7
1 EWS320AP New Product Setup for Distribution & Messaging Guide Model (SKU): EWS320AP Product Name: Dual-Band Wireless N900 Managed Indoor Access Point UPC number: 6 55216 00712 3 MSRP: $499 Product Short Description: The EWS320AP is a Ceiling Mount, Dual-Band Neutron Series N900 Managed Wireless solution Managed Indoor Access Point. Product 25 word Description: The EWS320AP is a high-powered, long-range, ceiling-mount, Dual-Band Neutron Series N900 Managed Wireless solution Indoor Access Point that functions as a stand- alone AP or as part of an EnGenius Neutron Series Wireless Management solution. Product 50 word Description: The EWS320AP is a high-powered, long-range, ceiling-mount, Dual-Band Neutron Series N900 Managed Wireless solution Indoor Access Point that functions as a stand- alone AP or as part of an EnGenius Neutron Series Wireless Management solution. It features a high transmit RF power of up to 28 dBm on each frequency band for wall, floor and ceiling penetrating connectivity. Product Long Description: The EWS320AP is a high-powered, long-range, ceiling-mount, Dual-Band Neutron Series N900 Managed Wireless solution Wireless N900 Indoor Access Point that functions as a stand-alone Access Point or as part of an EnGenius Neutron Series Wireless Management solution for expanding user capacity and extending networks wirelessly within large buildings. It features a high transmit RF power of up to 28 dBm on each frequency band for wall, floor and ceiling penetrating connectivity. The EWS320AP can operate as a stand-alone Access Point connecting to third-party PoE-capable switches but more control and versatile management of the Access Point is achievable when it is part of an EnGenius Neutron Series Wireless Network Management solution because the AP includes firmware that enables it to be immediately discovered, configured, monitored and managed from a compatible Neutron Series PoE+ Layer 2 Switch (EWS5912FP, EWS7928FP or EWS7952FP). This capability enables IT managers to deploy and manage up to 50 EWS320APs from a 24- or 48-port Neutron Series Switch allowing for simplified management from one browser-based interface including simultaneous firmware upgrades, clustering, traffic monitoring, bandwidth steering and many other features that can be reset or reconfigured from the convenience of the IT manager’s desktop.

EWS320AP - Wireless Networking & Telephony … Operating in both the 2.4 GHz and 5 GHz frequency spectrums and supporting 802.11a/b/g/n standards the EWS320AP features wireless speeds

Embed Size (px)

Citation preview

1  

EWS320AP New Product Setup for Distribution

& Messaging Guide

Model (SKU): EWS320AP Product Name: Dual-Band Wireless N900 Managed Indoor Access Point UPC number: 6 55216 00712 3

MSRP: $499 Product Short Description: The EWS320AP is a Ceiling Mount, Dual-Band Neutron Series N900 Managed Wireless solution Managed Indoor Access Point. Product 25 word Description: The EWS320AP is a high-powered, long-range, ceiling-mount, Dual-Band Neutron Series N900 Managed Wireless solution Indoor Access Point that functions as a stand-alone AP or as part of an EnGenius Neutron Series Wireless Management solution. Product 50 word Description: The EWS320AP is a high-powered, long-range, ceiling-mount, Dual-Band Neutron Series N900 Managed Wireless solution Indoor Access Point that functions as a stand-alone AP or as part of an EnGenius Neutron Series Wireless Management solution. It features a high transmit RF power of up to 28 dBm on each frequency band for wall, floor and ceiling penetrating connectivity. Product Long Description: The EWS320AP is a high-powered, long-range, ceiling-mount, Dual-Band Neutron Series N900 Managed Wireless solution Wireless N900 Indoor Access Point that functions as a stand-alone Access Point or as part of an EnGenius Neutron Series Wireless Management solution for expanding user capacity and extending networks wirelessly within large buildings. It features a high transmit RF power of up to 28 dBm on each frequency band for wall, floor and ceiling penetrating connectivity. The EWS320AP can operate as a stand-alone Access Point connecting to third-party PoE-capable switches but more control and versatile management of the Access Point is achievable when it is part of an EnGenius Neutron Series Wireless Network Management solution because the AP includes firmware that enables it to be immediately discovered, configured, monitored and managed from a compatible Neutron Series PoE+ Layer 2 Switch (EWS5912FP, EWS7928FP or EWS7952FP). This capability enables IT managers to deploy and manage up to 50 EWS320APs from a 24- or 48-port Neutron Series Switch allowing for simplified management from one browser-based interface including simultaneous firmware upgrades, clustering, traffic monitoring, bandwidth steering and many other features that can be reset or reconfigured from the convenience of the IT manager’s desktop.

2  

Operating in both the 2.4 GHz and 5 GHz frequency spectrums and supporting 802.11a/b/g/n standards the EWS320AP features wireless speeds up to 450 Mbps on each radio, a Gigabit port for connecting to 802.3at-capable PoE Switches, and an enhanced receive sensitivity MIMO (Multiple In / Multiple Out) antenna array. As a result, the EWS320AP is ideal for spacious environments such as large homes, small and medium-sized businesses, multiple-floor offices, hotels, hospitals, and other multi-floor buildings. As the EWS320AP is designed for deployments on ceilings where power outlets may be scarce, it also comes equipped with PoE (Power-over-Ethernet) IEEE 802.3at for use with an 802.3at-capable PoE injector or 802.3at-capable PoE Switches, drawing up to 22 watts of power. Paired with other Neutron Series Access Points and Switches, the EWS320AP helps to make managing a network easier with its standardized GUI. To protect sensitive data during wireless transmissions, the EWS320AP offers different industry-standard encryption settings for wireless transmissions, including WPA, WPA2, WPA 2 AES encryption. It also includes MAC address filtering to allow network administrators to offer network access only to verified computers and devices based on their MAC addresses. Bullet Points / Differentiators:

Can operate as a stand-alone Access Point or part of a Neutron Series Wireless Management solution deployment

Up to 28 dBm high RF power on its 2.4/5 GHz bands for longer range and enhanced wireless coverage

Supports IEEE802.11a/b/g/n wireless standards with up to a 450 Mbps data rate on each band

Designed for indoor ceiling deployments 6 internal MIMO antennas Can be used with included the power adapter or via PoE with PoE 802.3at

capable Switches or injectors Dual-band/Three Stream Band Steering shifts Dual-band clients to 5 GHz for better throughput

performance Secured Guest Network

Key Features / Benefits

Neutron Series Access Point o Can be configured, managed and monitored with several Neutron Series

Access Points from the browser-based interface of one Neutron Series Wireless Management Layer 2 PoE+ Switch.

o After a Neutron Series Layer PoE+ Switch discovers the EWS320AP it can be "added" and set to be "managed" by the Switch.

3  

o The Neutron Wireless Management solution supports bulk firmware upgrades and other features that can be set and managed across deployed Neutron Series Access Points simultaneously.

Wireless Speeds o Up to 450 Mbps on each of the 2.4 and 5 GHz frequency bands for faster

file transfers and smoother video streaming. Dual-Band for Expanded User Capacity

o 802.11n concurrent Dual-band operation in the 2.4 GHz and 5 GHz Three Stream

o Increased throughput for better performance over Dual Stream Access Points.

High Power, Long-Range and Multiple Floor Penetration o 28 dBm on each band provides more than twice the wireless coverage

over mainstream competitors and enables the wireless signal to penetrate floors, ceilings, and walls for greater device connectivity.

o Internal MIMO antenna array provides better reception and performance as clients change their orientation.

SSID-to-VLAN Tagging o Can be configured to broadcast up to eight (16) SSIDs (8 SSIDs per

frequency band). Each SSID can be tagged to a specified network VLAN for different user access tiers based on established access rights.

TECHNICAL SPECIFICATIONS

Standard -IEEE802.11b/g/n on 2.4 GHz -IEEE 802.11a/n on 5 GHz -IEEE802.3at Antenna 6 Internal MIMO antennas Physical Interface 10/100/1000 Gigabit Ethernet Port Reset Button Power Connector LED Indicator -Power -WPS -WLAN (Wireless Connection) -LAN Power Requirements -External Power Adapter -DC IN, 12V/2A Operation Modes -Access Point Security

4  

-WEP (64/128 bit) -WPA/WPA2 (TKIP/AES) -Hidden ESSID -MAC address filtering, up to 50 field -L2 Isolation -802.1X Authenticator (MD5/TLS/TTLS/PEAP) -Guest Network QoS (Quality of Service) -WMM (Wireless Multimedia) Environment & Mechanical Temperature Range Operating: 32 to 104°F/0 to 40°C Temperature: -4°F to 140°F (-20°C to 60 °C) Humidity (Non-condensing): 90% or less Physical Security - Kensington Security Slot Package Contents • EWS320AP Dual-band Wireless N900 Managed Indoor Access Point • 12 V/2A Power Adapter • T-Rail Mounting Kit • Ceiling and Wall Mount Screw Kit • Mounting Bracket • RJ-45 Ethernet Cable • Quick Installation Guide Device, Packaging & Master Carton Dimensions & Weights: EWS320AP Device Weight: 0.8 Ibs Width: 6.36” (161.54 mm) Length: 6.36” (161.54 mm) Height: 1.64” (41.66 mm) Packaging Weight: 1.97 lbs Width: 9.2” Length: 12” Height: 3” Master Carton Weight: 25 lbs Width: 15.25” Length: 19” Height: 13” No. of product boxes per master carton: 10 units Warranty: 1 Year

5  

Product Image:

6  

Maximum data rates are based on IEEE 802.11 standards. Actual throughput and range may vary depending on distance between devices or traffic and bandwidth load in the network. Features and specifications subject to change without notice. Trademarks and registered trademarks are the property of their respective owners. For United States of America: Copyright ©2014 EnGenius Technologies, Inc. All rights reserved. Compliant with FCC - This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This

7  

equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his/her own expense.