Upload
others
View
11
Download
0
Embed Size (px)
Citation preview
High performancecoatings
EuraBuild Performance
Accelerating performancein metal envelopes
High performancecoatings
Many architectural projects are constructed in harsh
environments. Metropolitan areas are often located
in coastal areas with high marine impact and urban
pollution. Also, building activity is high in geographical
areas with high UV intensity and sometimes even in
desert environments with extreme sand abrasiveness.
Ultimate performance
With a passion for color and in continuous pursuit of
technical performance we have developed our new
performance range for iconic projects located
in tough environments. A small number of widely
used colors in a coating set-up developed to
perfection. These finishes are not only high performing
on classic aspects like corrosion prevention and UV
stability, but a lot of attention is also put into reaching
ultimate results in solar- and light reflection.
EuraBuild PVDF 3L Protec+
The technical backbone of the Performance coating
range is the PVDF 3L set up. It offers high UV
protection, long warranty periods and potential use
across the globe.
Protec+ is our extra high build coating layer set up
for maximum durability.
Custom solutions
Custom coating optimization is possible for virtually
every environmental situation. Our EuramaxLab
architectural specification team is experienced in
finding solutions for very specific aspects, from the
vicinity of volcanoes to protection against bird feces.
Our most iconic example is probably the bright red
Ferrari Theme Park roof. A mind boggling combination
of an ultra bright red situated in a desert environment
at the coast of the Persian Gulf.
Tough environments
• Coastal / marine areas
• Urban metropolitan / air pollution
• High UV impact
• Humid / tropical
• High chemical load environments;
Industrial / volcano / airport
Specifications
• Aluminium thickness: 0.3 mm - 2.0 mm
• Standard coil width: up to 1.600 mm
• Maximum coil width: up to 2.600 mm
• Multiple aluminium alloys available
• Warranty indications are maximum warranty periods.
Final warranty is exclusively offered on individual
project basis.
• Install EuraBuild PVDF 3L panels in the same
direction to avoid color difference
• Order projects in one batch to avoid color difference
• Custom color and gloss (10 – 90 gloss units)
development possible
• Minimum Order Quantity: 500 m²
• Many other colors available on www.euramax.eu
Olympic Tennis Center I Hangzhou (CN)NBBJ Architects
EuraBuild PVDF 3L ProtecPure White ≈ RAL 9010
Standing Seam
High performance EuraBuild PVDF 3L is one
of the first product ranges in Europe awarded
with the ECCA premium certificate.
H i g h p e r f o r m a n c e
C o l o r p o r t f o l i o
EuraBuild PVDF 3L Protec+Pure White ≈ RAL 9010E-45-04-F-000456.30
EuraBuild PVDF 3L Protec+Light Grey ≈ RAL 7035E-45-04-F-004845.30
EuraBuild PVDF 3L Protec+Traffic White ≈ RAL 9016E-45-04-F-001531.30
EuraBuild PVDF 3L Protec+Silver Metallic ≈ RAL 9006E-45-04-F-004853.30
EuraBuild PVDF 3L Protec+Grey Aluminium ≈ RAL9007E-45-04-F-005137.30
EuraBuild PVDF 3L Protec+Gold Metallic ≈ 8640CE-45-04-F-002684.30
Coating Gloss
Units
Technical
Warranty
Period (yr)
100%
Rebate
Period (yr)
Aesthetic
Warranty
Period (yr)
Geogr.
Region
Application/ enviromental details
EuraBuild
PVDF 3L
FEVE
Protec+
10 - 90 25 ≥ 10 1, 2, 3 - Severe industrial- & metropolitan areas with pollution- Intense UV impact areas- Marine areas- Specific colors (e.g. RAL 3020 etc.) and gloss levels- Anti graffiti properties/ Very good dirt repellence- Protec+ extra high build coating layer set up
EuraBuild
PVDF 3L
Protec+
30 25 ≥ 10 1, 2, 3 - Severe industrial- & metropolitan areas with pollution- Intense UV impact areas- Marine areas- Specific colors (e.g. RAL 3020 etc.)- Good dirt repellence- Protec+ extra high build coating layer set up
Region 1
Region 2
Region 3
Region 2
Region 1
Definition of different climate zones:
Region 1. Regions at > 45° northern and southern latitudeRegion 2. Regions at > 30° northern and southern latitudeRegion 3. Regions at < 30° northern and southern latitude
EuramaxLab
The architectural specification team of Euramax is called
EuramaxLab. We support architects in specifying coated surfaces
and integrate our coating experience with the knowledge of our
partners fabricating cladding panels. EuramaxLab strives to provide
architects with a world of choice in metal envelope design.
EuramaxLab support services
• Custom coating development
• Custom color development
• Precision color matching
• Specification support
• Metal sampling
• Mock up service
• Network of panel manufacturers
Contact us for information or samples
+31(0)475 370 341 I [email protected]
www.euramax.eu
Ferrari World I Abu Dhabi (UAE)Benoy Architects
EuraBuild PVDF 4L FEVEFerrari Red / Ferrari Silver
Standing Seam Roof / Single Skin Facade
Tocumen Panama Airport T2 (PAN)Foster + Partners
AnoMax PVDF 3L FEVE ProtecEuras C33 - Middle Bronze
Standing seam
Queen Alia International Airport | Amman (JO)Foster + Partners
EuraBuild PVDF 3LTitanium Grey Metallic
Standing seam
King Abdulaziz International Airport I Jeddah (SAU)Atkins Global
EuraBuild PVDF 3L FEVEClassic CopperStanding seam
Nanjing Lukou International Airport (CN)ADPIEuraBuild PVDF 3LPearl White SoftStanding seam
Hong Kong-Zhuhai-Macao Bridge Inspection Center (CN)Arup ArchitectsEuraBuild PVDF 3L ProtecSilver Metallic ≈ RAL 9006Standing Seam
Baiyun International Airport I Guangzhou (CN)April Yang Design StudioEuraBuild PVDF 3LSilver Metallic ≈ RAL 9006Aluminium Composite Panels / Standing Seam
Tianjin Olympic Center Stadium (CN)AXS SatowEuraBuild PVDF 3LSilver Metallic ≈ RAL 9006Honeycomb Panel
Euramax Coated Products
Industrieweg 6 | 6045 JG | Roermond
PO Box 29 | 6040 AA | Roermond
The Netherlands
T +31 (0)475 370 303
www.euramax.eu
Disclaimer
The information contained herein (the “Information”) – including pictures, colours, descriptions, statements with regard to size, quality, availability and the like – is provided by Euramax Coated Products BV (“Euramax”) by way of non-binding information. Euramax makes no representations or warranties of any kind, express or implied, about the availability of products and/or the completeness, accuracy or reliability of the Information. Any reliance on the Information is at your own risk.
Colour samples are an indication of the (aesthetics of the) final product to be supplied. Due to the nature of the coating process measurable colour differences from the sample may occur. References to colour standards, such as RAL and Pantone, are an indication only and are solely used for ease of colour communication. No representations or warranties regarding the colour of the final products can be derived from a reference to a colour standard. The Information remains the property of Euramax.
All copyrights and/or other intellectual property rights in Information belong to Euramax. The contents of this Information are subject to amendment without notification.
This disclaimer is provided by Euramax Coated Products BV. We are registered in the Netherlands under company number 13013614. Please contact Euramax Coated Products BV for additional information or questions +31 475370303.