Upload
others
View
4
Download
0
Embed Size (px)
Citation preview
NEW LOOKS. NEW IDEAS.
1
THURSDAYS 9/8C ON FOX
Waypoint® and HOME FREE are back on FOX.
Join hosts Mike Holmes and Tim Tebow
Thursdays @ 9 pm (Eastern) for the ultimate
home building chal lenge as contestants
compete to win the ultimate dream house—
not for themselves, but for their personal hero.
EPISODE 5 CAPE COD KITCHEN
NEW LOOKS. NEW IDEAS.
2
FOX HOME FREE—EPISODE 5 CAPE COD KITCHEN
NEW LOOKS. NEW IDEAS.
3
FOX HOME FREE—EPISODE 5 CAPE COD KITCHEN
NEW LOOKS. NEW IDEAS.
4
FOX HOME FREE—EPISODE 5 CAPE COD KITCHEN
NEW LOOKS. NEW IDEAS.
5
FOX HOME FREE—EPISODE 5 CAPE COD KITCHEN
NEW LOOKS. NEW IDEAS.
6
It is the responsibility of the designer and installer to order the correct doors, hardware and any required moldings and accessories. Waypoint Living Spaces® cannot foresee every design contingency and cannot be held responsible for incorrect door sizes, improper installation or other design or installation problems. Waypoint® provides these drawings as a design suggestion only and disclaims any and all liability. These solutions may or may not be suitable for your application.
Designed: 04/21/16 Printed: 04/21/16
This is an original design and must not be released or copied unless applicable fee has been paid or job order placed.__________________________________ Jennifer L. LeMarr, CKD
All dimensions & size designations given are subject to verification on job site and adjustment to fit job conditions.
Scale : 0 7/16" = 1' Drawing #: 1 F Cape Cod Kitchen Episode 205 FINAL FLIPPED.kit
BSS3
6R W
D
BTDP9
BWBT21-2 FHDSB36 BUTT
DB15 DB30
B18L DB24 4DWR B18R
W3042 BUTT
W1542L
W1542R
W3042 BUTT
W2142LW2142RFS4812
W3042 BUTT
W3618 X 24 DP BUTT
106 14 "
129"
48" 36"
42"
781 2"
781 2"
30" 62 18 "
74 18 "
158 18 "
157"
22 34 "
66"
67"66"
24"42"
21"3
12 "3
12 "67"
3 12 "60"3 1
2 "
WAYPOINT LIVING SPACES HOME FREE - SEASON 2 CAPE COD EPISODE 205 KITCHEN CABINETS: 610S PAINTED STONE HARDWARE: TBD
TOP MLDG: LCM8, S4S696, CTM8FINISH BELOW CABINET: (4)TEP, SIM8TOE MLDG: BTK8ISLAND TOE: S4S696CH: 108"
BLOCK 6"
REF. CABINETS 30" DEEP
2-DWTEP961-DWTEP842-UF342UF342 HORIZONTAL
DISHWASHERB12 FHRFEDMDB
W3612 X 24 DP BUTT
RHVENT 960RHLINER36S SL1RHVENT 390RRHLINER36S
FEDMDW42OFD/MI
CLR GLS
OFD/MICLR GLS/FE
OFD/MICLR GLS/FE
OFD/MI
CLR GLS
OFD/MI
CLR GLS/FE
UF3
UF3
B24 BUTT
FH CC2FWT
UF3/BOF3
UF6/BOF3
B24 BUTT
FH CC4FWT
DMDW42 DMDW42
2-UF3422-WOF342
OFD/MI
CLR GLS/FE
OFD/MI
CLR GLS
CFTK L CFTK R
DB15 WTCD
W1818RW1830R W3318 BUTT
W1818LW1830LW1818L
UF380/TOF384
W3318 BUTTW3330 BUTTW3318 BUTT
S4S696/TOF384
UF342/WOF342
FEFE
FP96344-DR1530
WBEPDR2130
WBEPDR2130
PDL PDL
PDLPDL
2-FL36
C
C
L
C
L
CL L
GENERAL NOTES:INSTALL CABINETS PER PLAN.PLANE FRAMES AS NECESSARY TO ENSURE TIGHT FIT.INSTALL HARDWARE USING 1" FLAT-HEAD SCREW ON DOORS.INSTALL ACCESSORIES/MOLDINGS PER DRAWINGS. COUNTERSINK NAILS USED IN MLDG INSTALLATION.
FOX HOME FREE—EPISODE 5 CAPE COD KITCHEN
NEW LOOKS. NEW IDEAS.
7
It is the responsibility of the designer and installer to order the correct doors, hardware and any required moldings and accessories. Waypoint Living Spaces® cannot foresee every design contingency and cannot be held responsible for incorrect door sizes, improper installation or other design or installation problems. Waypoint® provides these drawings as a design suggestion only and disclaims any and all liability. These solutions may or may not be suitable for your application.
Designed: 04/21/16 Printed: 04/21/16
Note: This drawing is an artistic interpretation of the general appearance of the design. It is not meant to be an exact rendition.
Drawing #: 1 F Cape Cod Kitchen Episode 205 FINAL FLIPPED.kit
FOX HOME FREE—EPISODE 5 CAPE COD KITCHEN
NEW LOOKS. NEW IDEAS.
8
It is the responsibility of the designer and installer to order the correct doors, hardware and any required moldings and accessories. Waypoint Living Spaces® cannot foresee every design contingency and cannot be held responsible for incorrect door sizes, improper installation or other design or installation problems. Waypoint® provides these drawings as a design suggestion only and disclaims any and all liability. These solutions may or may not be suitable for your application.
Designed: 04/21/16 Printed: 04/21/16
Note: This drawing is an artistic interpretation of the general appearance of the design. It is not meant to be an exact rendition.
Drawing #: 1 F Cape Cod Kitchen Episode 205 FINAL FLIPPED.kit
FOX HOME FREE—EPISODE 5 CAPE COD KITCHEN
NEW LOOKS. NEW IDEAS.
9
It is the responsibility of the designer and installer to order the correct doors, hardware and any required moldings and accessories. Waypoint Living Spaces® cannot foresee every design contingency and cannot be held responsible for incorrect door sizes, improper installation or other design or installation problems. Waypoint® provides these drawings as a design suggestion only and disclaims any and all liability. These solutions may or may not be suitable for your application.
Designed: 04/21/16 Printed: 04/21/16
This is an original design and must not be released or copied unless applicable fee has been paid or job order placed.__________________________________ Jennifer L. LeMarr, CKD
All dimensions & size designations given are subject to verification on job site and adjustment to fit job conditions.
Scale : 0 3/8" = 1' Drawing #: 1 El 1 Cape Cod Kitchen Episode 205 FINAL FLIPPED.kit
W1830R
W1818R
W3318 BUTT
W1830L
W1818L
W3318 BUTT
W3330 BUTT
W3318 BUTT
W1818R
DB15 DB30
W3618 X 24 DP BUTT
W3612 X 24 DP BUTT
30"34 "
55 8"
541 8"
33" 18"
18"
121 8"
181 8"
15" 37 34 "
3 12"
102
3 8"
12" 3 12 "
18"2 1
2 "34 "
12 "
36"
34 "
481 4"
841 4"
15"
129"
DB15 WTCD
2-DWTEP96/1-DWTEP84
INSTALL NOTES:INSTALL WALL CABINETS AT 102-3/8" AFF PER PLAN.CREATE VOID CORNER: INSTALL UF3/UF6 MITERED & ATTACH OVERLAY FILLERS.CREATE REF. ENCLOSURE AT 37" WIDE x 30" DEEP: USE DEEP WOOD TALL END PANELS: LEFT SIDE BOTTOM SECTION (DWTEP84) AT 36" HIGH x TOP SECTION (DWTEP96): 66-3/8" H (TO HIDE SEAM AT BASE CABINET/COUNTERTOP HEIGHT) RIGHT SIDE BOTTOM SECTION (DWTEP96) 84" HIGH x TOP SECTION (DWTEP96): 18-1/8" H USE SM8 SCRIBE MOLDING TO COVER SEAM ON RIGHT SIDE.TRIM UF380 TO 2-1/2" W x 66-3/8" H & INSTALL AT RIGHT OF STACKED WALL CABINETS.TRIM UF3 TO 1/2" WIDE x 18-1/8" HIGH & INSTALL AT LEFT WALL ON COUNTERTOP.INSTALL W3318 BUTT AT LEFT WALL/ADJACENT UF3.TRIM S4S696 TO 3-1/2" WIDE x 48-1/4" HIGH INSTALL ON TOP OF W3318 BUTT TO CREATE VOID CORNER; ENSURE W1830L LINES UP WITH EDGE OF W3318 BUTT.ATTACH OVERLAY FILLERS (TOF, BOF) AS NOTED; CENTERED ON FILLER. TRIM 2-TOF384 TO 66-3/8" HIGH; SAND & FINISH RAW EDGE & INSTALL AT TOP ON LEFT FILLER/BOTTOM AT COUNTERTOP ON RIGHT. INSTALL CLASSIC FURNITURE TOE KICK CORNERS AS SHOWN BELOW 15" DRAWER BASES.
UF3/BOF3
S4S696/TOF384
UF342
UF342 HORIZONTAL
SM8 MOLDING TO COVER SEAM
UF380
UF3AT 1/2" WIDE
CFTK L CFTK R
24" 3"
12"
108"
FOX HOME FREE—EPISODE 5 CAPE COD KITCHEN
NEW LOOKS. NEW IDEAS.
10
It is the responsibility of the designer and installer to order the correct doors, hardware and any required moldings and accessories. Waypoint Living Spaces® cannot foresee every design contingency and cannot be held responsible for incorrect door sizes, improper installation or other design or installation problems. Waypoint® provides these drawings as a design suggestion only and disclaims any and all liability. These solutions may or may not be suitable for your application.
Designed: 04/21/16 Printed: 04/21/16
This is an original design and must not be released or copied unless applicable fee has been paid or job order placed.__________________________________ Jennifer L. LeMarr, CKD
All dimensions & size designations given are subject to verification on job site and adjustment to fit job conditions.
Scale : 0 7/16" = 1' Drawing #: 1 El 2 Cape Cod Kitchen Episode 205 FINAL FLIPPED.kit
W3042 BUTTW1542RW1542LW3042 BUTT
BSS36R WD BTDP9
36" 24"12 "
FEFE
OFD/MICLR GLS
OFD/MICLR GLS OFD/MI
CLR GLSOFD/MICLR GLS
INSTALL NOTES:INSTALL WALL CABINETS AT 96-1/4" AFF PER PLAN.CREATE VOIDED BASE CORNER: INSTALL UF6/UF3 MITERED; ATTACH OVERLAY FILLERS.CREATE VOIDED WALL CORNER: INSTALL UF342 FILLERS MITERED & ATTACH OVERLAY FILLERS.ATTACH OVERLAY FILLERS (WOF, BOF) AS NOTED; CENTERED ON FILLER.TRIM UF3 TO 1/2" WIDE OR AS NEEDED & INSTALL RIGHT OF BSS36 CORNER.INSTALL TOP MOLDING BUILDUP TO ACCOMMODATE FOR DEPTH OF HOOD.PLEASE NOTE: TEP, TALL END PANEL MATERIAL TO FINISH BOTTOM OF WALL CABINETS; COVER FRONT EDGE W/SIM8 MOLDING.
UF342/WOF342
UF342/WOF342
UF6/BOF3
B24 BUTT FH CC4FWT
B24 BUTT FH CC2FWT
UF3
421 8"
30"15"
541 8"
15" 37"
961 4"
12"3"
157"
113 4"
24"3 12 "
30"15"
9"24"
108"
36"
FOX HOME FREE—EPISODE 5 CAPE COD KITCHEN
NEW LOOKS. NEW IDEAS.
11
It is the responsibility of the designer and installer to order the correct doors, hardware and any required moldings and accessories. Waypoint Living Spaces® cannot foresee every design contingency and cannot be held responsible for incorrect door sizes, improper installation or other design or installation problems. Waypoint® provides these drawings as a design suggestion only and disclaims any and all liability. These solutions may or may not be suitable for your application.
Designed: 04/21/16 Printed: 04/21/16
This is an original design and must not be released or copied unless applicable fee has been paid or job order placed.__________________________________ Jennifer L. LeMarr, CKD
All dimensions & size designations given are subject to verification on job site and adjustment to fit job conditions.
Scale : 0 7/16" = 1' Drawing #: 1 El 3 Cape Cod Kitchen Episode 205 FINAL FLIPPED.kit
W3042 BUTTW2142L W2142R
FS4812
DSB36 BUTTBWBT21-2 FH BSS36R WD
12"
113 4"
30"
42"
36"
74 18 " 36"
21" 15"
48"
30"34 "
413 8"
40 12 "
34 "21"
541 8"
3 4"
28 38 "
34 "
158 18 "
DMDB
DMDW42 DMDW42
INSTALL NOTES:INSTALL WALL CABINETS AT 96-1/4" AFF PER PLAN.ATTACH OVERLAY FILLERS (WOF) AS NOTED; CENTERED ON FILLER.CREATE VOIDED WALL CORNER: INSTALL UF342 FILLERS MITRED & ATTACH OVERLAY FILLERS.TRIM FS4812 TO 40-1/2" WIDE x DEPTH & INSTALL BEHIND TOP MOLDING BUILDUP TO RUN MOLDING ACROSS TOP OF WINDOW; NOT VISIBLE FROM FRONT.USE 2-FL36 SINK FRONT FLOOR TO SUPPORT APRON FRONT SINK AT SIDES (SEE ATTACHED DETAIL)PLEASE NOTE: TEP, TALL END PANEL MATERIAL TO FINISH BOTTOM OF WALL CABINETS; COVER FRONT EDGE W/SIM8 MOLDING
OFD/MICLR GLS
28 38 "
OFD/MICLR GLS
OFD/MICLR GLS
DMDW42
2-FL36
FE
FE
FEFE
UF342WOF342
B12 FHR
108"
36"
40 12 "
34 "
21" 24" 36"
FOX HOME FREE—EPISODE 5 CAPE COD KITCHEN
NEW LOOKS. NEW IDEAS.
12
Designed: 04/21/16 Printed: 04/21/16
This is an original design and must not be released or copied unless applicable fee has been paid or job order placed.__________________________________ Jennifer L. LeMarr, CKD
All dimensions & size designations given are subject to verification on job site and adjustment to fit job conditions.
Scale : 0 1/2" = 1' Drawing #: 1 El 4 Cape Cod Kitchen Episode 205 FINAL FLIPPED.kit
341 2"
11 2"
36"
67"
FP96344-DR1530
WBEPDR2130
WBEPDR2130
INSTALL NOTES:INSTALL ISLAND CABINETS PER PLAN.INSTALL PDL DECORATIVE LEGS AT EACH CORNER.TRIM WBEP TO 21" WIDE & INSTALL BETWEEN DECORATIVE LEGS AT EACH END AND APPLY DR2130 DECORATOR DOORS.APPLY FP9634 FINISHED PANEL TO ISLAND BACK AND INSTALL 4-DR1530s CENTERED.
S4S696 FLUSH
FOX HOME FREE—EPISODE 5 CAPE COD KITCHEN
NEW LOOKS. NEW IDEAS.
13
Designed: 04/21/16 Printed: 04/21/16
This is an original design and must not be released or copied unless applicable fee has been paid or job order placed.__________________________________ Jennifer L. LeMarr, CKD
All dimensions & size designations given are subject to verification on job site and adjustment to fit job conditions.
Scale : 0 1/2" = 1' Drawing #: 1 El 5 Cape Cod Kitchen Episode 205 FINAL FLIPPED.kit
B18L DB24 4DWR B18R
67"
341 2"
11 2"
36"
INSTALL NOTES:INSTALL ISLAND CABINETS PER PLAN.INSTALL PDL DECORATIVE LEGS AT EACH CORNER.TRIM WBEP TO 21" WIDE & INSTALL BETWEEN DECORATIVE LEGS AT EACH END AND APPLY DR2130 DECORATOR DOORS.APPLY FP9634 FINISHED PANEL TO ISLAND BACK AND INSTALL 4-DR1530s CENTERED.
S4S696 RECESSED
FOX HOME FREE—EPISODE 5 CAPE COD KITCHEN
NEW LOOKS. NEW IDEAS.
14
It is the responsibility of the designer and installer to order the correct doors, hardware and any required moldings and accessories. Waypoint Living Spaces® cannot foresee every design contingency and cannot be held responsible for incorrect door sizes, improper installation or other design or installation problems. Waypoint® provides these drawings as a design suggestion only and disclaims any and all liability. These solutions may or may not be suitable for your application.
ADJUST TO CEILINGON STACKEDCABINET WALL
5" HIGH ON 96-1/4"AFF CABINETS
TOP MOLDING
FOX HOME FREE—EPISODE 5 CAPE COD KITCHEN
NEW LOOKS. NEW IDEAS.
15
It is the responsibility of the designer and installer to order the correct doors, hardware and any required moldings and accessories. Waypoint Living Spaces® cannot foresee every design contingency and cannot be held responsible for incorrect door sizes, improper installation or other design or installation problems. Waypoint® provides these drawings as a design suggestion only and disclaims any and all liability. These solutions may or may not be suitable for your application.
FOX HOME FREE—EPISODE 5 CAPE COD KITCHEN
TOE MOLDING
FSS696S4S696