Upload
others
View
4
Download
0
Embed Size (px)
Citation preview
Wiring Instruction For:
E-RKS REMOTE STATION KEYPAD E-ACK SERIES DIGITAL KEYPAD E-EDR-SF FAIL SAFE STRIKE E-EDR-SCR FAIL SECURE STRIKE
The ENVIROMUX devices listed above are intended for connection to an NTI E-16D/5D/2D or an E-MINI-LXO (SYSTEM). For additional instruction on their proper use and operation, see any manuals that came with them and the manual provided with your SYSTEM. Wiring instruction for connection to these SYSTEMs can be found below and on the pages that follow. For the purposes of these illustrations, the “Keypad” can be either the E-RKS or E-ACK.
Wiring Connections for E-16D
ENVIROMUX® Series
Photo Gallery of an Installation
CAT5 cable- plugged into sensor port on one end, connected to Keypad at the other end.
Two-wire cable to power electric strike
Jumper wire to provide power for electric strike.
When output relay 1 closes, 12VDC powers the electric strike. The black wire of the two-wire cable connects to ground.
The black wire of the two-wire cable connects to ground.
E-RKS wired to CAT5 patch cable. Brown and white brown are optional. Green and white green are not used.
Optional: Apply brown to 7, and white brown to 4 if you want to power the LEDs
E-ACK wired to CAT5 patch cable. Green and white green are not used.
The two-wire cable connects to the E-EDR-SCR
Wiring Connections for E-LXO/ E-2D / E-5D The E-MINI-LXO, E-2D and E-5D will also provide sensing and switching functions for the E-RKS,E-ACK, E-EDR-SF, or E-EDR-SCR. An example of how these components can be connected can be seen below. When sold for use with the E-MINI-LXO, E-2D or E-5D, the model numbers include a “-P” and are shipped with a 12V power supply.
Warranty Information The warranty period on this product (parts and labor) is two (2) years from the date of purchase. Please contact Network Technologies Inc at (800) 742-8324 (800-RGB-TECH) or (330) 562-7070 or visit our website at http://www.networktechinc.com for information regarding repairs and/or returns. A return authorization number is required for all repairs/returns.
COPYRIGHT Copyright © 2011,2018 by Network Technologies Inc. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written consent of Network Technologies Inc, 1275 Danner Drive, Aurora, Ohio 44202.
CHANGES The material in this guide is for information only and is subject to change without notice. Network Technologies Inc reserves the right to make changes in the product design without reservation and without notification to its users.
Man133 Rev 4/27/18