erSolutions 18 th...PRODUCT CATALOGUE DATA CENTER SOLUTIONS CHINA · SHENZHEN Add. : 4-6F, Block 3, Unibuilt Technology Industrial Park, Huarong Road, Dalang, Longhua District, 518109

2019PRODUCT CATALOGUE

DATA CENTER SOLUTIONSCHINA · SHENZHEN

Add. : 4-6F, Block 3, Unibuilt Technology Industrial Park,Huarong Road, Dalang, Longhua District, 518109 Shenzhen, ChinaTel : + 86 0755-3367 3808 / 3367 3797Fax : + 86 0755-3367 3791 / 3367 3792E-mail : [email protected] : www.koc.com.cn / www.kamaxoptics.com

Fiber optic components global supplier

18Data

Center

Solutions

th

Fiber optic co

mponents

global suppli

er

Content

HIGH DENSITYHIGH PERFORMANCEHIGH SCALABILITY

Internal Connec�on SeriesOptical Module Subassembly MT - MT Assembly MT - 2*MT Assembly MT - Fiber Array Assembly MT - SUS Assembly Fiber Array - SUS Assembly MT - Jumper Assembly

AOC Subassembly MT - MT AOC Assembly Fiber Array - Fiber Array AOC Assembly Jumper - Jumper AOC Assembly

COBO Subassembly MPO - MT Assembly MPO - Fiber Array Assembly MPO - Jumper Assembly

Cabling Products SeriesCable Connection Switchable Duplex LC Uniboot Fiber Optic Patch Cord High Density LC Duplex Uni-boot Patch Cord MTP/MPO - LC Fan-out Patch Cord MTP/MPO Trunk Fiber Optic Cable Patch Cord MPO Polarity Changeable Patch-Cord OM5 Product Series MTP/MPO Polarity Instruction

Rack & Panel Fiber Distribution Frame Rack Mount Patch Panel High Density Fiber Distribution Frame MTP/MPO - LC Fix Type Fiber Optical Cassette MTP/MPO - LC Sliding Type Fiber Optical Cassette Adapter Pane

Accessories & Tools LC Uniboot Connector with Up-down Tool

KOC Branches

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

. . . . . . . . . . . . . . . . . . . . . . . . . . . . 22. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

AboutKOC

Established in 2001, KOC Group is a state and municipal level Hitech Company, located in Longhua District, Shen-zhen, China. KOC started its fiber op�c connec�on trad-ing at its early stage. A�er more than 10-year's develop-ments, it becomes a professional manufacturer special-ized in telecom, fiber op�c network connec�on, passive devices, data center cabling etc.

KOC products are extensively applicable to telecom operators, fiber op�c engineering, CCTV, broadband net-works, FTTH, data center in more than 80 countries worldwide.

KOC provides reliable products and services to custom-ers under the concept of high quality orienta�on.

HistoryandExpansions

2001KOC founded

2004Path cord Produc-�on base set up in Yintan, Jiangxi Province.

2005Produc�on base relocated in Hitec Cluster - Shenzhen

2010Set up PLC produc�on Lines

2008Sub-companies established for adaptors, connec-tors and other components, KOC Group established.

2017Acquired and integrated com-panies under KOC, set up passive device and data center divisions.

INTERNALCONNECTIONSERIES

Internal Connec�on focuses on op�cal passive connec�ons in three applica�ons：DACs, AOCs and COBO applica�ons. The business model includes OEM, ODM and JDM, to pro-vide customers with quality products, professional techni-cal support and professional service.

* MTP is a US registered trademark of USCONEC.

MT - MT Assembly

08 MT - MT AssemblyOp�cal Module Subassembly 09MT - 2*MT Assembly

Op�cal Module Subassembly

Passive op�cal interconnect jumpers can be deployed in QSFP, QSFP28, QSFP-DD, Micro QSFP, CXP, CFP, CDFP, and

any parallel op�cal transceiver modules, suppor�ng various network types, including Ethernet op�cal network,

Infiniband op�cal network, and Fiber Channel network.

FeaturesGR-1435, GR-1221 compliant

Transmission mode: mul�-channel serial and

parallel transmission mode

High accuracy,

Support：12 x 1.25~3.5G, 2X40G(4x10G),

2X100G(4x25G), 10X10G, 12x10G, 4x32G, 8X10G,

8X25G, 8X50G, 8X100G

Coupling ModePassive coupling with guide pins and 0, 8 degrees

IL/RL SpecificationsMT IL ≤0.60 dB typical 0.20 dB MT RL ≥20 dB

Environment Conditions-40℃~＋85℃

Connector AConnector BFiber shapeFiber countFiber typeLengthLength tolerance

MT Ferrule with guide pinMT Ferrule

Ribbon/single fibers8F/12F/16F/24F

OM3, OM4; OM1, OM2; OS1, OS2; PM; OM5；20~100mm, customized length available

+500um/-0um

MT - 2*MT Assembly





MT Ferrule with guide pin2*MT Ferrule

Ribbon/single fibers8F/12F/16F/24F

OM3, OM4; OM1, OM2; OS1, OS2; PM; OM520~100mm, customized length available

+500um/-0um




High accuracy,

Support：12 x 1.25~3.5G, 2X40G(4x10G),

2X100G(4x25G), 10X10G, 12x10G, 4x32G，8X10G,

8X25G, 8X50G, 8X100G




MT - Fiber Array Assembly

10 MT - Fiber Array AssemblyOp�cal Module Subassembly 11MT - SUS Assembly






Transmission mode: mul�-channel serial and paral-

lel transmission mode

High accuracy,

Support：12 x 1.25~3.5G, 2X40G(4x10G),

2X100G(4x25G), 10X10G, 12x10G, 4x32G，8X10G,

8X25G, 8X50G, 8X100G

Coupling ModeAc�ve coupling with light source and 0~ 45 degrees

Passive coupling with guide pins and 90 degrees




MT Ferrule with guide pinFA, customized size/angle available

Ribbon/single fibers2F/4F/8F/12F/16F/24F

OM3, OM4; OM1, OM2; OS1, OS2; PM; OM5；20~100mm, customized length available

+500um/-0um

MT - SUS Assembly







High accuracy,

Support：12 x 1.25~3.5G, 2X40G(4x10G),

2X100G(4x25G), 10X10G, 12x10G, 4x32G, 8X10G,

8X25G, 8X50G, 8X100G





MT ferrule with guide pinMT&SUS or FA&SUS, customized size/angle available for FA

Ribbon12

OM3, OM4; OM1, OM2; OS1, OS2; OM5；20~100mm, and customized length available

+500um/-0um

Fiber Array - SUS Assembly

12 Fiber Array - SUS AssemblyOp�cal Module Subassembly 13MT - Jumper Assembly








High accuracy,

Support：12 x 1.25~3.5G, 2X40G(4x10G),

2X100G(4x25G), 10X10G, 12x10G, 4x32G, 8X10G,

8X25G, 8X50G, 8X100G


Ac�ve coupling with light source and 0~ 45 degrees





FA, customized size/angle availableSUS

Ribbon12

OM3, OM4; OM1, OM2; OS1, OS2; OM5；20~100mm, and customized length available

+500um/-0um

MT - Jumper Assembly







High accuracy,

Support：12 x 1.25~3.5G, 2X40G(4x10G),

2X100G(4x25G), 10X10G, 12x10G, 4x32G，8X10G,

8X25G, 8X50G, 8X100G

Coupling ModePassive coupling with guide pins and 0, 8, 10

degrees as customer designed






MT ferrule with guide pinCustomized Jumper/Lens, Usconect Prizm/Lensed MT

Ribbon2F/4F/8F/12F/16F/24F

OM3, OM4; OM1, OM2; OS1, OS2; PM;OM5；20~100mm, and customized length available

+500um/-0um

MT - MT AOC Assembly

14 MT - MT AOC AssemblyAOC Subassembly 15Fiber Array - Fiber Array AOC Assembly

AOC Subassembly

Passive op�cal interconnect jumpers could be deployed in QSFP AOC, QSFP28 AOC, QSFP-DD AOC, Micro QSFP AOC,

CXP AOC, CFP AOC, CDFP AOC, and any parallel op�cal transceiver module AOC, suppor�ng network types include

Ethernet with op�cal fiber transmission, Infiniband with op�cal fiber transmission, and Fiber Channel.




High accuracy,

Support：12 x 1.25~3.5G, 2X40G(4x10G),

2X100G(4x25G), 10X10G, 12x10G, 4x32G，8X10G

，8X25G，8X50G，8X100G





MT ferruleMT ferrule

Round Cable8F/12F/16F/24F

OM3, OM4; OM1, OM2；OS1,OS2; PM; OM5;20~100mm, and customized length available

+500um/-0um

Fiber Array - Fiber Array AOC Assembly







High accuracy,

Support：12 x 1.25~3.5G, 2X40G(4x10G),

2X100G(4x25G), 10X10G, 12x10G, 4x32G，8X10G

，8X25G，8X50G，8X100G







Customized Fiber ArrayCustomized Fiber Array



+500um/-0um

Jumper - Jumper AOC Assembly

16 Jumper - Jumper AOC AssemblyAOC Subassembly 17MPO - MT AssemblyCOBO Subassembly







High accuracy,

Support：12 x 1.25~3.5G, 2X40G(4x10G),

2X100G(4x25G), 10X10G, 12x10G, 4x32G，8X10G

，8X25G，8X50G，8X100G







Customized Jumper/Lens Customized Jumper/Lens



+500um/-0um

MPO - MT Assembly

Passive op�cal interconnect jumper could connect to op�cal modules, op�cal FPGA and Silicon photonic chip

installed on PCB, and also it could connect to any parallel op�cal transceiver modules, suppor�ng various network

types, including Ethernet network, Infiniband network and Fiber Channel network, the applica�on equipment

includes Switches, Servers, Storages, HPC, and, etc.




High accuracy,

Support：12 x 1.25~3.5G, 2X40G(4x10G),

2X100G(4x25G), 10X10G, 12x10G, 4x32G，8X10G

，8X25G，8X50G，8X100G





MPOMT Ferrule

Ribbon8F/12F/16F/24F

OM3, OM4; OM1, OM2；OS1, OS2; PM; OM5；20~100mm, and customized length available

+500um/-0um








High accuracy,

Support：12 x 1.25~3.5G, 2X40G(4x10G),

2X100G(4x25G), 10X10G, 12x10G, 4x32G，8X10G

，8X25G，8X50G，8X100G







MPOCustomized Jumper/Lens


OM3, OM4; OM1, OM2；OS1, OS2; PM; OM5;20~100mm, and customized length available

+500um/-0um

MPO - Fiber Array Assembly

18 MPO - Fiber Array AssemblyCOBO Subassembly 19MPO - Jumper Assembly

COBO Subassembly








High accuracy,

Support：12 x 1.25~3.5G, 2X40G(4x10G),

2X100G(4x25G), 10X10G, 12x10G, 4x32G，8X10G

，8X25G，8X50G，8X100G

Coupling ModePassive coupling with guide pins and 0, 8, degrees






MPO Customized Fiber Array


OM3, OM4; OM1, OM2；OS1,OS2; PM; OM5；20~100mm, and customized length available

+500um/-0um

MPO - Jumper Assembly

CABLINGPRODUCTSSERIES

* MTP is a US registered trademark of USCONEC.

Cabling Products focuses on op�cal passive connec�ons, cabling management and high-density pre-terminated connec�ons in the structured fiber cabling system, and we are commi�ed to provide cus-tomers with high-precision, low-loss, high-reliability, low-cost, miniaturiza�on and high-compa�bility products, solu�ons and services.

Switchable Duplex LC UnibootFiber Optic Patch Cord

22 Switchable Duplex LC Uniboot Fiber Optic Patch CordCable Connec�on 23High Density LC Duplex Uni-boot Patch Cord

Cable Connec�on

Duplex Uniboot connector patch cord is designed by KOC. This highly flexible duplex cable reduces cabling conges-

�on and improves patch cord management and installa�on,. This it improves cabling space.

Features- Fiber polarity A -> A or A -> B can be switched

by installer

- Thin round cable

- Duplex connectors with single boot which is

highly integrated and easy for installa�on

- Standard compa�ble, simplex / duplex LC

connectors. Other op�ons: SC / FC

- High performance, 100% tested

- Fiber type: OFNR, OFNP

- Customized patch cord length

- Two notches on the connectors for easy for

installa�on and uninstalla�on

- Mini and flexible boot is available. Boot can

be turned to any angle

- Quick deployment reduces installa�on �me

- Fast upgrading supports parallel transmission

system

- Outer jacket material, PVC, LSZH and other

materials selec�on

High Density LC Duplex Uni-boot Patch Cord

This High Density LC Duplex Uni-boot Patch Cord is available for high-density fiber patch panels. The highly flexible

duplex cable reduces cable conges�on and can be plug in and out of the panel easily and quickly so that it improves

management and installa�on convenience.

Features- Thin round cable

- Duplex LC with latched uniboot, easy for

plug in and out among panels

- Standard compa�ble, duplex LC connectors;

- High transmission, 100% tested under IEC

standards

- Quick deployment reduces installa�on �me

- Fast upgrading supports parallel transmis-

sion system

- Outer jacket material, PVC, LSZH and other

materials selec�on

- Fiber type: ODNR, OFNP

- Customized patch cord length

Insertion LossReturn LossDurability

Operating Temperature

≤0.30 dB≥50 dB (PC) , ≥60 dB (APC)

24 MTP/MPO - LC Fan-out Patch CordCable Connec�on 25MTP/MPO Trunk Fiber Optic Cable Patch Cord

Cable Connec�on

MTP/MPO - LC Fan-out Patch Cord

The fan-out is applied to connect 12-core MTP / MPO connector to the LC connectors on the trunk cable. KOC

provides both standard and customized branch lengths. When the network equipment is close to MTP patch panel

frames, the length of fan-out patch cords are minimized. For the hardware and equipment in the same cabinet, the

longer patch cords can provide flexibility at any loca�on, and the branch cables can be winded into the ver�cal cable

organizer.

Features- Array connectors with high precision low loss

MTP / MPO connectors

- Smooth upgrading to next genera�on data

center for 40GbE and 100GbE

- Outer jacket material op�on: PVC, LSZH and

other selected materials

- Cable flammability ra�ng: OFNR, OFNP, LSZH

Insertion Loss

Return LossDurability


Low loss ≤0.35 dBStandard Loss ≤ 0.7 dB

≥60 dB

≤0.3 dB

≥50 dB

Low loss ≤0.35 dBStandard Loss ≤0.5 dB

≥30 dB

≤0.3 dB

≥30 dB

MTP / MPO LC MTP / MPO LCSingle mode Multimode

MPO Polarity Changeable Patch Cord

26 MPO Polarity Changeable Patch-CordCable Connec�on

The MPO Switchable Connector is a unique design that allows the use ofround style. The housing of the MPO

Switchable Connector can be Polarity change in the field without any tool, and simple gender change without taking

off the housing. This connector allows the fiber polarity to be switched at the �me of cable assembly installa�on

without having to reterminate the connectors. This design is commonly used in data centers.

Features- Low inser�on loss and back reflec�on loss

- Polarity chang in the field without any tool

- Simple gender change without taking off the

housing

- Good exchangeability

- Good Durability

- High temperature stability

- Various boots types available

- Standard: Telcordia GR-1435-CORE compliant

Insertion Loss

Return LossRepeatability

DurabilityInterchangeability

Tensile strengthOperating Temperature

≤0.75 dBtypical≤0.5 dB




ItemSingle mode

Standard Low lossMultimode

Standard Low loss

27OM5 Product SeriesCable Connec�on

OM5 Product Series

The OM5 fiber has been approved as a new mul�mode op�cal fiber for high-speed data center applica�ons. and is

designed to support at least four low-cost wavelengths in the 850-950 nm range, enabling op�mal support of

emerging Shortwave Wavelength Division Mul�plexing (SWDM) applica�ons that reduce parallel fiber count by at

least a factor of four to allow con�nued use of just two fibers (rather than eight) for transmi�ng 40 Gb/s and 100

Gb/s and reduced fiber counts for higher speeds. SWDM has many applica�ons in Data Centers and other applica-

�ons.OM5 cabling fully compa�ble and intermateable with OM3 and OM4 cabling. The related OM5 patchcord,

Casse�e and Panels has a�racted wide a�en�on in the industry, and the patchcord cover also all type of fiber

connectors

Features- Wavelength range 850-953 nm

- Low inser�on loss and back reflec�on loss

- High precision alignment

- Good exchangeability

- High temperature stability

- Compa�ble with OM3 and OM4 patchcord

Application- Telecommunica�on networks

- Data Center

- CATV , and Mul�media

- Op�cal switch interframe connec�on

- Asynchronous Transmission Mode (ATM)

Fiber TypeWavelength Range

Jacket ColorFurcation ColorConnector TypeConnector Color

Regulatory ComplianceOperation Temperature

OM5 (50μm multimode fiber)850-953 nmLime GreenLime Green

MPO / MTP / LC / SC / FC / CustomizedCustomized

IEC 60793-2-10 /TIA-492AAAE/RoHS/ISO9001-40 to + 85°C

Item Specification

Cassette and Adapter

Switch Polarity (Sample: Aqua housing/3.0mm short mini boot)

≥60 dB (APC) ≥30 dB (PC)≤0.1dB

≤0.2 dB typical change, 500 matings≤0.2dB>70N

-40 to + 85°C

Push back housing

Housing

1

2

3

4

5

6

Key

Push key in Push key out

Reversaled Connector Release the housing/ Finished

28 MTP/MPO Polarity InstructionCable Connec�on

Fiber Distribution Frame

Shenzhen KOC Communica�on Co. Ltd. is the manufacturer specialized in data center cabling products and high

precision connec�ng components. Its MTP * / MPO connector advanced capabili�es provide guaranteed and

reliable connec�on for 40G / 100G data centers.

KOC high-density fiber pre-connected system deploys high-density data center easily and quickly in horizontal

area and storage area of the network. The maintenance and expansion in the future is very simple.

MTP / MPO pre-terminated cabling system consists of three parts: trunk cable, MTP / MPO pre-terminated

module and patch panel.

Features- Indoor cable distribu�on

- Fiber entries on top or bo�om available

- High-density and modular design

- Max. capacity up to 792 fibers

- No tools are needed during opera�on

- Customizable

- 19” standard cabinet

- Accomplishing scien�fic arrangement for

patch cords with fiber storage units

- suitable for inser�ng installa�on of SC, FC and

ST adaptors

- Safety design in grounding and security door

- Top, bo�om and rear openings for cable entry

covered with removable blank panels.

KOFDS series of Fiber Distribu�on Frames, designed for Central Data Office or the building MDF room, provides

high-density fiber management and distribu�on. The modular design ensures the easily maintenance and efficient

management for your fiber cabling systems.

29Fiber Distribution FrameRack & Panel

MTP/MPO Polarity Instruction

End A End B

12 Core Patchcord

Blue1/2/3/4/5/6/7/8/9/

10/11/12/

OrangeGreenBrown

GreyWhite

RedBlack

YellowPurple

PinkAqua

Blue1/2/3/4/5/6/7/8/9/

10/11/12/

OrangeGreenBrown

GreyWhite

RedBlack

YellowPurple

PinkAqua

End A Polarity A End B

Blue1/2/3/4/5/6/7/8/9/

10/11/12/

OrangeGreenBrown

GreyWhite

RedBlack

YellowPurple

PinkAqua

Blue12/11/10/

9/8/7/6/5/4/3/2/1/

OrangeGreenBrown

GreyWhite

RedBlack

YellowPurple

PinkAqua

End A End B

Blue1/2/3/4/5/6/7/8/9/

10/11/12/

OrangeGreenBrown

GreyWhite

RedBlack

YellowPurple

PinkAqua

Orange1/2/3/4/5/6/7/8/9/

10/11/12/

BlueBrownGreenWhite

GreyBlack

RedPurpleYellow

AquaPink

End A End B

Polarity B

Polarity C

High Density Fiber Distribution Frame

MTP * / MPO fiber distribu�on frame is a scalable solu�on mainly used in high-density 10 Gigabit Ethernet applica-

�ons. There are Main Distribu�on Area (MDA) and Horizontal Distribu�on Area (HDA) terminal cabling products.

There are usually three designs: 1U, 2U, 3U. According to data center setup needs, it simplifies the field installa�on,

improves system performance and achieves higher system density, modular system management and pre-assembled

components so that it reduces the installa�on �me and achieves the movement and expansion in the fastest way.

Features- Sliding tray design, the new type of the expan-

sion and adequate opera�onal space enable

the highest density

- A variety of welding wiring signs enable easy

welding and cabling records

- High-density trunk cable with lesser bending

radius enables easy storage and installa�on

- Connector module, 19-inch rack mount for

easy installa�on and expansion

- Low inser�on loss enable mul�-level connec-

�ons in complete fiber link when deploying

TIA-942 compliant systems

- Customized branch cable assemblies for

seamless integra�on with mainstream SAN

switches

- Factory termina�on provides stable quality

and ensures system reliability . It reduces instal-

la�on �me, meet series standards of TIA /

EIA604-5-D-2007, IEC61754-7-2008

30 Rack Mount Patch PanelRack & Panel

Rack Mount Patch Panel

According to the needs of data center setup, we recommend to use HDF high-density rack-mounted cabinet; for

data center with MDA, IDA or HDA wiring area fiber trunk connec�on and management. It is installed in 19-inch rack

or cabinet with Pre-terminated MPO adapter module or MPO adapter front panels. This economical design of

Highdensity and module reduces the number of frames, saving valuable rack space.

Features- MPO 1U op�cal fiber patch panel can accom-

modate 4 MPO pre-terminated casse�es. If

MPO panels are installed, the maximum cores

can reach 288

- MPO 2U op�cal fiber patch panel can accom-



can reach 576

- MPO 3U op�cal fiber patch panel can accom-



can reach 864

- Made of high quality cold rolled steel plate;

- Mul�ple cable entry and patch cord exit for

easy opera�on and management

- More than four �mes the density of tradi�on-

al patch panels, greatly save the space of the

cabinet

- Compliant with TIA / EIA604-D-2007,

IEC61754-7-2008 series standards

- Modular design, 19-inch rack mount, easy for

future expansion

31High Density Fiber Distribution FrameRack & Panel

MTP/MPO - LCFix Type Fiber Optical Cassette

MTP / MPO-LC fiber op�c casse�e is a closed-type of device with a 12/24-core fiber patch cords for branching

12-core MTP / MPO trunk cable to LC Connectors so that the system appliances are easily be connected to the ports

or panels. The casse�e can be quickly deployed to 24 LC or 12 SC adapters and can be easily installed in HDF

high-density rack-mounted ODF. The modular structure is high manageable and flexible. With the future require-

ments on the connec�vity, the modules can be changed to meet the corresponding needs. In the meanwhile, the

exis�ng trunk cabling structure remains unchanged.

Features- Excellent transmission performance is 100%

factory pre-terminated and tested

- The adop�on of universal polarity design

ensures the correct fiber polarity and the

variety of polarity to be chosen in the system

- Flexible expansion, modular design

- One-hand opera�on

- Metal shell design, good intensity, effec�ve

protec�on for internal fiber branch parts



- Super bend-bright fiber, minimum fiber bend-

ing radius, minimized structure

- Smooth upgrade to next genera�on data

center of 40GbE and 100GbE applica�ons

MM

SM

StandardLow Loss

Ultra-Low-LossStandardLow Loss

Ultra-Low-Loss

1.0 dB0.7 dB

0.35 dB1.0 dB0.7 dB0.5 dB

Type Module IL (Max)

MTP/MPO - LCSliding Type Fiber Optical Cassette

MPO fiber casse�e is mainly used for data center with the security transac�ons between MPO pre-terminated trunk

cable and LC or SC connectors. They are installed in the 19 "1U-3U fiber patch panels. LC or SC adapters are installed

in the front panels. MPO adapters adn pre-terminated trunk cable are installed in the rear panels. Plug-and-play

modular structure enables quick deployment of data center fiber infrastructure and improve troubleshoo�ng and

reconfigura�on a�er reloca�ng, increasing and changing the cables. 100% of the terminals are terminated in the

factory and rigorously tested to ensure minimal inser�on loss. They are applicable to IDC and FTTB pre-wired

systems and to Ethernet transmission. The casse�es are suitable for future 40G / 100G system applica�ons. They are

able to meet the full demands of high speed networks with convenient for upgrading

Features- Excellent transmission performance is 100%

factory pre-terminated and tested

- The adop�on of universal polarity design

ensures the correct fiber polarity and the

variety of polarity to be chosen in the system

- Flexible expansion, modular design

- Super bend-bright fiber, minimum fiber bend-

ing radius, minimized structure

- One-hand opera�on

- Smooth upgrade to next genera�on data

center of 40GbE and 100GbE applica�ons

- Metal shell design, good intensity, effec�ve

protec�on for internal fiber branch parts



32 MTP/MPO - LC Fix Type Fiber Optical CassetteRack & Panel 33MTP/MPO - LC Sliding Type Fiber Optical Cassette

Rack & Panel

34 Adapter PanelRack & Panel

Adapter Panel

The adapter panel provides fast and efficient port management for

MTP/MPO or LC/SC connectors. It is applicable for next-genera�on

high-density data center solu�ons. The panel reaches the connec�on

and deployment of the patch cords and pigtails between the devices

and patch panels. The panel is used with the field moun�ng connectors,

or with the pre-terminated cables device to the interconnect hardware.

Features- High-density ports, single adapter panel Configurable with 24 IP

adapter ports or 6 SC adapter ports or 6 MPO / MTP adapter ports;

- High-quality cold-rolled steel, compliant with European ROHS

standards

- Clear connector coding mark

- Flexible structure, adapter port configura�on can be flexibly selected

- Applicable to all types of industrial standard adapters

- Cartridge installa�on for easy installa�on

- Easy to upgrade to 40G / 100G network without changing the fiber

management structures

- Compliant with TIA / EIA604-D-2007, IEC61754-7-2008 series

LC Uniboot Connector with Up-down Tool

The LC Uniboot Connector with Up-Down tool combines a simple installa�on and removal process with space

u�liza�on efficiency.The compact design and easy, A/B polarity reversible func�on of the LC Connector makes

managing cable systems simpler, while the seamless latching mechanism ensures a stable connec�on. Used for

single, mul�-mode and APC applica�ons, the prac�cal design of the LC Uniboot Connector makes it easy to engage

and disengage from even the most compact panels.

Features- Array connectors with high precision low loss

MTP / MPO connectors

- Smooth upgrading to next genera�on data

center for 40GbEt and 100GbE

- Outer jacket material op�on: PVC, LSZH and

other selected materials

- Cable flammability ra�ng: OFNR, OFNP, LSZH

Insertion LossReturn LossDurability


≤0.30 dB≥50 dB (PC), ≥60 dB (APC)

Production Area

2,500 m2

Office Area

1,000 m2

Bachelor degree or higher

42 staff10+ years working experience

45 staff15+ years working experience

45 staff

- “Ready to produce" materials

- Special designed textures & tools

- Simplified order handling process

- Well trained operators for mul�-tasks

- Target to deliver assemblies to site

- 3~7 days from Receipt of PO

- The most ra�onal and fast way of logis�cs

- Engineers: earliest entrants in fiber industry of China

- Sales: overseas working experiences

- Opera�on team: fortune global 500 working experience

Why KOC can promise Fast delivery?

PRODUCTION

Cable Production Line

FA Assembly Operating Part Workshop

Welding PLC Assembly

Automatic Assembly

KOC USA (Sales Office)

Address: 22180 Fuchsia Ct. Woodland Hills, CA 91367 USA

Mobile: +34 621 208 700 Email: karina@kamaxop�cs.com

KOC Korea (Sales Office)

Address: 2F, BI Center, Nambu Univ. , Kwangsangu, Kwangju City , South Korea

Tel: +82 070 8272 2137 Mobile: +82 10 3004 7807

Skype: Kate Kuk Email: [email protected]

KOC Latinoamerica (Sales & Production)

Address: Ballivian 2271, Buenos Aires, Argen�na

Tel: +54 11 4521 4800 Email: [email protected]

KOC INDIA (Sales Office)

Address: 60 DUPLEX-1, SWARNIM VIHAR SECTOR-82 NOIDA, INDIA-201304

Tel: +91 9810119946/+91 9650709946 Email: [email protected]/[email protected]

Website: www.kocindia.in

KOC Europe Communication SLU

Address: Calle Iregua 17 Ribarroja del Turia, Valencia Spain 46190

Tel: +34 963 146 471 Email: [email protected]

Website: www.kamaxeurope.com

KOC Brasil (Sales & Production)

Address: Rua Brasilia 158 – Ouro Fino, Sao José Dos Pinhais, PR, Brasil

Tel: +55(41) 3588 –1302 Email: [email protected]

KOC Germany (Sales Office)

Address: Am Mühlentor 24 53844 Troisdorf Germany

Tel: +49 2208 9426302 Mobile: +491632129830

Email: [email protected]

KOC Greece (Sales Office)

Address: 12 MESSINIAS Str METAMORPHOSIS POSTAL CODE 14451 ATHENS GREECE

Tel: +0030 6937439205 Email: [email protected]

KOC Branches

Documents

erSolutions 18 th...PRODUCT CATALOGUE DATA CENTER SOLUTIONS CHINA · SHENZHEN Add. : 4-6F, Block 3, Unibuilt Technology Industrial Park, Huarong Road, Dalang, Longhua District, 518109