Gasoline, oxygenated gasoline, crude oil, LPG, solvents, fragrances, polymers and moreall this with a single analyzer in full compliance with the latest standards such as ASTM D5188, D5191, D6377, D6378, D6897, EN 13016, etc. Approved by international governmental bodies including the EPA, CARB, US Military, NATO as well as all leading petroleum companies.

ERAVAP VAPOR PRESSURE TESTING AT ITS BEST

One Vapor Pressure Tester for All Applications:

PERFORMANCE YOU CAN RELY ON

NEW! Peak precision

paired with on-screen quality control

(ASTM D6299)

VAPOR PRESSURE TESTING AT ITS BEST

Maximum FlexibilityERAVAP was designed by an internationally renowned team of vapor pressure experts to cover a wide variety of different measurement scenarios. The first quality that catches the eye, however, is its push-button simplicity.The areas of application range from the use at terminals to freely programma-ble test methods for R&D laboratories. With its extended temperature range from -20 to 120°C (4 to 248°F) and V/L ratios down to 0.02 it can cope with the most difficult measurement scenarios as well as with routine analysis. An auto-switching power supply unit accepting voltage inputs between 85 and 264 V complements the broad applicability of ERAVAP. In combination with a 12 V power adapter it can be even field deployed and run by a vehicle battery.

Unmatched PrecisionERAVAP supports both piston-based mini methods ASTM D5191 and D6378 for vapor pressure measurement. These methods are currently the best received industry-wide, because they require no external vacuum pump. Of these two, the ASTM D6378 method is even easier to carry out, because it needs no sample preparation before the measurement. The triple expansion measurement principle used eliminates any operator bias. ERAVAP exceeds the precision statements of both methods.The outstanding precision of the ERAVAP is the result of combining the in-novative measurement cell design with a choice of cutting-edge instrument parts. Among those count a self-lubricating piston drive, a built-in shaker motor and state-of-the-art solenoid valves that prevent cross contamination between samples. Therefore, the ERAVAP instrument clearly outperforms the standard methods in terms of repeatability and reproducibility (r = 0.3 kPa, R = 0.7 kPa).

On-screen Quality ControlERAVAP performs quality assurance measurements in full compliance with ASTM D6299. It allows to monitor up to 8 quality control samples in parallel. This makes it easy to continuously verify the system’s high perfor-mance on individual control charts for each different sample.To perform efficient quality control, the user can set individual warning levels to suit the measurement’s parameters. In ERAVAP it is possible to set warning levels between 1 and 3 times the standard deviation. If a quality control sample measurement falls out of this range, the instrument auto-matically displays a warning message. There is no need to check the control chart manually.

7” color touchscreen for easy operation.

Learning to operate the analyzer is a

matter of seconds!

1 temperature sensor2 insulation3 outlet valve4 waste container5 manifold

6 sample7 inlet valve8 measuring cell9 piston with

pressure sensor

1

2

354

76

8

9

VAPOR PRESSURE TESTING AT ITS BEST ERAVAP

Unrivaled SpeedThe standard measurement time of ERAVAP is as little as 5 minutes. Paired with the unique VP-V/L Speed TestTM this makes it the fastest vapor pressure tester on the market. It can automatically measure T(V/L) values according to ASTM D5188 together with ASTM D5191 or ASTM D6378 vapor pressure values with a single click. The measurement results are displayed and stored under the same sample ID. When used with the optional 10-position autosam-pler the analyzer can perform up to 20 fully auto-mated measurements. There is no need for operator intervention at all.

Solid DurabilityWith its quality-centric design ERAVAP is made for longest durability as well as peak performance. The self-lubricating measurement cell is the instrument’s centerpiece. Powerful Peltier elements for heating boost its efficiency. Combined, these parts guarantee that the ERAVAP is built for highest sample throughput rates at minimum maintenance. Temperature and pressure calibrations are performed without disassembling the instrument, which reduces down-times to an absolute minimum. For fastest on-site recalibration – even with-out certified equipment – it is also possible to simply use pure substances to calibrate ERAVAP.

Autosampler for Unattended AnalysisThe 10-position autosampler lets youmaximize your sample throughput while saving precious operator time. The sampler is directly attached and performs measure-ments without operator intervention.

VAPOR PRESSURE TESTING AT ITS BEST

Standard Model:

EV01 ERAVAP for gasoline, crude oil, T(V/L) and LPG Pressure range: 0 – 1000 kPa (0 – 145 psi, 0 – 10 bar)Temperature range: 0 – 120°C (32 – 248°F)Results: DVPE, RVPE, PABS, PGAS, PTOT, ASVP & AVP

Temperature Extension Module:

EV01-COOL Low Temperature ModuleThis temperature extension module enables vapor pressure testing at temperatures below 0°C (32°F). It extends the standard measuring range to the total temperature range of -20 to 120°C (-4 to 248°F). ERAVAP can be easily upgraded anytime to include this low-temperature functionality.

High Pressure Model for LPG according to ASTM D6897:

EV02 ERAVAP LPGPressure range: 0 – 2000 kPa (0 – 290 psi, 0 – 20 bar)Temperature range: 0 – 120°C (32 – 248°F)Optional upgrades: gasoline, T(V/L)

... for All ApplicationsWith its innovative design ERAVAP measures gasoline, oxygenated gaso-line, crude oil and LPG as well as any other solvent - even polymers can be characterized. It is used worldwide by various refineries, terminals, oil and pipeline companies as well as independent laboratories, car manufac-turers and in aviation. A small footprint, true portability and its rugged aluminum casing make it the ideal choice even for mobile laboratories.

It comes preconfigured with the correlation formulas developed by the USEnvironmental Protection Agency (EPA) for calculating the Reid vapor pres-sure according to ASTM D323 and ASTM D4953. The California Air ResourceBoard (CARB) relies on the unrivaled precision of ERAVAP as their referenceinstrument. The very same instrument is field deployed by the USmilitary in mobile laboratories around the world.

For special R&D applications ERAVAP offers individual programs for volatilitystudies over a wide temperature range and at very low V/L ratios. Curve programs are available for ASTM D5188, D5191, D6378, D6377 and D6897.

A Single ERAVAP ...

VAPOR PRESSURE TESTING AT ITS BEST ERAVAP

Available test methods ASTM D5188, D5191, D6377, D6378, D6897, EN 13016-1, EN 13016-2, IP394, IP409,

IP481, JIS K2258-2,SHT 0769, GOST 52340

EPA/CARB/US Military & NATO reference methods

Excellent correlation to ASTM D323, D2533, D4953, D5190, D5482 and D1267

Freely programmable methods

Temperature range 0 to 120°C (32 to 248°F) with Peltier technology - No external cooling is required.

EV01-COOL: -20 to 120°C (-4 to 248°F) - External cooling required

Temperature stability 0.01°C (0.02°F)

Pressure range EV01 ERAVAP: 0 to 1000 kPa (0 to 145 psi)

EV02 ERAVAP LPG: 0 to 2000 kPa (0 to 290 psi)

Pressure units (selectable) hPa, kPa, psi, mmHg, Torr, at, atm

Pressure resolution 0.1 kPa (0.014 psi)

Precision Repeatability: r = 0.3 kPa (0.044 psi), Reproducibility: R = 0.7 kPa (0.102 psi)

Vapor / Liquid ratio Variable from 0.02/1 to 100/1

Single-point, multi-point and curve measurements

Sample introduction Automated via built-in piston. No external vacuum pump is required

Sample volume 1 ml (2.2 ml per rinsing cycle)

Measurement time 5 minutes for a standard measurement

Cleaning By next sample or solvent

Display Industry proven 7” color touch screen

Interfaces Built-in PC with Ethernet, USB and RS232 interfaces

Direct LIMS connectivity via LAN and output to printer or PC

Optional input by external keyboard, mouse and barcode reader

Remote control Remote service capability via Ethernet interface

Result database Over 100,000 detailed test reports storable in internal memory

Operators Over 100 operator names storable

Hazy mark Results can be marked for hazy appearance

Alarm tracking All messages are stored in the database together with the results

Automated calibration routine 10-point probe offset correction table, calibration history tracking, substance

calibration, self-diagnostics

Power requirements Auto-switching 85-264 V AC, 47-63 Hz, 100 W (multi-voltage power supply)

Field application: 12 V/9 A DC (vehicle battery)

Dimensions / Weight 22 x 32 x 28 cm (8.7 x 12.6 x 11 in) / 8 kg (17.6 lb)

Technical SpecificationsA Single ERAVAP ...

Due to continuing product development, specifications are subject to change.All eralytics products are manufactured under ISO 9001 regulations and are CE compliant.

VAPOR PRESSURE TESTING AT ITS BEST

Fast & Easy Operation

All eralytics analyzers use an intuitive menu structure that is easy to navi-gate. Samples need no prior preparation and measurements are done fully automated.

The results are displayed immediately after the test on the large and user-friendly color touch screen. An internal memory holds the measurement results. For convenience, data can be directly saved to USB memory sticks for further processing or a thorough analysis. The data format is compatible with most PC spreadsheet programs, such as Microsoft© Excel. Customized print-out designs are available for easy direct printing.

Vapor pressure testing in four easy steps with ERAVAP

• Select the standard method

• Select/enter sample ID and operator name

• Put the inlet tubing into the sample

• Press RUN to start the fully automated measurement

ERASOFT RCS Remote Control PC Software

The RCS software by eralytics is the ideal tool for operating one or more eralytics analyzers via a PC. As an alternative to LIMS, it allows for conve-nient data transfer and fast analysis of results. It ideally supports the cutting-edge technology and functionalities built into the eralytics instruments.

PERFORMANCE YOU CAN RELY ON

• Multi-instrument networking

• Remote control

• Fast & easy data transfer (results, settings, etc.)

• Software upgrade

• Backup/restore for configurations and unit parameters

VAPOR PRESSURE TESTING AT ITS BEST ERAVAP

Compact Stand-Alone Analyzer

All eralytics instruments are compact stand-alone analyzers with a built-in industrial PC. They represent the latest in technology, designed for long-term, maintenance-free operation. Of course, all eralytics analyzers use cutting-edge industry technology and provide universal data transfer op-tions. Ethernet and USB interfaces allow advanced data management and connectivity to PCs, modern printers, keyboards, PC-mice, barcode read-ers, or other external equipment.

Direct LIMS Communication

A direct out-of-the-box connection to LIMS (Laboratory Information Man-agement System) is established with a standard Ethernet cable. No extra software or PC are necessary.

True Portability

The small footprint of the eralytics instruments makes them the first choice for use in the lab and on-site. Lightweight and built with an integrated carry-ing handle they are ideally suited for mobile applications.

Large Results Memory

Data are stored safely in the large results memory, which holds many thou-sand records. Six user levels and a state-of-the-art password technology protect your test result data from accidental deletion.

Service and Remote Control over the Internet

At the push of a button, firmware and software updates can be downloaded from the internet. The internet connection also allows to remotely control eralytics analyzers or to perform standard service activities.

ERAFLASH TM

The safe side of flashpoint testing - The first and only flashpoint tester on the market to cover the wide temperature range of -25 to 420°C in a single analyzer. Its small sample size and the continuously closed measuring chamber (ASTM D6450 & D7094) guarantee maxi-mum safety and speed at minimum costs.

ERASPEC TM

Spectral fuel analysis in seconds - The portable mid-FTIR spectrometer that is fully automated and multi-fuel capable. With its patented design, it is perfect for fast gas-oline, diesel & jet fuel analysis, delivering precise results for over 40 fuel parameters, like aromatics incl. benzene (ASTM D6277), oxygenates (ASTM D5845), FAME (EN 14078, ASTM D7806), etc. and many fuel properties like Octane, Cetane, Density, Distillation, etc.

ERASPEC OILTM

Portable FTIR oil analysis in seconds - The first truly portable stand-alone analyzer with a patented rugged FTIR spectrometer for high-speed lubricant oil condition moni-toring in full compliance with ASTM, DIN and JOAP methods. With its lightweight build and small footprint, it is a welcome addition to mobile laboratories to deliver a detailed fingerprint of used oil on-site and check degradation and contamination within seconds.

eralytics® GmbH

Lohnergasse 3, 1210 Vienna, AustriaPhone: +43 1 890 50 330Fax: +43 1 890 50 3315office@eralytics.comwww.eralytics.com

eralytics instruments are available worldwide. An international network of over 50 authorized and well trained dealers is ready to answer your inquiries and to offer local support and service.

ERACHECK TM

CFC-free oil-in-water testing - The portable analyzer with the patented QCL-IR technol-ogy for an extraction with the inexpensive and CFC-free solvent Cyclohexane. With its high speed and precision, it is the instrument of choice to detect even sub-ppm concentrations of total petroleum hydrocarbons (TPH) or total oil & grease (TOG) in water in full compliance with ASTM D7678.

Welcome to a New Era of Petroleum TestingUpgrade your lab to the 21st century. Leverage the accuracy, speed and comfortable ease of use that are characteristic of eralytics instruments.