Equipment May 2020 20P P1 D - horseley.com.au · G1 G2 G4 P1 E1 G4 G5 G6 P1 P3 P4 P4D E1. ORDER HOT LINE - TEL: 1300-130-718 FAX: 1300-130-719 3 Scaler Handpieces and Accessories

C01-M / C02-M LED CURING LIGHTS MINI ( with USB Charger )

C01-M Curing Light ( F.O. Light Guide ) with USB Charger .... $247.50C02-M Curing Light ( Direct Light Head ) with USB Charger .. $275.00C01-M F.O. Light Guide 8 mm ...................................................... $59.95C02-M Direct Light Head 11 mm .................................................. $88.55C01-M/C02-M Replacement Battery .......................................... $49.50228 Light Sleeves Mini 500 pcs/box ............................................ $49.50USB Charger .................................................................................... $9.90

May 2020

REMARKS:

C01-M(F.O. Light Guide)

Curing TimeDepth

MeasurementsDepth

MeasurementsC02-M

(Direct Light Source)Curing Time

C01-M / C02-M CURING LIGHT DEPTH OF CURE

MODELMODE

4.3 mm

4.6 mm

FULL

SOFT 15 seconds

10 seconds

15 seconds

10 seconds2.15 mm

2.30 mm

5.1 mm

4.8 mm

2.55 mm

2.40 mm

ISO 4049 DepthMeasurements

(-50%)

ISO 4049 DepthMeasurements

(-50%)

C01-

M

C02-

M

C01-M

C02-M

Pink

Oran

ge

Yello

w

L.Gr

een

Lim

e

L.Bl

ue

Blue

L.La

vend

er

Whi

te

Blac

k

C01-M (F.O. Light Guide) C02-M (Direct Light Source)

C01-M / C02-M SPECIFICATIONS

Model

1,200 mW/cm² for 5, 10, 15, 20, 25, 30 seconds±10%

LIGHT WAVELENGTH 440~480 nm

86 gms

230 mm

84 gms

220 mm

440~480 nm

LIGHT TIP 11 mm ( dia. )8 mm ( dia. )

1st five seconds from 0�900 mW/cm² next 5, 10, 15, 20, 25 seconds 900 mW/cm²±10%MOD

E FULL

SOFT

WEIGHT

LENGTH

10coloursavailable

Above data is based on test results using an A2 shade composite. The light tip was placed above and pointed perpendicular to the composite. Tests were done as per ISO 4049 Standard. The samples were measured and the data was divided by two ( 50% of the total composite depth cured ). ISO 4049 Standard requires that the results for class II restorative materials should be at least 1.5 mm for non-opaque shades and 1.0 mm for opaque shades. All resins and composites have different curing times. It is recommended that you should test your resins and composites performance to determine the curing times required.

11 mm8 mm

F.O.

LIG

HT G

UIDE

DIRE

CT L

IGHT

SOU

RCE

STAI

NLES

S ST

EEL

HEAD

C01-

M

C02-

M

HARDENEDGLASS LENSCOLLIMATED

UNIFORMSTRAIGHT

LIGHT BEAM

• 360� Rotatable tips• Automatic compensation circuit for constant power output• Fully covered membrane panel for easy cleaning and infection control• Light weight: approx. 85 gms• Dual modes: FULL / SOFT• 12 Operation times• Fully charged battery provides over 100 x 10 second curing cycles

063 Light ProtectiveHand Shield

$38.50

24 MONTH WARRANTY

C01-M/C02-MFor every Curing Light purchased

get one 063 Hand Shield

12 mm

ORDER HOT LINE - TEL: 1300-130-718 FAX: 1300-130-7192

LED Scalers

N3000L ( EMS Type ) Built-In LED Scaler Set ........... $275.00V3000L ( SATELEC Type ) Built-In LED Scaler Set ... $275.00

MaxPiezo 6+ ( EMS Type ) LED Scaler Set ................. $396.00MaxPiezo DS6+ ( SATELEC Type ) LED Scaler Set .... $396.00

MaxPiezo 7+ ( EMS Type ) Portable LED Scaler Set .................. $880.00MaxPiezo DS7+ ( SATELEC Type ) Portable LED Scaler Set ..... $880.00

REFINE N3000L / V3000L BUILT-IN LED SCALERS• Automatic frequency tracking, real-time feedback• Detachable handpiece• Frequency: 28 KHz ± 3 KHz• Complete with 6 tips

REFINE MaxPiezo 6+ / DS6+ LED SCALERS

REFINE MaxPiezo 7+ / DS7+ PORTABLE LED SCALERS

• Automatic frequency tracking, real-time feedback• Power and water controlled by touch panel, easy to clean for infection control• Detachable handpiece• Frequency: 28 kHz ± 3 kHz• Complete with 6 tips• Size: W155mm x D168mm x H80mm• Weight: 0.6 kg (unit only)• Colour: White

• Automatic frequency tracking, real-time feedback• Extra large, capacity 600 ml water tank for water, chlorhexidine, hydrogen peroxide, sodium hypochlorite etc...• Power and water controlled by touch panel, easy to clean for infection control• Detachable handpiece• Frequency: 28 kHz ± 3 kHz• Complete with 8 tips• Size: W180mm x D180mm x H150mm• Weight: 1.6 kg (unit only)• Colour: White

1. EMS is a registered trademark of Electro Medical System S.A. Switzerland 2. SATELEC is a registered trademark of Satelec/Acteon Group France



G1 G1 G2 G4 P1 E1

G1 G1 G2 G4 P1 E1

G4 G5 G6 P1 P3 P4 P4D E1

ORDER HOT LINE - TEL: 1300-130-718 FAX: 1300-130-719 3

Scaler Handpieces and Accessories

NO. 1 NO. 2

REFINE SCALER TIP HOLDERS

REFINE SCALERTORQUE WRENCHES

REFINEPOWER SUPPLY

REFINESOLENOID VALVE

REFINEFOOT SWITCH

each$27.50

each$19.80

each$19.80

each$19.80

each$59.95

each$38.50

each$33.55

Buy 1 get 1 (same item)



E04 Ultrasonic FilesSingle Size6 pcs/pack

$6.60

E04 ULTRASONIC FILES

• For use with ultrasonic scaler• Excellent tenacity• Length: 33 mm

E04 ULTRASONIC FILES NiTi alloy

#30

#35

#40

#15

#20

#25

Buy 5 get1

3H Non-LED ( EMS¹ Type )Handpiece Hose ... $59.95

7H Non-LED ( SATELEC² Type )Handpiece Hose ... $59.95

7L LED ( SATELEC² Type )Handpiece Hose ... $68.75

5L LED ( EMS¹ Type )Handpiece Hose ... $68.75

HP-3H Non-LED Scaler Handpiece ( EMS¹ Type ) .... $198.00

HP-5L LED Scaler Handpiece ( EMS¹ Type ) ............. $220.00

HS-7H Non-LED Scaler Handpiece ( SATELEC² Type ) .... $220.00

HS-7L LED Scaler Handpiece ( SATELEC² Type ) ............. $247.50

Multi function wrench for both endo chuck & bur

each$38.50

REFINE ENDO WRENCH

REFINESCALERHANDPIECEHOSES

each$14.85

TW-A

1. EMS is a registered trademark of Electro Medical System S.A. Switzerland2. SATELEC is a registered trademark of Satelec/Acteon Group France


Buy 1 get1 (same item)

HP-3H

HP-5L

HS-7H

HS-7L

TW-1L

For EMS¹, KAVO PiezoLED5 SATELEC², NSK³ type scalers

TS-1L

For SIRONA4 type scalers

TK-1L

For KAVO5 SONICflex5

SONOsoft5

type scalers

1. EMS is a registered trademark of Electro Medical System S.A. Switzerland2. SATELEC is a registered trademark of Satelec/Acteon Group France3. NSK is a registered trademark of Nakanishi Inc. Japan4. SIRONA is a registered trademark of Siroa Dental System5. KAVO, SONICflex, SONOsoft, PiezoLED are registered trademarks of Kavo Dental GmbH Germany

REFINE PIEZO SCALER HANDPIECES

1. EMS is a registered trademark of Electro Medical System S.A. Switzerland2. SATELEC is a registered trademark of Satelec/Acteon Group France3. NSK is a registered trademark of Nakanishi Inc. Japan4. SIRONA is a registered trademark of Siroa Dental System

29.1 mm0.4

28.2 mm0.4

32.5 mm0.4

29.4 mm0.4

31.0 mm0.4

31.5 mm0.4

33.0 mm

18.5

33.6 mm

12

32.2 mm

6

22.8 mm

120°

19.4 mm

95°

30.2 mm

16

30.7 mm

10

38.00 mm

22

39.7 mm

15

38.0 mm

22

30.2 mm

16

G1 ( EMS1 Type )GD1 ( SATELEC2, NSK3 Type )GS1 ( SIRONA4 Type )






Supragingival deposits in all quadrants

Heavy supragingival deposits on anterior teeth Supragingival deposits

in all quadrants

Voluminous supragingival deposits

Supragingival deposits in all quadrants, including the interproximal and sulcus areas

Supragingival and interproximal deposits

SCALING

Comparable withEMS1 Type B

Comparable withEMS1 Type P

Comparable withEMS1 Type A

Comparable withEMS1 Type C

NSK3 G2Satelec2 2

Comparable withNSK3 G1

Satelec2 1

each $27.50

each $27.50

each $33.55

each $33.55

each $33.55

each $33.55

Buy 1 get 1 (same number)


Scaler Tips

FOR EMS1 , SATELEC2, NSK3 and SIRONA4 REFINE Type Scalers

REFINE SCALER TIPS STAINLESS STEEL

E1 ( EMS1 Type )ED1 ( SATELEC2, NSK3 Type )ES1 ( SIRONA4 Type )

ENDO



E3D ( EMS1 Type )ED3D ( SATELEC2, NSK3 Type )ES3D ( SIRONA4 Type )

P4D ( EMS1 Type )PD4D ( SATELEC2, NSK3 Type )PS4D ( SIRONA4 Type )





120°file holder for anteriorroot canal irrigation

95°file holder for molar teeth root canal irrigation

Gutta-percha melting

Diamond coated instrument for root canal enlarging

Diamond coated instrument for root canal enlarging

Removing root filling obstructions during root canal retreatment

Removing calcification and filling material during root canal retreatment

Removing root filling obstructions during root canal retreatment

Removing calcification and filling material during canal retreatment

each $38.50

each $38.50

each $38.50

each $59.95

each $59.95

each $59.95

each $68.75

each $59.95

each $68.75

Comparable withSatelec2 PM4

Comparable withNSK3 E7D

Satelec2 ET18D

Comparable withEMS1 Type H

NSK3 E6Satelec2 S07



Removing root filling obstructionsduring root canal retreatments

Removing root filling obstructionsduring root canal retreatments

each $49.50

each $49.50

28.8 mm0.4

31.9 mm

32.5 mm

31.9 mm

37.8 mm

38.7mm

38.1 mm

37.4 mm

36.4 mm

30.4 mm0.4

33.7 mm

29.7 mm

29.7 mm

33.7 mm

28.8 mm

32.3 mm

31.4 mm

1. EMS is a registered trademark of Electro Medical System S.A. Switzerland2. SATELEC is a registered trademark of Satelec/Acteon Group France3. NSK is a registered trademark of Nakanishi Inc. Japan4. SIRONA is a registered trademark of Siroa Dental System5. KAVO, SONICflex, SONOsoft, PiezoLED are registered trademarks of Kavo Dental GmbH Germany6. AMDENT is a registered trademark of Amdent AB Sweeden

FOR AMDENT6 Type Scalers

A1 ( AMDENT6 Type )Supragingival scaling( #37 )

A2 ( AMDENT6 Type )Supragingival scaling( #39 )each $59.95 each $59.95

Buy 1 get1

(same number)

GK1 ( KAVO5 Type )

GK2 ( KAVO5 Type )

GK3 ( KAVO5 Type )

GK4 ( KAVO5 Type )

GK6 ( KAVO5 Type )

GK5 ( KAVO5 Type )Subgingival calculus

Supragingival deposits,including the interproximal and sulcus areas

Supragingival interdental calculus and calculus at the neck of the tooth

Supragingival heavy calculus and plaque


Left angle instrument for revmoving subgingival calculus

GK7 ( KAVO5 Type )Right angle instrument forrevmoving subgingival calculus

each $59.95

each $59.95

each $59.95

each $59.95

each $59.95

35.8 mm

0.4 each $59.95

FOR KAVO SONICflex5 Type Scalers FOR KAVO SONOsoft5 Type Scalers

KAVO PiezoLED5 Type Scalers

GC1 ( KAVO5 Type )

GC2 ( KAVO5 Type )

PC1 ( KAVO5 Type )Subgingival calculus, including the interproximal and sulcus areas

201 ( KAVO5 Type )Supragingival and interproximal deposits

202 ( KAVO5 Type )Supragingival deposits in all quadrants, including the interproximal and sulcus areas

203 ( KAVO5 Type )Deep pocket subgingival deposits

Supragingival interdental calculus and calculus at the neck of the tooth


each $59.95

each $59.95

each $59.95

each $68.75

each $68.75

each $68.75

31.4 mm0.4

30.8 mm0.7

each $59.95

P1 ( EMS1 Type )PD1 ( SATELEC2, NSK3 Type )PS1 ( SIRONA4 Type )

P2L ( EMS1 Type )PD2L ( SATELEC2, NSK3 Type )


P2R ( EMS1 Type )PD2R ( SATELEC2, NSK3 Type )


P2LD ( EMS1 Type )PD2LD ( SATELEC2, NSK3 Type )

P3D ( EMS1 Type )PD3D ( SATELEC2, NSK3 Type )PS3D ( SIRONA4 Type )

P2RD ( EMS1 Type )PD2RD ( SATELEC2, NSK3 Type )

Shallow pocket subgingival deposits

Deep pocket subgingival deposits

Left angle instrument to remove calculus from very narrow inter-root space and furcation

Right angle instrument to remove calculus from very narrow inter-root space and furcation

Removal of calculus from narrow inter-root spaces (diamond-coated)

Diamond coated instrument for root planning

Shallow pocket subgingival deposits

Diamond coated instrument for root planning afterperiodontal flap surgery

Comparable withEMS1 Type PS

Comparable withEMS1 Type DPL3


Satelec2 #10P

each $38.50

each $38.50

each $49.50

each $49.50each $49.50

each $27.50

each $38.50

each $38.50


Scaler Tips

FOR EMS1 , SATELEC2, NSK3 and SIRONA4 Type Scalers

REFINE SCALER TIPS STAINLESS STEEL

PERIO

35.8mm

0.4

C01 LED CURING LIGHTS with fibre optic light guides

C01-C (classic) C01-S (super power) C01-D (dual range)

C01 SPECIFICATIONS

Model

900 mW/cm² for 1 second±10%

2,000 mW/cm² for 4 seconds±10%1,500 mW/cm² for 5 seconds ±10%

N/A

N/A 2,000 mW/cm² for 3 + 3 seconds±10% (with 1 second blink in between)

1,200 mW/cm² for 5, 10, 15, 20 seconds±10%

APPLICATION General Ortho / General General / Ortho

LIGHT WAVELENGTH 440~480 nm 440~480 nm 390~430 nm440~480 nm

F.O. LIGHT GUIDE 11 mm ( dia. )8 mm ( dia. )


1st five seconds from 0�1,200 mW/cm² next 5, 10, 15, 20 seconds 1,200 mW/cm²±10%

1st five seconds from 0�900 mW/cm² next 5, 10, 15, 20, 25 seconds 900 mW/cm²±10%

TACK

MOD

E

TURBO

3’ + 3’

6’ + 6’

FULL

RAMP

SOFT CURE

WEIGHT

LENGTH

205 gms 200 gms 200 gms

260 mm 265 mm 265 mm

AUTOMATICCOMPENSATION

CIRCUIT FORCONSTANT

POWER OUTPUT

SIZE:L265 x Dia.27 (mm)

AUTOCLAVABLEFIBRE OPTICLIGHT GUIDE

CAN BEROTATED 360º

ON/OFFSWITCH

DISPLAYSCREEN

TIMESWITCH

MODESWITCH

A FULL CHARGEOF BATTERYCAN BE USEDMORE THAN

100 TIMES WHENSET AT 10 SECOND

TIME MODE

MODEINDICATORS

REPLACEABLEBATTERYOPENING

FULLY COVEREDMEMBRANE PANEL

FOR EASY CLEANINGAND INFECTION

CONTROL063

063Protective Hand

Light Shield $38.50


C01 Curing Lights

C01-C Curing Light ( Classic ) with 8 mm Light Guide ................. $385.00C01-S Curing Light ( Super Power ) with 11 mm Light Guide ...... $495.00C01-D Curing Light ( Dual Range ) with 11 mm Light Guide ........ $495.00C01-C-1 8 mm Fibre Optic Light Guide ............................................ $59.95C01-S/D-1 11 mm Fibre Optic Light Guide .................................... $148.50C01/2-1 Replacement Battery .......................................................... $59.95123S Light Sleeves Small ( for C01-C ) 500 pcs/box ....................... $49.50123L Light Sleeves Large ( for C01-S/C01-D ) 500 pcs/box .......... $55.55

24 MONTH WARRANTY

C01 Complete Setwith Built-In

Light IntensityIndicator

CHARGINGSTATION

LIGHT INTENSITYINDICATOR

For every C01 Curing Light purchased (any model)


CURING LIGHT MODE APPLICATIONS

A very short initial cure for temporary processing before the final cure. For example when removing excess materials whilst bonding veneers or using temporary cement. Tack rings are included inside the box.

Super fast curing for resin and composite that is no more than 2 mm thick.Also recommended for ceramic brackets, bonding veneers etc.

3 Second Mesial + 3 Second Distal for metal brackets resin bonding (with 1 second blink in-between)

6 Second Mesial + 6 Second Distal for metal brackets with bonding resin requiringmore curing time and for buccal tube bonding (with 1 second blink in-between)

For general applications

First 0-5 seconds are ramped for general application.

First 0-5 seconds are ramped for more gentle processing, designed for patients sensitive to heat.

TACK

TURBO

3’ + 3’

6’ + 6’

FULL

RAMP

SOFT CURE

12 colours available:

Pink Orange Yellow L.Green Green Lime L. Blue Blue Lavender L.Lavender White Black

REMARKS:

Data is only for reference, always follow the instructions from your resin and composite manufacturers.

C01-C Light Wavelength C01-S Light Wavelength C01-D Light Wavelength

420 440 460 480 500 520 (nm)

LIG

HT

INT

EN

SIT

Y (m

W/c

m²)

EFFECTIVEWAVELENGTH

BAND440 nm - 480 nm

SOFT CURE900 mW/cm²

FULL1200 mW/cm²

TURBO1500 mW/cm²

800

1000

1200

1400

1600

1800

2000

420 440 460 480 500 520 (nm)LI

GH

T IN

TE

NS

ITY

(mW

/cm

²)

EFFECTIVEWAVELENGTH

BAND440 nm - 480 nm


FULL1200 mW/cm²

TURBO2000 mW/cm²

800

1000

1200

1400

1600

1800

2000

380 400 420 440 460 480 500 520 (nm)

LIG

HT

INT

EN

SIT

Y (m

W/c

m²)

EFFECTIVELOWER

WAVELENGTHBAND

390 nm - 430 nm

EFFECTIVEUPPER

WAVELENGTHBAND

440 nm - 480 nm


FULL1200 mW/cm²

TURBO2000 mW/cm²

800

1000

1200

1400

1600

1800

2000

C01-C (classic)Curing Time

DepthMeasurements

DepthMeasurements

DepthMeasurements

C01-S (super power)Curing Time

C01-D (dual range)Curing Time

C01-C / C01-S / C01-D CURING LIGHT DEPTH OF CURE

MODEL

5 seconds 4.2 mm

4.3 mm

4.1 mm

4.6 mm

10 seconds

FULL

RAMP

SOFT CURE

TURBO

15 seconds

10 seconds

4 seconds

10 seconds

15 seconds

10 seconds

4 seconds

10 seconds

15 seconds

10 seconds

2.10 mm

2.15 mm

2.05 mm

2.30 mm

4.6 mm

5.1 mm

5.0 mm

4.8 mm

2.30 mm

2.55 mm

2.50 mm

2.40 mm

4.3 mm

4.4 mm

4.2 mm

4.6 mm

2.15 mm

2.20 mm

2.10 mm

ISO 4049 DepthMeasurements (-50%)



2.30 mm


C01 Curing Lights

7

Above data is based on test results using an A2 shade composite. The light guide tip was placed above and pointed perpendicular to the composite. Tests were done as per ISO 4049 Standard. The samples were measured and the data was divided by two (50% of the total composite depth cured). ISO 4049 Standard requires that the results for class II restorative materials should be at least 1.5 mm for non-opaque shades and 1.0 mm for opaque shades. All resins and composites have different curing times. It is strongly recommended that you should test your composite and resin performance to determine the curing times required.

• There are many variables (distance and angle between the light tip and composite, area, shade, thickness and type etc.) affecting composite curing times. It is recommended to place and cure a maximum of 2 mm for each composite placement.• Using a barrier sleeve on the curing light will reduce 5-10% of light intensity.• The light guide tip should be placed approximately 1-2 mm above the composite or resin and pointed perpendicular to the tooth surface.• High intensity curing lights produce more heat. This is a direct indication of the power of the light being emitted. When using the device for more than 10 seconds, do not keep the light tip in one position. It is always recommended to use a dental syringe to blow a cold air flow on the area during long periods of curing. This will maintain a lower temperature for the composite and surrounding area, particularly when using rubber dam so as to avoid any rubber dam breakage due to heat built-up.• Do not expose soft tissue to the light being emitted for more than 2 seconds or burns may occur. • Avoid the light guide tip coming into contact with any soft tissue in the mouth.


C02 Curing Lights

AUTOMATICCOMPENSATION

CIRCUIT FORCONSTANT

POWER OUTPUT

SIZE:L255 x Dia.27 (mm)

LIGHT GUIDECAN BE

ROTATED 360º

LOW PROFILE HEADFOR ACCESSING

HARD-TO-REACH AREAS12 mm

HARDENEDGLASS LENSCOLLIMATED

UNIFORMSTRAIGHT

LIGHT BEAM

STAINLESSSTEELHEADFOR

DURABILITY

ON/OFFSWITCH

DISPLAYSCREEN

TIMESWITCH

MODESWITCH

FULLY COVEREDMEMBRANE PANEL

FOR EASY CLEANINGAND INFECTION

CONTROL

MODEINDICATORS

REPLACEABLEBATTERYOPENING

C02 LED CURING LIGHTS 90° right angle direct light source head

C02-C (classic) C02-S (super power) C02-D (dual range)

TACK

C02 SPECIFICATIONS

Model

MOD

E

TURBO

3’ + 3’

6’ + 6’

FULL

RAMP

SOFT CURE

900 mW/cm² for 1 second±10%

2,500 mW/cm² for 3 seconds±10%1,500 mW/cm² for 5 seconds ±10%

N/A


1,200 mW/cm² for 5, 10, 15, 20 seconds±10%

APPLICATION General Ortho / General General / Ortho

LIGHT WAVELENGTH 440~480 nm 440~480 nm 390~430 nm440~480 nm

DIRECT LIGHT HEAD 10 mm ( dia. )


1st five seconds from 0�1,200 mW/cm² next 5, 10, 15, 20 seconds 1,200 mW/cm²±10%

1st five seconds from 0�900 mW/cm² next 5, 10, 15, 20, 25 seconds 900 mW/cm²±10%

WEIGHT

LENGTH

CHARGINGSTATION LIGHT INTENSITY

INDICATOR

C02-C ( Classic ) Curing Light with 10 mm Light Head .............. $385.00C02-S ( Super Power ) Curing Light with 10 mm Light Head .... $495.00C02-D ( Dual Range ) Curing Light with 10 mm Light Head ...... $495.00C02-C-1 ( Classic ) Direct Light Source Head ............................... $99.55C02-S-1 ( Super Power ) Direct Light Source Head .................... $148.50C02-D-1 ( Dual Range ) Direct Light Source Head ..................... $148.50C01/2-1 Replacement Battery ....................................................... $59.95125 Light Sleeves ( for C02-C/S/D ) 500 pcs/box ......................... $49.50

C02 Complete Setwith Built-In

Light IntensityIndicator

24 MONTH WARRANTY

063

063Protective Hand

Light Shield $38.50

185 gms 185 gms 185 gms

255 mm 255 mm 255 mm

A FULL CHARGEOF BATTERYCAN BE USEDMORE THAN

100 TIMES WHENSET AT 10 SECOND

TIME MODE

For every C02 Curing Light purchased (any model)


CURING LIGHT MODE APPLICATIONS

A very short initial cure for temporary processing before the final cure. For example when removing excess materials whilst bonding veneers or using temporary cement. Tack rings are included inside the box.

Super fast curing for resin and composite that is no more than 2 mm thick.Also recommended for ceramic brackets, bonding veneers etc.

3 Second Mesial + 3 Second Distal for metal brackets resin bonding (with 1 second blink in-between)

6 Second Mesial + 6 Second Distal for metal brackets with bonding resin requiringmore curing time and for buccal tube bonding (with 1 second blink in-between)

For general applications

First 0-5 seconds are ramped for general application.

First 0-5 seconds are ramped for more gentle processing, designed for patients sensitive to heat.

TACK

TURBO

3’ + 3’

6’ + 6’

FULL

RAMP

SOFT CURE

12coloursavailable:

Pink Orange Yellow L.Green Green Lime L. Blue Blue Lavender L.Lavender White Black

C02-C Light Wavelength C02-S Light Wavelength C02-D Light Wavelength

REMARKS:

Data is only for reference, always follow the instructions from your resin and composite manufacturers.

420 440 460 480 500 520 (nm)

LIG

HT

INT

EN

SIT

Y (m

W/c

m²)

EFFECTIVEWAVELENGTH

BAND440 nm - 480 nm


FULL1200 mW/cm²

TURBO1500 mW/cm²

800

1000

1200

1400

1600

1800

2000

2200

2400

2600

420 440 460 480 500 520 (nm)

LIG

HT

INT

EN

SIT

Y (m

W/c

m²)

EFFECTIVEWAVELENGTH

BAND440 nm - 480 nm


FULL1200 mW/cm²

TURBO2500 mW/cm²

800

1000

1200

1400

1600

1800

2000

2200

2400

2600

380 400 420 440 460 480 500 520 (nm)

LIG

HT

INT

EN

SIT

Y (m

W/c

m²)

EFFECTIVE LOWERWAVELENGTH

BAND390 nm - 430 nm

EFFECTIVE UPPERWAVELENGTH

BAND440 nm - 480 nm


FULL1200 mW/cm²

TURBO2500 mW/cm²

800

1000

1200

1400

1600

1800

2000

2200

2400

2600

4.4 mm

5.1 mm

4.8 mm

5.0 mm

2.20 mm

2.55 mm

2.40 mm

2.50 mm

4.6 mm

5.3 mm

5.3 mm

5.4 mm

2.30 mm

2.65 mm

2.65 mm

2.70 mm

4.5 mm

5.2 mm

4.9 mm

5.1 mm

2.25 mm

2.60 mm

2.45 mm

2.55 mm

C02-C (classic)Curing Time

DepthMeasurements

DepthMeasurements

DepthMeasurements

C02-S (super power)Curing Time

C02-D (dual range)Curing Time

C02-C / C02-S / C02-D CURING LIGHT DEPTH OF CURE

MODEL

5 seconds

10 seconds

FULL

RAMP

SOFT CURE

TURBO

15 seconds

10 seconds

3 seconds

10 seconds

15 seconds

10 seconds

3 seconds

10 seconds

15 seconds

10 seconds





C02 Curing Lights

9

Above data is based on test results using an A2 shade composite. The light tip was placed above and pointed perpendicular to the composite. Tests were done as per ISO 4049 Standard. The samples were measured and the data was divided by two (50% of the total composite depth cured). ISO 4049 Standard requires that the results for class II restorative materials should be at least 1.5 mm for non-opaque shades and 1.0 mm for opaque shades. All resins and composites have different curing times. It is strongly recommended that you should test your composite and resin performance to determine the curing times required.

• There are many variables (distance and angle between the light tip and composite, area, shade, thickness and type etc.) affecting composite curing times. It is recommended to place and cure a maximum of 2 mm for each composite placement.• Using a barrier sleeve on the curing light will reduce 5-10% of light intensity.• The light tip should be placed approximately 1-2 mm above the composite or resin and pointed perpendicular to the tooth surface.• High intensity curing lights produce more heat. This is a direct indication of the power of the light being emitted. When using the device for more than 10 seconds, do not keep the light tip in one position. It is always recommended to use a dental syringe to blow a cold air flow on the area during long periods of curing. This will maintain a lower temperature for the composite and surrounding area, particularly when using rubber dam so as to avoid any rubber dam breakage due to heat built-up.• Do not expose soft tissue to the light being emitted for more than 2 seconds or burns may occur. • Avoid the light tip coming into contact with any soft tissue in the mouth. As an option, you may cover the entire curing light with a disposable sleeve and then place the Heat Protective Ring (included inside the packing box) onto the light tip covered with sleeve as shown below. Ensure the Heat Protective Ring is securely positioned on the curing light before starting the cure.


Curing Light and Turbines




LED HIGH SPEED TURBINE QUICK DISCONNECT

HIGH SPEED TURBINE QUICK DISCONNECT

NON LED QUICK COUPLINGTorque Power: 22 Watts Speed: 350,000 r.p.m. ±10%

T90+QK HIGH TORQUEPUSH BUTTON • Anti-retraction

• Ceramic Bearings• Stainless steel head• Quiet operation noise level, less than 65 dB• Ergonomic design• Autoclavable up to 134ºC• Kavo¹ type fitting

• LED Fibre Optic• Anti-retraction• Ceramic Bearings• Stainless steel head• Quiet operation noise level, less than 65 dB• Ergonomic design• Autoclavable up to 134ºC• Kavo¹ type fitting

NON LED HIGH TORQUE TURBINE QUICK DISCONNECT T90+QK Kavo1 Type ( without Coupling ) ................ $599.50T90+(A) High Torque PB Cartridge ........................... $299.75

NON LED QUICK COUPLINGQK Kavo1 Type ( non LED ) w Spray Adjustment ... $198.00

LED HIGH TORQUE TURBINE QUICK DISCONNECTT90+LK Kavo1 Type ( without Coupling ) ................. $687.50T90+(A) High Torque PB Cartridge ........................... $299.75

LED QUICK COUPLINGLK Kavo1 Type ( LED ) w Spray Adjustment ............ $247.50

LED QUICK COUPLING

with Spray Adjustment

12.5 mm

13.0

mm

Torque Power: 22 Watts Speed: 350,000 r.p.m. ±10%

T90+LK HIGH TORQUEPUSH BUTTON

12.5 mm

13.0

mm T90P HIGH TORQUE

PUSH BUTTON

HIGH SPEED TURBINE STANDARD CONNECTION• Anti-retraction• Ceramic Bearings• Stainless steel head• Ergonomic design• Quiet operation noise level, less than 65 dB• Autoclavable up to 134ºC• Midwest 4 holes

12 MONTH WARRANTY

24 MONTH WARRANTY

24 MONTH WARRANTY

TURBINE STANDARD CONNECTIONT90P High Torque Push Button ( Midwest 4 Holes ) ... $198.00T90P(A) High Torque PB Cartridge ................................. $99.55

Torque Power: 22 Watts Speed: 350,000 r.p.m. ±10%

12.5 mm

13.0

mm

LK KaVo1 Type

with Spray AdjustmentQK KaVo1 Type

1. KAVO is a registered trademark of Kavo Dental GmbH Germany

1. KAVO is a registered trademark of Kavo Dental GmbH Germany

• Direct light source head 90° for easy access to limited space areas• Radiant intensity: 1200~1600 mw/cm²• Range of wavelength: 440~480 nm• A full charge of battery can be used more than 100 times when set at 10 second working time mode• Direct charging option from transformer for easy transportation and mobility• Complete with protective light shield and light sleeves (100 pcs)• Size: length 23.5 cm x dia 2.7 cm• Weight: 160 gm• Colours: Pink, Orange, Yellow, Light Green, Green or Lime

• Automatic compensation circuit for constant power output• Five modes of working time: 5, 10, 15, 20, 25 seconds• Three working outputs: 100%, 75%, 50%

440~480 nm1200~1600 mw/cm²

direct lightsource head

90º

C02 LED Curing Light 90° Right Angle ................ $220.00C02-1 Direct Light Source Head 90° (cold disinfectant only) .................................. $59.95C02-2 Light Head Protective Caps, 5 pcs/pack .... $19.80C02-3 Heat Protective Rings, 5 pcs/pack ............. $19.80123SS Curing Light Sleeves, 500 pcs/box ............ $49.50063 Light Protective Hand Shield .......................... $38.50

063

C02 LED CURING LIGHT (5 WATTS)direct light source head 90º right angle

C10 Light Metereach $59.95

24 MONTH WARRANTYFor every Curing Light purchased get one C10 Light Meter + 063 Hand Shield

MODERN FULL TITANIUM TURBINE CERAMIC BEARINGS 45º for impact surgery

AIR-13 KN Titanium Turbine 45º for Impact Surgery ........... $599.50AIR-13 KN LED Titanium Turbine 45º for Impact Surgery ... $599.50

2C-N01 Coupling ............ $225.502C-N1 LED Coupling ..... $247.50


Tunbines

11

• Barden ceramic bearings, durable lifetime• Quiet operation, noise level less than 60dB• Ergonomic design• Anti-retraction system• 3 port spray• Titanium alloy body• Durable fibre optic glass illuminator 25,000 LUX• Autoclavable to 134ºC

W&

H R

oto Quick

® Type

Sirona R

/F® Typ

e

KaV

o MU

LTIflex LUX

® Type

With S

pray A

djustm

ent

NS

K M

achlite/Phatelus

® Type

LK LEDCoupling

each $247.50

2C-W2 LEDCoupling

each $275.00

2C-S2 LEDCoupling

each $275.00

2C-N1 LEDCoupling

each $247.50

MODERN FULL TITANIUM TURBINES LED FIBER OPTIC CERAMIC BEARINGSTorque Power: 22 Watts Speed: 350,000 r.p.m.HIGH TORQUE (16K)

Torque Power: 19 Watts Speed: 350,000 r.p.m.

STANDARD HEAD (18K)

High Torque (22 watts) Speed 350,000 r.p.m.AIR-16KW LED Ti Titanium Turbine W&H® Type .... $687.50AIR-16KS LED Ti Titanium Turbine Sirona® Type ... $687.50AIR-16KN LED Ti Titanium Turbine NSK® Type ...... $687.50

Standard Head (19 watts) Speed 350,000 r.p.m.AIR-18KK LED Ti Titanium Turbine Kavo® Type ..... $687.50AIR-18KW LED Ti Titanium Turbine W&H® Type .... $687.50AIR-18KS LED Ti Titanium Turbine Sirona® Type ... $687.50AIR-18KN LED Ti Titanium Turbine NSK® Type ...... $687.50

Cartridge16K High Torque ......................................................... $346.5018K Standard Head ..................................................... $346.50

• Barden ceramic bearings, durable lifetime• Quiet operation, noise level less than 60dB• Ergonomic design• Anti-retraction system• 3 port spray• Titanium alloy body• Autoclavable to 134ºC

MODERN FULL TITANIUM TURBINES STANDARD CERAMIC BEARINGS

KaV

o® M

ULTIflex

® Type

2C-KO Non-LEDCoupling

each $225.50

2C-N01 Non-LEDCoupling

each $225.50

Torque Power: 22 Watts Speed: 350,000 r.p.m.HIGH TORQUE (16K)

Torque Power: 19 Watts Speed: 400,000 r.p.m.STANDARD HEAD (18K)

NS

K M

achlite/Phatelus

® Type

High Torque (22 watts) Speed 350,000 r.p.m.AIR-16KK Ti Titanium Turbine Kavo® Type ..... $599.50AIR-16KN Ti Titanium Turbine NSK® Type ..... $599.50Standard Head (19 watts) Speed 400,000 r.p.m.AIR-18KK Ti Titanium Turbine Kavo® Type ..... $599.50AIR-18KN Ti Titanium Turbine NSK® Type ...... $599.50Cartridge16K High Torque ................................................. $346.5018K Standard Head ............................................ $346.50

MODERN LED LIGHT BULBSLife 200 times longer than halogen bulb, brighter light, Simple, Sterilizable, Less self-heating, Less wattage, Durable, Superior light quality ...Natural Daylight quality will let you NEVER want to go back to Halogen again!

KaVo MULTIflex LUX® Type ......... $38.50NSK® LED Type ............................. $49.50Sirona R/F® Type .......................... $59.95W&H Type ...................................... $99.50 1 x LED

= Over 25 X Halogens

12 MONTH WARRANTY

12 MONTH WARRANTY

12 MONTH WARRANTY






Low Speed Handpieces

INTERNAL SPRAY

LOW SPEED HANDPIECES AND AIR MOTOR

PROPHY LOW SPEED HANDPIECES

L20-4PY ( RM )60º Turn ReciprocatingPush Button Mini HeadCA Handpiece4:1 Reduction$165.00

L20-1LLatchCA Handpiece1:1 Standard$88.55

L20-1PPush ButtonCA Handpiece1:1 Standard$126.50

L20-1PMPush Button Mini HeadCA Handpiece1:1 Standard$148.50

L20-4PY ( R )60º Turn ReciprocatingPush Button Standard HeadCA Handpiece4:1 Reduction$148.50

L20-4PPush ButtonCA Handpiece4:1 Reduction$148.50

L20-4PMPush Button Mini HeadCA Handpiece4:1 Reduction$165.00

L10-1StraightHandpiece1:1 Standard$99.55

L10-4PYProphy AngleStraight Handpiece4:1 Reduction$148.50

L30Air Motor ( 4 holes )20,000 r.p.m.$148.50

L20-4PY ( SS )Screw-In / Snap-OnCA Handpiece4:1 Reduction$165.00

L20-1PY ( SS )Screw-In / Snap-OnCA Handpiece1:1 Standard$126.50

12 MONTH WARRANTY Buy 2 get 1 (same item)


Prophy Angle

CLEARANCE SALE OFF MARKED PRICE

[offer subject to stock availability ]

BEING LOW SPEED HANDPIECE HEADS AND SHEATH ‘E’ FITTINGINTERNAL SPRAY

202CAP-A3Push Button Head CA

$99.55

202POL-S-R2 Prophy Head CA2:1 Reduction

$165.00

202EN60 Twist Head CA60º Right and Left

$115.5060º

60º

60º

202CAP-R4-B3 CA Sheath 4:1 Reduction ... $248.50

12 MONTH WARRANTY

BEING LOW SPEED HANDPIECE ‘E’ FITTING REDUCTION EXTERNAL SPRAY

201CA-R4CA HandpiecePush Button4:1 ( Reduction )$198.00

12 MONTHWARRANTY

CLEARANCE SALE OFF MARKED PRICE

[offer subject to stock availability ]


Low Speed Handpieces and Motors

13

BEING AIR MOTOR AND LOW SPEED HANDPIECES ‘E’ FITTING INTERNAL SPRAY

202CAP Push Button CA 1:1 Standard ... $248.50 202CAP-B Push Button CA F.O. 1:1 Standard ... $396.00

202CAP-R4 Push Button CA 4:1 Reduction ... $330.00 202CAP-R4-B Push Button CA F.O. 4:1 Reduction ... $495.00

202SH Straight 1:1 Standard ... $248.50 202SH-B Straight F.O. 1:1 Standard ... $396.00

202AM-M4 Air Motor 4 Holes 24,000 r.p.m. ... $275.00 202AM-M4-B F.O. Air Motor 4 Holes 24,000 r.p.m. ... $445.50

INTERNAL SPRAY FIBRE OPTIC INTERNAL SPRAY

12 MONTHWARRANTY

12 MONTH WARRANTY 12 MONTH WARRANTY


• High torque• Hand or foot control• Variable speed control 2,000 - 32,000 rpm• Right and left turning ability

Handy ECOBrushless Micromotor

complete set$1,375.00

Brushless Micromotoronly

$880.00

SDE-H35E MARATHON LABORATORY MICROMOTORMARATHON HANDY ECO LABORATORYBRUSHLESS MICROMOTOR

$797.50$385.00

$68.75

$68.75

$99.55

$68.75$247.50

H-DENT LOW SPEED HANDPIECES EXTERNAL SPRAY MODERN LOW SPEED HANDPIECE ‘E’ FITTINGEXTERNAL SPRAY

CLEARANCE SALE OFF MARKED PRICE[offer subject to stock availability ]

CLEARANCE SALE OFF MARKED PRICE[offer subject to stock availability ]

G1 Prophy Screw-in 1:1 ... $126.50

L1 Standard CA Latch 1:1 ... $115.50

50-6

3 cm

HE

IGH

T

42 cm

47 cm

• Ultra stable base• colours available: Medium Blue, Dark Blue and Black

DOCTOR STOOL

MEDIUM BLUE DARK BLUE BLACK

Doctor Stool$495.00

AUTOCLAVEACCESSORIES

Helix Tester Set .... $445.50

Bacterilolgical Filtereach $27.50

Printing Ribboneach $12.65

CURING LIGHT ACCESSORIES

ProtectiveLight Shieldeach $19.80

Curing LightDepth Gauge

each $9.90

• Universal fitting compatible with popular autoclaves

• Compatible with popular autoclaves

• Designed for safe, one handed use• Battery powered ignition lights instantly with just a press of a button• Adjustable flame setting and lock-off switch• Burns up to 30 minutes on one butane fill-up• Size: 14 cm long

PREMIUM AP III DENTAL BURNER

$368.50/set

Test for class B autoclaves to evaluate the capacity of penetration of the steam in hollow loads. Composed of a tube and 250 colour testers to confirm sterilization


C10 Light Meter $59.95

C10 LED & HALOGENCURING LIGHT METER

• Measures intensity up to 2500 mw/cm²• Size: 110 mm x 68 mm x 33 mm

24 MONTH WARRANTY $880.00/unit[ offer subject to stock availability ]

$295.00

$59.95$198.00

$990.00

BORNART E1 ELECTROSURGERY UNIT

• Cut COAG 1 & COAG 2 mode with 10 level power cutting• User friendly control panel• Minimal scar tissue formation• Work frequency: 1.3 - 1.7 MHz ± 5%• Max. out power: 50 W (@400 ohm load) • Size: W23 cm x D22.5 cm x H8.3 cm

A08 DENTAL APEX LOCATOR

12 coloursavailable:

Pink Orange Yellow L. Green Green Lime

L. Blue Blue Lavender L. Lavender White Black

A08 Apex Locator .... $385.00A08-1 Battery ............ $59.95A08-2 Spare Probe .... $38.50A08-3 Spare Hook ...... $49.50A08-4 Spare Cord ...... $38.50A08-5 Spare Clip ........ $49.50

24 MONTHWARRANTY

• Bright LCD screen with the trajectory of the file being clearly indicated by different colours• Foldable design with adjustable view angle, saves space and protects the screen• The unit is designed with a smooth seamless body and membrane buttons to enhance cold sterilization and help avoid cross contamination• Advanced multiple frequency technology with automatic calibrating ensures accurate measurement• Measurement results are not affected by tooth type, size of root canal or the internal environment of root canal• Different beep tones indicate the position of the file in the root canal• Rechargeable lithium battery• Accessories autoclavable up to 134ºC• Screen size: 110 mm x 70 mm• Overall size: L122 mm x W118 mm x H25 mm• Weight: 300 gms ( including battery )


Sundries

PIEZO ULTRASONIC SCALERS with endo function

UDS-E (EMS1 TYPE) PORTABLE SCALER UDS-P (EMS1 TYPE) TABLE TOP SCALERUDS-N3 (EMS1 TYPE) BUILT-IN SCALER

ARE NOW AVAILABLE WITH LED LIGHTComplete with 8 Tips(G1, G4, G5, G6, P1, P3, P4D and E1)

Complete with 6 Tips(G1x2, G2, G4, P1 and E1)Size:- W18 cm x D14.5 cm x H9 cm

UDS-E LED Portable Scaler Set ............. $990.00Plastic Bottle Large 500 ml ....................... $27.50Plastic Bottle Small 350 ml ....................... $27.50

UDS-P LED Table Top Scaler Set

$396.00

UDS-E LED(EMS1 TYPE)

PORTABLESCALER

DTE-V3 LED (SATELEC2 TYPE) BUILT-IN SCALERUDS-N3 LED (EMS1 TYPE) BUILT-IN SCALER

UDS-P LED (EMS1 TYPE) SCALER

UDS-N3 LED Kit (EMS1 Type) Built-in LED Scaler with 6 Tips(G1T x 2, G2T, G4T, P1T and E1T) ........................... $396.00

DTE-V3 LED Kit (SATELEC2 Type) Built-in LED Scaler with 6 Tips(GD1T x 2, GD2T, GD4T, PD1T and ED1T) ............. $396.00

Size:- W8 cm x D6 cm x H4 cm

UDS-N3 LED KIT (EMS1 TYPE)

DTE-V3 LED KIT (SATELEC2 TYPE)

Medical solutionor distilled water from

self-contained liquid bottle

1 EMS is a registered trademark of Electro Medical System S.A. Switzerland 2 SATELEC is a registered trademark of Satelec/Acteon Group France

TITANIUM SCALER HANDPIECES

HW-3H (Woodpecker, EMS1 Type) Non-LED Scaler Handpiece .... $198.00 HD-7H (DTE, SATELEC2 Type) Non-LED Scaler Handpiece .... $247.50

HD-7L (DTE, SATELEC2 Type) LED Scaler Handpiece .... $247.50HW-5L (Woodpecker, EMS1 Type) LED Scaler Handpiece .... $220.00

1 EMS is a registered trademark of Electro Medical System S.A. Switzerland 2 SATELEC is a registered trademark of Satelec/Acteon Group France



Scalers


FOR WOODPECKER, EMS1 , DTE, SATELEC2, NSK3 or SIRONA4 Type ScalersSCALER TIPS STAINLESS STEEL

G1 (WOODPECKER, EMS1 Type)GD1 (DTE, SATELEC2, NSK3 Type)GS1 (SIRONA4 Type)






P1 (WOODPECKER, EMS1 Type)PD1 (DTE, SATELEC2, NSK3 Type)PS1 (SIRONA4 Type)

P2L (WOODPECKER, EMS1 Type)


P2R (WOODPECKER, EMS1 Type)


P2LD (WOODPECKER, EMS1 Type)PD2LD (DTE, SATELEC2, NSK3 Type)

P3D (WOODPECKER, EMS1 Type)PD3D (DTE, SATELEC2, NSK3 Type)PS3D (SIRONA4 Type)

P2RD (WOODPECKER, EMS1 Type)PD2RD (DTE, SATELEC2, NSK3 Type)

SB1 (WOODPECKER, EMS1 Type)SBD1 (DTE, SATELEC2, NSK3 Type)

SBL (WOODPECKER, EMS1 Type)SBDL (DTE, SATELEC2, NSK3 Type)


SBR (WOODPECKER, EMS1 Type)SBDR (DTE, SATELEC2, NSK3 Type)


Supragingival Scaling

Supragingival Scaling Supragingival Scaling

Supragingival ScalingSupragingival Scaling


Periodontal Scaling

Periodontal Scaling

Periodontal Scaling

Periodontal Scaling

Remove calculus from narrow inter-root spaces (diamond-coated)

Remove calculus from narrow inter-root spaces(diamond-coated)

Periodontal Scaling

For occlusal surface and cervicalmargins preparation

Half ball diamond tip. Set 45° tothe left, to remove the carious teethwithout damaging the adjacent teeth.

Half ball diamond tip. Set 45° tothe right, to remove the carious teethwithout damaging the adjacent teeth.

Remove the carious teeth withoutdamaging the adjacent teeth

Remove the carious teeth withoutdamaging the adjacent teeth

SCALING

PERIO

G1

G2

G3

G4

G5

G6

P1

P3

P4

P3DP2RD

P2L

P2R

P2LD

SB1

SB2

SB3

SBR

SBL

CAVITY PREPARATION

Smoothing restoration overhangs and debride in-depth root (diamond-coated)





NSK3 G2Satelec2 #2


Satelec2 #1


Comparable withEMS1 Type DPL3


Satelec2 #10P

each $38.50

each $38.50

each $49.50

each $49.50each $49.50

each $33.55

each $38.50

each $38.50

each $27.50

each $27.50

each $33.55

each $33.55

each $33.55

each $33.55

each $59.95 each $59.95

each $59.95 each $59.95

each $59.95

C&B

each $38.50

GD7 (DTE, SATELEC2, NSK3 Type)Crown Removal

G7


Scaler Tips

Buy 2 get1

(same number)

SCALER TIPS STAINLESS STEEL FOR AMDENT6 Type Scaler

6 AMDENT is a registered trademark of Amdent AB Sweeden

E1 (WOODPECKER, EMS1 Type)ED1 (DTE, SATELEC2, NSK3 Type)ES1 (SIRONA4 Type)

ENDO


E10D (WOODPECKER, EMS1 Type)ED10D (DTE, SATELEC2, NSK3 Type)


E3D (WOODPECKER, EMS1 Type)ED3D (DTE, SATELEC2, NSK3 Type)ES3D (SIRONA4 Type)

P4D (WOODPECKER, EMS1 Type)PD4D (DTE, SATELEC2, NSK3 Type)PS4D (SIRONA4 Type)



E15 (WOODPECKER, EMS1 Type)ES15 (SIRONA4 Type)


E8 (WOODPECKER, EMS1 Type)ED8 (DTE, SATELEC2, NSK3 Type)

E5 (WOODPECKER, EMS1 Type)ED5 (DTE, SATELEC2, NSK3 Type)

E9 (WOODPECKER, EMS1 Type)


FOR WOODPECKER, EMS1 , DTE, SATELEC2, NSK3 or SIRONA3 Type ScalersSCALER TIPS STAINLESS STEEL

120° Endo Holder, for root canal cleaning

Used for root canal retrogression, efficient root apical polishing (diamond-coated)

95° Endo Holder, for root canal cleaning

For the lateral thermal condensation of gutta-percha

Used to remove the calcification and filling material of pulp cavity (diamond-coated)

Remove calcification in the coronal third of the root canal (diamond-coated)

Remove obstructions and broken instruments in the root canal

Remove obstructions andbroken instruments in the root canal, with irrigation

For retreaments and remove hard materials (diamond-coated)

Remove root canal fillings and broken instruments in the coronal third

Remove root canal fillings and broken instruments in the coronal third, with irrigation

Remove dental overhangs in thepulp chamber (diamond-coated)

Bur Holder, to enlarge root canal


E5D

E1

E2

E3

E3D

P4D

E4

E4D

E5

E8

E9

E10D

E14

E15


each $38.50

each $38.50

each $38.50

each $59.95

each $59.95

each $59.95

each $59.95

each $59.95

each $68.75

each $68.75

each $59.95

each $59.95

each $59.95

each $68.75

Comparable withSatelec2 #PM4

Comparable withNSK3 E7D

Satelec2 #ET18D


NSK3 E6Satelec2 #S07

A1 (AMDENT6 Type)Supragingival Scaling( #37 ) A1T (AMDENT6 Type)

Supragingival Scaling( #37 )

Titanium Coated

A2 (AMDENT6 Type)Supragingival Scaling( #39 )

each $68.75

each $68.75

each $77.55




Sundries

$395.00

MONITOR MOUNTSPREMIUM 17" LCD MONITOR

G1T (WOODPECKER, EMS1 Type)GD1T (DTE, SATELEC2, NSK3 Type)







Supragingival Scaling Supragingival Scaling

Supragingival ScalingSupragingival Scaling


SCALING

P1T (WOODPECKER, EMS1 Type)PD1T (DTE, SATELEC2, NSK3 Type)

PD2LT (DTE, SATELEC2, NSK3 Type)Periodontal Scaling Periodontal Scaling

PERIO

P3T (WOODPECKER, EMS1 Type)PD3T (DTE, SATELEC2, NSK3 Type)

PD2RT (DTE, SATELEC2, NSK3 Type)Periodontal Scaling

Periodontal Scaling

P4T (WOODPECKER, EMS1 Type)PD4T (DTE, SATELEC2, NSK3 Type)Periodontal Scaling

E1T (WOODPECKER, EMS1 Type)ED1T (DTE, SATELEC2, NSK3 Type)

E3T (WOODPECKER, EMS1 Type)ENDO

E2T (WOODPECKER, EMS1 Type)ED2T (DTE, SATELEC2, NSK3 Type) ED4T (DTE, SATELEC2, NSK3 Type)

E8T (WOODPECKER, EMS1 Type) E5T (WOODPECKER, EMS1 Type)ED5T (DTE, SATELEC2, NSK3 Type)

1. EMS is a registered trademark of Electro Medical System S.A. Switzerland2. SATELEC is a registered trademark of Satelec/Acteon Group France3. NSK is a registered trademark of Nakanishi Inc. Japan

G1T

G2T

G3T

G4T

G6T

G5T

E1T

E2T

E3T

E4T

E8T E5T

P1T

P3T

P4T

P2RT

P2LT

each $33.55

each $33.55

each $38.50

each $38.50

each $38.50

each $77.55

each $44.55

each $77.55

each $44.55

each $59.95

each $77.55

each $59.95each $77.55

each $68.75 each $77.55

each $38.50

each $38.50

C&BG8T (WOODPECKER, EMS1 Type)G8T

each $39.60

Crown Removal, with Irrigation

120° Endo Holder, for root canalcleaning

95° Endo Holder, for root canalcleaning

For the lateral thermal condensation of gutta-percha

Remove obstructions and broken instruments in the root canal

Remove root canal fillings and broken instruments in the coronal third






NSK3 G2Satelec2 #2


Satelec2 #1



Satelec2 #10P


NSK3 E6Satelec2 #S07

FOR WOODPECKER, EMS1 , DTE, SATELEC2, NSK3 Type ScalersSCALER TIPS STAINLESS STEEL TITANIUM COATED Non-Sticky, Longer Lasting


Scaler Tips and Built-in Curing Light

LED.G BUILT-IN CURING LIGHT (5 WATTS)LED.G Built-in 24V

$198.00$59.95$19.80


Buy 1 get1

(same number)

GK1 (KAVO5 Type)SONICflex5 Type

SCALER TIPS STAINLESS STEELFOR KAVO5 Type Air Scalers




EK8 (KAVO5 Type)SONICflex5 Type


GC1 (KAVO5 Type)SONOsoft5 Type


GC2 (KAVO5 Type)SONOsoft5 Type


PC1 (KAVO5 Type)SONOsoft5 Type

5. KAVO, SONICflex, SONOsoft are registered trademarks of Kavo Dental GmbH Germany

Subgingival Scaling

Supragingival and Subgingival Scaling




Bur Holder, to enlargeroot canal







Scaler and Ultrasurgery Accessories

each $59.95

each $59.95

each $59.95

each $59.95

each $59.95

each $59.95

each $59.95

each $59.95

each $59.95

each $59.95

each $59.95

15#

20#

25#

30#

35#

40#

TORQUE WRENCHES• Autoclavable• Holds Scaler tip inside• Colour:

• Excellent tenacity• 6 pieces per tube• Length: 32.5 mm

SCALER HANDPIECE CABLES

TW-1L Torque Wrench ( WOODPECKER, EMS1 Type ) ... $24.75TD-1L Torque Wrench ( DTE, SATELEC2, NSK3 Type ) .... $24.75TS-1L Torque Wrench ( SIRONA4 Type ) ........................... $24.75

Scaler Handpiece Cable( WOODPECKER, EMS1 Type ) ... $59.95Scaler Handpiece Cable( DTE, SATELEC2 Type ) .............. $59.95LED Scaler Handpiece Cable( WOODPECKER, EMS1 Type ) ... $68.75LED Scaler Handpiece Cable( DTE, SATELEC2 Type ) .............. $68.75

each $19.80 each $22.55

each $27.50each $33.55

AUTOCLAVABLETIP HOLDER No.1

AUTOCLAVABLETIP HOLDER No.2

ENDO WRENCH MALE QUICKDISCONNECTOR

SCALER ACCESSORIES

SCALER U-FILES

U-Files,6 pcs/tube$16.50

1 EMS is a registered trademark of Electro Medical System S.A. Switzerland2 SATELEC is a registered trademark of Satelec/Acteon Group France3 NSK is a registered trademark of Nakanishi Inc. Japan4 SIRONA is a registered trademark of Siroa Dental System


Buy 2 get 1


UI1 (IMPLANTATION)Used for implantwith tip ball Φ1.6 mm

UI1

5 7 9

3

each $137.50

US3 (BONE SURGERY)

US4 (BONE SURGERY) US5 (BONE SURGERY)

UL1 (SINUS LIFTING)UL4 (SINUS LIFTING)

UL2 (SINUS LIFTING)

UL5 (SINUS LIFTING)

Osteotome of precision in the thin regions

Bone chip harvestingcrown lengthening

Bone remodeling and bone chip harvesting

Peeling of the sinusmembrane Micrometric osteotomy

near the soft tissue(diamond-coated) *Diamond Grit: 100 μm.

Peeling of the sinusmembrane

Peeling of the sinusmembrane (angle: 95°)

UL24.4

2.5

UL1

120°0.8

7.4

UL5

95°

4.7

0.8

US5

0.6

7.5

US4

0.8

7.4

US3

2.7

4.5

UL4

4

3

each $137.50

each $137.50 each $137.50

each $137.50

each $137.50

each $137.50

each $137.50

ULTRASURGERY TIPS(Compatible with Woodpecker and Mectron* Type Units)



Sundries

Chemistry BehindEvery Smile

Compact

Ultra-Light

Simple

Accurate

Intuitive• 8 Pre-set dental shooting modes• 12 megapixel CMOS sensor• Precise and detailed images with exceptional depth of field• Exclusive FlashMatic system for true colour reproduction• Auto-cropping, smart focus and zoom• Water, chemical and scratch resistant• Single handed operation, even with medical gloves• Lightweight: approx. 590 grams• Intuitive one-touch operation• Wi-Fi memory card compatible for instant upload of clinical photos to operatory computer

Image documentation is an integral part of the modern dental workflow. However, it needs to be easy, quick and delegable with consistent results.

EyeSpecial C-III is the digital dental camera that enables all the dental team members to achieve predictable results every time, regardless of their experience.

Designed for smart digital dental photography, EyeSpecial C-III produces predictable clinical photographs for case documentation, diagnosis, treatment planning, patient communication and education, medico-legal and insurance verification, dental lab collaboration, quality assurance of the dental treatment and follow-up.

for more information,please contact us today.

Smart Digital Camerafor the

Entire Dental Team

each$5,995.00/set

FunctionKeys

Spot Focus Speaker

Set KeyMenu Key

SHOFU EyeSpecial C-III DIGITAL DENTAL CAMERA Designed Exclusively for dentistry

$5,500.00/set

12 MONTHWARRANTY

Documents

Equipment May 2020 20P P1 D - horseley.com.au · G1 G2 G4 P1 E1 G4 G5 G6 P1 P3 P4 P4D E1. ORDER HOT LINE - TEL: 1300-130-718 FAX: 1300-130-719 3 Scaler Handpieces and Accessories