EVOLINE POWER OUTLETS THE E-PLACE DESIGN ... › content › dam › lincoln...Shelf Stripping P. 2 Shelf Rail P. 4 Keyboard & Cable Outlets P. 5 EVOline Power Outlets P. 6 CD & DVD

EVOLINE POWER OUTLETS THE E-PLACE DESIGNEvoline power outlets are at the pinnacle of design and function. Manufactured in Germany by Schulte Electronics, the Evoline power outlets add a distinctive addition to any kitchen, office or area that requires a fast power source with both socket, data and USB charging facilities.

All Evoline power outlets are approved to Australian Standards.

LINCOLN SENTRY OFFICE, SHOP & WASHROOM HARDWARE

Office, Shop & Washroom Hardware

P.1

Offi

ce, S

hop

& W

ashr

oom

Har

dwar

eOf

fice,

Sho

p &

Was

hroo

m

Shelf Stripping P.2

Shelf Rail P.4

Keyboard & Cable Outlets P.5

EVOline Power Outlets P.6

CD & DVD Storage P.9

Cash Drawer Inserts P.10

Office & Shop

Furniture Support Legs P.11

Adjustable Cabinet Plinth Legs P.12

Legs

Castor Wheels P.13

Castors

Washroom Hardware P.18

Washroom Accessories P.28

Washroom Hardware

Sit n Stand Desks P.34

Linak Columns P.35 Linak Accessories P.49

Sit n Stand / Linak

OFFICE, SHOP & WASHROOM HARDWARE Dimension data and specifications may change without notification.


P.2

Shel

f Stri

ppin

gOf

fice,

Sho

p &

Was

hroo

m

Shelf StrippingOffice, Shop &

Washroom

Shelf StrippingDOUBLE SLOT STRIPPING

Features:

• Use 8 gauge countersunk screws to install - refer to section S - Fasteners, Blades & Accessories

SINGLE SLOT STRIPPING

Features:

• Use 8 gauge countersunk screws to install - refer to section S - Fasteners, Blades & Accessories

SHELF STRIPPING BRACKETS - 2 LUG

SHELF STRIPPING BRACKETS - 3 LUG

Finish Length CodeChromatic 1800mm 1-681-673White 1800mm 1-681-660White 2400mm 1-681-662

Finish Length CodeChromatic 1800mm 1-681-675Chromatic 2100mm 1-681-677Chromatic 2400mm 1-681-679White 600mm 1-681-663White 1000mm 1-681-663AWhite 1200mm 1-681-664White 1400mm 1-681-665White 1800mm 1-681-667White 2100mm 1-681-669White 2400mm 1-681-671

Finish Length CodeChromatic 150mm 1-681-695Chromatic 200mm 1-681-696Chromatic 250mm 1-681-697Chromatic 300mm 1-681-698White 150mm 1-681-681White 200mm 1-681-683White 250mm 1-681-685White 300mm 1-681-687

Finish Length CodeChromatic 350mm 1-681-699Chromatic 400mm 1-681-700Chromatic 450mm 1-681-701White 350mm 1-681-691White 400mm 1-681-692White 450mm 1-681-693White 500mm (4 lug) 1-681-694



P.3

Shel

f Stri

ppin

gOf

fice,

Sho

p &

Was

hroo

m


Washroom

Bracket AccessoriesSHELF STRIPPING END CLIPFeatures:

• Suits shelf stripping system• Add grommet below when using with glass shelves

SHELF STRIPPING CENTRE CLIP

Features:

• Suits shelf stripping system• Add grommet below when using with glass shelves

SHELF STRIPPING GROMMET

Features:

• Suits shelf stripping system for glass shelves

STAY BRACKET SHELF

Features:

• White powdercoated

FOLDABRAC FOLDING BRACKETFeatures:

• 70kg load rating (used in pairs)

Finish CodeClear Plastic 1-681-702



Dimensions Finish Code200mm x 200mm White 1-682-981250mm x 250mm White 1-682-982300mm x 300mm White 1-682-982A350mm x 350mm White 1-682-983400mm x 500mm White 1-682-984

Dimensions Finish Code300mm x 135mm White 1-681-655

Keyb

oard

& C

able

Oul

ets

Offic

e, S

hop

& W

ashr

oom

Keyboard & C

able Oulets

Office, Shop &

Washroom



P.4

Shel

f Stri

ppin

gOf

fice,

Sho

p &

Was

hroo

m


Washroom

Shelf Rail

EZI-SHELF TIMBER SHELF SUPPORT

Features:

• Suits 16mm thick timber board • Sold in length• Includes end caps (pair)• Load capacity 5Kg / 1000mm

EZI-SHELF SHELF END CAPS - TIMBER

Features:

• To suit Ezi-Shelf timber shelf support• Push in ends• Sold as pairs

STIFF ‘N’ SHELF SUPPORT RAIL

Features:

• Reduces sagging shelves • Suits 16mm thick timber board • Ideal for pantries and wardrobe systems • Sold in lengths

EZI-SHELF GLASS SHELF SUPPORT

Features:

• Sold in lengths • Fasten Ezi-Shelf directly into wall studs, especially for heavier load applications • Suits up to 8mm glass material• Includes end caps (pair)

EZI-SHELF END CAPS - GLASS

Features:

• To suit Ezi-Shelf glass shelf support (1-680-500) • Push in ends • Sold as pair

Finish Length CodeBlack 2.4m 1-680-500

Finish CodeBlack Plastic 1-680-550

Finish CodeWhite 1-681-550Black 1-681-555

Finish Length CodeWhite 3.6m 1-681-500Black 3.6m 1-681-510

Finish Length CodeWhite 4m 1-681-600



P.5

Keyb

oard

& C

able

Oul

ets

Offic

e, S

hop

& W

ashr

oom

Keyboard & C

able Oulets

Office, Shop &

Washroom

Shel

f Stri

ppin

gOf

fice,

Sho

p &

Was

hroo

m


Washroom

KEYBOARD DRAWER DELUXE

Features:

• Durable steel ball bearing slide mechanism • Drawer locks into position when in use • Mounts easily under desktop, shelf or table

LAZY SUSAN SWIVEL

Features:

• Load capacity - 75kg • Pre-assembled ready for installation in furniture components • Easy to install with exceptional load carrying capacity

FILE FRAME SUSPENSION

Features:

• Fits into drawer for hanging files

Finish Dimension CodeGrey Plastic 600mm W x 331mm D x 80mm H 1-658-603

Finish Dimension CodeZinc Plated 9.4mm x Ø 300mm 1-614-640

Finish Dimension CodeSteel Zinc Coated 393mm W x 340mm D x 237mm H 1-654-625

PLUG CABLE OUTLETS

Features:

• Available in 60mm or 80mm diameter

Diameter Material Finish Code60mm Plastic Beige 1-652-85460mm Plastic Black 1-652-854BL60mm Plastic Brown 1-652-85560mm Plastic Light Grey 1-652-855GR60mm Plastic White 1-652-856

Round - 35mm Aluminium Stainless Look 1-652-859Round – 60mm Aluminium Stainless Look 1-652-857Square – 60mm Aluminium Stainless Look 1-652-858

80mm Plastic Light Grey 1-652-856180mm Plastic Black 1-652-856280mm Plastic Beige 1-652-856380mm Plastic White 1-652-85641-652-857

KEYBOARD DRAWER UNDERDESK

Features:

• Durable steel ball bearing slide mechanism • Drawer locks into position when in use • Mounts easily under desktop, shelf or table

Finish Dimension CodeGrey Plastic 580mm W x 325mm D x 50mm H 1-658-601

• Slides under desk, out of sight, when not in use• Accepts all standard and extended keyboards

• Slides under desk, out of sight, when not in use• Accepts all standard and extended keyboards• Side extension for mouse

Keyboard & Cable Outlets



P.6

EVO

line

Pow

er D

ocks

Offic

e, S

hop

& W

ashr

oom

EVOline Pow

er Docks

Office, Shop &

Washroom

OFFICE, SHOP & WASHROOM HARDWARE Dimension data and specifications may change without notification.P.6

EVOline Power Docks

EVOLINE PORT PUSH

Features:

• 2 x Australian power sockets• 1 x USB Charger• W 142mm x D142mm x H280mm• Pops up at the touch of a finger• Suits benchtop thickness 10-50mm• Available in 3 finishes – stainless steel, black glass & white glass• 3 meter cable with Australian plug• IP rating: 20• Made in Germany• 2 year warranty

EVOLINE PORT WITH DATA SOCKETS

Features:

• 3 x power sockets • 1 x overload circuit breaker - 2400 watt• Silver rocker cover, plastic lacquered • Clear anodised aluminium profile • Australian Standard sockets • 3 metre cable with Australian Standard plug • 2 x RJ45 data sockets (Cat. 6) - Cables not provided • Worktops - max. 50mm thickness • Cutout diameter - 102mm, total diameter - 127mm (tornado hole saw 2-345-102) • Pullout height - 271mm, total height - 347mm • IP rating: 20• Made in Germany• 2 year warranty

EVOLINE PORT DELUXE

Features:

• 3 x power sockets• 1 x overload circuit breaker - 2400 watt• Brushed stainless steel rocker cover• Midnight blue LED lighting• On/Off switch for LED’s• Clear anodised aluminium profile• Australian Standard sockets• 3 metre cable with Australian Standard plug• Worktops – max. 50mm thickness• Cutout diameter - 102mm, total diameter - 127mm (tornado hole saw 2-345-102)• Pullout height - 286mm, total height - 362mm• IP rating: 20• Made in Germany• 2 year warranty

Finish CodeStainless Steel (brushed) 1-652-930Black Glass (gloss) 1-652-931White Glass (frosted) 1-652-932

Finish CodePlastic Silver Cover 1-652-906

Finish CodeStainless Steel Cover (Brushed) 1-652-908



P.7

EVO

line

Pow

er D

ocks

Offic

e, S

hop

& W

ashr

oom

EVOline Pow

er Docks

Office, Shop &

Washroom

P.7LINCOLN SENTRY OFFICE, SHOP & WASHROOM HARDWARE

EVOLINE USB PORT

Features:

• 2 x power sockets • 2 x USB charger point - perfect for charging phones, tablets, mp3 and other electronic devices• Silver rocker cover, plastic lacquered • Clear anodised aluminium profile • Australian Standard sockets • 3 metre cable with Australian Standard plug • Worktops – max. 50mm thickness • Cutout diameter - 102mm, total diameter - 127mm (tornado hole saw 2-345-102) • Mounting diameter clearance - 140mm • Pullout height - 236mm, total height 312mm• IP rating: 20• Made in Germany• 2 year warranty

EVOLINE PORT

Features:

• 3 x power sockets • 1 x overload circuit breaker - 2400 watt • Silver rocker cover, plastic lacquered • Clear anodised aluminium profile • Australian Standard sockets • 3 metre cable with Australian Standard plug • Worktops – max. 50mm thickness • Cutout diameter - 102mm, total diameter - 127mm (tornado hole saw 2-345-102) • Mounting diameter clearance - 140mm • Pullout height - 236mm, total height 312mm• IP rating: 20• Made in Germany• 2 year warranty

EVOLINE FLIPTOP

Features:

• Configuration - 2 x sockets, 1 x USB charger, Data socket, 1 x VGA, 1 x Audio & 1 x HDMI• W 310mm x D167mm x H68mm• Available in 304 stainless steel finish• Everything you need for a boardroom connectivity• Suits benchtop thickness 10-50mm• 3 meter power cable with Australian plug• 3 meter VGA, Audio & HDMI cables supplied• IP rating: 20• Made in Germany• 2 year warranty



Cover Finish CodeStainless Steel (brushed) 1-652-925

EVOline Power Docks

CD

& D

VD S

tora

geOf

fice,

Sho

p &

Was

hroo

m

CD

& D

VD Storage

Office, Shop &

Washroom



P.8

EVO

line

Pow

er D

ocks

Offic

e, S

hop

& W

ashr

oom

EVOline Pow

er Docks

Office, Shop &

Washroom

EVOLINE REPLACEMENT PARTS

Description Finish CodeEVOline Rocker Cover Silver Plastic 1-652-912EVOline Rocker Cover Stainless Steel 1-652-913EVOline Replacement Collar Silver Plastic 1-652-914Tornado Hole Saw Ø102mm 5 x teeth - with arbor 2-345-102

1-652-912

1-652-913

EVOLINE BACKFLIP

The EVOline BackFlip sits nearly flush on the work surface - when closed - the giving enhanced protection against liquid spillages. At a touch of a finger, it turns 180 degrees to reveal two power sockets and a USB charger.

Features:

• 2 x Australian power sockets• 1 x USB Charger• W 225.2mm x D104.8mm x H53mm• Rotating insert reacts at the touch of a finger• Suits benchtop thickness 10-40mm• Available in 5 finishes• 3 meter cable with Australian plug• IP rating: 20• Made in Germany• 2 year warranty

Finish CodeStainless Steel 1-652-920Matt Black 1-652-921Matt White 1-625-922Glass Black (gloss) 1-652-923Glass White (frosted) 1-652-924

EVOline Power Docks



P.9

CD

& D

VD S

tora

geOf

fice,

Sho

p &

Was

hroo

m

CD

& D

VD Storage

Office, Shop &

Washroom

EVO

line

Pow

er D

ocks

Offic

e, S

hop

& W

ashr

oom

EVOline Pow

er Docks

Office, Shop &

Washroom

CD HOLDER - SUITS DRAWER

Features:

• Holds 20 compact discs • Stick on to inside of drawer • Sold in pairs

ECHELON CD/DVD STORAGE MODULES

Features:

• Ideal for entertainment cabinet drawers• Fits both standard and slim CD cases as well as DVD cases• Modules connect with tongue and groove and can be cut to suit drawer width• Aluminium profile - 1020mm length• Suitable for TANDEM for Wood and MOVENTO drawer systems• M4 T-Slots available at bottom for securing to drawer base

CD/DVD RACK - POP OUT

Features:

• Holds 20 compact discs or 15 DVDs • Screw-on to shelf or cabinet • Sold in pairs

Dimension Finish Code1020mm L x 145.5mm W x 19mm H Natural Anodised Aluminium 1-618-657

Dimension Finish Code320mm x 160mm CD Black 1-618-652320mm x 160mm DVD Black 1-618-648

Dimension Finish Code304mm x 34mm Black 1-618-655

CD & DVD Storage

Furn

iture

Sup

port

Legs

Offic

e, S

hop

& W

ashr

oom

Furniture Support LegsOffice, Shop &

Washroom


Drawer System

sHinge System

s


P.10

Cas

h D

raw

er In

serts

Offic

e, S

hop

& W

ashr

oom

Cash D

rawer Inserts

Office, Shop &

Washroom

Cash Drawer Inserts

COUNTACASH CASH DRAWER INSERT

Features:

• Ideal for high cash flow areas • Stand up note compartments and coin counters increase cash handling efficiency• Free standing with generous hanging lips • Made of special high impact styrene in charcoal black

Dimensions Configuration Code370mm W x 320mm D x 60mm H 5 Notes / 6 Coins 1-650-090




STANDARD CASH DRAWER INSERT

Features:

• Made of special high impact styrene in charcoal black • Efficient and low cost • Free standing with generous hanging lips • Auto hold up note clips standard • Includes $1 coin dispenser and wrapper

DELUXE CASH DRAWER INSERT

Features:

• Made of special high impact styrene in charcoal black • Efficient and low cost • Free standing with generous hanging lips • Auto hold up note clips standard • Includes $1 coin dispenser and wrapper

SPECIALTY CASH DRAWER INSERT

Features:

• Made of special high impact styrene in charcoal black • Efficient and low cost • Free standing with generous hanging lips • Auto hold up note clips standard • Includes generous utility section for bankcard slips



P.11

Furn

iture

Sup

port

Legs

Offic

e, S

hop

& W

ashr

oom

Furniture Support LegsOffice, Shop &

Washroom

Cas

h D

raw

er In

serts

Offic

e, S

hop

& W

ashr

oom

Cash D

rawer Inserts

Office, Shop &

Washroom

Furniture Support Legs

TABLE LEGS - CYLINDER

Features:

• Height min (max): 870mm/(900mm) • Sold per each

TABLE LEGS - CYLINDER

Features:

• Height min (max): 710mm/(740mm) • 1-616-110 and 1-616-113 sold as set of 4 • 1-616-140 and 1-616-141 sold individually

FOLDING TABLE LEGS

Features:

• Load capacity - 300kg • Sold in pairs• Powdercoated black

STAINLESS STEEL LEG - CYLINDER WITH ADJUSTABLE FOOT

Features:

• Kit = 1 x leg & 1 x base, sold per each• 30mm adjustment

Finish Ø Size CodeChrome 80mm 1-616-142Black 80mm 1-616-143

Finish Ø Size CodeChrome 60mm 1-616-110Black 60mm 1-616-113Chrome 80mm 1-616-140Black 80mm 1-616-141

Height Width Finish Code720mm 610mm Black 1-616-220

Finish Type Load CodeStainless Steel 100mm Leg Kit 150kg 1-616-196Stainless Steel 150mm Leg Kit 200kg 1-616-190Stainless Steel 200mm Leg Kit 200kg 1-616-197Stainless Steel 250mm Leg Kit 200kg 1-616-198Stainless Steel 100mm Leg 1-616-191Stainless Steel 150mm Leg 1-616-192Stainless Steel 200mm Leg 1-616-193Stainless Steel 250mm Leg 1-616-194Steel Zinc Plated Base Plate 1-616-195

50mm

Height



P.12

Cas

tor W

heel

sOf

fice,

Sho

p &

Was

hroo

m

Castor W

heelsOffice, Shop &

Washroom

Adjustable Cabinet Plinth Legs

Description Finish CodeENKO Plinth Leg Kit - Knock-in Black Plastic 1-419-350ENKO Plinth Leg Kit - Screw-on Black Plastic 1-419-352

Description Finish CodeTSI Plinth Leg Kit - Knock-in Black Plastic 1-419-504TSI Plinth Leg Kit - Screw-on Black Plastic 1-419-505

Description Finish CodeMULTI-STAR Plinth Leg Kit - Screw-on Black Plastic 1-419-300MULTI-STAR Plinth Leg Kit - Knock-in Black Plastic 1-419-310

Plinth Leg Accessories Finish CodeENKO Base Only - Knock-in Black Plastic 1-419-354ENKO Base Only - Screw-on Black Plastic 1-419-356ENKO Plinth Leg Only Black Plastic 1-419-358ENKO Plinth Clip Screw-on Black Plastic 1-419-360

Plinth Leg Accessories Finish CodeTSI Base Only - Knock-in Black Plastic 1-419-501TSI Base Only - Screw-on Black Plastic 1-419-502TSI Plinth Leg Only Black Plastic 1-419-500TSI Plinth Clip Screw-In Black Plastic 1-419-503

Plinth Leg Accessories Finish CodePlinth Bracket Screw-on White Plastic 1-419-260

TSI CABINET ADJUSTABLE LEG

Features:

• Available with either Screw-on or Knock-in bases • Adjustable height 90mm to 170mm• Hole center = 64mm• Verticle load rating = 200kg

ENKO CABINET ADJUSTABLE LEG

Features:

• Available with either Screw-on or Knock-in bases • Preset at 150mm • Adjustable height 97mm to 187mm • Vertical load rating = 200kg • Hole center = 64mm

MULTI-STAR ADJUSTABLE CABINET LEG

Features:

• Fastening of face is ensured by locking element and side clamps • Save time in installation by pre-installing legs in workshop • Leg is locked in adaptor horizontally during transportation• Adjustable height 90mm to 185mm• Hole center = 64mm

Rotate Clockwise / Anticlockwise

Screw-on

Screw-on kit

Screw-on kit

Knock-in

Knock-in kit

Knock-in kit

Adjustable Legs



P.13

Cas

tor W

heel

sOf

fice,

Sho

p &

Was

hroo

m

Castor W

heelsOffice, Shop &

Washroom

Castor Wheels

SQUARE PLATE SWIVEL CASTOR

Features:

• Includes square mounting plate (size:38mm x 38mm x 2mm)

SQUARE PLATE SWIVEL CASTOR - WITH BRAKE

Features:

• With brake option • Includes square mounting plate (size 38mm x 38mm x 2mm)

STEM (KNOCK-IN) SWIVEL CASTOR - UNHOODED

Features:

• Load capacity - 40kg

Finish Wheel Ø Total Height Load Rating CodeBlack 40mm 55mm 25kg 1-620-000Black 50mm 65mm 40kg 1-620-010

Finish Wheel Ø Total Height Load Rating CodeBlack 50mm 65mm 40kg 1-620-012

Finish Wheel Ø Stem x Height Socket CodeBlack 50mm 8mm x 38mm 8mm 1-620-120

SQUARE PLATE SWIVEL CASTOR - 40KG

Features:

• Width of tyre 19mm• Total height 66mm• Bolt hole 7mm, bolt hole centers 38 x 27mm

SQUARE PLATE FIXED CASTOR - 40KG

Features:

• Width of tyre 19mm • Total height 66mm • Bolt hole 7mm, bolt hole centers 38 x 27mm

Wheel Ø Load Tyre Plate Code50mm 40kg Grey Rubber 51 x 41mm 1-620-747




P.14

Cas

tor W

heel

sOf

fice,

Sho

p &

Was

hroo

m

Castor W

heelsOffice, Shop &

Washroom

Castor Wheels

SQUARE PLATE SWIVEL CASTOR - 40KG WITH BRAKE

Features:



Features:



Features:



Features:


PLATE BOLT HOLE SWIVEL CASTOR - 55KG WITH BRAKE

Features:

• Width of tyre 25mm • Total height 98mm • Bolt hole 11mm


Features:






Wheel Ø Load Tyre Code75mm 55kg Grey Rubber 1-620-742




P.15

Cas

tor W

heel

sOf

fice,

Sho

p &

Was

hroo

m

Castor W

heelsOffice, Shop &

Washroom

Castor Wheels


Features:



Features:

• Width of tyre 32mm• Total height 108mm • Bolt hole 9mm, bolt hole centers 80 x 60mm


Features:



Features:




Wheel Ø Load Tyre Plate Code80mm 80kg Nylon 100 x 80mm 1-620-746


SQUARE PLATE SWIVEL CASTOR - 80KG WITH BRAKE Features: • Width of tyre 32mm • Total height 108mm • Bolt hole 9mm, bolt hole centers 80 x 60mm




P.16

Cas

tor W

heel

sOf

fice,

Sho

p &

Was

hroo

m

Castor W

heelsOffice, Shop &

Washroom

Castor Wheels


Features:

• Non marking elastic rubber tyres absorb shock loads while reducing friction and operating noise• High strength blue rubber which has no memory • Double headset bearings with sealing rings • Cast metal total lock brake • Total height 133mm • Bolt holes - 60 x 75-78mm

SQUARE PLATE TWIN WHEEL SWIVEL CASTOR - 70KG

Features:

• Twin wheel design for stability and manoeuvrability over carpet• High load capacity, low overall height • Double headset bearings • Total height - 72mm • Bolt holes - 47mm x 47mm

SQUARE PLATE TWIN WHEEL SWIVEL CASTOR - 70KG WITH BRAKE

Features:

• Twin wheel design for stability and manoeuvrability over carpet • High load capacity, low overall height • Double headset bearings • Total height - 72mm • Bolt holes - 47mm x 47mm

Wheel Ø Load Tyre Plate Code100mm 140kg Blue Rubber 78 x 98mm 1-620-786

Wheel Ø Load Tyre Plate Code100mm 140kg Blue Rubber 78 x 98mm 1-620-784




Features:

• Non marking elastic rubber tyres absorb shock loads while reducing friction and operating noise • High strength blue rubber which has no memory • Double headset bearings with sealing rings • Total height 133mm • Bolt holes - 60 x 75-78mm



P.17

Cas

tor W

heel

sOf

fice,

Sho

p &

Was

hroo

m

Castor W

heelsOffice, Shop &

Washroom

Castor Wheels


Features:

• Swivel castor, all nylon, without wheel brake, silver hub caps, grey wheels, 32mm drilling system • Total height - 73mm


Features:

• Swivel castor, all nylon, with wheel brake, silver hub caps, grey wheels, 32mm drilling system • Total height - 73mm


Features:



Features:



Features:



Features:










P.18

Was

hroo

m H

ardw

are

Offic

e, S

hop

& W

ashr

oom

Washroom

Hardw

areOffice, Shop &

Washroom

STAINLESS STEEL GRAVITY HINGE OPEN ASSIST - CONCEALED SCREW FIX

Features:

• 304 Stainless steel, nylon inserts• Stain finish• Lift Off Hinge• Includes fixing screws• Load Rating per hinge: 15kg• Sold as an each

Type Sold CodeRight Hand Hinge 1 = 1 Hinge 2-700-001Left Hand Hinge 1 = 1 Hinge 2-700-006


Description Sold CodeCoat Hook - Concealed 1 = 1 Hook 2-700-021

Description Sold CodeBumper - Concealed Screw 1 = 1 Bumper 2-700-031

DIECAST ZINC GRAVITY HINGE OPEN ASSIST - CONCEALED SCREW FIX

Features:

• Diecast zinc, stainless steel shaft, nylon inserts • Satin chrome-plated finish & ABS snap on covers• Lift off hinge• Includes fixing screws• Load ratings per hinge: 15kg• Sold as an each

BUMPER - CONCEALED SCREW FIX

Features:

• Diecast zinc material & rubber insert• Satin chrome finish & ABS snap on cover

COAT HOOK - CONCEALED SCREW FIX

Features:

• Diecast zinc & rubber bumper• Satin chrome finish & ABS snap on covers

Concealed Screw Fix



P.19

Was

hroo

m H

ardw

are

Offic

e, S

hop

& W

ashr

oom

Washroom

Hardw

areOffice, Shop &

Washroom

Concealed Screw Fix

A B Cor D

D

D

E

Gravity Hinge, Diecast Zinc

Gravity Hinge, Stainless Steel Coat Hook Slide Lock

Indicator

Staple

Bumper

Description Sold CodeStandard Latch Set – Concealed Screw 1 = 1 Set 2-700-026

Standard Access Partition Kit Concealed Screw Fix – Diecast Hinge Type Code

A C D ERight Hand 2-700-036Left Hand 2-700-037

Standard Access Partition Kit Concealed Screw Fix – Diecast Hinge Type Code

B C D ERight Hand 2-700-046Left Hand 2-700-047

STANDARD LATCH SET - CONCEALED SCREW FIX

Features:

• Includes slide lock, indicator and staple (diecast zinc)• Satin chrome finish & ABS snap on covers• Concealed screw fixings• Suits 13mm, 18mm and 25mm boards

COMPLETE STANDARD PARTITION KIT - CONCEALED SCREW FIX

Features:

• Complete washroom partition set includes 2 x Gravity Hinge – concealed screw fix, Coat Hook, Turnbolt, Indicator, Staple and Bumper.• Handing is determined from the inside. A left hand kit has the hinge on the left hand side; A right hand kit has the hinge on the right hand side (while standing

inside the cubicle)



P.20

Was

hroo

m H

ardw

are

Offic

e, S

hop

& W

ashr

oom

Washroom

Hardw

areOffice, Shop &

Washroom

Concealed Screw Fix

Type Sold CodeBumper – Bolt Through 1 = 1 Bumper 2-700-031

BUMPER - CONCEALED SCREW FIX

Features:

• Diecast zinc material & rubber insert• Satin chrome finish & ABS snap on cover

STAINLESS STEEL GRAVITY HINGE OPEN ASSIST - CONCEALED SCREW FIX

Features:

• 304 Stainless steel, nylon inserts• Stain finish• Lift off hinge• Includes fixing screws• Load rating per hinge: 15kg• Sold as an each




DIECAST ZINC GRAVITY HINGE OPEN ASSIST - CONCEALED SCREW FIX

Features:

• Diecast zinc, stainless steel shaft, nylon inserts • Satin chrome-plated finish & ABS snap on covers• Lift off hinge• Includes fixing screws• Load ratings per hinge: 15kg• Sold as an each

COAT HOOK - CONCEALED SCREW FIX

Features:




P.21

Was

hroo

m H

ardw

are

Offic

e, S

hop

& W

ashr

oom

Washroom

Hardw

areOffice, Shop &

Washroom

DISABLED ACCESS LATCH SET – CONCEALED SCREW FIX

Features:

• Includes turnbolt (brass), indicator (diecast zinc) and staple (brass)• Satin chrome finish• Concealed screw fixings (turnbolt and indicator)• Bolt through fixing (staple)• Suits 13mm, 18mm & 25mm boards

Description Sold CodeDisable Access Latch Set – Concealed Screw 1 = 1 Set 2-700-029

Disabled Partition Kit Concealed Screw Fix – Diecast Hinge Type Code


Disabled Partition Kit Concealed Screw Fix – Stainless Steel Hinge Type Code

B C D ERight Hand 2-700-048Left Hand 2-700-049

COMPLETE DISABLED ACCESS PARTITION KIT – CONCEALED SCREW FIX

Concealed Screw Fix - Disabled Access

Features:

• Complete washroom partition set includes 2 x Gravity Hinge – bolt through fix, Coat Hook, Turnbolt, Indicator, Staple and Bumper.• Handing is determined from the inside. A left hand kit has the hinge on the left hand side; A right hand kit has the hinge on the right hand side (while standing inside

the cubicle)

A B Cor D

D

D

E


Gravity Hinge, Stainless Steel

Coat Hook Slide Lock

Indicator

Staple

Bumper



P.22

Was

hroo

m H

ardw

are

Offic

e, S

hop

& W

ashr

oom

Washroom

Hardw

areOffice, Shop &

Washroom

Bolt Through Fix


Type Sold CodeBumper – Bolt Through 1 = 1 Bumper 2-700-075

BUMPER - BOLT THROUGHFeatures:

• Diecast zinc material & rubber insert• Satin chrome finish


COAT HOOK - CONCEALED SCREW FIXFeatures:


DIECAST ZINC GRAVITY HINGE OPEN ASSIST – BOLT THROUGH

Features:

• Diecast zinc, stainless steel shaft, nylon inserts • Satin chrome-plated finish• Open assist and lift off hinge• Load ratings per hinge: 15kg• Sold as an each• Supplied with bolts and nuts

STAINLESS STEEL SPRING HINGE OPEN ASSIST – BOLT THROUGHFeatures:

• 304 Stainless steel, nylon inserts• Stain finish• Use for both right hand and hand applications• Open assist• Load rating per hinge: 15kg• Sold as an each• Supplied with bolts and nuts

Type Sold CodeSpring Hinge 1 = 1 Hinge 2-700-070

35



P.23

Was

hroo

m H

ardw

are

Offic

e, S

hop

& W

ashr

oom

Washroom

Hardw

areOffice, Shop &

Washroom

Bolt Through Fix

A B C D

D

D

E

or


Spring Hinge, Stainless Steel

Coat Hook Turnbolt

Indicator

Staple

Bumper

COMPLETE STANDARD PARTITION KIT – BOLT THROUGH

Features:

• Complete washroom partition set includes 2 x Gravity Hinge – bolt through fix, Coat Hook, Turnbolt, Indicator, Staple and Bumper.• Handing is determined from the inside. A left hand kit has the hinge on the left hand side; A right hand kit has the hinge on the right hand side (while standing inside

the cubicle)

Standard Partition Kit Bolt Through Type Code


Standard Partition Kit Bolt Through Type Code

B C D E Right Hand 2-700-090

Description Sold CodeStandard Latch Set - Bolt Through 1 = 1 Set 2-700-027

STANDARD LATCH SET - BOLT THROUGHFeatures:

• Includes turnbolt (brass), indicator (diecast zinc) and staple (brass)• Satin chrome finish• Concealed screw fixings (turnbolt and indicator)• Bolt through fixing (staple)• Suits 13mm, 18mm & 25mm boards

Standard Partition Kit Bolt Through



P.24

Was

hroo

m H

ardw

are

Offic

e, S

hop

& W

ashr

oom

Washroom

Hardw

areOffice, Shop &

Washroom

DIECAST ZINC GRAVITY HINGE HOLD OPEN - SCREW FIXFeatures:

• Diecast zinc, stainless steel shaft, nylon inserts• Hold open and lift off hinge• Includes fixing screws• Load ratings per hinge: 15kg• Sold as an each


COAT HOOK - CONCEALED SCREW FIXFeatures:

• Diecast zinc & rubber bumper • Satin chrome finish & ABS snap on covers


BUMPER - SCREW FIXFeatures:

• Diecast zinc material & rubber insert • Satin chrome finish

Description Sold CodeBumper - Concealed Screw 1 = 1 Bumper 2-700-030

PROJECT LATCH SET - SCREW FIXFeatures:

• Includes turnbolt (brass), indicator and staple (diecast zinc)• Satin chrome finish

Description Sold CodeStandard Latch Set - Concealed Screw 1 = 1 Set 2-700-025

Screw Fix



P.25

Was

hroo

m H

ardw

are

Offic

e, S

hop

& W

ashr

oom

Washroom

Hardw

areOffice, Shop &

Washroom

Partition Legs

REBATED SHAFT FOOT (110 SERIES)Features:

• Stainless steel• Off floor system• 50mm adjustment

SINGLE FIX FOOT (112 SERIES)Features:


DOUBLE FIX FOOT (111 SERIES)Features:


DOUBLE FIX FOOT (122 SERIES)Features:

• Stainless steel• To suit 18mm dividers only• Off floor system• 50mm adjustment

Metlam Australia Pty Ltd Tel: 61 3 5428 4618 Fax: 61 3 5428 1780 Email: [email protected] www.metlam.com.au

Section 4 - 18The photographs and line drawings of the products in this catalogue are representational only.Metlam Australia Pty Ltd reserves the right to, and from time to time, make changes and improvements in design and dimensions.

Rebated Shaft Foot AssemblyCode

MaterialFinishFeatures

Specify

110 Series

Stainless SteelSatin Stainless SteelOff Floor System50mm Adjustment110 - 150: 125mm min - 175mm max height110 - 200: 175mm min - 225mm max height110 - 250: 225mm min - 275mm max height110 - 300: 275mm min - 325mm max height

Foot Assemblies

Double Fix Foot AssemblyCode


Specify

111 Series


Code


Specify

112 Series


Single Fix Foot Assembly

Code


Specify

122 Series


T Piece Foot Assembly

150

18

52

70

25

52

70

16

20

95 20

52

70

7

52

70

104 49





Specify

110 Series


Foot Assemblies



Specify

111 Series


Code


Specify

112 Series



Code


Specify

122 Series



150

18

52

70

25

52

70

16

20

95 20

52

70

7

52

70

104 49





Specify

110 Series


Foot Assemblies



Specify

111 Series


Code


Specify

112 Series



Code


Specify

122 Series



150

18

52

70

25

52

70

16

20

95 20

52

70

7

52

70

104 49





Specify

110 Series


Foot Assemblies



Specify

111 Series


Code


Specify

112 Series



Code


Specify

122 Series



150

18

52

70

25

52

70

16

20

95 20

52

70

7

52

70

104 49

HEAVY DUTY ADJUSTABLE LEGSFeatures:

• Aluminium & nylon base• Natural anodised finish• Suits 13mm & 18mm board

Type Min Height Max Height Code150mm 135mm 165mm 2-700-360165mm 165mm 205mm 2-700-361200mm 185mm 225mm 2-700-362

Height Adjustments CodeMin 125mm to Max 175mm 2-700-170Min 175mm to Max 225mm 2-700-180Min 225mm to Max 275mm 2-700-190Min 275mm to Max 325mm 2-700-200




Cha

nnel

, Han

dles

& H

ooks

Offic

e, S

hop

& W

ashr

oom

Channel, H

andles & H

ooksOffice, Shop &

Washroom



P.26

Stap

les

& B

umpe

rsOf

fice,

Sho

p &

Was

hroo

m

Staples & B

umpers

Office, Shop &

Washroom

LIFT OFF STAPLE - LEFT HANDEDFeatures:

• For use with right hand gravity hinge 2-700-000 or 2-700-060• Brass material• Satin chrome-plated finish• Bolt through fixing

Type CodeLift Off Staple - Left Handed 2-700-140

EDGE MOUNTED BUMPERFeatures:

• 304 Stainless Steel & rubber insert• Screw fix mounting

ADDITIONAL FACE PLATEFeatures:

• 304 Stainless Steel• 1mm thick for bolt through• Hinge mounting• Sold as set of 4

Staples & Bumpers

LIFT OFF STAPLE - RIGHT HANDEDFeatures:

• For use with right hand gravity hinge 2-700-005 or 2-700-065• Brass material• Satin chrome-plated finish• Bolt through fixing

Type CodeLift Off Staple - Right Handed 2-700-150

Type CodeEdge Mounted Bumper 2-700-120

Type CodeAdditional Face Plate 2-700-160



P.27

Cha

nnel

, Han

dles

& H

ooks

Offic

e, S

hop

& W

ashr

oom

Channel, H

andles & H

ooksOffice, Shop &

Washroom

Stap

les

& B

umpe

rsOf

fice,

Sho

p &

Was

hroo

m

Staples & B

umpers

Office, Shop &

Washroom

Channel, Handles & Hooks

L

H

Hole Centre = 96mm

Ø Length & Height Code8mm 105mm x 30mm 1-545-52210mm 105mm x 30mm 1-545-526

Code1-490-272

Code1-490-270

HAT AND COAT HOOKFeatures:

• Chrome plated• 75mm projection

HANDLESFeatures:

• Satin chrome finish• 96mm hole centre• Required for all ambulant and disabled cubicles

Typical Head Assembly Typical Wall/Partition Assembly

Suit Board Length X Measurement Y Measurement Code

13mm board 2700mm 12mm 20mm 2-700-16618mm board 2700mm 17mm 25mm 2-700-169

PARTITION INSERT CHANNEL

Suit Board Length X Measurement Y Measurement Code13mm board 1800mm 15mm 20mm 2-700-16713mm board 3600mm 15mm 20mm 2-700-16818mm board 1800mm 20mm 25mm 2-700-16518mm board 3600mm 20mm 25mm 2-700-163

PARTITION TOP WALL CHANNEL

COAT RACK - 5 HOOKSFeatures:

• Chrome finish• Screws included


Drawer System

sHinge System

s


P.28

Was

hroo

m A

cces

sorie

sOf

fice,

Sho

p &

Was

hroo

m

Washroom

AccessoriesOffice, Shop &

Washroom

Other Partition Fittings

Code2-700-350

TOILET ROLL HOLDER – BASIC

Features:

• 304 Stainless Steel• Holds 1 roll of paper

Code2-710-000

TOILET ROLL HOLDER – SINGLE ROLL

Features:

• 304 Stainless Steel• Holds 1 roll of paper

Code2-710-001

TOILET ROLL HOLDER – TWIN ROLL

Features:

• 304 Stainless Steel• Holds 2 rolls of paper

Code2-710-002

SOAP DISPENSER VERTICAL – STAINLESS STEEL

Features:

• 304 Stainless Steel• Black ABS pump button• Concealed fixings• 1.2 litre capacity• Lockable hinged lid (key provided)



P.29

Was

hroo

m A

cces

sorie

sOf

fice,

Sho

p &

Was

hroo

m

Washroom


Washroom

Other Partition Fittings

Code2-710-003

PAPER DISPENSER INTERFOLD - STAINLESS STEEL

Features:

• 304 Stainless Steel• Concealed fixings• 450 C –Fold or 600 multi-fold paper towel capacity

Code2-710-004

ELECTRIC HAND DRYER - STAINLESS STEEL

Features:

• 304 Stainless Steel• High-flow dual air outlets• Motor: 250-500W Brush Type: Dual Ball Bearings,

16,000-29,000 RPM• 95°C auto reset overload• 220-240V, 50Hz, 1000W• DP Rating: IP 24• Warranty: Labour – 3 years and Parts – 5 years

Code2-710-005

WASHROOM SHELF - STAINLESS STEEL

Features:

• 304 Stainless Steel• W457mm x H105mm x D128mm• 4 mounting holes – fixings not included

Code2-710-006

WASHROOM MIRROR - STAINLESS STEEL FRAME

Features:

• Frame: 304 Stainless Steel• Mirror: 6mm Glass (Vinyl backed)• Unit secured with Stainless Steel wall brackets• W450mm x H1000mm x D25mm• Fully complies with AS1428.1


Drawer System

sHinge System

s


P.30

Was

hroo

m A

cces

sorie

sOf

fice,

Sho

p &

Was

hroo

m

Washroom


Washroom

Disability and Ambulant Toilet Hardware

376.40

155.5

0560

376.40

155.5

0

Code2-710-054

90° FLUSH AMBULANT GRAB RAIL

Features:

• 304 Stainless Steel• Rail: Ø32mm• Concealed fixings: Ø78mm• Suits right hand or left hand installation• Fully compliant with AS1428.1

90° FLUSH MOUNT SIDE WALL & CISTERN GRAB RAIL SET

Features:

• Right hand set shown• 304 Stainless Steel • Rail: Ø32mm• Concealed fixings: Ø78mm• Includes 300mm rail• Fully compliant with AS1428.1

Code2-710-007

STRAIGHT RAIL PADDED BACKREST

Features:

• 304 Stainless Steel frame and mounts• White padded PVC backrest• Concealed fixings• 20mm adjustable height on backrest• Fully compliant with AS1428.1

Type CodeRight Hand Set 2-710-008Left Hand Set 2-710-009



P.31

Was

hroo

m A

cces

sorie

sOf

fice,

Sho

p &

Was

hroo

m

Washroom


Washroom

Shower Hardware

1600mm1600mm

1000

mm

Code2-710-013

RH OFFSET FLUSH MOUNT SHOWER GRAB RAIL

Features:

• 304 Stainless Steel • Rail: Ø32mm• Concealed fixings: Ø78mm• Fully compliant with AS1428.1

Code2-710-014

LH OFFSET FLUSH MOUNT SHOWER GRAB RAIL

Features:

• 304 Stainless Steel • Rail: Ø32mm• Concealed fixings: Ø78mm• Fully compliant with AS1428.1

SHOWER/BED CURTAIN TRACK SYSTEM

Features:

• Anodised Aluminium• Concealed fixings• Components supplied: Track, Ceiling Suspension

Rod, Hooks & Wall Mount Bracket• Full compliant with AS1428.1• 2-710-018 - Shower/Bed Curtain

W3000mm x H2000mm (sold separately)

Code2-710-012

SOAP DISH WITH DRAIN – STAINLESS STEEL

Features:

• 304 Stainless Steel – satin finish• Concealed fixings• W110mm x H50mm x D108mm

Type CodeTrack System 2-710-017Shower/Bed Curtain 2-710-018


Drawer System

sHinge System

s


P.32

Was

hroo

m A

cces

sorie

sOf

fice,

Sho

p &

Was

hroo

m

Washroom


Washroom

Shower Hardware and Accessories

Code2-710-016

Code2-710-015

PHENOLIC COMPOUND FOLDING SHOWER SEAT

Features:

• 304 Stainless Steel frame• White phenolic compound single piece seat with

black edging & drainage slots• Visible fixings• Fold away lockable support leg• Low profile upright storage position• Fully compliant with AS1428.1• Width 960mm

Code2-710-021

METLAM HORIZONTAL BABY CHANGE STATION

Features:

• Hi-density bacteria resistant polyethylene body

• Stainless Steel hinge• Safety restraining strap fitted with

click lock mechanism• Gas spring design allows one-handed

opening and closing operation• Suitable for up to 20kg use• Size open: W855mm x H560mm x D495mm• Size closed: W855mm x H560mm x D107mm

32MM GRAB RAIL SHOWER KIT

Features:

• Kit comes with shower head, 2m chrome hose, chrome elbow and grab rail slider

• WELS rating: 3 star or 9 L/min



P.33

Was

hroo

m A

cces

sorie

sOf

fice,

Sho

p &

Was

hroo

m

Washroom


Washroom

Signage

• Available in either vinyl (blue with white print) or 304 stainless steel• Braille markings• Many more options available

Male Shower Female Shower Accessible Shower Cleaner

W200 x H150mm W200 x H150mm W200 x H150mm W150 x H150mm

Vinyl Code Vinyl Code Vinyl Code Vinyl Code

2-710-046 2-710-048 2-710-050 2-710-052

Stainless Steel Code Stainless Steel Code Stainless Steel Code Stainless Steel Code

2-710-047 2-710-049 2-710-051 2-710-053

Baby Change Parents Room RH Female Accessible Toilet LH Female Accessible Toilet



2-710-022 2-710-044 2-710-040 2-710-042


2-710-023 2-710-045 2-710-041 2-710-043

Male Toilet Female Toilet Male Changeroom Female Changeroom



2-710-024 2-710-026 2-710-028 2-710-030


2-710-025 2-710-027 2-710-029 2-710-031

RH Accessible Toilet LH Accessible Toilet RH Male Accessible Toilet LH Male Accessible Toilet



2-710-032 2-710-034 2-710-036 2-710-038


2-710-033 2-710-035 2-710-037 2-710-039

Lina

k C

olum

nsOf

fice,

Sho

p &

Was

hroo

m

Linak Colum

nsOffice, Shop &

Washroom



P.34

Sit N

Sta

nd D

esks

Offic

e, S

hop

& W

ashr

oom

Sit N Stand D

esksOffice, Shop &

Washroom

Electronic Sit N Stand Desks

STRAIGHT SIT N STAND DESK FRAME AND ELECTRONICS KITDesk Frame:

• Available in either Black or White• Height adjustment - 610mm to 1245mm• Fully adjustable length - 1500mm to 2100mm• 140kg total lift capacity• Supplied with adjustable feet and all bolts to construct the desk frame• Kit includes all LINAK components including: 2 x DL11 columns, control box & cables• Frames are Australian made

L-SHAPE SIT N STAND DESK FRAME AND ELECTRONICS KITDesk Frame:

• Available in either Black or White• Height adjustment - 610mm to 1245mm• Fully adjustable length - 1800mm to 2100mm in both directions• Supplied with adjustable feet and all bolts to construct the desk frame• Kit includes all Linak components including: 3 x DL11 columns, control box & cables• Frames are Australian made

Description Desk Length: Min - Max Suit Desk Top Kit

Colour Code

Sit N Stand Desk DL11 Straight Kit* 1500mm - 2100mm 600mm to 900mm

Black 1-429-930White 1-429-931

*Desktop not included with kit

Description Desk Length: Min - Max Suit Desk Top Kit

Colour Code

Sit N Stand Desk DL11 L-Shaped Kit* 1800mm - 2100mm 600mm to 900mm

Black 1-429-932White 1-429-933

*Desktop not included with kit

ELECTRONIC SIT N STAND DESKSFeatures:

• 635mm electric adjustment• 610mm to 1245mm (from floor level)• 15 seconds from sit to stand• 5 year warranty on electronics• 10 year warranty on frame• All desks are fitted with LINAK’s anti-collision program PIEZO• Length of desk is fully adjustable to meet your design requirements



P.35

Lina

k C

olum

nsOf

fice,

Sho

p &

Was

hroo

m

Linak Colum

nsOffice, Shop &

Washroom

Sit N

Sta

nd D

esks

Offic

e, S

hop

& W

ashr

oom

Sit N Stand D

esksOffice, Shop &

Washroom

Linak Columns

Dimension DL2:

LINAK A/S supplies the lifting column with either 8 or 3mm end plates. The DL2 can be prepared for built-in CBD6S.

Drawing no.: 0578006

(17.8)

36

SECTION A - A

75A

A

16

Mounting bracket (order no.: 0578006):

The mounting bracket can for example be used for placement of an extra actuator (tilt function), customised cover

(for encapsulation of the DL2), control box computer etc.

1139*

30639*

194

147

1139*

30639*

194

147

DL2 DESKLIFT COLUMNFeatures:

• 2 part rectangle lifting column• 8mm top and bottom plates for extra support• Best used for up/down tables

Technical Data Kit ColourWeight load p/column 150kgSpeed 20mm per secondInstall height 655mm - Includes 8mm top and base platesStroke length max 500mm (max height = 1155mm)Colour Natural anodised aluminium profiles and black painted end plates

Description CodeDL2 Desklift Column 1-429-888

*Add 8mm for each plate used to height measurement

SIT N STAND DESK SWITCH OPTIONS

Colour Measurements CodeBlack L = 94 x H = 25 x D = 19mm 1-429-911White L = 94 x H = 25 x D = 19mm 1-429-925

DPF1M - UP AND DOWN WITH MEMORY FUNCTION


DPF1C - UP AND DOWN WITH MEMORY FUNCTION AND DISPLAY

Colour CodeBlack 1-429-908White 1-429-910

DPH - UP AND DOWN FUNCTION

Colour Measurements CodeBlack Ø = 72 x H = 24mm 1-429-915White Ø = 72 x H = 24mm 1-429-927


Hinge Systems


P.36

Lina

k C

olum

nsOf

fice,

Sho

p &

Was

hroo

m

Linak Colum

nsOffice, Shop &

Washroom

Linak Columns

46

560

ø70

1210

ø70

46

560

ø70

1210

ø70

Dimensions:Standard version

Standard with PIEZO:

17 17.4

35.4

145

4xM6

10 46

63

17 2xM6

97

177

LINAK A/SDL11001

575 +5- 2

ø 57

1210 +8- 3

ø 70

+1 0

ø 63

.5

17

17.4

35.4

145

4xM6

17735.4

97

2xM6

63

46

17

560+5- 2

ø70+1 0

1210+8- 3

ø63.

5

ø57

1210

560

80

50

177

1210

560

80

50

177

97

177


• 3 part round lifting column• PIEZO™ Integrated Sensor• Reinforced column for extra strength and stability• PVC-free column for a more environmentally friendly product

Technical dataWeight load per column: 80kg

Speed: 38mm per secondInstall height: 560mmStroke length max: 650mm (max height = 1210mm)Colour: Black & White

Description CodeDL11 Desklift Column - Black 1-429-882DL11 Desklift Column - White 1-429-934


• 3 part lifting column• PIEZO™ Integrated Sensor• Reinforced column for extra strength and stability• PVC-free column for a more environmentally friendly product


Speed: 38mm per secondInstall height: 560mmStroke length max: 650mm (max height = 1210mm)Colour: Black




P.37

Lina

k C

olum

nsOf

fice,

Sho

p &

Was

hroo

m

Linak Colum

nsOffice, Shop &

Washroom

Linak Columns

1178

518

70

70

1178

518

70

70


• 3 part square inline column• PIEZO™ Integrated Sensor• Designed for smaller installations with 518mm install height• Designed for low built in designs• PVC-free column for a more environmentally friendly product





• 3 part rectangle lifting column• PIEZO™ Integrated Sensor• Designed for smaller installations with 518mm install height• Reinforced column for extra strength and stability




1178

518

100

60

1178

518

100

60

Lina

k Ac

cess

orie

s &

Sw

itche

sOf

fice,

Sho

p &

Was

hroo

m

Linak Accessories & Sw

itchesOffice, Shop &

Washroom


Hinge Systems


P.38

Lina

k C

olum

nsOf

fice,

Sho

p &

Was

hroo

m

Linak Colum

nsOffice, Shop &

Washroom

Linak Columns

BASELIFT BRACKET

For mounting the Baselift to the floor

Description:

Date:All rights reserved

Linear Actuator Baselift

1 May 2014

Bottom view

Top view

7912

.5 12.5 415

10 396

1080

416

5.5

350

200

440

100

Side view

Description:

Date:All rights reserved

Linear Actuator Baselift

1 May 2014

Bottom view

Top view

7912

.5 12.5 415

10 396

1080

416

5.5

350

200

440

100

Side view

BASELIFT

Technical dataWeight load per Baselift: 150kgSpeed: 14mm per secondInstall height: 100mmStroke length max: 100mm (max height = 200mm)Colour: Grey

Description CodeBaselift 1-429-897

BASELIFT CLIPS WITH TAPE

For mounting the base cover to the Baselift

Clips

Description CodeBaselift Bracket 1-429-898

Description CodeBaselift Clips with Tape 1-429-899

Features:

• Perfect for kitchen cabinets or retail counters• Allows for a 100mm adjustment in benchtop height with just a push of a button• Adjustable feet for a further 15mm height



P.39

Lina

k Ac

cess

orie

s &

Sw

itche

sOf

fice,

Sho

p &

Was

hroo

m



Washroom

Lina

k C

olum

nsOf

fice,

Sho

p &

Was

hroo

m

Linak Colum

nsOffice, Shop &

Washroom

Linak Accessories & Switches

Description CodeDeskline CBD6S 200W Control Box 1-429-895

Description CodeDeskline CBD6S 300W Control Box 1-429-896

DESKLINE CBD6S 200W CONTROL BOX

Features:

• Can be connected to 1 or 2Desklift / Baselift columns• The Control Box is designed with a soft start/stop function• The power consumption in standby mode is only 0.1W• Ultra low height of 38mm

DESKLINE CBD6S 300W CONTROL BOX

Features:

• Can be connected to 1, 2, 3 or 4 Desklift / Baselift columns• The Control Box is designed with a soft start/stop function• The power consumption in standby mode is only 0.1W• Ultra low height of 38mm

CONTROL BOX MAINS POWER CABLE

Features:

• 1 x required per Control Box• Australian plug• 3 meters long• Black

MOTOR CABLES

Features:

• 1 x required per column or Baselift• Connection of column to Control Box• Available in lengths of 500mm, 1000mm & 2000mm• Black

Type CodeControl Box Mains Power Cable 1-429-890

Length of Motor Cable Code500mm 1-429-9011000mm 1-429-9032000mm 1-429-891



P.40

Lina

k Ac

cess

orie

s &

Sw

itche

sOf

fice,

Sho

p &

Was

hroo

m



Washroom

Linak Accessories & Switches

Description Code45° Bracket 1-429-919

Description Code90° Bracket 1-429-917

Mounting of the DPF:the dpf must be mounted via a mounting bracket. the mounting bracket comes in 4 different versions depending on how the panel should be mounted. Below are some examples on ways to mount:

Example 1: (Article number 914759)the panel is mounted with a 90° bracket and placed closed to the tabletop.

Example 3: (Article number 914760)the panel is mounted with a 45° bracket and placed at the edge of the tabletop.

Example 4: (Article number 914785)the panel is mounted with a 45° bracket and placed on a tabletop with angled front.

Example 2: (Article number 914757)the panel is mounted with a 90° bracket and placed with a distance to the tabletop.

To mount the panel: Just click the panel into the bracket and it is fixed.

Drawings of the mounting brackets:

Article number 914759


















































DPF1M - UP AND DOWN WITH MEMORY FUNCTION

Features:

• Control panel for simple up and down or with memory• Available in black or white with chrome print• Comes with 1700mm cable• Suitable for desk mounting - Bracket sold separately (see below)

DPF1C - UP AND DOWN WITH MEMORY FUNCTION AND DISPLAY

Features:

• Control panel for simple up and down or with 3 memory positions• LED display for easy adjustment to known heights• Available in black or white with chrome print• Comes with 1700mm cable• Suitable for desk mounting - Bracket sold separately (see below)

MOUNTING BRACKETS FOR DPF CONTROL UNITS

Features:

• The DPF must be mounted via a mounting bracket• To mount the panel: Just click the panel into the bracket and it is fixed• Made from steel

90° DESK BRACKET

The panel is mounted with a 90° bracket and placed closed to the tabletop.

45° DESK BRACKET

The panel is mounted with a 45° bracket and placed at the edge of the tabletop.



P.41

Lina

k Ac

cess

orie

s &

Sw

itche

sOf

fice,

Sho

p &

Was

hroo

m



Washroom

Switches and Controls

Colour CodeBlack 1-429-908White 1-429-910

Description CodeRemote Control and Receiver Kit 1-429-935

Colour Measurements CodeBlack Ø = 72 x H = 24mm 1-429-915White Ø = 72 x H = 24mm 1-429-927

DPH - UP AND DOWN FUNCTION

Features:

• Up and down function via the arrows• Available in black or white with chrome print• Comes with 1580mm black cable• Suitable for flush mounting

DPT - UP AND DOWN WITH MEMORY FUNCTION AND DISPLAY

Features:

• Control panel for simple up and down or with 3 memory positions• LED display for easy adjustment in either inches or cm• Available in black or white with chrome print• Comes with 1580mm cable• Suitable for flush mounting

REMOTE CONTROL AND RECEIVER KIT

Features:

• The wireless system is based on radio frequency technology and is perfect for TV lifts and table lifts where cable are undesired

• Kit includes 1 x wireless receiver, 1 x remote control handset, 1 x link cable (L2000mm) & 1 x backup switch

Documents

EVOLINE POWER OUTLETS THE E-PLACE DESIGN ... › content › dam › lincoln...Shelf Stripping P. 2 Shelf Rail P. 4 Keyboard & Cable Outlets P. 5 EVOline Power Outlets P. 6 CD & DVD