View
401
Download
2
Tags:
Embed Size (px)
Citation preview
Name of the speaker 1
Coatings Research Institute
Decorative Indoor Paint for Thermal
Comfort and Energy Saving
Bilbao Nov. 2012
ERA-NET REGIONAL EVENT
2
Project idea description
• Condition of mind which expresses
satisfaction with the thermal environment
It has been long recognized that the sensation of
feeling hot or cold is not just dependent on air
temperature alone
Name of the speaker, title of the project idea
Wall isolation Anti-condensation
Project idea description
• Operative temperature To is defined as an uniform temperature of a
radiantly black enclosure in which an occupant would exchange the
same amount of heat by radiation plus convection as in the actual
non-uniform environment [1]
Building heating systems
1.ASHRAE Terminology, ASHRAE Handbook CD, 1999-2002
YOUR NAME 3
50% convection 50% radiation
About 50% of energy from a
building heating system is
radiated in the thermal infra-red
region (2.5 to 50 microns range).
Conventional decorative paints
absorb IR Radiations leading to
loss of heat energy
Project idea description
• In design, operative temperature can be defined as the average of
the mean radiant and ambient air temperature: T0 = (Tair + Twall)/2
YOUR NAME 4
Main goals
– Increase thermal inertia of wall and roof by using
paint with low thermal conductivity
• Hollow glass bead and/or ceramic
– Thermal conductivity 0,2 - 0,06 Wm-1K-1
– Low density 0,7 - 0,25 g/cm³
– Size average Ø 12 - 50µm
– Combine with switchable IR – Absorber component
– Multifunctionnality of these paints: • Biosourced, water based
• Anti-humidity, Anti-mould, Anti-condensation
• Electromagnetic isolation
YOUR NAME 5
Expertise/Partners
• Existing Expertise/ Partners already involved
• CoRI: Paint formulation and characterization (rheology,
thermal properties, electromagnetic isolation, …)
• CSTC: Measurement and simulation for thermal properties
of building
• UCL – Unité MEMA: Numerical simulation (Digimat)
YOUR NAME 6
7
Additonal Expertises Sought
• research centers
• Industrials
– Suppliers of glass beads or ceramics beads
– Supplier of paint interested with commercilisation of the
results
8
Contact details
Carine Lefèvre
General Manager
Avenue Pierre Holoffe, 21
BE-1342 Limelette
Belgium
• Phone +32(0)2/653.09.86
• Mobile +32(0)475/384-923
• E-mail [email protected]
Pierre Fiasse NCP Wallonie 9
Electrochemical measurements
applied to metal based biomaterials
Bilbao Nov. 2012
ERA-NET REGIONAL EVENT
10
Project idea description – Idea
To study the corrosion of metal based biomedical materials
(implants for bone reconstruction,…) using electrochemical
techniques (local, global)
– Main goals
• Biomaterials used as biodegradable medical devices:
control the corrosion rate
• Biomaterials used for protecting medical devices against
corrosion (coatings): understanding the corrosion
resistance through the study of electrochemical properties
• Need to carry out : electrochemical measurements,
mechanical properties measurements, in vivo degradation
and biocompatibility tests.
– Existing Expertise/ Partners already involved
• Expertise in electrochemical measurements to study the
protection of metals and alloys against corrosion.
Pierre Fiasse NCP Wallonie , Electrochemical measurements applied to metal based biomaterials
11
Additonal Expertises Sought
• research centers
– Medical Research center
– Research Center in the field of biomaterials
• Industrials
– Medical devices manufacturer
Pierre Fiasse NCP Wallonie , Electrochemical measurements applied to metal based biomaterials
12
Contact details
Material Science department of the University of
Mons – Belgium (Head of department Prof. M.
Olivier):
Dr Ir Cathérine Vandermiers:
Research Center for Materials Engineering
(Coordinator Prof. M. Olivier)
Dr Marc Poorteman: [email protected]
Pierre Fiasse NCP Wallonie, Electrochemical measurements applied to biomaterials
13
Belsim
Enhancing Data Reconciliation
with Intelligent Decision Support
techniques Bilbao Nov. 2012
ERA-NET REGIONAL EVENT
14
Project idea description
– Idea
• Provide integrated solution for “Intelligent Decision Support”
– Main goals
• Integrate Belsim’s VALI software with data intelligence layer (e.g.
Alarm systems, simulation scenarios, process optimization, data
analysis, etc.) to guide the user to intelligent business decision
based on reliable data provided by VALI
– Existing Expertise/ Partners already involved
• Belsim is the leading provider of Data Reconciliation solutions
with its in-house software VALI for improved data quality
(measurement errors are removed through rigorous
thermodynamic modelling of processes)
– Target industry sectors
• Oil & gas downstream (refineries) and upstream
(onshore/offshore oil & gas production)
• Power & utilities
Name of the speaker, title of the project idea
15
Additonal Expertises Sought
• research centers
– R&D on fields of activity that can be coupled with existing
Data Reconciliation software VALI
• Industrials
– Companies from targeted industry sectors willing
to participate in such pilot projects as provider of
test cases and/or sponsor
Name of the speaker, title of the project idea
16
Contact details
Robert CHARES, PhD
Responsible for Research, BELSIM
+32 4 259 8882
Belsim website: www.belsim.com
Name of the speaker, title of the project idea
Additive Manufacturing
Thierry Dormal
[email protected] (biomedical applications)
SIRRIS – ADD department
18
SIRRIS – ADD (1990 – 2011) • 15 engineers and technicians
• 15 AM machines
In-house additive technologies • Stereolithography (normal & hi-res)
• Paste polymerisation for ceramics and metals (2 Optoform)
• 3D Printing of plaster and metal powder (Z-Corp + 2 Prometal)
• Laser sintering of polymeric powder (PA,…): P360 – P390
• Objet Connex 500: bi-material
• Laser Melting (MTT) SLM 250 HL
• EBM Arcam A2 (Titanium & CoCr)
• Laser Cladding (Irepa Laser EasyCLAD)
• 3D Printing of wax (Thermojet)
• Makerbot Replicator
•3D scanning & metrology (GOM, Metris, Wenzel)
20/12/2007 © sirris 2007 | www.sirris.be |
19
Research projects
• 60 %
• EU, Belgian, regional projects
• Dissemination of results
Industrial projects • 40 %
• Direct dedicated research
• Technology transfer & trainings
• Services
• Focus on aerospace and biomedical fields
• +/- 500 projects / year
20
•
•
•
•
[Sirris ADD]
21
•
•
SIRRIS redesign (Compolight)
22
23
•
•
•
•
•
24
• Porous scaffolds in Hydroxyapatite & TCP
• Testing on various scaffold 3D structures for bone integration
• Spine and maxillofacial surgery
• Macro-porosity ~= 500 µm
• In vivo testing
HA parts
SiC parts
25
Controlled Porosity LightWeight solutions – 3D structures
Quality, Repeatability,
Standards Sustainability
Composites SiC+ alu, Connex digital materials…
SIRRIS ADD – Actual & Future developments
Titanium, Inconel, aluminium
Nano particles incorporation
Bio-Medical applications
Functionally Graded materials and
porosity