Ergo Solutions Power Modules Energy Management Power Distribution Lighting Control

Ergo SolutionsPower ModulesEnergy ManagementPower DistributionLighting Control

Contents catalogue

Monitor ArmsZgo™ (NEW) 28

Air 30

Motion 32

Motion Double 34

Cygnus 36

Vision 38

Vision Double and Triple 39

Vision Multiscreen (NEW) 40

Vision Laptop Support 41

Vision Thin Client Holder (NEW) 42

Vision Quick Release Head (NEW) 43

Unite Tablet Mount (NEW) 44

Unite iPad Mount (NEW) 45

CPU SupportsSnug 46

Enclose 47

Spin 47

Ladder 48

Cable ManagementSpiral 49

Tidy (NEW) 50

Cableway 51

Cable Eater 52

Fusion 53

Premium 54

AccessoriesTrunking 55

Cable Clip 55

Cable Clamp 55

Desk Grommets (NEW) 56

Page 25

Introduction 4

What We Do 8

About Us 12

Case Studies 20

On DeskUSB Charger (NEW) 62

Micro USB Spool & Adaptor (NEW) 63

Contour 64

Contour Metal (NEW) 66

Harmony 68

Wedge 70

Rotasoc (NEW) 72

In DeskPortHole 74

PortHole II USB Charging (NEW) 76

PortHole III Wireless Charging (NEW) 77

Horizon 78

Af�nity 80

Eclipse 82

Under DeskElite+ 84

Elite+ Data (NEW) 85

Power Master 86

Conti 88

Rotasoc 90

AccessoriesStarter Cables 100

Connector Cables 100

Earth Kits 100

Connectors 101

Locking Clips 101

Connector Blocks 101

Fuses (NEW) 101

PortablePower Tower (NEW) 102

Page 57

Co

nten

ts

www.cmd-ltd.com 2

catalogue Contents

SystemsFootprint 104

Page 103

Under�oor PowerBetatrak 112

Tap Offs 116

Trunking Shallow Flush Floor 120

Trunking Flush Floor 122

Trunking Buried Under�oor 124

Access PowerAccess Floor Box 126

One Piece 128

Individual 130

Integral RCD/RCBO 132

Slab Box 1 Compartment 134




Screed Floor Box 138

Accessory Plates 3 Compartment 140

Accessory Plates 4 Compartment 142

Cable Hives 144

Grommets 148

Black Box Distribution 150

Lighting Busbar25A Lighting Busbar (NEW) 152

40A Lighting Busbar 154

Page 111

Control BoxesSirius Local Switch Module 168

Proxima Basic Marshalling Box 170

Rigel Circuit Distribution Box 172

Canis Lighting Control Module 174

Sensors230v PIR Sensor 178

SELV PIR Sensor 12V 180

Microwave Sensor 182

Pre-Fabricated Wiring SystemsPre-Fabricated Accessories 184

Page 157

All images contained within this catalogue are for illustration purposes only and may be subject to change at any time.

Co

nte

nts

3sales line: +44 (0)1709 829511

Steve Cole, CMD Ltd Managing Director

CMD Ltd introductionIntro

du

ction

www.cmd-ltd.com 4

The BSI ISO 9001 and ISO 14001 accreditation is backed by UKAS, the sole national accreditation body recognised by the UK Government to provide certi�cation, testing & inspection. The UKAS level of service is a recognised symbol as the industry mark of quality. This gives you the con�dence that CMD’s manufacturing processes are carried out to the high standards required by UKAS and that all measurements can be traced back to UK national standards for our Rotherham Head Of�ce manufacturing site and our London showroom (Clerkenwell, EC1).

introduction CMD Ltd

ISO 9001 FM 541560 ISO 14001 EMS 579214

Discover Even More for 2014

You may not be aware that CMD celebrates its 30th anniversary in 2014. We have certainly grown over the years and are no longer simply a Cable Management Division, the root from which CMD takes its name. We have developed �ve distinct product ranges for you to explore within our catalogue.

CMD is a Rotherham based business which utilises the skills and experience of people who live in and around our local community, we have gone from strength to strength as we continue to seize opportunities to grow and prosper. CMD is a market driven company who encourages and values the feedback provided by customers – just review our customer survey results on page 18 and 19, which echoes our operating motto, ‘Customer First’. The lessons we have learned over the years have helped us to create a ‘can do’ culture supported by clearly de�ned Vision and Values and a simple promise; to place our customers, our colleagues and our business at the heart of everything we do.

Boasting over 20 new products, this new product catalogue is the best yet. Packed with inspired ideas for the commercial working space, there is something for every environment. Whether it’s a new USB 2 Amp charger for the desktop, a co-ordinated stylish cable management solution for segregating those power & audio/data cables or the ‘must have’ latest monitor arm with its unique coloured inserts to match your interior, we have it all plus more!

Extra Quality with the CMD Difference.

The ISO accreditation is a globally recognised quality standard, which is awarded to companies that meet a high standard for the way in which they implement internal business processes. Companies are required to demonstrate quality control for every aspect of the business process throughout the organisation ensuring customer service excellence is delivered and continually improved upon.

Intr

od

uct

ion

5sales line: +44 (0)1709 829511

Originally established under the name

Daisy Kitchens focusing on kitchen units

and lighting. During this period, we

entered the power market, originally

importing modules from Wieland

(Germany).

1984The late 80’s saw Powerplan Systems

Ltd established in 1988, introducing a

range of power distribution products for

commercial environments.

1985

Began the start of the journey in bringing

the brands closer together, the London

Showroom was re�tted with a view to

demo and illustrate product working

in harmony from under�oor to desk to

ceiling.

2008

The early 90’s brought with it the

establishment of Form Fittings Ltd,

incorporating Daisy Kitchens with a

focus on power modules manufacturing

on site. The same period introduced the

popular conti modules, alphatrak and

slab �oor boxes.

1990

To further improve ef�ciency and enhance

synergy between the three brands of

DPG, Form Fittings, and Powerplan were

merged to form CMD Ltd. To support the

single brand a raft of new catalogues

and price lists were created, with further

advertising to support.

This move made CMD Ltd the total

solutions provider it is today.

2010

All manufacturing consolidated to one

site at Rotherham to improve ef�ciency.

E-commerce becomes integrated into the

CMD website.

Footprint System launched along with Air

and Motion monitor arms and PortHole.

Footprint shortlisted for Made in Shef�eld,

Electrical Times ‘Best Innovating Power

Product’ and Shef�eld Business Awards.

2012

CMD Ltd timelineIntro

du

ction

www.cmd-ltd.com 6

Joint branding with CMD alongside

DPG/Powerplan and the launch of new

websites for each brand with back end

CMS support allowing for more function

and �exibility.

2009

Following several acquisitions in 1997 the

CMD Group of companies was formed

during the late 90’s which included DPG

Ltd, Form Fittings Ltd, Powerplan Systems

Ltd, AX Distribution, Astrolux, and

Integra. The move brought vast amounts

of experience together and enhanced

cooperation across product ranges.

1995In a bid to focus strategy and future goals,

several companies of the group were sold

off. The remaining companies included

DPG, Form Fittings, and Powerplan,

becoming known as Cable Management

Division (CMD)

2005The years following the millennium

saw a number of key popular products

released onto the market including CPU

Supports, Cable Supports, Through Desk

Power Modules, Monitor Arms, and the

Betatrak Busbar System.

2000

In further support of the brand CMD,

2011 saw the launch of the new

combined CMD Website, incorporating

the entire product range. The same year

also saw the launch of Your Soho, an

e-commerce website focusing on retail

and Rackplus, focusing on online power

distribution unit sales.

2011

2013 saw the launch of our �rst

combined catalogue. This included a

clearer pricing strategy and showcased

our entire range. Rotasoc launched - the

modular plug and play power system

with 360° rotating sockets.

2013

timeline CMD Ltd

A raft of new & exciting products

are launched from our new cable

management solution Tidy to our new

Zgo monitor arm to embracing new

technologies of USB charging and

induction.

2014

Intr

od

uct

ion

7sales line: +44 (0)1709 829511

On Desk Power Modules

Under DeskPower Modules

Lighting SensorsControl Boxes

Access Power

Power Distribution

CMD what we do

Wh

at we d

o

www.cmd-ltd.com 8

In Desk Power Modules EnergyManagement

CPU Supports

CableManagement

Monitor Arms

what we do CMD

Wh

at w

e d

o

9sales line: +44 (0)1709 829511

Footprint is our award

nominated and innovative

energy monitoring and

scheduling desk power

system. Just imagine the

possibilities when you

track and monitor what

desk power is being used

and by making subtle

changes what positive

results can be produced.

A comprehensive range

of under desk, indesk and

desktop power modules

with accessories. Indesk

modules are ideal for

conference rooms. Desktop

power modules allow for

easy access for when you’re

working and our under

desk power solutions range

from the affordable to the

more flexible metal based

extrusion which can be fed

from our underfloor power.

Create environments that

improve performance with

healthy workspaces and

greater productivity. Deliver

a more streamline and

aesthetically appealing space

whether in the office, at

home or on the move. This

section includes monitor

arms, CPU supports, cable

management solutions and

accessories.

CMD mission statement

Wh

at we d

o

www.cmd-ltd.com 10

Our products have been

designed to be easy to

install over traditional

cabling systems with no

requirement for cable

trays and complicated

terminations. We also

have a wide selection

of accessories, tap offs

and grommets to suit

every underfloor power

and lighting busbar

requirement.

Our control boxes with

accessories offer a simple

‘plug and play’ system

giving you a fast install

when you need it most.

This minimises terminals,

so guarantees reduced on

site commissioning.

We are aBritish manufacturer

founded in 1984, whocreate solutions to meet

the challenges of integrating power and technology with

furniture for commercial environments

mission statement CMD

Wh

at w

e d

o

11sales line: +44 (0)1709 829511

We offer an extensive range of standard power and ergonomic solutions. We do however appreciate that there will

be occasions when a more speci�cally designed option is required. Our operating motto is ‘Customer First’ and as

such we take pride in our ability to offer tailor made variations of our products, to suit your unique requirements.

Our experienced team of designers and engineers liaise with our customers to create bespoke items to the highest

standard of performance and quality. We can make the product development process for bespoke items faster,

more creative and ef�cient, because we work in partnership with you, to create your ideal solution.

CMD’s unrivalled experience in the design of ergonomic monitor arms, cable management solutions, power modules

and bracketing for projects on both a national and global stage make us your best choice for a �rst class bespoke

design service.

Bespoke design solutions

Ab

ou

t Us

12 www.cmd-ltd.com

We �nd the solutions to your problems.

design solutions Bespoke

Ab

ou

t U

s

13sales line: +44 (0)1709 829511

Metal

Metal waste is segregated by type

and placed into labelled handling

bins, ready to be collected and

recycled by a registered waste

management company.

Our Corporate Responsibility is clear and de�ned; we are committed to continually reducing our impact on the

environment and surrounding areas. We monitor our own performance and the performance of our suppliers and

customers.

Marketplace

• We monitor customer complaints about products and services

• We monitor complaints about late payment of our supplier invoices

• We monitor customer satisfaction levels

Environment

• Zero to land�ll• We monitor our overall energy consumption• We use FSC approved for all marketing materials• Use of recycled materials where possible• All of our quantity of cardboard is recycled each

year• Monitor the environmental impact over our supply

chain

Cardboard

High and low density cardboard

is bailed ready to be collected

and recycled into new cardboard/

packaging by a registered waste

management company.

Plastic

Plastics and other dry mixed

recyclables are held in dedicated

containers to be recycled by a

registered waste management

company.

Community

• Products given as goodwill to schools in the local area as well as charity donations

• One of the largest local employers (over 80% of staff are from Rotherham)

• We run student and college placements• We employ staff from Remploy as we believe in

helping to support disabled jobseekers

Workplace

• Low staff turnover• Value training and development provided to staff • Pay conditions compared to the local community • Workforce pro�le for gender, race, disability, age

compared to the local economy

Corporate responsibility

Ab

ou

t Us

14 www.cmd-ltd.com

72% of our suppliers are UK based companies

Having been established in Britain back in 1984, CMD have continued where possible, to source local materials and expertise. Our foundations are important to us, as we believe in the bene�ts and traditions of British manufacturing. As we manufacture domestically we do not rely on imports, thus improving our turn around times. Even though British manufacturing is perceived to be higher costing, CMD strive to ensure prices remain competitive and in line with the industry without sacri�cing on quality.

Only 12% of our purchasing goes outside the

EU

16% of our suppliers are EU based companies

imports Global

Ab

ou

t U

s

15sales line: +44 (0)1709 829511

From great design and quality manufacturing, to ef�cient delivery.

In 2012 we invested in our infrastructure and consolidated all our manufacturing and warehousing

into Rotherham. This move has seen innovative technology and advanced machinery playing a

much larger part of our processes, allowing us to deliver a more enhanced and ef�cient service

to our customers.

Investment

With a workforce of over 160 employees in production, CMD are well catered to handle small

to very large orders. Not only the size, but the wealth of experience in the team ensures that the

manufacturing process runs smoothly while quality levels are maintained. All our products are

tested ‘in-house’, meaning the customer can be sure they are receiving the very best, �rst time.

Experienced

Being able to manufacture on site gives us an advantage over similar businesses in the industry

as it allows us to be more involved with our customers’ solutions. Any speci�c requirements can

be tailored on site and the manufacturing process amended to incorporate customer focused

solutions. Warehousing on site also means we are unaffected by events abroad and can control

the delivery times to our customers.

Flexible

British manufacturing

Search cmdltd:

Ab

ou

t Us

16 www.cmd-ltd.com

manufacturing British

Ab

ou

t U

s

17sales line: +44 (0)1709 829511

Customer survey

Here’s what our customers had to say!

“I have been using your company for well over 20 years, originally Form Fittings and now CMD and in all this time I have found the sales team and of�ce staff helpful, polite and will stop at nothing to get the order to me ASAP. Thank you for an excellent service.”

said our prices are competitive.

95% 99%will purchase from us in the future.

Our staff.Our customers were asked to rate our staff on availability, product knowledge, technical knowledge, order support and post delivery support. The overall score was 4.3/5.

Worst in industry Best in industry

August 2013

Ab

ou

t Us

18 www.cmd-ltd.com

survey Customer

Website navigation.

Easy

Very Easy

Average

Dif�cult

Very Dif�cult

Our products.Our customers were asked to rate our products on quality, design, packaging, solutions and functionality. The overall score was 4.3/5.

About our catalogue.

Agree Neither DisagreeAll information is available

“Customer service team is extremely ef�cient when placing orders with them, order con�rmation is turned around extremely quickly and the lead times are extremely competitive. Issues have been dealt with quickly resulting in an overall highly positive experience of ordering from CMD.”

Worst in industry Best in industry

Ab

ou

t U

s

19sales line: +44 (0)1709 829511

Project: Lancaster Circus, BirminghamContractor: J.T. Hawkes (Electrical Contractors) Ltd

The £23m refurbishment of 1 Lancaster Circus by Wates Construction allowed for the council building to increase employee occupancy from 800 to 2,000. The �ve-storey building remained in use throughout the construction programme and with some clever project management working staff were decanted from �oor to �oor as work was carried out to avoid any impact upon ef�ciency.

Did you know?

The 1 Lancaster Circus project was undertaken as part of Birmingham City Council’s Working for the Future programme, one of nine Business Transformation programmes being delivered in partnership with Service Birmingham. The programme is to transform the council’s property portfolio to deliver ef�cient, �exible and �t for purpose workplaces.

CMD worked closely with J.T. Hawkes on the project to deliver the power distribution and lighting control needs across all the �ve storeys of commercial of�ce space;

• Hundreds of metres of Betatrak under�oor busbar clean earth were laid along with easy access �oor boxes providing power & data needs in none parimeter locations for ease and convenience for of�ce workers

• 127mm cleaners hives for dedicated power outlets, conveniently located for vacuuming • Mixture of Canis lighting control boxes with pre-fabricated master distribution boxes were used in conjunction

with PIR sensors to ensure the ef�ciency of the lighting ensuring only occupied rooms were lit

Case Study lancaster circus

Case Stu

dies

20 www.cmd-ltd.com

Project: Trafford Town Hall RefurbishmentContractor: Shepherd Construction

The £29m refurbishment of the Trafford Town Hall Grade II listed property situated on Talbot Road has now been completed. The original part of the 1930s building has been restored while a 1980s extension has been demolished to make way for a modern building, this is one of the borough’s most iconic buildings so now the community and not just the council can use and bene�t from the space. The revamp designed was created by 5 Plus Architects.

The redevelopment now provides this new of�ce space with an associated public customer service facility, training and conference facilities and a new restaurant and cafe for of�ce and community use.

CMD worked closely with Shepherd Construction on the power infrastructure part of the project to deliver the power distribution needs across the two storeys of commercial of�ce space.

Betatrak under�oor busbars were laid along with easy access �oor boxes, access grommets and slab boxes providing power & data needs in none parimeter locations for ease and convenience for of�ce workers.

Once the initial phase of work was completed, Senator International took the lead on the project supplying desking, seating and bespoke storage lockers in conjunction with Jenkinsons Of�ce Supplies, who are both very loyal and valuable customers of CMD. We supplied 1500 bespoke through desk PortHole modules, together with our elite under desk modules, starter cables & Cat6a patch leads.

trafford town hall Case Study

Cas

e St

ud

ies

21sales line: +44 (0)1709 829511

Case Study fresheyemarketing

Project: fresheyemarketingContractor: n/a

fresheyemarketing is one of the UK’s most successful virtual marketing companies and recently launched their �rst of�ce and talent centre at ElectricWorks, Shef�eld’s state of the art contemporary of�ce space for creative, digital and media businesses.

The team at fresheyemarketing have made perfect use of their new of�ce space, creating a modern and colourful environment that complements their brand. Like so many other employers, they also value the well-being of individual team members and decided to approach CMD to help �nd a �at screen monitor arm that would complete their new of�ce.

After the initial call to CMD, and a short meeting with Nick Smith, Accounts Executive, we quickly identi�ed that our Motion pole monitor arm was the perfect solution to enhance their new of�ce.

Nick explains, ‘I’ve done business with Jenny Bell, Head of Marketing and Business Development at CMD, before and remembered how fantastic she made their range of monitor arms sound. So, when we decided to launch our of�ce in Shef�eld, to include a �at screen monitor arm, I decided to give them a ring and see if they could help.’ ‘The arms were simple to install and the fusion silver �nish matches perfectly with our new of�ce design. With so many features including a full 360 degree rotation that allows screen information to be shared with colleagues, we’ve already had some fantastic feedback from the team.’

Case Stu

dies

22 www.cmd-ltd.com

Project: BOBST Boardroom & Training RoomContractor: Of�zone

BOBST, the World’s leading supplier of machinery and services to packaging manufacturers in the folding carton, corrugated board and �exible material industries, recently underwent a £400,000 �t out of their training and meeting room facilities. With support from Of�zone, one of the UK’s leading of�ce furniture and refurbishment specialists, the aim was to create a functional, contemporary working environment to support employee development and showcase the business to external customers. Geoff Pike, Director at Of�zone, explains, ‘everyone is delighted with the of�ce makeover, which includes the Horizon in desk modules from CMD, providing power and data where it is needed most, whilst enhancing the clean looks of the desk space’. The Horizon in desk module can be supplied with a choice of power and data; �tting �ush into the desk when not in use and rotating and locking proud of the desk when in use, making it the ideal solution for boardrooms and training facilities. Of�zone have established an excellent working relationship with CMD, making the process of choosing the right power and data modules as quick and simple as possible. Tim Shirt, Account Manager at CMD says, ‘through close consultation with Of�zone and BOBST we have developed a bespoke power, data and AV multimedia solution to meet and exceed the client’s expectations.’

BOBST boardroom Case Study

Cas

e St

ud

ies

23sales line: +44 (0)1709 829511

Case Study the cube

Project: The Cube, Birmingham Contractor: J.T. Hawkes (Electrical Contractors) Ltd

Every city needs an iconic building and Birmingham is no different in this mission. Just take a look at The Cube, a piece of architecture that tries to rede�ne the city as a paradigm of urban renewal and cutting-edge design. It’s a statement piece re�ecting a city keen to erase the stigma of industrial decline and sixties town planning that left it better known for its motorway junctions than its architecture.

Above the four retail levels, there are �ve storeys of commercial of�ce space, half of which have already been leased by the Highways Agency. The Cube’s 244 private-sale residential units are stacked on the nine �oors above the of�ces, many of which are duplex apartments offering double-height spaces and generous outside terraces. A boutique hotel is located on the �oor above these while the uppermost crown level will contain a public, panoramic sky-level bar and restaurant. Unlike many of the commercial schemes that make the claim, the Cube is a truly mixed-use development.

CMD worked closely with J.T. Hawkes in the power infrastructure part of the project.

• Hundreds of metres of Betatrak under�oor busbar clean earth were laid along with easy access �oor boxes providing power & data needs in none parimeter locations for ease and convenience for of�ce workers

• 127mm cleaners hives for dedicated power outlets, conveniently located for vacuuming • Mixture of Canis lighting control boxes with pre-fabricated master distribution boxes were used in conjunction

with PIR sensors to ensure the ef�ciency of the lighting ensuring only occupied rooms are lit

Case Stu

dies

24 www.cmd-ltd.com

Monitor ArmsCPU SupportsCable ManagementAccessories

Ergonomics top of the list

Requiredadjustment

Keyboardheight

Screenheight

Keyboardheight

Seatheight

Screenheight

10o - 20o

monitor tilt

10o - 20o

monitor tilt

20”- 30” (50-75cm)to screen

20”- 30” (50-75cm)to screen

When the time comes to invest in new of�ce furniture you have the perfect opportunity to revamp your of�ce ergonomics. If your team members complain about aches and pains the problem could be their desk set up. Four out of �ve adults will suffer from back pain at some point in their lives and this can result in them needing to have time off work which can cost your company money. Back pain is only one of the health issues that poor ergonomics can cause. The health of your team should be paramount and making your employees comfortable and healthier could be as simple as improving ergonomics in the workplace. This is where we come in. We understand how to reduce or prevent RSI by using our unrivalled experience to design ergonomically successful products.

Some key facts about this increasingly common complaint:

• The total number of MSD cases in 2011/12 was 439,000 out of a total 1,073,000 for all work-related illnesses.

• The main work activities attributed by respondents as causing their musculoskeletal disorder, or making it worse, was manual handling, awkward or tiring positions and keyboard work.

Source: HSE.gov.uk

26 www.cmd-ltd.com

fitting your arms Fixing Kits

C clamp

80mm Grommet

Bolt Through

Wall Mount

Slatwall

This �xing method is the perfect solution for when you do not want to drill a hole into your desk/working surface to which you are mounting the monitor arm. The C clamp can be adjusted to �t a variety of desk thicknesses and secured into position.

A bolt through �xing method does require a drilled hole to be made into the desk/work surface yet this �xing method is ideal when you want a permanent mounting solution for your monitor screen any where on the desk/work surface.

Typically of�ce desks have a 80mm grommet hole cut into them at each top corner in order to facilitate cable management for PCs/equipment on the desk. The 80mm grommet �xing can be quickly installed in the grommet hole, allowing the monitor arm to be �xed securely into position.

Slatwalls or tool rails are typically used to create a divide between bench desking systems and to make the most of the workspace by lifting all equipment onto the slatwall from paper trays to monitor screens to power sockets. This is ideal for when workspace is at a premium. The single slatwall mount has a universal �xing designed to work with most tool rail / slatwall solutions to which allows the monitor arm to be inserted into the �xing.

The wall mount bracket allows close �xing to the wall and is ideal for when you require your monitor to be �xed to your wall as a permanent solution. You do need to make sure that your wall is capable of carrying the weight of the mount and monitor arm.

Our wide choice of brackets and �xing methods provide a secure, ergonomic and convenient way of mounting your �at screen to the wall or desk. Users now realise the importance of moving the monitor to ensure the most ergonomic viewing angle, and with a securely �tted monitor arm you can easily reposition it after changing posture at your desk, chair or even from standing. So choose from a selection of �xing methods to maximise your workspace.

27sales line: +44 (0)1709 829511

Zgo™ monitor arm

New

Latest internal spring technology

Concealed cablemanagement

A choice of six coloured snap on covers sold

separately

Quick release head

180° rotation with locking mechanism to prevent contact with

privacy screens

Zgo™ is a new class of monitor arm. With contemporary styling, a unique internal management system and interchangeable snap in cover, it is the perfect solution for any modern of�ce environment. It has been designed with simple installation and features a tool-less spring tension indicator gauge, quick release head and a hand tightening �xing kit.

USB data hub

Laptop holder

Note: The Zgo arm is not included with the USB data hub and laptop holder.

Spring tensionindicator gauge

Mo

nito

r Arm

s

28 www.cmd-ltd.com

C clamp

60m

m

103m

m

150m

m

monitor arm Zgo™

Blue

Orange

Green

Red

Grey

The Zgo™ arm is the only monitor arm to offer a vibrant colour palette of interchangeable snap in covers for fun, fashion and impact in the workplace.

Code Colour Description MRP

68ZG01 SilverZgo™ monitor arm, quick release head and C clamp fixing kit

£175.00

68ZG13 Blue Coloured insert (4 per pack) £5.00

68ZG14 Orange Coloured insert (4 per pack) £5.00

68ZG15 Green Coloured insert (4 per pack) £5.00

68ZG16 Red Coloured insert (4 per pack) £5.00

68ZG17 Grey Coloured insert (4 per pack) £5.00

68ZG18 White Coloured insert (4 per pack) £5.00

put the fun back into your office..


68ZG02 Silver USB data hub (4x USB) £53.00

68ZG03 Silver Laptop holder £106.25

252743 Silver Twin screen holder (See page 37) £118.32

68ZG05 Silver Through desk mount £14.75

• Maximum monitor weight: 9kg• Arm reach: 634mm• Vertical adjustment: 296mm• VESA 75mm and 100mm compliant• Concealed cable management• Provides 360° rotation• Optional 180° lock out feature to protect walls and

screens• Monitor easily rotates from portrait to landscape

orientations

• Quick release monitor detachment for fast replacement

• Quick release mounting assembly for easy transition from screen to laptop holder

• Fixing options: Zgo comes complete with a C clamp �xing kit but a through desk �xing kit is also available

• Desk thickness range: 18mm to 60mm• A choice of six coloured snap on covers sold

separately• Comprising 29% recycling and 99% recyclable

content

Mo

nit

or

Arm

s

29sales line: +44 (0)1709 829511

Air flat screen arm

Gas strut supports upto 8kg monitors

Cable management

Optional C clamp or Bolt Through �xing kit

Quick release head

VESA compliant 75mm and 100mm

Lock at speci�c angles

Gas assisted �ngertip movement

• An integral gas strut counterbalances the weight of the screen allowing �ngertip adjustment to the desired working position

• The arm mechanism ensures the screen remains vertical throughout any adjustment

• The arm can fold �at into 80mm of space• The tilt and rotate head features a quick-release

mechanism with a locking feature as standard, permitting quick and easy monitor detachment

• Arms are supplied with an industry-standard VESA 75 / 100 adaptor plate for attachment of monitors

• The arm is supplied with cable management clips

Mo

nito

r Arm

s

30 www.cmd-ltd.com

Air has been designed with the environment in mind, built and made in Shef�eld, the home of UK manufacturing. Air projects a clean and slimline exterior where functionality is prevalent yet style is not forgotten. It provides optimum performance expected from a gas assisted monitor arm using locally designed and sourced parts. Air has the range of articulation of our award winning Cygnus® arm enabling your screen to be set up according to the requirements of your working environment. Gas assistance allows the arm to move freely and effortlessly across the desk, positioning your screen to your natural position.

flat screen arm Air

BlackSilver

breathe life into your office..

air

White


80K661 SilverAir monitor arm with C clamp fixing kit

£163.75

80K662 BlackAir monitor arm with C clamp fixing kit

£163.75

80K663 WhiteAir monitor arm with C clamp fixing kit

£163.75

80K664 SilverAir monitor arm with Bolt Through fixing kit

£163.75

80K665 BlackAir monitor arm with Bolt Through fixing kit

£163.75

80K666 WhiteAir monitor arm with Bolt Through fixing kit

£163.75

Slatwall options are available on request, please call the Sales Of�ce.

C clamp

50m

m

78.5

mm

143m

m

Mo

nit

or

Arm

s

31sales line: +44 (0)1709 829511

Motion flat screen arm

Arm supports up to 8kg monitors

Cable management

Optional C clamp orBolt Through �xing kit

Quick release head


Height adjustment

• Common styling with Air monitor arm• Minimal design, with linear styling• Folds back �ush to screen or desk back

edge• Button release lift and lower mechanism• Supplied with standard VESA 75 or 100

plate for screen �xing• Quick release VESA plate �xing as standard• VESA plate screen lock security mechanism• Available in single or double con�gurations• 35mm diameter pole

Mo

nito

r Arm

s

32 www.cmd-ltd.com

Motion is the ever practical pole arm that offers the ergonomic bene�ts of a monitor arm yet more affordable than its more prestigious Air gas sibling.

Motion does share common styling with Air ensuring the aesthetics are not comprised when the arms share the same �oor space.

Motion is available in a single and double arm con�guration making it ideal for those who work in close proximity, or for the individual user who has two screens. It can also be selected with a monitor head that is ideal for reception areas and point of sale locations.

flat screen arm Motion

stability when it’s needed most..

motion


80K655 SilverMotion monitor arm with C clamp fixing kit

£137.55

80K656 BlackMotion monitor arm with C clamp fixing kit

£137.55

80K657 WhiteMotion monitor arm with C clamp fixing kit

£137.55

80K658 SilverMotion monitor arm with Bolt Through fixing kit

£137.55

80K659 BlackMotion monitor arm with Bolt Through fixing kit

£137.55

80K660 WhiteMotion monitor arm with Bolt Through fixing kit

£137.55

BlackSilver White

Slatwall options are available on request, please call the Sales Of�ce.

C clamp

50m

m

78.5

mm

143m

m

Mo

nit

or

Arm

s

33sales line: +44 (0)1709 829511

C clamp �xing kitor Bolt Through �xing kit

Height Adjustment

Double Motion flat screen arm

Double Motion is ideal for when you need two screens mounted at the same height to achieve the perfect ergonomic setup.


80K667 Silver Double Motion monitor arm with C clamp fixing kit £235.80

80K668 Black Double Motion monitor arm with C clamp fixing kit £235.80

80K669 White Double Motion monitor arm with C clamp fixing kit £235.80

80K670 Silver Double Motion monitor arm with Bolt Through fixing kit £235.80

80K671 Black Double Motion monitor arm with Bolt Through fixing kit £235.80

80K672 White Double Motion monitor arm with Bolt Through fixing kit £235.80

BlackSilver White

Quick release head

Supports up to 8kg monitors

Mo

nito

r Arm

s

34 www.cmd-ltd.com

Single Motion head

400mm pole MotionThe Motion 400mm pole removes the extending arm for environments where it’s not suitable, and simply the pole and head will suf�ce. This is perfect for spaces where �xed screens are required and height adjustment is still needed.

Bolt through�xing kits

available uponrequest

Twin Motion Head

Suitable for receptions,

check in, retail, touch

screens, trade desks.

Height adjustableCable management

Note: other pole lengths are available on request.


80K673 Silver Single Motion head monitor arm with C clamp fixing kit £104.80

80K674 Black Single Motion head monitor arm with C clamp fixing kit £104.80

80K675 White Single Motion head monitor arm with C clamp fixing kit £104.80

80K676 Silver Twin Motion head monitor arm with C clamp fixing kit £131.00

80K677 Black Twin Motion head monitor arm with C clamp fixing kit £131.00

80K678 White Twin Motion head monitor arm with C clamp fixing kit £131.00

Other pole lengths available on request

Mo

nit

or

Arm

s

35sales line: +44 (0)1709 829511

Mountingkit

included

Cygnus® is our award winning gas lift �at screen monitor arm featuring a unique blend of innovative engineering and contemporary styling. It offers all the bene�ts you would expect of a premium adjustable gas lift arm with the added bene�t of an extensive range of useful features to further enhance its function making life in a busy working of�ce more comfortable and aesthetically pleasing. Cygnus® is available in a range of colour options with a choice of gas struts for when you need a more heavy duty arm.

Cygnus® flat screen arm

Arm supports up to 10kg or 14kg

(two gas struts available)

Integrated cable management

Quick release head


• An integral gas strut counterbalances the weight of the screen allowing �ngertip adjustment to the desired working position

• The arm mechanism ensures the screen remains vertical throughout any adjustment

• The dual-position forearm can be set at 15 degree or 45 degree positions to extend the operational range of the arm giving a maximum height of 523mm and a maximum reach of 476mm to the centre of the VESA plate.

• The arm can fold �at into 80mm of space• The tilt and rotate head features a quick-release

mechanism with a locking feature as standard, permitting quick and easy monitor detachment

• Arms are supplied with an industry-standard VESA 75 / 100 adaptor plate for attachment of monitors

• The arm features an integral cable management system • Includes C clamp and Bolt Through �xing kit• Product weight 5kg

to move..

freedom

C clamp

43m

m

98.5

mm

40mm

Mo

nito

r Arm

s

36 www.cmd-ltd.com

flat screen arm Cygnus®

Universal Slatwall Monitor Arm Bracket

This universal slatwall bracket allows the Cygnus® arm to be �xed to a slatwall partition. Ideal for when desk space is at a premium as it removes any requirement for any �xing on the desk.

80mm Grommet Mount for Cygnus® arm

To �t a 80mm desk grommet as an alternative �xing option to Bolt Through or C clamp �xing kits.

Cygnus® mounting options:

Razor Mount - For whenyou need two screens

Double head mount designed to hold two screens on one Cygnus® arm must be used in conjunction with 80K152, 68F121 & 68F143. Monitor weight should not be more than 6kg each.

BlackSilver White


68F017 Silver Cygnus® gas lift arm with C clamp and Bolt Through fixing kits. Holds screen weights 3-10kg £240.65

68F120 Black Cygnus® gas lift arm with C clamp and Bolt Through fixing kits. Holds screen weights 3-10kg £240.65

68F031 White Cygnus® gas lift arm with C clamp and Bolt Through fixing kits. Holds screen weights 3-10kg £240.65

80K152 Silver Cygnus® gas lift arm with C clamp and Bolt Through fixing kits. Holds screen weights 8-14kg £240.65

68F121 Black Cygnus® gas lift arm with C clamp and Bolt Through fixing kits. Holds screen weights 8-14kg £240.65

68F143 White Cygnus® gas lift arm with C clamp and Bolt Through fixing kits. Holds screen weights 8-14kg £240.65

252743 Silver Razor mount. Holds screen weight of 6kg each side. Arm not included (New) £118.32

252744 Black Razor mount. Holds screen weight of 6kg each side. Arm not included (New) £118.32

252745 White Razor mount. Holds screen weight of 6kg each side. Arm not included (New) £118.32

440324 Silver 80mm grommet mount for Cygnus®. Arm not included £47.89

440326 Black 80mm grommet mount for Cygnus®. Arm not included £47.89

440325 White 80mm grommet mount for Cygnus®. Arm not included £47.89

440269 Silver Universal slatwall bracket for Cygnus®. Arm not included £42.26

440506 Black Universal slatwall bracket for Cygnus®. Arm not included £42.26

440380 White Universal slatwall bracket for Cygnus®. Arm not included £42.26

New Mo

nit

or

Arm

s

37sales line: +44 (0)1709 829511

45.5mm

62m

m

C clamp

Vision flat screen arm

Vision is a design classic of monitor arm which offers the ergonomic benefits of a flat screen monitor arm yet more affordable than its more prestigious gas lift rivals. Vision can be installed at different heights to suit different environments with rotation and height adjustments being made by the individual users. The 38mm diameter pole allows a huge 330mm of height adjustment, while the design also allows a full 360 degrees of swivel movement with full head tilt to be positioned at the optimum eye level.


Arm supports monitors up to 8kg

Height adjustment

choose a kit

Cable management

• Each single arm can support monitors up to 8kg

• The maximum extension of each single arm is 460mm, when measured from the centre of the Vision pole to the centre of the VESA mount

• The monitor can be attached using the VESA compliant mount (75mm and 100mm)

• Cable management clips are supplied and can be attached to the arm as required

• Available in silver, black and white (Note: Our slatwall and wall mounted systems are only available in silver)

460mm maximum extension

88m

m

177m

m

400mm Pole

Mo

nito

r Arm

s

38 www.cmd-ltd.com

flat screen arm Vision

Single Arm

Double Arm

Triple Arm


68S002 Silver

Single Vision pole arm with

C clamp, Bolt Through, and

80mm Grommet fixing kit.

With black plastic trim

£113.81

68S020 Black





£113.81

68S028 White




With white plastic trim

£113.81

Single Arm


68S005 Silver

Double Vision pole arm with C clamp, Bolt Through, and 80mm Grommet fixing kit.


£211.28

68S031 Black



£211.28

68S018 White



£211.28

Double Arm


68S078 Silver

Triple Vision pole arm with




£268.96

68S099 Black





£268.96

68S100 White





£268.96

Triple Arm

Our Double Vision kit allows for two screens to be mounted at the same height and adjusted as required. Each VESA head supports monitors up to 8kg.

Our Triple Vision Kit allows for three screens up to 17” to be mounted at the same height and adjusted as required. Each VESA head supports monitors up to 8kg.

Our Single Vision kit allows for a single screen to be mounted and adjusted as required. Arm supports monitors up to 8kg.

Mo

nit

or

Arm

s

39sales line: +44 (0)1709 829511

Our 4 screen Vision kit allows for four screens to be mounted at the same height and adjusted as required. Each arm supports monitors up to 8kg.

Vision flat screen arm

4 screen system


68S093 Silver

4 screen Vision pole arm with




£322.56

68S094 Black





£322.56

68S095 White





£322.56

4 screen system


68S096 Silver





£410.62

68S097 Black





£410.62

68S098 White





£410.62

6 screen system

Our 6 screen Vision Kit allows for six screens up to 17” to be mounted at the same height and adjusted as required. Each arm supports monitors up to 8kg.

6 screen system


68S024 Silver


slatwall mounting and black

plastic trim

£113.81

Slatwall system


68S004 Silver


wall mounting kit and black

plastic trim

£113.81

Wall mounted system

New

New

Slatwall system

Wall mount system

Arm supports monitors up to 8kg.

Arm supports monitors up to 8kg.

Mo

nito

r Arm

s

40 www.cmd-ltd.com

accessories Vision

choose an accessory

Used in conjunction with the Vision pole arm the laptop holder can be positioned to the side or rotated around the pole and height can be adjusted with a simple release mechanism.

• Laptop holder will hold up to 8kg• Tray features a non-slip surface with adjustable

platforms for wider laptops• 360o rotation around the Vision pole arm• 330mm height adjustment range• 90o pan adjustment• 40o tilt adjustment range

Laptop support


50N001 SilverVision Laptop Support

with black lever £67.07

50N002 BlackVision Laptop Support


50N003 WhiteVision Laptop Support

with white lever £67.07

50N004 WhiteVision Laptop Support


Available with black or white lever

Vision pole issold separately

Arm supports up to 8kg

Non-slipsurface

Mo

nit

or

Arm

s

41sales line: +44 (0)1709 829511

Vision accessories


58R018 Silver Vision Thin Client Holder £71.43

58R016 Black Vision Thin Client Holder £71.43

58R017 White Vision Thin Client Holder £71.43

Used in conjunction with the Vision pole arm the thin client holder can support a variety of thin client sizes. The Vision pole arm can be supplied with an extended C clamp base if needed to allow the holder to be used with desk privacy screens - please ask for details.

Designed to support thin clients with a minimum height of 150mm, a maximum height of 235mm, maximum width of 300mm and maximum depth of 60mm.

Thin client holder

50mm

70m

m85

mm

150m

m

235m

m

Dimensions

Vision Pole Arm(purchased separately)

Adjustable Base Plate

Extended C clamp base for use with privacy screens.

(available on request)

New

• Easy Fixing - Can be fitted to your existing Vision pole monitor arm or bought together for new installations.

• Strong Construction - Constructed from 2mm powder coated steel making this an affordable and robust solution for thin client users.

• Versatility - The Vision thin client holder is fully adjustable and can accommodate a wide range of thin client sizes.

Note: The Vision arm is not included with the Vision thin client holder.

Mo

nito

r Arm

s

42 www.cmd-ltd.com

VESA compatible �xing holes

(75mm/100mm)

Gravity hook

Strong 2mm painted metal construction

Quick �tting securing lever

Stability brackets

accessories Vision

Quick release VESA


68S071 Silver Vision Quick Release VESA £14.97

68S101 Black Vision Quick Release VESA £14.97

68S102 White Vision Quick Release VESA £14.97

New


68S059 Silver 400mm Pole with C clamp, Bolt Through, and 80mm Grommet fixing kit with black cap £64.00

68S060 Black 400mm Pole with C clamp, Bolt Through, and 80mm Grommet fixing kit with black cap £64.00

68S061 White 400mm Pole with C clamp, Bolt Through, and 80mm Grommet fixing kit with black cap £64.00

68S062 White 400mm Pole with C clamp, Bolt Through, and 80mm Grommet fixing kit with white cap £64.00

68S085 Silver 750mm Pole with C clamp, Bolt Through, and 80mm Grommet fixing kit with black cap £102.40

68S086 Black 750mm Pole with C clamp, Bolt Through, and 80mm Grommet fixing kit with black cap £102.40

68S087 White 750mm Pole with C clamp, Bolt Through, and 80mm Grommet fixing kit with white cap £102.40


68S067 Silver Single Head £57.68

68S088 Black Single Head £57.68

68S089 White Single Head £57.68

Vision poles

Single head

Mo

nit

or

Arm

s

43sales line: +44 (0)1709 829511

Unite™ tablet mount

Carbon fibre universal mount for tablets..

Unite

New

Unite Clamp Mount 68J001C clamp desk mounting

for quick installation

Finger tightening mechanism for adjusting

the mount’s position

Lightweight carbon �bre sections

5 point �xing system to support tablets

from 7” - 10”

These award-winning mounts are now available from CMD and are the perfect mounting solutions for any 7”-10” tablet displaying it at the perfect angle for utmost convenience.

The clamp attaches to the widest variety of surfaces (10-40mm), round or �at. Its single carbon �bre arm is perfect for whenever you need to keep your tablet nearby, but not in your hands.

And with more and more people using tablets as business tools, Unite provides a hands-free solution that increases ef�ciency and positions the tablet at the optimum ergonomic height and angle for safe and stress free use.

Omni-directionalball joints

Tablet M

ou

nts

44 www.cmd-ltd.com

iPad mount MagConnect™


68J001 Black Unite™ Universal Carbon Fibre Single Section Clamp Mount for Tablets £79.95

68J002 Black Unite™ Universal Carbon Fibre Double Section C clamp Mount for Tablets £129.95

68J003 Black Unite™ Universal Carbon Fibre Wall/Cabinet Mount for Tablets £89.95

68J004 Black MagConnect™ Technology, Clamp Single Section Mount for iPad 4th/3rd/2nd Generation £89.95

68J005 Black MagConnect™ Technology, Double Section C clamp Mount for iPad 4th/3rd/2nd Generation £149.95

68J006 Black MagConnect™ Technology, Wall/Cabinet Double Section Mount for iPad 4th/3rd/2nd Generation £99.95

Unite Wall/Cabinet Mount 68J003

Lightweight Strength Unite and Magconnect mounts are built of high-quality carbon �bre. This advanced material is surprisingly lightweight yet incredibly strong. The powerful combination of carbon �bre with carefully designed joints produces mounts that are both easy to manoeuvre and sturdy to use.

Omni-directional Ball Joint Unite and Magconnect mounts come equipped with omni-directional ball joints for ultimate customisability. The tablet/ iPad holder can be swivelled 360° to easily transition from portrait to landscape mode without removing it from the mount. And the sturdy carbon �bre arms can also be adjusted into in�nite con�gurations providing you with the perfect angle every time.

MagConnect

MagConnect™ C clamp Mount 68J004

Technology for an easy, secure connection every time for tablets.MagConnect™ is the next step in the evolution of mobile mounts and includes a locking mechanism to provide the perfect mounting solution.

The technology is advanced but simple to use; First, the iPad is secured into a hard-shell case equipped with a powerful magnet. When the case is attached to a compatible product, another magnet instantly interlocks your MagConnect™ shell with a receiver, while a precision screw tightens for a secure �t.

Tab

let

Mo

un

ts

45sales line: +44 (0)1709 829511

Snug cpu support

Snug is a simple and stylish CPU support that enhances the aesthetics of any workspace environment. Allows easy access to front and back of CPU.

Variable height adjustment

Smart aesthetic cover• Slim and stylish design• Simple to install• Available in various colours• ABS fascia cover �ts on to metal structure giving

a smart aesthetic look• Extender plate included as standard for wider

CPU’s• CPU sits on a metal platform and is secured in

place with a strap• CPU dimensions range:

275mm - 420mm (H) x 96mm - 190mm (W) • Load tested by FIRA• Supports CPU weights up to 10kg - subject to

desk material• Product weight 3.44kg

LOAD TESTED

Optional Slide and Rotate allows movement of the CPU holder for Snug and Ladder.

Slide mechanism requires a minimum desk width of 700mm (Track length 407mm).


58A109 Black Body with Metallic Silver Frame Snug Adjustable CPU Support £54.89

58A122 White Body with Metallic Silver Frame Snug Adjustable CPU Support £54.89

58A162 Grey Body with Metallic Silver Frame Snug Adjustable CPU Support £54.89

58A049 Black and Silver Slide and Rotate Mechanism £38.04

CPU

Sup

po

rts

46 www.cmd-ltd.com

cpu support EncloseDesigned to enhance any of�ce environment with its modern aesthetics and compact features, the Enclose CPU holder is simple to install and a robust solution for keeping the CPU out of the way and free from damage. Poised under the desk, Enclose improves the CPU performance by facilitating improved ventilation promoting a longer life for CPUs by allowing hardware to stay cool and vent freely, as well as removing CPUs off the �oor where dust accumulates and valuable computer equipment could be kicked or damaged by a vacuum cleaner. Made from high quality aluminium for improved lifetime longevity, simple handle adjustment for either height or width exact �tting & a full 360 degrees slide and rotation feature, makes Enclose the only choice for your next CPU holder.

Spring loaded aluminium body clamps the CPU

securely in place

Slide & 360o Rotation

Adjustable bracket supports CPUs

of different widths

Code Description MRP

58R011 Enclose CPU Support £90.15

• CPU dimensions range: 280mm - 380mm (H) x 55mm - 125mm (W)

• Supports CPU weights up to 8kg - subject to desk material

• High quality aluminium with simple handle adjustment

• Full 360o slide and rotate mechanism

Spin cpu supportCode Description MRP

58R010Spin CPU Holder. Complete with slide and rotate mechanism

£62.10

58R009

Lockable Spin CPU Holder. Complete with slide and rotate mechanism. 2 sets of keys included

£85.73

Spin CPU Support

• Adjustable support platform to accommodate extensive CPU sizes • Max dimensions: 380mm - 580mm (H) x 50mm - 275mm (W)• Supports CPU weights up to 15kg - subject to desk material• Comes complete with a slide and rotate mechanism

Spin Lockable CPU Support

• Locking mechanism built for security, comes with 2 sets of keys• Slideable and 360o rotation• Max dimensions: 370mm - 570mm (H) x 110mm - 230mm (W)

x 295mm - 540mm (D)• Supports CPU weights up to 15kg - subject to desk material

The clamp can be adjustedto fit a variety of widths

Slideable & 360o Rotation

CPU

Su

pp

ort

s

47sales line: +44 (0)1709 829511

• Adjustable support platform to accommodate different CPU sizes and mounting heights

• A strap secures the CPU, permitting easy removal for servicing or replacement

• Mounting bracket screws directly into the underside of the work surface

• Optional slide and rotate mechanism• Can be adapted to fit to beam based

furniture if required• Max dimensions:

500mm (H) x 130mm (W)• Supports CPU weights up to 15kg,

subject to desk material

Ladder is a stylish and functional solution for CPUs with its steel frame it supports the CPU together with the strong nylon strap used to secure the CPU in position.

Single Ladder

Optional Slide and Rotate allows movement of the CPU holder for Snug and Ladder.

Slide mechanism requires a minimum desk width of 700mm (Track length 407mm).

Double Ladder Double Ladder • Double Ladder supports 2 CPUs side by

side

Ladder cpu support


58A192 Silver Ladder CPU Holder with Strap £115.36

58A193 White Ladder CPU Holder with Strap £115.36

58A194 Silver Double Ladder CPU Holder with Strap £158.39

58A195 White Double Ladder CPU Holder with Strap £158.39

58A049 Black/Silver Slide and Rotate Mechanism £38.04

Rainbow CPU TrolleyRainbow CPU TrolleyRainbow CPU Trolley

code: 58A190


58A190 Silver Rainbow CPU Trolley £78.10

CPU

Sup

po

rts

48 www.cmd-ltd.com

cable spine Spiral

This unique desk to floor cable management spine offers exceptionally quick and easy installation, plus a large cable carrying capacity and a good aesthetic appearance.

SilverBlack White (New)

Code Colour MRP

660132 Black £42.44

660133 White (New) £42.44

660130 Silver £42.44

Cable exit

Spring like expansion from 150mm to 1300mm

Large capacity to accommodate a number of

different sized cables

Simple install by single screw into desktop

Weighted horseshoe

Cable exit29mm (H) x 50mm (W)

Fits 25mm conduit

Diameter 69mm

Nowavailable in white

CPU

Su

pp

ort

s

49sales line: +44 (0)1709 829511

This innovative fabric design deals with the everyday problem of cable management with a simple and flexible solution that fits a wide range of desk systems.

Tidy is extremely versatile, lightweight and easy to install. The zip and segregation channels allow all power and data cabling to be concealed yet segregated, whilst the fabric hook and loop fixing straps allow you to cater for a range of desk heights.

Tidy™ cable management

• Adjustable height from 690mm to 790mm to cater for different desk heights

• Each unit is made from a high quality fabric, which gives it fabulous strength and �exibility

• Available in black, white and grey• Product weight 500g

Note: The desk �xing bracket and weighted foot are coloured to match the product.

Different coloured zips are available subject to a minimum order quantity.


650777 Black690mm to 790mm with orange zip

£49.95

650778 White690mm to 790mmwith orange zip

£49.95

650779 Grey690mm to 790mmwith orange zip

£49.95

Desk �xing bracket

Internal segregation

Adjustable fabric hook and loop �xing straps

Zip opening

Adjustable Velcro �xing straps

Weighted foot

New

Weighted foot

Fixing bracket

Cab

le Man

agem

ent

50 www.cmd-ltd.com

cable spine CablewayAn attractive and practical method of cable containment. The Cableway routes cables from floor to desk and provides mechanical protection and strain relief.

Vertical Cableway

• Two compartments to allow for power and data cable segregation

• The Vertical Cableway screws to underside of the desk using a top bracket (Fixing kit included)

• Weighted base for free standing �oor to desk section

• The horizontal Cableway screw to the underside of the desk using clip-on �xing brackets (Fixing kit included)

• Internal channel allows 3 pole connectors through

• Allows conduit up to 25mm diameter to be swiped in

• Segments are detachable for easy re-con�guration


660181 WhiteVertical Cableway weighted base to desk including top bracket.(Approx height 780mm)

£26.62

660042 SilverVertical Cableway weighted base to desk including top bracket.(Approx height 780mm)

£26.62

660182 WhiteHorizontal Cableway. (Approx length 620mm)

£17.76

660050 SilverHorizontal Cableway. (Approx length 620mm)

£17.76

660183 WhiteExtended Cableway weighted base to desk including top bracket. (Approx length 1340mm)

£41.79

660046 SilverExtended Cableway weighted base to desk including top bracket.(Approx length 1340mm)

£41.79

Extended Cableway

Horizontal Cableway

(Vertical Cablewaynot included)

Under desk clip-on fixing bracket

25mmdiameter

28mm

Cable Section

Easy tore-con�gure

Power and data segregation

Weighted base


Cab

le M

anag

emen

t

51sales line: +44 (0)1709 829511

Cable eater

Cable Eater is the quick and easy solution for organising and streamlining your untidy cables. Suitable for home or workspace, using the insertion tool, a number of cables can be speedily zipped into the strong flexible casing. Commercial reels can be cut to length to suit the needs on site.


650101 Grey Cable Eater 30m & Zip Tool £91.22

Cable Eater can be cut with ease for anylength of usage

Hand tool supplied for quick and easy

installation

20mm diameter

Cab

le Man

agem

ent

52 www.cmd-ltd.com

Fusion is a high-capacity polypropylene coated wire cable management system. Fusion features a sloping side for easy access to cables and specially designed hook brackets to guarantee a simple and quick installation. Fusion can easily be attached to the underside of the desk or to the modesty panel.

cable basket Fusion Code Description MRP

650468800mm (actual length 766mm), includes x2 Brackets

£40.62

6504691000mm (actual length 994mm), in-cludes x2 Brackets

£42.12


£44.16


£45.71


£47.30

Silver low density polypropylene coated wire

Slanted front for cable and plug access

Silver RAL7040

Specially designed brackets to stop basket

being knocked out accidentally

Code MRP

251904 £5.80

Additionalbracket

Earthing point

Dimensions

100mm

104m

m

138mm

132m

m

Cab

le M

anag

emen

t

53sales line: +44 (0)1709 829511

* White Premium cable baskets are available on request, subject to lead times and a minimum order quantity. 2000mm lengths are available on request.

Premium cable basket

Premium is a simple cable containment basket which clips underneath the desk and routes power and data cables neatly under the desk surface. Basket width (150mm) and basket height (85mm).

Specially designedbrackets

Silver RAL7040 or White* RAL 9010 on request

Mild steel nyloncoated wire basket

Earthing point


650756 Silver Premium cable basket (1000mm), includes x2 Brackets £69.55

650757 White* Premium cable basket (1000mm), includes x2 Brackets £69.55









650128 Black Additional x1 Strap hinge bracket £5.23

112

mm

142mm

90m

m

Cab

le Man

agem

ent

54 www.cmd-ltd.com

65 Series Hi-tech Trunking • Solves the problem of untidy cabling• Three separate channels for power, voice and data segregation• Two piece swipe through T-shaped strips for addition or

removal of cables• Cutting service is available for non-standard lengths• Self-adhesive backing strip• Can be drilled and screw mounted• Colour Black

65 Series Flexible Cable Trunking • Simple means of keeping cables tidy• Suitable for use on furniture, control gear and enclosures• Available in three sizes• Supplied in 500mm lengths• Slip ring for quick addition or removal of cables• Self-adhesive backing strip• Colour White

63 Series Cable Clip • Handy clip providing a simple method of holding cables• Self-adhesive fixing• Colour Grey

63 Series Cable Clamp • Used to provide a secure cable fixing at the point of entry or

exit from furniture• Screws not provided

Code Length MRP

650007 1000mm £12.35

650013 1500mm £19.21

650016 2000mm £20.58

Code Diameter MRP

650033 20mm £7.70

650034 30mm £9.12

650035 40mm £10.49

Code Dimensions MRP

630001 25mm (W) x 30mm (H) £0.48

Code Dimensions MRP

630002 10mm (W) x 40mm (H) £0.81

cable management Accessories

40mm 30mm 20mm

Cab

le M

anag

emen

t

55sales line: +44 (0)1709 829511

80mm Metal Desk GrommetsA high quality cast aluminium desk grommet available in polished, brush nickel and matt chrome finish. Brush strip on cable entry port. The unit features a twist lock action to retain the lid. Easily retro fitted into an 80mm diameter hole. Minimum work surface thickness is 12mm.

80mm Plastic Desk GrommetsA high quality plastic desk grommet. Easily retro fitted into a 80mm diameter hole. Minimum work surface thickness is 22mm and has a removable slide that can be stored in a recess under the cover plate.

Accessories desk grommets

SilverWhite (New)Black


520168 Polished 80mm Desk Grommet £25.00

520169 Brushed Nickel 80mm Desk Grommet £25.00

520170 Matt Chrome 80mm Desk Grommet £25.00

Matt ChromeBrushed NickelPolished

80mm desk grommets

• Cover plate conceals all the cables below the desk top• Cover is removable to allow the introduction of cables with a fitted plug

47m

m

97m

m

80m

m

25mm

20mm

90m

m

80m

m

13.5mm

12mm

22m

m

75m

m

New


520001 Black 80mm Desk Grommet £5.47

520162 White 80mm Desk Grommet £5.47

520145 Silver 80mm Desk Grommet £9.60


Accesso

ries

56 www.cmd-ltd.com

On DeskIn DeskUnder DeskAccessories

BS6396: 2008 Electrical Systems in Of�ce Furniture & Educational Furniture

Electrical equipment and installations must be designed and tested to ensure their safety and to comply with statutory regulations, in particular the “Electricity at Work Regulations”. Relevant British Standards may be used as a means of demonstrating safety and compliance with the regulations. In the case of electrical systems in of�ce furniture and educational furniture, the relevant standard for systems connected to the mains supply by means of a 13A plug is BS 6396:2008.

Sockets installed in of�ce furniture are intended to supply of�ce equipment with a rating not exceeding 5A with BS 6396 referring to all of�ce furniture electrical installations when completed must be tested. Section 7 of BS 6396 sets out the procedures. These tests should also be carried out on recon�gured desks and screens as well as new installations. Periodic inspections and tests must be carried out to ful�l the requirements of BS 6396 and the “Electricity at Work Regulations” in maintaining a safe working environment.

The diagrams below indicate the maximum number of socket outlets that may be connected from a single powersupply cable fed from a 13 Amp BS 1363 plug and their relevant fuse ratings.

Electrical Safety it’s what we do

BS5733: 2010 General requirements for electrical accessories

BS 5733:2010 speci�es requirements and tests to check the safety in normal use of electrical accessories which are not covered by other speci�c British Standards. Such accessories are intended for use in household, commercial and light industrial premises where:

• The nominal supply voltage does not exceed 250 V a.c. single-phase, 50 Hz to 60 Hz or 250 V d.c.; • The rated current of the accessory does not exceed 63A.

Unless otherwise stated by the manufacturer, accessories conforming to this standard are intended for connection by cables or �exible cords conforming to BS 6004, BS 6007, BS 6500 or BS 7211. BS EN 61535: 2009

BS EN 61535: 2009 Installation couplers intended for permanent connection in �xed installations

This standard applies to two, three, four and �ve wire installation couplers including earth, (if provided), with a rated voltage up to and including 500V a.c. and a rated connecting capacity up to and including 10mm for permanent connection in indoor electrical installations. Installation couplers with additional contacts for voltages other than mains voltages are outside the scope of this standard.

All Products within our range which are intended for connection to the �xed wiring of the building, (such as our Betatrak® Under�oor Busbar System and Modular Lighting Systems), use components certi�ed to BS EN 61535.

Con�dence in CMD Products

At CMD our highly trained and experienced engineers are fully quali�ed in all aspects of compliance with BS6396:2008 and all of our products are manufactured to BS5733:1995 and where relevant to BS EN 61535:2009.

5 Amp 5 Amp

3.15 Amp 3.15 Amp 3.15 AmpPlug Fuse 13 Amp

Plug Fuse 13 Amp

58 www.cmd-ltd.com

build it your way Sockets

Build it your way Manage your energy

The customise me logo shows that socket variations can be con�gured to suit your individual needs.

The Footprint logo shows when a module can be con�gured for energy management.

USB Sockets CMD supply two different types of USB sockets; USB data and USB charging. Our USB Data sockets come complete with a USB cable that must be connected to the corresponding USB socket on a computer to allow data to be transferred to and from the on desk module. Our new USB charging socket is hardwired into the module’s power supply to produce a dual port USB charger capable of charging a wide range of devices including the simultaneous charging of two Apple devices.

AffinityConti

(Metal)Conti

(Plastic)Contour Eclipse Elite+ Harmony Horizon PortHole

Power Master

Wedge

French/Belgian 16A ✓ ✓ ✓ ✓ ✓ X ✓ ✓ X ✓ ✓

German (Schuko) 16A ✓ ✓ ✓ ✓ ✓ X ✓ ✓ X ✓ ✓

Indian 6A ✓ ✓ ✓ ✓ ✓ X ✓ ✓ X X ✓

Indian 16A ✓ ✓ X X X X ✓ ✓ X X X

Swiss 10A ✓ ✓ ✓ ✓ ✓ X ✓ ✓ X ✓ ✓

USA 15A ✓ ✓ ✓ ✓ ✓ X ✓ ✓ X ✓ ✓

Italian 10A/16A ✓ ✓ ✓ ✓ ✓ X ✓ ✓ X ✓ ✓

Footprint ✓ ✓ ✓ ✓ ✓ X ✓ ✓ X X ✓

Cat 5e ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ X ✓ ✓

Cat 6 ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓

Cat 6a ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓

Data Slots ✓ X X ✓ X X ✓ ✓ X X ✓

Data Spools ✓ X X ✓ X X ✓ ✓ X X X

VGA ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ X ✓ ✓

3.5mm Mini Jack Audio ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ X ✓ ✓

HDMI ✓ ✓ X ✓ ✓ X ✓ ✓ ✓ X ✓

USB ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓

USB Hub ✓ ✓ ✓ ✓ ✓ X ✓ ✓ X X ✓

USB Charger ✓ ✓ ✓ ✓ ✓ X ✓ ✓ ✓ X ✓

Phono ✓ ✓ ✓ ✓ ✓ X ✓ ✓ X ✓ ✓

Breakers/Protection ✓ ✓ X ✓ X X ✓ ✓ X X X

Compatible modules are identified by the blue tick ✓Product Selection

Rating of commonly used appliances (Source: Electrical Safety Council www.esc.org.uk)

Appliances Amps Watts

Computer Monitor <0.5A 100W

Desktop Computer 3.0A 700W

Desk Lamp <0.5A 60W

Laptop Charger <0.5A 65-100W

Printer <0.5A 50W

Appliances Amps Watts

Mobile Phone Charger <0.5A <12W

Landline Cordless Phone Charger <0.5A 10W

Wi-Fi Router <0.5A 10W

Radio <0.5A 40W

Vacuum Cleaner 9.0A 2000W

USB Data USB Charging

Non-compatible modules are identified by the red cross X

59sales line: +44 (0)1709 829511

Socket options

Make your Own Power Module to Suit Your Needs At CMD, we are proud of our customer lead specials. Sockets are available in black, grey and white.

Note: Some modules are also available with Footprint, our energy management system, and our breakers/protection options so please ask a member of our sales team for more information.

Switches:• Neon Switch• Single Pole (with

or without neon)• Double Pole (with

or without neon)

UK Sockets:• Standard UK 45 & 90 degrees • Standard UK fused 45 & 90 degrees (3.15A & 5A)• T-earth 90 degrees• T-earth 90 degrees fused (3.15A & 5A)

International Sockets:• French/Belgian• German• Italian• Swiss• American• Danish• Indian

Note: International sockets are only available in black and white but can be fitted with a black, grey or white surround.

60 www.cmd-ltd.com

We deliver a range of products and solutions, which include:

• USB charging & data transfer (hub)• Induction charging (wireless charging)• Audio & Visual options (HDMI, VGA, Phono and much more)• Every level of data• International sockets• Protection• Switching

options Socket

While standard con�gurations are offered, power modules can be adapted to meet your requirements. With a world of choice between sockets simply call us on +44 (0)1709 829511 to discuss your requirements.

Audio & Visual• HDMI• VGA• 3.5mm Audio• 3 Phono• Phono• S Video

Data Sockets:• RJ11• RJ45 (Cat5e, Cat6

and Cat6a)• LJ6C• USB• Data Spool• Data Slots

USB Charger:• 2 Amp USB Charger• We also have a USB Hub available

61sales line: +44 (0)1709 829511

Note: This dual port charging device is for charging only. No connection is made to a computer so data transfer is not available. USB cables are required but are not provided.

Black White Grey

• Complies with the latest charging standard (BS EN 62684:2010 Interoperability speci�cations of common external power supply (EPS) for use with data-enabled mobile telephones)

• Dual port USB charger capable of charging a wide range of devices including the simultaneous charging of two Apple devices.

• Powered from adjacent power socket so no additional wiring is required

• The charger is compatible with our full range of in desk and on desk power modules

Charger dual port USB

It’s all about USB!The new dual port USB charger from CMD Ltd

New

Note: A GST to ST adaptor is available on request

On

Desk

62 www.cmd-ltd.com

Harmony WedgeContour

Horizon

dual port USB Charger

Compatible Devices:

Please note that this table represents a sample of devices tested and is accurate as of Wednesday 1st January 2014. If you intend to use this product with an untested device we strongly recommend that you request a sample module and test the device before placing an order.

iPad iPhone 5 iPod Touch Nexus 4BlackberryPlaybook

Blackberry Curve

Samsung Galaxy S3

Kindle HD HTC Desire ZHTC

Desire HD

✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓

Af�nity Eclipse

Cat6 and Micro USB Spools:

New for 2014 is our Cat6 data spool and our Micro USB spool. This unit can be �tted to our full range of on desk power modules, removing the need for separate cables. Please ask a member of our sales team for more information.

Spring2014

Code MRP

161404 £5.60

Micro USB Adaptor:

Converts a micro USB connector to a mini USB, a Apple Lightening and a Apple 30 pin connector.

On

Des

k

63sales line: +44 (0)1709 829511

Please see page 59 for more information.


Please see page 59 for more information.

Choose from power, data, audio, USB, and international sockets

Flame retardant ABSplastic body with a

choice of fascia colours

Lateral fuses with a choice of 3.15A or 5A to comply

with BS 6396:2008

Contour has a modern, curved appearance displaying many design features like our new lateral fuse carrier, internal segregation between power and data and comes complete with plastic clips on the covers so there are no visible fixing screws and fully compliant to current safety regulations.

Contour power module

• Power & data cables all exit from the back of the unit unless on a slatwall/tool rail where cables exit from the bottom of the unit

• Unit complies with BS 5733• All standard options are supplied with a 1m mains

lead to 3 pole connector and 3m data lead where relevant

• Requires a separate mains lead if connected directly to a socket

• Fixing via Contour C clamp or adhesive �xing kit

Build it your way

*Please note that 6 tiles is the maximum with a maximum

length of 362.5mm.

Configure to allow energy to be monitored and

controlled with Footprint. See page 103 for more details.

Manage your energy

Note: CMD cannot accept any responsibility or liability for providing category 6 performance in products supplied.

Fuses: Only accessible after removal of equipment plug. Lead lengths shown will be the conductor length and not the distance from the end of the module to the plug. For example, a 3m prewired power lead will be approximately 2.875m as 125mm will be internal for the termination, this is also applicable for data leads. Data fascias may be subject to colour change.

Cables: White and grey modules are supplied with white cables and black modules are supplied with black cables.

HDMI: CMD cannot accept any responsibility or liability for providing HDMI performance in products supplied over 10m in length.


On

Desk

64 www.cmd-ltd.com

ST Code GST Code Colour Description MRP

94PS04 94PS04GST Black Contour 2 x power, 1m mains lead to 3 pole connector £40.86

94PS01 94PS01GST Grey £40.86

94PS07 94PS07GST All White £40.86

94PS10 94PS10GST All Black £40.86

94PS06 94PS06GST Black Contour 4 x power, 1m mains lead to 3 pole connector £60.45

94PS03 94PS03GST Grey £60.45

94PS09 94PS09GST All White £60.45


94U040 94U040GST Black Contour 2 x power, 1m mains lead to 3 pole connector, 2 x RJ45 data Cat6, 3m data leads £109.01

94U036 94U036GST Grey £109.01

94U041 94U041GST All White £109.01

94U042 94U042GST All Black £109.01

94U043 94U043GST Black Contour 4 x power, 1m mains lead to 3 pole connector, 2 x RJ45 data Cat6, 3m data leads £128.59

94U035 94U035GST Grey £128.59

94U044 94U044GST All White £128.59

94U045 94U045GST All Black £128.59

94CP01 94CP01GST Black Contour 1 x power, 1m mains lead to 3 pole connector, 1 x USB 2A Charger £94.97

94CP02 94CP02GST Grey £94.97

94CP03 94CP03GST All White £94.97

94CP04 94CP04GST All Black £94.97

94CP17 94CP17GST Black Contour 1 x power, 1m mains lead to 3 pole connector, 1 x USB 2Amp Charger, 1 x RJ45

data Cat6

£129.02

94CP18 94CP18GST Grey £129.02



94CP05 94CP05GST Black Contour 2 x power, 1m mains lead to 3 pole connector, 1 x USB 2A Charger £104.77

94CP06 94CP06GST Grey £104.77




data Cat6, 3m data leads, 3m data leads

£138.81

94CP22 94CP22GST Grey £138.81




data Cat6, 3m data leads

£172.88

94CP38 94CP38GST Grey £172.88



Black Grey All White All Black

Adhesive Fixing Kit

Adhesive Kit, 1 Kit required per module

C clamp

We recommend using 2 xC clamps for any module with more than 2 sockets. Fits desk thickness between 20mm-32mm

power module Contour

Code MRP

440006 £3.49

Code MRP

440371 £4.73 35mm

14mm

35m

m

On

Des

k

65sales line: +44 (0)1709 829511


Extruded aluminium body for when longer Contour

modules are required


with BS 6396:2008

Contour has a modern, curved appearance displaying many design features like our new lateral fuse carrier, internal segregation between power and data and comes complete with plastic clips on the covers so there are no visible fixing screws and fully compliant to current safety regulations.

Contour power module

• Power & data cables all exit from the back of the unit unless on a slatwall/tool rail where cables exit from the bottom of the unit


lead to 3 pole connector and 3m data lead where relevant

• Requires a separate mains lead if connected directly to a socket

• Fixing via Contour C clamp or adhesive �xing kit

Now available

with metal extrusion






Please see page 59 for more information.Please see page 59 for more information.

Build it your way



Manage your energy


On

Desk

66 www.cmd-ltd.com

power module Contour

Black Grey White

Adhesive Fixing Kit


C clamp

We recommend using 2 x C clamps for any module with more than 2 sockets. Fits desk thickness between 20mm-32mm

Code MRP

440006 £3.49

Code MRP

440371 £4.73 35mm

14mm

35m

mST Code GST Code Colour Description MRP

94MPS01B 94MPS01BGST Black Contour 2 x power, 1m mains lead to 3 pole connector £44.95

94MPS01G 94MPS01GGST Grey £44.95

94MPS01W 94MPS01WGST White £44.95

94MPS02B 94MPS02BGST Black Contour 4 x power, 1m mains lead to 3 pole connector £66.49

94MPS02G 94MPS02GGST Grey £66.49

94MPS02W 94MPS02WGST White £66.49

94MUS01B 94MUS01BGST Black Contour 2 x power, 1m mains lead to 3 pole connector, 2 x RJ45 data Cat6, 3m data leads £119.91

94MUS01G 94MUS01GGST Grey £119.91

94MUS01W 94MUS01WGST White £119.91

94MUS02B 94MUS02BGST Black Contour 4 x power, 1m mains lead to 3 pole connector, 2 x RJ45 data Cat6, 3m data leads £141.45

94MUS02G 94MUS02GGST Grey £141.45

94MUS02W 94MUS02WGST White £141.45

94MCP02B 94MCP02BGST Black Contour 1 x power, 1m mains lead to 3 pole connector, 1 x USB 2Amp Charger £104.47

94MCP02G 94MCP02GGST Grey £104.47

94MCP02W 94MCP02WGST White £104.47

94MCP03B 94MCP03BGST Black Contour 1 x power, 1m mains lead to 3 pole connector, 1 x USB 2Amp Charger, 1 x RJ45


£141.92



94MCP01B 94MCP01BGST Black Contour 2 x power, 1m mains lead to 3 pole connector, 1 x USB 2Amp Charger £115.25





£152.69





£190.17



On

Des

k

67sales line: +44 (0)1709 829511

Harmony power module

Harmony is a versatile desk power solution, specifically designed to meet the increasing power and everyday communication needs of a working office. The Harmony features integral fuses which are fully compliant to current safety regulations and is configured with segregated power & data choices to suit different workstation requirements. Harmony can be used in conjunction with our under desk modules to provide greater power solutions and is fitted to the edge of desk with C clamps or adhesive kit making it functional yet non-intrusive to the working desk.


Lateral fuses with a choice of 3.15A

or 5A to comply withBS 6396:2008

Anodised aluminium extruded body

• Anodised aluminium extruded body available in silver or painted black

• Choice of Black, Grey or White fascias/end caps• Fully segregated power and data• All UK sockets feature integral fuses. Choice of

3.15A or 5A fuses are available to comply with BS 6396:2008

• All standard options are supplied with a 1m mains lead to male 3 pole connector. Requires a separate mains lead if passing from a 13A socket

• Data leads are supplied at a standard length of 3 metres

• Tested to comply BS 5733• Fixing via standard C clamps or adhesive �xing kit







Build it your way



Manage your energy


On

Desk

68 www.cmd-ltd.com

power module Harmony

All BlackBlack/Silver Grey/Silver White/Silver

50mm

35mm

35m

m

C clamp

We recommend using 2 x C clamps for any module with more than 2 sockets. Fits desk thickness of 20-32mm

Code MRP

440005 £4.73

Adhesive Fixing Kit


Code MRP

440006 £3.49


84PS01 84PS01GST Black/Silver Harmony 2 x power, 1m mains lead to 3 pole connector £43.11

84P656 84P656GST Grey/Silver £43.11

84P642 84P642GST White/Silver £43.11


84PS05 84PS05GST Black/Silver Harmony 4 x power, 1m mains lead to 3 pole connector £64.71




84U1728 84U1728GST Black/Silver Harmony 2 x power, 1m mains lead to 3 pole connector, 2 x RJ45 data Cat6, 3m data leads £111.26

84U1723 84U1723GST Grey/Silver £111.26

84U1729 84U1729GST White/Silver £111.26

84U1732 84U1732GST All Black £111.26

84U1706 84U1706GST Black/Silver Harmony 4 x power, 1m mains lead to 3 pole connector, 2 x RJ45 data Cat6, 3m data leads £132.83



84U1733 84U1733GST All Black £132.83

84CP01 84CP01GST Black/Silver Harmony 1 x power, 1m mains lead to 3 pole connector, 1 x USB 2A Charger £96.21

84CP02 84CP02GST Grey/Silver £96.21

84CP03 84CP03GST White/Silver £96.21


84CP17 84CP17GST Black/Silver Harmony 1 x power, 1m mains lead to 3 pole connector, 1 x USB 2Amp Charger,

1 x RJ45 data Cat6, 3m data leads

£130.28




84CP05 84CP05GST Black/Silver Harmony 2 x power, 1m mains lead to 3 pole connector, 1 x USB 2A Charger £106.99






£141.07






£175.14




On

Des

k

69sales line: +44 (0)1709 829511

Wedge power module

Wedge is a more stylish compact version for desk power, specifically designed to meet the increasing power and everyday communication needs of a working office. It has many design features like integral fuses which are fully compliant to current safety regulations, with segregated power & data together with the added benefit of being installed to a slatwall/tool rail or flush to a screen/edge of desk, making it functional yet non-intrusive to the working desk. Wedge can be used in conjunction with our under desk modules to provide greater power solutions. It is also available in an upright (Type 1) or flat format (Type 2) to suit various desking styles and demands.

Lateral fuses with a choice of 3.15A or 5A to comply with

BS 6396:2008


• Anodised aluminium extruded body is standard• Choice of black, grey or white fascias/end caps• Fully segregated power and data• All UK sockets feature integral fuses. Choice of

3.15A or 5A fuses are available to comply with BS 6396:2008

• All standard options are supplied with a 1m mains lead to male 3 pole connector. Requires a separate mains lead if passing from a 13A socket

• Data leads are supplied at a standard length of 3 metres

• Complies with BS 5733• Fixing via standard C clamps or adhesive �xing kit

Slatwall Fixing Kit

Suitable for slatwall and tool rails.

Code MRP

440049 £13.74

Anodised aluminium extruded body







Build it your way



Manage your energy


On

Desk

70 www.cmd-ltd.com

Type 1 Type 2

power module WedgeType 1

Black/Silver Grey/SilverWhite/Silver

50mm

35mm

35m

m

C clamp

We recommend using 2 x C clamps for any module with more than 2 sockets. Fits desk thickness of 20-32mm

Code MRP

440005 £4.73

Adhesive Fixing Kit


Code MRP

440006 £3.49


81PS01 81PS01GST Black/Silver Wedge 2 x power, 1m mains lead to 3 pole connector £47.22



81PS02 81PS02GST Black/Silver Wedge 4 x power, 1m mains lead to 3 pole connector £70.16



81U395 81U395GST Black/Silver Wedge 2 x power, 1m mains lead to 3 pole connector, 2 x RJ45 data Cat6, 3m data leads £120.46



81U463 81U463GST Black/Silver Wedge 4 x power, 1m mains lead to 3 pole connector, 2 x RJ45 data Cat6, 3m data leads £143.40



81CP01 81CP01GST Black/Silver Wedge 1 x power, 1m mains lead to 3 pole connector, 1 x USB 2A Charger £104.44



81CP13 81CP13GST Black/Silver Wedge 1 x power, 1m mains lead to 3 pole connector, 1 x USB 2Amp Charger, 1 x RJ45 data Cat6, 3m data leads

£141.07



81CP04 81CP04GST Black/Silver Wedge 2 x power, 1m mains lead to 3 pole connector, 1 x USB 2A Charger £115.90




£152.52




£189.14


81CP33 81CP33GST White/Silver £189.14O

n D

esk

71sales line: +44 (0)1709 829511

modular power system

Rotasoc® is widely considered to be the industry standard for customisable under desk power as it includes a comprehensive selection of multi-socket power and data modules with 360° rotatable socket outlets, available in 32 & 16 Amp versions.

Our new horizontal and vertical on desk modules work in conjunction with our under desk Rotasoc system to create the perfect modular power and data solution. See page 90 for more information.

Flexibleinterconnecting

module

Choice of modules with 2, 3 and 4

360° Rotating Sockets

Metal desk �xing clamp

Fixing screws compatible for desk thickness between 20mm and 35mm

New

Protection/Switching SocketsInfeed Interconnect On desk module

On

Desk

72 www.cmd-ltd.com


Code Horizontal Socket Modules MRP

Pre-wired with 1m 16A interconnection lead - Standard Earth

RAK001 2 Gang 3.15A Individually Fused Socket Module Black Body Grey Sockets

£43.30


£49.07


£51.44

RAK010 2 Gang Non-fused Socket Module Black Body Grey Sockets

£36.89


£42.07


£45.89

Pre-wired with 3m power lead and 13A plug - Standard Earth


£39.15


£44.92


£50.78

RAK030 2 Gang Non-fused SocketModule Black Body Grey Sockets

£36.23


£41.41


£45.23

Code Vertical Socket Modules MRP

Pre-wired with 1m 16A interconnection lead - Standard Earth

RAL003 2 Gang 3.15A Individually Fused Socket Module Black Body Grey Sockets

£38.16


£43.94

RAL005 2 Gang Non-fused Socket Module Black Body Grey Sockets

£35.24

RAL006 3 Gang Non-fused SocketModule Black Body Grey Sockets

£40.43

Pre-wired with 3m power lead and 13A plug - Standard Earth


£39.90


£45.96

Pre-wired with 1m 16A interconnection lead - Clean Earth

RAL012 2 Gang 3.15A Individually Fused Socket Module Black Body Red Sockets

£38.42


£44.33

RAL014 2 Gang Non-fused Socket Module Black Body Red Sockets

£35.34

RAL015 3 Gang Non-fused Socket Module Black Body Red Sockets

£40.59

Pre-wired with 3m power lead and 13A plug - Clean Earth


£40.16


£46.07

Horizontal Module *Vertical Module

*Note: The vertical socket modules can be connected to the desk using a through desk M10 �xing bolt - not supplied.

On

Des

k

73sales line: +44 (0)1709 829511

• Available with a choice of black, white and grey plastic fascia surrounded by a metallic �nished trim

• Compact dimensions, ideal for space-saving installations

• Features individual fuse & independently certi�ed to BS 5733

• Fully segregated power and data• Easy to retro�t, incorporates an under desk, hand

tightened barrel nut to �x unit in place• Power and data cables all exit from the base of the

unit & come with a standard 1m mains lead to 3 pole connector, 3m data lead & 2m USB lead where appropriate

• Designed to �t any desk thickness between 13mm and 50mm

With its innovative design, PortHole is ideal for adapting an existing 80mm cable hole to allow a single power socket and a choice of keystones to be �tted to a desk with a simple screw �t mechanism.

PortHole power module

Individual fusedpower socket

(3.15A or 5A options)

Available in black, white or grey with metallic

�nished trim

Lip of the PortHole ensures no spillages can

damage the module

Other keystones available (USB, HDMI, Data, Mini

Jack)

Independently certi�ed to comply with BS 5733

Note: CMD cannot accept any responsibility or liability for providing category 5e and 6 performance in products supplied.






Build it your way

In D

esk

74 www.cmd-ltd.com


90P001B 90P001BGST Black 1 x Power Socket

Power socket 3.15A individually fused with 1m mains cable

to 3 Pole connector

£60.69

90P001G 90P001GGST Grey £60.69

90P001W 90P001WGST White £60.69

90U001B 90U001BGST Black 1 x Power Socket, 1 x RJ45 Cat6 Socket

Power socket 3.15A individually fused with 1m mains cable to 3 Pole connector and 3m data lead

£95.97

90U001G 90U001GGST Grey £95.97

90U001W 90U001WGST White £95.97

90U002B 90U002BGST Black 1 x Power Socket, 2 x RJ45 Cat6 Sockets

Power socket 3.15A individually fused with 1m mains cable to 3 Pole connector and 2 x 3m data leads

£131.25

90U002G 90U002GGST Grey £131.25

90U002W 90U002WGST White £131.25

90U003B 90U003BGST Black 1 x Power Socket, 1 x USB Socket

Power socket 3.15A individually fused with 1m mains cable to 3 Pole connector and 2m USB lead

£93.69

90U003G 90U003GGST Grey £93.69

90U003W 90U003WGST White £93.69

90U004B 90U004BGST Black 1 x Power Socket, 2 x USB Sockets

Power socket 3.15A individually fused with 1m mains cable to 3 Pole connector and 2 x 2m USB leads

£126.71

90U004G 90U004GGST Grey £126.71

90U004W 90U004WGST White £126.71

90U005B 90U005BGST Black 1 x Power Socket, 1 x RJ45 Cat6 Socket, 1 x USB Socket

Power socket 3.15A individually fused with 1m mains cable to 3 Pole connector, 3m data lead and 2m USB lead

£128.99

90U005G 90U005GGST Grey £128.99

90U005W 90U005WGST White £128.99

power module PortHole

HDMI sockets, Mini Jack Keystones and 5A fuses are also available. Cat6 socket is fully backward compatible.

Black

White

Grey


�nished trim

Tool free ‘screw �t’103.5mm diameter lock

to nut

In D

esk

75sales line: +44 (0)1709 829511

Note: CMD cannot accept any responsibility or liability for providing category 6 performance in products supplied. We will however �t category 6 speci�cation components where speci�ed.

Fuses only accessible after removal of equipment plug. Lead lengths shown will be the conductor length and not the distance from the end of the module to the plug. For example, a 3m prewired power lead will be approximately 2.875m as 125mm will be internal for the termination, this is also applicable for data leads.


This new version of PortHole has been designed to include our new dual port USB charger, which is capable of charging a wide range of devices including the simultaneous charging of two Apple devices.

PortHole II power and USB charging module

Individual fusedpower socket

(3.15A or 5A options)


�nished trim

Lip of the PortHole ensures no spillages can

damage the module

USB charging ports

New

Independently certi�ed to comply with BS 5733

• Complies with the latest charging standard (BS EN 62684:2010 Interoperability speci�cations of common external power supply (EPS) for use with data-enabled mobile telephones)

• Dual port USB charger capable of charging a wide range of devices including the simultaneous charging of two Apple devices

• Two independent USB charging ports, which can be used at the same time• Powered from adjacent power socket so no additional wiring is required• The charger is compatible with our full range of in desk and on desk modules


90CP01B 90CP01BGST Black 1 x Power Socket Power socket 3.15A individually fused with 2 port USB charger, 1m mains cable to 3 Pole connector

£183.40

90CP01G 90CP01GGST Grey £183.40

90CP01W 90CP01WGST White £183.40


In D

esk

76 www.cmd-ltd.com

PortHole III wireless charging

wireless charging module PortHole IIIUSB Charging Compatible Devices:

Please note that this table represents a sample of devices tested and is accurate as of Wednesday 1st January 2014. If you intend to use this product with an untested device we strongly recommend that you request a sample module and test the device before placing an order.

Easy Fixing

The PortHole III through desk wireless charging module has been designed to �t any desk that has been installed with a standard 80mm grommet hole.

Wireless Charging

Simply place your device on the wireless charging module and it will begin charging. The LED indicator on the charging module will illuminate when your phone is in the correct position to start charging. Please note that your device must support wireless charging.

GST Code Colour Description MRP

90WP01B Black 1 x Wireless charging moduleWireless charging module, 1m mains cable to 3 Pole connector

£175.00

90WP01G Grey £175.00

90WP01W White £175.00

Spring2014

Wireless charging surfaceLip of the PortHole

ensures no spillages can damage the module

This latest version of our PortHole family has the same stylish looks but utilises the latest wireless charging technology.

iPad iPhone 5 iPod Touch Nexus 4BlackberryPlaybook

Blackberry Curve

Samsung Galaxy S3

Kindle HD HTC Desire ZHTC

Desire HD

✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓

be the first


In D

esk

77sales line: +44 (0)1709 829511

Horizon power module

The Horizon through desk module offers accessible power and data sockets at the desk top. This unit fits flush into the desktop with an angular and smooth aesthetic finish. Spring release buttons lock unit above desk surface. These are then pushed together to allow the unit to retract into housing below desk surface. The Horizon’s lid retracts to allow access from both sides, when opened it lifts and locks proud of the desk surface which makes it ideal for use in boardrooms or conference tables. Horizon is finished in Fusion Silver.



with BS 6396:2008

Spring loadedrelease button

Retractable lid

Nylon brushcable entry

• Fusion silver �nish with �ame retardant ABS Grey (RAL7004) socket fascias

• Module lifts and locks proud of the desk surface• Lid retracts to allow access from both sides –

suitable for conference tables• Fitting from above, locks into position using two

screws• Spring loaded buttons lock module proud of

desk surface and on release allows module to retract below desk surface

• Available with power and data con�gurations to suit individual client needs

• All UK power socket versions feature individual fuses

• Choice of 3.15A or 5A fuses are available to comply with BS 6396:2008


lead to 13A UK plug and 3m data leads where relevant

Closed Position


In D

esk

78 www.cmd-ltd.com

ST Code GST Code Description MRP

96P044 96P044GSTHorizon 2 x power, 3m mains lead to 13A UK plugProduct cutout dimensions: 134mm x 205mm*

£116.76

96P045 96P045GSTHorizon 4 x power, 3m mains lead to 13A UK plugProduct cutout dimensions: 134mm x 330mm*

£147.88

96U122 96U122GSTHorizon 2 x power, 3m mains lead to 13A UK plug, 2 x RJ45 data Cat6, 3m data leadsProduct cutout dimensions: 134mm x 267mm*

£185.12

96U123 96U123GSTHorizon 4 x power, 3m mains lead to 13A UK plug, 2 x RJ45 data Cat6, 3m data leadsProduct cutout dimensions: 134mm x 391mm*

£216.24

96H066 96H066GSTHorizon 2 x power, 3m mains lead to 13A UK plug, 2 x RJ45 data Cat6, 1 x VGA, 1 x mini jack, 3m data & A/V leadsProduct cutout dimensions: 134mm x 330mm*

£280.63

96H067 96H067GSTHorizon 2 x power, 3m mains lead to 13A UK plug, 2 x RJ45 data Cat6, 1 x VGA, 1 x mini jack, 1 X HDMI, 3m data & A/V leadsProduct cutout dimensions: 134mm x 391mm*

£339.92

96CP01 96CP01GSTHorizon 1 x power, 3 mains lead to 13A UK plug, 1 x USB 2Amp ChargerProduct cutout dimensions: 134mm x 205mm*

£165.91

96CP05 96CP05GSTHorizon 1 x power, 3 mains lead to 13A UK plug, 1 x USB 2Amp Charger, 1 x RJ45 data Cat6, 3m data leadsProduct cutout dimensions: 134mm x 267mm*

£200.09

96CP02 96CP02GSTHorizon 2 x power, 3 mains lead to 13A plug, 1 x USB 2 Amp Charger, Product cutout dimensions: 134mm x 267mm*

£181.47


£215.65


£249.83

power module Horizon

Note: CMD cannot accept any responsibility or liability for providing category 6 performance in products supplied. *Dimensions are meant as a guide and have a +/-1mm tolerance.





Build it your way



Manage your energy


In D

esk

79sales line: +44 (0)1709 829511


Closed Position

Affinity power module



with BS 6396:2008

Af�nity module offers the convenience of power and data at the desktop when you need it and an uncluttered work surface when you don’t. It is a concealed unit that can function in the open or closed position.

• Unit has grey fascia end caps and an anodised aluminium body. Fascia is Vø �ame retardant ABS with grey socket fascias

• Clamps into rectangular location hole using ratchet clamps

• Power and data cables all exit from under the side of the unit

• All UK power socket versions feature individual fuses

• Choice of 3.15A or 5A fuses are available to comply with BS 6396:2008

• Unit complies with BS 5733• All standard options are supplied with a 3m

mains lead to 13A UK plug and 3m data leads where relevant

Anodised aluminium extended body

In D

esk

80 www.cmd-ltd.com

power module Affinity

Note: CMD cannot accept any responsibility or liability for providing category 6 performance in products supplied. *Dimensions are meant as a guide and have a +/-1mm tolerance.





85PG01 85PG01GSTAffinity 2 x power, 3m mains lead to 13A UK plugProduct cutout dimensions: 132mm x 161.5mm*

£89.61

85PG03 85PG03GSTAffinity 4 x power, 3m mains lead to 13A UK plugProduct cutout dimensions: 132mm x 286.5mm*

£123.04

85U490 85U490GSTAffinity 2 x power, 3m mains lead to 13A UK plug, 2 x RJ45 data Cat6, 3m data leadsProduct cutout dimensions: 132mm x 286.5mm*

£180.99

85U493 85U493GSTAffinity 4 x power, 3m mains lead to 13A UK plug, 2 x RJ45 data Cat6, 3m data leadsProduct cutout dimensions: 132mm x 361.5mm*

£214.39

85HG02 85HG02GSTAffinity 2 x power, 3m mains lead to 13A UK plug, 2 x RJ45 data Cat6, 1 x VGA, 1 x mini jack, 3m data & A/V leadsProduct cutout dimensions: 132mm x 299mm*

£314.19

85AV52050 85AV52050GSTAffinity 2 x power, 3m mains lead to 13A UK plug, 2 x RJ45 data Cat6, 1 x VGA, 1 x mini jack, 1 x HDMI, 3m data & A/V leadsProduct cutout dimensions: 132mm x 324mm*

£397.31

85CP01 85CP01GSTAffinity 1 x power, 3 mains lead to 13A UK plug, 1 x USB 2Amp ChargerProduct cutout dimensions: 132mm x 174mm*

£159.07

85CP05 85CP05GSTAffinity 1 x power, 3 mains lead to 13A UK plug, 1 x USB 2Amp Charger, 1 x RJ45 data Cat6, 3m data leadsProduct cutout dimensions: 132mm x 211.5mm*

£204.73

85CP02 85CP02GSTAffinity 2 x power, 3 mains lead to 13A plug, 1 x USB 2 Amp ChargerProduct cutout dimensions: 132mm x 224mm*

£175.76


£221.44


£267.13


Build it your way



Manage your energy


In D

esk

81sales line: +44 (0)1709 829511

• Standard �nish is anodised silver body with grey (RAL7004) socket fascias

• Easy to �t to new furniture or to retro�t using a 115mm hole saw

• Incorporates an under desk, hand tightened barrel nut to �x unit into place

• Fully segregated power and data• Choice of power and data connectors to

most speci�cations

Eclipse power module

A through desk power and data module that pulls up from the work surface and pushes back down to a flush position when not in use.


with BS 6396:2008

Con�gurablemodi�cations

Power or data sockets available

• Power and data cables all exit from the base of the unit

• Standard lead length is 3m mains to 13A plug

• All UK power sockets feature integral fuses• Choice of 3.15A or 5A fuses are available to

comply with BS 6396:2008• Complies with BS 5733


Now in greyIn

Desk

82 www.cmd-ltd.com

power module Eclipse

Closed Position

Note: Please note that Cat 6 is backwards compatible. CMD cannot accept any responsibility or liability for providing category 6 performance in products supplied. We will however �t category 6 speci�cation components where speci�ed. *Dimensions are meant as a guide and have a +/- 1mm tolerance.

Fuses only accessible after removal of equipment plug. Lead lengths shown will be the conductor length and not the distance from the end of the module to the plug. For example, a 3m prewired power lead will be approximately 2.875m as 125mm will be internal for the termination, this is also applicable for data leads. Data fascias may be subject to colour change.



83P066 83P066GST Eclipse 2 x power, 3m mains lead to 13A UK plug £71.13

83P067 83P067GST Eclipse 4 x power, 3m mains lead to 13A UK plug £89.85

83U235 83U235GST Eclipse 2 x power, 3m mains lead to 13A UK plug, 2 x RJ45 data Cat6, 3m data leads £136.24

83U236 83U236GST Eclipse 4 x power, 3m mains lead to 13A UK plug, 2 x RJ45 data Cat6, 3m data leads £154.96

83H099 83H099GSTEclipse 2 x power, 3m mains lead to 13A UK plug, 2 x RJ45 data Cat6, 1 x VGA, 1 x mini jack, 3m data & A/V leads

£236.87

520167 520167 Eclipse 115mm cable outlet £6.23

83CP01 83CP01GST Eclipse 1 x power, 3 mains lead to 13A UK plug, 1 x USB 2Amp Charger £122.82

83CP05 83CP05GSTEclipse 1 x power, 3 mains lead to 13A UK plug, 1 x USB 2Amp Charger, 1 x RJ45 data Cat6, 3m data leads

£155.37

83CP02 83CP02GST Eclipse 2 x power, 3 mains lead to 13A plug, 1 x USB 2Amp Charger £132.19


£164.73


£197.27


Build it your way



Manage your energy


In D

esk

83sales line: +44 (0)1709 829511

All products have 300mm earth lead to M5 ring Socket Orientation: N – is North, E – is East & W – is West


92K005 92K005GST 2x power sockets individually fused 3.15A with male 3 Pole Connector input & female 3 Pole Connector output. EW £14.22

92K011 92K011GST 2x power sockets individually fused 5A with male 3 Pole Connector input & female 3 Pole Connector output. EW £14.22

92K006 92K006GST 2x power sockets with neon switches individually fused 3.15A with male 3 Pole Connector input & female 3 Pole Connector output. EW £15.40

92K012 92K012GST 2x power sockets with neon switches individually fused 5A with male 3 Pole Connector input & female 3 Pole Connector output. EW £15.40

92K007 92K007GST 3x power sockets individually fused 3.15A with male 3 Pole Connector input & female 3 Pole Connector output. ENW £17.95

92K013 92K013GST 3x power sockets individually fused 5A with male 3 Pole Connector input & female 3 Pole Connector output. ENW £17.95

92K002 92K002GST 4x power sockets individually fused 3.15A with male 3 Pole Connector input & female 3 Pole Connector output. ENNW £22.86

92K008 92K008GST 4x power sockets individually fused 5A with male 3 Pole Connector input & female 3 Pole Connector output. ENNW £22.86

92K004 92K004GST 4x power sockets individually fused 3.15A with male 3 Pole Connector input & female 3 Pole Connector output. NNNN £22.86

92K010 92K010GST 4x power sockets individually fused 5A with male 3 Pole Connector input & female 3 Pole Connector output. NNNN £22.86

92K003 92K003GST 4x power sockets one neon switch, individually fused 3.15A with male 3 Pole Connector input & female 3 Pole Connector output. NNNN £24.04

92K009 92K009GST 4x power sockets one neon switch, individually fused 5A with male 3 Pole Connector input & female 3 Pole Connector output. NNNN £24.04

92K001 92K001GST 6x power sockets one neon switch, individually fused 3.15A with male 3 Pole Connector input. *No output. NNNNNW £41.45


with BS 6396:2008

Neon switch

Elite+ power module

Elite+ is a moulded plastic power module, great when affordability is top priority.

• Requires a separate connecting lead

• Product independently tested to BS5733

Fixing Lugs

Please note: Fuses only accessible after removal of equipment plug. *Complies with BS6396.

90o rotated socket for transformer plugs


Un

der D

esk

84 www.cmd-ltd.com


92KD01 92KD01GST 2x Power sockets one neon switch and 2x Data Compartment (Empty) £24.98

92KD02 92KD02GST2x Power sockets one neon switch and 2x RJ45 CAT6 data sockets with 3m data leads

£66.54


£71.90


£77.27

92KD05 92KD05GST 4x Power sockets one neon switch and 4x Data Compartment (Empty) £40.43

92KD06 92KD06GST4x Power sockets one neon switch and 2x RJ45 CAT6 data sockets with 3m power and data leads 2x Data Compartment (Empty)

£91.06


£97.20


£103.32

power and data module Elite+ These new combined power and data modules have been designed to enable customers to con�gure their own data needs without the associated risks of exposure to an opened power module.

Note: Certain con�gurations can accommodate Cat6a Data sockets (contact us for further information)

Please note that Cat 6 is backwards compatible. CMD cannot accept any responsibility or liability for providing category 6 performance in products supplied. We will however �t category 6 speci�cation components where speci�ed.

Up to 4 data sockets

Fixing lugs

New4x UK sockets

Neon switchEarth lead


92K014 92K014GSTSeparate Data Module x 4 compartment - Empty Shell

£5.76

92K018 92K018GST2x RJ45 CAT6 data sockets with 3m data leads

£63.39

92K020 92K020GST4x RJ45 CAT6 data sockets with 3m data leads

£113.99

Fixing lugs

Up to 4 data sockets

Un

der

Des

k

85sales line: +44 (0)1709 829511

Power Master power and data module

Power Master is ideal for when you need power and data to be screen mounted or just �exibility is a must. Power Master is a compact unit for �exible power and data distribution. Available with switched or unswitched individually fused sockets which are available in 3 or 4 gang outlet con�guration where you can choose the functionality you need in your unit. May be screen �ush mounted using removable front bezel (see image with the front removed and screws).

Black VØ rated �ame retardant high impact

polystyrene

Individually fused

Choice of data and audio sockets

Can be screen mounted

• Black VØ rated �ame retardant high impact polystyrene casing with black socket fascias• All sockets feature integral fuses. Choice of 3.15A or 5A fuses to comply with BS 6396:2008• All modules are �tted with external earth leads• Fixing is achieved by end �xing lugs and through body mounting• Service connections are via inlet and outlet connectors• Product independently tested to BS 5733• Requires a separate mains lead or connecting lead• Dedicated earth sockets for clean UPS and controlled power supply situations• Switch and anti surge fuse assemblies



Build it your way

Un

der D

esk

86 www.cmd-ltd.com

power and data module Power Master

2 Power , 2 Data with VGA & Mini Jack

2 Power (removable front bezel)2 Power individually switched 2 Power with blanking plate


93T002 93T002GST 2x power, north facing, 500mm earth lead POA

93A305 93A305GST 3x power, north facing, 500mm earth lead POA

92A001 92A001GST 4x power, north facing, 500mm earth lead POA

98U076 98U076GST 2x power, north facing, 2x RJ45 CAT6 data sockets, 300mm earth lead with 3m data leads POA

98AV42278 98AV42278GST2x power, north facing, 2x RJ45 CAT6 data sockets, unshuttered, 1x VGA, 1x mini jack, 300mm earth lead with 3m data leads

POA

Please note that Cat 6 is backwards compatible. CMD cannot accept any responsibility or liability for providing category 6 performance in products supplied. We will however �t category 6 speci�cation components where speci�ed.

Make it your own!

Un

der

Des

k

87sales line: +44 (0)1709 829511

Sockets• Std UK 45° & 90°• Std UK fused 45° & 90° (3.15A

& 5A) • T-earth 90°• T-earth 90° fused (3.15A & 5A)• Round-earth 90°• Round earth fused 45° & 90° • 3.15A & 5A• French / Belgian• Swiss • American • Danish • Indian • IEC C13 & C19• German• Italian

Sockets• Std UK 45° & 90°• Std UK fused 45° & 90° (3.15A

& 5A) • T-earth 90°• T-earth 90° fused (3.15A & 5A)

Conti power and data module

Conti is a complete configurable desk power system, designed specifically to meet the increasing power and communication needs of the modern office. Modules have been designed with speed of installation and flexibility in mind. Its many unique design features enable a vast choice of power and data options to fulfil most specifications. A choice of either metal or plastic extrusion is available.




Manage your energy


In-feeds• Tap Offs• Hard Wired to mains cable (3 & 4

pole) in 1.5mm2, 2.5mm2 & 4.0mm2 • SY cable 1.5mm2 & 2.5mm2 • 16mm & 20mm Flexible conduit (i.e.

tap off) • Connector block 16A & 32A (for

self wiring) • 3 Pole Connector Panel mount (3 &

4 pole) • Neutrik Panel mount (20A & 32A)• GST/ST connectors

Data• RJ11 • RJ45 (Cat5e & Cat6) • LJ6C (telecom)

Protection • Std 13A mains fuse (10A & 13A) • MCB (various std ratings) - Grey,

White & Black shrouds available• RCD/RCBO (various std ratings) • Surge Filter • Mains conditioning filter • RFI filter

Other• USB • 3.5mm Audio • Phono Socket • SVGA • S Video • HDMI • Co Axial • 9 Pin ‘D Type’ • F Type Connector• BT Tel• RJ11 Tel Shuttered• RJ45 Cat5e• RJ45 Cat6• Ethernet BNC• Footprint (Page 103)

Switching• Neon indicator • Single pole (with & without neon) • Double pole (with & without neon)

Conduit• Metal• Nylon (Black) LSOH Polyamide

Construction• Plastic (89 Series)• Metal (86 Series)

Out-feeds• 3 & 4 Pole Connector

Un

der D

esk

88 www.cmd-ltd.com

47 m

m

59 mm

86 Series(Metal) 43

mm

60 mm

89 Series(Plastic)

power and data module Conti

GST Code Description MRP

Standard Earth

86KS01 Standard 5m 32A Unfused Tap Off BSX3325H, 13A Fuse, 4 UK sockets, end cap £89.94

86KS03 Standard 5m 32A Unfused Tap Off BSX3325H, 13A Fuse, switch, 4 UK sockets, end cap £93.93

86KS02 Standard 5m 32A Unfused Tap Off BSX3325H, 13A Fuse, 6 UK sockets, end cap £101.91

86KS04 Standard 5m 32A Unfused Tap Off BSX3325H, 13A Fuse, switch, 6 UK sockets, end cap £105.89

86KS05 Standard 5m 32A Unfused Tap Off BSX3325H, 16A 30m RCBO, 4 UK sockets, end cap £118.44

86KS06 Standard 5m 32A Unfused Tap Off BSX3325H, 16A 30m RCBO, 6 UK sockets, end cap £130.41

Clean Earth

86KC01 Clean Earth 5m 32A Unfused Tap Off BCX4325H, 13A Fuse, 4 UK sockets, end cap £104.26

86KC03 Clean Earth 5m 32A Unfused Tap Off BCX4325H, 13A Fuse, switch, 4 UK sockets, end cap £108.24

86KC02 Clean Earth 5m 32A Unfused Tap Off BCX4325H, 13A Fuse, 6 UK sockets, end cap £116.22

86KC04 Clean Earth 5m 32A Unfused Tap Off BCX4325H, 13A Fuse, switch, 6 UK sockets, end cap £120.21

86KC05 Clean Earth 5m 32A Unfused Tap Off BCX4325H, 16A 30m RCBO, 4 UK sockets, end cap £132.76

86KC06 Clean Earth 5m 32A Unfused Tap Off BCX4325H, 16A 30m RCBO, 6 UK sockets, end cap £144.73

Please note: See page 116 for information on CMD tap offs.

Construction:

Note: We only supply mains fuse holders in black and white. If you require your Conti unit to be colour matched in grey our MCB is available in grey and white and is a good alternative to our fuse holder – please ask for details. HDMI: CMD cannot accept any responsibility or liability for providing HDMI performance in products supplied over 10m in length.

Grey/Silver All BlackWhite/Silver

Un

der

Des

k

89sales line: +44 (0)1709 829511


Pre-wired infeed with Betatrak Tap off

Flexibleinterconnecting module

Unique rotatingpower sockets

A selection of interchangeable modules

to meet the changing needs of your business

A choice of switching protection modules

Protection/Switching SocketsInfeed

Features include:

• 32A internal copper busbar

• 360O rotatable sockets.• Easy �t modular

system• Integrated power and

data• Quality manufacture

and testing (Kite Mark & BSI Certi�ed to BS5733)

• Standard, low noise / clean earth and dual circuit options

• 32A system conforms to BS7671: 2008 section 543.7 for high protective conductor currents

• Can be used to comply with BS6396: 2008

• Termination to other tap offs are available on request

Rotasoc® is widely considered to be the industry standard for customisable under desk power as it includes a comprehensive selection of multi-socket power and data modules with 360° rotatable socket outlets, available in 32 & 16 Amp versions.

Interconnect

Un

der D

esk

90 www.cmd-ltd.com


When connecting modules together, ensure that the coloured busbar shields are colour matched and correctly aligned. Do not connect modules if shields are of different colours.

Coloured busbar shield systemStandard system Clean system Dual system

White White Red Red Red White

Step 2 Protection/SwitchingA variety of protection/switching modules are available

Step 3 Sockets32A and 16A modules are available with 2, 3 or 4 sockets

Step 5 DataChoose data and complete your system with an end cap

Step 4 Flexible InterconnectFlexible interconnect modules are available in different lengths

Step 1 InfeedNote: Some 16A infeed may include protection/switching

Build your own system in 5 easy steps..

Please see page 72 and 73 for our range of on desk Rotasoc modules.

Un

der

Des

k

91sales line: +44 (0)1709 829511

standard system

Code 16 Amp Infeed 2P+E MRP

RAB201 16A Rewirable Infeed Module Non-Switched/Non-Fused Standard £6.56

RAB202 16A Rewirable Infeed Module Neon Indicator Standard £8.54

RAB203 16A Rewirable Infeed Module Neon Switch/Non-Fused Standard £8.23

RAB204 16A Rewirable Infeed Module Neon Switch /6.3A Fused Standard £10.90

RAB205 16A Rewirable Infeed Module 6.3A Fused Standard £8.45

RAB003 16A Infeed Module Non-Switched/Non-Fused c/w 3m lead and 13A BS1363 Plug Standard £12.91

RAB005 16A Infeed Module Non-Switched/Non-Fused c/w 5m lead and 13A BS1363 Plug Standard £14.75

RAB007 16A Infeed Module Neon Indicator c/w 3m lead and 13A BS1363 Plug Standard £15.14

RAB009 16A Infeed Module Neon Indicator c/w 5m lead and 13A BS1363 Plug Standard £16.98

RAB011 16A Infeed Module Neon Switch/Non-Fused c/w 3m lead and 13A BS1363 Plug Standard £14.89

RAB013 16A Infeed Module Neon Switch/Non-Fused c/w 5m lead and 13A BS1363 Plug Standard £16.66

RAB015 16A Infeed Module Neon Switch /6.3A Fused c/w 3m lead and 13A BS1363 Plug Standard £18.33

RAB017 16A Infeed Module Neon Switch /6.3A Fused c/w 5m lead and 13A BS1363 Plug Standard £20.16

RAB019 16A Infeed Module 6.3A Fused c/w 3m lead and 13A BS1363 Plug Standard £15.30

RAB021 16A Infeed Module 6.3A Fused c/w 5m lead and 13A BS1363 Plug Standard £17.13

Code 32 Amp Infeed 2P+E MRP

RAB301 32A 2P+E Rewirable Infeed Module Standard £9.84

RAB111 32A Infeed Module c/w 3m 32A Unfused Metal Conduit Tap Off Betatrak PBSX3323H Standard £29.33

RAB112 32A Infeed Module c/w 5m 32A Unfused Metal Conduit Tap Off Betatrak PBSX3325H Standard £35.72

RAB113 32A Infeed Module c/w 3m 13A Fused Metal Conduit Tap Off Betatrak PBSX3133H Standard £31.40

RAB114 32A Infeed Module c/w 5m 13A Fused Metal Conduit Tap Off Betatrak PBSX3135H Standard £33.26

RAB115 32A Infeed Module c/w 3m 32A Unfused Nylon Conduit Tap Off Betatrak PBSX3323H/KNC Standard £29.33

RAB116 32A Infeed Module c/w 5m 32A Unfused Nylon Conduit Tap Off Betatrak PBSX3325H/KNC Standard £35.72

RAB117 32A Infeed Module c/w 3m 13A Fused Nylon Conduit Tap Off Betatrak PBSX3133H/KNC Standard £28.25

RAB118 32A Infeed Module c/w 5m 13A Fused Nylon Conduit Tap Off Betatrak PBSX3135H/KNC Standard £33.26

CMD Tap Off and Infeed 3 Gang Socket Module

Un

der D

esk

92 www.cmd-ltd.com

standard system

Code Switching/Protection Modules MRP

RAB401 BS1362 Fuse Protection Module Standard £10.51

RAB402 BS1362 Fuse and Switch Neon Protection Module Standard

£12.36

RAB403 BS1362 Fuse and Neon Protection Module Standard

£13.58

RAB404 32A Isolator Module Standard £23.10

RAB405 32A 30mA RCD Module Standard £33.32

RAB410 6A MCB Type "C" Protection Module Standard

£14.87


£14.87


£14.87

RAB440 32A MCB Type "C" Protection ModuleStandard

£14.87

RAB450 16A 30mA Residual Current Operated Circuit Breaker Type "C" Protection Module Standard

£45.24


£45.24


£45.24

RAB480 16A RFI Filter Module Standard POA

RAB490 32A RFI Filter Module Standard POA

Code Socket Modules MRP

RAB502 2 Gang Non-fused Socket Module Black Body Grey Sockets Standard

£11.13


£15.10


£19.08

RAB532 2 Gang 3.15A Individually Fused Socket Module Black Body Grey Sockets Standard

£13.56


£18.60


£23.82

RAB552 2 Gang 5A Individually Fused Socket Module Black Body Grey Sockets Standard

£13.44


£18.60


£23.82

Code Interconnects MRP

RAB703 0.3m 32A Male to Female Interconnecting Nylon Conduit Standard

£11.55

RAB705 0.5m 32A Male to Female Interconnecting Nylon Conduit Standard

£11.99

RAB710 1m 32A Male to Female Interconnecting Nylon Conduit Standard

£15.36


£17.63


£19.86


£22.10


£21.09

32 Amp 16 Amp


RAB603 0.3m 16A Male to Female Interconnecting Cable Standard

£8.37

RAB605 0.5m 16A Male to Female Interconnecting Cable Standard

£8.54

RAB610 1m 16A Male to Female Interconnecting Cable Standard

£9.79


£10.66


£11.53


£12.42


£13.29

standard system

Un

der

Des

k

93sales line: +44 (0)1709 829511

clean system

Code 32 Amp Infeed 2P+CE+E MRP

RAC301 32A 2P+CE+E Rewirable Infeed Module Clean £9.84

RAC111 32A Infeed Module c/w 3m 32A Unfused Metal Conduit Tap Off Betatrak PBCX4323H Clean £32.19

RAC112 32A Infeed Module c/w 5m 32A Unfused Metal Conduit Tap Off Betatrak PBCX4325H Clean £40.05

RAC113 32A Infeed Module c/w 3m 13A Fused Metal Conduit Tap Off Betatrak PBCX4133H Clean £31.01

RAC114 32A Infeed Module c/w 5m 13A Fused Metal Conduit Tap Off Betatrak PBCX4135H Clean £35.17

RAC115 32A Infeed Module c/w 3m 32A Unfused Nylon Conduit Tap Off Betatrak PBCX4323H/KNC Clean £32.19

RAC116 32A Infeed Module c/w 5m 32A Unfused Nylon Conduit Tap Off Betatrak PBCX4325H/KNC Clean £40.05

RAC117 32A Infeed Module c/w 3m 13A Fused Nylon Conduit Tap Off Betatrak PBCX4133H/KNC Clean £31.01

RAC118 32A Infeed Module c/w 5m 13A Fused Nylon Conduit Tap Off Betatrak PBCX4135H/KNC Clean £35.17

Code 16 Amp Infeed 2P+CE MRP

RAC201 16A Rewirable Infeed Module Non-Switched/Non-Fused Clean £6.56

RAC202 16A Rewirable Infeed Module Neon Indicator Clean £8.54

RAC203 16A Rewirable Infeed Module Neon Switch/Non-Fused Clean £8.23

RAC204 16A Rewirable Infeed Module Neon Switch /6.3A Fused Clean £10.90

RAC205 16A Rewirable Infeed Module 6.3A Fused Clean £8.48

RAC003 16A Infeed Module Non-Switched/Non-Fused c/w 3m lead and 13A BS1363 Plug Clean £12.91

RAC005 16A Infeed Module Non-Switched/Non-Fused c/w 5m lead and 13A BS1363 Plug Clean £14.75

RAC007 16A Infeed Module Neon Indicator c/w 3m lead and 13A BS1363 Plug Clean £15.14

RAC009 16A Infeed Module Neon Indicator c/w 5m lead and 13A BS1363 Plug Clean £16.98

RAC011 16A Infeed Module Neon Switch/Non-Fused c/w 3m lead and 13A BS1363 Plug Clean £14.89

RAC013 16A Infeed Module Neon Switch/Non-Fused c/w 5m lead and 13A BS1363 Plug Clean £16.66

RAC015 16A Infeed Module Neon Switch /6.3A Fused c/w 3m lead and 13A BS1363 Plug Clean £18.33

RAC017 16A Infeed Module Neon Switch /6.3A Fused c/w 5m lead and 13A BS1363 Plug Clean £20.16

RAC019 16A Infeed Module 6.3A Fused c/w 3m lead and 13A BS1363 Plug Clean £15.30

RAC021 16A Infeed Module 6.3A Fused c/w 5m lead and 13A BS1363 Plug Clean £17.13

RCBO Protection Module Flexible Interconnect

Un

der D

esk

94 www.cmd-ltd.com

clean system


RAC401 BS1362 Fuse Protection Module Clean £10.51

RAC402 BS1362 Fuse and Switch Neon Protection Module Clean

£12.36

RAC403 BS1362 Fuse and Neon Protection Module Clean

£13.58

RAC404 32A Isolator Module Clean £23.10

RAC405 32A 30mA RCD Module Clean £33.32

RAC410 6A MCB Type "C" Protection Module Clean

£14.87


£14.87


£14.87


£14.87

RAC450 16A 30mA Residual Current Operated Circuit Breaker Type "C" Protection Module Clean

£45.24


£45.24


£45.24

RAC480 16A RFI Filter Module Clean POA

RAC490 32A RFI Filter Module Clean POA


RAC502 2 Gang Non-fused Socket Module Black Body Red Sockets Clean

£11.13


£15.10


£19.08

RAC532 2 Gang 3.15A Individually Fused Socket Module Black Body Red Sockets Clean

£13.56


£18.60


£23.82

RAC552 2 Gang 5A Individually Fused Socket Module Black Body Red Sockets Clean

£13.44


£18.60


£23.82


RAC703 0.3m 32A Male to Female Interconnecting Nylon Conduit Clean

£11.55

RAC705 0.5m 32A Male to Female Interconnecting Nylon Conduit Clean

£11.99

RAC710 1m 32A Male to Female Interconnecting Nylon Conduit Clean

£13.12


£15.36


£17.63


£19.86


£22.10


RAC603 0.3m 16A Male to Female Interconnecting Cable Clean

£8.37

RAC605 0.5m 16A Male to Female Interconnecting Cable Clean

£8.54

RAC610 1m 16A Male to Female Interconnecting Cable Clean

£10.66


£11.53


£12.42


£13.29


£12.68

32 Amp 16 Amp

Un

der

Des

k

95sales line: +44 (0)1709 829511

dual system

Code 32A Infeeds 4P+E+CE MRP

RAD301 32A 4P+E+CE Rewirable Infeed Module Dual £12.45

RAD111 32A Infeed Module c/w 3m 28A Unfused Metal Conduit Tap Off Betatrak PBDX7283H Dual £48.97

RAD112 32A Infeed Module c/w 5m 28A Unfused Metal Conduit Tap Off Betatrak PBDX7285H Dual £66.15

RAD113 32A Infeed Module c/w 3m 32A Unfused Metal Conduit Tap Off Betatrak PBSX3323H+PBCX4323H Dual £54.29

RAD114 32A Infeed Module c/w 5m 32A Unfused Metal Conduit Tap Off Betatrak PBSX3325H+PBCX4325H Dual £68.54

RAD115 32A Infeed Module c/w 3m 28A Unfused Nylon Conduit Tap Off Betatrak PBDX7283H/KNC Dual £48.97

RAD116 32A Infeed Module c/w 5m 28A Unfused Nylon Conduit Tap Off Betatrak PBDX7285H/KNC Dual £66.15

RAD117 32A Infeed Module c/w 3m 32A Unfused Nylon Conduit Tap Off Betatrak PBSX3323H+PBCX4323H/KNC Dual £54.29

RAD118 32A Infeed Module c/w 5m 32A Unfused Nylon Conduit Tap Off Betatrak PBSX3325H+PBCX4325H/KNC Dual £68.54

Code 16A Infeeds 4P+E+CE MRP

RAD201 16A Rewirable Infeed Module Non-Switched/Non-Fused Dual £8.85

RAD202 16A Rewirable Infeed Module 2 x Neon Indicator Dual £12.20

RAD203 16A Rewirable Infeed Module 2 x Neon Switch/Non-Fused Dual £11.56

RAD204 16A Rewirable Infeed Module 2 x 6.3A Fused Dual £14.17

RAD003 16A Rewirable Infeed Module Non-Switched/Non-Fused c/w 2 x 3m lead and 13A BS1363 Plug Dual £22.56

RAD005 16A Infeed Module Non-Switched/Non-Fused c/w 2 x 5m lead and 13A BS1363 Plug Dual £26.14

RAD007 16A Infeed Module 2 x Neon Indicator c/w 2 x 3m lead and 13A BS1363 Plug Dual £25.82

RAD009 16A Infeed Module 2 x Neon Indicator c/w 2 x 5m lead and 13A BS1363 Plug Dual £29.49

RAD011 16A Infeed Module 2 x Neon Switch/Non-Fused c/w 2 x 3m lead and 13A BS1363 Plug Dual £25.18

RAD013 16A Infeed Module 2 x Neon Switch/Non-Fused c/w 2 x 5m lead and 13A BS1363 Plug Dual £28.85

RAD015 16A Infeed Module 2 x 6.3A Fused c/w 2 x 3m lead and 13A BS1363 Plug Dual £27.78

RAD017 16A Infeed Module 2 x 6.3A Fused c/w 2 x 5m lead and 13A BS1363 Plug Dual £31.44


RAD401 2 x BS1362 Fuse Protection Module Dual £15.79

RAD402 2 x Switch Neon Module Dual £13.90

RAD403 2 x Neon Module Dual £11.93

RAD410 2 x 6A MCB Type "C" Protection Module Dual £30.03





RAD502 2 Gang Non-fused Socket Module - Black Body Grey Sockets Standard/Clean Bypass Dual £13.13



RAD512 2 Gang Non-fused Socket Module - Black Body Red Sockets Clean/Standard Bypass Dual £13.42



Un

der D

esk

96 www.cmd-ltd.com

dual system


RAD703 0.3m 32A Male to Female Interconnecting Nylon Conduit Dual

£15.52

RAD705 0.5m 32A Male to Female Interconnecting Nylon Conduit Dual

£18.26

RAD710 1m 32A Male to Female Interconnecting Nylon Conduit Dual

£23.51


£29.33


£35.20


£41.03


£46.88

Code Accessories MRP

RAZ001 End Cap £1.36

RAZ020 250mm x 4.0mm Earth Cable Kit c/w fixings for 32A Infeed £0.74

RAZ010 250mm x 1.5mm Earth Cable Kit c/w fixings for 16A Infeed £0.56

Code Data Communication Modules - Socket Connection MRP

RAF101 4 Way Communication Module 50/25mm Insert £3.83

RAF102 4 Way Communication Module 50/25mm Insert c/w conduit entry end cap £3.73

RAF107 4 Way Communication Module 37/22mm cut outs £3.40

RAF108 4 Way Communication Module 37/22mm cut outs c/w conduit entry end cap £3.32

Code Data Communication Modules - Stand Alone MRP

RAF210 4 Way Communication Module 50/25mm Insert £4.58

RAF211 4 Way Communication Module 50/25mm Insert c/w conduit entry end cap £4.58

RAF214 4 Way Communication Module 37/22mm cut outs £4.16

RAF215 4 Way Communication Module 37/22mm cut outs c/w conduit entry end cap £4.16

Code Socket Modules (cont) MRP

RAD532 2 Gang 3.15A Individually Fused Socket Module - Black Body Grey Sockets Standard/Clean Bypass Dual £15.43



RAD542 2 Gang 3.15A Individually Fused Socket Module - Black Body Red Sockets Clean/Standard Bypass Dual £15.71



RAD552 2 Gang 5A Individually Fused Socket Module - Black Body Grey Sockets Standard/Clean Bypass Dual £15.43



RAD562 2 Gang 5A Individually Fused Socket Module - Black Body Red Sockets Clean/Standard Bypass Dual £15.71




RAD603 0.3m 16A Male to Female Interconnecting Cable Dual

£11.53

RAD605 0.5m 16A Male to Female Interconnecting Cable Dual

£12.68

RAD610 1m 16A Male to Female Interconnecting Cable Dual

£14.36


£16.11


£17.09


£18.06


£19.84

32 Amp 16 Amp

Un

der

Des

k

97sales line: +44 (0)1709 829511


To fix modules to a surface:

• Flip up all rubber screw cover caps with a �at blade screwdriver

• Insert through all holes a No 8 pozi-pan screw or M4 bolt to the required length

• Tighten the screw/bolt down to the mounting surface.• Replace the rubber screw caps

To connect the Rotasoc modules:

Connection to be made by a competent person only.

1. Check that both male and female ends have the same colour coded busbar shields

2. Turn modules over and release the grey cam-lock lever with a small screwdriver into the upright position

3. Locate the male and female ends and push together until fully closed

4. Press the grey cam-lock lever over until �ush with the casing to lock the modules together

Clean Earth and fused options available

360o rotating sockets can be positioned as required


1

2

3

4

Un

der D

esk

98 www.cmd-ltd.com


117mm (36mm high) 95.3mm (33.1mm high)

79.3mm (56.1mm high) 162.5mm (81.6mm high)

44.8mm(35.7mm high)

44.5mm(35.7mm high)

131mm (32.9mm high)

190.9mm (32.9mm high)

250.8mm (32.9mm high)

32Amp Infeed Module 16Amp Infeed Module

BS 1362 Protection Module MCB, RCD Protection Module Protection Module

2 Gang Socket Module



24.5mm (31mm high)

End Cap

32Amp and 16Amp Filter Module

162.5mm (52mm high)

Flexible interconnect

162.2mm

171.7mm (41.3mm high)8.5mm

Data Module

Un

der

Des

k

99sales line: +44 (0)1709 829511

Cables & ConnectorsConnector system for use with power modules, giving quick and simple installation.

• 3 pole male and female pre-moulded connectors with 1.5mm2 cable up to 7m• Cable lengths over 7m are 2.5mm2 cable due to voltage drop• Available in black or white• Connectors comply with BS 5733• Separate system for dedicated power supplies can be supplied upon request

Starter Cable 13A UK Plug to Female 3 Pole Connector

Male 3 Pole Connector to Female 3 Pole Connector

Earth KitEarth leads can be provided for connection to the modules and for earth bonding between metal framed furniture,in accordance with BS 6396:2008 where relevant. These are available in a variety of lengths and terminations and consists of an earth cable, M5 ring terminal on both ends & screws.

Accessories power

Length ST Code Black ST Code White GST Code Black GST Code White MRP

1m 600001 600197 601110 601210 £8.37

1.5m 600002 600198 601115 601215 £8.86

2m 600003 600011 601120 601220 £9.23

2.5m 600004 600911 601125 601225 £9.90

3m 600005 600013 601130 601230 £10.20

3.5 600006 600912 601135 601235 £10.92

4m 600007 600669 601140 601240 £11.54

5m 600008 600566 601150 601250 £12.69

6m 600009 600599 601160 601260 £14.05

7m 600010 600918 601170 601270 £15.46

8m 600029 600919 601179 601280 £28.79

9m 600031 600920 601180 601290 £31.66

10m 600084 600910 600965 601299 £34.67

Length ST Code Black ST Code White GST Code Black GST Code White MRP

0.3m 620009 620018 620203 620303 £5.52

0.5m 620010 620019 620205 620305 £5.90

1m 620011 620020 620210 620310 £6.74

1.5m 620012 620021 620215 620315 £7.17

2m 620013 620022 620220 620320 £7.96

2.5m 620014 620023 620225 620325 £8.69

3m 620015 620024 620230 620330 £9.36

3.5m 620016 620025 620235 620335 £9.71

4m 620017 620026 620240 620340 £10.76

Length Code MRP

200mm 640199 £1.53

300mm 640200 £2.15

500mm 640201 £2.71

Accesso

ries

100 www.cmd-ltd.com

16 Series Self-Fit ConnectorsSuitable for terminating cables to produce mains or connector leads. We recommend that only the female is used for mains input lead applications. These connectors are rated at 16 Amps, we recommend that 1.5mm2

cable diameter is used for assembly purposes.

power Accessories

*Please note: subject to availability

Black White* MRP

160035 160400* £0.91

Self fitconnector

ST Code Black ST Code White GST Code Black GST Code White MRP

male 160054 160055 440119 440484 £4.59

female 160045 160049 440479 440542 £4.59

ST Code Black ST Code White GST Code Black GST Code White MRP

160004 160005* 161413 161414* £2.63

Mainssplitter

ST Code Black ST Code White* GST Code Black GST Code White MRP

standard 160008 160011* 161415 161416* £6.09

extended inheight**

160312 160009* 161417 161418* £6.09

Plug ST Code Black ST Code White* GST Code Black GST Code White MRP

male 160020 160021* 161419 161420* £0.46

female 160018 160019* 161421 161422* £0.46

16 Series Cable Locking Clip

16 Series Connector Blocks• 1 Male inlet to 1 Female outlet to connect modules together without a cable• 2 Connector blocks are required per connection• Colour options, black or white

16 Series Mains Splitter• 1 Male inlet to 3 Female outlets, with fixing lugs, black or white

**(to suit the self fit connectors)

16 Series Blanking Plugs

Fuses


440175 100 x 3.15A Fuses £50.68

440176 100 x 5A Fuses £50.68

Acc

esso

ries

101sales line: +44 (0)1709 829511

Power tower

Features include:

• Easy Installation - The Power Tower is pre-assembled so no additional wiring is required. Simply wheel the tower into place

• Power and Data - The Power Tower can be supplied with a choice of power and data sockets

• Socket Colour Options - Available in black, white and grey to compliment any modern working environment

• Comes with 2m mains lead to 13A plug and 2m data leads

Solid painted metal construction

Extruded metal structure for

various heights

A choice of power and data sockets

Solid base with casters to allow the tower to be

moved freely

Our new Power Tower is a versatile power and data module designed specifically for offices, commercial and educational environments that require a portable solution, providing power and data where it’s needed most.


87T002 Black 6 x power, 6 x RJ45 data CAT6 POA

87T003 White 6 x power, 6 x RJ45 data CAT6 POA

87T001 Grey 6 x power, 6 x RJ45 data CAT6 POA

New

Product Classification

Product Weight 12kg

Box weight (2 per box) 24kg

Box dimensions 1200mm x 500mm x 500 mm

Please note that Cat6 is backwards compatible. CMD cannot accept any responsibility or liability for providing category 6 performance in products supplied. We will however �t category 6 speci�cation components where speci�ed.

Portab

le Pow

er

102 www.cmd-ltd.com

ModulesGatewayDashboard

104 www.cmd-ltd.com

Footprint records energy usage and presents the information on the dashboard. You can view graphs, make comparisons, and create pdf or csv reports.

Analysis CostingEnter your own rates and Footprint will calculate the running or energy costs for all the equipment setup.

Footprint energy management

The footprint system helps identify ways of reducing power and saving money

105sales line: +44 (0)1709 829511

energy management Footprint

Modules DashboardAre built with intelligent smart meter technology, with each module recording the energy usage of any devices plugged in.

The dashboard can be accessed via any standard internet browser, so no requirement for any additional software.

ControlDifferent levels of control are available via the dashboard from full automation to manual overrides.

HIGHLY COMMENDED2012

106 www.cmd-ltd.com



The master socket remains ON at

all times and it is recommended

this socket is used for the PC

The gateway

The gateway is the link between the

power modules and the dashboard.

Transmitting data and sending

instructions

Smart meter

The smart meter is responsible for

recording the energy usage of connected

appliances

The auxiliary sockets can be controlled

via the dashboard and switched ON/OFF

either manually or automatically

107sales line: +44 (0)1709 829511

energy management Footprint

Dashboard licence fee:

Units Price

<100 £99*

101-250 £249*

251-499 £499*

500+ £1 per unit*

Code: FPLICENCE

The dashboard

Data is sent via the gateway and is displayed in

a user friendly format. The dashboard will allow

users to schedule, set thresholds, and control all

connected modules.

Extra One Off Charges:

Access up to 2 additional years of data - £99.00

Customisation for corporate branding & styling

purposes (simple logo change) - £250.00.

Further personalisation is available on request.

*Footprint is sold with a 12 month inclusive licence which includes access to & exporting of data together with technical support during of�ce hours. A renewal licence fee will be applicable after the 12 month inclusive period expires.

Build it your way

108 www.cmd-ltd.com

Footprint is a system that gives the user total control. Connecting appliances to the Footprint power module will allow users to collate energy usage data, monitor activity levels and schedule power.


The master socket is a uncontrolled outlet. The additional data obtained from this socket can be used to

control the auxiliary sockets depending upon the operational mode set. The in built smart meter measures

and transmits highly accurate consumption data which can then be reported on.

The master socket with built in smart meter technology1

The gateway

The Gateway is the hub of the system, employing the latest low power wireless technology, Zigbee®.

Zigbee® has been designed for wireless mesh networking enabling hundreds of devices to transmit

information to one another in real time. Due to its versatile nature, the mesh network also means that if

one device stops transmitting, the system will continue to operate.

2

The power module

The power module allows users to connect appliances, in order to make them smart as well as controllable.

Using the recognised low power wireless technology of Zigbee®, the power module communicates to the

Gateway allowing for energy monitoring and device control. The power modules are pre-con�gured to

connect to the Gateway with minimal consumer set-up. Zigbee® is the next generation global standard

for real time remote control and metering applications.

3

The dashboardThe control centre of operations, the Dashboard will allow different types of users to monitor activities

and get involved. The Dashboard will collect energy usage and display it as usable data in the form of

expenditure, CO2, and kWh used. Not only a monitoring tool, the Dashboard allows you to control the

entire system.

4

Audit

You now have the tools to show users their energy consumption

on an individual, department or �oor basis. This makes it easier

for users to take responsibility and ownership of their own

actions fuelling behavioural changes to take place.

Manage

With informed and evidence based data being available you

can improve your energy use.

Monitor

If you want to improve it, you �rst have

to monitor it. By seeing exactly how much

electricity is being consumed, it is easier to

introduce changes to make savings.

Target

When taking accurate readings, it is easier for

companies to benchmark a starting point and

then look to introduce appropriate targets to

measure the process being made.

109sales line: +44 (0)1709 829511


86E304 86E304GST 1 x power strip (Standard 1 x Master, 3 x Auxiliary Sockets) £184.71

support all the way Footprint

External Process CMD Process

Consultant & CMD have initial brie�ng meeting

Quotation Raised

CMD Site Visit.Survey of the of�ce space to make sure the correct equipment and setup is being provided.

Order placed & CMD prepareinstallation drawings &documentation needed

Hardware shippedto customer

Client outlines their requirements and provides drawings of of�ce plans to

CMD

Customer receiveshardware for installation

CMD �rst commission stage. Footprint units allocated to Gateways, Zones and Groups

Final commissioning. Customer training, Administrator

set up and project sign off

CMD provide continuous technical support:

+44 01332 [email protected]


161180 1 x gateway £615.70

How green

is your

of�ce?

CMD can make a difference by helping you to reduce your carbon footprint!

Our energy management range focuses on our intelligent Footprint units, which can monitor, control and consequently reduce energy usage, allowing the users to create reports, set targets, and make a real difference.

Our range of energy management tools put control of power directly in the hands of the user:

• Indicates the costs of running connected appliances• Controls connected appliances from one location• Monitoring and scheduling appliances can save you energy and money• No dedicated software installed on users PC’s

There’s never been a better time to show your commitment to the environment so why not give us a call today on +44 (0) 1709 829511, email us at [email protected] or visit our website at www.cmdfootprint.co.uk.

Underfloor PowerAccess PowerLighting Busbar

Un

der�

oo

r Pow

er

112 www.cmd-ltd.com

Betatrak® underfloor busbar

Slide and lock with positive latching

(prevents accidental disconnection)

32A Tap offs incorporate an unfused plug(fused available)

Various Tap off lengths available

16mmø metal flexible conduit as standard

(Black LSOH polyamide conduit available)

Colour coded for easy recognition

Low profile busbar

Busbars offer an efficient, flexible solution to underfloor power distribution as they use a click fit method for that fast and simple install. Due to no onsite commissioning and its ‘plug & play’ construction as all busbars are tested at our manufacturing facilities to reduce up front labour costs. Underfloor power solutions are also very low maintenance and exceptionally reliable making it the perfect solution in today’s modern construction world.

The benefits of using an Underfloor Power Distribution System• Choice: a comprehensive range of supply systems• Flexibility: can be used in new or existing layouts• Versatility: all kinds of configurations are possible including bends/corners• Safety: colour coded tap offs for easy recognition. Sliding dust covers to protect outlets • Height clearance: low profile busbar suitable for shallow floor voids• Convenience: variety of Betatrak® lengths and brackets with different socket centres. 300mm standard

(150mm and 600mm available on request)

The following versions are available for both Busbar and Tap Offs:• Standard Earth• Clean Earth (CE) Low Noise Earth• Dual Circuit• Auxiliary Earth• Three Phase

Un

der

�o

or

Pow

er

113sales line: +44 (0)1709 829511

Standard

White 63Amp

Clean Earth (CE)

(Low Noise Earth)

Red 63Amp

Dual Circuit

(Standard/Low Noise)

Green 63Amp

Auxiliary

Black63Amp

3 Phase

Blue63Amp

Length No of Sockets Centres(mm)

3.6m 12 300 PBST 3336 PBCT 4336 PBDT 6336 PBAT 3336 PBTT 5336




Feed Unit PBSF 3010/S PBCF 4010/S PBDF 6010 PBAF 3010/S PBTF 5010

Flexible Corner 1m PBSB 3031H/S PBCB 4031H/S PBDB 6031H PBAB 3031H/S PBTB 5031H

2m PBSB 3032H/S PBCB 4032H/S PBDB 6032H PBAB 3032H/S PBTB 5032H

Flexible Corner Kit PBSB 3000/S PBCB 4000/S PBDB 6000 PBAB 3000/S PBTB 5000

underfloor busbar Betatrak®

Busbar3m tap offs provide full coverage when busbar is laid out on 5m centres.

Floor BoxesTypical layout: 1 floor box for every 10m2

Typical Floor Layouts

PE N L3 L2 L1PE N LCE N L CE N1 L1 N2 L2N L

Betatrak® BST 3336

Betatrak® BST 3336

Betatrak® BST 3336

Area covered by tap off lead maximum lead

5 m

5 m

Betatrak® BST 3336

Betatrak® BST 3336

Betatrak® BST 3336

2.5 m

2.5 m

Un

der�

oo

r Pow

er

114 www.cmd-ltd.com

The 63A Betatrak® System caters for single phase standard, clean earth (CE) low noise, auxiliary, three phase or dual applications. Betatrak® comes in lengths of 1.2m, 1.8m, 2.4m or 3.6m with tap off positions provided at 300mm as standard or 150mm & 600mm (Note: 150mm & 600mm available on request). As a result, the system is extremely versatile and suitable for high to low density tap off requirements.

All integral connectors and tap off plug sockets are colour coded to avoid any possible errors during assembly. For maximum safety each operates a shutter on insertion to ensure no accidental contact can be made.

Installation

Betatrak® used within raised access �oors is normally arranged in parallel runs with the feed units to the Betatrak® orientated towards the incoming supply. This offers an economic format inherent in long straight runs. Spacing should be a maximum of 5 metres between each length of track and 2.5 metres from the perimeter when using a standard 3 metre tap off to a �oor box.

Attention should be given to the total power requirements to avoid exceeding the maximum power rating of the Busbar. This is based on the maximum power requirement for each �oor access box.

How to install the Busbar

Starting with the feed unit, remove the dust cover over the colour coded socket and simply snap the integral coupler, pre-installed on the busbar, into the feed socket. The next length of track is then �tted to the socket end of the �rst length of busbar as previously described, this is then repeated for the following lengths until the run is complete. On the �nal length of busbar section the dust cover supplied is �tted on the �nal unused coupling point to protect against the ingress of foreign contaminants. The feed unit is then secured via the slots in the base and the busbar every 1200mm (max) by using the mounting brackets provided.

CMD is registered by BSI to BS EN ISO 9001 & BS EN ISO 14001. Betatrak® is designed to comply with regulation 434.2 of BS 7671: 2008 (IEE Wiring Regulations) & 543.7 earthing requirements for the installation of equipment having high protective conductor currents.

The scope of Reg. 543.7.1.3 requires that every �nal circuit is intended to supply one or more items of equipment, where the total protective conductor current is likely to exceed 10mA. in normal use, shall have a high protective connection.

Betatrak® technical data

47mm End Feed (H)

300mm pitch

21mm (H)

47mm (H) with plug

40mm (H) with bracket

107mm (W) with fixing lugs

78mm (W) with bracket

Un

der

�o

or

Pow

er

115sales line: +44 (0)1709 829511

Electrical CharacteristicsRated Current 63 AmpsRated Voltage 240/415 VoltsFrequency 50 HzConditional Short Circuit Rating (Protection device Bs88 fuse) 16 KAMax withstand current 10 kA PeakShort time withstand current 1200A for 0.4 SecVolt Drops (Line & Neutral) Busbars 3.2 mV/A/m

Feed Unit 0.4 mv/ATrack Coupler 0.6 mV/A/mTap off Connection 0.5 mV/a+4mm2 Cable 11.00 mV/A/m+2.5mm2 18.00 mV/A/mFlexible Corner Unit 3.6 mV/A+10mm2 Cable (1.2m) 4.7 mV/A/m

Earth Fault Loop Impedance Line to Earth (Housing) 3.0 mΩ/mLine to Earth (Bar) 3.2 mΩ/mLine to Earth (Bar + Housing) 2.5 mΩ/mFeed Unit 0.8 mΩTrack Coupler 0.6 mΩTap off Connection 0.6 mΩ+4m2 Cable 11.0 mΩ/m+2.5mm2 & 4mm2 Cable 14.5 mΩ/mFlexible Corner Unit 4.0 mΩ+10mm2 Cable 4.7 mΩ/m

Mechanical DataNumber of Copper Conductors 2, 3, or 5Busbar Cross-section Area 14 mm2

Betatrak® Basing Copper Equivalent (Where casing is protective Earth) 14 mm2

Cable Termination Capacity 16 mm2

Tap off Cable 32A (BS 7211) 4.0 mm2

Tap off Cable 13A fused (BS 7211) 2.5 mm2

Tap off Conduit Sizes Ø16 or Ø20 mmFlexible Corner Unit Cable (BS 7211) 10 mm2

Flexible Interlink Conduit Ø25 mmFeed Conduit Entry 1 or 2 x Ø25 mmIP Rating BS EN 60529 4XMinimum void depth (track + tap off) 54 mmMaterial Speci�cationBetatrak® Casing Galvanised SteelBusbars High Conductivity CopperBusbar Insulators & Coupling Mould Flame Retardant PolycarbonateCouple Contacts CopperFeed Unit Terminals Brass Silver PlatedTap off Socket & Plug Mouldings Flame Retardant PolycarbonateTap off Shutter PolyesterTap off Plug Ins BrassTap off Cable LSOH BS 7211Flexible Corner Cable Tri Rated BS 6231Ambient Temperature Control FactorsTemperature 25C 30C 35C 40C 50CFactor 1.13 1.07 1.0 0.93 0.75

Betatrak product has been independently tested to comply with BS EN 60439-2 2000 & IEC 60439-2: 2000.The product is designed to conform to BS EN 61534-22.

technical data Betatrak®

Un

der�

oo

r Pow

er

116 www.cmd-ltd.com

Tap offs are colour coded and non-interchangeable between busbar types. The slide locking, positive latching tap off plug prevents accidental disconnection and can be added to or removed from the busbar while the system is live. All 3 metre, 32A tap offs incorporate an unfused plug, and as standard, 16mmØ metal �exible conduit enclosing 3 metres of 4mm2 cables. These units are designed to comply with Regulation 434.2.1 of BS 7671:2008. 5 metre unfused tap offs are also available for use with individual track runs that are rated at no more than 32A, where the protection of the tap off against both overload and fault current is provided by the track protective device.

CMD tap off units conform to the high integrity protective requirement by virtue of using a protective conductor of 4mm enclosed within a �exible conduit, thus providing additional protection against mechanical damage.

• Eliminates stretching problems• Returns to shape if crushed• Better fatigue life• Self extinguishing halogen free• Complies with BS EN61386 - conduit systems for

cable management• LSOH polyamide

Tap off solution

The bene�ts of using a CMD Tap off

• Choice: a comprehensive range of supply versions

• Flexibility: can be used in new or existing layouts• Safety: all units are designed to comply with

regulation 434.2.1 of BS 7671: 2008• Convenience: all tap offs are colour coded

& non-interchangeable with slide locking and positive latching to prevent accidental disconnection

Need a Non-metallic conduit solution for your tap off?

Our LSOH polyamide conduit could be the answer...

Colour Coded

Slide locking

Un

der

�o

or

Pow

er

117sales line: +44 (0)1709 829511

technical data Tap off32A 3 metre tap off

32A 3 metre tap off unit comprises of an unfused plug with 16mmØ �exible metal conduit with integral 3m x 4mm2 cables.

These units are designed to comply with regulations 434.2.1(i) BS 7671:2008 by virtue of the following:

1. Maximum length of cable is <3 metres.2. Minimum risk of faults as the item is

factory assembled and fully tested.3. Fully protected by �exible steel conduit

located within raised access �oor that offers further protection.

5 metre tap off unit

Tap off units in excess of 3 metres should only be used if they contain a fuse or the busbar is protected by a 32A rated protective device.

Mechanical data

Tap off cable 32A (BS 7211) 4.0 mm2

Tap off cable 13A fused (BS 7211) 2.5 mm2

Tap off conduit sizes Ø16 or Ø20 mm

Tap off socket & plug mouldings Flame retardant polycarbonate

Tap off shutter Polyester

Tap off plug pins Brass

Tap off cable LSOH BS 7211

Flexible corner cable Tri rated BS 6231

Mechanical data Track type Tap off type

Standard earthWhite 63 Amp

Auxiliary earth Black63 Amp

Clean earth (CE) (low noise earth) Red 63 Amp

3 phaseBlue63 Amp

Dual circuit(standard/low noise)Green63 Amp

PE N L3 L2 L1

PE N L

CE N L

CE N1 L1 N2 L2

N L

Tap off units

Standard earth Clean earth Dual circuit Auxiliary earth 3 phase

PBDX 7283H* PBTX 5283H**

PBSX 3323H PBCX 4323HPBSX 3323H

PBCX 4323HPBAX 3323H

BTX 3323H

1, 2 or 3



BTX 3133H

1, 2 or 3

PBDX 7283H* PBTX 5285H**



BTX 3325H

1, 2 or 3



BTX 3135H

1, 2 or 3

Socket key codes

3m unfused 28 Amp

3m unfused 32 Amp

3m fused 13 Amp

5m unfused 28 Amp

5m unfused 32 Amp

5m fused 13 Amp

All tap off units comply with 17th Edition Wiring Regulations Section 543.7 (High Integrity Earthing).

Numerous con�gurations of tap off units including fuse options are available on request. Longer lengths available on request. CMD tap off units conform to the high integrity protective requirement by virtue of using a protective conductor of 4mm enclosed within a �exible conduit, thus providing additional protection against mechanical damage.*These tap offs have 2 circuits (1 x standard & 1 x clean earth)**These tap offs are 3 Phase (L1, L2, L3, N, E)

Un

der�

oo

r Pow

er

118 www.cmd-ltd.com

Betatrak® underfloor busbar

PE N L

CE N L

N L


Betatrak

PBST3336 3.6 Metre Length £83.37




PBSF3010/S Feed Unit c/w End Stop £18.91

PBSB3000/S Flexible Corner Kit £61.15

PBSB3031H/S Flexible Corner - 1 Metre £96.30

PBSB3032H/S Flexible Corner - 2 Metre £115.54

Tap Offs

PBSX3323H 3 Metre Tap off 32A Unfused £28.07

PBSX3325H 5 Metre Tap off 32A Unfused £37.27

PBSX3133H 3 Metre Tap off 13A Fused £26.51

PBSX3135H 5 Metre Tap off 13A Fused £33.72

Standard Earth - 63Amp

Auxiliary Earth - 63 Amp

Clean Earth (CE) - 63 Amp


Betatrak

PBAT3336 3.6 Metre Length £93.09




PBAF3010/S Feed Unit c/w End Stop £20.18

PBAB3000/S Flexible Corner Kit £78.82

PBAB3031H/S Flexible Corner - 1 Metre £111.28

PBAB3032H/S Flexible Corner - 2 Metre £119.86

Tap Offs

PBAX3323H 3 Metre Tap off 32A Unfused £31.38

PBAX3325H 5 Metre Tap off 32A Unfused £43.80

PBAX3133H 3 Metre Tap off 13A Fused £29.20

PBAX3135H 5 Metre Tap off 13A Fused £36.47


Betatrak

PBCT4336 3.6 Metre Length £92.91




PBCF4010/S Feed Unit c/w End Stop £21.36

PBCB4000/S Flexible Corner Kit £68.04

PBCB4031H/S Flexible Corner - 1 Metre £117.64

PBCB4032H/S Flexible Corner - 2 Metre £121.40

Tap Offs

PBCX4323H 3 Metre Tap off 32A Unfused £32.18

PBCX4325H 5 Metre Tap off 32A Unfused £43.50

PBCX4133H 3 Metre Tap off 13A Fused £30.49

PBCX4135H 5 Metre Tap off 13A Fused £36.47

Un

der

�o

or

Pow

er

119sales line: +44 (0)1709 829511

underfloor busbar Betatrak®

PE N L3 L2 L1

CE N1 L1 N2 L2

Dual Circuit - 63 Amp

3 Phase - 63 Amp


Betatrak

PBDT6336 3.6 Metre Length £138.25




PBDF6010 Feed Unit c/w End Stop £32.12

PBDB6000 Flexible Corner Kit £92.63

PBDB6031H Flexible Corner - 1 Metre £155.84

PBDB6032H Flexible Corner - 2 Metre £174.28

Tap Offs

PBDX7283H 3 Metre Tap off 25A Unfused Dual Circuit £52.60

PBDX7285H 5 Metre Tap off 25A Unfused Dual Circuit £77.32


Betatrak

PBTT5336 3.6 Metre Length £122.83




PBTF5010 Feed Unit c/w End Stop £31.21

PBTB5000 Flexible Corner Kit £95.78

PBTB5031H Flexible Corner - 1 Metre £151.46

PBTB5032H Flexible Corner - 2 Metre £165.33

Tap Offs

PBTX3323H-1 3 Metre Tap off 32A Unfused £29.02

PBTX3325H-1 5 Metre Tap off 32A Unfused £40.19

PBTX3133H-1 3 Metre Tap off 13A Fused £27.05

PBTX3135H-1 5 Metre Tap off 13A Fused £37.08

NB: Add suf�x -1, -2 or -3 to indicate required phase con�guration of the above 3 Phase Tap Offs i.e; PBTX3323H-1

Non Standard Tap OffsCode Description MRP

Betatrak Non Standard Tap Offs 32A Neutrik Tap Offs

PPA8284 5m, 32A unfused, Std Earth tap off c/w 32A Neutrik (For Std earth & Std earth/607) £67.95

PPA7842 5m, 32A unfused, Std Auxiliary Earth Tap off c/w 32A Neutrik (For Std earth & Std earth/607) £68.15

PPA8306 5m, 32A unfused, Clean Earth Tap off c/w 32A Neutrik (For C/E & C/E 607) £73.82

Alphatrak Non Standard Tap Offs Standard Earth

PASX3323H 3 Metre Tap off 32A Unfused £41.43

PASX3325H 5 Metre Tap off 32A Unfused £59.74

Alphatrak Non Standard Tap Offs Clean Earth

PACX4323H 3 Metre Tap off 32A Unfused £47.61

PACX4325H 5 Metre Tap off 32A Unfused £68.95

Un

der�

oo

r Pow

er

120 www.cmd-ltd.com

Trunking shallow flush floor

Our access floor boxes are available for shallow screed trunking.

The underside of the box must be set lower into the floor to enable cables to pass under the socket outlet plates whilst maintaining lids to finish level with the screed.

The carpet trim and lid assembly are manufactured in a polycarbonate ABS moulding which has two individual hinged cable outlets coloured in dark grey. The lid is reinforced by a 3mm steel plate and has a carpet recess of 6.5mm.

NB This box is really a 4 compartment style with double width compartments. Utilise the 4 compartment accessory plates i.e you can �t two plates in the power compartment and one plate to the other two compartments.

Our Shallow Flush Floor trunking system has been designed for the distribution of and access to power and data services in screeded floors, particularly where flexibility in the positioning of access floor boxes are required.

Shallow Flush Floor Trunking System consists of three main elements;

• 2m trunking lengths with a range of junction units, bends and end stops.

• A shallow flush floor access box with an overall depth of 75mm. Boxes to be located at the end of trunking lengths.

• A wide range of power and data socket plates.

The trunking and accessories are manufactured in self-coloured pre-galvanised steel. The trunking is supplied in two metre lengths, complete with 2 x 1 metre lengths of lid secured by means of flush, all steel turnbuckle fasteners. Each length of trunking is supplied with one external fitting connector which are fully removable. Lids are manufactured from 3mm thick galvanised steel and it is recommended that the trunking is installed on a ribbon screed or similar to ensure support along the entire length. A comprehensive range of junctions, riser bends and sealing ends are available for use with the trunking.

2 Compartment Trunking (38/50mm x 150mm) 3 Compartment Trunking (38/50mm x 228mm)

flush flush

Access Floor Box

Anti-trip facility

2/3 Compartment

Self Closing Handle

Moulded polycarbonate ABS (RAL 7031)


PPS275G/SFT/382 Compartment 75mm x 150mm

38mm deep trunking �oor box£66.18







Un

der

�o

or

Pow

er

121sales line: +44 (0)1709 829511

shallow flush floor Trunking

Tee Junction Box Cross Junction Box Angle Junction Box Riser Bend (Back Entry)

Riser Bend End Cap


2 Compartment - 38mm x 150mm

PXFTTKG2/38/150 Flush Trunking 38mm x 150mm x 2m £142.67

PXFTRB/2/38/150 Flush Trunking Riser Bend 38mm x 150mm £50.36

PXFTRB238/150BE Flush Riser Bend (Back Entry) 38mm x 150mm £50.36

PXFTCON2/38/150 Flush Connector 38mm x 150mm £5.72

PXFTEC/2/38/150 Flush End Cap 38mm x 150mm £6.10

PXFTJBA2/38/150 Flush Angle Junction Box 38mm x 150mm x 75mm £62.38

PXFTJBT2/38/150 Flush Tee Junction Box 38mm x 150mm x 75mm £62.38

PXFTJBX2/38/150 Flush Cross Junction Box 38mm x 150mm x 75mm £62.38






















PXFTRB350/228BE Flush Connector 50mm x 228mm £8.01






Connector Plate

Un

der�

oo

r Pow

er

122 www.cmd-ltd.com

Access Floor Box

Our access floor boxes are available for flush floor trunking and come complete as a ‘frame & lid’ with a choice of accessory plates to suit your requirements. Our boxes are designed to fit into the trunking anywhere along the system layout excluding junction points.

Carpet trim and lid assembly are manufactured in a polycarbonate ABS moulding which has two individual hinged cable outlets coloured dark grey. The lid is reinforced by a 3mm steel plate. Carpet recess is 6.5mm.

Trunking flush floor

Choose from a wide selection of accessory

plates

3 compartment�oor boxes

Flush floor trunking is supplied in 2 metre lengths. 400mm lengths of removable lid are fitted which are interchangeable with an access floor box of the same length, thus giving the designer flexibility of positioning within a screeded floor installation.

• Lids are manufactured from 3mm thick galvanised steel which are fixed to the trunking body by countersunk zinc plated steel turnbuckle fasteners, providing speed of fitting by the installer and maximum rigidity of the finished product

• 2 or 3 compartments available

• It is advisable that all lid sections are fitted during screeding. This will prevent any slight inward movement to the sides of trunking body

Moulded polycarbonate ABS (RAL 7031)


PP22265G/FL

2 Compartment 65mm deep �oor box. This box is a 2 compartment. Utilise the 4 c ompartment accessory plates.

£44.86

PP22365G/FL

3 Compartment 65mm deep �oor box. This box is 3 compartment. Utilise the 3 compartment accessory plates.

£52.20

Cable retainer clips as standard

2 compartment�oor boxes

Un

der

�o

or

Pow

er

123sales line: +44 (0)1709 829511

flush floor Trunking

Riser Bend (Back Entry)

Riser Bend

End Cap

Trunking Components

Tee Junction Box

3 Compartment (360mm x 65mm)2 Compartment (235mm x 65mm)




PXFTRB/2/65/235 Flush Riser Bend 235mm x 65mm £49.98




PXFTJB/2/65/235 Flush Tee Junction Box 235mm x 65mm x 75mm £88.31



PXFTRB/3/65/360 Flush Riser Bend 360mm x 65mm £57.41




PXFTJB/3/65/360 Flush Tee Junction Box 360mm x 65mm x 75mm £98.43

Connector Plate

Un

der�

oo

r Pow

er

124 www.cmd-ltd.com

Trunking buried underfloor

Our buried underfloor trunking is designed for placing on the constructional concrete slab, to be completely covered when the final floor screed is laid and the service outlet positions fixed.

Our steel underfloor trunking is manufactured in 2 metre lengths with two or three compartments being the most commonly used.

The trunking lengths are a total welded construction with no need to couple together loose channel sections and each length is joined together by a saddle clamp and plate, which prevent any ingress of screed into the duct.

Buried Junction boxes

Junction boxes are supplied with flange couplers and blank plates to enable use as angles, tee or 4 way. Each box comes complete with fly-over for cable segregation. Junction boxes cannot be used to house sockets or data outlets. Carpet recess is 6mm.

Access Floor box

Our access floor boxes are available for buried underfloor trunking and come with a choice of accessory plates to suit your requirements.

Carpet trim and lid assembly are manufactured in a Polycarbonate ABS moulding which has two individual hinged cable outlets coloured dark grey. The lid is reinforced by a 3mm steel plate. Carpet recess is 6.5mm.

This box is really a 4 compartment style with a double width compartment for Power. Utilise the 4 compartment accessory plates i.e. you can �t two plates in the power side and one plate each in the other two compartments.

Tee Junction Box


PS99275G/FT/25 2 compartment 75mm deep �oorbox to suit 150mm x 25mm trunking £45.78





PXFTJB/2/25/GS Buried Junction Box 150mm x 25mm £84.29

PXFTJB/2/50 Buried Junction Box 150mm x 50mm £88.50

PXFTJB/3/25 Buried Junction Box 225mm x 25mm £87.19

PXFTJB/3/50/75 Buried Junction Box 225mm x 50mm £91.55

Un

der

�o

or

Pow

er

125sales line: +44 (0)1709 829511

buried underfloor TrunkingTrunking Components

Flat Bend

Riser Bend

Riser Bend (Back Entry)

End Cap

Connector Plate

2 Compartment Trunking (150mm x 50mm) 3 Compartment Trunking (225mm x 50mm)



PXFTTKG/3/50 Buried Trunking 225mm x 50mm x 2m £109.11

PXFTRB/3/50 Buried Riser Bend 225mm x 50mm £69.05

PXFTSU/3/50/100 Buried Step Down 225mm x 50mm £189.98

PXFTCONN/3/50 Buried Connector Plate 225mm x 50mm £10.68

PXFTRB/3/50/BE Buried Riser Bend (Back Entry) 225mm x 50mm £69.05

PXFTEC/3/50 Buried End Cap 225mm x 50mm £11.44

PXFTFB/3/50 Buried Flat Bend 225mm x 50mm £82.40


PXFTTKG/3/25 Buried Trunking 225mm x 25mm x 2m £102.24

PXFTRB/3/25 Buried Riser Bend 225mm x 25mm £67.52

PXFTCONN/3/25 Buried Connector Plate 225mm x 25mm £9.91

PXFTRB/3/25/BE Buried Riser Bend (Back Entry) 225mm x 25mm £67.52




PXFTTKG2/150/50 Buried Trunking 150mm x 50mm x 2m £93.08

PXFTRB/2/150/50 Buried Riser Bend 150mm x 50mm £65.04

PXFTCON2/150/50 Buried Connector Plate 150mm x 50mm £8.58

PXFTRB250/150BE Buried Riser Bend (Back Entry) 150mm x 50mm £65.04




PXFTTKG2/150/25 Buried Trunking 150mm x 25mm x 2m £81.64

PXFTRB/2/150/25 Buried Riser Bend 150mm x 25mm £61.04

PXFTCON2/150/25 Buried Connector Plate 150mm x 25mm £7.82

PXFTRB250/150BE Buried Riser Bend (Back Entry) 150mm x 25mm £61.04



Access Po

wer

126 www.cmd-ltd.com

• Self Closing

• Designed with ‘Anti-Trip’ facility

Robust cable outlet

Handle

• Blue/grey moulded polycarbonate ABS

Access �oor box colour

Access floor box

• Wide range of accessory plates

• Can be prewired with Betatrak tap offs

• Deeper versions available

• Quick removal with services fitted

• Installation tolerance of -0/+3mm

• Fixes to floor thicknesses of 15-50mm

Fully con�gurable �oor box

Fast �t advantages

One piece ‘fast fit’ (20 series)One piece back box

Individual ‘fast fit’ (20A series) Individual box bases for each compartment

Screed/Screw fixed/Stainless (99 series)Screed and stainless steel boxes available. Stainless suited for more prestigious spaces e.g. reception areas

Optional lockable lidAdded security allows access

by competent personnel

Acc

ess

Pow

er

127sales line: +44 (0)1709 829511

floor box Spares


Fast Fit Box Spares (Series 20 & 20A)

PPS2001G Lid & Trim Assembly £25.63

PPS2020/15 15mm Collar Assembly - add to 85mm box to make it 100mm £13.16



PPS2011G Cable Outlet Brackets - each £1.72

PPB4310 Cable Guides - each £1.72

PPB4159 Handle Assembly - each £2.06

PPS2030 Hinge Assembly (Pair) £1.37

Floor box Spares Screw Fix (Series 99)


PPS9002 Mounting Frame (25mm) £8.58





PPB4159 Handle Assembly - each £2.06

PPS2030 Hinge Assembly (Pair) £1.37

Screw Fix (Series 90)


Screw Fix (Series 93)


PPS9325 Box Base Assembly £12.02




PPB1111S Handle Assembly - each £0.40

PX16003 Handle Assembly - clips £0.12

PPS9030 Hinge Assembly (Left & Right Hinges & Screws - Pair) £0.91

Floor box Spares

ConduitsCode Description MRP

Metal Conduit

PX4023C 3 Metre x 20mm Metal Conduit c/w Glands £13.28




LS0H Polyamide Conduit

PX4123HCL 3 Metre x 20mm Low Smoke, Zero Halogen Polyamide Conduit c/w Glands £4.96




Access Po

wer

128 www.cmd-ltd.com

Our one piece 20 Series ‘Fast Fit’ access floor box has been designed to meet the demands of the modern day working environment.

One Piece floor boxes

Plug

Spa

ce

Sock

et S

pace

• Fast and simple tool free fixing mechanism

• Easy access for carpet fitting: the lid and trim is removed in seconds

• Quick release lid for easy access to accessory plates

• Can be pre-fitted with socket outlet and tap off unit

• Self closing lid

• Non-trip cable outlet brackets

• 3 and 4 compartment boxes are the same overall size. Compartment sizes:

� 3 compartment: 100mm x 175mm


Overall Depth Plug Space Socket Space

85mm 30mm 45mm

100mm 45mm 45mm

115mm 60mm 45mm

130mm 75mm 45mm


One Piece Unwired Floor box, Grey Trim

PP20385G Standard ‘Fast Fit’ 85mm deep £30.70

PP20310G Standard 'Fast Fit' 100mm deep £37.86



Add Suf�x /KL Additional overcost to �t a Key Lock to a �oor box lid £15.60

Deeper options available

350mm

332mm -0/+3 Cutout

200m

m -

0/+

3 C

utou

t

218m

m

3 CompartmentCode Description MRP


PP20485G Standard ‘Fast Fit’ 85mm deep £31.21




Add Suf�x /KL Additional overcost to �t a Key Lock to a �oor box lid £15.60

4 Compartment

Ove

rall

Dep

th

Acc

ess

Pow

er

129sales line: +44 (0)1709 829511

floor boxes One PieceOne Piece Prewired 85mm Deep Floor box, Grey Trim c/w following accessories and metal conduit tap off.


3m Standard Earth White Plug

P20385G/BS3U104 1 x Twin 13A Switched Socket £68.06

P20385G/BS3U207 2 x Twin 13A Switched Sockets £77.71

P20385G/BS3U113 1 x Twin 13A Switched RCD Socket £126.36

P20385G/BS3U221 2 x Twin 13A Switched RCD Sockets £193.95






3 Compartment 4 Compartment



Standard Earth One piece pre-wired �oor box c/w 32A unfused Betatrak tap off

Clean Earth One piece pre-wired �oor box c/w 32A unfused Betatrak tap off

Auxiliary Standard Earth One piece pre-wired �oor box c/w 32A unfused Betatrak tap off













3m Clean Earth Red Plug

P20385G/BC3U101 1 x Twin 13A Switched Socket £73.11

P20385G/BC3U205 2 x Twin 13A Switched Sockets £82.19

P20385G/BC3U110 1 x Twin 13A Switched RCD Socket £130.48

P20385G/BC3U220 2 x Twin 13A Switched RCD Sockets £198.07


















3m Auxiliary Earth Black Plug

P20385G/BA3U102 1 x Twin 13A Switched Socket £71.38

P20385G/BA3U203 2 x Twin 13A Switched Sockets £80.69

P20385G/BA3U105 1 x Twin 13A Switched RCD Socket £129.67

P20385G/BA3U206 2 x Twin 13A Switched RCD Sockets £197.28







3m Auxiliary Earth White Plug





5m Auxiliary Earth White Plug





Access Po

wer

130 www.cmd-ltd.com

Individual compartment floor box

Our individual 20A Series ‘Fast Fit’ access floor box has been designed to meet the demands of the modern day working environment. Separate removable compartments allow services to be removed whilst the floor box body and lid remain in situ.

• Last and simple tool free fixing mechanism



• Can be pre-fitted with socket outlet and tap-off unit


• Non-Trip cable outlet brackets

• 3 and 4 compartment boxes are the same overall size. Compartment sizes:



Deeper options available

Plug

Spa

ce

Sock

et S

pace


85mm 30mm 45mm

100mm 45mm 45mm

115mm 60mm 45mm

130mm 75mm 45mm

Ove

rall

Dep

th

350mm

332mm -0/+3 Cutout

200m

m -

0/+

3 C

utou

t

218m

m



PP20A385G Standard ‘Fast Fit’ 85mm deep £31.80

PP20A310G Standard 'Fast Fit' 100mm deep £41.30



Individual compartments 45mm deep

PPS2034A Single Width £4.30

PPS203D4A Double Width £5.44

Add Suf�x /KL Additional overcost to �t a Key Lock to a �oorbox lid £15.60

3 CompartmentCode Description MRP


PP20A485G Standard ‘Fast Fit’ 85mm deep £38.63




Individual compartments 45mm deep

PPS2044A Single Width £4.22

PPS204D4A Double Width £5.83

Add Suf�x /KL Additional overcost to �t a Key Lock to a �oorbox lid £15.60

4 Compartment

Acc

ess

Pow

er

131sales line: +44 (0)1709 829511

compartment floorbox Individual



P20A385GBS3U104 1 x Twin 13A Switched Socket £69.20

P20A385GBS3U202 2 x Twin 13A Switched Sockets £78.51

P20A385GBS3U108 1 x Twin 13A Switched RCD Socket £127.50

P20A385GBS3U209 2 x Twin 13A Switched RCD Sockets £195.10









Standard Earth One piece pre-wired �oor box c/w 32A unfused Betatrak tap off

Clean Earth One piece pre-wired �oor box c/w 32A unfused Betatrak tap off

Auxiliary Standard Earth One piece pre-wired �oor box c/w 32A unfused Betatrak tap off














P20A385GBC3U100 1 x Twin 13A Switched Socket £73.67

P20A385GBC3U204 2 x Twin 13A Switched Sockets £83.34

P20A385GBC3U103 1 x Twin 13A Switched RCD Socket £131.62

P20A385GBC3U206 2 x Twin 13A Switched RCD Sockets £199.22



















P20A385GBA3U101 1 x Twin 13A Switched Socket £72.52

P20A385GBA3U202 2 x Twin 13A Switched Sockets £81.83

P20A385GBA3U102 1 x Twin 13A Switched RCD Socket £130.82

P20A385GBA3U204 2 x Twin 13A Switched RCD Sockets £198.42

















Access Po

wer

132 www.cmd-ltd.com

Integral RCD/RCBO floorboxes

Our individual 20A Series ‘Fast Fit’ access floor box with integral Din Rail mounted RCD or RCBO protection has been designed to meet the demands of the modern day working environment. By using a modular breaker wired to normal sockets the need for expensive RCD sockets is removed. Separate removable compartments allow services to be removed whilst the floorbox body and lid remain in situ.

• Integral RCD/RCBO wired to normal sockets

• Fast and simple tool free fixing mechanism



• Can be pre-fitted with socket outlet and tap off unit


• Non-trip cable outlet brackets

Plug

Spa

ce

Sock

et S

pace


95mm 30mm 45mm

Ove

rall

Dep

th

350mm

332mm -0/+3 Cutout

200m

m -

0/+

3 C

utou

t

218m

m

Note:

• These boxes are 4 compartment but use the 1st compartment to house the RCD/RCBO.

• Removable compartments are double width for 1 twin socket and triple width for 2 twin sockets.

• Compartment sizes are 75mm x 175mm

Acc

ess

Pow

er

133sales line: +44 (0)1709 829511

RCD/RCBO floor boxes Integral

4 Compartment

4 Compartment

4 Compartment

Standard Earth Pre-wired �oor box c/w 32A unfused Betatrak tap off

Clean Earth Pre-wired �oor box c/w 32A unfused Betatrak tap off

Auxiliary Standard Earth Pre-wired �oor box c/w 32A unfused Betatrak tap off

Code Description RCD/RCBO MRP


P20A495GBS3U200 1 x Twin 13A Switched Socket 40A RCD £113.40

P20A495GBS3U308 2 x Twin 13A Switched Sockets 40A RCD £122.93

P20A495GBS3U207 1 x Twin 13A Switched Socket 20A RCBO £113.40

P20A495GBS3U301 2 x Twin 13A Switched Sockets 20A RCBO £122.93


P20A495GBS5U204 1 x Twin 13A Switched Socket 40A RCD £122.61

P20A495GBS5U305 2 x Twin 13A Switched Sockets 40A RCD £132.04

P20A495GBS5U203 1 x Twin 13A Switched Socket 20A RCBO £122.61

P20A495GBS5U304 2 x Twin 13A Switched Sockets 20A RCBO £132.04



P20A495GBC3U202 1 x Twin 13A Switched Socket 40A RCD £121.47

P20A495GBC3U302 2 x Twin 13A Switched Sockets 40A RCD £131.00

P20A495GBC3U203 1 x Twin 13A Switched Socket 20A RCBO £121.47

P20A495GBC3U303 2 x Twin 13A Switched Sockets 20A RCBO £131.00


P20A495GBC5U201 1 x Twin 13A Switched Socket 40A RCD £132.79

P20A495GBC5U301 2 x Twin 13A Switched Sockets 40A RCD £142.32

P20A495GBC5U202 1 x Twin 13A Switched Socket 20A RCBO £132.79

P20A495GBC5U302 2 x Twin 13A Switched Sockets 20A RCBO £142.32



P20A495GBA3U200 1 x Twin 13A Switched Socket 40A RCD £116.72

P20A495GBA3U300 2 x Twin 13A Switched Sockets 40A RCD £126.24

P20A495GBA3U201 1 x Twin 13A Switched Socket 20A RCBO £116.72

P20A495GBA3U301 2 x Twin 13A Switched Sockets 20A RCBO £126.24


P20A495GBA5U200 1 x Twin 13A Switched Socket 40A RCD £129.13

P20A495GBA5U300 2 x Twin 13A Switched Sockets 40A RCD £138.57

P20A495GBA5U201 1 x Twin 13A Switched Socket 20A RCBO £129.13

P20A495GBA5U301 2 x Twin 13A Switched Sockets 20A RCBO £138.57

Access Po

wer

134 www.cmd-ltd.com

1 compartment slab box with optional fixing feet can be used along with our range of floor grommets when budget control is top priority. The overall size of the unit is 175 x 75 x 40mm deep. The box base has a 20mm knock-out to allow conduit access and is manufactured from galvanised steel.

175 mm

75 m

m

Slab Box 1 compartment

0.9mm galvanised steel


1 Compartment Slab Boxes

PPS9014 75mm wide slab box - Loose Laid £5.19

PPS9014OS 75mm wide slab box c/w �xing feet £9.17

Standard Wired Con�gurations

Standard Earth

PPA7097/1 Slab Box c/w �xing feet, Twin Socket, 3m Tap off 32A Unfused Standard Earth £42.75

PPA7097/5 Slab Box c/w �xing feet, Twin Socket, 5m Tap off 32A Unfused Standard Earth £51.95

Clean Earth

PPA7097/3 Slab Box c/w �xing feet, Twin Socket, 3m Tap off 32A Unfused Clean Earth £46.87

PPA7097/6 Slab Box c/w �xing feet, Twin Socket, 5m Tap off 32A Unfused Clean Earth £58.18

Auxiliary Earth

PPA7097/12 Slab Box c/w �xing feet, Twin Socket, 3m Tap off 32A Unfused Auxiliary Earth £46.06

PPA7097/13 Slab Box c/w �xing feet, Twin Socket, 5m Tap off 32A Unfused Auxiliary Earth £58.48

Acc

ess

Pow

er

135sales line: +44 (0)1709 829511

2 compartment Slab Box2 compartment slab box with optional fixing feet can be used along with our range of floor grommets when budget control is top priority. The overall size of the unit is 181 x 198 x 50mm deep. The box base has 20mm and 25mm conduit knockouts in each short side and dividing fillets are provided to separate services. The box base is manufactured from galvanised steel. The slab box has provision to be able to add a 93 Series lid and mounting frame (sold separately) at a later date to enable use in a raised floor.

20/25mm Entries Knockouts

0.9mm Galvanised

Steel

198

mm

181 mm



PPS9325 2 Compartment 50mm deep slab box - loose laid £11.55

PPS9325OS 2 Compartment 50mm deep slab box c/w �xing feet £12.62

Standard Wired Con�gurations

Standard Earth

P9325OS/BS3U100 Slab Box c/w �xing feet, Twin Socket, 3m Tap off 32A Unfused Standard Earth £49.98

P9325OS/BS3U201 Slab Box c/w �xing feet, x2 Twin Socket, 3m Tap off 32A Unfused Standard Earth £75.56



Clean Earth

P9325OS/BC3U100 Slab Box c/w �xing feet, Twin Socket, 3m Tap off 32A Unfused Clean Earth £54.10

P9325OS/BC3U200 Slab Box c/w �xing feet, x2 Twin Socket, 3m Tap off 32A Unfused Clean Earth £63.40



Auxiliary Earth

P9325OS/BA3U100 Slab Box c/w �xing feet, Twin Socket, 3m Tap off 32A Unfused Auxiliary Earth £53.29

P9325OS/BA3U200 Slab Box c/w �xing feet, x2 Twin Socket, 3m Tap off 32A Unfused Auxiliary Earth £62.60



Access Po

wer

136 www.cmd-ltd.com

Slab Box 3 compartment

3 compartment slab box with optional fixing feet can be used along with our range of floor grommets when budget control is top priority. The overall size of the unit is 330 x 198 x 50mm deep. The box base has 20mm and 25mm conduit knockouts in each long side and dividing fillets are provided to separate services. The box base is manufactured from galvanised steel. The slab box has provision to be able to add a 99 Series lid and mounting frame (sold separately) at a later date to enable use in a raised floor.



PPS9035 3 Compartment 50mm deep slab box - loose laid £15.35


Standard Wired Con�gurations (add on required data plates)

Standard Earth





Clean Earth





Auxiliary Earth





198m

m

330mm

20/25mm Entries Knockouts

0.9mm Galvanised

Steel

Acc

ess

Pow

er

137sales line: +44 (0)1709 829511

4 compartment Slab Box4 compartment slab box with optional fixing feet can be used along with our range of floor grommets when budget control is top priority. The overall size of the unit is 330 x 198 x 50mm deep. The box base has 20mm and 25mm conduit knockouts in each long side and dividing fillets are provided to separate services. The box base is manufactured from galvanised steel. The slab box has provision to be able to add a 99 Series lid and mounting frame (sold separately) at a later date to enable use in a raised floor.



PPS9045 4 Compartment 50mm deep slab box £16.28


Standard Wired Con�gurations (add on required data plates)

Standard Earth





Clean Earth





Auxiliary Earth





0.9mm Galvanised Steel20/25mm Entries

Knockouts

198m

m

330mm

Access Po

wer

138 www.cmd-ltd.com

The 93 and 99 Series range of floorboxes are available for use as either a ‘stand alone’ screed floor type or a screw fixed type suitable for raised floors. Screed floor types are supplied with jacking legs which allow 10mm adjustment for levelling with the finished floor depth and also have taped seams to prevent ingress of screed.

• Quick release lid for easy access to accessory plate


• Non-Trip cable outlet brackets

Screed + screwfix floor boxes


PP93275GScrew Fix, 75mm deep Floor box, Grey Trim

£49.68

PPS93275GScreed Box, 75mm deep, Grey Trim - Adapted for Screed

£54.77

Self closing lid20/25mm entry

knockoutsCable protectors



£35.79


£41.62



£40.66


£45.77

Add Suf�x /KL

Additional overcost to �t a Key Lock to a �oor box lid

£15.60

93 Series 2 compartment 99 Series 3 compartment 99 Series 4 compartment

200m

m -

0/+

3 C

ut O

ut

212m

m

200m

m -

0/+

3 C

ut O

ut

218m

m

200m

m -

0/+

3 C

ut O

ut

218m

m

183mm -0/+3 Cut Out195mm



Acc

ess

Pow

er

139sales line: +44 (0)1709 829511

stainless steel Screed3 or 4 compartment stainless steel access floor box comprises of three distinct assemblies; the box base, the mounting frame and purpose made stainless steel frame/lid assembly. The box base has 20mm and 25mm conduit knockouts in each long side and dividing fillets that are provided to separate services. The box base is manufactured from galvanised steel and comes complete with a grid to accept interchangeable accessories.

The mounting frame is manufactured from galvanised steel and has two fixing holes in each long side. The frame/lid tray assembly is manufactured from brushed stainless steel with straight edges and cable outlet brackets in the same material. The recess in the tray lid is 23mm deep. Maximum outside size of S/S trim is 325mm x 193mm and overall box depth is 99mm. The box is provided with jacking legs for levelling and adjustment – Screed option only.

193m

m

325mm

cable outer frame

stainless steel tray lid

stainless steelsegregator frame

chrome ring pull (x2) supplied by cmd

for fitting by floor contractor

approx 30mm plugtop space due to final

lid adjustment

329.5mm levelling screws

99.5

mm

76.5

mm

spacer

accessory plate

20mm stone

3mm bedding


Screed and Screw�x Unwired Floor box,Stainless Steel Trim

PP90375SS/23 Screw �x 75mm deep £315.35

PPS90375SS/23 Screed 75mm deep £320.46

3 Compartment


Screed and Screw�x Unwired Floor box, Stainless Steel Trim

PP90475SS/23 Screw �x 75mm deep £316.42

PPS90475SS/23 Screed 75mm deep £321.53

4 Compartment

Access Po

wer

140 www.cmd-ltd.com

Select from our wide range of serviced power and unserviced data options. Accessory plates are common to most ranges - one piece, individual, screed and stainless floor boxes and slab floor boxes.All accessory plates are finished in light grey paint (RAL7035).

• Plate sizes - 100mm x 175mm • Can be only fitted in 3 compartment floor and slab boxes

1 twin RCD socket

Code Description

PP3291 3 Compartment Version

1 twin 13A switched socket

Code Description

PCP301 3 Compartment Version

1 twin 13A unswitched socket

Code Description


3 single 13A unswitched socket

Code Description


Plate pierced to accept 4 x LJ6C/RJ45 (Piercings 37.0 x 22.3)

Code Description

PV304 3 Compartment Version

Plate to accept 2 x LJ2 telephone outlets (Units 68mm Square)

Code Description


Standard BS 1363 2 gang piercing

Code Description

PM307 3 Compartment Version

Plate to accept 2 x standard 1 gang fittings (Units 86mm Square)

Code Description



Code Description


Angled plate pierced to accept 4 x LJ6C/RJ45 (Piercing 37.0 x 22.3)

Code Description

PDV397 3 Compartment Version

Plate pierced to accept 4 x RW Data/ Alphasnap Units (Piercings

48.0 x 23.5)

Code Description

PD3107 3 Compartment Version

Plate pierced to accept 2 x Euro (50mm x 50mm) Adapter Collars

Code Description


Accessories 3 compartment plates

Acc

ess

Pow

er

141sales line: +44 (0)1709 829511


PCP301 Twin Switched Socket Outlet £6.45

PCP302 Twin Unswitched Socket Outlet £6.30

PCP3003 Triple Unswitched Socket Outlet £11.12

PCP301C Clean Earth Twin Switched Socket Outlet £6.80

PCP302C Clean Earth Twin Unswitched Socket Outlet £6.69

PCP3003C Clean Earth Triple Unswitched Socket Outlet £11.58

PP3291 Twin RCD Socket £64.73

PP301N Twin Switched Socket Outlet Non-Std - Wandsworth £57.43

PP302N Twin Unswitched Socket Outlet Non-Std - Wandsworth £39.20

PP3424 Twin Unswitched 5A socket outlet £75.68

PB306 Blank Plate £1.44

PV304 4 No. RJ45 (37.1 x 22.3) £1.72

PV3004 4 No. RJ45 in line (37.1 x 22.3) £1.90

PDV397 4 No. Angled RJ45 £6.52

PV342 6 No. RJ45 (37.1 x 22.3) £1.83

PV388 8 No. RJ45 (37.1 x 22.3) £2.06

PD3107 4 No. R W Data RJ45 (47.0 x 23.5) £3.02

PD3137 4 No. R W Data RJ45 in line (47.0 x 23.5) £2.86

PV305 Plate pierced to accept 2 - LJ2 £3.09

PV311 Plate pierced to accept 2 No. 1- Gang Std BS1363 outlet £2.54

PM307 Plate pierced to accept 1 No. 2- Gang Std BS1363 outlet £2.54

PD308 Data Plate pierced to accept 2- 25 Pin Connectors £6.58

PD331 Plate pierced to accept 2 - Euromod Collars (not supplied) £2.06

PX3210 White LJU6C size blank data cover £1.02

3 compartment plates Accessories

Blank plate

Code Description

PB306 3 Compartment Version

Access Po

wer

142 www.cmd-ltd.com

Select from our wide range of serviced power and unserviced data options, 4 compartment range for one piece, individual, screed & stainless floor boxes & slab boxes 75mm wide. Can be fitted in 1, 2 and 4 compartment slab boxes and 2, 4 compartment floor boxes. All accessory plates are finished in light grey paint (RAL7035).

• Plate sizes - 75mm x 175mm

Sockets are available in clean earth versions. All twin sockets have a dual earth facility to enable compliance to BS 7671:2008 Regulation 543.7.1.4. If the accessory plate you require is not included in the most widely used selection as shown, please ring technical sales for further information.

NB. 3 & 4 compartment accessory plates cannot be mixed in boxes

1 twin RCD socket

Code Description

PP4291 4 Compartment Version

1 twin 13A switched socket

Code Description


1 twin 13A unswitched socket

Code Description


3 single 13A unswitched socket

Code Description



Code Description


Plate to accept 2 x LJ2 telephone outlets (Units 68mm Square)

Code Description


Blank plate

Code Description

PB406 4 Compartment Version


Code Description


Angled plate pierced to accept 4 x LJ6C/RJ45 (Piercing 37.0 x 22.3)

Code Description

PDV497 4 Compartment Version

Plate pierced to accept 4 x RW Data/Alphasnap Units (Piercings

48.0 x 23.5)

Code Description


Plate pierced to accept 2 x Euro (50mm x 50mm) Adapter Collars

Code Description


Accessories 4 compartment plates

Acc

ess

Pow

er

143sales line: +44 (0)1709 829511

4 compartment plates Accessories


PCP401 Twin Switched Socket Outlet £6.45

PCP402 Twin Unswitched Socket Outlet £6.30

PCP403 Triple Unswitched Socket Outlet £11.12

PCP401C Clean Earth Twin Switched Socket Outlet £6.80

PCP402C Clean Earth Twin Unswitched Socket Outlet £6.69

PCP403C Clean Earth Triple Unswitched Socket Outlet £11.58

PP4291 Twin RCD Socket £64.73

PP401N Twin Switched Socket Outlet Non-Std - Wandsworth £57.43

PP402N Twin Unswitched Socket Outlet Non-Std - Wandsworth £39.20

PP4424 Twin Unswitched 5A socket outlet £75.68

PB406 Blank Plate £1.44

PV404 4 No. RJ45 (37.1 x 22.3) £1.72

PV4004 4 No. RJ45 in line (37.1 x 22.3) £1.90

PDV497 4 No. Angled RJ45 £6.52

PV442 6 No. RJ45 (37.1 x 22.3) £1.83

PD4107 4 No. R W Data RJ45 (47.0 x 23.5) £3.02

PV405 Plate pierced to accept 2 - LJ2 £3.09

PD408 Data Plate pierced to accept 2- 25 Pin Connectors £6.58

PX3210 White LJU6C size blank data cover £1.02

Access Po

wer

144 www.cmd-ltd.com

Available in 2 sizes 127mm

& 210mm diameters

Cable hives are an alternative to floor boxes & slab boxes for taking underfloor power to under desk level. They offer an ideal solution for a fast, simple and unobtrusive installation. Easy to install and relocate if necessary, cable hives are ideal for use with our Conti power module, perfect for any office power requirements.

• Installed in less than 5 seconds – removed in less than 10 seconds (No tools required for fitting)

• Available in127mm and 210mm (Outside diameter: 140mm and 225mm respectively)

• Quality, reliability and safety come as standard

• Self closing lifting handles

• Manufactured from polycarbonate – ABS in standard grey (RAL7031)

• Fasteners will work on panel thickness of 5mm and upwards

• Panel cut out diameter: 127mm and 210mm

Cable Hives® power and data

Split lid option - Integral foam insert

for secure cable gripAccessible lid with retention cable

Hive colour - Polycarbonate ABS

Grey - RAL7031, (other colours

available, minimum quantity

requirements)

Lid Variations: Accepts up to

2 x 40mm flexible conduits

Soft & hard foam available

Interlocking clamp top

Maximum number of conduits accepted when lid is in place:Standard Cable Hive (127mm)

PPH261G (Hard Foam) PPHC261G (Soft Foam)

4 x 16mm 8 x 16mm

3 x 20mm 3 x 20mm

2 x 25mm 3 x 25mm

1 x 32mm 2 x 32mm

Simple access:

‘Push fit’ for fast installation

Unique self latching mechanism

Large Cable Hive (210mm)

PPG211G (Hard Foam) PPGC211G (Soft Foam)

10 x 16mm 16 x 16mm

6 x 20mm 9 x 20mm

3 x 25mm 5 x 25mm

3 x 32mm 3 x 32mm

Acc

ess

Pow

er

145sales line: +44 (0)1709 829511

Our angled standard RCD Cleaners Hive has been designed to allow the �tment of moulded 13A plug tops with strain relief without stressing the �ex hence its new angled design. Designed to power 230V vacuum cleaners.

Features:

• More robust• 35mm reduction in overall depth• Improved user functionality

Angled standard RCD cleaners hive

Reversible centre lid - 6mm carpet cut for improved installation aesthetics

Centre lid retainer - for added security. Eliminates lid loss

Hive colour - Grey, RAL7031

(other colours available)

Power sockets - Provide strain relief clearance for moulded plugs

power and data Cable Hives®

Access Po

wer

146 www.cmd-ltd.com

Large Cable Hive

Large Power Hive

Large Data Hive

Large Power & Data Hive

Cable Hives® range

Lid Body Cable Hive Complete

Lid Body Power Hive Complete2 x 13A Switched Sockets

Lid Body Data Hive Complete4 x RJ45 cut-outs

Lid BodyPower/Data Hive

Complete2 x 13A switched,4 x RJ45 cut-outs

Code Height Description MRP

PPG211G 40mm Large Cable Hive £20.53


PPG212G 107mm Large Power Cable Hive 2x Socket £38.68

PPG212G/RCD 107mm RCD Large Power Cable Hive 2x Sockets £90.41


PPG214G 107mm Large Data Hive c/w data box 4 x RJ45 £31.86


PPG215G 107mm Large Power/Data Hive 2x Socket & 4x RJ45 £48.56

PPG215G/RCD 107mm Large Power/Data Hive 2x Socket (RCD) & 4x RJ45 £107.98

Acc

ess

Pow

er

147sales line: +44 (0)1709 829511

Standard Cable Hive

Standard Cleaners Hive

Standard Power Hive

Standard Access Hive

Standard 2 Way Data Hive


PPH263G 76mm Standard Cleaners Hive £21.01

PPH263G/SW 105mm Cleaners Hive (Switched Plastic Moulded Socket) £27.16

PPH263G/5M 120mm Cleaners Hive (Angled 5A Unswitched moulded socket) £41.25

PPH263NG 76mm Cleaners Hive (Non Standard Unswitched Socket) £39.59

PPH263G/RCD/A 120mm Angled Standard RCD Cleaners Hive £82.92

range Cable Hives®

Lid Body Cable Hive Complete

Lid Body Cleaners Hive Complete13A Socket

Lid Body Power Hive Complete

Lid Body Access Hive Complete

13A Socket

Lid Body Data Hive Complete2 x RJ45 Cut-Outs


PPH261G 40mm Standard Cable Hive £16.45


PPH265G 93mm Standard Power Cable Hive £22.56


PPH264G 40mm Standard Access Cable Hive £12.04


PDH265G/245 93mm Standard 2 Way Data Hive £32.32

Access Po

wer

148 www.cmd-ltd.com

81mm aperture

101mm aperture

140mm

38mm

• ‘Fast-Fit’ installation from floor tile fixing to cable deployment

• Allows simple access for services underfloor to workstations of all kinds

• UL 94 VO Flame class rating

• Integral carpet gripper spikes

• Floor service unit conforms to IEC-61534-22

127mm

38mm

The grommet can simply be secured by pushing down into position

Can accommodate all cable types or 3 metal conduits up to a 25mm diameter or 4 x 20mm diameter

Manufactured from hard wearing durable flame retardant PC/ABS in Grey as standard (alternative colours available as special order)

Maximum number of conduits accepted when lid is in place.

Grommet standard cable (127mm)

Accommodates

all cable types

PC/ABS

(Grey as standard)

Push down - fast fixing

STANDARD CABLE GROMMET (127mm)

PCFG235G

8 x 16mm

4 x 20mm

3 x 25mm

2 x 32mm


PCFG235G 127mm Grommet £10.93

Acc

ess

Pow

er

149sales line: +44 (0)1709 829511

132mm

190mm aperture

230mm

42mm

210mm

40mm

• ‘Fast-Fit’ installation from floor tile fixing to cable deployment

• Allows simple access for services underfloor to workstations of all kinds

• UL 94 VO Flame class rating

• Floor service unit conforms to IEC-61534-22

• Recommended for installation in light traffic areas

• Integral carpet gripper spikes

The grommet can simply be secured by pushing down into position

Can accommodate all cable types or 5 metal conduits up to a 25mm diameter or 8 x 20mm diameter

Manufactured from hard wearing durable flame retardant PC/ABS in Grey as standard (alternative colours available as special order)

large cable (210mm) Grommet

Accommodates

all cable types

PC/ABS

(Grey as standard)

Push down - fast fixing

LARGE CABLE GROMMET 210mm)

PCFG238G

12 x 16mm

8 x 20mm

4 x 25mm

3 x 32mm

Maximum number of conduits accepted when lid is in place.


PCFG238G 210mm Grommet £16.54

Access Po

wer

150 www.cmd-ltd.com

Black Box™ DistributionFeatures:

• Compact aesthetic modular Power Distribution Unit (PDU) for the distribution of power within of�ce furniture installations

• Requires a separate connecting mains supply

• Incoming circuit protection device options by either a 32A RCD (overload protection up stream) or 32A RCBO

• Up to 8 outgoing circuits, individually protected by 6, 10 or 16 amp MCB’s, available in 4, 6 or 8 module variations

• Outgoing circuit connected from the PDU by Wieland ST18 or GST18 connectors in either 3 pole (Standard Earth) or 4 pole (Clean Earth)

• All MCB’s are accessible through a clear hinged cover which has the option of being lockable or accessible by the use of a tool only

• Stylish design, ideal for commercial of�ces, health care and education projects where the PDU may be sited in public accessible areas

• Products are CE Marked conforming to the requirements of BS5733

Black Box™ distribution


PDU8RCBO3P/16 PDU8RCBO3P/16GSTPower distribution box / 8 x Wieland outputs (Standard Earth)1 x RCBO / 8 x 16A MCBs £276.30



PDU8RCD3P/16 PDU8RCD3P/16GSTPower distribution box / 8 x Wieland outputs (Standard Earth)1 x RCD / 8 x 16A MCBs £276.30

PDU6RCD3P/16 PDU6RCD3P/16GSTPower distribution box / 6 x Wieland outputs (Standard Earth)1 x RCD / 6 x 16A MCBs £250.63

PDU4RCD3P/16 PDU4RCD3P/16GSTPower distribution box / 4x Wieland outputs (Standard Earth)1 x RCD / 4 x 16A MCBs £230.28

PDU8RCBO4P/16 PDU8RCBO4P/16GSTPower distribution box / 8 x Wieland outputs (Clean Earth)1 x RCBO / 8 x 16A MCBs £296.25



PDU8RCD4P/16 PDU8RCD4P/16GST16 Power distribution box / 8 x Wieland outputs (Clean Earth)1 x RCD / 8 x 16A MCBs £296.25




Acc

ess

Pow

er

151sales line: +44 (0)1709 829511

distribution Black Box™

20mm

Black Box can be mounted vertically or horizontally, to any wall or surface.

Black Box can be manufactured to house 4, 6 or 8 Wieland sockets with individual protection.

Neutrik socket

Transparent cover

MCB(6, 10 or 16 amp)

Stylish black case

Wieland outlets

Screw �xing holes

Incoming circuitprotection

270mm230mm

330mm

80m

m

100m

m

290mm

230mm190mm

200mm�g 1.

�g 2.

�g 3.

Ligh

ting

Bu

sbar

152 www.cmd-ltd.com

Aluminium housing

4 & 6 pole versions with tap offs on one side

Retaining spring on all

tap offs

Multi pole tap off

Degree of protection up to IP55

Ceiling bracket is available

reinforcement bracket is available

25A lighting busbar

L1 L2 L3 N L1 L2 L3 N L4L5

Our 25A range of lighting busbar is used mainly for overhead installation as it is suitable for all types of commercial & industrial lighting making it ideal for use in retail stores, of�ces and hotels due to its �exibility in creating speci�c lighting designs. The aluminium-clad trunking is available in 4 and 6 pole con�guration with tap off positions every metre along a standard 3m length. Simple to install, with no requirement for bolting lengths together, the range also incorporates a �exible corner to accommodate changes in height or direction.

General Construction - Strong extruded aluminium housing with rigid copper conductorsEnclose - Degree of protection to BS EN 60529 (IEC 60529); IP41 Standard; IP55 available on requestConductor Bars - Four and Six copper conductors (Protective earth conductor provided by the housing)Insulation - Tap off points are marked on the 25A lighting busbar with moulded internal polyester supporting the individual busbars - classi�ed �ammability grade UL-94 V-O

25A Busbar 4P+PE 25A Busbar 6P+PE

Compatible with our

lighting control systems

NEW

Lig

hti

ng

Bu

sbar

153sales line: +44 (0)1709 829511

lighting busbar 25A

25A Lighting Busbar Range

Code Description Weight Length Rating Outlets MRP

PNBA25A106 25A 6P+PE 1m 3-Phase or 3-Phase/DALI Lighting Busbar 0.7kg 1m 25A 1 POA

PNBA25A30 25A 4P+PE 3m 3-Phase Lighting Busbar 1.65kg 3m 25A 3 POA

PNBA25A306 25A 6P+PE 3m 3-Phase and DALI Lighting Busbar 2.1kg 3m 25A 3 POA

PNATSX25A 25A 4P+PE 3-Phase Left Hand End Feed 0.22kg 0.235m 25A N/A POA

PNATDX25A 25A 4P+PE 3-Phase Right Hand End Feed 0.38kg 0.235m 25A N/A POA

PNATSX25A6 25A 6P+PE 3-Phase and DALI Left Hand End Feed 0.538kg 0.365m 25A N/A POA

PNATDX25A6 25A 6P+PE 3-Phase and DALI Right Hand End Feed 0.85kg 0.365m 25A N/A POA

PNFLX25A4P0.5 25A 4 Pole 0.5M Flexible Corner Kit* 0.786kg 0.5m 25A N/A POA


End Feed Flexible Corner Kit Tap Off Rubber Joint Cover

Rubber End Cap Contact Carriers Light Fitting Bracket Wall/Ceiling Bracket

25A Lighting Busbars Accessories (Common to all lighting busbars)


PNSFIP Unwired 6A Fused 4 Pole Tap Off Phase Selectable c/w 2 contacts POA

PNSBM6A Unwired 6A Fused 6 Pole Tap Off Phase Selectable c/w 2 contacts POA


PNCTIP55 IP55 Rubber End Cap for Left Hand Feeds POA

PNCTIP55DX IP55 Rubber End Cap for Right Hand Feeds POA

PNGRIP55 IP55 Rubber Joint Cover POA

PNGRFP Busbar Joint Reinforcement Sleeve POA

PNCMCF 6.3A Fused Contact Carrier for 6A Tap Offs POA

PNCMCF16 16A Fused Contact Carrier for 16A Tap Offs POA

PNCMSF16 16A UnFused Contact Carrier for 16A Tap Offs POA

PNSTCWB Wall/Ceiling Steel Universal Bracket POA

PNSTCI Light Fitting Steel Bracket - 12Kg Max POA

PNSTLN Light Fitting Steel Bracket - 20Kg Max POA

*Supplied in kit form, which requires assembly

Ligh

ting

Bu

sbar

154 www.cmd-ltd.com

Aluminium housing

4 & 6 pole versions with tap offs on one side

Retaining spring on all

tap offs

Multi pole tap off

Degree of protection up to IP55

Ceiling bracket is available

reinforcement bracket is available

40A lighting busbar

L1 L2 L3 N L1 L2 L3 N L4L5

Our 40A range of lighting busbar is used mainly for overhead installation as it is suitable for all types of commercial & industrial lighting making it ideal for use in retail stores, of�ces and hotels due to its �exibility in creating speci�c lighting designs. The aluminium-clad trunking is available in 4 and 6 pole con�guration with tap off positions every metre along a standard 3m length. Simple to install, with no requirement for bolting lengths together, the range also incorporates a �exible corner to accommodate changes in height or direction.

General Construction - Strong extruded aluminium housing with rigig copper conductorsEnclose - Degree of protection to BS EN 60529 (IEC 60529); IP41 Standard; IP55 available on requestConductor Bars - Four and Six copper conductors (Protective earth conductor provided by the housing)Insulation - Tap off points are marked on the 40A lighting busbar with moulded internal polyester supporting the individual busbars - classi�ed �ammability grade UL-94 V-O

40A Busbar 4P+PE 40A Busbar 6P+PE

Compatible with our

lighting control systems

L1 N2 L2N1

40A Busbar Dual Circuit 4P+PE

Lig

hti

ng

Bu

sbar

155sales line: +44 (0)1709 829511

lighting busbar 40A

40A Lighting Busbar Range

40A Lighting Busbars Accessories (Common to all lighting busbars)

End Feed Flexible Corner Kit Tap Off Rubber Joint Cover

Rubber End Cap


PNSFIP Unwired 6A Fused 4 Pole Tap Off Phase Selectable c/w 2 contacts POA



PNCTIP55 IP55 Rubber End Cap for Left Hand Feeds POA

PNCTIP55DX IP55 Rubber End Cap for Right Hand Feeds POA

PNGRIP55 IP55 Rubber Joint Cover POA

PNGRFP Busbar Joint Reinforcement Sleeve POA

PNCMCF 6.3A Fused Contact Carrier for 6A Tap Offs POA

PNCMCF16 16A Fused Contact Carrier for 16A Tap Offs POA

PNCMSF16 16A UnFused Contact Carrier for 16A Tap Offs POA

PNSTCWB Wall/Ceiling Steel Universal Bracket POA

PNSTCI Light Fitting Steel Bracket - 12Kg Max POA

PNSTLN Light Fitting Steel Bracket - 20Kg Max POA

Contact Carriers Light Fitting Bracket Wall/Ceiling Bracket

Code Description Weight Length Rating Outlets MRP

PNBA40A106 40A 6P+PE 1m 3-Phase or 3-Phase and DALI Lighting 0.8kg 1m 40A 1 POA

PNBA40A10S2C 40A 4P+PE 1m Dual Circuit Lighting Busbar 0.7kg 3m 40A 3 POA

PNBA40A30 40A 4P+PE 3m 3-Phase Lighting Busbar 2.1kg 3m 40A 3 POA

PNBA40A30S2C 40A 4P+PE 3m Dual Circuit Lighting Busbar 2.1kg 0.235m 40A 5 POA

PNBA40A306 40A 6P+PE 3m 3-Phase and DALI Lighting Busbar 2.4kg 0.235m 40A 3 POA

PNATSX40A6 40A 6P+PE 3-Phase or 3-Phase and DALI Left Hand End 0.606kg 0.365m 40A N/A POA

PNATDX40A6 40A 6P+PE 3-Phase or 3-Phase and DALI Right Hand 0.58kg 0.365m 40A N/A POA

PNATSX40A6S2C 40A 6P+PE Dual Circuit Left Hand End Feed 0.606kg 0.34m 40A N/A POA

PNATDX40A6S2C 40A 6P+PE Dual Circuit Right Hand End Feed 0.58kg 0.34m 40A N/A POA



*Supplied in kit form, which requires assembly

Ligh

ting

Bu

sbar

156 www.cmd-ltd.com

Technical data 25A and 40A lighting busbar

Conformity IEC 439-2 EN 60439-2

25A 4 Pole 3m

25A 6 Pole 3m

25A 6 Pole 1m

40A 4 Pole 3m

40A 6 Pole 3m

40A 6 Pole 1m

Live conductors 4 6 6 4 6 6

Weight kg 1.55 1.65 0.7 2.1 2.5 0.9

Standard number of sockets3 (5 if dual)

3 13 (5 if dual)

3 1

Standard socket spacing mm 1000 1000 n/a 1000 1000 n/a

Non-standard number of sockets (Quantity dependant) 5/10 5/10 1 5/10 5/10 1

Housing thickness mm 0.8 0.8 0.8 0.8 0.8 0.8

Rate current In [A] 25 25 25 40 40 40

Frequency f [Hz] 50/60 50/60 50/60 50/60 50/60 50/60

Rated insulation voltage Ui [V] 660 660 660 660 660 660

Rated operation voltage Ue [V] 230/400 230/400 230/400 230/400 230/400 230/400

Protection degree / accessories IEC 592 IP41/55 IP41/55 IP41/55 IP41/55 IP41/55 IP41/55

Resistance 20O [mΩ/m] 6.8 6.8 6.8 3.0 3.0 3.0

Resistance 35O [mΩ/m] 8.3 8.5 8.5 3.8 3.8 3.8

Reactance Greq. H2 50 [mΩ/m] 0.21 0.22 0.22 0.19 0.19 0.19

Resistance 35O [mΩ/m] 7.2 7.2 7.2 4.0 4.0 4.0

PE Housing mm2 AL 100 100 100 100 100 100

L1, L2, L3, L4, L5, Cross section mm2 Cu 2.5 2.5 2.5 5.3 5.3 5.3

Joule losses I2 RW/m 3.8 3.8 3.8 5.8 5.8 5.8

Short circuit 3 phase kA 2.8 2.8 2.8 3.0 3.0 3.0

Voltage drop for 3-phase 50Hz current, in Volts per 100m and per ampere with loads distributed along the run. Voltage drop for single phase 50Hz current: divide these values by 0.866

For COS. Ø=0.8 0.68 0.25 0.59 0.25

For COS. Ø =0.9 0.76 0.29 0.66 0.29

For COS. Ø=1 0.83 0.31 0.72 0.31

Average loop resistance between live connectors

Rb1 ph ph OR ph N (at thermal stabilisation temperature 0 1) mΩ/m

16.66 16.66 16.66 7.10 7.10 7.10

Rb1 ph ph OR ph N (at conventional short circuit temperature) mΩ/m

20.90 20.90 20.90 8.52 8.52 8.52

Average loop reactanceXb ph ph mΩ/m 1.68 1.68 1.68 0.79 0.79 0.79

Xb ph N mΩ/m 2.08 2.08 2.08 0.83 0.83 0.83

Average loop resistance between live and PE conductors

Rb1 ph PE (at thermal stabilisation temperature 0 1) mΩ/m

9.08 9.08 9.08 3.81 3.81 3.81

Rb1 ph PE (at conventional short circuit temperature) mΩ/m

10.90 10.90 10.90 4.57 4.57 4.57

Average loop reactance Xb ph PE mΩ/m 1.3 1.3 1.3 1.28 1.28 1.28

IPK Ka 4.4 5.0 5.0 5.3 5.3 5.3

PT kA2 S 195.103 195.103 195.103 900.103 900.103 900.103

Temperature departing15O 20O 25O 35O 40O 45O

1.1 1.08 1.07 1 0.95 0.92

Control BoxesPre-fabricated WiringSensorsAccessories

158 www.cmd-ltd.com

The right amount of light

We understand the importance of getting your lighting right. The quality of arti�cial lighting is one of the most importance in�uences on performance in the work place - you need the right amount of lighting that works for every situation to maximise the potential for positive change.

Better control of lighting can reduce costs by 30-50%, and signi�cantly reduce carbon emissions at the same time, so long as the right decisions are made when selecting the lighting controls which is why over the next few pages we will guide you through the considerations and bene�ts to create an effective lighting control system to ensure it improves comfort, reduces maintenance costs and impart greater �exibility to the use of a workspace.

Did you know?

In the UK, lighting consumes around 58,000GWh each year which amounts to about 20% of the electricity generated. It is possible to cut your lighting bills by up to 50% by implementing energy saving measures like introducing daylight linking, presence detection, etc. Lighting in a typical of�ce costs about £3/m2 annually, but in the most ef�cient of�ce only costs about £1/m2. Lighting a typical of�ce overnight wastes enough energy to heat water for 1,000 cups of tea.*

CMD design and manufacture a comprehensive range of lighting control solutions. We can take a project from speci�cation to delivery on site - liaising with contractors, providing you with all the CAD support you will need to deliver and complete the project to your customer’s satisfaction.

So whatever the lighting project, let us handle the control aspect for you. *Source; Carbon Trust.

For the 30-50% energy savings*• directly and by reducing cooling loads

For the building management• gives �exibility• futureproofs against layout changes

For the building owner• reduces wiring costs• eligible for enhanced capital allowance• modular scheme• less onsite commissioning

For the building user• provides local control• improves working environment

For Building Regulations Compliance• By energy saving legislation, such as

Part L2A & L2B 2010 in UK

Making the most of lighting control

Why choose a lighting control system?

159sales line: +44 (0)1709 829511

The real cost of inef�cient lighting

It’s well known that lighting accounts for around 20% of a business’s energy costs, or put another way, that’s nearly a �fth of a typical electricity bill (source: Carbon Trust).

New research has found up to 40% of businesses’ electricity bills is spent on inef�cient lighting. Take a look at some examples where lighting can become an unnecessary cost to your business;

• Lights are left on when they’re not needed. A typical of�ce is only occupied between 25-30% of the week;• If a building is lit constantly around the clock that equates to a staggering 70-75% energy wastage – or around

10% of your overall electricity bill;• No lighting control system has been installed, or if one has, it hasn’t been programmed to supply light only when

needed;• An older lighting management system is in place.

Here are some simple but effective tips to cut down on electricity bills can be implemented: • Reduce heat loss by installing automatic doors• Replace out of date and inef�cient lighting with long-lasting, quality LEDs• Ensure all electrical equipment is turned off when not in use• Make sure display lighting is up-to-date• Check that the controls for heating and cooling at are the correct setting

Example application - Open plan of�ce

1000m2 Electronic T5 �uorescent lighting, 33% of area daylight in�uenced.

Lighting control equipment & installation cost £12,605 £15,730 £17,583

Lifetime (Years) 11.4 19.0 19.0

Energy Cost (£/Yr) £3,031 £1,846 £1,486

Total Annual Cost (£Yr) £4,135 £2,673 £2,410

Payback Period (Years) - 2.6 3.2

ManuallySwitched

AbsenceDetection

DaylightDimming

of lighting control Making the most

160 www.cmd-ltd.com

Ef�cient lighting tops the list of green technology investments in a new survey from the Carbon Trust. Over three-quarters of businesses polled (77%) said they invest in energy ef�cient lighting in the past year and energy metering, monitoring and targeting technology (57%).

96% of businesses surveyed said energy ef�ciency was an important consideration when purchasing or upgrading equipment and a good positive move is to introduce a lighting control system as it is a very effective way of demonstrating a strong sustainable commitment towards meeting legalisation or achieving guidelines and targets. We know that over 75% of lighting installations are thought to be out of date and unable to meet current design standards.

Invest in a sustainable future with efficient lighting

Energy is moneyOf�ce equipment is the fastest growing energy user in the business world, consuming 15% of the total electricity used in of�ces. This is expected to rise to 30% by 2020. (Carbon Trust)

The cost of running this equipment is around £300 million p.a. in the UK alone and this is increasing every year. (Carbon Trust)

Fact60% of UK employees now say it’s important to work for a company that has an active policy to reduce its carbon emissions. The survey was conducted amongst 1,217 employees across the UK by YouGov.

Meet your targetsEnsure your company meets current or future mandatory energy ef�ciency targets and/or the requirements of GHG emission reduction legislation.

Fax

Photocopier

Printers

Monitors

PCs

5%

13%

12%

30%

40%

Energy Spread in the Of�ce Equipment

161sales line: +44 (0)1709 829511

sustainable future with efficient lighting Invest in aMake the Switch

When considering a new lighting control, you may have to remind yourself and your client that the initial outlay to the project is not the only focus to consider, lifetime running costs of the project also has to be on the agenda. It does not matter how ef�cient a luminaire might be if its use is uncontrolled, there will be still be waste, avoidable costs and unnecessary CO2 emissions. Arti�cial lighting can be switched off or dimmed both when there is suf�cient daylight and when there is no one there to bene�t from its use. The economic bene�ts are the easiest to quantify, due to their tangible nature, savings on an electricity bill are relatively easy to calculate, but there are other bene�ts that may often be omitted.

Generally, we are quite good at switching lights on when we go into a room but less so at switching off when we leave, so introducing a good lighting control system brings in the controls to automatically reduce the light level and switches off when there is suf�cient daylight or when users leave the room.

Automatic lighting controls generally react to three main stimuli:

• Movement sensor - occupancy control• Time clock - timed schedule• Light sensor - daylight linking

162 www.cmd-ltd.com

Complete support service

A supporting CAD service for lighting control schematics.

In its simplest form our CAD designers are there as a support to ensure that the right lighting control solution is delivered to ensure you get the right light, in the right place, at the right time. Every step of the design process is handled with care from liaising with your clients, attending site meetings, regular reports with open lines of communication always at the forefront.

With nearly 30 years of experience working with well respected contractors and building services consultants to blue chip companies we pride ourselves on delivering the highest standards of work, supported by making the use of the latest technologies and ongoing staff training.

163sales line: +44 (0)1709 829511

support service Complete

Complete support service the stages explained CMD's design and planning services begin when the lighting control scheme and concept design has been approved, then our team will work closely with the appointed companies on the project.

• On-site pre-installation meeting can be arranged • CMD Installation Guides provide electricians with guidelines for an optimum install• Designers are on hand to guide you every step of the way • Creating the installation drawings of the highest quality• Designing and programming our ‘plug & play’ modules

164 www.cmd-ltd.com

Type of switching

Decide what kind of switching you want..

165sales line: +44 (0)1709 829511

The lights are switched on and off manually via the wall switch.

Ideal for use in locations like:

• Of�ces• Corridors • Storage areas

Presence Detectors

Presence Detectors are devices that detect the presence of someone in a speci�c area / place and then turn on the light and then off when the area is vacated. They are very commonly used for energy saving purposes even replacing the regular switches at times, and are ideal for public used venues.


Absence Detectors

Absence Detection detects not the presence of someone in the room, but the absence. They are usually “turned on” and then left to detect if someone is still in the room and switch on/off the lights.


• Of�ces• Industrial• Hospitals• Education• Public amenities• Hotels

of switching Type

• Of�ces• Hospitals• Public amenities• Circulation areas• Commercial

• Industrial• Education• Libraries• Hotels

Manual Switching

166 www.cmd-ltd.com

Making the most of Daylight with Automation

Daylight is the only freely available light source and yet all too often it is overlooked; well controlled daylight can provide a space with the best possible lighting effect with zero cost or CO2 emissions.

Daylight can be brought into spaces through roof lights, atria and light guidance systems as well as windows. Arti�cial lighting is still needed of course, but by ensuring it is linked to the daylight availability, it will be used most ef�ciently. Successfully managing the balance of natural and arti�cial light is key; whilst it is possible for arti�cial lighting to be completely off when there is suf�cient daylight in a space, consideration must be given to what happens when that changes; a sudden change of lighting level through the arti�cial lighting all coming on (or turning off) at once, creates distraction and discomfort. So arti�cial lighting should be dimmed to balance the daylight and deliver a constant light level for the users.

Automated functionality

We offer a number of solutions to automate making the most of natural light;

1. Daylight hold off - Through the use of a combined presence and daylight sensor the window row lights are automatically held off when daylight levels are bright enough to illuminate the portion of a room closest to the window(s). If the natural light level falls the sensor will switch the lights back on to compensate.

2. Daylight linked dimming - Through the use of a combined presence and daylight sensor the output of the window row lights is automatically adjusted in response to the changing daylight levels.

Our options

167sales line: +44 (0)1709 829511

Safety comes �rst

We all know that the safety maintenance of a building starts with good design but it would be fair to say that designers cannot be experts in all areas and once a project gets to the construction phase it is usually too late to start incorporating modi�cations to facilitate maintenance without incurring signi�cant costs. With the lifetime building maintenance costs anything up to 20 times the capital build costs, incorporating good low maintenance and safety facilities has to be a major priority.

Emergency Lighting has to be tested and monitored regularly by law. Our range of lighting controllers provide a variety of options for emergency testing & corridor hold options that can be controlled and performed at speci�c times or manually triggered.

In the UK all emergency lighting must:

• Give suf�cient light to allow any occupants to navigate their way out of the building to safety, should the mains lighting fail

• Identify and highlight location of �re �ghting equipment and call points/exits• Be capable of staying on continuously for 1 hour – although UK practice is 3 hours• Be tested regularly to ensure it’s in full working order and meets requirements• Allow processes to come to a safe conclusion

requirements Additional

Co

ntro

l Bo

xes

168 www.cmd-ltd.com

Features

• 4 Pole• One channel• 1-Way Manual Switching or Presence Detection• Optional Daylight Hold Off when used with PIR• 230v Switching• 1 luminaire output• No commissioning required• Lightweight Flame Retardant ABS Casing• 100% factory tested

Sirius local switch module (LSM)

Switching options available are:

• Manual Switching via a 1-way 230v wall switch• Presence detection via a 230v PIR• Presence detection as above with Daylight Hold Off (all lights)

Each LSM has four 4 Pole ports assigned as follows:

• 1x Unswitched in for the power in feed• 1x Unswitched out to enable other modules to be connected to the same circuit• 1x Switch port for a 230v wall switch or a 230v PIR• 1x Luminaire output

Mains In

Mains Out

Sirius standard switching con�gurations

For when you need a simple piece of kit to offer 1 Way Manual Switching, 2 Way Manual Switching or Presence Detection with the optional daylight hold off feature. All our switch modules are pre-wired and commissioned to eliminate any chance of wiring faults and can be changed or re-positioned without major disruption on site.

Co

ntr

ol B

oxe

s

169sales line: +44 (0)1709 829511

Technical Data

local switch module (LSM) Sirius

All 230v Switch Modules require a 4 core (live, neutral, earth and permanent live) feed to enable the module to function correctly.

• Each 230v 1-Way Switch Module has been provided with a port for the incoming unswitched feed and a port for the outgoing switched feed to the luminaires. Ports are also provided for both the outgoing unswitched feed so additional modules can be attached to the same circuit, and for the connection to the 230v 1-way wall switch or 230v PIR. Wieland GST 18i 4 Pole plugs are required to connect to these ports

• Each 230v 2-Way Switch Module has been provided with a port for the incoming unswitched feed and a port for the outgoing switched feed to the luminaires. Ports are also provided for two 230v wall switch drops. There is no facility for an unswitched feed to allow further modules to be attached to the same circuit. Wieland GST 18i 4 Pole plugs are required to connect to these ports

• When using a 1-Way Switch Module with multiple PIR’s a 230v 3-Way Circuit Splitter Module should be used to provide the additional ports needed

• When using a 2-way Switch Module with 3 or more switch points additional wall switches can be installed using a 230v Intermediate Switched T Piece

• If used the wall switch for a 230v Switch Drop must be a positive action switch

• The emergency test may take place at the distribution boards or via a local key switched T piece – there is no built in facility for testing the emergency live

Supply voltage: 230 Volts AC +10%/-6% 50Hz

Current Rating: 16Amp

Relay Rating: See the 230v PIR Data Sheet (available on request)

IP Rating: IP2X

Connection: Via Wieland GST 18i 4 pole female, male locking/latching type, complying with the requirements of BS EN 61535 : 2009

Operating temperatures: -5°C to 35°C

Sirius casings are manufactured from �ame retardant ABS.

All SIRIUS units are 100% factory tested. To ensure traceability all Sirius units are labelled with the date of testing and a unique serial number both of which are also recorded electronically.


P690803000.0 4 Pole Local Switch Module (Plastic) (1.5mm2) (Wall Switch or Presence) £21.70

P690804000.0 4 Pole 2 Way Switch Module (Plastic) (1.5mm2) £20.32

Co

ntro

l Bo

xes

170 www.cmd-ltd.com

Technical Data

• All BMB’s require a 4 core (live, neutral, earth and permanent live) feed to enable the unit to function correctly• Each BMB has been provided with a port each for the incoming and outgoing unswitched feed allowing further

modules to be attached to the same circuit. The following port con�gurations are used:• For the 1 Channel BMB nine (9) ports are provided for connection to the luminaires and one (1) port is provided

for connection to the 230v PIR or 230v Wall Switch Drop Lead• For the 2 Channel BMB eight (8) ports are provided for connection to the luminaires (four (4) per channel) and

one (1) port per channel is provided for connection to the 230v PIR or 230v Wall Switch Drop Lead• In all cases Wieland GST 18i 4 Pole plugs are required to connect to these ports• When using a BMB with multiple PIR’s a 230v 3-Way Circuit Splitter Module should be used to provide the

additional ports needed• If used the wall switch for a 230v Switch Drop must be a positive action switch

Supply voltage: 230 Volts AC +10%/-6% 50HzCurrent Rating: 16AmpRelay Rating: See the 230v PIR Data Sheet (available on request)IP Rating: IP2X

Connection Via Wieland GST 18i 4 pole female, male locking/latching type, complying with the requirements of BSEN 61535 : 2009.

Operating temperatures -5°C to 35°C

All PROXIMA casings are manufactured from a galvanised material equal to DX51D G275 in accordance with BS EN 10142:2000. External mounting �anges are �tted to allow quick and easy installation within the ceiling void.

All PROXIMA units are 100% factory tested. To ensure traceability all PROXIMA units are labelled with the date of testing and a unique serial number both of which are also recorded electronically.

Features

• One or Two Independent Channels• 1-Way Manual Switching or Presence Detection• Optional Daylight Hold Off when used with PIR• 230v Switching• 9 (one channel) or 8 (two channel - 4 per

channel) luminaire outputs• No commissioning required• Strong Steel Casing• 100% factory tested

Proxima basic marshalling box (BMB)

Our BMBs offer plug-in simplicity at the more affordable end of the spectrum. All our units provide a simple and quick install not only in terms of time but cost savings as well. Units are pre-wired and commissioned to eliminate any chance of wiring faults and can be changed or re-positioned without major disruption. Proxima is our basic unit for a low cost option for the connection of luminaires to either presence detectors or conventional switches with the added feature of optional daylight hold off.

Mains Out 4 pole connectors

Mains In

Switching port

Co

ntr

ol B

oxe

s

171sales line: +44 (0)1709 829511

basic marshalling box (BMB) Proxima


P692041000.0 1 Channel Basic Marshalling Box £70.89

P692043000.0 2 Channel Basic Marshalling Box £70.89


• Manually Switched via a 1-way 230v wall switch

• Presence detection via a 230v PIR.• Presence detection as above with Daylight Hold

Off (all luminaires).

(Manually Switched or Presence Detection Channels):

Each independent channel on this type of BMB has the following switching options:

• Manually Switched via a 1-way 230v wall switch

• Presence detection via a 230v PIR• Presence detection as above with Daylight Hold

Off (all luminaires)

Proxima types & standard switching con�gurations

Each PROXIMA unit is a 4 Pole One or Two Channel 230v Switching Module utilising either a 230v 1-Way Wall Switch or a 230v Combined Presence and Daylight Sensor to control the lights.

1 Channel 2 Channel

Co

ntro

l Bo

xes

172 www.cmd-ltd.com

Our CDBs offer the simplicity of a plug and play install saving valuable time on site and can be energy saving. All our units are pre-wired and commissioned prior to despatch to eliminate any chance of wiring faults and can be changed or re-positioned without major disruption. Rigel is the popular standard choice for connection of luminaries to either presence, absence or retractive switches with the added feature of SELV switching and optional daylight hold off.

Features

• One or two independent channels• Manual Switching, Presence or Absence Detection• Optional Daylight Hold Off when used with PIR• Flexible SELV Switching• 10 luminaire outputs (two channel – 5 per channel)• Built in emergency test facility• No commissioning required• Strong Steel Casing• 100% factory tested

Rigel circuit distribution box (CDB)

Mains In

Mains Out

Technical Data

• All CDB’s require a 4 core feed to operate correctly• Each CDB has twelve 4 Pole and three RJ45 ports assigned as follows:

* 1x 4 Pole Unswitched in for the power in feed* 1x 4 Pole Unswitched out to enable other modules to be connected to the same circuit* 1x RJ45 SELV Switch port for a SELV wall switch* 2x RJ45 SELV Switch ports for a SELV PIR* 10x 4 Pole luminaire outputs (split 5 to a channel for a 2 channel CDB)

• Multiple SELV switch points and/or PIR’s can be added with the use of additional RJ45 leads and/or RJ45 3-way splitters

• Multiple switches can be installed with the use of the same RJ45 SELV wall switch drop lead• If used the channel switches must be momentary push to make type switches• Emergency testing facility built in via a SELV wall switch (if required)

Conformity: Directive EMC 89/336/EEC Directive LVD 2006/95/EC Unit independently tested to comply with the requirements of: BS EN 60669-2-1:2004 BS EN 60669-2-3:1999 BS EN 55015:2006 BS EN 61000 series of standards for EMC compatibility

Supply voltage: 230 Volts AC +10%/-6% 50HzCurrent Rating: 16AmpRelay Rating: 16A resistive & incandescent 6A �uorescent 3A Compact �uorescent 3A Low Energy 3A Ventilation FansRJ45 Wiring: T568B CAT 5. 5/12v DC SELV

IP Rating: IP2X

Connection via Wieland GST 18i 4 pole female, male locking/latching type, complying with the requirements of BS EN 61535 : 2009

Operating temperatures -5°C to 35°C

All RIGEL casings are manufactured from agalvanised material equal to DX51D G275 in accordance with BS EN 10142:2000. External mounting �anges are �tted to allow quick and easy installation within the ceiling void.

All RIGEL are 100% factory tested. To ensure traceability all RIGEL are labelled with the date of testing and a unique serial number both of which are also recorded electronically.

Co

ntr

ol B

oxe

s

173sales line: +44 (0)1709 829511

(P1 - 1 Channel)Switching options available are:

• Presence Detection via a SELV PIR• Presence Detection with Daylight Hold Off (all

luminaires)

An override on facility is built in to this module(operated via an SELV Wall Switch) which will hold alllights on until released.

(P2 - 2 Channels)Each independent channel on this type of unit hasthe following switching options:

• Presence Detection via a SELV PIR• Presence Detection via a SELV PIR with Daylight Hold

Off (all luminaires on that channel only)

An override on facility is built in to this module (operated via a SELV Wall Switch) which will hold all linked channels on together until released.

This module may be used over two separate rooms/areas and 1 channel may operate in a different switching option to the other.

circuit distribution box (CDB) Rigel


P692050000.0 CDB P1 (1 Channel Presence and Daylight Hold Off) £227.04

P692051000.0 CDB P2 (2 Channel Presence and Daylight Hold Off) £227.04

P692052000.0 CDB A1 (1 Channel Absence and Daylight Hold Off) £227.04

P692053000.0 CDB A2 (2 Channel Absence and Daylight Hold Off) £227.04

RIGEL Types and standard switching con�gurations

Each RIGEL unit is a 4 Pole One or Two Channel SELV Switching Module utilising SELV Wall Switches and/or SELVCombined Presence and Daylight Sensors to control the lights.

(A1 - 1 Channel)Switching options available are:

• Manually switched via a SELV Wall Switch• Absence detection via a SELV Wall Switch and SELV

PIR• Presence detection as above with Day Light Hold Off

(all lights)

(A2 - 2 Channels)Each independent channel on this type of CDB has the following switching options:

• Manually switched via a SELV Wall Switch• Absence detection via a SELV Combined Presence

and Daylight Sensor• Absence detection as above with Day Light Hold Off

(all lights on that channel only)

An override on facility is built in to this module operated via an SELV Wall Switch).

This module may be used over two separate rooms/areas and 1 channel may operate in a different switching option to the other.

Presence Detection Absence Detection

Co

ntro

l Bo

xes

174 www.cmd-ltd.com

Canis lighting control module (LCM)

Features

• Two linked channels• Manual Switching, Presence or Absence Detection• DSI or Broadcast DALI• Can be used with dimmable and non-dimmable lights via the LCM’s integral relays• Daylight Linked and manual Dimming available• Dim down before switch off feature• Flexible SELV Switching• 8 luminaire outputs• Built in emergency test facility• No commissioning required – all LCM’s are factory pre-programmed• Strong Steel Casing• 100% factory tested

Each CANIS unit is a 6 Pole Two Channel SELV Switching Module utilising SELV wall switches and/or SELV Combined Presence and Daylight Sensors to control the lights.

8 luminaire ports

Switching portPIR Port

Mains outMains in

LCMs bring together the energy saving functionality of daylight linking where natural daylight is balanced with arti�cial lighting to not only reduce the energy required for lighting but making the most of the daytime light as well offering two linked channels. The units are simple to install and can be re-programmed as and when your needs may change in the future. The system can be used to control all types of lighting – �uorescent, low voltage and mains voltage and is the perfect solution for the connection of luminaries to either presence, absence or conventional switches with the added feature of daylight linked dimming and SELV switching.

Co

ntr

ol B

oxe

s

175sales line: +44 (0)1709 829511

lighting control module (LCM) Canis

Technical Data

• All LCM’s require a 4 core feed to operate correctly• Each LCM has two 4 Pole, 6 Pole and two RJ45 ports assigned as follows:

* 1x 4 Pole Unswitched in for the power in feed* 1x 4 Pole Unswitched out to enable other modules to be connected to the same circuit* 1x RJ45 SELV Switch port for a SELV wall switch* 1x RJ45 SELV Switch port for a SELV PIR* 8 x 6 Pole luminaire outputs (4 for channel 1, 4 for channel 2)

• Multiple SELV switch points and/or PIR’s can be added with the use of additional RJ45 leads and/or RJ45 3 way splitters

• Multiple switches can be installed with the use of the same RJ45 SELV wall switch drop lead• DSI LCM’s are designed to operate luminaires with Tridonic DSI ballasts and standard non-dimmable HF

ballasts – all non-dimmable ballasts will switch on/off via the LCM’s integral relays• DALI LCM’s are designed to operate luminaires with DALI ballasts and standard non-dimmable HF ballasts

– all non-dimmable ballasts will switch on/off via the LCM’s integral relays• All LCM’s are designed to control up to 20 ballasts per channel• If used the master wall switch must be a 2-way centre off momentary push to make rocker type switch.

This switch is used to manually dim the luminaires – pressing and holding the top of the switch will increase the output of the lights, pressing and holding the bottom of the switch will decrease the output of the lights. With absence LCM’s this switch is used to turn the LCM on

• If used the channel switches must be momentary push to make type switches• Emergency testing facility built in via a SELV wall switch (if required)


Supply voltage: 230 Volts AC +10%/-6% 50HzCurrent Rating: 16AmpRelay Rating: 16A resistive & incandescent 6A �uorescent 3A Compact �uorescent 3A Low Energy 3A Ventilation FansRJ45 Wiring: T568B CAT 5. 5/12vDC SELV

IP Rating: IP2X

Connection via Wieland GST 18i 4 pole female, malelocking/latching type, complying with therequirements of BS EN 61535 : 2009

Operating temperatures-5°C to 35°C

All CANIS unit casings are manufactured from a galvanised material equal to DX51D G275 in accordance with BS EN 10142:2000. External mounting �anges are �tted to allow quick and easy installation within the ceiling void.

All CANIS units are 100% factory tested. To ensure traceability all CANIS units are labelled with the date of testing and a unique serial number both of which are also recorded electronically.


CANIS Range - 8 Port 2 Channel DSI Dimming LCM's

P692070000.0 LCM P1 (DSI) £282.92

P692071000.0 LCM A2 (DSI) £282.92

P692072000.0 LCM W2 (DSI) £282.92

CANIS Range - 8 Port 2 Channel DALI Dimming LCM's

P692075000.0 LCM P1 (DALI) £282.92

P692076000.0 LCM A2 (DALI) £282.92

P692077000.0 LCM W2 (DALI) £282.92

Co

ntro

l Bo

xes

176 www.cmd-ltd.com

Canis lighting control module (LCM)

Manual Switching

Presence Detection

Absence Detection

CANIS Types and available standard switching con�gurations


• Manually Switched via a SELV Wall Switch. Manual dimming is available

Separate switches can be installed to enable the switching of each of the two channels; this could for example be used to allow the separate switching of the teaching wall lights in a classroom.

Manual dimming is available via the master wall switch.


• Presence Detection via a SELV PIR with Daylight Linked Dimming (all lights)• Presence Detection as above with the addition of SELV Wall switches to control each Channel and/or Manual

Dimming for all channels together

An override on facility is built in to this module (operated via a SELV Wall Switch) which will hold all linked channels on together until released.

Separate switches can be installed to enable the switching of each of the three channels; this could for example be used to allow the separate switching of the teaching wall lights in a classroom.

Manual dimming is available via the master wall switch.

Additionally a 10% dim down before switch off facility is built in to warn the occupants of a room that the lights are about to switch off (reactivation by triggering the sensor).


• Absence Detection via a SELV Wall Switch and a SELV PIR. Manual dimming is available• Absence Detection with Daylight Linked Dimming (window row(s) lights only)

Separate switches can be installed to enable the switching of each of the three channels; this could for example be used to allow the separate switching of the teaching wall lights in a classroom. Manual dimming is available via the master wall switch which is used to switch the LCM on and off.

Additionally a 10% dim down before switch off facility is built in to warn the occupants of a room that the lights are about to switch off (reactivation by triggering the sensor or by the SELV wall switch if the lights have been switched off).

Co

ntr

ol B

oxe

s

177sales line: +44 (0)1709 829511

lighting control module (LCM) Canis

Senso

rs

178 www.cmd-ltd.com

230v PIR sensor

• Presence Detection• Optional Daylight Hold Off• Pluggable – no onsite wiring required• 230v Switching• No commissioning required

230v Combined Passive Infra Red and Daylight Sensor

Each 230v Sensor is a multifunctional fully adjustable combined passive infra red and daylight (LUX) sensor.

• Sensitivity controls under removable bezel• Side mounted PIR or PIR/LUX selector switch• Integral securing wings ease for of installation• Lightweight Flame Retardant ABS Casing• 100% factory tested

Each PIR has 3 adjustment screws to allow the user to configure the PIR to suit the condition of the room it is installed in. Operating the following settings:


P699907000.0 Pluggable (Wieland) 230v Combined Presence and Daylight Sensor £74.26

LUX LevelThe point at which the PIR will either hold the luminaires off or begin to dim them (dependent on control module type) can be set by adjusting this control. The LUX level may be set between 200 and 2000 LUX.

Time DelayThe time that the PIR will hold the luminaires on before switching them off can be set between 15 seconds and 30 minutes.

PIR SensitivityThe range that the passive infra red sensor detects out to can be adjusted up to a maximum of 7 metres diameter (when installed at 2.4m height).

These sensors may be used with Sirius LSM’s and Proxima BMB’s.

Sen

sors

179sales line: +44 (0)1709 829511

PIR sensor 230V

Technical Data


Supply voltage: 230 Volts AC +10%/-6% 50HzCurrent Rating: 16AmpRelay Rating: 16A resistive & incandescent lighting 6A �uorescent 3A Compact �uorescent 3A Low Energy 3A Ventilation FansIP Rating: IP2X

Connection via Wieland GST 18i 4 pole female, male locking /latching type, complying with the requirements of BS EN 61535 : 2009. All connectors are designed to comply with IEC 61535 (ed.1): 2009-02.


Plastic PIR Casings are manufactured from �ame retardant ABS

All PIR’s are 100% factory tested. To ensure traceability all PIR’s are labelled with the date of testing and a unique serial number both of which are also recorded electronically.

Each PIR has a side selector switch which allows the user to configure the PIR for 1 of the following operational modes:

• PIR/LUX used for combined presence and daylight hold off.• LUX used if daylight hold off on its own is required.• PIR used if presence detection on its own is required.• The side selector switch must be set before the PIR is installed.

The adjustment screws are hidden to prevent being tampered with.

PIR Selector

Securing Wings

Senso

rs

180 www.cmd-ltd.com

12v Combined Passive Infra Red and Daylight Sensor

12V SELV Combined Passive Infra Red & Daylight Sensor (For RIGEL CDB’s & CANIS LCM’s)

• Presence Detection• Optional Daylight Hold Off• Pluggable – no onsite wiring required• Flexible SELV Switching• No commissioning required

• Sensitivity controls under removable bezel• Side mounted PIR or PIR/LUX selector switch• Integral securing wings ease for of installation• Lightweight Flame Retardant ABS Casing• 100% factory tested

Each PIR has 3 adjustment screws to allow the user to configure the PIR to suit the condition of the room it is installed in. Operating the following settings:


P699913000.0 Pluggable (RJ45) SELV Combined Presence and Daylight Sensor £85.79

12v SELV PIR sensor

LUX LevelThe point at which the PIR will either hold the luminaires off or begin to dim them (dependent on control module type) can be set by adjusting this control. The LUX level may be set between 200 and 2000 LUX.

Time DelayThe time that the PIR will hold the luminaires on before switching them off can be set between 15 seconds and 30 minutes.

PIR SensitivityThe range that the passive infra red sensor detects out to can be adjusted up to a maximum of 7 metres diameter (when installed at 2.4m height).

Sen

sors

181sales line: +44 (0)1709 829511

PIR Selector

Securing Wings

Technical Data

Conformity: Directive EMC 89/336/EEC Directive LVD 2006/95/EC Unit independently tested to comply with the requirements of: BS EN 60669-2-1:2004 BS EN 60669-2-3:1999 BS EN 55015:2006 BS EN 61000 series of standards for EMC compatibility Supply voltage: 12 Volts DCCurrent Rating: 16AmpRelay Rating: See RIGEL CDB or CANIS LCM Data Sheets (available on request)RJ45 Wiring: T568B CAT 5. 5/12vDC SELVIP Rating: IP2X

Connection via RJ45 male plugs


Plastic PIR Casings are manufactured from �ameretardant ABS

All PIR’s are 100% factory tested. To ensure traceability all PIR’s are labelled with the date of testing and a unique serial number both of which are also recorded electronically.

Each PIR has a side selector switch which allows the user to configure the PIR for 1 of the following operational modes:

• PIR/LUX used for combined presence and daylight hold off.• LUX used if daylight hold off on its own is required.• PIR used if presence detection on its own is required.• The side selector switch must be set before the PIR is installed.

Each 12v SELV Sensor is a multifunctional fully adjustable combined passive infra red and daylight (LUX) sensor.

The adjustment screws are hidden to prevent being tampered with.

SELV PIR sensor 12V

Senso

rs

182 www.cmd-ltd.com

Low Voltage microwave sensor

Low voltage (12v DC) microwave sensor(Compatible with RIGEL CDB or CANIS LCM)

Features

• 2 sensitivity settings• Mounted almost anywhere• Radar technology• Resistant to false detections via environmental

conditions• Detection range up to 12m

• No line of sight required like infra red (can be hidden behind wood, glass etc.)

• Minimal power required• Sensor allows 12V DC supply to be shared with

other devices


P69990200.00 Low Voltage Microwave Sensor £114.34

Time DelayThe time that the microwave will hold the luminaires on before switching them off can be set between 15 seconds and 30 minutes.

Microwave SensitivityThe range that the passive infra red sensor detects out to can be adjusted up to a maximum of 12 metres diameter (when installed at 2.4m height).

Sen

sors

183sales line: +44 (0)1709 829511

Technical Data

• CW RADAR, ISM BAND• Centre Frequency is 5.8GHz• Detection range is 12m at high sensitivity setting (installation dependent)• Three sensitivity settings available: low, medium and high• Current consumption of circuit is 40mA max. @12V DC• Output compatible with RIGEL CDB’s & CANIS LCM’s• Radiated microwave energy is 30uW typical

12m

2.4m

Detection Range

microwave sensor Low Voltage

Microwave Sensitivity Selector

Securing Wings

Pre-fabricated

Wirin

g

184 www.cmd-ltd.com

Pre-fabricated 4 pole accessories

Features

• Complete pluggable systems for 16A power and lighting applications

• 4 or 6 Pole leads, T Pieces and Splitters available as standard

• Non-interchangeability between lighting and power wiring systems

• 1.5mm2 LSOH as standard in 3, 4, 5 or 6 cores• Wieland GST 18i 4 and 6 Pole connectors used as

standard

• Starter Leads, Drop Leads and Extender Leads available• 4 and 6 Pole Fixed and Flying Luminaire T Pieces

available• 4 and 6 Pole 3 Way Circuit Splitters available• 6 Pole leads, T Pieces and Splitters are suitable for DSI

and DALI controllers• Power Switched and Unswitched Fused Spurs for FCU’s

etc.

4 pole Female Plugs - Plug 4 pole Female Plugs - Cover 4 pole Male Plugs - Plug 4 pole Male Plugs - Cover

Code MRP

144010 £1.79

Code MRP

144013 £0.97

Code MRP

144007 £1.53

Code MRP

144013 £0.97

Code MRP

P690405001.0 £11.83

Code MRP

P690405003.0 £16.06

Code MRP

P690207003.0 £12.09

Code MRP

P690203003.0 £11.45

Code MRP

P690203005.0 £15.31

1 metre 4 pole male to female

4 core 1.5mm2 LSOH lead



3 metre 4 pole male to free end






Code MRP

P690703000.3 £11.05

Code MRP

P690717000.3 £12.09

Code MRP

P690806000.0 £22.61

Code MRP

P690315003.0 £12.46

Code MRP

P690315005.0 £17.29

4 Pole Luminaire Fixed T Piece

(Plastic) (1.5mm2) 0.3m 3 core drop4 Pole Luminaire Flying T Piece

(Plastic) (1.5mm2) 0.3m 3 core drop4 Pole 3 Way Circuit Splitter

Module (Plastic)

3 metre 4 pole 2 Way

Switch Drop Lead


Switch Drop Lead

Code MRP

P690303005.0 £16.73


Switch Drop Lead

Code MRP

P690719000.3 £13.32

4 Pole Luminaire Flying T Piece (Plastic) (1.5mm2) 0.3m 4 core drop

Code MRP

P690705000.3 £11.53

4 Pole Luminaire Fixed T Piece

(Plastic) (1.5mm2) 0.3m 4 core drop

Code MRP

P690405005.0 £20.32



Code MRP

P690207005.0 £19.32



Code MRP

P690303003.0 12.46


Switch Drop Lead

Pre-

fab

rica

ted

Wir

ing

185sales line: +44 (0)1709 829511

accessories 6 pole Pre-fabricated

6 pole Female Plug - blue connector 6 pole Female Plug - white connector 6 pole Female Plug - base 6 pole Female Plug - hood

Code MRP

144049 £1.38

Code MRP

144005 £1.35

Code MRP

144023 £0.64

Code MRP

144016 £0.86

Code MRP

144048 £1.09

Code MRP

144001 £1.05

Code MRP

144023 £0.64

Code MRP

144016 £0.86

Code MRP

P690474003.0 £22.39

Code MRP

P690474005.0 £28.52

Code MRP

P690250003.0 £17.03

6 pole Male Plug - blue connector 6 pole Male Plug - black connector 6 pole Male Plug - base 6 pole Male Plug - hood







Code MRP

P690249003.0 £17.18

Code MRP

P690249005.0 £23.46

Code MRP

P690248003.0 £13.93

Code MRP

P690247003.0 £12.36

Code MRP

P690247005.0 £16.17











Code MRP

P690748000.3 £13.44

6 Pole / 6 Tail Fixed T piece (Plastic) (1.5mm2) 0.3m 6 core drop

Code MRP

P690250005.0 £23.17



Code MRP

P690248005.0 £18.15



Code MRP

P690756000.3 £16.24

6 Pole / 6 Tail Flying T piece (Plastic) (1.5mm2) 0.3m 6 core drop

Code MRP

P690754000.3 £15.46


Code MRP

P690474001.0 £17.62



Code MRP

P690746000.3 £13.36


6 Pole 3 Way Circuit Splitter Module (Plastic)

Code MRP

P690814000.0 £29.34

Pre-fabricated

Wirin

g

186 www.cmd-ltd.com

Leads, T Pieces and Splitters Speci�cation

Supply voltage 230 Volts AC +10%/-6% 50HzCurrent Rating 16AmpIP Rating IP2XConnection Via Wieland GST 18i 4 or 6 pole female, male locking/latching type, complying with the requirements of BS EN 61535 : 2009. All connectors are designed to comply with IEC 61535 (ed.1): 2009-02.Operating temperatures -5°C to 35°C

Flexible Cable Speci�cation

Material Low smoke zero halogen inner and outer sheaths IEC60332.3 Cat CCores 4Sizes 1.5mm2

Flame test to IEC 332/3A – Category C HD 405.3 VDE 0472 part 804 test CSelf-extinguishing VDE 0207 part 24 type HM2Acid test IEC 754-2Smoke density VDE 0482 part 268 IEC 1034-1/1034-2

Connector Speci�cation

Wieland GST18 RangeNumber of Poles 4 Pole or 6 PoleRated Voltage 250VRated Impulse Voltage 4kV for 250V and 250/240VRated Current 16ACompliance DIN VDE 0628 (BS EN/IEC 61535 : 2009) DIN VDE 0625, EN 60320IP Rating IP20Insulation Components Thermoplastic material (polyamide), halogen-freeContact Parts Brass with nickel plating

Locking device in accordance to DIN VDE 0628

Technical Data

6 Pole Pre-fabricated accessories

Code MRP

P690744000.3 £15.08

Code MRP

P690742000.3 £16.17



Code MRP

P690752000.3 £14.86

Code MRP

P690750000.3 £14.86



Please note: Both 4 pole and 6 pole pre-fabricated wiring systems are available in a variety of lengths so please ask a member of our sales team for more information.

Head Of�ce

Sycamore RoadRotherhamSouth YorkshireS65 1ENUnited Kingdom +44 (0)1709 829 511

London Showroom

99 Charterhouse StreetClerkenwellLondonEC1M 6HRUnited Kingdom+44 (0)20 7251 7080

[email protected]

Head Of�ce

Sycamore RoadRotherhamSouth YorkshireS65 1ENUnited Kingdom +44 (0)1709 829 511

London Showroom

99 Charterhouse StreetClerkenwellLondonEC1M 6HRUnited Kingdom+44 (0)20 7251 7080

[email protected]

Documents

Ergo Solutions Power Modules Energy Management Power Distribution Lighting Control