A ready-to-use wear plate fabricated from Carbon Steel platewith single or multi-layer fusion welded coating.

42

EWAC Wear Plates

Wear Plate Dimension:

Unique Features:

Note:

a) Base Plate Dimension: 1220 x 2740mmb) Base Plate Thickness: 5mm and abovec) Cladding Thickness: 3mm and above

Manufactured using 3 axis robot welding technique and controlled ‘cool’ welding process.

Overlay with a dense, extremely tough and consistent microstructure.

Cladding with low dilution, uniform hardness and exceptional wear properties.

Stress-relief cracks perpendicular to the welding direction, which does not propagate to the base metal.

In addition to the standard plate, specific shape & size of the pate can be cut, bend and fabricated as per requirement.

•

•

•

•

EDP - 550 EDP - 950EDP - 750EDP - 650

Typical Application:

Description:

Hardness:

Liners / Components which are subjected to Abrasion / Impact (Screens in Steel Industry)

Cr-C System for good abrasion andmoderate impact applications upto

0250 C

54-58 HRc

Earth moving bucket BLT ChuteBlade Liner for Fan impellerTranser Chute

Typical Application:

Description:

Hardness:

Liners / Components which are subjected to severe Abrasion (Screens in steel industry / Fan casting / VRM liners etc).

Cr-B-C System for high abrasion and low impact applications upto

0250 C

58-62 HRc

Typical Application:

Description:

Hardness:

Liners / Components which are subjected to high Abrasion / Impact.

Cr-Nb-C System for severe abrasion andmedium impact applications upto

0450 C

58-64 HRc

Typical Application:

Description:

Hardness:

BLT d i s t r ibu t ion chutes / MTA plates, Hot gas ventilators, hot gas ducts / pipes.

Complex carbide system for severe abrasion and erosion applications upto

0650 C

58-64 HRc