Embed Size (px)
Citation preview
Equipment for Engineering Education & ResearchSOLTEQ®
FLOW CHANNEL AND FLUME APPARATUS
MODEL: FM 27
THIS Flow Channel and Flume Apparatus (Model: FM 27) has been designed for students to study the
principles of fluid mechanics pertaining to engineering structures in open channel flow. The unit comes
with an open channel made of transparent working section mounted on a strong framework. The unit issupplied with a 2.5 m long flume which can be tilted using a calibrated screwjack. The unit can also be supplied
with an optional 5.0 m and 10.0 m long flume.
EXPERIMENTAL CAPABILITIES
w Measurements of water level by hook and point
gauges
w Measurement of flow rate using a Pitot-static tube
w Force-momentum and steady flow energy
equations.
w Relationship between water level above the crest
of a weir and flow rate over the weir
The unit is fitted with pressure tappings and fixing
points as well as longitudinal scale. The scale is
positioned at the top of the channel so that the depth
gauges and pitot-static tubes can be positioned along
the channel length. The unit is supplied with a
hydraulics bench for the water supply incorporating a
smooth and uniform flow mechanism. The water flow
rates can be measured either by using the volumetric
tank or by flow meter.
SOLTEQ
Equipment for Engineering Education & ResearchSOLTEQ®
w Flow and level control using hydraulic structures
w Sub-and super-critical flow and the underlying
characteristics of waves.
w Measurements of velocity profiles.
SPECIFICATIONS
Flow Channel:
Material: clear acrylic
Size: 2,500 mm (L), 250 mm (H), 75 mm (W)
- Model: FM27A
Size: 5,000 mm (L), 250 mm (H), 75 mm (W)
- Model: FM27B
Size:10,000 mm (L), 250 mm (H), 75 mm (W)
- Model : FM27C
(Please specify model when ordering)
Hydraulics Bench:
Made from glass reinforced plastic (GRP)
Sump tank capacity: 250 litres
Volumetric tank capacity: 40 litres
Circulation pump
Flow meter: range 0.5 to 2.0 L/sec.
Vernier Level Gauges:
1 x 150mm resolution 0.1m
2 x 300mm resolution 0.1m
Basic model is supplied with the followings:-
a) Venturi flume
b) Sharp and broad crested weirs
c) 3 vernier level gauges
Sharp Crested Weir
d) Crump weir
e) Adjustable undershot weir
OPTIONAL ITEMS
a) Pitot tube and manometer board
b) Culvert fitting, one edge square, one rounded
c) Flow splitters, central wall with various nose pieces
d) Free overflow spill nay section complete with ski
jump, sloping apron and bleaded reverse curvature
attachments
e) Syphon spill way and air regulated syphon
f) Model radial gate
g) Wave generator and wave absorbing beach
h) Artificially toughened bed 2.5 m (2 and 4 pieces
required for 5.0 m and 10.0 m channel respectively)
i) False floor sections for gradually varied profiles
REQUIREMENT
Electricity: 240VAC/1-phase.50Hz.
Water: Laboratory mains supply
OVERALL DIMENSION
Length: 3.50 m
Width: 1.00 m
Height: 1.50 m
MANUAL
Operating and Experiment Manual for students in
English.
Broad Crested Weir
SOLTEQ
Equipment for Engineering Education & ResearchSOLTEQ®
Crump Weir
Adjustable Undershot Weir
Venturi Flume
Hydraulic Jump
Radial Gate
060422-SESB
Equipment for Engineering Education & ResearchSOLTEQ®
Our range of teaching equipment can be complemented with our
SOLDAS and SOLCAL software.
SOFTWARE & e - LEARNING
SOLDAS® - Supervisory Control & Data Acquisition
- Data Logging
- Signal Analysis
- Process Control
- Real-Time Display
- Tabulated Results
- Graph of Experimental Results
SOLCAL® - Computer Aided Learning
- Multimedia Features
- Interactive
- Graphic Simulation
- Experiment Result Samples
- Full Experiment Manuals
Contact us for a catalog CD
SOLUTION ENGINEERING SDN. BHD.(Co. No. 174876-M)
Sales Office :
No.3, Jalan TPK 2/4, Taman Perindustrian Kinrara,47100 Puchong, Selangor Darul Ehsan, Malaysia.Tel. No. : +(603) 80758000Fax. No. : +(603) 80755784
R&D Office :
G-2A, Incubator 3, Technology Park Malaysia,Bukit Jalil, 57000 Kuala Lumpur, Malaysia.Tel. No. : +(603) 8996 0023
Email : [email protected] site : http//www.solution.com.my/
AGENT:
BUATAN MALAYSIA
