Upload
others
View
7
Download
0
Embed Size (px)
Citation preview
Since the company was founded in 1961, Remote Control has become the standard for excellence in the field of valve and damper automation for the oil, gas, power, water, and waste treatment industries around the world.
As established leaders in actuation technology, we owe our success to a commitment to quality at every stage, and at every level, of Remote Control’s operations.
At the heart of the company is an exceptional workforce of highly trained, forward thinking engineers, technicians, and sales support staff. Each play a crucial role in maintaining Remote Control’s unrivaled reputation for innovation, reliability and first class after sales support.
With several fluid power actuator lines and additional electric actuators available, we are able to offer creative solutions and design systems for virtually any application.
Contact Remote Control for your operational or safety application requirements. We will work with you from conception, to design, to manufacture.
Remote Control Actuators - Quality Controlled
The Remote Control RCI265 Series actuator offers a torque that fills the gap between the RCIO260 and RCIO270 sizes. This model is the most advanced scotch yoke design Remote Control offers with external travel stops in both direction for ± 4 degrees of adjustment. It is available in both double acting and spring return, and incorporates the standard features from the rest of the 200 series Actuators. The pistons are guided in two places with reinforced Teflon bearings which ensure a long seal life. Also in addition an external cam can be customized for different rotations.
Remote Control Range RCI265
Specifications
Pressure Range (Working) 116 PSI continuous
Torque Output Up to 9,336 In-Lbs
Temperature Range Standard: -4° F to +175° F High: +32 F to +302° F Low: No option available
Stroke 90° - 4°
Media Dry or lubricating air, non corrosive gas, water, or light hydraulic oil.
Lubrication None required, all moving parts are factory lubricated for the cycle life of the actuator. For high load refer to IOM.
Construction Suitable for indoor or outdoor installation.
Bottom Mounting ISO 5211/DIN 3337
Top/Solenoid Mounting VDI/VDE 3845 (NAMUR)
Warranty 3-Years up to 1 million cycles (subject to proper use and maintenance)
Technical Data
Features Weights
Materials of Construction
Description Standard Material Finish
Actuator Body Extruded Aluminum Alloy AnodizedEnd Cap Die Cast Aluminum Alloy Epoxy CoatedDrive Shaft Steel Plated Piston Die Cast Aluminum Alloy AnodizedGuide Acetal Resin (POM) PlainO-Rings Nitrile ----Springs Spring Steel Epoxy CoatedHardware Stainless Steel Plain
• External adjustable limit stops in open and closed positions, ± 4 degrees
• Wide air channels for short operation times
• Compact design of end plates, for minimized air consumption
• Easily changeable cam for different turning angles (accessible without dismantling the actuator)
• NAMUR solenoid interface
• High interface position for easy installation of both air and electric connections
• Anodized cylinders, epoxy coated end caps fastened with stainless steel hardware for corrosion resistance
Actuator Weights
Model Weight (Lbs.)
RCI265DA 42
RCI265SR 54
RCI265DAM 59
RCI265SRM 68
Inside the RCI265 Actuator
Item Description Qty Item Description Qty1 Adjusting Screw 2 22 Spring Guide (SR Only) 2
2 Lock Nut 2 23 Spring External (SR Only) 2
4 Screw 8 24 Spring Internal (SR Only) 2
6* End Plate Sealing 2 25 Spring Housing (SR Only) 2
7 Cylinder 1 26 Pre-Tensioning Screw (SR Only) 2
8 Scotch Yoke 1 27 Indicator 1
9* Support Element 2 31* Circup, Upper 1
10 Piston 2 32* Middle Washer 1
11 Scotch Yoke Screw 1 33* Support Washer, Upper 1
12* O-Ring 2 36 Bearing, Lower 1
14* Support Band 2 37 Guide Ring 1
15 Drive Shaft 1 38* O-Ring, Lower 1
16 Bearing Upper 1 39* Support Washer, Lower 1
17 End Plate (DA Only) 2 40* Circup, Lower 1
18* O-Ring, Upper 1 64 Stop Ring 1
19 Support Ring 2 65 Washer 2
20 Piston Pin 2 66 Protective Cover 2
21 Piston Roller 2 67 Nut 2
*Indicates Seal Kit Items
DA Air Consumption (Free Air)Model Anti-Clockwise
RotationClockwise Rotation
RCI265 0.80 (U.S. Gallon) 0.88 (U.S. Gallon)
Operation Times DA (80 psi)Model Time (sec.)
RCI265(Anti-Clockwise)
≤ 1
RCI265(Clockwise)
≤ 1.3
SR Air Consumption (Free Air)
Model
RCI265 0.80 (U.S. Gallon)
Specifications
Torque Charts
Operation Times SR (80 psi)Model Time (sec.)
RCI265 ≤ 1.1
The times are related to full air flow and may increase depending on solenoid valves and the dimensions of connecting pipes.
Torque Output - Double Acting (DA) In-Lbs.
Model (DA) 0° = CLOSED90° = 0PEN 40 PSI 60 PSI 80 PSI 87 PSI 100 PSI
RCI265
0 5,257 7,886 10,514 11,470 13,142
50 2,474 3,710 4,947 5,390 6,184
90 3,735 5,602 7,469 8,151 9,336
Torque Output - Spring Return (SR) In-Lbs.
Model (SR) Function0° =
CLOSED90° = 0PEN
40 PSI 60 PSI 80 PSI 87 PSI 100 PSI
RCI265
0 2,938 4,298 5,734 6,188 7,149
Air 60 1,142 1,672 2,231 2,385 2,782
90 1,545 2,263 3,020 3,207 3,767
Spring
90 2,490 3,798 5,062 5,594 6,337
40 1,224 1,878 2,502 2,759 3,135
0 1,691 2,619 3,489 3,830 4,375