www.garlockequip.com

TM

E Q U I P M E N T C O M P A N Y

Leaders In Professional Roofing Equipment

POWERED DECK EQUIPMENT

WATERPROOFING

COLD PROCESS

GROUND TO ROOF

ON-DECK EQUIPMENT

POWERED DECK EQUIPMENT

MUSTANG WORKHORSE

The walk-behind Mustang Workhorse powered by 5.5 hp Honda with forward and reverse power and three attachment options: Dump Hopper, #30 Debris Hopper and Gravel Spreader.

ROOF WARRIOR

#1 selling tear off machine in the U.S. with hydrostatic transaxle, forward and reverse, adjustable pitch blade and 11-hp Honda electric-start engine. Optional 30” straight blade or 18” tined blade. Dual wheel option also available.

R800 WORKHORSE

Ride-on convenience for large areas with 11 hp Honda power, 5 mph top speed, forward/reverse and short turning radius. High-lift option pictured. Forks standard with 30 cu-ft dump box and 36”gravel spreader optional.

ROCKER

An affordable rock-removal system that handles pea gravel up to 2 ½” rock. Clears up to 10-12 tons per hour( 20 squares). Hydrostatic transaxle for forward and reverse maneuverability. 11-hp Honda electric-start engine.

GS-36 SWEEPER

Adjust sweep angle 15 degrees left or right. Ergonomic operator controls and no-flat tires. Broom drive and propulsion with 5.5 hp Honda engine.

Adjust sweep angle 15 degrees left or right. Ergonomic operator controls and no-flat tires. Broom drive and propulsion

POW

ERED

DEC

K EQ

UIPM

ENT

ROTARY PLANER

Cleans off blisters, repairs gravel stops, prepares tie-ins, or performs large-scale patch work with four carbide-tipped bits. Provides a smooth, planed 12” wide surface for small and large BUR repairs. Powered by 10.5 HP Honda Engine.

ENFORCER TWIN SAW

Self-propelled, with hydrostatic drive increases production three times over single-blade cutters. 20-hp Honda electric-start engine.

ULTRA CUTTER MINI-SAW

Low 18” clearance, lightweight, and easy to maneuver. Quick-change belt, 5.5-hp Honda engine and floating blade guard. Two-inch wall clearance for cutting under vents, around air conditioners, and small patch work.

ULTRA CUTTER PRO SAW

Available in three models all with pivoting blade guard to ensure uniform contact with the roof surface and easier blade inspection. Choose from 9 or 13 hp Honda Power.

NO. 12 SCRATCHER

Leaves a 4-½” wide semi-smooth surface with 12 carbide pins. Adjustable depth and rotating speed for different surfaces. Powered by 5.5-hp Honda engine.

www.garlockequip.com

TM

E Q U I P M E N T C O M P A N Y

GSX SPRAY APPLICATOR

New method for spraying waterproofing on any horizontal or vertical surface. Up to 5 times faster than trowel methods on Plaza Decks, Roofs, Foundation Walls, Tunnels or Green Roofs/Gardens. Work safely by spraying material at temperatures below 260-degrees F. which is classified as cold-applied in most regions. Material capacities of 150, 230 or 410 gallons. Fully enclosed double boiler is oil jacketed for indirect heating. On-board digital system with automatic control of melter temperatures. Auger/Agitator eliminates temperature stratification and recirculation ensures fast heat upand recovery times.

TM

GSXWATERPROOFING

TM

RAM MOBILE RUBBERIZED ASPHALT MELTER

Oil-jacketed melter features a hot-air burner chamber that provides uniform heat in as little as 45 minutes. A powered agitator keeps materials suspended and redistributes heat. Draincock for gravity fed filling. Diesel fired burner with temperature controls and diesel-powered 6 hp Kubota or gas-powered 8.5 hp Kohler engine for agitator. Torsion suspended trailers for 150, 230 and 410-gallon capacity models.

Oil-jacketed melter features a hot-air burner chamber that provides uniform heat in as little as 45 minutes. A powered agitator keeps materials suspended and redistributes heat. Draincock for gravity fed filling. Diesel fired burner with temperature controls and diesel-powered 6 hp Kubota or gas-powered 8.5 hp Kohler engine for agitator. Torsion suspended trailers for 150, 230 and

RAM 60 MOBILE MELTER

The Ram 60 Mobile Rubberized Asphalt Melter gives contractors yet another option in accessing hard to reach application points on job sites. This oil-jacketed melter features a hot-air burner chamber that heats an oil chamber which in turn melts the rubberized asphalt material. The oil chamber provides uniform soft heat capability which melts materials in as little as 45 minutes from a cold start. A powered agitator keeps materials suspended and distributes heat inside the material chamber. Diesel fired burner, 100% temperature controls, 8.5 Kohler engine, draincock. 87” L x 33” W x 72” H. Weight 1589-lbs.

WATERPROOFING WATERPROOFING

WA

TER

PRO

OFIN

G &

CO

LD PR

OC

ESS EQU

IPMEN

T

CYCLONE EXTRUDER

Low pressure adhesive pump specifically designed to dispense a two component 1:1 ratio low viscosity adhesive. Lightweight, easy to maneuver. Ideal for large, congested rooftops. Includes one gun and 35 feet of hose. Optional Honda Generator mounting kit pictured.

COMMANDER 2120 SPRAYER

Easy-to-use sprayer will handle lightweight primers to heavy mastics. Rated at 4500 psi and up to 5 gpm output. Standard 200’ x ¾” material hose. Three gun options: Standard, Flo Gun, Mastic Pole Spray Gun. Powered by 18-hp Kohler engine.

ROLLER BOSS

Two power rollers spread material evenly and efficiently through 30’ hoses. Works with adhesives, primers, elastomerics and non-fibrated aluminum and asphalt coatings. 4 hp Honda, 25 gallon material tank, built-in air compressor and choice of 3”, 4”, 6”, 9”, 12” or 18” roller heads.

HOT MAXX HEATER

A perfect companion to the Commander. Preheats product prior to spraying. Portable high output 125,000 btu, cold process diesel forced air material heater. Cuts heat-up time by 45% to reach heating oil temperature of 250° and cold process material temperature of 90° in about 10 minutes. Easy-to-read, digital control panel

www.garlockequip.com

TM

E Q U I P M E N T C O M P A N Y

COLD PROCESS EQUIPMENT

TRASH TRAY

For off-loading debris 14 ½-cu.-ft., 800-lb. capacity.

ATLAS 2000 LB. HYDRAULIC HOIST

Self-contained with 18 hp Honda engine. Swings left or right with 160 fpm hoisting speed and 225-feet of 5/16” cable standard. TRASH CHUTES / HOPPER

Lightweight polyethylene weighs 28 pounds. 30” diameter x 4’ long chutes can be stored flat or quickly assembled by attaching four bolts.

Chute hopper directs debris into trash chutes for faster clean-up. Integrated stake pockets for adding sides.

Components can be hoisted or hand carried for quick pin assembly and attachment. Supports up to 20 Trash Chutes. Order with Winch Support that fits inside the Chute Support to hoist the Hopper and Chute sections to the roof edge. Slide out support system secures hopper and chute sections. 750 lb. capacity. 43-inch tall guardrails with counter weights.

TRASH CHUTE SUPPORT SYSTEM AND WINCH SYSTEM

GROUND TO ROOF

300 LB. HAND POWER HOIST

Adjustable boom reach and overall weight of 76 lbs. Optional counter balance pans and hoisting wheel. Capacity 300 lbs.

400 LB. HAND SWING ARM HOIST

Left-or-right-swinging boom locks in center position. Outrigger stabilization. Optional

counterweight system with tray and five cans. Capacity 400 lbs.

GR

OU

ND

TO

RO

OF &

ON

-DEC

K EQ

UIPM

ENT

www.garlockequip.com

TM

E Q U I P M E N T C O M P A N Y

ON-DECK EQUIPMENT

30 CU FT DUMP TRAY

Hauls tear-off and debris with 800 lb. capacity. Clamps to frame of Little Giant trailers and dumps easily with one handle.

E-Z ROLL CARRIER

Handles rolls to 134” long with optional 4’ extension. Rotating spindles for easy unrolling. Swivel dollies for maneuvering with rests to hold rolls off the ground. Optional Featherlite flat free tires.

SMART CART

2-wheeled 700-lb. capacity two-wheeled carrier for materials, tools, and equipment. Optional plastic lined debris tray (shown) for debris.

POWER JACK

2500-lb. lifting capacity with only 110-lbs/per sq. ft. weight on surface. 21” lifting height. Hand pump raises forks. Built-in parking brake. Towable with R800 Workhorse.

WHEELBARROW

Two wheel design with 5.75 cu.ft. capacity. Heavy-duty tubular steel frame with built-in bumper tube and 4.00 x 8 tires.

LITTLE/BIG GIANT TRAILER

Carries bundles of insulation, hot tanks or debris on 30”x 60” 2,000 lb. capacity bed. Drop-handle braking. 18”x 8.5” 4-ply tires. Can be towed in tandem. Also available with 30” x 84” bed and 2,000 lb. capacity (Big Giant.)

©2015 Garlock Equipment Company All rights reserved. Printed in U.S.A.

ON-DECK EQUIPMENT

PALLET PACKER WITH PACKER PAL

Dual wheel dolly boosts capacity to 800 lbs. and eases transport with 35” forks, 32.5” on center. Packer Pal option pictured. Safety Guidelines

We care about your safetyIn the interest of safety,

we feel it is important that all Garlock products in use, no matter how old, have up-to-

date instructions and decals. If any of your Garlock products

are in need of decals or instruction, please write or fax us at (800) 820-3268 and we will send them free of charge.

INSULATION FORK

Transport palletized loads on 32” forks, 21” on center. 600 lb. capacity with four 4.10x3.5x6 tires.

2601 Niagara Lane NorthPlymouth, MN 55447

(800) 328-5914P: (763) 553-1935F: (800) 820-3268

www.garlockequip.com

Distributed By:

FULL PRODUCT LINE

E Q U I P M E N T C O M P A N Y

TM

AIR CONDITIONER JACKS

Slides under a/c unit and raise 18-inches. 6 ft. reach standard. Up to 10 ft. with extensions. 4 ¾” x 8 ¼” base protects roof. Four jacks with two extension bars standard.