ESSENTIALS CATALOGUE - · PDF fileESSENTIALS CATALOGUE ... Large Preparations (Liner), Base or Sealer 1 1. Isolate the tooth and ... high bond strength, low film thickness and easy

www.biscocanada.comEnglish: 800.667.8811 Français: 800.211.1200

ESSENTIALS CATALOGUE Bringing Science to the Art of Dentistry

BISCO DENTAL PRODUCTS CANADA

Vers

ion

03.2

015

The SECURITY BLANKETfor PULPAL PROTECTION

2

Cal

l To

Ord

er: 8

00.6

67.8

811

TheraCal® LCA quick, easy and effective materialfor all your deep cavity preparations

Always apply to visibly moist dentin

and light cure for 20 seconds.

Clinical Tips

DEEP PREPARATIONS(Indirect Pulp Capping),

Large Preparations (Liner),Base or Sealer

1

1. Isolate the tooth andperform conventional cavitypreparation. Remove allinfected carious toothstructure. Leave dentin moist.

2. Apply TheraCal LC directly to the cavity floor of the preparation in incremental layers. Layer is not to exceed 1mm in depth.

3. Light cure each increment for 20 seconds.

PULP EXPOSURES(Direct Pulp Capping)

2

1. Under rubber damisolation, complete cavitypreparation.

2. Obtain hemostasis. Leave dentin moist.

3. Apply TheraCal LC directlyto the exposed pulp spreading onto the dentin inincremental layers. Layer is not to exceed 1mm in depth.

4. Light cure each incrementfor 20 seconds.

20

20

“An easy to use product with proven effectiveness;what more could a clinician want?”-Dr. Ron Jackson, Middleburg, VA

PHYSICAL PROPERTIES

Shear bond Strength1

(MPa)

WaterSolubility(μg/mm2)

Radiopacity(mm Al)

CalciumRelease

TheraCal™ LC 4.35(2.93) 0 2.63 188 (μg/cm2)

Prisma® VLCDycal® 0.94(0.92) 110(17) 0.79 NA

1. Visibly moist bondingPrisma and Dycal are registered trademarks of Dentsply Caulk.

A Protective Liner: Liquid Apatite at Your Fingertips• A protective liner for use under restorative materials, cements or other base materials.

• Pulp capping agent: TheraCal LC may be placed directly on pulpal exposures after hemostasis is obtained. It is indicated for any pulpal exposures, including carious exposures, mechanical exposures or exposures due to trauma.

TheraCal LC Stimulates Apatite Formation • Calcium release stimulates hydroxy apatite and secondary dentin bridge formation

• The alkaline pH promotes healing and apatite formation

3

Call To O

rder: 800.667.8811

Ordering Information

TheraCal LC Kit4 Syringes TheraCal LC (1g ea.) , Disposable Syringe Tips: 50

TheraCal LC Refill syringe 1 Syringe TheraCal LC (1g), Disposable Syringe Tips: 15

• ALL-BOND UNIVERSAL is the perfect chemical formulation for both self-etch and total-etch adhesion using only one bottle. ALL-BOND UNIVERSAL is used for: - ALL direct and indirect restorations - Resin bonding to ALL direct substrates - Protective varnish for glass-ionomer-based fillings

• ALL-BOND UNIVERSAL contains MDP monomers that enhance durability of adhesion, and allow bonding to indirect restorations (zirconia, alumina and metal).

• ALL-BOND UNIVERSAL’s mild acidity (pH > 3) allows universal compatibility with dual-cured and self-cured composite core build-ups and resin cements.

• ALL-BOND UNIVERSAL’s hydrophobic formula (resin friendly) results in improved durability of the bond by optimizing the seal.

• ALL-BOND UNIVERSAL readily flows into etched surfaces and offers both chemical and mechanical sealing following light curing.

• Clinical evaluation confirms the ease of use as a benefit leading to virtually no post-operative sensitivity.

TRULY UNIVERSAL

ALL-BOND UNIVERSAL™Light-Cured Dental Adhesive

Data compiled from respective manufacturer’s instructions for use. Trademarks are property of their respective owners.

* Requires Scotchbond Universal DCA (dual-cure activator).** Optibond XTR is a 2 bottle system requiring a primer and adhesive. Dual cure activator required for self-cured materials. Sold separately.

Clearfil SE Bond/Protect is a 2 bottle system requiring a primer and adhesive. Brush & Bond is indicated for use with composites and ceramics only. Brush & Bond requires an activator brush.

ALL-BOND UNIVERSAL’S single bottle system offers the compatibility and speed for everyday effective performance

4

Cal

l To

Ord

er: 8

00.6

67.8

811


ALL-BOND UNIVERSAL Kit1 Bottle ALL-BOND UNIVERSAL (6ml), 1 Syringe SELECT HV ETCH (5g)

ALL-BOND UNIVERSAL Refill (6ml)

ALL-BOND UNIVERSAL offers the flexibility for total-, self- or selective-etch procedures.

ALL-BOND UNIVERSAL is compatible with all light-cured, self-cured, and dual-cured resin composite and cement materials for all direct and indirect procedures.

Other single bottle adhesives may need more than 1 bottle for indirect restorations, but with ALL-BOND UNIVERSAL, NO activator is required!

Bisco Simplifies BondingSelective-etch

Self-etch

Total-etch

ALL-BOND UNIVERSAL was cemented withDUO-LINK™, and ScotchBond Universal was

cemented with RelyX™ ARC. Cements were selfcured.

DUO-LINK was used with ALL-BOND UNIVERSAL, and Mul-tilink Automix was used with Multilink Primer A and B. Relyx Unicem 2 is a self-adhesive resin cement. Cements were

selfcured. DENTIN WAS NOT ETCHED.

Dentin Bond Strength Comparison: Indirect Restorations

ALL-BOND UNIVERSAL utilizes MDP monomers in its unique formulation in one bottle that results in an enhanced durability of the bond compared

to two bottle systems.DR. MARCOS VARGAS (University of Iowa)

Research is ongoing (continued water storage long term) and not all testedmaterials are reported above. Data available upon request.

Durabilité = Confiance(Résistance à la traction sur la dentine après viellissement)

10

0

20

30

40

50

60

701 Week 6 Months

69

5760

57

68

57

µTB

S (M

Pa)

ALL-BONDUNIVERSAL™

(1 Bottle)

Clearfil™SEBond

(2 Bottle)

Optibond®

XTR(2 Bottle)

ALL-BOND UNIVERSAL utilizes MDP monomers in its unique formulation in one bottle that results in an enhanced durability of the bond compared

to two bottle systems.DR. MARCOS VARGAS (University of Iowa)

Research is ongoing (continued water storage long term) and not all testedmaterials are reported above. Data available upon request.

Durability = Confidence(Microtensile Bond Strength on Dentin with Aging)

10

0

20

30

40

50

60

701 Week 6 Months

69

5760

57

68

57

µTB

S (M

Pa)

ALL-BONDUNIVERSAL™

(1 Bottle)

Clearfil™SEBond

(2 Bottle)

Optibond®

XTR(2 Bottle)

Choose from TECHNIQUE A, B, C.

• Prepare cavity.

• Wash thoroughly with water spray.

• Use an absorbent pellet or high volume evacuation for 1-2 seconds, to remove excess water (do not dessicate).

SELF-ETCHING TECHNIQUE:

A

• Prepare cavity.


• Etch enamel and dentin using an etchant for 15 seconds. Rinse thoroughly.

• Remove excess water by blotting the surface with an absorbent pellet or high volume evacuation for 1-2 seconds, leaving the preparation visibly moist.

TOTAL-ETCHING TECHNIQUE:

15B

SELECTIVE ENAMEL ETCHING TECHNIQUE:

• Prepare cavity.


• Syringe etchant onto cut and uncut enamel. Leave in place for 15 seconds. Use high volume evacuation to remove the etchant.

• Rinse thoroughly. Use an absorbent pellet or HVE for r 1-2 seconds, to remove excess water (do not dessicate).

15C

STEP 1

Apply two separate coats of ALL-BOND UNIVERSAL, scrubbing the preparation with a microbrush for 10-15 seconds per coat. Do not light cure between coats.

Evaporate solvent by thoroughly air-drying with an air syringe for at least 10 seconds, there should be no visible movement of the material. The surface should have a uniform glossy appearance; otherwise, repeat Step 2-3. Light cure for 10 seconds.

15

10

STEP 2STEP 3

Continue with placement of the restorative material.

STEP 4

Best for all Dentin

Best for all Enamel

Best for Combination

5

Call To O

rder: 800.667.8811

DUO-LINK UNIVERSAL cement dispensed into crown

Seated crown Final restoration Easily identifiable on a radiograph

Courtesy of Adamo Notarantonio, DDS, AAACD, FICOI

Easy Clean-up Cementation for All Ceramic, Zirconia

and CAD/CAM Restorations

• UNIVERSAL - FOR ALL CEMENTATION PROCEDURES Crowns, bridges (fixed prostheses), inlays, onlays, and posts/dowels, fabricated from metal, composite, porcelain, ceramic, zirconia, alumina, CAD/CAM restorations, etc.

• EXTREMELY EASY CLEAN-UP Formulated to allow for quick and easy removal of excess cement

• HIGHLY RADIOPAQUE Easily identified on radiographs for quick and effective diagnosis

• HIGH DEGREE OF CONVERSION High degree of conversion in both light- and self-cured modes ensures a strong, long lasting restoration

• EASY TO USE Auto-mix, dual-syringe provides a consistent mix for immediate delivery

• CAD/CAM RESTORATIONS Ideal for all chairside and lab-fabricated restorations

• NEW SHADES Universal shade has some translucency at low film thickness and Milky White shade is more opaque and can be used to mask darker tooth preps

35

30

25

20

15

10

5

0

Light Cure (MPa)

NX3Nexus™/Optibind®

XTR

Rely X™

Ultimate/Scotchbond™

Universal

Multilink™

Automix EZClearfil™

Esthetic EX/Clearfil™ DC

Bond

DUO-LINKUNIVERSAL™

Self Cure (MPa)

SHEAR BOND STRENGTH TO DENTIN (MPA)Shear bond strength generated using Ultradent method on dentin

6

Cal

l To

Ord

er: 8

00.6

67.8

811

3. Air-dry 4. Light cure for 10 seconds

5. Apply DUO-LINK UNIVERSAL to restoration

6. Seat the restoration

2. Apply ALL-BOND UNIVERSAL

7. Optional: Light cure

SELF-ETCHING: Wash thoroughly with water spray. Remove excess water (do not desiccate)

TOTAL-ETCHING: Prepare cavity. Wash thor-oughly with water spray, apply phosphoric acid etchant and rinse thoroughly. Preparation should be visibly moist

OR

Restoration Treatment*

1. Apply PORCELAIN PRIMER to restoration

2. After try-in, decontaminate the internal surface

Glass Ceramics/porcelain (silica-based) or Lithium Disilicate/Silicate

Tooth Preparation and Cementation*

1. Apply Z-PRIME Plus to restoration

2. After try-in, decontaminate the internal surface

Metal, Zirconia, Alumina, Composite

1. Choose SELF-ETCHING orTOTAL-ETCHING technique below.

* Refer to complete instructions for detailed techniques.

DUO-LINK UNIVERSAL™ adhesive resin cement is specially formulated for cementation of ALL indirect restorations and provides all of the desired properties for universal cementation: high radiopacity, high mechanical strength, high bond strength, low film thickness and easy clean-up.

ALL-BOND UNIVERSAL™ is the first TRULY UNIVERSAL dental adhesive that combines etching, priming and bonding in ONE bottle.

Z-PRIME™ Plus is a single-component priming agent used to enhance adhesion between indirect restorative materials and resin cements. It is a versatile primer for surface treatment of zirconia and alumina ceramics as well as metals/ alloys, composites and endodontic posts.

PORCELAIN PRIMER is a silane coupling agent used to improve the chemical bond between porcelain restorations and resin cements resulting in increased bond durability over time.

7

Call To O

rder: 800.667.8811


REFILLS 1 Dual Syr. (8g) (Milky White)REFILLS 1 Dual Syr. (8g) (Universal)

DUO-LINK UNIVERSAL SYSTEM KIT1 Dual-Syringe DUO-LINK UNIVERSAL Shade: UNIVERSAL (Base/Catalyst, 8g mixed), 1 Bottle ALL-BOND UNIVERSAL (6ml), 1 Bottle Z-PRIME Plus (2ml), 1 Bottle Porcelain Primer (3ml),

8

Cal

l To

Ord

er: 8

00.6

67.8

811 • The only etchants on the market with BAC

• The only etchants thickened with polymers

UNI-ETCH ®w/BAC / ETCH 37 ®

w/BAC

The addition of Benzalkonium Chloride provides enhanced anti-microbial action and bond durability by inhibiting MMP’s activated by acid-etching dentin. Thickened with polymers, Bisco’s etchants rinse away easily and leave tooth surfaces free of residue.

The degradation of acid etched dentine was shown to be caused by the presence of endogenous MMPs in dentine. BAC is effective at inhibiting both soluble recombinant MMPs and matrixbound dentine MMPs in the absence of resins.

MMP = Matrix Metalloproteinase• A family of proteolytic enzymes that are capable of

degrading the dentin organic matrix after demineralization by acid-etching dentin (Tjaderhane et al., 1998)

• Collagen eating enzyme

• Activated by acid on dentin

Activated MMP’s - 12 months later Inhibited MMP’s—12 months later

Cement

Adhesive

Hybrid Layer

Dentin

Cement

Adhesive

Hybrid Layer

Dentin

Pashley et al. MMP inhibitor preserved H-layer.Suggested to use CHX in-vivo. (JDR 2004; 83;216)

2 Ways to Inhibit MMP’sPreserving the Hybrid Layer

Use an etch with BAC (Benzalkonium Chloride)

UNI-ETCH ®

Rewet dentin after etching with 2% CHX (Chlorhexidine Gluconate)

Cavity Cleanser ®

• Thixotropic

• Coloured for easy visualization and contrast

• Washes off easily without leaving residue

• 35% High Viscosity Phosphoric Acid Dentin/ Enamel Etchant

SELECT HV ETCH delivers a smooth, non-stringy material which can be used in everyday restorative procedures

Ideal pinpoint accurate viscosity for self-etch techniques

Ask for a SAMPLE

“Select HV Etch has been my go to product for quite sometime thanks to its viscosity and tip size that allow very precise placement of the etch during a selective etch technique.”

-Dr. Lee Ann Brady, Phoenix, AZ


32% UNI-ETCH w/BAC• Syringe Pack (4x5g) • 30g Refill Bottle

37% ETCH w/BAC• Syringe Pack (4x5g) • 30g Refill Bottle


SELECT HV ETCH Bulk Syringe (30ml)SELECT HV ETCH Syringe Pack (4x5g)

Etch restoration with 4% PORCELAIN ETCHANT for 20 seconds, rinse and dry. Apply a coat of silane, wait 30 sec and dry with air syringe.

Choose either the SELF-ETCH, TOTAL-ETCH or SELECTIVE-ETCH technique.

Based on thickness on restoration, choose either eCEMENT Dual-Cured or eCEMENT Light-Cured Resin cement.

After try-in, decontaminate internal surface of restoration.

Scrub in two coats of ALL-BOND UNIVERSAL. Light cure.

Seat the restoration and follow recommended procedure for cleaning margins. Light cure.

RESTORATIONPREPARATION

1

TOOTHPREPARATION

2

CEMENTATION

3

BISCO’s Award Winning Technology and Formulations: The eCement system provides simple and strong placement of lithium disilicate

This ALL-IN-ONE KIT contains a combination of innovative and proven products to save you time and money when placing lithium disilicate (e.g. IPS e.max®*) restorations:

eCEMENT Technique

Veneers

Inlays

Onlays

Crowns

Three-unit bridges

All common CAD/CAM blocks made of Lithium Disilicate

NEW

9

Call To O

rder: 800.667.8811


eCEMENT Adhesive Cementation System Kit• 1 Dual-Syringe eCEMENT Dual-Cured Resin Cement (Base/Catalyst, 8g mixed)• 1 Syringe eCEMENT Light-Cured Resin Cement shade: TRANSLUCENT (4.5g), • 1 Syringe eCEMENT Light-Cured Resin Cement shade: Milky Bright (4.5g), • 1 Bottle ALL-BOND UNIVERSAL (6ml), • 1 Bottle PORCELAIN PRIMER (3ml), • 1 Syringe 4% PORCELAIN ETCHANT (5g), • 1 Syringe SELECT HV ETCH (5g), Accessories, Instructions/MSDS

eCEMENT (Dual-Cured) Dual-Syringe (8g)• Base/Catalyst, 8g mixed

eCEMENT (Light-Cured) (4.5g)• Shade: A1, TRANSLUCENT et MILKY BRIGHT


CORE-FLO DC Natural / A1 - Opaque White Intro Kit• 1 Dual-Syringe CORE-FLO DC Shade: Natural / A1, • 1 Dual-Syringe CORE-FLO DC Shade: Opaque White, • 1 Syringe UNI-ETCH® w/BAC (5g), • 1 Bottle ONE-STEP® (2ml), Accessories, Instructions/MSDS Plus a

dual-syringe dispenser is also provided

REFILLS (Natural, Opaque White, or Blue) • CORE-FLO DC - 1 Dual-Syringe (Base/Catalyst 8g, mixed), Accessories,

Instructions/MSDS

High Strength and low water sorption assures a strong foundation for crowns and direct restoratives - cuts just like dentin

Non-Slumping material allows for predictable placement and a simplified core build-up and post cementation technique

Low Shrinkage properties allow it to be used effectively as a dentin replacement material

Excellent Flowability - void-free flow makes it ideal for post cementation

Dual-Cured Flowable Core Build-Up,Dentin Replacement Material

CORE-FLO™ DC

Post Cementation Core Build-Up Dentin Replacement

3 different uses… 1 Amazing product

Core-Flo DC has excellent flowability, making it the ideal

material for void free post.

This product stacks beautifully to help create perfect core-build ups and cuts like dentin when cured so that your bur speed is consistent.

Core-Flo DC’s low shrinkage and dual curing properties make it the perfect product for bulk fill / dentin

replacement.

“Efficiency is about doing highly competent work with as little time and effort as possible and Core-Flo DC is one of the most versatile products we use in our quest for efficient excellence.”

-Dr. Jack D. Griffin, Eureka, MO

10

Cal

l To

Ord

er: 8

00.6

67.8

811

• Unparalleled bond strengths to Zirconia, Alumina and Metal restorations

• Compatible with light-cured and dual-cured resin luting cements

• Versatility and durability with many different substrates and can be used

for intra-oral repairs

• Convenient, single bottle delivery offers ease of dispensing

• Significantly enhances bond strengths of other resin cements*

UNIQUE BENEFITS

1 2

Z-PRIME™ PLUS is intended for use as a surface treatment for the following indirect restoration substrates

Zirconia

Composite

Alumina Intra-oral Repairs

Metal /Alloy

Endodontic Posts

Z-PRIME™ PLUS

BISCO’s Z-PRIME™ PLUS is a single-component priming agent used to enhance adhesion between indirect restorative materials and composite resin cements.

Z-PRIME™ PLUS significantly enhances bond strengths to Zirconia, Alumina and Metal substrates more or unlike any other surface primer on the market!Compatible with light-cured and dual-cured resin luting cements…phosphoric and carboxylic acid monomers.

Zirconia-Alumina-Metal Primer

Z-PRIME™ PLUS

Shear Bond Strength of Z-PRIME™ PLUS withDUO-LINK™ (S/C) on Different Substrates

35

30

25

20

15

10

5

0

SB

S(M

Pa)

Zirconia

Bond Strengths usingZ-PRIME™ PLUS

Bond Strengths without the use ofZ-PRIME™ PLUS

Alumina Titanium High Noble Alloy

“Confidence in Indirect Adhesion”


• 1 Bottle Porcelain Primer (3ml), 1 Syringe 9.5% Porcelain Etchant (5g), 1 Syringe Barrier Gel (5g), 1 Bottle Z-PRIME™ Plus (2ml), 1 Bottle Porcelain Bonding Resin (6ml), 1 Bottle Opaquer Catalyst (3ml), 1 Bottle Opaquer Base Universal (3ml), Accessories, Instructions/MSDS


1 Bottle Z-PRIME™ PLUS (4ml) Technique Card, Instructions / MSDS)

INTRAORAL REPAIR KIT

Indications for Use • Repair of Porcelain & Lithium Disilicate Restorations• Repair of Porcelain-Fused-to-Metal or Zirconia/Alumina Restorations• Repair of Direct or Indirect Composite Restorations

BISCO’s Intraoral Repair Kit provides all the materials necessary to repair the framework of broken or damaged restorations intraorally. Once the operative site is properly prepared, an esthetic and durable repair can be successfully achieved utilizing a resin composite material. The Intraoral Repair Kit is a cost effective option as a practical restorative solution and comes complete with BISCO’s Z-PRIME™ Plus, Porcelain Primer, Porcelain Bonding Resin, Dual-Cured Opaquer, Porcelain Etchant (9.5% HF) and Barrier Gel.

11

Call To O

rder: 800.667.8811

12

“I have found none better than the Double Taper Light-Post Illusion X-RO in terms of radiopacity, light transmission

and ease of placement.”-Dr. Ross Nash, Huntersville, NC

Double Taper LIGHT-POST™ ILLUSION™

X-RO™

Patented Quartz Fiber technology mimics physical properties of dentin.

• 50% MORE RADIOPAQUE

• 30% MORE RETENTIVE

• 20% STRONGER

Greater radiopacity allows clinicians easier visual on radiographs

Corrosion-free and biocompatible

Flexural strength at 1800 MPa - 2000 MPa

Elastic modulus similar to dentin aids in stress distribution

Improved surface roughness increases push out (bond) strength to the post by nearly 33% eliminating the need for chairside silane coatings and surface treatments

Patented color-on-command technology simplifies the task of removing the post in the event retreatment is ever required

CEMENTATION- TOTAL-ETCH (ALL-BOND 3)

- CORE-FLO DC

CEMENTATION- TOTAL-ETCH (ALL-BOND 3) - DUO-LINK UNIVERSAL

CEMENTATION- BISCEM

Apply Bisco 32% or 37% phosphoric acid etch to the canal. Etch for 15 seconds.Rinse.

Apply Bisco 32% or 37% phosphoric acid etch to the canal. Etch for 15 seconds.Rinse.

Apply 1-2 coats of Bisco adhesive. Blot excess from canal until dry.

Apply 1-2 coats of Bisco adhesive. Blot excess from canal until dry.

Light cure for 10 seconds or let it self-cure, if usingALL-BOND 3.

Light cure for 10 seconds or let it self-cure, if usingALL-BOND 3.

Coat the post with 1 coat of adhesive. Light cure for 10 seconds.

Express CORE-FLO™ DC.

Express BISCEM

Express DUO-LINK UNIVERSAL

10


10


10

15

15

10

10

OPTION A:

OPTION B:

OPTION C:

*Follow this protocol when Post Space length in the root is 8mm or greater

*Follow this protocol if Post Space length in the root is less than 8mm.

*Follow this protocol if Post Space length in the root is less then 8mm.

Self-Adhesive Luting CementBisCem™

Cal

l To

Ord

er: 8

00.6

67.8

811

Express CORE-FLO™ DC.

Express DUO-LINK UNIVERSAL

X-RO Intro Kit 20 Posts + 4 Drills Finishing Drill (1)X-RO Post Refill (10)

0.8 0.9 1.0 1.2

1.25 1.5 1.8 2.2

.04 .06 .08 .10

.02 .02 .02 .02

#0.5 #1 #2 #3

D CEJ

D 10mm

D 5

Developed at the University of Montreal, this is the first post to adapt to the treated canal, rather than the reverse. These tapers and diameters are derived from thousands of measurements on hundreds of endodontically treated teeth.

Continue to express CORE-FLO™ DC around the post to build-up the core.

Remove excess material and light cure for 40 seconds. Optional: wait 7 minutes for self cure.

Air dry and light cure for 10 seconds.

Complete preparation priorto impression.

10 40

7min.

Clean all surfacesSeat the post, maintaining firm pressure for 5-10 seconds.

Apply UNI-ETCH to the tooth and post. Etch 15 seconds. Rinse.

Apply 2 coats of ALL-BOND 3, agitate 10-15 seconds.

155-10 10-15

1

5

2

6

3

7

4

8

CORE BUILD-UPwith CORE-FLO DC

13

Call To O

rder: 800.667.8811

Sickle scalers

Sickle LM204S, Posterior LM 303-304S XSI

Micro Sickle, Anterior/Posterior LM204SDLM 301-302 XSI

Universal Sickle LM 23, PosteriorLM 313-314 XSI

Laplander, Anterior/PosteriorLM 148-149 XSI

Scaler H6-H7, AnteriorLM 146-147 XSI

Designed for the removal of supragingival calculus, ideal for the interproximal areas.

Design - triangular cross section - two cutting edges - sharp, pointed toe - face perpendicular to the lower

shank

Full Catalogue Available

Mini Sickle, Anterior/PosteriorLM 311-312 XSI

Elastic, ergonomic surface material and optimal contouring- comfortable and non-slip grips

Stylish colors and visible product names- easy identification

Optimal rigidity- excellent sensivity and efficiency

Exceptional finishing- outstanding corrosion resistance

DuraGradeMAX® steel- extremely wear resistant

Solid and reliable mounting- safe even in hard use

Special alloyed metal core- lightweight structure- metal-to-metal connection for enhanced tactile sensitivity

No more hand-fatigue with larger diameter, silicone surfaced handlesMore and more hygienists and doctors are choosing LM’s ErgoMax™ instruments. They feature larger diameter (11.5 mm), ergonomic, silicone-surfaced handles. LM-ErgoMax™ products provide you with a comfortable, non-slip grip and great tactile sensitivity. These benefits result into a significant reduction, or elimination, of hand-fatigue, finger and hand pain as well as prevention of CTS.

14

Cal

l To

Ord

er: 8

00.6

67.8

811

Gracey curettes

Universal curettes

Gracey curettes are area specific instruments, designed for all types of calculus removal and root planing. Graceys have only one cutting edge creating a “safe-side” enabling carefree deep periodontal cleaning.

Designed for the removal of sub- and supragingival calculus.

Design - instrument’s face is inclined, the downslope

side being the sharp, cutting edge - one cutting edge per tip - rounded toe for safe subgingival access

Design - two cutting edges - rounded toe for safer subgingival

access - face perpendicular to the lower

shankCurette LM 15-16, Posterior

LM 225-226 XSIMcCall 13S-14S, Posterior

LM 222-223 XSI

McCall 17-18, Anterior/PosteriorLM 277-278 XSIBarnhart 5-6, Posterior

LM 227-228 XSI

- shorter lower shank - ideal for posterior

Columbia 4L-4R, PosteriorLM 219-220 XSI

- popular universal - short working ends and lower shank

Columbia 13-14, PosteriorLM 237-238 XSI

Incisors

Premolars & Molars

All surfaces

Buccal-lingual surfaces

Mesial surfaces

GRA 11/12

GRA 15/16

Distal surfaces

GRA 1/2

GRA 3/4

GRA 5/6

GRA 7/8

GRA 9/10

GRA 13/14

GRA 17/18

Application of the area specific Gracey curettes

Variations of the Gracey curettes available

Mini Macro Standard Rigid

Call To O

rder: 800.667.8811

15

Special instrumentsDesigned for the removal of supragingival calculus, ideal for the interproximal areas.

Design - two elliptical cutting edges,

rounded toe, raised face design to construct both sides of Gracey, mesial and distal.

Dual-Gracey

Furcator KSLM 259-260 XSi

Furcation instruments

H-Scaler IDistal, lingual anteriorLM 112-156 EASi

H-Scaler IIMesial distal, anterior LM 156-157 EASi

Micro Sickle EASiInterproximals, anterior LM 301-302 EASi

The curved handle allows access to difficult-to-reach areas such as distal surfaces of molars and lingually inclined incisors.

Provides easy access to mesial and distal surfaces of molars even with smaller oral aperture.

Micro sickle, like 204SD scaler, great for anterior interproximal areas.

ExplorersFor diagnosing calculus and exploring of pockets, restorations

and furcations.

- slim and super flexible tips - sliding smoothly into the pockets - excellent tactile sensitivity for accurate calculus detection - contemporary version of the staple #11-12 explorer

Flexplorer LM 11F-12F XSI

LM-ErgoAccess - specialty instruments for calculus removal from problematic areas

Dual-Gracey, Posterior/AnteriorLM 215-216 XSI

Mini Dual-Gracey, Posterior/AnteriorLM 215-216M XSI

- fine, angled micro-size excavator - designed for cleaning the roof and inner surfaces

of furcations, as well as concavities and grooves in them

- also great for cleaning narrow interproximals concavities in incisors and premolars.

16

Cal

l To

Ord

er: 8

00.6

67.8

811

Titanium implant instruments

LM extraction instruments uniquely combine ergonomics, Scandinavian design and functionality. They feature comfortable,non-slip ErgoTouch™ handles and are well-balanced and lightweight.

LMLiftOut LMSlimLift LMTwistOut

Luxating instrument with fine blade foratraumatic extraction.

Extremely slim blade to reach the narrow spaces. Ideal for implant preparations.

Sturdy extraction instrument for strong elevating. You can apply more force, torque and twist.

For atraumatic luxating For strong elevating

4.4RATING

LM-ErgoMix™ titanium implant instruments are made of soft titanium alloy, making them safe for the implant abutments. The unique Ergomix structure ensures excellent tactile sensitivity and optimal rigidity.

Gentle, but effective

Extraction instruments

Implant Mini Gracey 11/12, Posterior - mesialLM 211-212MTi EM

Implant Mini Universal Curette, Posterior/AnteriorLM 283-284MTi EM

Implant Mini Gracey 1/2, AnteriorLM 201-202MTi EM

Implant Mini Gracey 13/14, Posterior - distalLM 213-214MTi EM

Tip Lock grip Handle Pat. Pend.

Straight Blade:3mm, 4mm, 5mm

Curved Blade:3mm, 4mm, 5mm

Full Catalogue Available

Straight Blade:2.5mm, 3mm, 4mm, 5mm


Straight Blade:3mm, 4mm, 5mm


Call To O

rder: 800.667.8811

17

Sectional Matrix System

Cal

l To

Ord

er: 8

00.6

67.8

811

Xtra Retention,Even on…

- Short Teeth- Distal of Canine- Difficult Dentition

XR.

Perfect contacts with zero flash.

Eliminates ring “Spring-Off” on short, malpositioned or pedodontic teeth

Significantly improves retention between the canine and first bicuspid

Ensures true matrix band adaptation, vastly reducing flash and finishing time, while improving the quality of contacts

Dynamic Tip Angle™combined with retentive tip extensions adapts interproximally for an unsurpassed, tenacious grip!

Soft-Face™ tines hug matrix bands to the tooth for fl ash-free convenience!

The new 3D XR Extra Retention ring delivers outstanding performance even on difficult dentition and eliminates ring “Spring-Off.“

New advanced polymer tips last longer.

Firm core delivers separation force interproximally where it is most effective.

New tip geometry eliminates ring “Spring-Off” on diffi cult dentition. Restore short or malpositioned teeth and between the canine/bicuspid with confi dence. It even grips on top of rubber dam clamps!

Soft-Face™ tips hug the matrix band to the

tooth–eliminating flash.

18

Call To O

rder: 800.667.8811

Unquestionably Smooth.Garrison’s All-New eZr™ polishers enable clinicians to easily and safely adjust and polish zirconia and lithium disilicate reducing the possibility of chipping and microfracturing.

• Proprietary diamond impregnated polisher reduces possibility of chipping and microfracturing.

• Prevents over-heating that could lead to premature failure.

• Eliminates the need for polishing paste, reducing overall cost per procedure.

PerForm is a cure-through contact forming instrument you press directly into the first increment of uncured composite on Class II restorations. Apply mesial or distal pressure to place the interproximal contact where you want and cure. PerForm allows you complete control over the location-both the height and breadth—of the contact on Class II restorations. Whether you’re using one of the popular sectional matrix systems, traditional Tofflemire-style matrices or retainerless systems like Reel Matrix, PerForm puts YOU in control.


PerForm Kit 2 pack (small or large tip)

PerForm Kit Assorted Pack 1 large tip, 1 small tip instrument, 2 pack


eZr™ Complete System KitKit includes 2 grinders and 6 polishers

small large

19

The WOlf Black Label highspeed handpiece offers superior quality and optimal ergonomy with an unbelievable 24 month warranty.

Trust your Inst incts

WOlf B lack Label Highspeed Handpiece

Unprecedented va lue for money in a h ighspeed handpiece

SATISFACTION

GUA R A N T EED

24 Monthswarranty

The WOlf Black Label offers:

+ Maximum cutting power+ Quiet working environment+ Extreme bur concentricity means better work precision+ Available in Medium and Mini head.

Features:

+ 24 Months warranty+ 21 Watts of power+ LED coupling and 3 port spray+ Great bur concentricity+ Quiet operation

NEW

Cal

l To

Ord

er: 8

00.6

67.8

811

20


Handpiece onlyHandpiece + 6 Pin Coupler

Call To O

rder: 800.667.8811

WOLF BLACK LABEL

Operating Pressure 2.1 - 4.2 (30-60) bar (psi)

Recommendation >2.8 (>40) bar (psi)

Air consumption 39-55 NI/min

Speed with no load - WBL-KV MED* 350’000 rpm

Speed with no load - WBL-KV SMA* 390’000 rpm

Noise level - WBL-KV MED* 59-62 dB (A)

Noise level - WBL-KV SMA* 60-64 dB(A)

1.Values indicated are measured using recommended air pressure setting and the relevant norm for measuring protocal

WOLF BLACK LABEL

Head height - WBL-KV MEDIUM HEAD 12.8 (0.504) mm (in)

Head height - WBL-KV SMALL HEAD 12.2 (0.480) mm (in)

Bur runout (concentricity) <0.02 mm

Handpiece mass (without coupling) 69 G

Light guide Glass rod

Spray details 3-port spray from integrated spray chamber

Connection of quick-connect coupling attachments KaVo Multiflex standard

Light colour warmth for coupling LED light / 2’000 Kelvin

WOlf B lack LabelHighspeed Handpiece

madein Germany

“WOlf Black Label handpieces work like a charm. I have not witnessed any difference between it and my other German handpiece except that it is quieter for the patient.The price is unreal !”

Sam Kherani, DDSCanada

“The WOlf Black Label is quiet, durable and reliable. The cost is similar to replacing a turbine. The 2 year warranty is an added bonus”

Bob Margeas, DDSUSA

“I have tried the WOlf Black Label and am very satisfied. It has the best quality/price ratio.”

Guy Duquet, DDSCanada

“The Wolf Black label blows away many of the other handpieces that cost hundreds of dollars more. The 2 year turbine warranty, smooth cutting, high torque, and quietness make this handpieces one of the great values in dentistry.”

Jack Griffin DDSUSA

“WOlf Black Label handpieces truly are exceptional in both quality and value. Finally a piece of equipment that truly makes dentistry effortless !”

Les Rykiss, DDS Canada

“Light, quiet and powerful.. A winning black label combination”

Howard Glazer, DDS

“I find the WOlf Black Label to be ergonomic, efficient, lightweight, durable and affordable. It helps improve efficiency in my practice and I recommend it.”

Paresh Shah, DDSCanada

“The WOlf Black Label is a total gamechanger. I prefer it to other high end German made handpieces. It has torque and it gives me thetactile feel I need for precision dentistry. Best of all is the turbine warranty and the price!RIDICULOUS! This is a no brainer...”

Elliot Mechanic, DDSCanada

21

Ordering Information Ordering Information

Padded brush tip

Standard Kit4 x 1.5ml syringes

01-V502804

Standard Kit4 x 1.5ml syringes

01-V504600

Bulk Syringe Refill 30ml syringe01-V503555

Bulk Syringe Refill 30ml syringe01-V504660


100 / cup (19ga)01-V312100

20 / cup (19ga)01-V312102


500 / bag01-V321450

100 / cup01-V321400

Bulk Syringe Kit30ml syringe,

20 x1.5ml syringes, 20 Stat-Flo tips

01-V503550

Bulk Syringe Kit30ml syringe,

20 x1.5ml syringes, 20 Stat-Flo tips

01-V504650

Value Pack 50 x 1.5ml

01-V502800

Value Pack 50 x 1.5ml

01-V504640

15.5% Ferric Sulfate Hemostatic GelStops bleeding when completing impressions, restorations, crown and bridge procedures.

CLEAR Hemostatic AgentStops bleeding when completing impressions, restorations, crown and bridge procedures.

Quick-Stat™ FS Quick-Stat™ FREE

For application of hemostatic agents

Stat-Flo™ Tips

De

nta

l P

rod

uc

ts

Cal

l To

Ord

er: 8

00.6

67.8

811

22

Superior placement control = Better outcomes!

Our new Spira-Flo™ brush tips offer controlled delivery of viscous materials, etchants and resins used in most restorative procedures.

Spira-Flo™

• Ferric sulfate provides faster, longer lasting hemostasis• Controlled delivery• Viscous material stays in place when delivered• Gentle to hard and soft tissues

• Curved cannula for optimal visibility• Padded brush tip reaches subgingival to provide superior hemostasis• Universal luer lock style hub

• Curved cannula for optimal entry• Internal spiral channel• Adjustable brush tip fiber length• Minimizes bubbles

• Aluminum Chloride viscous gel that stays where its placed• Surfactant allows for better wound penetration• Viscous, colorless, non-staining gel• Controls minor bleeding fast• Comes with Stat-Flo™ padded tip

VISTA’s Essentials


Vista 3cc (100 / box)

01-V316030

Vista 1.2cc (100 / box)

01-V316002

Vista 5/6cc (100 / box)

01-V316060

Vista 12cc (100 / box)

01-V316012


50 / cup 01-V312302

20 / cup 01-V312300


Vista-Cal™ Kit01-V502600


Vista US-12 (50 / box) 01-V316600


23ga - Blue (100 / cup)

01-V315623

30ga - Purple(100 / cup)

01-V315630

27ga - Yellow(100 / cup)

01-V315627

De

nta

l Pro

du

cts

Closed End,side-port delivery

• Bendable 1” tip• Universal luer lock style hub• Closed end, side-port delivery

• Bendable 1” tip• Universal luer lock style hub• Slotted and side-vented for safe irrigation

Designed with the safety of irrigating root canals and periodontal pockets in mind.

Vista-Probe™- Irrigating Tips

US-12 Utility Syringe

Call To O

rder: 800.667.8811

23

For temporary filling / disinfection of root canals.

Vista-Cal™

Includes: (4) 1.2ml pre-filled ”High Pressure” syringes and (10) Visco-Tip™

Unique polyurethane tip that flexes with your canal!

Visco-Tip™

THE ONLY TIP specifically designed for easy delivery of Calcium Hydroxide and flowable composites!

Patented

Irrigating Tips designed for irrigation of canals, pockets and fistulas.

Appli-Vac™- Irrigating Tips

Slotted and side-vented for safe irrigation

• Disposable 12cc utility syringe• Can be used with silicone- and

rubber-based impression materials

• 12.5 PH aqueous solution• Contains no more than 35% Calcium Hydroxide paste• Includes the patented Visco-Tip™ and the new High Pressure

syringe to provide the most effective delivery of Calcium Hydroxide

For surgical site and post- surgical home irrigation

Designed for surgical site irrigation.

• Graduated (cc) increments• Textured finger grips to minimize

slippage• AUTOCLAVABLE, non-sterile• Standard luer lock style

• Bendable, flexible tip• Universal luer lock hub with the new

Secure-Lock™ hub design

Luer Lock Syringes


23ga - Blue (100 / cup)

01-V315523

30ga - Purple(100 / cup)

01-V315530

27ga - Yellow(100 / cup)

01-V315527

Documents

ESSENTIALS CATALOGUE - · PDF fileESSENTIALS CATALOGUE ... Large Preparations (Liner), Base or Sealer 1 1. Isolate the tooth and ... high bond strength, low film thickness and easy