E U R O L I G H T W o r k t o p s

02

Model 100/2Postforming Model 300/3

EUROSPAN frame

EUROSPAN frame

EGGER ABS Edging8 mm EUROSPAN surface layer8 mm EUROSPAN surface layer Cardboard honeycomb

LEss Is MorE! tHE NEW MoDEL CoMBINAtIoN

For EUroLIGHt Worktops DoUBLEs YoUr

AppLICAtIoN possIBILItIEs.

STABILITY WITH A SIX SIDED CARDBOARD HONEYCOMB CORE – INSPIRED BY NATURE

Design trends are clearly moving towards expressing the value

of a piece of furniture through larger material thicknesses.

EUroLIGHt fulfils this requirement its lightweight, resource

saving construction and effortlessly links modern design

ideas with attractive decors and surfaces. In addition it offers

substantial cost savings with manufacturing, ergonomics

and transport.

With the extension of the existing EUroLIGHt range

with EUroLIGHt worktops, EGGEr underlines its promise

to be a complete supplier and offers decor and material

combinations for both furniture and worktops. the exceptional

decor match system extends itself from furniture to worktops.

With the robust 8 mm EUrospAN raw chipboard surface

layer, two longitudinal frames and a lightweight, highly robust

hexagonal cardboard honeycomb core, EUroLIGHt

worktops captivate in both form and function. An extensive

accessory program including connectors and edging

rounds off the range. From cutting through to installation,

fitting EUroLIGHt worktops is simple and straightforward.

set new accents in the kitchen with the 60 mm thick

EUroLIGHt worktops. the 15 selected worktop decors

will ensure your designs a modern, impressive appearance,

whilst the well established 3 mm radius will add a further

elegance. For the first time you will find a straight edge on

the rear side, sealed with 2 mm ABs edging, which gives

you more options with your planning and opens up new

application opportunities. Apart from the application as a

classical worktop you can also use the EUroLIGHt

worktops for shelves or end panels.

EUROLIGHT

03

ARCHITECT | ANNA kAMIŃSkA

MAxIMUM FrEEDoM oF DEsIGN! EUroLIGHt

Worktops IN DECor CoMBINAtIoN

WItH tHE EGGEr proDUCt rANGE CrEAtE NEW

possIBILItIEs For INtErIor DEsIGN.

“Materials must fit with the creativity and construction

of my designs. Resource saving, visually attractive,

lightweight materials are those which I require.”

EUROLIGHT

04

05

06

“My customers want trend conforming design. They

are environmentally aware and mobile. Lightweight

boards fulfil all these requirements. This helps

me tremendously in the presentation and in sales.”

jOINER | GUILLAUME CHANTIGNOLLE

LIGHtNEss IN kItCHEN CoNstrUCtIoN:

tHICk Worktops IN CoMBINAtIoN WItH

CHUNkY END pANELs ArE IN trEND.

tHE EUroLIGHt — ADvANtAGE: soLID IN

AppEArANCE YEt LIGHt IN WEIGHt.

EUROLIGHT

EGGER ABS Edgings

EUROLIGHT worktop Connector EUROLIGHT worktop Connector Type M

EUROLIGHT T-profi le EUROLIGHT sink installation adapter

EUROLIGHT Decor profi le

EGGER template

EGGER universal glue

EUROLIGHT WORKTOPS ACCESSORIES

NEW

Further in-depth product information is available to download at www.egger.com/zoom.

NEW

NEW:

64 × 2 mm

MOD 300/3 MOD 100/2

08

EUROLIGHT

With the innovative model combination between a 3 mm radius and a straight edge, multiple application

possibilities open themselves to you. Whether you use the postformed or the ABS edge, with EUROLIGHT worktops

you can set trendy accents. In addition you are supported by an extensive accessory program. The matching

decor and material combination is also guaranteed for all 15 stock decors: Laminates, ABS Edgings, EUROLIGHT

Decor profiles, splashbacks and identical skirtings offer colour combination of the highest level.

EUROLIGHT WORKTOPS STOCK RANGE All items are available

from stock

MODEL COMBINATIONS Sizes Thickness

MOD 300/3 & MOD 100/2 4.100 × 600 mm 60 mm

PRODUCT Sizes Thickness

EGGER Splashbacks 4.100 × 640 mm 15 mm

PRODUCT Sizes Height

EGGER worktop-wall profile* 4.100 × 25 mm 25 mm

PRODUCT Sizes Height

EGGER Splashback system 4.100 × 25 mm 25 mm

EUROLIGHT PRODUCT RANGE

EUROLIGHT ACCESSORIES

PRODUCT Sizes Thickness

EUROLIGHT Raw with two longitudinal frames

4.100 × 606 mm and 926 mm 38, 50 and

60 mm

PRODUCT Sizes Thickness

EGGER Laminates MED 2.800 × 1.300 mm 0,8 mm

EGGER Laminates FLEX 2.000 – 5.610 mm 0,6 mm

* colour matched accessories

09

EUROLIGHT

EUROLIGHT WORKTOPS STOCK PROGRAM

F275 ST9 DARK CONCRETE

F277 ST9 ARKOSA GREY

F236 ST15 TERRANO GREY

F270 ST82 MAGNA BLACK

F042 ST70 SONORA BLACK

F274 ST9 LIGHT CONCRETE

F276 ST9 ARKOSA SAND

F633 ST15 GREY BROWN METALLO

F371 ST82 GALIZIA GREY–BEIGE

F064 ST9 CLASSIC MARBLE

All available in size:

4,100 x 600 x 60 mm

NEW

NEW

NEW

10

EUROLIGHT

EUROLIGHT WORKTOPS STOCK PROGRAM

H207 ST9 NATURAL CORE BEECH

H3704 ST15 TOBACCO AIDA WALNUT

H178 ST15 AFZELIA BUTCHER–BLOCK

H199 ST70 WENGE BUTCHER–BLOCK

H3739 ST15 WALNUT BUTCHER–BLOCK

11

EUROLIGHT

JOINING EUROLIGHT WORKTOPS

01 SETTING UP THE TEMPLATEWith the help of the EGGER template as well as a standard,

commercially available hand router (with a 30 mm guide bush) and

a 70 mm router bit, worktop joints can be produced quickly and

efficiently. Please ensure that additional support is provided for that

overhanging template.

03 MALE CUTWorktop should be positioned reverse side up and the pin for the

front stop fixed in place. Align the template parallel to the end of

the worktop, with a space of 23 mm from the template to the edge

of the worktop, then secure in place using clamps.

02 FEMALE CUTFix the pin for the back stop. Align the template parallel to

the postformed edge with a space of 8 mm, then secure in place

using clamps.

04 CUT OUTS FOR THE EUROLIGHT WORkTOP CONNECTORS TYPE MThe EGGER template includes the cut outs for EUROLIGHT

Worktop Connectors Type M. After routering out the underside of

the worktop and clearing the excess honeycomb core, the cutter

depth should be set to 56 mm, so that it cuts a maximum of 4 mm into

the top chipboard surface. Router in a straight line along the front

edge of the cut out to provide the necessary space for the connector

to take hold. The access slots of the connector bolts should then

be cut into the longitudinal frame of the female cut.

12

EUROLIGHT

HOB AND SINK CUT OUTS

01 CUT OUTSDue to the honeycomb core, cut-outs are quick, simple and extend

the tooling life. Once the size of the cut out has been determined

and marked onto the worktop, cut the appropriate section using

either a manual saw or a jigsaw, with the worktop surface facing

downwards.

02 SEALINGThe cut outs should be sealed using the EUROLIGHT T-profile to

prevent against both heat and moisture ingress. For a durable fixing

we recommend using EGGER universal glue, which should be

applied on the top and bottom grooves of the EUROLIGHT T-profile.

03 HOB INSTALLATIONBefore installing the hob, aluminium tape should be applied over

the EUROLIGHT T-profile to prevent heat from affecting the

cut-out-area. Hobs can be installed in a number of ways, either

by screwing the fixing brackets directly into the profile or by

routering slots in the EUROLIGHT T-profile to attach the fittings.

13

EUROLIGHT

HOB AND SINK CUT OUTS

EDGING EUROLIGHT WORKTOPS

As most mounting brackets supplied with sinks are generally designed

for 38 mm worktops, EGGER have developed a sink installation

adapter to specifically work with 60 mm worktops. These adapters

can be used with most sink brands and are assembled by simply

inserting them into the existing mounting brackets.

04 SINk INSTALLATIONAs the EUROLIGHT T-profile is approximately 1 mm narrower

than the worktops, please ensure that all unprotected or exposed

areas are sealed using a silicone sealant. For added protection

against moisture we also recommend applying aluminium tape to

the EUROLIGHT T-profile joints in each of the corners.

01 APPLYING THE GLUEWe recommend finishing any exposed edges with 64 × 2 mm ABS

Edgings, which can be glued on site using EGGER universal glue or

contact glue. EGGER universal glue should be applied evenly to a

clean and dust-free worktop edge using a paint brush.

14

EUROLIGHT

03 APPLYING THE EUROLIGHT DECOR PROFILEThe EUROLIGHT Decor profile has been developed with the same

principle as EUROLIGHT T-profile, but is now colour matched to

the new range of 15 decors and available in a selection of matching

widths. Differences in the processing compared to EUROLIGHT

T-profile and ABS Edging is minimal. After cutting the worktop to size,

remove the grooves in the EUROLIGHT Decor profile to

accommodate the longitudinal frame in the worktop. Apply EGGER

universal glue using a paint brush to both the clean and dust free

worktop edge as well to both sides of the EUROLIGHT Decor

profile. Finally the EUROLIGHT Decor profile should be fixed in place

to set by using reinforced strength tape or a screw clamp.

04 FINISHING THE EDGEWe recommend using edge routing tools or special cutting blades for

removing the excess edging. An edge profile can then be created

with a draw blade to even out possible irregularities from routing and

buffing should take place in order to remove any dirt and add shine.

02 APPLYING THE EDGINGThe ABS Edging should be pressed on with a edge press or screw

clamp using a rigid underlay (e.g. Chipboard or MDF), ensuring

that there is sufficient overhang of edging on both the face and the

underside of the worktop

Further in-depth processing instructions are available to download at www.egger.com/zoom.

All decors shown are reproductions. Due to the variables in the printing process, colours may vary slightly from the actual product.

15

EUROLIGHT

2009–2011

ZOOM HOTLINE

Austria 050 600 10500 050 600 10304 zoom.at@egger.com

FRITZ EGGER GmbH & Co. OGHolzwerkstoffeWeiberndorf 206380 St. Johann in TirolAustria

EN_O

ST_8

9767

1_03

/10

Subj

ect t

o te

chni

cal m

odifi

catio

ns a

nd a

men

dmen

ts.

www.egger.com/zoom