Epoxy And Injection Tools - warwickIntro · Epoxy And Injection Tools ... No. Description Box Ctn. ... load capacities and vibration resistance of adhesive anchors. Designed

115

TOLL FREE: 1-877-29-BOLTS • 1-877-292-6587 WEBSITE: www.warwickfasteners.com

50 Pennsylvania Avenue • Warwick, Rhode Island 02888

Fast

ener

s &

Hard

war

eAn

chor

sDr

illing

,Tap

ping

& Cu

tting

Abra

sives

&Di

amon

d Pro

ducts

Tool

s &

Acce

ssor

ies

Stru

tFi

rest

opCo

ntra

ctor

Supp

lies

Epoxy And Injection Tools

Power-Fast® Epoxy Injection Gel

• Base Material: Solid Concrete, Block, Brick, Stone or HollowMasonry

• Size Range: 1/4" x to 1-1/2" anchor rod, No. 3 to No. 11 reinforcingbar

• Anchor Material: Epoxy Standard Set and Fast Set

The Power-Fast® Epoxy Injection Gel is a two component low odorstructural epoxy used for anchoring threaded rods, bolts, reinforcingbars, and smooth dowels into concrete and other solid base materials.The system can also be used to anchor into hollow masonry materialsusing threaded rod and screen tubes.

Power-Fast® Cartridges

Part Std. Std.No. Description Box Ctn.

P8400 10 Fluid Ounce Cartridge - Fast Set 1 12P8402 15 Fluid Ounce Cartridge - Fast Set 1 12P8422 24 Fluid Ounce Cartridge - Fast Set 1 12P8403 15 Fluid Ounce Cartridge - Std. Set 1 12P8423 24 Fluid Ounce Cartridge - Std. Set 1 12P8436 56 Fluid Ounce Cartridge - Std. Set 1 12

*Cartridges fit Ramset E101 Manual Dispensing Tool

** Also available in Bulk

Cartridge System Nozzle

Powers mixing nozzles for 1:1 ratio cartridges have a pre-mounted nutand a unique break away extension tip. This unique design allows onenozzle to be used with all anchor hole sizes. On small jobs, anchorholes as small as 5/6" in diameter and 6" in depth can be easily filled.For larger jobs, the nozzle can reach a depth of up to 14" in anchorholes 11/16" and larger. For deeper holes, use the extension tubing list-ed in the Installation Accessories section.

Part Hole Hole Std. Std.No. Description Size Depth Box Ctn.

P7908 1/2" Nozzle/Nut 5/16" 6" 2 24P7919 1/2" Nozzle/Nut 11/16" 14" 400 400

10 And 15 Fluid Ounce Cartridge Tool


P8416 Manual Cartridge Tool 1 6

24 Fluid Ounce Cartridge Tool

• This tool will also accept the 10 and 15 fluid ounce cartridges.


P8418 Manual Injection Tool 1 6

Pneumatic Injection Tools

The Powers Cartridge System pneumatic injection tools are designed forlarge volume jobs.

10 And 15 Fluid Ounce Cartridge Tool


P8407 Pneumatic Injection Tool 1 1

24 Fluid Ounce Cartridge Tool


P8419 Pneumatic Injection Tool 1 1

Normal Operating Range - 80 to 100 psiMaximum Free Air Required - 1 CFM based on average use

War_97_134 5/13/04 11:04 AM Page 115

116



Fasteners &Hardw

areAnchors

Drilling,Tapping& Cutting

Abrasives &Diamond Products

Tools &Accessories

StrutFirestop

ContractorSupplies

Anchor Seal Plugs, ScreenTubes And Threaded Rods

Anchor Seal Plugs

The following anchor seal plugs are designed for use with anchorinstallations in ceilings and wall applications. The plugs help retain theadhesive in the anchor hole and hold the anchor rod centered in thehole until the adhesive sets. The plugs are described by the anchor roddiameter they are used with and will fit the hole size indicated when itis drilled with a bit meeting the requirements of ANSI StandardB212.15.

Part Plug Hole Std.No. Description Depth Size Ctn.

P7936 3/8" Anchor Seal Plug 3/8" 7/16" 25P7937 1/2" Anchor Seal Plug 1/2" 9/16" 25P7938 5/8" Anchor Seal Plug 9/16" 3/4" 20P7939 3/4" Anchor Seal Plug 3/4" 7/8" 20P7940 7/8" Anchor Seal Plug 3/4" 1" 10P7941 1" Anchor Seal Plug 3/4" 1-1/8" 10P7942 1-1/4" Anchor Seal Plug 7/8" 1-3/8" 10

Stainless Steel Screen Tubes

Screen Tubes are made from a 300 series stainless steel. The nominaldiameter of the screen listed indicates the matching rod diameter.

Part Drill Std.No. Description Dia. Ctn.

P7960 1/4" x 2" Screen Tube* 3/8" 25P7862 1/4" x 6" Screen Tube* 3/8" 25P7864 1/4" x 8" Screen Tube* 3/8" 25P7866 1/4" x 10" Screen Tube* 3/8" 25P7961 3/8" x 3-1/2" Screen Tube* 1/2" 25P7962 3/8" x 6" Screen Tube* 1/2" 25P7963 3/8" x 8" Screen Tube* 1/2" 25P7964 3/8" x 10" Screen Tube* 1/2" 25P7959 3/8" x 12" Screen Tube* 1/2" 25P7965 1/2" x 3-1/2" Screen Tube 5/8" 25P7966 1/2" x 6" Screen Tube 5/8" 25P7967 1/2" x 8" Screen Tube* 5/8" 25P7968 1/2" x 10" Screen Tube* 5/8" 25P7969 5/8" x 4-1/2" Screen Tube 3/4" 20P7970 5/8" x 6" Screen Tube 3/4" 20P7971 5/8" x 8" Screen Tube* 3/4" 20P7972 5/8" x 10" Screen Tube* 3/4" 10P7976* 5/8" x 8" Combo Kit - Includes ten 1" 10

15/16" x 8" screen and ten steelinsert tubes with a plastic plug.

Stainless Steel Screen Tubes (Cont.)


P7973 3/4" x 6" Screen Tube 7/8" 10P7977 3/4" x 8" Screen Tube 7/8" 10P7974 3/4" x 10" Screen Tube 7/8" 10P7975 3/4" x 13" Screen Tube 7/8" 10P7978* 3/4" x 17" Screen Tube* 7/8" 10P7979* 3/4" x 21" Screen Tube* 7/8" 10

* These kits include extension tubing.

Plastic Screen Tubes

The nominal diameter of the screen listed indicates the matching roddiameter. Note that hole size required for 1/4" and 3/8" plastic screentubes is different than that for the stainless steel tubes.


P8470 1/4" x 1-3/4" Screen Tube 1/2" 25P8473 3/8" x 2-3/4" Screen Tube 9/16" 25P8474 3/8" x 3-1/2" Screen Tube 9/16" 25P8475 1/2" x 3-1/4" Screen Tube 5/8" 25P8476 1/2" x 4" Screen Tube 5/8" 25

Straight Cut Threaded Rod

Straight cut rod and bent rod are provided in the materials listed belowand include nuts/washers.

A307 Threaded Anchor Rod, Zinc Plated(ASTM B 633, Clear Chromate)


P7980 1/4" x 3" Anchor Rod 1/4" x 2" 25P7981 3/8" x 5-1/2" Anchor Rod 3/8" x 3-1/2" 25P7985 1/2" x 5-1/2" Anchor Rod 1/2" x 3-1/2" 25P7986 1/2" x 8" Anchor Rod 1/2" x 6" 25P7987 1/2" x 10" Anchor Rod 1/2" x 8" 25P7988 1/2" x 12" Anchor Rod 1/2" x 10" 25P7989 5/8" x 6-1/2" Anchor Rod 5/8" x 4-1/2" 20P7990 5/8" x 8" Anchor Rod 5/8" x 6" 20P7991 5/8" x 10" Anchor Rod 5/8"x8" or Combo Kit 20P7993 3/4" x 9" Anchor Rod 3/4" x 6" 10P7994 3/4" x 12" Anchor Rod 3/4" x 8" 10P7995 3/4" x 16" Anchor Rod 3/4" x 13" 10

War_97_134 5/13/04 11:04 AM Page 116

117



Fast

ener

s &

Hard

war

eAn

chor

sDr

illing

,Tap

ping

& Cu

tting

Abra

sives

&Di

amon

d Pro

ducts

Tool

s &

Acce

ssor

ies

Stru

tFi

rest

opCo

ntra

ctor

Supp

lies

Chemical Anchors, AdhesiveAnd Injection Tools

Chem-Bolt® Anchors

The Chem-Bolt® anchor is a unique, patented product combining thefeatures typically associated with expansion type anchors, with the highload capacities and vibration resistance of adhesive anchors. Designedfor use with injection type adhesive systems, the Chem-Bolt® allows afixture to be installed using a finished head anchoring device which canbe tightened, or advanced as well as completely removed, after theadhesive has cured. The use of costly inserts is eliminated when theChem-Bolt® anchor is used. Chem-Bolt® anchors are supplied in 3/8",1/2", 5/8", and 3/4" diameters and several lengths.

Chem-Bolt® Grade 5 Steel (Yellow Cap)

Part Drill Std. Std.No. Description Dia. Box Ctn.

P8861 Chem-Bolt® 1/4" x 1-1/2" 5/16" 100 500P8862 Chem-Bolt® 1/4" x 2" 5/16" 100 500P8863 Chem-Bolt® 1/4" x 3" 5/16" 100 500P8864 Chem-Bolt® 3/8" x 4" 7/16" 50 250P8865 Chem-Bolt® 3/8" x 6" 7/16" 50 200P8866 Chem-Bolt® 1/2" x 4" 9/16" 25 100P8867 Chem-Bolt® 1/2" x 6" 9/16" 25 100P8868 Chem-Bolt® 1/2" x 8" 9/16" 25 75P8860 Chem-Bolt® 5/8" x 4" 3/4" 25 75P8869 Chem-Bolt® 5/8" x 6" 3/4" 25 75P8870 Chem-Bolt® 5/8" x 8" 3/4" 25 75P8871 Chem-Bolt® 5/8" x 10" 3/4" 25 75P8872 Chem-Bolt® 3/4" x 6" 7/8" 10 30P8873 Chem-Bolt® 3/4" x 8" 7/8" 10 30P8874 Chem-Bolt® 3/4" x 10" 7/8" 10 30

AC100PLUS™ All Weather Adhesive


• Size Range: 3/8" to 1" anchor rod, No. 3 to No. 8 reinforcing bar• Anchor Material: Epoxy Acrylate

The “PLUS” range of adhesive technology adopts the traditional “mixin the nozzle” method of delivery. The proprietary characteristics arereflected in the chemical nature of the “PLUS” range, allowing us tocreate an epoxy acrylate that is styrene free with 0% volatile organiccompounds (VOC’s). Other inherent properties of our material and its

convenient delivery through existing manual and pneumatic dispensingtools currently on the market, make high load concrete anchoring cost-effective and time efficient.

AC100PLUS™


P8480 AC100PLUS™ 8 fl. oz. Tube in poly 12 12bag with one Nozzle






P8484 Delivery system for AC100PLUS™ 1 68 fl. oz. (P8480)


P8494 Delivery system for AC100PLUS™ 1 130 fl. oz. (P8490)

War_97_134 5/13/04 11:04 AM Page 117

118



Fasteners &Hardw

areAnchors



Tools &Accessories

StrutFirestop

ContractorSupplies

Adhesive Injection Tools (Cont.)And Adhesive Anchoring

Systems

AC100PLUS™ (Cont.)


P8496 Pneumatic delivery system for 1 1AC100PLUS™ 30 fl. oz.


P8485 High Performance delivery system for 1 20AC100PLUS™ 8 fl. oz. (P8480) andAC100PLUS™ 12 fl. oz. (P8486)


P8498 Extra nozzle for AC100PLUS™ 24 24230 fl. oz. (P8490)


P8482 Extra nozzle for AC100PLUS™ 12 1448 fl. oz. (P8480) and AC100PLUS™

12 fl. oz. (P8486)

AC5.5PLUS™ Adhesive AnchoringSystem


• Size Range: 3/8" to 1" anchor rod, No. 3 to No. 8 reinforcing bar• Anchor Material: Epoxy Acrylate (same material as AC100PLUS™)

The “PLUS” range of adhesive technology adopts the traditional “mixin the nozzle” method of delivery. The proprietary characteristics arereflected in the chemical nature of the “PLUS” range, allowing us tocreate an epoxy acrylate that is styrene free with 0% volatile organiccompounds (VOC’s). Other inherent properties of our material and itsconvenient delivery through existing manual and pneumatic dispensingtools currently on the market, make high load concrete anchoring cost-effective and time efficient.

AC5.5PLUS™ PusherAdhesive Anchoring System


P8462 5.5 fl. oz. Tube in poly bag with 12 361 Nozzle and 1 Pusher


P8461 Standard Caulking Gun for 1 12AC5.5PLUS™ Pusher (P8462)


P8482 Extra nozzle for AC5.5PLUS™ Twister 12 144and AC5.5PLUS™ Pusher (P8462)

War_97_134 5/13/04 11:04 AM Page 118

119



Fast

ener

s &

Hard

war

eAn

chor

sDr

illing

,Tap

ping

& Cu

tting

Abra

sives

&Di

amon

d Pro

ducts

Tool

s &

Acce

ssor

ies

Stru

tFi

rest

opCo

ntra

ctor

Supp

lies

Adhesive And Injection Tools

Dowel-Fast®

Rebar Doweling Adhesive

• Base Material: Solid Concrete• Size Range: No. 3 to No. 10 reinforcing bar, 3/8" x to 1-1/4" anchor

rod• Anchor Material: Two Component Epoxy

The Dowel-Fast® system is a two component epoxy which is designedfor medium duty adhesive applications such as the installation of rein-forcing bars, steel threaded anchor rod, and threaded bolts into concrete.It is packaged in specially designed 15 and 24 fluid ounce cartridges.

Dowel-Fast® Cartridges


P8405 Dowel-Fast® Cartridge - 15 fl. oz. 1 12P8425 Dowel-Fast® Cartridge - 24 fl. oz. 1 12

Mixing Nozzles

The Dowel-Fast® Cartridge is used with Powers 1:1 ratio mixing noz-zles which have a premounted nut and a break away extension tip. Thisunique design allows one nozzle to be used with all anchor hole sizes.Anchor holes as small as 5/16" in diameter and 6" in depth can be easi-ly filled. For larger jobs, anchor holes having a diameter of 11/16" andlarger with depths up to 14" can be filled without the use of extensiontubing.


P7908 1/2" Nozzle/Nut Assembly 5/16" 6" 2 2411/16" 14"

P7919 1/2" Nozzle/Nut Assembly 11/16" 14" 400 400

Dowel-Fast® Cartridge System Tools

Dowel-Fast® Cartridges can be dispensed from Powers manual or pneu-matic tools, for both the 15 and 24 fluid ounce cartridge sizes.


P8416 Manual (15 fl. oz. cart only) Tool 1 6P8407 Pneumatic (15 fl. oz. cart only) Tool 1 1P8418 Manual Tool (15 and 24 fl. oz. carts.) 1 6P8419 Pneumatic Tool (15 and 24 fl. oz. carts.) 1 1

Power-Bond® Pump• Base Material: Solid Concrete, Block, Brick, Stone or Masonry• Size Range: 3/8" to 1" anchor rod. No. 3 to No. 8 reinforcing bar• Anchor Material: Two Component Epoxy

The Power-Bond® Pump consists of a self contained 10 fluid ouncepump style cartridge in which the adhesive components are mixed. Astandard manually operated caulking tool can be used in the installationof threaded rod in solid concrete.


P8401 Power-Bond® 10 fl. oz. Pump Cartridge 12 36P8461 Powers Caulking Gun 1 12

Power-Bond® Dual Cartridge• Base Material: Solid Concrete, Block, Brick, Stone or Masonry• Size Range: 3/8" to 1" anchor rod. No. 3 to No. 8 reinforcing bar• Anchor Material: Two Component Epoxy

The Power-Bond® 1:1 Ratio Dual Cartridge system is a two component,lower viscosity epoxy which is designed for medium duty adhesiveapplications. It is packaged in a specially designed, 15 fluid ounce car-tridge which is dispensed using either a manual or pneumatically oper-ated injection tool.


P8404 Power-Bond® Cartridge - 15 fl. oz. 1 12

Mixing NozzlesThe Power-Bond® Dual Cartridge is used with Powers 1:1 ratio mixingnozzles which has a premounted nut and a break away extension tip.This unique design allows one nozzle to be used with all anchor holesizes. Anchor holes as small as 5/16" in diameter and 6" in depth can beeasily filled. For larger jobs, anchor holes having a diameter of 11/16"and larger with depths up to 14" can be filled without the use of exten-sion tubing.


P7908 1/2" Nozzle/Nut Assembly 5/16" 6" 2 2411/16" 14"

P7919 1/2" Nozzle/Nut Assembly 400 400

Power-Bond® 1:1 RatioDual Cartridge System Tools


P8416 Manual (15 fl. oz. cart. only) Tool 1 1P8407 Pneumatic (15 fl. oz. cart. only) Tool 1 1

War_97_134 5/13/04 11:04 AM Page 119

120



Fasteners &Hardw

areAnchors



Tools &Accessories

StrutFirestop

ContractorSupplies

Anchor Capsules AndExpanding Foams

Hammer-Capsule®

• Base Material: Solid Concrete• Size Range: 3/8" through 1" anchor rod, No. 3 to No. 8 reinforcing

bar• Anchor Material: Ester Based Resin

The Hammer-Capsule® System consists of a self contained, single use,two-part glass capsule into which threaded anchor rod or reinforcingbars can be directly driven without the need for a chisel point or spin-ning action. It is designed for use in the installation of 3/8" through 1"diameter threaded rod in solid concrete and masonry materials. It canalso be used to install reinforcing bars.

Hammer-Capsule® Selection Guide

Part *Drill Min. Std. Std.No. Size Dia. Depth Box Ctn.

P6702 3/8" 7/16" 3-1/2" 10 500P6703 1/2" 9/16" 4-1/2" 10 200P6704 5/8" 11/16" 5" 10 100P6705 3/4" 7/8" 6" 5 50P6706 7/8" 1" 7" 5 50P6707 1" 1-1/8" 8-1/4" 5 50

* The drill bit diameters and depths listed are for installations using threaded rod.

Powerfoam™/TriggerFoam™

• Base Material: Concrete, Masonry, Wood, Metal• Size Range: 12 oz., 29 oz., 31 oz., 10 lb. and 16 lb.• Material: Polyurethane

Powerfoam™ and TriggerFoam™ are one-part polyurethane expandingfoams that set and cure into their final form by reacting to moisture andhumidity present in the air. Their exceptional ability to bond allowsPowerfoam™ and TriggerFoam™ to be applied to various building ele-ments including the surfaces of concrete, brick, block, wood, steel, alu-minum and other miscellaneous metals. Powerfoam™ and TriggerFoam™

are safe to use, containing no CFC’s, no PCB’s and no UreaFormaldehyde. As they are being dispensed, Powerfoam™ andTriggerFoam™ have a neutral odor. Cured foam is physiologically harm-less. Foam products are offered in standard yellow and UV-resistantblack.

Powerfoam™


P8130 Powerfoam™ 12 oz. 12 12P8132 Powerfoam™ 29 oz. 12 12

TriggerFoam™


P8136 TriggerFoam™ 29 oz. 12 12

Black TriggerFoam™

Part Std. Std. Std.No. Description Box Ctn. Pallet

P8148 Black TriggerFoam™ 31 oz. 12 12 1152

Foam Starter Kit

Contains the following: (2) Powerfoam™ 29 oz., (2) TriggerFoam™

29 oz., (1) TriggerFoam™ Gun and (1) TriggerFoam™ Cleaner 20 oz.


P8129 Foam Starter Kit 1 1

SERVICEis our BUSINESS

War_97_134 5/13/04 11:04 AM Page 120

121



Fast

ener

s &

Hard

war

eAn

chor

sDr

illing

,Tap

ping

& Cu

tting

Abra

sives

&Di

amon

d Pro

ducts

Tool

s &

Acce

ssor

ies

Stru

tFi

rest

opCo

ntra

ctor

Supp

lies

Adhesives And FoamInjection Tools

TriggerFoam™ Subfloor Adhesive

• Base Material: Plywood, OSB, Particle Board, Concrete, Masonry,Metals, Formica, Polystyrene, Fiberglass

• Size Range: 24 oz.• Material: Polyurethane

TriggerFoam™ Subfloor Adhesive is a one-part polyurethane speciallydesigned for use as a subfloor adhesive to bond plywood, OrientedStrand Board (OSB), particle board and other wood sheathing.TriggerFoam™ Subfloor Adhesive’s superior adhesive characteristicshelp reduce nail heads from popping up, eliminate floor squeaks andwill insulate to dampen sound and conserve energy. TriggerFoam™

Subfloor Adhesive also provides an excellent bond to concrete, mason-ry, metals, formica, polystyrene, fiberglass and most common buildingelements. TriggerFoam™ Subfloor Adhesive contains no VolatileOrganic Compounds (VOC’s) and is styrene-free.


P8144 TriggerFoam™ Subfloor Adhesive 12 12 115224 oz.

TriggerFoam™

Construction Adhesive

• Base Material: Most Building Materials• Size Range: 31 oz.• Anchor Material: Polyurethane

TriggerFoam™ Construction Adhesive is a one-part polyurethane spe-cially designed for use as a general construction adhesive that bonds tomost building materials except polyethylene, Teflon®, silicone, oils andgreases. TriggerFoam™ Construction Adhesive is suited for many con-struction adhesive applications where a faster cure and shorter working(open) time is desired. TriggerFoam™ Construction Adhesive containsno Volatile Organic Compounds (VOC’s) and is solvent-free.


P8146 TriggerFoam™ Construction Adhesive 12 12 115231 oz.

TriggerFoam™

Tools And Accessories

Part Std. Std.No. Description Ctn. Pallet

P8139 TriggerFoam™ Plastic Gun 1 1P8140 TriggerFoam™ Gun 1 1P8141 TriggerFoam™ Gun replacement brass tip 1 10P8142 TriggerFoam™ Cleaner 20 oz. 12 12

Bulk TriggerFoam™

Part Std. Std.No. Description Ctn. Pallet

P8152 Bulk Foam 10 lb. unit with accessories 1 120P8154 Bulk Foam 16 lb. unit with accessories 1 80

One COMPLETESource

for INDUSTRIAL& CONTRACTOR

Supplies

War_97_134 5/13/04 11:04 AM Page 121

Documents

Epoxy And Injection Tools - warwickIntro · Epoxy And Injection Tools ... No. Description Box Ctn. ... load capacities and vibration resistance of adhesive anchors. Designed