Upload
amit-sharma
View
47
Download
1
Tags:
Embed Size (px)
Citation preview
©Business Intelligence Solution Providers | Installation of Essbase 11.1.1.3
learnhyperion.wordpress.com
1
Document:
Essbase Beginner’s Guide
Installation Essbase 11.1.1.3
Chapter-IV
Description:
This document guides you through easy steps to install and configure
oracle Hyperion Essbase and Shared service.
History:
Version Description
Change
Author Publish Date
0.1 Initial Draft Gaurav
Shrivastava
15-Jan-2011
0.1 Review 1st Amit Sharma 16-Jan-2011
©Business Intelligence Solution Providers | Installation of Essbase 11.1.1.3
learnhyperion.wordpress.com
2
Table of Contents
1. Product For download………………………………………….3
2. Installation of Hyperion 11.1.1.3………….…………….…….5
1) Installation of Foundation Services…………….……………………6
2) Installation of Essbase…………………………………………….……9
3. Configuring Hyperion
11.1.1.3…………………………..……12
4. Components
Verification……………………………….…….13
1) Administration
Services……………………………….……………...14
2) Client
Services……………………………………………………….….15
3) Essbase
Studio…………………………………………………….…….19
5. Hyperion 11.1.1.3 Environment
Variable………..………….20
6. Multi Server
Environment……………………………………20
©Business Intelligence Solution Providers | Installation of Essbase 11.1.1.3
learnhyperion.wordpress.com
3
.
Product for Download
All Hyperion products are available in http://edelivery.oracle.com/. You need to
download the required products from there.
Step1) Open http://edelivery.oracle.com/
Step 2) Required Login Check the both check box to ensure to agree Terms & Condition
©Business Intelligence Solution Providers | Installation of Essbase 11.1.1.3
learnhyperion.wordpress.com
4
Step 3) The Product Search and selection
©Business Intelligence Solution Providers | Installation of Essbase 11.1.1.3
learnhyperion.wordpress.com
5
Step 4) Download all the suits those are highlighted
Installation of Hyperion 11.1.1.3
You can download Essbase 11.1.1.3 from the http://edelivery.oracle.com. Once
you download all the required components, keep them in a common folder.
After all components placed successful,y go back to installer folder and Click the
highlighted InstallTool.cmd
©Business Intelligence Solution Providers | Installation of Essbase 11.1.1.3
learnhyperion.wordpress.com
6
After run installing InstallTool.cmd, you will get a bellow command prompt.
Installation of Foundation Services Specify the language.
Startup Screen wizard will guide you through installation Hyperion product
suite.
©Business Intelligence Solution Providers | Installation of Essbase 11.1.1.3
learnhyperion.wordpress.com
7
Select the destination for “Hyperion Home” directory. You can’t change
“Hyperion Home” directory once it set during installation. However, the
Hyperion Home migration utility can be used to change Hyperion Home.
Select installation type “Choose components individually”. Components are
chosen in case of user may not be required all the components. You can select
components manually.
Select component to install ( We are going to install Shared service first)
1. Hyperion Foundation (Shared Service only, uncheck all other
components)
©Business Intelligence Solution Providers | Installation of Essbase 11.1.1.3
learnhyperion.wordpress.com
8
List of Product to be installed
It registers itself to the .net Architecture
Completion of Installation
All component install successfully.
©Business Intelligence Solution Providers | Installation of Essbase 11.1.1.3
learnhyperion.wordpress.com
9
Installation of Essbase Open the folder in which you kept all downloaded files. Run “Install.cmd” file
again. The EPM system installer wizard will open.
The “Hyperion Home” directory is already created while installation of
foundation services. You can’t change “Hyperion Home” directory path. The
new component will install in the same directory.
©Business Intelligence Solution Providers | Installation of Essbase 11.1.1.3
learnhyperion.wordpress.com
10
The “choose components individually” option allows you to select component
manually.
This time select “Essbase” in the product list.
©Business Intelligence Solution Providers | Installation of Essbase 11.1.1.3
learnhyperion.wordpress.com
11
When you click on “+” sign, you will get to know what product is going to be
installing.
This is the confirmation list of selected components.
Click on next.
©Business Intelligence Solution Providers | Installation of Essbase 11.1.1.3
learnhyperion.wordpress.com
12
Installation status
Click on Finish
You can check that the “Essbase” get installed or not.
Start à All Program à Oracle EPM System à Essbase
You can see all selected component has come in the program list.
©Business Intelligence Solution Providers | Installation of Essbase 11.1.1.3
learnhyperion.wordpress.com
13
Configuring Hyperion 11.1.1.3
Launch the EPM Configuration Tool Then steps to connect Oracle 10g with
Shared service and registry Database Configuration.
All Programs àOracle EPM System à Foundation Services à EPM System
Configuration
Select components those are going to configure.
Enter database type, server name, port number and SID. Default oracle port
number and SID are “1521” and “orcl” respectively. It is good to create a separate
schema where your all configuration components will store. In my case I have
user bisp as schema.
©Business Intelligence Solution Providers | Installation of Essbase 11.1.1.3
learnhyperion.wordpress.com
14
EPM System common settings, Enter SMTP server name which is your computer
name. Enter administrator user name and password.
Database configuration settings click on next
©Business Intelligence Solution Providers | Installation of Essbase 11.1.1.3
learnhyperion.wordpress.com
15
Select application server deployment type “automatic”. However you can select
manual as well.
Deployment to Embedded Java Container
Settings for “Essbase” server configuration
©Business Intelligence Solution Providers | Installation of Essbase 11.1.1.3
learnhyperion.wordpress.com
16
By selecting Deploy Essbase as standalone one can login to Essbase without
shared service. The user authentication will happen by Essbase.
Status of component installation.
Installation of Essbase server is completed successfully.
After configuration of “Hyperion Essbase” all Hyperion services will show in the
services. Keep all Hyperion services manually, so that system services will not
get slow.
©Business Intelligence Solution Providers | Installation of Essbase 11.1.1.3
learnhyperion.wordpress.com
17
Components Verification You can check that Essbase server is working or not.
All Program à Oracle EPM system à Essbase à Administration Services
Click on Start Administration services console
Enter administrator server name, user name and password. This you just
specified while configuration.
Administration Services
Click ok
Click on “+” sign, this will show you connected server. You can check server
properties and user information.
©Business Intelligence Solution Providers | Installation of Essbase 11.1.1.3
learnhyperion.wordpress.com
18
You can add new server by Right clicking on Essbase server.
Enter server name, user name and password for adding server. Enter local host
as server name for connecting Essbase server with local system.
You can see the sample applications are showing inside the local host server.
©Business Intelligence Solution Providers | Installation of Essbase 11.1.1.3
learnhyperion.wordpress.com
19
Client Services When you open MS Excel, the excel spread sheet add-ins comes automatically.
This shows Essbase client is working properly.
Hyperion Smart View
Click on Essbase à Connect
Enter server name, user name and password. Click ok then select application
name and database.
©Business Intelligence Solution Providers | Installation of Essbase 11.1.1.3
learnhyperion.wordpress.com
20
Here you can analyze Essbase application in Excel.
Essbase Studio You can check that Essbase studio is up and running. First start server
When you start server, you will have this command prompt.
©Business Intelligence Solution Providers | Installation of Essbase 11.1.1.3
learnhyperion.wordpress.com
21
Enter server name and administrator as user name and “password” as password.
This is Essbase studio startup page.
Hyperion 11.1.1.3 Environment Variable The below environment variable gets set during Essbase Server installation.The
Environment Variable can be viewed from my computer Advance Properties.
©Business Intelligence Solution Providers | Installation of Essbase 11.1.1.3
learnhyperion.wordpress.com
22
Multi Server Environment In the multiple servers environment one EAS server can connect to multiple
Essbase server. This enables you to administer multiple Essbase servers from one
EAS Console.
There are two servers in my network one is Essbase server 11.1.1.3 and other
Essbase server 9.3.1.3. Multiple Essbase servers can be connected to single EAS
console. Below shows adding 2nd Essbase server to my EAS Console.
Connect remote Essbase server “vadminis-064ad2” to existing server EAS
“orgbisp”.
©Business Intelligence Solution Providers | Installation of Essbase 11.1.1.3
learnhyperion.wordpress.com
23
You can see connections done successfully both servers are not identical.
Similarly you can connect both sever as cross connection. Connect to Essbase
server 11.1.1.3 “orgbisp” to Essbase server “vadminis-064ad2”.
Note: - Essbase Server should be on shared mode.
You can access both servers from one EAS console.
Adding Multiple EAS in one EAS Console.
Multiple Essbase admin Services can be connected to one EAS console. Below
shows how to add multiple EAS server in one console.
Right click à Add Administration Server.
©Business Intelligence Solution Providers | Installation of Essbase 11.1.1.3
learnhyperion.wordpress.com
24
Enter server name.
You can see both servers are up and running.
For connecting other server enter server name and password.
Amit Sharma
Hyperion/OBIEE Trainer/Consultant