Kirintec10 Old Gloucester RoadRoss on Wye HR9 5PBUnited Kingdom

T: +44 (0) 1989 568 350F: +44 (0) 1989 568 351info@kirintec.comwww.kirintec.com

EOD Tools

Ceramic Knives and ToolsA selection of tools for use worldwide

Ceramic Knives and Tools

US Office6832 Old Dominion DriveSuite 206 McLean VA22101Tel: 703.448.0440

EOD KnifeMilitary and Police Units worldwide employ this tool. Completely non-magnetic and non conductive razor sharp black ceramic knife blade with a stiletto point and anti-slip handle.

Blade length is 3"or 75mm and weight with blade protector 1.3oz or 36gms.

Carbon Fiber Ceramic KnifeIt’s light and easy to carry, makes it popular with a number of elite police units.This knife is not completely anti-magnetic or non-conductive due to the presence of a stainless steel liner under one of the solid carbon fiber handle scales and stainless steel screws, pivot and pocket clip. Razor sharp carbonized zirconium dioxide blade 3"or 75mm long and a total weight of 2oz or 58 grams. Note: UK and Australian Customs do not permit import by other than Military or Police units.

Ceramic 9mm Retractable cutter (with one blade installed)A significant quantity of these cutters and blades go into commercial use.These blades will fit any commonly used 9mm retractable blade handle and many customers prefer to purchase blades and then fit to handles that best suit their applications. No metallic components in this holder. The blade has snap off segments and measures 3.25"or 8cm long by 9mm high.

Ceramic 18mm Retractable Cutter (one blade installed)The big daddy of retractable cutters. This is a more robust ceramic tool. Blade length 4.25" or 10.6cm and 18mm high.

Kirintec10 Old Gloucester RoadRoss on Wye HR9 5PBUnited Kingdom

T: +44 (0) 1989 568 350F: +44 (0) 1989 568 351info@kirintec.comwww.kirintec.com

EOD Tools

Ceramic Knives and ToolsA selection of tools for use worldwide

Ceramic Knives and Tools

US Office6832 Old Dominion DriveSuite 206 McLean VA22101Tel: 703.448.0440

Ceramic Utility Knife blade Stanley StyleThese blades will fit any common utility knive that takes the Stanley style of trapezoidal blade. Cutting edge is 2.375" long or 7cm

Ceramic Bladed ScissorsSmall reinforced plastic scissors with CERAMIC blade inserts. The pivot is 304 Stainless with reduced magnetic signature. Overall length is 5“ or 125mm and blades are 2.25" long, 5.6cm with weight of 1oz, or 31gms. These are marked EOD but do certainly have other applications such as cutting Kevlar or other new super strong fabrics and lines. Finger holes are actually large enough for a man’s hand.

Straight TweezerPoint 1mm wide, with ridges, 125mm

Ceramic Tweezers

Curved TweezerPoint, curved, 125mm

Ceramic - Zip Cutting Hook

A super-efficient slicing tool that makes the most of its simple design and sturdy construction.

The blade is sturdy non-magnetic ceramic. 140mmx85mmWeight 5.2g

Kirintec10 Old Gloucester RoadRoss on Wye HR9 5PBUnited Kingdom

T: +44 (0) 1989 568 350F: +44 (0) 1989 568 351info@kirintec.comwww.kirintec.com

EOD Tools

Ceramic Knives and ToolsA selection of tools for use worldwide

Ceramic Knives and Tools

US Office6832 Old Dominion DriveSuite 206 McLean VA22101Tel: 703.448.0440

KORONA non-explosive command wire cutter kitA rugged, spring-loaded, remotely line-triggered and highly reliable non-explosive wire cutter for silently cutting command wire, arming wire or pull cord command lines. Ceramic blades cut a 14mm section out of the wire, preventing any possible short- circuit activating the IED

The Korona wire cutter is a simple tool for rapid deployment during routine route clearance and isolation of vulnerable points by dismounted troops.

Key features:

• Manual spring-wound firing mechanism• Trigger weight of 786g (28oz)• Silent operation• Remaining wire is released• Cuts multi-stranded copper core wire upto 7mm diameter• Blades rotate to offer multiple fresh cutting edges• Blades are easily replaced in minutes• Non-conductive chemical-resistant mechanism and housing• Sealed mechanism to prevent ingress of sand and dust• Double safety mechanism to prevent misfire• Tether points to anchor cutter and prevent pull back of wire when blades slice through the wire

Kirintec10 Old Gloucester RoadRoss on Wye HR9 5PBUnited Kingdom

T: +44 (0) 1989 568 350F: +44 (0) 1989 568 351info@kirintec.comwww.kirintec.com

EOD Tools

Ceramic Knives and ToolsA selection of tools for use worldwide

Ceramic Knives and Tools

US Office6832 Old Dominion DriveSuite 206 McLean VA22101Tel: 703.448.0440

K-Cutter electronic wire cutterDiscreet single use miniature wire cutter

The K-Cutter provides a single shot, miniature explosive wire cutting capability, that is high power but very discreet. Due to the high level of engineering and testing undertaken in the development of the K-Cutter, Kirintec has been able to officially remove the Class 1 Hazardous Classification usually required for pyrotechnic items of this kind, thus removing the need for explosive storage and transportation regulations to be followed when brought into service.

This dramatically reduces the through life costs of the product and increases the operational scope and use of the K-Cutter as a specialist cutting tool. All test data and certificates pertaining to the Class 1 Exclusion are available on request.