Crack works on x86 based systemIt is checked for Windows 7,
Windows 8 and Windows 811)Run Command Promt as Administrator2)Copy
Crack to C drive3)Type in Command Promt C:4)Type in Command Promt
cd .. so many times until You get C:/5)Type in Command Promt cd
Crack6)Type in Command Promt SETUP7)Several times press Y8)At the
end press ENTER9)Type EXIT or just close Command PromtI had the
same problems that there is no license names just numbersTo fix
this problem first install EPLAN 2.2 and then uninstall it and
install 2.3Maybe there is another solution but I discover that
uninstalling 2.2 and then installing 2.3 there is not such of
mistakes.
Hello all again!Finally I test x64 installation too.Here is
crack!http://www.filedropper.com/eplan23-64bit1. Install Eplan P8
2.32. Copy the license file (SN-U10066.EGF)
C:\Users\Public\EPLAN\Common;3. SN-U10066.reg run the file and add
data to the registry;
4. Press Win+R keys together to open the run dialog box and type
- gpedit.msc5. Expand the folders in order or - - - .6. On the
right you will see a icon , double click that7. Click button at the
top, and at the bottom to ignor any signature check.8. hit apply,
ok and close everything9. Reboot10. Press Win+R keys together to
open the run dialog box and type - cmd11. Type in terminal -
bcdedit.exe -set loadoptions DDISABLE_INTEGRITY_CHECKS12. Type in
terminal - bcdedit.exe -set TESTSIGNING ON13. Reboot
14. Run the driver installation Multikey - emulator from your
Release \ MultiKey64 \ install.cmd15. Reboot your computer16. Run
Eplan and choose necessary
licensehttp://thehotfix.net/forums/index.php?/topic/25436-...64-bit-windows-7http://thehotfix.net/forums/index.php?/topic/26821-...orcement-problemFor
me this works perfect using EPLAN Electric P8, EPLAN PPE, EPLAN
FLUID, EPLANPROPANEL
