-EP

MSP430FR5739-EP block diagram

Key features• Optimized Ultra-Low Power Modes• Ultra-Low-Power Ferroelectric RAM

(FRAM)• Intelligent Digital Peripherals• Enhanced Serial Communication• Power Management System• -55ºC to 85ºC operation

Applications• Home Automation• Security• Data Acquisition• Sensor Management

Get more information: www.ti.com/product/MSP430FR5739-EP

The Texas Instruments MSP430FR573x family of ultra-low-power microcontrollers consists of multiple devices that feature embedded FRAM nonvolatile memory, ultra-low-power 16-bit MSP430™ CPU, and different peripherals targeted for various appli-cations. The architecture, FRAM, and peripherals, combined with seven low-power modes, are optimized to achieve extended battery life in portable and wireless sensing applications. FRAM is a new nonvolatile memory that combines the speed, flexibil-ity, and endurance of SRAM with the stability and reliability of flash, all at lower total power consumption. Peripherals include a 10-bit analog-to-digital converter (ADC), a 16-channel comparator with voltage reference generation and hysteresis capabilities, three enhanced serial channels capable of I2C, SPI, or UART protocols, an internal DMA, a hardware multiplier, an RTC, five 16-bit timers, and digital I/Os.

Clock System

16 KB

8 KB

FRAM

(FR5739)

(FR5735)4 KB

(FR5731)

1 KB

RAMMCLK

ACLK

SMCLK

CPUXV2 and

Working Registers

EEM (S: 3+1)

PJ.4/XIN PJ.5/XOUT

JTAG/ SBW

Interface

DMA

3 Channel

Power Management

SVS

SYS

Watchdog

MPY32

TA0 TA1

(2) Timer_A 3 CC

Registers

TB0 TB1 TB2

(3) Timer_B 3 CC

Registers

ADC10_B

200KSPS

14 channels (12 ext/2 int)

10 Bit

DVCC DVSS AVCC AVSS

RST/NMI/SBWTDIO

RTC_BComp_D

16 channels

VCORE

MAB

MDB

TEST/SBWTCKPJ.0/TDO

PJ.1/TDI/TCLKPJ.2/TMSPJ.3/TCK

I/O Ports P1/P2

2×8 I/Os

Interrupt & Wakeup

PA 1×16 I/Os

PAP1.x P2.x

I/O Ports P3/P4

1×8 I/Os 1x 2 I/Os Interrupt

& Wakeup PB

1×10 I/Os

PBP3.x P4.x

REF

CRC

eUSCI_A0: UART,

IrDA, SPI

eUSCI_B0: SPI, I2C

Boot ROM

Memory Protection

Unit

eUSCI_A1: UART,

IrDA, SPI

Clock System

16 KB

8 KB

FRAM

(FR5739)

(FR5735)4 KB

(FR5731)

1 KB

RAMMCLK

ACLK

SMCLK

CPUXV2 and

Working Registers

EEM (S: 3+1)

PJ.4/XIN PJ.5/XOUT

JTAG/ SBW

Interface

DMA

3 Channel

Power Management

SVS

MPY32

TA0 TA1

(2) Timer_A 3 CC

Registers

TB0 TB1 TB2

(3) Timer_B 3 CC

Registers

ADC10_B

200KSPS

14 channels (12 ext/2 int)

10 Bit

DVCC DVSS AVCC AVSS

RST/NMI/SBWTDIO

RTC_BComp_D

16 channels

VCORE

MAB

MDB

TEST/SBWTCKPJ.0/TDO

PJ.1/TDI/TCLKPJ.2/TMSPJ.3/TCK

I/O Ports P1/P2

2×8 I/Os

Interrupt & Wakeup

PA 1×16 I/Os

PAP1.x P2.x

I/O Ports P3/P4

1×8 I/Os 1x 2 I/Os Interrupt

& Wakeup PB

1×10 I/Os

PBP3.x P4.x

REF

CRC

eUSCI_A0: UART,

IrDA, SPI

eUSCI_B0: SPI, I2C

Boot ROM

Memory Protection

Unit

eUSCI_A1: UART,

IrDA, SPI

SYS

Watchdog

Texas Instruments Enhanced Products Guide 2015 | 7

Section TitleSection SubtitleFeatured ProductsMicrocontrollers (MCUs)s

Get more information: www.ti.com/product/TMS570LS3137-EP

TMS570LS3137-EP functional block diagram

Hercules MicrocontrollersTMS570LS3137-EP

The TMS570LS3137-EP device is a high-performance microcontroller family for safety systems. The safety architecture includes the following: Dual CPUs in lockstep, CPU and memory Built-In Self-Test (BIST) logic, ECC on both the flash and the data SRAM, Parity on peripheral memories Loopback capability on peripheral I/Os. The TMS570LS3137-EP device integrates the ARM Cortex-R4F Floating-Point CPU which offers an efficient 1.66 DMIPS/MHz, and has configurations which can run up to 180 MHz, providing up to 298 DMIPS. The device supports the word-invariant big-endian [BE32] format. With integrated safety features and a wide choice of communication and control peripherals, the device is an ideal solution for high-performance real-time control applications with safety-critical requirements.

Key features• Dual CPUs Running in Lockstep• ARM-Cortex - R4F 32-Bit RISC CP• Temperature range -40°C to +125°C

Applications• Aerospace and Avionics• Railway Communications• Off-road Vehicles• Battery Management Systems• High temperature electronics

DMA POM DMM HTU1 FTU HTU2 EMAC

CRC

MibADC1

DCAN1

MibADC2

DCAN2

DCAN3

LIN

SCI

I2CN2HET1 FlexRayGION2HET2

SPI4

Emulation

MDIO

MII

MibSPI1

CAN1_RXCAN1_TXCAN2_RXCAN2_TXCAN3_RXCAN3_TXMIBSPI1_CLKMIBSPI1_SIMO[1:0]MIBSPI1_SOMI[1:0]

MIBSPI1_nCS[5:0]MIBSPI1_nENA

SPI2

SPI2_CLKSPI2_SIMOSPI2_SOMISPI2_nCS[1:0]SPI2_nENA

MibSPI3

MIBSPI3_CLKMIBSPI3_SIMOMIBSPI3_SOMIMIBSPI3_nCS[5:0]MIBSPI3_nENA

SPI4_CLKSPI4_SIMOSPI4_SOMISPI4_nCS0SPI4_nENA

MibSPI5

MIBSPI5_SIMO[3:0]MIBSPI5_SOMI[3:0]MIBSPI5_nCS[3:0]MIBSPI5_nENA

LIN_RXLIN_TX

SCI_RXSCI_TX

IOMM

PMM

VIM

RTI

DCC1

DCC2

3MFlashwithECC ETM-R4RTP

64K

64K64K64K

KLC

PT

R

AN

EnP

TR

CN

YS

PT

R

]0:51[AT

AD

PT

R

NIKL

CE

CA

RT

KLC

EC

AR

T

LT

CE

CA

RT

]0:13[AT

AD

MT

E

KLC

MM

DA

NEn

MM

D

CN

YS

MM

D

]0:51[AT

AD

MM

D256KRAMwithECC

MDCLKMDIO

MII_RXD[3:0]MII_RXER

MII_TXD[3:0]MII_TXEN

MII_TXCLKMII_RXCLK

MII_CRSMII_RXDV

MII_COL

EMIF

EMIF_CLKEMIF_CKEEMIF_nCS[4:2]EMIF_nCS[0]EMIF_ADDR[21:0]EMIF_BA[1:0]EMIF_DATA[15:0]EMIF_nDQM[1:0]EMIF_nOEEMIF_nWEEMIF_nRASEMIF_nCASEMIF_nRW

EMIF_nWAIT

DA

SS

VD

AC

CV

LC

S_C2I

AD

S_C2I

1X

R_Y

AR

F1

XT_

YA

RF

1N

EX

T_Y

AR

F

2X

R_Y

AR

F2

XT_

YA

RF

2N

EX

T_Y

AR

F

]0:7[B

OIG

]0:7[A

OIG

]61,81[2T

EH2

N

]0:51[2T

EH2

N

]0:13[1T

EH2

N

DA

CC

VD

AS

SV

IH

FE

RD

A

OLF

ER

DA

TV

E1D

A]0:7[

NI1D

A]8:32[

NI1D

A

]0:51[NI2

DA

TV

E2D

A

IH

FE

RD

A

OLF

ER

DA

# 1# 2

# 1Core/RAM RAMCore

# 5

# 3

SYSnPORRSTnRSTECLK

ESM nERROR

SIDn_

NIP_1

TE

H2N

SIDn_

NIP_2

TE

H2N

8 | Enhanced Products Guide 2015 Texas Instruments

Featured ProductsMicrocontrollers (MCUs)

MSP430™ MicrocontrollersMSP430F5438A-EP

MSP430F5438A-EP block diagram

Key features• Low Supply Voltage Range: 3.6 V

Down to 1.8 V• 16-Bit RISC Architecture• Temperature range -55°C to +125°C

Applications• Handheld military devices requiring• low power• Avionics• Industrial• Control and monitoring equipment• High-temperature electronics• Metering equipment

Get more information: www.ti.com/product/MSP430F5438A-EP

The MSP430F5438A-EP is an ultralow-power microcontroller. The architecture, combined with extensive low-power modes, is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The digitally controlled oscillator (DCO) allows wake-up from low-power modes to active mode in 3.5 µs (typical). The MSP430F5438A-EP is a microcontroller configuration with three 16-bit timers, a high performance 12-bit analog-to-digital (A/D) converter, up to four universal serial communication interfaces (USCI), hardware multi-plier, DMA, real-time clock module with alarm capabilities, and up to 87 I/O pins.

UnifiedClock

System256KB192KB128KB

Flash

16KB

RAMMCLK

ACLK

SMCLK

P1/P2

InterruptCapability

PA

CPUXV2and

WorkingRegisters

EEM

XIN XOUT

JTAG/

InterfaceSBW

PA PB PC PD

DMA

XT2IN

2 TUOTX

PE

PowerManagement

LDOSVM/Brownout

SVS

SYS

Watchdog

PF

P3/P4

PB

P5/P6

PC

P7/P8

PD

P9/P10

PE

P11

PF

MPY32

TA0

Timer_A

Registers

TA1

Timer_A

Registers

TB0

Timer_B

Registers

RTC_A CRC16

USCI0,1,2,3

USCI_Ax:UART,

UCSI_Bx:

ADC12_A

Autoscan

DVCC DVSS AVCC AVSSP1.x P2.x P3.x P4.x P5.x P6.x P7.x P8.x P9.x P10.x P11.x

RST/NMI

MAB

MDB

REF

Texas Instruments Enhanced Products Guide 2015 | 9

Featured ProductsPower Management

Get more information: www.ti.com/product/UCD9222-EP

UCD9222-EP functional block diagram

Digital Power ControlUCD9222-EP

The UCD9222 is a two-rail synchronous buck digital PWM controller designed for non-isolated DC/DC power applications. This device integrates dedicated circuitry for DC/DC loop management with support for up to two VID interfaces. Additionally, the UCD9222 has flash memory and a serial interface to support configurability, monitoring and management.

Key features• Switching Frequencies Up to 2MHz

With 250 ps Duty-Cycle• Up To 1mV Closed Loop Resolution• 3-pole/3-zero Compensator• Temperature range -55°C to +115°C

Applications• Networking Equipment• Telecommunications Equipment• FPGA, DSP, and Memory Power

12-bitADC

260 ksps Osc

ARM-7 core

EAp2

EAn2

CS1A

CS2A

VinMonIinMon/AuxADC4Vtrack/AuxADC3Temp2/AuxADC2Temp1/AuxADC1

V33x

xGnd

Analog Front End(AFE)

RefADC6 bit

IIR3P/3Z

ErrAmp

EAp1

EAn1

Coeff.Regs

CompensatorAnalog Front End

POR/BOR

Ref 1

Analog Comparators

OCDPWM1

PMBus_ClkPMBus_DataPMBus_AlertPMBus_Cntrl

5

6

BPCap

VID1A

VID1B

VID1C

VID1S

VID2A

VID2B

VID2C

VID2S

VID1 - 2

Compensator3P/3Z IIR

FlashMemory with

ECC

DiffAmp

Fusion Power Peripheral 2

Fusion Power Peripheral 1

InternalTemp Sense

3.3V reg.controller

& 1.8Vregulator

Ref 2

DigitalHigh Res

PWM

DigitalHigh Res

PWM

TCKTDITDOTMSRCKnTRST

OCDPWM2

nRESET

Addr0Addr1

DPWM2A

FLT2A

DPWM1A

FLT1A

SyncIn/JTAG_TDISyncOut/JTAG_TDO

JTAG

PowerGoodPG1PG2EN1EN2

GPIO

PMBus

10 | Enhanced Products Guide 2015 Texas Instruments

Part Number Description

Iq per Channel

(max) (mA)Number of Channels

VIO (25°C) (max) (mV)

Total Supply Voltage (V) (max) (+5 V = 5, +/-5 V

= 10) Single SupplyPin/

Package(s)

LM211-EP Differential comparator with strobes 6 1 3 30 — 8SOIC

LM239A-EP Quad differential comparator 0.5 4 2.5 30 — 14SOIC, 14TSSOP

LM293-EP Dual differential comparator 0.5 2 5 30 — 8SOIC

TL331-EP Single Differential Comparator 0.7 1 5 36 Yes 5SOT-23

TLC3702-EP Micropower LinCMOS™ technology-based voltage comparator 0.02 2 5 16 Yes 8SOIC

TLC372-EP LinCMOS dual differential comparator, nanopower 0.15 2 5 16 — 8SOIC

TLV3011-EP 1.8-V, SOT-23 comparator with voltage reference 0.005 1 12 5.5 Yes 6SOT-23

TLV3492A-EP Nanopower, push-pull output comparator 0.002 2 15 5.5 Yes 8SOIC

TLV3701-EP Nanopower, push-pull output comparator 0.001 1 5 16 Yes 5SOT-23

Operational Amplifier

Part Number Description

Iq per Channel

(max) (mA)Number of Channels

VIO (25°C)(max) (mV)

Slew Rate (typ) (V/us)

Total Supply Voltage (V)

(max) (+5 V = 5, +/-5 V = 10)

Pin/ Package(s)

INA149-EP High Common Mode Voltage Difference Amplifier 0.81 1 3.5 5 18 8SOIC

INA159-EP Precision gain of 0.2 level translation difference amplifier 2 1 1.45 15 5.5 8MSOP

INA193A-EP Current shunt monitor: -16 V to +80 V common-mode range 1.3 1 2 1 18 5SOT-23

INA2134-EP Audio Differential Line Receivers, 0dB (G=1) 2.4 2 1 14 36 14SOIC

LM258A-EP Dual operational amplifier 0.6 2 7 0.3 32 8SOIC

LM2902-EP Quad operational amplifier 0.3 4 7 0.5 26 14TSSOP

LT1014D-EP Quad precision operational amplifier 0.55 4 7 0.5 32 16SOIC

MC33078-EP Dual high-speed, low-noise operational amplifier 2.5 2 3 7 10 8SOIC

OPA170-EP 36V, microPower, Rail-to-Rail Output, General Purpose Op Amp 0.145 1 0.25 0.5 36 5SOT

OPA211-EP 1.1nV/rtHz Noise, Low Power, Precision Operational Amplifier 4.5 1 0.18 27 36 8VSSOP

OPA2227-EP High Precision, Low Noise Operational Amplifier 4.3 2 0.1 2.3 36 8SOIC

OPA2314-EP 150C, Low Power Low Noise RRI/O 1.8V CMOS Op-Amp 0.19 2 0.5 1.5 5.5 8SON

OPA2333A-EP 1.8-V micropower CMOS operational amplifier, zero-drift series 0.025 2 0.01 0.16 5.5 8SOIC

OPA333A-EP 1.8-V micropower CMOS operational amplifier, zero-drift series 0.025 1 0.01 0.16 5.5 5SC70

OPA336-EP Single-supply micropower CMOS MicroAmplifier™ operational amplifier in miniature packages 0.035 1 0.5 0.03 5.5 5SOT-23

OPA340-EP Single-supply rail-to-rail MicroAmplifier operational amplifier in miniature packages 0.95 1 0.5 6 5.5 5SOT-23

OPA365-EP 2.2V, 50MHz, Low-Noise, Single-Supply Rail-to-Rail Op Amp 5.5 1 0.1 25 5.5 5SOT-23

THS3201-EP 1.8-GHz, low-distortion current, feedback amplifier 22 1 4 10500 15 8MSOPPowerPAD™

THS4503-EP Wideband, low-distortion, fully differential amplifier 28 1 7 1300 15 8MSOP PowerPAD

TLC2252A-EP Advanced LinCMOS™ technology-based rail-to-rail very low-power operational amplifier 0.063 2 0.85 0.12 16 8SOIC

TLC2254A-EP Advanced LinCMOS technology-based rail-to-rail very low-power operational amplifier 0.063 4 0.85 0.12 16 14SOIC

TLC2272A-EP Advanced LinCMOS technology-based rail-to-rail dual operational amplifier 1.5 2 0.95 3.6 4.4 8SOIC

TLC2274A-EP Advanced LinCMOS technology-based rail-to-rail operational amplifier 1.5 4 0.95 3.6 16 14SOIC, 14TSSOP

TLC2274-EP Advanced LinCMOS technology-based rail-to-rail operational amplifier 1.5 4 2.5 3.6 16 14SOIC

TLE2021A-EP Excalibur™ high-speed, low-power precision operational amplifier 0.3 1 0.4 0.5 40 8SOIC

TLE2021-EP Excalibur high-speed, low-power precision operational amplifier 0.3 1 0.6 0.5 40 8SOIC

TLE2022A-EP Excalibur high-speed, low-power precision operational amplifier 0.3 2 0.4 0.5 40 8SOIC

TLE2022-EP Excalibur high-speed, low-power precision operational amplifier 0.3 2 0.6 0.5 40 8SOIC

Comparators

Selection TablesAmplifiers and Linear

Texas Instruments Enhanced Products Guide 2015 | 11

Selection TablesAmplifiers and Linear

Operational Amplifier (cont.)

Part Number Description

Iq per Channel

(max) (mA)Number of Channels

VIO (25°C) (max) (mV)

Slew Rate (typ) (V/us)

Total Supply Voltage (V)

(max) (+5 V = 5, +/-5 V = 10)

Pin/ Package(s)

TLE2024A-EP Excalibur high-speed, low-power precision operational amplifier 0.3 4 0.85 0.5 40 16SOIC

TLE2024-EP Excalibur high-speed, low-power precision operational amplifier 0.3 4 1.1 0.5 40 16SOIC

TLE2027-EP Excalibur™, low-noise, high-speed, precision operational amplifier 5.3 1 0.1 2.8 38 8SOIC

TLE2141-EP Excalibur low-noise high-speed precision operational amplifier 4.4 1 1.4 45 44 8SOIC

TLE2144-EP Excalibur low-noise, high-speed precision quad operational amplifier 4.4 4 1.4 45 44 16SOIC

TLV2252A-EP Advanced LinCMOS™ technology-based rail-to-rail very low-power operational amplifier 0.15 2 0.85 0.1 16 8SOIC

TLV2254A-EP Advanced LinCMOS technology-based rail-to-rail very low-power operational amplifier 0.034 4 0.85 0.1 16 14SOIC

TLV2371-EP 550-µA/ch, 3-MHz, rail-to-rail input/output operational amplifier 0.56 1 4.5 2 16 5SOT-23

TLV2374-EP 550-µA/ch, 3-MHz, rail-to-rail input/output operational amplifier 0.56 4 4.5 2 16 14SOIC

TLV2462A-EP Low-power, rail-to-rail input/output operational amplifier with shutdown 0.575 2 1.5 1.6 6 8SOIC

TLV2464A-EP Low-power, rail-to-rail, input/output operational amplifier with shutdown 0.9 1 1.5 1.6 6 14SOIC

14TSSOP" 550-µA/ch, 3-MHz, rail-to-rail input/output operational amplifier 0.56 1 4.5 2 16 5SOT-23

TLV2772A-EP 2.7-V high-slew-rate rail-to-rail output operational amplifier with shutdown 2 2 1.6 6, 9 6 8SOIC

TLV2774A-EP 2.7-V, high slew rate rail-to-rail output operational amplifier with shutdown 2 4 2.1 6 5.5 14SOIC

TLV2774-EP 2.7-V, high slew rate rail-to-rail output operational amplifier with shutdown 2 4 2.7 6 5.5 14SOIC

TLV4113-EP Dual high-output drive operational amplifier with shutdown 1 2 3.5 1.57 6 10MSOP PowerPAD™

TL074-EP Quad Low-Noise JFET_Input Op-Amp 2.5 4 9 13 36 14SOIC

TL072-EP Dual Low-Noise JFET_Input Op-Amp 2.5 2 9 13 36 8SOIC

TLV4113-EP Dual high-output drive operational amplifier with shutdown 1 2 3.5 1.57 6 10MSOP PowerPAD

TL074-EP Quad Low-Noise JFET_Input Op-Amp 2.5 4 9 13 36 14SOIC

TL072-EP Dual Low-Noise JFET_Input Op-Amp 2.5 2 9 13 36 8SOIC

THS4032-EP 100-MHz low-noise high-speed amplifier 11 2 2 100 30 8MSOP PowerPAD™

THS4271-EP Low-noise, high slew rate, unity gain, stable voltage feedback amplifier 24 1 14 1000 15 8MSOP PowerPAD

THS4500-EP Wideband, Low-Distortion, Fully Differential Amplifier 40 1 6 2800 15 8MSOP PowerPAD

THS4524-EP Very low power quad channel rail-to-rail output fully differential amplifier 1.25 4 6.5 490 5.5 38TSSOP

Instrumentation Amplifier

Part Number Description Gain (V/V)CMRR (min)

(dB)

Non- Linearity (+/-) (max)

(%)

Output Offset (+/-) (max)

(uV)

Bandwidth at G=100 (min)

(kHz)Pin/

Package

INA129-EP Precision, low-power instrumentation amplifier 1 to 10000 120 0.002 500/G 200 8SOIC

Special Functions

Part Number DescriptionPin/

Package(s)

OPA4872-EP 4:1 high-speed multiplexer 14SOIC

TL441-EP Logarithmic amplifier 16SO

PGA400-EP Programmable Sensor Signal Conditioner w/ Microcontroller 36VQFN

High-Speed Operational Amplifiers

12 | Enhanced Products Guide 2015 Texas Instruments

Selection TablesInterface

Clocks and Timers

Part Number Description VCC (V)No. of

OutputsOutput Drive Input Level Output Level

Static Current

(mA)Pin/

Package(s)

CDC2351-EP 1- to 10-line clock driver with three state outputs 3.3 10 -12/12 LVTTL LVTTL 15 24SSOP

CDCLVP111-EP Low-Voltage 1:10 LVPECL with Selectable Input Clock Driver 2.5, 3.3 10 —CML, LVDS,

LVPECL, SSTL

LVPECL — 32LQFP

CDCP1803-EP 1:3 LVPECL clock buffer with programmable divider 3.3 3 — multiple LVPECL — 24VQFN

CDCV304-EP 200-MHz General-Purpose Clock Buffer, PCI-X Compliant 2.5, 3.3 4 — LVTTL LVTTL — 8TSSOP

CDCVF2310-EP General Purpose Clock Buffer 2.5, 3.3 10 -25/25 LVTTL LVTTL 0.1 24TSSOP

Interface Isolators

Part Number Description

Supply Voltage(s)

(V) Footprint# of

Channels

Insulation Rating (VRMS)

Thermal Shutdown

InputThreshold

Data Rate

(MBPS)Channel

Conf.Prop. Delay (Max) (ns)

Input Noise Filte

Pin/ Package(s)

ISO721M-EP Single 150 MBSPS digital isolator 3.3, 5 ADuM1100 1 1500 No CMOS 150 1/0 16 None 8SOIC

ISO7241A-EP 1-MBPS quad ch, 3/1 digital isolator 3.3, 5 ADuM1401 4 2500 No TTL 1 3/1 80 Yes 16SOIC

Ethernet

Part Number DescriptionTemperature

Range Port CountSupply

Voltage (V)Data Rate (MBPS) LED (#) JTAG1149.1

Pin/ Package

DP83848-EP PHYTER Single Port 10/100 Mb/s Ethernet Physical Layer -55 to 125 Single 3.3 10/100 3 Yes 48HTQFP

Peripheral Driver

Part Number DescriptionOutput Voltage

(Max) (V)Switching Voltage

(Max) (V)Peak Output Current (mA)

Drivers Per Package

Input Compatibility

Delay Time (Typ) (ns)

Pin/ Package

SN65472-EP Dual Peripheral Driver 70 55 500 2 TTL 30 8SOIC

RS-485

Part Number Description

Supply Voltage(s) (Nom) (V)

Signaling Rate (Max) (Mbps)

ICC (Max) (mA) Isolated

Common Mode Range

Number of Nodes

Pin/ Package

SN65HVD1792-EP Fault-Protected RS-485 Transceiver With Extended Common-Mode Range 5 1 6 No -20 to 25 256 14SOIC

1394

Part Number Description SubFamilyIcc Static

(uA)Vcc Core

Voltage (V) 1394 SupportPin/

Package(s)

TSB12LV01B-EP High Performance 1394 3.3V Link Layer Link-Layer controller 88 3.3 1394a 100PZT

TSB12LV21B-EP (PCILynx-2) IEEE 1394 LINK LAYER CONTROLLER Link-Layer controller — 3.3 1394-1995 176PQFP

TSB12LV26-EP Ohci-Lynx Pci-Based Ieee 1394 Host Controller Host Controller — 3.3 1394a 100PQFP

TSB12LV32-EP General Purpose Link-Layer Controller Link-Layer controller 10 3.3 P1394a 100LQFP

TSB41AB3-EP Three-Port Cable Transceiver/Arbiter Physical Layer Controller — 3.3 1394a 80HTQFP PowerPad™

TSB41BA3A-EP Ieee 1394B Three-Port Cable Transceiver/Arbiter Physical Layer Controller — 3.3 1394b, 1394a 80HTQFP PowerPad

TSB41BA3B-EP Ieee 1394B Three-Port Cable Transceiver/Arbiter Physical Layer Controller — 3.3 1394b, 1394a 80HTQFP PowerPad™

TSB43AA82A-EP 1394 Integrated Phy And Link-Layer Controller Link-Layer controller — 3.3 1394a 144 LQFP

TSB43AB21A-EP OHCI PHY/Link-Layer Controller Link-Layer controller — 3.3 1394a 128TQFP

TSB43AB23-EP OHCI PHY/Link-Layer Controller Link-Layer controller — 3.3 1394a 128TQFP, 144LQFP

TSB81BA3-EP Ieee 1394B Three-Port Cable Transceiver/Arbiter Physical Layer Controller — 3.3 1394b, 1394a 80HTQFP PowerPad

TSB82AA2-EP 1394B Ohci-Lynx Controller Link-Layer controller — 3.3 1394b, 1394a 144LQFP

Texas Instruments Enhanced Products Guide 2015 | 13

Selection Tables Data Converters

Analog-to-Digital Converters

Part Number DescriptionRes. (bits)

Sample Rate

(MSPS)

No. of Input

Channels ArchitectureSINAD (dB)

SNR (dB)

SFDR (dB)

DNL +/- LSB

INL +/- LSB

Supply Voltage (V)

Power (mW)

Pin/ Package(s)

ADS1254-EP 24-Bit, 20kHz, Low Power Analog-to-Digital Converter 24 0.02 4 Delta-Sigma — — — 1 — 4.75,5.25 4.36 20SSOP

ADS1258-EP 16-Channel, 125 Ksps 24-Bit Analog-to-Digital Converter 24 0.13 16 Delta-Sigma — — — 1 — 4.75,5.25 42 48QFN, 48QFP

ADS5440-EP 13-bit, 210-MSPS analog-to- digital converter 13 210 1 Pipeline 68 68 80 0.95 1.5 4.75,5.25 2250 80HTQFP

ADS5444-EP 13-bit, 250-MSPS analog-to- digital converter 13 250 1 Pipeline 68 69 73 — — 4.75,5.25 2250 80HTQFP

ADS5463-EP 12-bit, 500-MSPS analog-to- digital converter 12 500 1 Pipeline 65.1 65.2 84 0.95 1.5 4.75,5.25 2250 80HTQFP

ADS5500-EP 14-bit, 125 MSPS, Single Ch. Low Pwr & Superior AC Performance 14 125 1 Pipeline 70 71 84 1.1 8 3, 3.6 780 64HTQFP

ADS6444-EP

Quad channel, 14-bit, 125/105/80/65 MSPS analog-to-digital converter with serial LVDS outputs

14 105 4 Pipeline 72 73 81 2.5 5 3, 3.6 1350 64VQFN

ADS6445-EPQuad Channel, 14 Bit, 125/105/80/65 MSPS ADC with Serial LVDS Outputs

14 125 4 Pipeline 72.3 73.2 83 2.5 5 3, 3.6 1680 64VQFN

ADS1278-EP Octal, 144kHz, Simultaneous Sampling 24-Bit Delta Sigma ADC 24 0.144 8 Delta-Sigma — 111 — 1 4.75, 5.25 530 64HTQFP

THS1206-EP12-bit, 6-MSPS, ADC quad- channel (config.), DSP/up if, integrated 16x FIFO

12 6 4 Pipeline 65 68 71 1 1.8 4.75,5.25 186 32TSSOP

THS1408-EP 14-bit, 8-MSPS, DSP-compatible analog-to-digital converter 14 8 1 Pipeline 70 72 80 1 5 3, 3.6 270 48HTQFP

TLC1543-EP10-bit analog-to-digital converters with serial control and 11 analog inputs

10 0.038 11 SAR — — — 1 1 — 4 20SOIC

TLC2543-EP12-bit ADC with serial control and 11 analog inputs 12-bit 200-kSPS ADC ser.

12 0.066 11 SAR — — — 1 1 4.5, 5.5 5 20SOIC, 20SSOP

TLV1548-EP Low-voltage 10-bit ADC with serial control and 8 analog inputs 10 0.085 8 SAR — — — 1 1 2.7, 5.5 — 20SSOP

TLV2548-EP

12-bit, 200-kSPS ADC serial output, auto powerdown (software and hardware), low power with 8x FIFO with 8 channels

12 0.2 8 SAR 65 — 75 1.2 1.2 3, 5.5 1375 —

TLV2556-EP12-bit, 200-kSPS, 11-channel, low-power serial ADC with internal reference

12 0.2 11 SAR — — — 1 1 2.7, 5.5 — 20TSSSOP

Audio Analog-to-Digital Converters

Part Number Description

Supply Voltage(s)

(V)No. of Inputs

No. of Outputs

Control interface

Pd (typ) (mW)

Resolution (bits)

Additional Features

Sampling Rate (max) (kHz)

Pin/ Package

PCM4202-EP High-Performance, 24-Bit, 216 kHz Sampling Stereo Audio Analog-to-Digital Converter

3.3 V digital, 5V

analog2 0 H/W 300 24 Int. PLL 216 28SSOP

Digital-to-Analog Converters

Part Number DescriptionRes. (bits)

Sample/ Update

Rate (MSPS)

Setting Time (μs)

DAC Channels Architecture

SNR (dB)

SFDR (dB)

DNL +/- LSB

INL +/- LSB

Supply Voltage

(V)Power (mW)

Pin/ Package(s)

DAC5652-EP 10-bit, 275-MSPS, dual digital-to- analog converter 10 275 0.02 2 I-steering 63 80 1 0.5 3, 3.6 290 48TQFP

DAC5662-EP Dual 12-bit, 200-MSPS 12 275 0.02 2 l-steering 73 81 2 2 3, 3.6 330 48TQFP

DAC5672-EP Dual 14-bit, 200-MSPS 14 275 0.02 2 l-steering 77 84 3 4 3, 3.6 330 48TQFP

DAC5675-EP 14-bit, 400-MSPS 14 400 0.012 1 l-steering — 77 2 4 315, 3.6 820 48HTQFP

14 | Enhanced Products Guide 2015 Texas Instruments

Selection Tables Data Converters

Digital-to-Analog Converters (cont.)

Part Number DescriptionRes. (bits)

Sample/ Update

Rate (MSPS)

Setting Time (μs)

DAC Channels Architecture

SNR (dB)

SFDR (dB)

DNL +/- LSB

INL +/- LSB

Supply Voltage

(V)Power (mW)

Pin/Package(s)

DAC5687-EP 16-bit, 500-MSPS, 2x-8x interpolating dual-channel DAC 16 500 0.012 2 l-steering 75 80 3 6 3, 3.6 — 100HTQFP

DAC8830-EP 16-bit, ultra-low-power voltage output 16 1 1 1 R-2R — — 1 1 2.7, 5.5 0.015 8SOIC

DAC8831-EP 16-bit, ultra-low-power voltage output 16 2 1 1 R-2R — — 1 1 2.7, 5.5 0.015 14SOIC

TLV5614-EPQuad, serial-in, programmable settling time, low power, hardware or software powerdown

12 0.102 3 4 String 74 70 1 4 2.7, 5.5 3.6 16TSSOP

TLV5618A-EP Digital-to-Analog Converter with Power Down 12 0.093 3 2 String 76 72 1 4 2.7, 5.5 1.8 8SOIC

TLV5619-EP 12-bit, single-channel DAC, parallel, voltage out, low power 12 1 1 1 String 78 72 1 4 2.7, 5.5 4.3 20SOIC

TLV5638-EP12-bit, 1-µs serial input dual DAC, programmable internal reference, settling time 12-bit, 1 or 3.5 µs

12 0.233 1 2 String 74 72 1 4 2.7, 5.5 4.5 8SOIC

Digital-to-Analog Audio Converters

Part Number DescriptionSNR (typ)

(dB) DAC (#)Sampling Rate

(max) (kHz)Resolution

(bits)Digital Audio

Interface Control InterfacePd (Typ)

(mW)Pin/

Package

PCM4104-EP 118dB SNR 4-channel audio DAC 118 4 192 24 I2S TDM H/W SPI 200 48TQFP

Video Decoder

Part Number DescriptionSupply Voltage

(V)Input

FormatOutput Format

Analog Inputs

Input Standard(s) ADC

Output Standards

Pin/Package

TVP5150AM1-EP

Ultra-low-power NTSC/PAL/SECAM video decoder w/robust sync detector 3.3 CVBS

S-Video8bit 4:2:2

YCbCr 2 NTSC/PAL/ SECAM 9-bit 20MHz ITU-R BT.656 32TQFP

Digital-to-Analog Video Converters

Part Number DescriptionRes. (bits)

Sample Rate (MSPS)

Analog Supply

Voltage (V) DAC (#) Input FormatOutput Format Output Standards

Pin/ Package

THS8200-EP Triple 10 Bit All Format Video DAC 10 205 3.3 3

1, 2x8/10-bit 4:2:2, 3x8/10-bit 4:4:4

YCbCr/RGB, 15/16-bit RGB

Analog RGB/YPbPr

YPbPr SDTV/HDTV (I/P), VESA(to

UXGA@75Hz), ITU-R BT.656

80HTQFP

Power ManagementDC/DC Controllers

Part Number DescriptionVin (min)

(V)Vin (max)

(V)Duty Cycle (max) (%)

Iout (max) (A)

Iq (typ) (mA)

Switching Frequency (max) (kHz) Type

Pin/ Package(s)

TL1451A-EP Dual pulse-width-modulation control circuits 3.6 50 100 3 1.7 500 Non- synchronous 16SOIC

TPS40021-EPLow Input (2.25V-5.5V) up to 1MHz Frequency, Sync. Buck Controller, source/sink

2.25 5.5 95 20 2 300 Synchronous 16HTSSOP

TPS40055-EP Wide-input synchronous buck controller 8 40 94 20 1.5 1000 Synchronous 16HTSSOP

TPS40170-EP 4.5 V to 60 V Wide-Input Synchronous PWM Buck Controller 4.5 60 95 6 4.5 600 Synchronous 20VQFN

TPS40200-EP Wide-input-range non-synchronous voltage- mode controller 4.5 52 90 3 1.5 500 Non- synchronous 8SOIC

TPS51116-EP DDR1, DDR2, DDR3 Switcher and LDO 3 28 — 3.8 — 400 Synchronous 20HTSSOP

TPS5120-EP Dual-output two-phase synchronous buck DC/ DC controller 4.5 28 100 1.5 1.1 500 Synchronous 30TSSOP

Texas Instruments Enhanced Products Guide 2015 | 15

Selection TablesPower Management

LDOs

Part Number DescriptionRegulated

outputs (No.)

Output voltage

options (V)

Vin (min)

(V)

Vin (max)

(V)

Iout (max)

(A)Iq (typ) (mA)

Pin/ Package(s)

TPS70345-EP Dual-output low-dropout voltage regulators with power-up sequencing 2 1.2, 3.3 2.7 6 2.35 0.25 24HTSSOP

TPS70751-EP Dual-output low-dropout voltage regulators with power-up sequencing 2 1.8, 3.3 2.7 6 0.25 0.187 20HTSSOP

TPS71202-EP Dual, 250-mA output, ultra-low-noise, high PSRR, low- dropout linear regulator 2 Adj. — — — — 10SON

TPS71501-EP 50-mA, 24-V, 3.2-µA supply current, low-dropout linear regulator 1 Adj. 2.5 24 0.05 0.003 5SC70

TPS72118-EP Low-input voltage, cap-free, 150-mA low-dropout linear regulators 1 1.8 1.8 5.5 0.15 850 5SOT-23

TPS73101-EP Low Dropout Regulator 1 Adj. 1.7 5.5 0.15 0.4 5SOT-23

TPS731125-EP Cap-Free, NMOS, 150 mA Low Dropout Regulator with Reverse Current Protect 1 1.25 1.7 5.5 0.15 0.4 5SOT-23

TPS73115-EP Low Dropout Regulator 1 1.5 1.7 5.5 0.15 0.4 5SOT-23

TPS73118-EP Low Dropout Regulator 1 1.8 1.7 5.5 0.25 0.4 5SOT-23

TPS73125-EP Low Dropout Regulator 1 2.5 1.7 5.5 0.15 0.4 5SOT-23

TPS73130-EP Low Dropout Regulator 1 3 1.7 5.5 0.15 0.4 5SOT-23

TPS73132-EP Low Dropout Regulator 1 3.2 1.7 5.5 0.15 0.4 5SOT-23

TPS73133-EP Low Dropout Regulator 1 3.3 1.7 5.5 0.15 0.4 5SOT-23

TPS73150-EP Low Dropout Regulator 1 5 1.7 5.5 0.15 0.4 5SOT-23

TPS73201-EP Low Dropout Regulator 1 Adj. 1.7 5.5 0.25 0.4 5SOT-23

TPS73215-EP Low Dropout Regulator 1 1.5 1.7 5.5 0.25 0.4 5SOT-23

TPS73216-EP Low Dropout Regulator 1 1.6 1.7 5.5 0.25 0.4 5SOT-23

TPS73218-EP Low Dropout Regulator 1 1.8 1.7 5.5 0.25 0.4 5SOT-23

TPS73225-EP Low Dropout Regulator 1 2.5 1.7 5.5 0.25 0.4 5SOT-23

TPS73230-EP Low Dropout Regulator 1 3 1.7 5.5 0.25 0.4 5SOT-23

TPS73233-EP Low Dropout Regulator 1 3.3 1.7 5.5 0.25 0.4 5SOT-23

TPS73250-EP Low Dropout Regulator 1 5 1.7 5.5 0.25 0.4 5SOT-23

TPS73601-EP Cap-Free, NMOS, 400mA Low Dropout Regulator with Reverse Current Protect 1 Adj. 1.7 5.5 0.4 0.4

5SOT-23; 8SON; 6SOT-

223

TPS73615-EP Cap-Free, NMOS, 400mA Low Dropout Regulator with Reverse Current Protect 1 1.5 1.7 5.5 0.4 0.4 5SOT-23

TPS73618-EP Cap-Free, NMOS, 400mA Low Dropout Regulator with Reverse Current Protect 1 1.8 1.7 5.5 0.4 0.4 5SOT-23

TPS73625-EP Cap-Free, NMOS, 400mA Low Dropout Regulator with Reverse Current Protect 1 2.5 1.7 5.5 0.4 0.4 5SOT-23

TPS73630-EP Cap-Free, NMOS, 400mA Low Dropout Regulator with Reverse Current Protect 1 3 1.7 5.5 0.4 0.4 5SOT-23

TPS73632-EP Cap-Free, NMOS, 400mA Low Dropout Regulator with Reverse Current Protect 1 3.2 1.7 5.5 0.4 0.4 5SOT-23

TPS73633-EP Cap-Free, NMOS, 400mA Low Dropout Regulator with Reverse Current Protect 1 3.3 1.7 5.5 0.4 0.4 5SOT-23

TPS74401-EP Single Output LDO, 3.0A, Adj (0.8 to 3.3V), Fast Trans. Resp. Programmable 1 Adj. 0.9 5.5 3 3 20VQFN

TPS75125-EP Fast transient response 1.5-A low-dropout voltage regulator with power good 1 2.5 2.7 5.5 1.5 0.075 20HTSSOP

TPS75201-EP Fast- Transient-Response 2A LDO – EP 1 Adj. 2.7 5.5 2 0.07 20HTSSOP

TPS75201M-EP Fast- Transient-Response 2A LDO – EP 1 Adj. 2.7 5.5 2 0.07 20HTSSOP

TPS75215-EP Fast-Transient-Response 2A LDO – EP 1 1.5 2.7 5.5 2 0.07 20HTSSOP

TPS75218-EP Fast-Transient-Response 2A LDO – EP 1 1.8 2.7 5.5 2 0.07 20HTSSOP

TPS75225-EP Fast-Transient-Response 2A LDO – EP 1 2.5 2.7 5.5 2 0.07 20HTSSOP

TPS75233-EP Fast-Transient-Response 2A LDO – EP 1 3.3 2.7 5.5 2 0.07 20HTSSOP

TPS75301-EP Fast-Transient-Response 1.5A LDO – EP 1 Adj. 2.7 5.5 1.5 0.07 20HTSSOP

TPS75315-EP Fast-Transient-Response 1.5A LDO – EP 1 1.5 2.7 5.5 1.5 0.07 20HTSSOP

TPS75318-EP Fast-Transient-Response 1.5A LDO – EP 1 1.8 2.7 5.5 1.5 0.07 20HTSSOP

TPS75325-EP Fast-Transient-Response 1.5A LDO – EP 1 2.5 2.7 5.5 1.5 0.07 20HTSSOP

TPS75333-EP Fast-Transient-Response 1.5A LDO – EP 1 3.3 2.7 5.5 1.5 0.07 20HTSSOP

TPS76701-EP Fast-Transient-Response 1A LDO – EP 1 Adj. 2.7 10 1 0.08 20HTSSOP

16 | Enhanced Products Guide 2015 Texas Instruments

Selection TablesPower Management

LDOs (cont.)

Part Number DescriptionRegulated

outputs (No.)

Output voltage

options (V)

Vin (min) (V)

Vin (max)

(V)

Iout (max)

(A)Iq (typ) (mA)

Pin/ Package(s)

TPS76715-EP Fast-Transient-Response 1A LDO – EP 1 1.5 2.7 10 1 0.08 20HTSSOP

TPS76718-EP Fast-Transient-Response 1A LDO – EP 1 1.8 2.7 10 1 0.08 20HTSSOP

TPS76725-EP Fast-Transient-Response 1A LDO – EP 1 2.5 2.7 10 1 0.08 20HTSSOP

TPS76733-EP Fast-Transient-Response 1A LDO – EP 1 3.3 2.7 10 1 0.08 20HTSSOP

TPS76750-EP Fast-Transient-Response 1A LDO – EP 1 5 2.7 10 1 0.08 20HTSSOP

TPS767D301-EP Dual-output low-dropout voltage regulators 2 Adj., 3.3 2.7 10 1 0.085 28HTSSOP

TPS76801-EP 1A Micropower LDO Voltage Regulator – EP 1 Adj 2.7 10 1 0.08 20HTSSOP

TPS76815-EP 1A Micropower LDO Voltage Regulator – EP 1 1.5 2.7 10 1 0.08 20HTSSOP

TPS76818-EP 1A Micropower LDO Voltage Regulator – EP 1 1.8 2.7 10 1 0.08 20HTSSOP

TPS76825-EP 1A Micropower LDO Voltage Regulator – EP 1 2.5 2.7 10 1 0.08 20HTSSOP

TPS76833-EP 1A Micropower LDO Voltage Regulator – EP 1 3.3 2.7 10 1 0.08 20HTSSOP

TPS76850-EP 1A Micropower LDO Voltage Regulator – EP 1 5 2.7 10 1 0.08 20HTSSOP

TPS76901-EP Ultra-low-power, 100mA low-dropout linear regulator 1 1.2 to 5.5 2.7 10 0.1 0.018 5SOT

TPS77401-EP 250-mA low-dropout voltage regulator with power-good output 1 Adj. 2.7 10 0.25 0.09 8MSOP

TPS77501-EP 500 mA LDO Voltage Regulator – EP 1 Adj. 2.7 10 0.5 0.08 20HTSSOP

TPS77515-EP 500 mA LDO Voltage Regulator – EP 1 1.5 2.7 10 0.5 0.08 20HTSSOP

TPS77518-EP 500 mA LDO Voltage Regulator – EP 1 1.8 2.7 10 0.5 0.08 20HTSSOP

TPS77525-EP 500 mA LDO Voltage Regulator – EP 1 2.5 2.7 10 0.5 0.08 20HTSSOP

TPS77533-EP 500 mA LDO Voltage Regulator – EP 1 3.3 2.7 10 0.5 0.08 20HTSSOP

TPS77601-EP 500 mA LDO Voltage Regulator – EP 1 Adj. 2.7 10 0.5 0.08 20HTSSOP

TPS77615-EP 500 mA LDO Voltage Regulator – EP 1 1.5 2.7 10 0.5 0.08 20HTSSOP

TPS77618-EP 500 mA LDO Voltage Regulator – EP 1 1.8 2.7 10 0.5 0.08 20HTSSOP

TPS77625-EP 500 mA LDO Voltage Regulator – EP 1 2.5 2.7 10 0.5 0.08 20HTSSOP

TPS77633-EP 500 mA LDO Voltage Regulator – EP 1 3.3 2.7 10 0.5 0.08 20HTSSOP

TPS79101-EP Ultra Low Noise High PSRR 100 mA – EP 1 Adj. 2.7 5.5 0.1 0.17 6SOT-23

TPS79118-EP Ultra Low Noise High PSRR 100 mA – EP 1 1.8 2.7 5.5 0.1 0.17 5SOT-23

TPS79133-EP Ultra Low Noise High PSRR 100 mA – EP 1 3.3 2.7 5.5 0.1 0.17 5SOT-23

TPS79147-EP Ultra Low Noise High PSRR 100 mA – EP 1 4.7 2.7 5.5 0.1 0.17 5SOT-23

TPS79301-EP Ultra Low Noise High PSRR 200 mA – EP 1 Adj. 2.7 5.5 0.2 0.17 5SOT-23

TPS79318-EP Ultra-low-noise, high PSRR, fast RF, 200-mA low-dropout linear regulator 1 1.8 2.7 5.5 0.2 0.17 5SOT-23

TPS79325-EP Ultra Low Noise High PSRR 200 mA – EP 1 2.5 2.7 5.5 0.2 0.17 5SOT-23

TPS79333-EP Ultra Low Noise High PSRR 200 mA – EP 1 3.3 2.7 5.5 0.2 0.17 5SOT-23

TPS793475-EP Ultra Low Noise High PSRR 200 mA – EP 1 4.75 2.7 5.5 0.2 0.17 5SOT-23

TPS79718-EP Ultra-low-power, 10 mA low-dropout linear regulators with power good 1 1.8 2 5.5 0.01 0.005 5SC70

TPS79730-EP Ultra-low-power, 10-mA low-droput linear regulators with programmable output 1 3 1.8 5.5 0.01 0.005 5SC70

TPS7A3001-EP Vin -3V to -36V, -200mA, Ultra-Low Noise, High PSRR, Low-Dropout 1 Adj. -36 -3 0.2 0.05 8MSOP PowerPADTM

TPS7A7200-EP 2-A, Fast-Transient, Low-Dropout Voltage Regulator 1 Adj. 1.5 6.5 2 4 20VQFN

UC2832-EP Precision low-dropout linear controllers 1 2 3.3 36 0.1 3.3 16SOIC

UCC284-EP Single-output LDO, 500-mA, fixed (5 V), low quiescent current, wide input voltage range — -5 -5.2 -16 0.5 0.2 8SOIC

Texas Instruments Enhanced Products Guide 2015 | 17

Selection TablesPower Management

MOSFET Drivers

Part Number DescriptionRise Time

(ns)Peak Output Current (A)

No. of Outputs

Input Threshold

Driver Configuration

Vcc (min)

(V)

Vcc (max)

(V)

Prop Delay (ns)

Fall Time (ns)

Pin/ Package(s)

TPS2818-EP Inverting high-speed MOSFET driver with internal regulator 25 2 1 CMOS Inverting 5 14 50 35 5SOT-23

TPS2819-EP Non-inverting high-speed MOSFET driver with internal regulator 25 2 1 CMOS Non-Inverting 5 14 50 35 5SOT-23

TPS2041B-EP Single-channel current-limited power distribution switch 600000 1.55 1 CMOS - 2.7 5.5 - 200000 5SOT-23

UCC27322-EP Single 9-A High Speed Low-Side MOSFET Driver With Enable 35 9 2 CMOS, TTL Non-Inverting 4 15 30 20 8SOIC, 8VSSOP

UCC27423-EP Dual 4A, MOSFET driver with enable 20 4 2 CMOS Inverting 4 15 30 15 8SOIC

UCC27424-EP Dual 4A, high-speed, low-side MOSFET driver with enable 20 4 2 CMOS Non-Inverting 5 15 25 15 8MSOP

PowerPAD™

UCC27512-EPSingle Channel High-Speed, Low-Side Gate Driver (With 4-A/8-A Peak Source/Sink)

9 8 TTL Inverting, Non-Inverting 4.5 18 13 7 6SON

Multi-Channel IC (PMIC) Solutions

Part Number DescriptionRegulated outputs

(No.) LDOVin

(min) (V)Vin

(max) (V)Processor

Name

Step-Down DC/DC

ControllerPin/

Package

TPS75003-EP Triple supply power management IC for powering FPGAs and DSPs 3 1 2.2 6.5 Altera,

Xilinx 2 20QFN

Power Factor Correction ICs

Part Number Description

Practical Operating Frequency

(max) (MHz)

Duty Cycle (max) (%)

Startup Current

(mA)Vref tol

(%) Vref (V)

Operating Supply

Current (mA)

Operating Supply (max)

(V)

UVLO Thresholds On/Off (V)

Pin/ Package(s)

UC2854B-EP Advanced high-power factor preregulator 0.2 95 0.25 1.3 7.5 12 20 10.5/10 16SOIC

UCC2818-EP BiCMOS power factor preregulator 0.25 100 0.15 1.5 7.5 4 18 10.5/10 16SOIC

PWM Power Driver

Part Number Description Vs (min) (V) Vs (max) (V)Iq (max)

(mA)

Saturation Voltage

(max) (V)Output Current

(min) (A)Pin/

Package(s)

DRV401-EP Sensor signal conditioning for close- loop magnetic current sensor 4.5 5.5 6.8 0.4 0.2 20SO PowerPAD™

20VQFN

UCD7242-EP Digital Dual Synchronous-Buck Power Driver 4.75 18 — — — 32QFN

PWM Power Supply Controllers

Part Number Description Topology

PWM Outputs

(#)

UVLO Thresholds On/Off (V) Control Method

Frequency (max) (kHz)

Duty Cycle (max) (%)

Pin/ Package(s)

UC1842A-EP Current-mode PWM controller Boost, Flyback, Forward 1 16/10 Current mode 500 100 8SOIC

UC1843A-EP Current-mode PWM controller Boost, Flyback, Forward 1 8.5/7.9 Current mode 500 100 8SOIC

UC1844A-EP Current-mode PWM controller Boost, Flyback, Forward 1 16/10 Current mode 500 50 8SOIC

UC1845A-EP Current-mode PWM Controller Boost, Flyback, Forward 1 8.5/7.9 Current mode 500 50 8SOIC

UC1846-EP Current-mode PWM controller Boost, Flyback, Forward, Full-Bridge, Half-Bride, Push-Pull 2 7.7/6.95 Current mode 450 50 16SOIC

UCC2800-EP Low-power BiCMOS current-mode PWM Boost, Flyback, Forward 1 7.2/6.9 Current mode 1000 100 8SOIC

UCC2801-EP Low-power BiCMOS current-mode PWM Boost, Flyback, Forward 1 9.4/7.4 Current mode 1000 50 8SOIC

UCC2802-EP Low-power BiCMOS current-mode PWM Boost, Flyback, Forward 1 12.5/8.3 Current mode 1000 100 8SOIC

UCC2803-EP Low-power BiCMOS current-mode PWM Boost, Flyback, Forward 1 4.1/3.6 Current mode 1000 100 8SOIC

UCC2804-EP Low-power BiCMOS current-mode PWM Boost, Flyback, Forward 1 12.5/8.3 Current mode 1000 50 8SOIC

UCC2805-EP Low-power BiCMOS current-mode PWM Boost, Flyback, Forward 1 4.1/3.6 Current mode 1000 50 8SOIC

UCC2808A-1EP Low-power current mode push-pull PWM Full-Bridge, Half- Bridge, Push-Pull 2 12.5/8.3 Current mode 1000 50 8SOIC

UCC2808A-2EP Low-power current mode push-pull PWM Full-Bridge, Half- Bridge, Push-Pull 2 4.3/4.1 Current mode 1000 50 8SOIC

UC2825A-EP High-speed PWM controller Boost, Flyback, Forward, Full-Bridge, Half-Bride, Push-Pull 2 9.6 Current mode,

Voltage mode 1000 50 16SOIC

18 | Enhanced Products Guide 2015 Texas Instruments

Selection TablesPower Management

PWM Power Supply Controllers (cont.)

Part Number Description Topology

PWM Outputs

(#)

UVLO Thresholds On/Off (V)

Control Method

Frequency (max) (kHz)

Duty Cycle (max) (%)

Pin/ Package(s)

UC2875-EP Phase shift resonant controller Full-Bridge 4 10/7/9.2 Current mode, Voltage mode 1000 100 28SOIC

UCC2895-EP BiCMOS advanced phase shift PWM controller Full-Bridge 4 11.8/9.8 Current mode 527 100 20SOIC

UCC28C43-EP Low-power BiCMOS current-mode PWM Boost Buck FlybackForward 1 8.4/7.6 Current mode 1000 100 8SOIC

UCC28C45-EP Low-power BiCMOS current-mode PWM Boost Buck Flyback Forward 1 8.4/7.6 Current mode 1000 50 8SOIC

SWIFT™ DC/DC Converters

Part Number DescriptionVin (min)

(V)Vin(max)

(V)Vout (min)

(V)Vout (max)

(V)Preset

Vout (V)Iout

(max) (A)

Switching Frequency

(max) (kHz)Pin/

Package(s)

TPS54010-EP 2.2-V to 4-V, 14-A Output Synchronous Buck PWM Switcher with integrated FETs (SWIFT) 2.2 4 0.9 — — 14 550 28HTSSOP

TPS5410-EP 5.5V to 36-V, 1A, 500-kHz step-down SWIFT converter 5.5 36 1.23 31 — 1 500 8SOIC

TPS5420-EP 5.5V to 36V, 2A, 500-kHz step-down SWIFT converter 5.5 36 1.23 31 — 2 500 8SOIC

TPS5430-EP 5.5V to 36V, 3A, 500-kHz step-down SWIFT converter 3.6 5.5 1.23 31 — 3 500 8MSOP PowerPAD™

TPS54310-EP 3V to 6V, 3A Synchronous Step Down SWIFT converter 3 6 0.9 3.3 — 3 700 20HTSSOP

TPS54311-EP 3V to 6V, 3A output synchronous-buck PWM switcher with integrated FETs 3 6 — — 0.9 3 700 20HTSSOP

TPS54312-EP 3V to 6V, 3A output synchronous-buck PWM switcher with integrated FETs 3 6 — — 1.2 3 700 20HTSSOP

TPS54313-EP 3V to 6V, 3A output synchronous-buck PWM switcher with integrated FETs 3 6 — — 1.5 3 700 20HTSSOP

TPS54314-EP 3V to 6V, 3A output synchronous-buck PWM switcher with integrated FETs 3 6 — — 1.8 3 700 20HTSSOP

TPS54315-EP 3V to 6V, 3A output synchronous-buck PWM switcher with integrated FETs 3 6 — — 2.5 3 700 20HTSSOP

TPS54316-EP 3V to 6V, 3A output synchronous-buck PWM switcher with integrated FETs 3 6 — — 3.3 3 700 20HTSSOP

TPS54350-EP 4.5V to 20V input, 3A output synchronous PWM switcher with integrated FET 4.5 20 0.891 12 — 3 700 16HTSSOP

TPS54354-EP 4.5V to 20V input, 3A output synchronous PWM switcher with integrated FET 4.5 20 — — 1.8 3 600 16HTSSOP

TPS54356-EP 4.5V to 20V input, 3A output synchronous PWM switcher with integrated FET 5.5 20 — — 3.3 3 600 16HTSSOP

TPS5450-EP 5.5V to 36V, 5A, 500kHz Step Down SWIFT converter 5.5 36 1.22 31 — 5 500 8MSOP PowerPAD

TPS54610-EP 3V to 6V, 6A output synchronous buck PWM switcher with integrated FETs 3 6 0.9 4.5 — 6 700 28HTSSOP

TPS54613-EP 3V to 6V input, 6A output synchronous buck PWM switcher with integrated FETs 3 6 — — 1.5 6 700 28HTSSOP

TPS54615-EP 3V to 6V input, 6A output synchronous buck PWM switcher with integrated FETs 3 6 — — 2.5 6 700 28HTSSOP

TPS54680-EP 3V to 6V Input, 6A output tracking synchronous buck PWM switcher 3 6 0.9 3.3 — 6 700 28HTSSOP

TPS61222-EP Low Input Voltage, 0.7V, Boost Converter with 5.5µA Quiescent Current 0.7 5.5 — — 5 — 200 6SC70

TPS62110-EP 17V, 1.5A synchronous step-down converter 3.1 17 1.153 16 — 1.5 1000 16QFN

TPS62111-EP 17V, 1.5A synchronous step-down converter 3.1 17 3.8 17 — 1.5 1000 16QFN

TPS62112-EP 17V, 1.5A synchronous step-down converter 3.1 17 5.5 17 — 1.5 1000 16QFN

Texas Instruments Enhanced Products Guide 2015 | 19

Selection TablesPower Management

Supervisory Circuits (Voltage Supervisors)

Part Number DescriptionNo. of

SupervisorsVit1 (typ)

(V)Vit2 (typ)

(V)Programmable

DelayManual Reset

Reset Active Low

IDD (typ) (uA)

Pin/ Package(s)

TLC7701-EP Micropower supply voltage supervisor 1 Adj — — — Yes 9 8SOIC, 8TSSOP

TLC7705-EP Micropower supply voltage supervisor 1 4.5 — — — Yes 9 8TSSOP

TLC7733-EP Micropower supply voltage supervisor 1 2.93 — — — Yes 9 8TSSOP

TPS3106-EP Ultra-low supply-current/supply-voltage supervisory circuit 2 2.94 Adj — — — 1.2 6SOT-23

TPS3307-18-EP Triple processor supervisors 3 2.93 1.68 — — Yes 15 8SOIC

TPS3307-33-EP Triple processor supervisors 3 4.55 2.93 — — Yes 15 8MSOP PowerPAD™

TPS3619-33-EP Backup-battery supervisors for RAM retention 1 2.93 — — — Yes 15 8MSOP

TPS3620-33-EP Backup-battery supervisors for RAM retention 1 2.93 — — — Yes 15 8MSOP

TPS3803-01-EP Single voltage detector 1 Adj — — — Yes 3 5SC70

TPS3803G15-EP Single voltage detector 1 1.4 — — — Yes 3 5SC70

TPS3805H33-EP Dual voltage detector 2 3.05 Adj — — Yes 3 5SC70

TPS3808-EP Low-quiescent current, programmable delay supervisory circuit 1 Adj — Yes Yes Yes 2.4 6SOT-23

TPS3809I50-EP 3-pin supply voltage supervisor 1 4.55 — — — Yes 9 3SOT-23

TPS3809K33-EP 3-pin supply voltage supervisor 1 2.93 — — — Yes 9 3SOT-23

TPS3809L30-EP 3-pin supply voltage supervisor 1 2.64 — — — Yes 9 3SOT-23

TPS3813K33-EP Processor supervisory circuit with window watchdog 1 2.93 — — — — 9 6SOT-23

TPS3836J25-EP Nanopower supervisory circuit 1 2.25 — — Yes Yes 0.22 5SOT-23

TPS3836L30-EP Nanopower supervisory circuit 1 2.64 — — Yes Yes 0.25 5SOT-23

TPS3837K33-EP Nanopower supervisory circuit 1 2.93 3.3 — Yes — 0.22 5SOT-23

Voltage References

Part Number DescriptionVO(V)

VI (max) (V)

VI (min) (V)

Temp Coeff (max) (ppm/

degree C)Iq (max)

(uA)Iout/Iz (max)

(mA)Pin/

Package(s)

REF3212-EP 4 Ppm/Degreesc 100 Ua Sot23-6 series voltage references 1.25 5.5 1.8 7 120 10 6SOT-23

REF3220-EP 4 Ppm/Degreesc 100 Ua Sot23-6 series voltage references 2.052 — — — 120 — 6SOT-23

REF3225-EP 4 Ppm/Degreesc 100 Ua Sot23-6 series voltage references 2.5 5.5 2.55 7 120 10 6SOT-23

REF3230-EP 4 Ppm/Degreesc 100 Ua Sot23-6 series voltage references 3 5.5 3.05 7 120 10 6SOT-23

REF3233-EP 4 Ppm/Degreesc 100 Ua Sot23-6 Series Voltage References 3.307 — — — 120 — 6SOT-23

REF3240-EP 4 Ppm/Degreesc 100 Ua Sot23-6 series voltage references 4.096 5.5 4.146 7 120 10 6SOT-23

REF5020-EP Low Noise, Very Low Drift, Precision Voltage Reference 2.048 18 2.7 5 1000 — 8SOIC

REF5040-EP Low Noise, Very Low Drift, Precision Voltage Reference 4.096 18 2.7 5 1000 — 8SOIC

REF5050-EP Low Noise, Very Low Drift, Precision Voltage Reference 5 18 5.2 3 1000 10 8SOIC

REF5025-EP Low Noise, Very Low Drift, Precision Voltage Reference 2.5 18 2.7 3 1000 10 8SOIC

TL1431-EP Precision adjustable (programmable) shunt reference — — — 114 — 100 8SOIC

LM4040C25-EP 2.5-V Precision Micropower Shunt Voltage Reference, 0.5% accuracy 2.5 — — 100 — 15 3SOT-23

Special FunctionsPart Number Description Peak Output Current (A) Pin/Package(s)

TLE2426-EP EP - PRECISION VIRTUAL GROUND — 8SOIC

UC2625-EP Brushless DC Motor Controller 0.5 28PDIP, 28SOIC

Battery Management

Part Number Description Cell Chemistry# Series

Cells Vin (Max) (V) Control TopologyCharge Status

OutputsPin/

Package

UC2909-EP Switch-mode Lead-Acid Battery Charger with Differential Current Lead Acid 2-4 40 Switch-Mode 2 20SOIC

20 | Enhanced Products Guide 2015 Texas Instruments

Selection TablePower Management

Digital Power Control

Part Number DescriptionNo. of

OutputsNo. of

PhasesFs (Max)

(kHz)

DPWM Resolution

(ps) CompensatorNon-Volatile

Memory

Operating Temperature Range (°C)

Pin/ Package

UCD9222-EP Digital PWM System Controller with 4-bit, 6-bit, or 8-bit VID Support 2 2 2000 250 3-pole/3-zero Yes w/ECC -55 to 115 48VQFN

Feedback Signal GeneratorPart Number Description Iout (A) Supply Voltage (Min) (V) Supply Voltage (Max) (V) Vref (V) Pin/ Package

UC2901-EP Isolated Feedback Generator 0.015 4.5 40 1.5 14SOIC

Processor PlatformsDigital Signal Processors

Part Number Description CPUFrequency

(MHz) PWM EMIF DMA

Core Supply

(V) McBSP I2C SPI CAN

IO Supply

(V)Pin/

Package(s)

DaVinci™ Video Processors

SM320DM355-EP Digital media system- on-chip (DMSoC)

1 ARM9; DaVinci Video

216 41 16-Bit mDDR/DDR2, 1 8/16-Bit

EMIFA

64-Ch EDMA 1.3 — 1 3 — 1.8 337NFBGA

SM320DM642-EP Video/imaging fixed- point DSP 1 C64; Video — — 1 64-Bit 64-Ch

EDMA 1.4 2 2 — — 3.3 548GDK, 548ZDK

Fixed-Point Digital Signal Processors

SM32C6416T-EP DSP C6416T, 6800 MIPS, 850 MHz 1C64x 600, 720, 850, 1000 — 1 16-bit, 1 64-bit 64-ch

EDMA 1.2 3 — — — 3.3 532FCBGA

SM320C50-EP 320C50, Fixed-pt, 40 MIPS, 80 MHz 1 C50x 66 — 16-bit Ext 5 — — — — 5 132BQFP

SM320C6201-EP Fixed-point DSP 1 C62x 200 — 1 32-Bit 4-Ch 1.8 2 — — — 3.3 352FC/CSP

SM320C6415-EP Fixed-point DSP 1C64x — — 1 16-Bit, 1 64-Ch EDMA — 3 — — — — —

SM320C6424-EP Fixed-point DSP 1 C64x+ 600 31 16/8-Bit

EMIFA, 1 32/16 Bit DDR2

64-Ch EDMA

1.05, 1.2 2 1 — — 1.8, 3.3 376BGA

SM320C6455-EP Fixed-point DSP 1 C64x+ 1000 —1 32-Bit DDR@ EMIF, 1 64- Bit

EMIFA

64-Ch EDMA 1.25 2 2 — — 3.3, 1.8,

1.5, 1.2 697BGA

SM320VC5409-EP Fixed-point DSP 1 C54x 100 — — 6-Ch Ext 1.8 3 — — — 3.3 144BGA MicroStar™

SM320VC5416-EP Digital signal processor 1 C54x 120, 160 — 1 16-Bit 6-Ch Ext 1.5, 1.6 3 — — — 3.3144LQFP, 144BGA

MicroStar

SM320VC5421-EP Digital signal processor 2 C54x 100 — 1 16-Bit 2 6Ch Ext 1.8 6 — — — 3.3 144LQFP

SM320VC5507-EP Fixed-point DSP 1 C55x 108, 144, 200 — 1 16-Bit 6-Ch

1.2, 1.35, 1.6

3 — — — 2.7 to 3.6 144LQFP

SM320VC5510A-EP Fixed-point DSP 1 C55x 200 — 1 32-Bit 6-Ch Int/Ext 1.6 3 — — — 3.3 240BGA

MicroStar

Floating-Point Digital Signal ProcessorsSM320C32-EP 320C32, Floating-pt, 50 MFLOPS 32 bit 50, 60 — 1 8/16/32 - bit 2-ch — — — — — 5 144QFP

SM320C6701-EP Floating-point DSP 1 C67x 167 — 1 32-Bit 4-Ch 1.8 2 — — — 3.3 352FC/CSP

SM320C6711D-EP Floating-point DSP 1 C67x 167, 200 — 1 32-Bit 16-Ch EDMA 1.2 2 — — — 3.3 272BGA

SM320C6712D-EP Floating-point DSP 1 C67x 167 — 1 16-Bit 16-Ch EDMA 1.2 2 — — — 3.3 272BGA

SM320C6713B-EP Floating-point DSP 1 C67x 200, 300 — 1 32-Bit 16-Ch EDMA 1.4 2 2 — — 3.3 272BGA

SM320C6727B-EP Floating-Point Digital Signal Processor 1 C67x 250 — 1 32-Bit dMAX 1.2 — 2 — — 3.3 256BGA

SM320LC31-EP (NRND) Digital Signal Processor 32 bit 40 — — 1-Ch — — — — — 3.3 132PQ

SM320VC33-EP 320VC33, Floating-point, 150 MFLOPS 32 bit 75 — — 1-Ch 2.5, 1.8 — — — — 3.3 144LQFP,

144CBGA

Texas Instruments Enhanced Products Guide 2015 | 21

Selection TablesProcessor Platforms

Digital Signal Processors (cont.)

Part Number Description CPUFrequency

(MHz) PWM EMIF DMA

Core Supply (Volts) McBSP I2C SPI CAN

IO Supply (Volts)

Pin/ Package(s)

OMAP™ Processors

OMAPL138B-EP Low-Power Applications Processor1 C674x; 1 ARM

Cortex-A9345 2-Ch 1 8/16-Bit

EMIFA2 32-Ch EDMA 1-1.3 2 2 2 — 1.8, 3.3 361NFBGA

C2000™ Microcontrollers

SM320F2801-EP 32-bit, digital signal controller with flash 1 C28x 100 8-Ch — — 1.8 — 1 2 1 3.3 100LQFP

SM320F2808-EP 32-bit, digital signal controller with flash 1 C28x 100 16-

Ch — — 1.8 — 1 4 2 33 100LQFP

SM320F2812-EP 32-bit, digital signal controller with flash 1 C28x 150 16-

Ch 1 16-Bit — 1.9 1 — 1 1 3.3176LQFP,179BGA

MicroStar™

SM320F28335-EP Delfino microcontroller 1 C28x 250 18-Ch 1 32/16- Bit 6-Ch

DMA 1.9 2 1 1 2 3.3

176BGA, 176HLQFP,

179BGA MicroStar

SM320LF2407A-EP DSP controller 1 C24x 40 16-Ch — — 3.3 — — 1 2 3.3 144LQFP

Hercules™ and ARM-Based Microcontrollers

TMS570LS20206-EP ARM Cortex-R4F Flash Microcontroller

ARM-Cortex - R4F

140, 160 — 16-Bit 16-Ch 1.5 — — 3 3 3.3 337BGA, 144QFP

TMS570LS20216-EP ARM Cortex-R4F Flash Microcontroller

ARM-Cortex - R4F

140, 160 — 16-Bit 16-Ch 1.5 — — 3 3 3.3 337BGA, 144QFP

TMS570LS3137-EP 16/32-Bit RISC Flash MicrocontrollerARM-Cortex - R4F

180 16-Bit 16-Ch 1.2 — 1 2 3 3.3 337NFBGA

MSP430™ Microcontrollers

Part Number Description Sub FamilyFrequency

(MHz) ADC RAM (kB) GPIOPin/

Package(s)

MSP430F2132-EP 16-bit Ultra-Low-Power Microcontroller, 8kB Flash, 512B RAM, 10 bit ADC, 1 USCI 2xx 16-MHz series 16 10-bit SAR 0.5 24 32VQFN

MSP430F2013-EP 16-bit Ultra-Low-Power Microcontroller, 2kB Flash, 128B RAM, 16-Bit Sigma-Delta A/D 2xx 16-MHz series 16 16-bit Sigma

Delta 0.125 10 16QFN

MSP430F2274-EP 16-bit ultra-low-power microcontroller, 32-KB flash, 1-K RAM 2xx 16-MHz series 16 10-bit SAR 1 32 40VQFN, 38TSSOP

MSP430F249-EP 16-bit ultra-low-power microcontroller, 60-KB flash, 2-KB RAM, 12-bit ADC, 2 USCIs 2xx 16-MHz series 16 12-bit SAR 2 48 64LQFP

MSP430F2618-EP 16-bit ultra-low-power MCU, 92-KB flash, 8-KB RAM, 12-bit ADC, dual DAC, 2 USCIs 2xx 16-MHz series 16 12-bit SAR 8 48, 64 113BGA,

MicroStar™ Junior

MSP430F5328-EP 16-bit Ultra-Low-Power Microcontroller, 128 kB Flash, 10 kB RAM 5xx 25-MHz series 25 12-bit SAR 10 48 64VQFN

MSP430G2230-EP 16-bit Ultra-Low-Power Mixed Signal Microcontroller, 2kB Flash, 128B RAM 2xx 16-MHz series 16 10-bit SAR 0.125 4 8SOIC

MSP430G2231-EP 16-bit Ultra-Low-Power Microcontroller, 2kB Flash, 128B RAM 2xx 16-MHz series 16 10-bit SAR 0.125 10 14TSSOP

MSP430G2302-EP 16-bit Ultra-Low-Power Microcontroller, 4kB Flash, 256B RAM 2xx 16-MHz series 16 — 0.25 16 14TSSOP

MSP430G2332-EP 16-bit Ultra-Low-Power Microcontroller, 4kB Flash, 256B RAM 2xx 16-MHz series 16 10-bit SAR 0.25 16 20TSSOP

22 | Enhanced Products Guide 2015 Texas Instruments

Selection TablesLogic

Buffers, Drivers and Transceivers

Part Number DescriptionNo. of Gates

Static Current

IOL (mA)

Voltage Nodes (V)

Output Drive (mA)

tpd max (ns)

Vcc Range (V)

ICC (uA)

Pin/ Package(s)

Buffers and Drivers

TLC5940-EP 16 Channel LED Driver with DOT Correction and Grayscale PWM Control — — 1 — 72 60, 1000 3.0 to 5.5 16000 28HTSSOP, 32VQFN

SN74ABT244A-EP Octal buffer/driver with 3-state outputs — — — 5 -24/48 — 4.5 to 5.5 — 20SSOP

SN74ABT541B-EP Octal buffer/driver with 3-state outputs — 30 — 5 -32/64 3.5 4.5 to 5.5 — 20TSSOP

SN74AC04-EP Hex inverter 6 0.02 — 5, 3.3 -24/24 7 2.0 to 6.0 — 14SOIC

SN74AC244-EP Octal buffer/driver with 3-state outputs — 0.04 — 5, 3.3 -24/24 7 2.0 to 6.0 — 20SO, 20SOIC

SN74ACT04-EP Hex inverter 6 0.002 — 5 -24/24 8.5 4.5 to 5.5 — 14SOIC

SN74ACT244-EP Octal buffer/driver with 3-state outputs — 0.04 — 5 -24/24 9 4.5 to 5.5 — 20SO, 20SOIC

SN74AHC04-EP Hex inverter 6 0.02 — 5, 3.3 -8/8 8.5 2.0 to 5.5 — 14SOIC, 14TSSOP

SN74AHC125-EP Quadruple bus buffer gates with 3-state outputs 4 0.04 — 5, 3.3 -8/8 8.5 2.0 to 5.5 — 14SOIC, 14TSSOP

SN74AHC14-EP Hex Schmitt-Trigger inverter 6 0.02 — 5, 3.3 -8/8 12 2.0 to 5.5 — 14SOIC, 14TSSOP

SN74AHC244-EP Quadruple bus buffer gate with 3-state outputs 8 0.04 — 5, 3.3 -8/8 8.5 2.0 to 5.5 — 20SOIC, 20TSSOP

SN74AHC245-EP Octal bus transceiver with 3-state outputs — 0.04 — 5, 3.3 -8/8 8.5 2.0 to 5.5 — 20SOIC, 20TSSOP

SN74AHCT125-EP Quadruple bus buffer gate with 3-state outputs — 0.02 — 5 -8/8 8.5 4.5 to 5.5 — 14SOIC, 14TSSOP

SN74AHCT126-EP Quadruple bus buffer gate with 3-state outputs — 0.02 — 5 -8/8 8.5 4.5 to 5.5 — 14SOIC, 14TSSOP

SN74AHCT14-EP Hex Schmitt-Trigger inverter 6 0.02 — 5 -8/8 9 4.5 to 5.5 — 14SOIC, 14TSSOP

SN74AHCT244-EP Octal buffer/driver with 3-state outputs 8 0.04 — 5 -8/8 9.5 4.5 to 5.5 — 20SOIC, 20TSSOP

SN74AHCT541-EP Octal buffer/driver with 3-state outputs 8 0.04 — 5 -8/8 9.5 4.5 to 5.5 — 20SOIC

SN74AHCU04-EP Hex inverter — — — — — — 2 to 5.5 — 14TSSOP

SN74ALVC244-EP Octal buffer/driver with 3-state outputs — 0.01 — 3.3, 2.7, 2.5, 1.8 -24/24 2.8 1.65 to 3.6 — 20TSSOP

SN74AUC1G125-EP Single bus buffer gate with 3-state output — — — — — — — — 5SC70

SN74AUC1G14-EP Single Schmitt-Trigger inverter — — 0.7, 3, 5, 8, 9 — — 2, 4, 4.5,

5.5, 5.8 — 10 5SOT-23

SN74AUC1G14-EP Single Schmitt-Triger inverter — — — — — 2, 4, 4.5, 5.5, 5.8 — — 5SOT-23

SN74AUP1G17-EP Low-power single Schmitt-Trigger buffer — — — — — — 0.8 to 3.6 0.5 5SC70

SN74BCT760-EP Octal buffer/driver with open-collector outputs — — — — — — -0.5 to 7 — 20SOIC

SN74HC244-EP Octal buffer and line driver with 3-state outputs 10 0.16 — 6, 4.5, 2 7.8/7.8 34 2.0 to 6.0 — 20SOIC, 20TSSOP

SN74HCT04-EP Hex inverter 6 0.02 — 5 -4/4 20 4.5 to 5.5 — 14SOIC

SN74HCT244-EP Octal buffer and line driver with 3-state outputs — 0.16 — 5 -6/6 38 4.5 to 5.5 — 20TSSOP

SN74LV04A-EP Hex inverter 6 0.02 — 5, 3.3, 2.5 -12/12 7.5 2.0 to 5.5 — 14TSSOP

SN74LV14A-EP Hex Schmitt-trigger inverter 6 0.02 — 5, 3.3, 2.5 -12/12 14 2.0 to 5.5 — 14SOIC, 14TSSOP

SN74LV244A-EP Octal buffer and line driver with 3-state outputs — — — 5/3.3/2.5 — 8.5 2 to 5.5 — 20SOIC

SN74LVC04A-EP Hex inverter 6 0.01 — 3.3, 2.7 -24/24 4.5 2.0 to 3.6 — 14SOIC, 14TSSOP

SN74LVC06A-EP Hex inverter buffer/driver with open-drain outputs — — — 3.3 — 5 1.65 to 3.6 — 14SOIC

SN74LVC07A-EP Hex buffer/driver with open-drain outputs — 0.01 — 5, 3.3, 2.7, 2.5, 1.8 24 2.6 1.65 to 5.5 — 14TSSOP

SN74LVC125A-EP Quadruple bus buffer gate with 3-state outputs — 0.01 — 3.3, 2.7, 2.5, 1.8 -24/24 4.8 1.65 to 3.6 — 14SOIC, 14TSSOP

SN74LVC14A-EP Hex Schmitt-Trigger inverter 6 0.01 — 3.3, 2.7 -24/24 6.4 2.0 to 3.6 — 14SOIC, 14TSSOP

SN74LVC16244A-EP 16-bit buffer/driver with 3-state outputs — 0.02 — 3.3, 2.7, 2.5, 1.8 -24/24 4.1 1.65 to 3.6 — 48TSSOP

SN74LVC1G04-EP Single inverter gate 1 — — — — — 1.65 to 5.5 10 5SOT-23

SN74LVC1G06-EP Single inverter buffer/driver with open-drain output 1 — — — — — 1.65 to 5.5 — 5SC70

SN74LVC1G07-EP Single buffer/driver with open-drain output — — — — — — — 10 5SC70

SN74LVC1G125-EP Single bus buffer gate with 3-state outputs — — 32 1.8, 2.5, 3.3, 5 4 1.65 to 5.5 10 5SC70

SN74LVC1G126-EP Single bus buffer gate with 3-state outputs 1 — 32 1.8, 2.5 3.3, 5 +\-24 4 1.65 to 5.5 10 5SC70

Texas Instruments Enhanced Products Guide 2015 | 23

Buffers, Drivers and Transceivers (cont.)

Part Number DescriptionNo. of Gates

Static Current

IOL (mA)

Voltage Nodes (V)

Output Drive (mA)

tpd max (ns)

Vcc Range (V)

ICC (uA)

Pin/ Package(s)

SN74LVC1G17-EP Single Schmitt-Trigger buffer — — 32 — +\-24 4.6 up to 6.5 10 5SC70, 5SOT- 23

SN74LVC1G97-EP Configurable multiple-function gate 1 — 32 — — 5.1 1.65 to 5.5 10 6SC70

SN74LVC1G98-EP Configurable multiple-function gate — — 32 — — 5.1 1.65 to 5.5 10 6SC70

SN74LVC1GX04-EP Crystal oscillator driver — — 32 — — 5 1.65 to 5.5 10 6SOT

SN74LVC2G04-EP Dual inverter gate 2 — — — — — 1.65 to 5.5 10 6SC70

SN74LVC2G06-EP Dual inverter buffer/driver with open-drain output 2 — — — — — 1.65 to 5.5 10 6SC70

SN74LVC2G07-EP Dual buffer/driver with open-drain output 2 — 24 5 +24, -24 5.7 1.65 to 5 10 6SC70

SN74LVC2G126-EP Dual Bus Buffer Gate With 3-State Outputs 1 — 24 1.65, 2.3, 3, 4.5 +/- 24 4 1.65 to 5.5 10 8US8

SN74LVC2G17-EP Dual Schmitt-Trigger buffer 2 — — — — — 1.65 to 5.5 10 6SC70

SN74LVC2G34-EP Dual buffer gate — — — — — — 1.65 to 5.5 10 6SC70

SN74LVC3G07-EP Triple buffer/driver with open-drain output — — 32 — — — 1.65 to 5.5 10 8US8

SN74LVC540A-EP Octal buffer/driver with 3-state outputs — 0.01 — 3.3, 2.7 -24/24 5.3 2.0 to 3.6 — 20SOIC, 20TSSOP

SN74LVC541A-EP Octal buffer/driver with 3-state outputs 8 0.01 — 3.3, 2.7, 2.5, 1.8 -24/24 5.1 2.0 to 3.6 — 20SOIC, 20TSSOP

SN74LVT125-EP 3.3-V ABT quadruple bus buffers with 3-state outputs — 7 — 3.3, 2.7 -32/32 4.2 2.7 to 3.6 — 14TSSOP

SN74LVTH125-EP 3.3-V ABT quadruple bus buffers with 3-state outputs 4 7 — 3.3, 2.7 -32/64 3.9 2.7 to 3.6 — 14TSSOP

SN74LVTH162244-EP 3.3-V ABT, quadruple bus buffer with 3-state outputs — 5 — 3.3, 2.7 -12/12 4 2.7 to 3.6 — 48TSSOP

SN74LVTH16244A-EP 3.3-V ABT, 16-bit buffer/driver with 3-state outputs — 5 — 3.3, 2.7 -24/24 4.4 2.7 to 3.6 —

48SSOP, 48TSSOP, 48TVSOP, 56BGA

MicroStar™ Junior

SN74LVTH244A-EP 3.3-V ABT, octal buffer/driver with 3-state outputs — 14 mA — 3.3, 2.7 -24/32 4.7 2.7 to 3.6 — 20SSOP, 20TSSOP

SN74LVTH32244-EP 3.3-V ABT, 32-bit buffer/driver with 3-state outputs — — — 3.3, 2.7 — — 2.7 to 3.6 — 96LFBGA

TransceiversSN74ABT16245A-EP 16-bit bus transceiver with 3-state outputs — — — — — — — — 48SSOP

SN74ABT245B-EP Octal bus transceivers with 3-state outputs — 30 — 5 -24/32 3.5 4.5 to 5.5 — 20SSOP

SN74AC245-EP Octal bus transceivers with 3-state outputs — 0.004 — 5, 3.3 -24/32 7 2.0 to 6.0 — 20SOIC

SN74ACT16245-EP 16-bit bus transceiver with 3-state outputs — 160 uA — 5 — 9.3 4.5 to 5.5 — 48SSOP

SN74ALVCH16245-EP 16-bit bus transceiver with 3-state outputs — 0.04 — 3.3, 2.7, 2.5, 1.8 -24/24 3 1.65 to 3.6 — 48SSOP

SN74LVC245A-EP Octal bus transceiver with 3-state outputs — 0.001 — 3.3, 2.7, 2.5, 1.8 -24/24 6.1 1.65 to 3.6 — 20TSSOP

SN74LVTH162245-EP 3.3-V ABT, 16-bit bus transceiver with 3-state outputs — 5 — 3.3, 2.7 -32/64 4 2.7 to 3.6 — 48SSOP, 48TSSOP

SN74LVTH16245A-EP 3.3-V ABT, 16-bit bus transceiver with 3-state outputs — 5 — 3.3, 2.7 -24/24 4.5 2.7 to 3.6 —

48SSOP, 48TSSOP, 48TVSOP, 56BGA MicroStar Junior

SN74LVTH16543-EP 3.3-V ABT, 16-bit registered transceiver with3-state outputs — — — 3.3, 2.7 — — — — 56SSOP, 56TSSOP

SN74LVTH16652-EP 3.3 V ABT, 16-bit bus transceiver and register with 3-state outputs — — — 3.3, 2.7 — — 2.7 to 3.6 — 56TSSOP

SN74LVTH245A-EP 3.3-V ABT, octal bus transceiver with 3-state outputs — 5 — 3.3, 2.7 -32/64 3.5 2.7 to 3.6 — 20SSOP, 20TSSOP

SN74LVTH543-EP 3.3-V ABT, octal registered transceiver with3-state outputs — 5 — 3.3, 2.7 -32/64 3.7 2.7 to 3.6 — 24TSSOP

Selection TablesLogic

24 | Enhanced Products Guide 2015 Texas Instruments

Selection TablesLogic

Flip-Flop Latches and Registers

Part Number DescriptionOutput

Drive (mA) th (ns)tpd max

(ns)Vcc Range

(V)Static

Current tsu (ns)Voltage Nodes

(V)Pin/

Package(s)

Flip-flops

CD74HCT574-EP High speed CMOS octal positive-edge-triggered D-type flip-flop with 3-state outputs -6/6 5 41 4.5 to5.5 — 12 — 20SOIC,

20TSSOP

SN74AC74-EP Dual Positive-Edge-Triggered D-Type Flip-Flop -24/24 0.5 10.5 2.0 to6.0 — 0 — 14SOIC

SN74ACT16374-EP 16-bit, D-type edge-triggered flip-flop with 3-state outputs -16/16 1 10.9 4.5 to 5.5 160 uA 6.5 5 48SSOP

SN74ACT74-EP Dual positive-edge-triggered, D-type flip-flop with clear and preset -24/24 1 — CMOS 0.02 4 5 14SOIC

SN74AHC74-EP Dual positive-edge-triggered, D-type flip-flop with clear and preset -8/8 0.5 11 2.0 to 5.5 0.02 5 5, 3.3 14SOIC,

14TSSOP

SN74AHCT74-EP Dual positive-edge-triggered, D-type flip-flop with clear and preset -8/8 0 13 4.5 to 5.5 0.02 5 5 14SOIC,

14TSSOP

SN74HC74-EP Dual positive-edge-triggered, D-type flip-flop with clear and preset — — 345 — — 150 — 14TSSOP

SN74LV374A-EP Octal edge-triggered D-type flip-flop with 3-state outputs -16/16 2 — 2 to 5.5 0.02 3 5, 3.3, 2.5 20TSSOP

SN74LVC1G175-EP Single D-type flip-flop with asynchronous clear — — — 1.65 to. 5.5 10 — — 6SC70

SN74LVC1G79-EP Single positive-edge-triggered D-type tlip-tlop 24 — 3.8 1.65 to. 5.5 10 — — 5SC70

SN74LVC2G74-EP Single positive-edge-triggered D-type flip-flop with clear and preset — — 7.9 1.65 to 5 10 — 3.3 8US8

SN74LVC374A-EP Octal edge-triggered D-type flip-flop with 3-state outputs -24/24 1.5 8.5 2.0 to 3.6 0.01 2 3.3, 2.7 20SOIC,

20TSSOP

SN74LVC574A-EP Octal edge-triggered D-type flip-flop with 3-state outputs -24/24 2 8 2.0 to 3.6 0.01 2 3.3, 2.7 20SOIC,

20TSSOP

SN74LVC74A-EP Dual positive-edge-triggered, D-type flip-flop with clear and preset -24/24 1 5.2 2.0 to 3.6 0.01 3 3.3, 2.7 14SOIC,

14TSSOP

SN74LVTH16374-EP 3.3-V ABT, 16-bit edge-triggered D-type flip-flop with 3-state outputs — — — 2.7 to 3.6 — — 3.3, 2.7 48SSOP,

48TSSOP

SN74LVTH273-EP 3.3-V ABT, octal D-type flip-flops with clear -32/+64 0 4.9 2.7 to 3.6 5 2.3 3.3, 2.7 20SO, 20TSSOP

SN74LVTH32374-EP 3.3-V ABT, 32-bit edge-triggered D-type flip-flop with 3-state outputs — — — 2.7 to 3.6 — — 3.3, 2.7 96LFBGA

SN74LVTH374-EP 3.3-V ABT, octal edge-triggered D-type flip-flop with 3-state outputs -32/+64 0.8 4.5 2.7 to 3.6 5 1.5 3.3, 2.7 20TSSOP

SN74LVTH574-EP 3.3-V ABT, octal edge-triggered D-type flip-flops with 3-state outputs -32/+64 0.3 4.5 2.7 to 3.6 5 2 3.3, 2.7 20TSSOP

Latches

SN74ABT16373A-EP 16-bit, transparent D-type latches with 3-state outputs — 2.2 3.3 4.5 to 5.5 — 2.4 — 48SSOP

SN74AC373-EP Octal D-type transparent latche with 3-state outputs -24/24 1 9.5 2.0 to 6.0 0.04 4 5, 3.3 20SOIC

SN74ACT16373-EP 16-bit, transparent D-type latches with 3-state outputs -16/16 5 10.8 4.5 to 5.5 160 uA 1 5 48SSOP

SN74ACT373-EP Octal D-type transparent latche with 3-state outputs -24/24 1 12.5 4.5 to 5.5 0.04 8.5 5 20SOIC

SN74LVC16373A-EP D-type latch with 3-state outputs — 1.6 4.2 1.65 to 3.6 — 1.7 — 48SSOP

SN74LVC373A-EP D-type latch with 3-state outputs -24/24 2 7.5 2.0 to 3.6 0.01 2 3.3, 2.7 20SSOP, 20TSSOP

SN74LVTH162373-EP 3.3-V ABT, 16-bit transparent D-type latche with 3-state outputs — — — — — — — 48SSOP

SN74LVTH16373-EP 3.3-V ABT, 16-bit transparent D-type latche with 3-state outputs — — — 2.7 to 3.6 — — 3.3, 2.7

48SSOP, 48TSSOP, 56BGA

Microstar™ Junior

SN74LVTH32373-EP 3.3-V ABT, 32-bit transparent D-type latche with 3-state outputs — — — 2.7 to .6 — — 3.3, 2.7 96LFBGA

SN74LVTH373-EP 3.3-V ABT, octal transparent D-type latche with 3-state outputs -32/+64 1.4 3.9 2.7 to 3.6 5 1.1 3.3, 2.7 20TSSOP

SN74LVTH573-EP 3.3-V ABT, octal transparent D-type latche with 3-state outputs -32/+64 1.5 3.9 2.7 to 3.6 5 0.7 3.3, 2.7 20TSSOP

Texas Instruments Enhanced Products Guide 2015 | 25

Selection TablesLogic

Flip-Flop Latches and Registers (cont.)

Part Number DescriptionOutput

Drive (mA) th (ns)tpd max

(ns)Vcc Range

(V)Static

Current tsu (ns)Voltage Nodes

(V)Pin/

Package(s)

RegistersSN74HC165-EP 8-bit parallel-load shift registers -4/4 5 30 2.0 to 6.0 0.008 30 6, 5, 2 16TSSOP

SN74LV165A-EP 8-bit parallel-load shift registers 0.02 0.5 12.5 2 to 5.5 — 5 5, 3.3, 2.5 16TSSOP

SN74HC166A-EP 8-bit parallel-load shift registers +/-4 5 — 2 to 6 0.008 29 2, 4.5, 6 16SOIC

SN74HC595-EP 8-bit shift registers with 3-state output registers -7.8/7.8 0 34 2 to 6 — 10 2, 4.5, 6 16TSSOP

SN74LV595A-EP 8-bit shift registers with 3-state output registers -16/16 1.5 11.9 2 to 5.5 0.02 8 5, 3.3, 2.5 16TSSOP

SN74LV74A-EP 8-bit shift registers with 3-state output registers -16/16 1.5 11.9 2 to 5.5 0.02 8 5, 3.3, 2.5 16TSSOP

Dual-Supply Translators and Trancievers

Part Number DescriptionNo. of

Outputs tpd max (ns)Vcc Range

(V)Pin/

Package(s)

CD4504B-EP CMOS hex voltage-level shifter for TTL-to-CMOS or CMOS-to-CMOS operation 6 — 5.0 to 20 16TSSOP

SN74ALVC164245-EP 16-bit 2.5-V to 3.3-V/3.3-V to 5-V level-shifting transceiver, 3-state output 16 5.8 SplitRail 48SSOP, 48TSSOP

SN74AVCH4T245-EP 4-bit dual-supply bus transceiver with configurable voltage translation and 3-state outputs — — 1.2 to 3.6 16QFN

SN74LVC1T45-EP Single-bit dual-supply bus transceiver, configurable voltage translation and 3-state outputs 1 — 1.65 to 5.5 6SC70

SN74LVC16T245-EP 16-bit dual-supply bus transceiver 3 8.2 1.65 to 5.5 48TSSOP

SN74LVC2T45-EP Dual-bit dual supply transceiver with configurable voltage translation and 3-state outputs — — 1.65 to 5.5 8SM8

SN74LVC4245A-EP Octal bus transceiver and 3.3-V to 5-V shifter with 3-state outputs 8 6.7 SplitRail 24TSSOP

SN74LVC8T245-EP 8-bit dual-supply bus transceiver with configurable voltage translation and 3-state outputs 8 — 1.65 to 5.5 24TSSOP

SN74LVCC3245A-EP Octal bus transceiver with adjustable output voltage and 3-state outputs — 7.6 SplitRail 24SOIC, 24SSOP, 24TSSOP

SN74LVCC4245A-EP Octal dual-supply bus transceiver with configurable output voltage and 3-state outputs — — SplitRail 24TSSOP

SN74LVCH16T245-EP 16-bit dual-supply bus transceiver, configurable voltage translation, 3-state outputs 16 — 1.65 to 5.5 48TSSOP, 48TVSOP

SN74AVCB164245-EP 16-Bit Dual-Supply Bus Transceiver w/ configurable translation and 3-state outputs 3 13.6 1.4 to3.6 48TSSOP

Line Drivers, Receivers and Transceivers

Part Number DescriptionSignaling Rate

(Mbps)Supply

Voltage(s) (V) No. of TX/RX ICC (max) (mA)Pin/

Package(s)

AM26C31-EP Quadruple differential line driver — 5 4 TX 3.2 16SOIC

AM26C32-EP Quadruple differential line receiver — 5 4 RX 15 16SOIC

AM26LS32AM-EP Quadruple differential line receiver — 5 4 RX 70 16SOIC

AM26LV31E-EP Low-voltage high-speed quad differential line driver, +/-15-kV IEC ESD protection 32 3.3 4 TX 0.1 16SOIC

AM26LV32E-EP Low-voltage high-speed quad differential line receiver, +/-15-kV IEC ESD 32 3.3 4 RX — 16SOIC

MAX3221-EP 3-V to 5.5-V single-channel RS-232 line driver/receiver with +/-15-Kv ESD — 3.3 or 5.0 1 TX/1 RX 1 16SSOP

MAX3223-EP 3-V to 5.5-V multichannel RS-232 line driver/receiver with +/-15-Kv ESD — 3.3 or 5.0 2 TX/2RX 1 20SSOP

MAX3232-EP 3-V to 5.5-V multichannel RS-232 line driver/receiver with +/-15-Kv ESD — 3.3 or 5.0 2 TX/2RX 1 16SSOP, 16TSSOP

MAX3243-EP 3-V to 5.5-V multichannel RS-232 line driver/receiver with +/-15-Kv ESD — 3.3 or 5.0 3 TX/5 RX 1 28SSOP, 28TSSOP

PCI1520-EP PC card controllers data manual N/A 3.3 — n/a 208LQFP, 209BGA MicroStar™

SN65HVD1050-EP EMC-optimized CAN transceiver 1 5 1 TX / 1 RX 10, 70 8SOIC

SN65HVD09-EP 9-CHANNEL RS-485/422 TRANSCEIVER — 5 9 TX/9 RX 10, 60 56TSSOP

SN65HVD10-EP 3.3-V RS-485 transceiver 25 3.3 1 TX/1 RX 15.5 8SOIC

SN65HVD12-EP 3.3-V RS-485 transceiver 1 3.3 1 TX/1 RX 15.5 8SOIC

SN65HVD21M-EP Extended common-mode RS-485 transceiver 5 5 1 TX/1 RX 15 8SOIC

SN65HVD230M-EP 3.3-V CAN transceiver with standby mode 1 3.3 1 TX / 1 RX 17 8SOIC

26 | Enhanced Products Guide 2015 Texas Instruments

Selection TablesLogic

Gates

Part Number DescriptionVcc Range

(V)Voltage

Nodes (V) IOL (mA)tpd max

(ns)No. of Gates

IOH (mA)

ICC (uA)

Output Drive (mA)

Pin/ Package(s)

Single Input GatesSN74AHC1G02-EP Single 2-input positive-NOR gate 2 to 5.5 — 8 — — -8 10 — 5SC70

SN74AHC1G86-EP Single 2-input exclusive-OR gate 2 to 5.5 — 8 — 1 -8 10 — 5SC70

SN74LVC1G00-EP Single 2-input positive-NAND gate 1.65 to 5.5 1.8, 2.5, 3.3, 5 32 4 — -32 10 — 5SC70, 5SOT-23

SN74LVC1G02-EP Single 2-input positive-Nor gate 1.65 to 5.5 — — — 1 — 10 — 5SC70

SN74LVC1G08-EP Single 2-input positive-AND gate 1.65 to 5.5 1.8, 2.5, 3.3, 5 32 4 — -32 10 — 5SC70, 5SOT-23

SN74LVC1G11-EP Single 3-input positive-AND gate 1.65 to 5.5 — 32 5.9 1 -32 10 24 6SC70

SN74LVC1G32-EP Single 2-input positive-OR gate 1.65 to 5.5 1.8, 2.5, 3.3, 5 32 4 — -32 10 — 5SC70, 5SOT-23

SN74LVC1G3208-EP Single 3-input positive OR-AND gate 1.65 to 5.5 — 24 3.4 2 -24 10 24 6SOT-23

SN74LVC1G86-EP Single 2-input exclusive-OR gate 1.65 to 5.5 — 32 — 1 -32 10 — 5SC70

Dual Input GatesSN74LVC2G00W-EP Dual 2-input positive-NAND gate 1.65 to 5.5 — 32 3.3 2 -32 10 — 8SM*

SN74LVC2G02-EP Dual 2-input positive-NOR gate 1.65 to 5.5 — 24 5.4 — -24 10 — 8US8

SN74LVC2G08-EP Dual 2-input positive-AND gate 1.65 to 5.5 — 24 4.8 2 -24 10 — 8US8

SN74LVC2G32-EP Dual 2-input positive-OR gate — — — — 2 — — 10 8US8

Triple Input GatesSN74AC11-EP Triple 3-input positive-AND gate 2.0 to 6.0 5, 3.3 — 8 3 — — -24/24 14TSSOP

SN74HC10-EP Triple 3-input positive-NAND gate 2.0 to 6.0 6, 5, 2 — 19 3 — — -4/4 14SOIC, 14TSSOP

Line Drivers, Receivers and Transceivers (cont.)

Part Number DescriptionSignaling Rate

(Mbps)Supply

Voltage(s) (V) No. of TX/RX ICC (max) (mA)Pin/

Package(s)

SN65HVD233-EP 3.3-V CAN tranceiver 1 3.3 1 TX / 1 RX 6 8SOIC

SN65HVD30-EP 3.3-V full-duplex RS-485 driver and receiver 25 3.3 1 TX/1 RX 2.1 8SOIC

SN65HVD33-EP 3.3-V full-duplex RS-485 drivers and receiver 25 3.3 1 TX/1 RX 2 14SOIC

SN65LBC174A-EP Quadruple RS-485 differential line driver 30 5 4 TX/0 RX 23 20SOIC

SN65LBC176A-EP Differential bus transceivers 30 5 1 TX/1 RX 15 8SOIC

SN65LV1023A-EP 10:1 LVDS SERDES transmitter 100-660 Mbps 660 3.3 1 TX 25 28SSOP

SN65LV1224B-EP 1:10 LVDS SERDES receiver 100-660 Mbps 660 3.3 1 RX 35 28SSOP

UA9638C-EP Dual High-Speed Differential Line Driver 15 5 2 TX/0 RX 65 8SOIC

SN65LVDS179-EP High-speed differential line drivers and receivers 400 3.3 — 12 8MSOP

SN65LVDS31-EP Quad LVDS Transmitter 400 3.3 4 TX 35 16SOIC

SN65LVDS33-EP High-speed differential receivers 400 3.3 — 25 16SOIC

SN65LVDS95-EP 23:1 LVDS SERDES transmitter 1360 3.3 1 TX 110 48TSSOP

SN65LVDT14-EP Memorystick interconnect extender chipset 125 3.3 1 TX/4 RX 25 20TSSOP

SN65LVDT41-EP Memorystick interconnect extender chipset 125 3.3 4 TX/1 RX 25 20TSSOP

SN75976A-EP 9-channel differential transceiver 20 5 9 TX/9 RX 10, 45, 60 56TSSOP

TFP401A-EP PanelBus DVI receiver 165 MHz, HSYNC fix 495 3.3 3 RX 400 100HTQFP

TFP410-EP PanelBus digital transmitter 495 3.3 3 TX 250 64HTQFP

TL16C752B-EP 3.3-V dual UART with 64-byte FIFO 3 3.3 2 TX/2 RX 20 48LQFP

Texas Instruments Enhanced Products Guide 2015 | 27

Selection TablesLogic

Gates (cont.)

Part Number DescriptionVcc Range

(V)Voltage

Nodes (V) IOL (mA)tpd max

(ns)No. of Gates

IOH (mA)

ICC (uA)

Output Drive (mA)

Pin/ Package(s)

CD74ACT86-EP Quadruple 2-input exclusive-OR gate -0.5 to 6 — — — — — — 0.08 14SOIC

SN74HC02-EP Quadruple 2-input positive-NOR gate 2 to 6 2, 4.5, 6 — 18 4 — 40 — 14TSSOP

CD74HC08-EP Quadruple 2-input positive-AND gate 2 to 6 2, 4.5, 6 — 18 4 — — — 14SOIC

SN74AC08-EP Quadruple 2-input positive-AND gate 2.0 to 6.0 5, 3.3 — 7.5 4 — — -24/24 14SOIC

SN74AC32-EP Quadruple 2-input positive-OR gate 2 to 6 5, 3.3 — 7.5 4 — — -24/24 14SOIC

SN74ACT08-EP Quadruple 2-input positive-AND gate 4.5 to 5.5 5 — 10 4 — — -24/24 14SOIC

SN74AHC00-EP Quadruple 2-input positive-NAND gate 2.0 to 5.5 5, 3.3 — 9.5 4 — — -8/8 14SOIC, 14TSSOP

SN74AHC02-EP Quadruple 2-input positive-NOR gate 2.0 to 5.5 5, 3.3 — 8.5 4 — — -8/8 14TSSOP

SN74AHC08-EP Quadruple 2-input positive-AND gate 2.0 to 5.5 5, 3.3 — 9 4 — — -8/8 14SOIC, 14TSSOP

SN74AHC32-EP Quadruple 2-input positive-OR gate 2.0 to 5.5 5, 3.3 — 8.5 4 — — -8/8 14SOIC, 14TSSOP

SN74AHCT00-EP Quadruple 2-input positive-NAND gate 4.5 to 5.5 5 — 9 4 — — -8/8 14SOIC, 14TSSOP

SN74AHCT08-EP Quadruple 2-input positive-AND gate 4.5 to 5.5 5 — 9 4 — — -8/8 14SOIC, 14TSSOP

SN74AHCT32-EP Quadruple 2-input positive-OR gate 4.5 to 5.5 5 — 9 4 — — -8/8 14SOIC, 14TSSOP

SN74LV08A-EP Quadruple 2-input positive-AND gate 2.0 to 5.5 5, 3.3, 2.5 — 12 4 — — -12/12 14TSSOP

SN74LV32A-EP Quadruple 2-input positive-OR gate 2.0 to 5.5 5, 3.3, 2.5 — 12 4 — — 7.5 14TSSOP

SN74LV86A-EP Quadruple 2-input exclusive-OR gate 2 to 5.5 3.3, 2.5, 5 — 8.8 4 — — -12/12 14TSSOP

SN74ALVC00-EP Quadruple 2-input positive-NAND gate 1.65 to 3.6 3.3, 2.7,

2.5, 1.8 — 3 4 — — -24/24 14SOIC

SN74ALVC08-EP Quadruple 2-input positive-AND gate 1.65 to 3.6 3.3, 2.7, 2.5, 1.8 — 2.9 4 — — -24/24 14SOIC

SN74LVC08A-EP Quadruple 2-input positive-AND gate 2.0 to 3.6 3.3, 2.7 — 4.1 4 — — -24/24 14SOIC, 14TSSOP

SN74LVC86A-EP Quadruple 2-input exclusive-OR gate 2.0 to 3.6 3.3, 2.7 — 4.6 4 — — -24/24 14SOIC, 14TSSOP

SN74LVC00A-EP Quadruple 2-input positive-NAND gate 2.0 to 3.6 3.3, 2.7 — 4.3 4 — — -24/24 14SOIC, 14TSSOP

SN74LVC02A-EP Quadruple 2-input positive-NOR gate 2.0 to 3.6 3.3, 2.7 — 5.5 4 — — -24/24 14TSSOP

SN74LVC32A-EP Quadruple 2-input positive-OR gate 2 to 3.6 3.3, 2.7 — 3.8 4 — — -24/24 14SOIC, 14TSSOP

Signal Switches

CD74HC4051-EP High-speed CMOS logic analog multiplexer/demultiplexer

Analog Switches and Multiplexers (less than or equal to 5V)

60 1 X 1:8 MUX 8 180 — — 2, 4.5, 6 16SOIC

SN74CBTLV3257-EP Low-voltage, 4-bit, 1-Of-2 FET multiplexer/demultiplexer

Digital Bus Exchange/

Multiplexing Switches

— — — 7 2.3 to 3.6 10 3.3, 2.5 16TSSOP

SN74LV4051A-EP 8-channel analog multiplexer/ demultiplexer

Analog Switches and Multiplexers (less than or equal to 5V)

7 1 X 1:8 MUX 8 190 2.0 to

5.5 20 5, 3.3, 2.5 16SOIC, 16TSSOP

SN74LV4052A-EP Dual 4-channel analog multiplexer/ demultiplexer

Analog Switches and Multiplexers (less than or equal to 5V)

8 2 X 1:4 MUX 4 190 2.0 to

5.5 20 5, 3.3, 2.5 16TSSOP

SN74LV4053A-EP Triple 2-channel analog multiplexer/demultiplexer

Analog Switches and Multiplexers (less than or equal to 5V)

16 3 X SPDT 2 190 2.0 to 5.5 20 5, 3.3, 2.5 16TSSOP

TS5A3159-EP 1-Ohm Spdt analog switch

Analog Switches and Multiplexers (less than or equal to 5V)

— 1 X SPDT 1 1.3 1.65 to 5.5 0.01

1.8, 2.5, 3.0, 3.3,

5.06SOT-23

Quadruple Input Gates

28 | Enhanced Products Guide 2015 Texas Instruments

Selection TablesLogic

Specialty Logic

Part Number Description Sub FamilyOutput Drive

(mA)Vcc Range

(V)Static

CurrentVoltage

Nodes (V)tpd max

(ns)Pin/

Package(s)

SN74LVT8980A-EP Test-bus controller IEEE Std 1149.1 (Jtag) tap master

Boundary Scan (JTAG) Support Devices — 2.7 to 3.6 — 3.3, 2.7 — 24SOIC

SN74LVT8996-EP 3.3-V ABT, 10-bit multidrop-addressable IEEE Std 1149.1 tap transceiver

Boundary Scan (JTAG) Support Devices — 2.7 to 3.6 — 3.3, 2.7 — 24TSSOP

SN74SSTV32852-EP 24- to 48-bit registered buffer with Sstl_2-inputs and outputs

DIMM Memory Drivers and Transceivers — — — 2.5 3.1 114BGA

MICROSTAR

SN74SSTV32867-EP 26-bit registered buffer with Sstl_2-inputs and LvCMOS outputs

DIMM Memory Drivers and Transceivers — — — — — 96LFBGA

SN74AHC123A-EP Dual retriggerable monostable multivibrator Monostable Multivibrators — 2 tp 5.5 — 5, 3.3 — 16SOIC

SN74LV123A-EP Dual retriggerable monostable multivibrator Monostable Multivibrators — 2 to 5.5 — 5, 3.3, 2.5 — 16TSSOP

SN74V245-EP 4096 x 18 synchronous FIFO memory Synchronous FIFOs 3-3.6 — 3.3 — 64TQFP

SN74V263-EP 8192 X 18 synchronous FIFO memory Synchronous FIFOs -2/8 3.15 to 3.45 — 3.3 — 80LQFP

SN74V273-EP 16384 X 18 synchronous FIFO memory Synchronous FIFOs -2/8 3.15 to 3.45 — 3.3 — 80LQFP

SN74V283-EP 32768 X 18 synchronous FIFO memory Synchronous FIFOs -2/8 3.15 to 3.45 — 3.3 — 80LQFP

SN74V293-EP 65536 X 18 synchronous FIFO memory Synchronous FIFOs -2/8 3.15 to 3.45 — 3.3 — 80LQFP

MSI Functions

Part Number Description Sub Family Input LevelVcc Range

(V)Output Level

Voltage Nodes (V)

Output Drive (mA) Output

Pin/ Package(s)

CD74HC40103-EP High-speed CMOS logic 8-stage synchronous down counter Binary Counters CMOS 2.0 to 6.0 CMOS 6, 5, 2 — — 16SOIC

CD74HC4017-EP Decade counter/driver with 10 decoded outputs Decade Counter CMOS 2.0 to 6.0 CMOS 6, 5, 2 — 16SOIC

SN74AHCT138-EP 3- to 8-line decoder/demultiplexer Decoders/ Demultiplexers TTL/COMS 4.5 to 5.5 CMOS 5 -1 2S 16SOIC, 16TSSOP

SN74HC253-EP Dual 4- to 1-line data selector/multiplexer with 3-state output Data Selectors/ Multiplexers CMOS 2.0 to 6.0 CMOS 6, 5, 2 -1 3S 16SOIC

SN74LV393A-EP Dual 4-bit binary counter Binary Counters — 2.0 to 5.5 — 5, 3.3, 2.5 -1 — 14 TSSOP

SN74LV4040A-EP 12-bit asynchronous binary counter Binary Counters — 2.0 to 5.5 — 5, 3.3, 2.5 — — 16TSSOP

SN74LV8154-EP Dual 16-bit binary counter with 3-state output register Binary Counters — 2.0 to 5.5 — 5, 3.3, 2.5 -1 — 20TSSOP

SN74LVC138A-EP 3- to 8-line decoder/demultiplexer Decoders/ Demultiplexers TTL/COMS 2.0 to 3.6 LVTTL 3.3, 2.7 -1 2S 16SOIC, 16TSSOP

SN74LVC157A-EP Quadruple 2- to 1-line data selector/Mmultiplexer Data Selectors/ Multiplexers TTL/COMS 2.0 to 3.6 LVTTL 2.7, 3.3 -1 2S 16SOIC,

16TSSOP

SN74LVC257A-EPQuadruple 4- to 1-line data selector/multiplexer with 3-state output

Data Selectors/ Multiplexers TTL/COMS 2.0 to 3.6 LVTTL 2.7, 3.3 -1 3S 16TSSOP

Universal Bus Functions

Part Number Description Sub FamilyVoltage

Nodes (V)Technology

FamilyNo. of Bits

Vcc range (V)

Pin/ Package(s)

SN74LVTH182512-EP 3.3-V ABT, scan test device with 18-bit universal bus transceiver Boundary Scan (JTAG) Bus Devices 3.3, 2.7 LVT 18 2.7 to3.6 64TSSOP

SN74VMEH22501A-EP 8-bit universal bus transceiver and a 1-bit bus transceiver Universal Bus Transceivers (UBTs) 3.3 VME 8 3.15 to 3.45

48TSSOP, 48TVSOP

SN74CB3Q3306A-EP DUAL FET BUS SWITCH 2.5-V/3.3-V LOW-VOLTAGE HIGH-BANDWIDTH BUS SWITCH Digital Switch/MUX/DEMUX 3.3, 2.5 CB3Q 2 2.3 to 3.6 8TSSOP

Texas Instruments Enhanced Products Guide 2015 | 29

Selection TablesLogic

Temperature Sensors

Part Number Description

Supply Voltage

(min) (V)

Supply Voltage

(max) (V)

Temp Resolution (max) (bits)

Iq (typ) (uA) Interface

Temp Resolution (min) (bits)

Accuracy Over Temp Range

(max) (C)Pin/

Package(s)

TMP100-EP Digital temperature sensor with I2C serial interface 2.7 5.5 12 45 I2C , SMBus 9 3 6SOT-23

TMP121-EP 1.5°C accurate digital temperature sensor with SPI interface 2.7 5.5 12 35 SPI 12 12 6SOT-23

TMP122-EP 1.5°C accurate programmable remperature sensor with SPI interface 2.7 5.5 12 50 SPI 9 12 6SOT-23

TMP422-EP ±1°C Remote and Local Temperature Sensor 2.7 5.5 12 32 I2C , SMBus 12 — 8SOT-23

30 | Enhanced Products Guide 2015 Texas Instruments

Selection TablesHIREL

Digital Signal Processors

Part Number Description CPUFrequency

(MHz) PWM EMIF DMA

Core Supply (Volts) McBSP I2C SPI CAN

IO Supply (Volts)

Pin/ Package(s)

SM320DM6446-HIRELDaVinci Digital Media System-on-Chip

1 ARM9, 1 C64x+; DaVinci

Video297, 594 3 8/16-Bit 64-Ch EDMA 1.2 1 1 1.8, 3.3 361NFBGA

Fixed-Point Digital Signal Processors

SM320C6472-HIREL Fixed-Point Digital Signal Processor 1 C647x 700 — 1 32-Bit

DDR2 64-Ch EDMA 1.0, 1.1, 1.2 — 1 — — 1.2, 1.8,

3.3 737BGA

SM320DM642-HIRELVideo/Imaging Fixed-Point Digital Signal Processor

1C64x 500, 600, 720 — 1 64-Bit

EMIFA 64-Ch EDMA 1.2, 1.4 2 1 — — 3.3 548BGA

SM320VC5510A-HIREL Fixed-Point Digital Signal Processor 1 C55x 200 — 32-Bit

external6-Ch DMA controller 1.6 3 — 1 — 2.7 to 3.6 205BGA

MICROSTAR

OMAP™ Processors

OMAP3503-HIREL

High-performance, applications processor

1 ARM Cortex-A8 720 — — 32-Bit Ch SDMA, 64Ch EDMA

0.985 to 1.35 5 3 4 — 1.8 to3.0 515POP-

FCBGA

OMAP3530-HIREL Applications processor

1 64x+; 1 ARM Cortex-A8 — —

1 16-Bit GPMC,

1 32-Bit SDRC

32-Bit Ch SDMA, 64Ch EDMA

0.8 to 1.35 5 3 — — 1.8 to 3.0 515 POP-

FCBGA

OMAP3525-HIREL Applications processor

1 64x+; 1 ARM Cortex-A8 — —

1 16-Bit GPMC,

1 32-Bit SDRC

32-Bit Ch SDMA, 64Ch EDMA

0.8 to 1.35 5 3 — — 1.8 to3.0 515 POP-

FCBGA

SMOMAPL138B-HIRELLow-Power Applications Processor

1 C674x; 1 ARM9 456 2

1 8/16-Bit EMIFA,

1 16-Bit DDR2

2 32-Bit Ch EDMA 1.2, 1.3 2 2 2 — 1.8, 3.3 361NFBGA

Interface: RS-485Part Number Description No. of Rx/TX Pin/ Package

SN55LBC173-HIREL Quadruple Low-Power Differential Line Receiver 4/0 0XCEPT (KGD)

Operational Amplifier

Part Number DescriptionIq per Channel

(max) (mA)Number of Channels

VIO (25°C) (max) (mV)

Slew Rate (typ) (V/us)

Total Supply Voltage (V) (max) (+5 V = 5, +/-5 V

= 10)Pin/

Package(s)

OPA549-HIREL High-Voltage, High-Current Operational Amplifier 35 1 1 9 60 11Power Package

OPA2348-HIREL 1MHz, 45uA, RRIO, Dual Op Amp 0.065 2 5 0.5 5.5 0XCEPT (KGD)

PWM Power Supply Controllers

Part Number Description TopologyPWM

Outputs (#)

UVLO Thresholds On/Off (V) Control Method

Frequency (max) (kHz)

Duty Cycle (max) (%)

Pin/ Package

UC1843-HIREL Current-mode PWM controller Boost, Flyback, Forward 1 8.4/7.6 Current mode 450 100 0XCEPT

• Fabrication and assembly controlled baseline• Extended product change notification (PCN)• Extended temperature performance (typically -55°C to +125°C or

customer specified)• Standalone data sheet• Product traceability• Long product life cycles

• Different choice of packages from our TI standard catalog offering.• Enhanced testing coverage for devices.

Not all products can meet the rigorous EP standards but many Avionics, Defense, Industrial and harsh environment applications can benefit from the features above. The “-HIREL” products are released to specific customer requirements and the quality baseline can be tailored to the application.

Our “-HIREL” products offer many of the same benefits as EP, such as:

Texas Instruments Enhanced Products Guide 2015 | 31

Selection TablesClass N

Class NPart Number Description Orderable Material

SMQ320C32 Digital Signal Processor 5962-9679001NXB; 5962-9679002NXB

SMQ320C50 Digital Signal Processor 5962-9455804NZB

SMQ320LC31 MILITARY DIGITAL SIGNAL PROCESSORS 5962-9760601NXB

SN54ABTH32245 36-Bit Bus Transceivers With 3-State Outputs 5962-9557701NXD

SN54ABTH32543 36-Bit Registered Bus Transceivers With 3-State Outputs 5962-9557801NXD

THS1206M 12-Bit, 6 MSPS ADC Quad Ch. (Config.), DSP/uP IF, Integ. 16x FIFO, Channel AutoScan, Low Power 5962-9957701NXD

THS1408M 14-Bit, 8 MSPS ADC Single Ch., Diff. Input, DSP/uP IF, Pgmable Gain Amp, Internal S&H 5962-0051101NXD

TLC139 Quad, Micropower, LinCMOS(TM) Comparator 5962-9555001NXD; 5962-87659022A; 5962-8765902CA

TLC193 Dual Micropower LinCMOS(TM) Comparator 5962-9555101NXD; 5962-9555101QPA

TLC2252AM Rail-To-Rail uPower Precision Advanced LinCMOS(TM) Dual Operational Amplifier 5962-9564003NXD; 5962-9564003Q2A; 5962-9564003QPA; 5962-9564003QHA

TLC2252M Rail-To-Rail uPower Advanced LinCMOS(TM) Dual Operational Amplifier 5962-9564001NXD; 5962-9564001Q2A; 5962-9564001QPA; 5962-9564001QHA

TLC2254AM Rail-To-Rail uPower Precision Advanced LinCMOS(TM) Quad Operational Amplifier 5962-9564004Q2A; 5962-9564004QCA; 5962-9564004QDA

TLC2254M Rail-To-Rail uPower Advanced LinCMOS(TM) Quad Operational Amplifier 5962-9564002Q2A; 5962-9564002QCA; 5962-9564002QDA

TLC2272M Rail-To-Rail Low Noise Advanced LinCMOS(TM) Dual Operational Amplifier 5962-9555201NXD; 5962-9555201Q2A; 5962-9555201QPA; 5962-9555201QHA

TLC372M Low-Power LinCMOS(TM) Dual Comparator 5962-9554901NXD; 5962-87658012A; 5962-8765801PA;

TI also offers a line QML class N products qualified to MIL-PRF-38535. Our list of Class N parts are below.

TI Worldwide Technical SupportInternetTI Semiconductor Product Information Center Home Pagesupport.ti.comTI E2E™ Community Home Pagee2e.ti.com

Product Information CentersAmericas Phone +1(512) 434-1560

Brazil Phone 0800-891-2616

Mexico Phone 0800-670-7544

Fax +1(972) 927-6377 Internet/Email support.ti.com/sc/pic/americas.htm

Europe, Middle East, and AfricaPhone

European Free Call 00800-ASK-TEXAS (00800 275 83927)

International +49 (0) 8161 80 2121

Russian Support +7 (4) 95 98 10 701

Note: The European Free Call (Toll Free) number is not active in all countries. If you have technical difficulty calling the free call number, please use the international number above.

Fax +(49) (0) 8161 80 2045Internet www.ti.com/asktexasDirect Email asktexas@ti.com

JapanPhone Domestic (toll-free number) 0120-92-3326Fax International +81-3-3344-5317 Domestic 0120-81-0036Internet/Email International support.ti.com/sc/pic/japan.htm Domestic www.tij.co.jp/pic

AsiaPhone Toll-Free Number Note: Toll-free numbers may not support

mobile and IP phones. Australia 1-800-999-084 China 800-820-8682 Hong Kong 800-96-5941 India 000-800-100-8888 Indonesia 001-803-8861-1006 Korea 080-551-2804 Malaysia 1-800-80-3973 New Zealand 0800-446-934 Philippines 1-800-765-7404 Singapore 800-886-1028 Taiwan 0800-006800 Thailand 001-800-886-0010International +86-21-23073444Fax +86-21-23073686Email tiasia@ti.com or ti-china@ti.comInternet support.ti.com/sc/pic/asia.htm

B012014

Important Notice: The products and services of Texas Instruments Incorporated and its subsidiaries described herein are sold subject to TI’s standard terms and conditions of sale. Customers are advised to obtain the most current and complete information about TI products and services before placing orders. TI assumes no liability for applications assistance, customer’s applications or product designs, software performance, or infringement of patents. The publication of information regarding any other company’s products or services does not constitute TI’s approval, warranty or endorsement thereof.

© 2015 Texas Instruments IncorporatedPrinted in U.S.A. by (Printer, City, State)

The platform bar and E2E are trademarks of Texas Instruments.All other trademarks are the property of their respective owners.

SGZT005A

IMPORTANT NOTICE

Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and otherchanges to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latestissue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current andcomplete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of salesupplied at the time of order acknowledgment.TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s termsand conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessaryto support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarilyperformed.TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products andapplications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provideadequate design and operating safeguards.TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, orother intellectual property right relating to any combination, machine, or process in which TI components or services are used. Informationpublished by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty orendorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of thethird party, or a license from TI under the patents or other intellectual property of TI.Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alterationand is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altereddocumentation. Information of third parties may be subject to additional restrictions.Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or servicevoids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.TI is not responsible or liable for any such statements.Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirementsconcerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or supportthat may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards whichanticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might causeharm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the useof any TI components in safety-critical applications.In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is tohelp enable customers to design and create their own end-product solutions that meet applicable functional safety standards andrequirements. Nonetheless, such components are subject to these terms.No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the partieshave executed a special agreement specifically governing such use.Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use inmilitary/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI componentswhich have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal andregulatory requirements in connection with such use.TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use ofnon-designated products, TI will not be responsible for any failure to meet ISO/TS16949.

Products ApplicationsAudio www.ti.com/audio Automotive and Transportation www.ti.com/automotiveAmplifiers amplifier.ti.com Communications and Telecom www.ti.com/communicationsData Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computersDLP® Products www.dlp.com Consumer Electronics www.ti.com/consumer-appsDSP dsp.ti.com Energy and Lighting www.ti.com/energyClocks and Timers www.ti.com/clocks Industrial www.ti.com/industrialInterface interface.ti.com Medical www.ti.com/medicalLogic logic.ti.com Security www.ti.com/securityPower Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defenseMicrocontrollers microcontroller.ti.com Video and Imaging www.ti.com/videoRFID www.ti-rfid.comOMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.comWireless Connectivity www.ti.com/wirelessconnectivity

Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265Copyright © 2015, Texas Instruments Incorporated