Upload
juan-jose-vinas-mendez
View
221
Download
3
Embed Size (px)
DESCRIPTION
Equivalencia entre normas
Citation preview
European Steel and Alloy Grades / Numbers
SteelNumber.com
HomeSteel
numbersSteel and cast iron
standardsAlloy
standardsEquivalent
gradesSearch
Russian steels
About us
YOU HERE: Steel numbers -> Number 1.00XX OR Steel and cast iron standards -> / EN 10025-2
S185 ( 1.0035 )
Grade : S185
Number: 1.0035
Classification: Non-alloy quality structural steel
Standard: EN 10025-2: 2004 Hot rolled products of structural steels. Technical delivery conditions for non
structural steels
Equivalent grades: Go here
Chemical composition % of grade S185 (1.0035): EN 10025-2-2004
-
Chemical composition is not specified
Mechanical properties of grade S185 (1.0035)
Nominal thickness (mm): to 3 3 - 100 100 - 150 150 - 250
Rm - Tensile strength (MPa) flat and long products 310-540 290-510 280-500 270-490
Nominal thickness (mm): to 16 16 - 40 40 - 63 63 - 80 80 - 100 100 - 150 150
ReH - Minimum yield strength (MPa) flat and long products
185 175 175 175 175 165
Nominal thickness (mm): to 1 1 - 1.5 1.5 - 2 2 - 2.5 2.5
A - Min. elongation Lo = 80 mm (%) parallel, 10 11 12 13 14
Nominal thickness (mm): 3 - 40 40 - 63 63 - 100 100 - 150 150 -
A - Min. elongation Lo = 5,65 √ So (%) parallel, 18 17 16 15 15
Equivalent grades of grade S185 (1.0035)
Aluminum Composite MaterialLeading Aluminium Composite Panel, [email protected] T:008613962238789
► Steel Material ► Structural Steel ► Stainless Steel ► Alloy Steel MetalAdChoices
Warning! Only for reference
USA-
GermanyDIN,WNr
JapanJIS
FranceAFNOR
EnglandBS
European oldEN
ItalyUNI
BelgiumNBN
SpainUNE
ChinaGB
SwedenSS
CzechiaCSN
FinlandSFS
AustriaONORM
A283A A283B Gr.A
S185 St33
SS330 A33 15HR 15HS S185
Fe310-0 Fe320 A320 A310-0
Q195 1300-00
10000 Fe33 St00H St320
Mechanical properties
����eH Minimum yield strength / Mindestwert der oberen Streckgrenze / Limite d elasticite minimale
����m Tensile strength / Zugfestigkeit / Resistance a la traction
���� Minimum elongation / Mindestwert der Bruchdehnung / Allongement minimal
J Notch impact test / Kerbschlagbiegeversuch / Essai de flexion par choc
Heat treatment conditions
+A Soft annealed
+AC Annealed to achieve spheroidization of the carbides
+AR As rolled
+AT Solution annealed
+C Cold drawn / hard
+CR Cold rolled
+FP Treated to ferrite-pearlite structure and hardness range
+I Isothermal annealing
+LC Cold drawn / soft
+M Thermo mechanical rolling
+N Normalized
+NT Normalized and tempered
+P Precipitation hardened
+PE Peeled
+QA Air quenched and tempered
+QL Liquid quenched and tempered
+QT Quenched and tempered
+S Treated to improve shearability
+SH As rolled and turned
+SR Cold drawn and stress relieved
+T Tempered
+TH Treated to hardness range
+WW Warm worked
+U Untreated
Non-alloy quality structural steel S185 (1.0035)Chemical composition , Equivalent grades , Standards, Properties , Hardness , Strength , Elongation
European Steel and Alloy Grades / Numbers © 2011- 2015 All rights reserved. The contents from this site may not be reproduced.
The entire risk as to use of these content is assumed by you the user
Aluminum Composite MaterialLeading Aluminium Composite Panel, [email protected] T:008613962238789