excellence DELMIA V5.19 extends digital manufacturing for

IBM United States Software Announcement208-265, dated September 23, 2008

IBM United States Software Announcement208-265

IBM is a registered trademark of International Business Machines Corporation 1

DELMIA V5.19 extends digital manufacturing for productionexcellence

Table of contents

1 Key prerequisites 11 Education support 2 Planned availability date 11 Technical information 2 Description 19 Ordering information 3 Product positioning 30 Terms and conditions 4 Reference information 33 Prices 4 Program number

At a glance

DELMIA V5.19:

• Introduces the Work Instruction Composer to speed the delivery of work instructions to theshop floor

• Adds capabilities to support the high technology and automotive domains

• Adds key DELMIA Automation products to the Version 5 product lifecycle management (PLM)portfolio

• Supplies new general assembly planning and simulation solutions

Overview

DELMIA V5.19 extends digital manufacturing by adding three new configurations and eight newproducts. In addition, six products that were previously available only in configurations are nowavailable as add-on products so they can be used to create or extend custom configurations.

The DELMIA - Work Instruction Composer (5671-WKC), a Process Planning product, lets userscreate and manage 3D model-driven work instructions from large data sets in a configuredprocess plan and send them to their manufacturing execution system. Because an instructionthat is common to multiple processes is managed as a single instance, consistent change controlis assured.

The high-technology and automotive domains will benefit from new capabilities in variantplanning and line balancing with the ability to assign processes to multiple product variantsthrough a product-process variant matrix. Line balancing capabilities are now even more flexibleto support multiple product variants and to accommodate plans that assign single workers tomultiple tasks, stations, or machines.

The two new controlled workcell configurations in DELMIA V5.19 extend product lifecyclemanagement (PLM) into the automation domain. These configurations allow users to createlibraries of SmartDevices and complete controlled workcells and then apply them whenvalidating and optimizing controls logic.

Key prerequisites

DELMIA V5.19 runs on selected versions of:

• Microsoft® Windows®

• IBM® AIX®



• Hewlett Packard HP-UX

• Sun Solaris

Planned availability date

October 3, 2008

Description

Introduction of DELMIA - Work Instruction Composer

DELMIA - Work Instruction Composer, a power solution, delivers the capability to create andmanage 3D model-based work instructions from a configured process plan. Users of theDELMIA-ENOVIA Manufacturing Hub can combine the power of configuration managed processplans with the ease of use of 3DVIA composer for an unparalleled user experience.

Key capabilities include:

• 3D Model-based work instructions based upon a configured engineering dataset

• Minimized effort required to incorporate design-driven or manufacturing-driven changes intopre-existing work instruction datasets

• An intuitive, easy-to-use interface for authoring and viewing 3D work instructions

• The ability to send work instructions to a manufacturing execution system (MES) for viewingon the shop floor

New capabilities for the high-tech and automotive domains

Manufactures in the high-tech and automotive domains will benefit from new capabilities invariant planning and line balancing delivered in V5.19. Companies with a large number ofproduct variants now have the ability to view a process-product variant matrix. The matrix allowsthem to quickly identify what processes are unique to a product variant and those that are sharedacross multiple product variants. Users can reduce their planning effort by assigning processesto multiple product variants through the matrix.

Additionally, automatic line balancing capabilities have been enhanced to support multipleproduct variants at the same time. Other new line balancing capabilities take into considerationplans that assign a worker to multiple tasks, stations, and machines.

Extending DELMIA Automation into the PLM portfolio

Controls engineers can now combine the power of DELMIA Automation's virtual commissioningand SmartDevice building with the collaborative data management capabilities of the DELMIA-ENOVIA Manufacturing Hub. This breakthrough is of particular benefit to the following domains:

• Industrial equipment

• High-tech

• Automotive body-in-white and stamping

• Consumer packaged goods

The foundation for this capability is the two new Controlled Workcell configurations.

• DELMIA - Controlled Workcell Builder, which allows the user to create and maintain librariesof SmartDevices (devices that utilize controls logic), complete with their control logic. Inaddition, this solution allows the user to define a workcell, a workstation, or a complete lineand to validate the controls logic.

• DELMIA - Controlled Workcell Validation, which allows users to retrieve SmartDevices from alibrary and create, validate, and optimize the controls logic.



Both DELMIA - Controlled Workcell Builder and DELMIA - Controlled Workcell Validation arefully supported in the DELMIA-ENOVIA Manufacturing Hub environment.

Accessibility by people with disabilities

Owing to the graphics-intensive nature of its engineering design applications, this product hasbeen granted a deviation.

Product positioning

DELMIA Version 5 brings together a set of digital manufacturing solutions targeted forindustrial sectors in which continuing optimization is a determinant factor. These solutions allowmanufacturers to bring their products to market more quickly, while reducing production costsand encouraging innovation.

DELMIA Version 5 digital manufacturing solutions assist industries where continuoustransformation and optimization of manufacturing processes are critical. These includeautomotive, aerospace and defense, fabrication and assembly, electrical and electronic,consumer goods, and shipbuilding. The DELMIA Version 5 PLM suite of computer-aidedprocess planning and engineering solutions enables companies to achieve lean, build-to-ordermanufacturing by fostering a concurrent engineering environment. Coverage extends fromthe conceptual phase of product and process design, through simulation and monitoring ofmanufacturing processes, to shop floor operations, such as capacity planning, implementationand monitoring.

DELMIA Version 5 digital manufacturing solutions deliver many benefits, including:

• Comprehensive process planning in the early design phase

• Maximization of production efficiency and factory utilization

• Optimization of investment

• Ability to capture and reuse best practices and enterprise knowledge

• Ability to anticipate and correct potential problems in the design and manufacturing pipeline

• Derivation and carry-over of process engineering and production resources

• Reduction of time-to-market and manufacturing costs

• Reduction in the time required to start production and related costs

• Ability to improve time-to-volume

• Ability to foster innovation of products and processes

• Ability to gain maximum profitability

IBM has worked with thousands of manufacturers of all sizes around the world to implementsolutions designed to enhance product development and streamline manufacturing processes.

• PLM solutions from IBM have become the industry standard for OEMs, supply chain partners,and suppliers.

• IBM has over 31,000 PLM customers worldwide in a wide range of industries that includeautomotive, aerospace, industrial products, electronics, chemicals, and petroleum.

• IBM does not just install technology. We serve as a trusted advisor to provide the best-of-breed PLM applications, IT environment, integration capabilities, and business strategy to helpyou achieve your business objectives.

• IBM and Dassault Systemes have partnered for over 20 years to develop and deliver leadingPLM solutions.

• IBM and Dassault Systemes have one of the largest PLM practices in the world with over2,000 application engineers and consultants worldwide.

• Dassault Systemes, IBM, and our clients have teamed to implement Dassault Systemes andIBM technology to power digital manufacturing, resulting in significant return on investment(ROI) and improvements in manufacturing and engineering effectiveness.



• IBM Global Business Solutions also has a complete suite of services offerings around theDELMIA, CATIA, ENOVIA VPLM, and ENOVIA SmarTeam products, including consulting,planning, implementation, integration, training, support, and managed services.

Hardware and software support services

SmoothStart/installation services

IBM SmoothStart/Installation Services are not available for DELMIA Version 5 products.

DELMIA Version 5 services plan

PLM Services, part of IBM Global Business Services, offers a robust portfolio of services toassist with the implementation of DELMIA Version 5. Careful planning and implementation areessential to getting the most from DELMIA Version 5.

IBM can help with assessment, solution design, planning, installation, data migration, customapplication development, best-practices consulting, user and administrative training, support,and project management.

For additional information on service offerings and how IBM professionals can assist with theimplementation of DELMIA Version 5 in your environment, contact an IBM representative or IBMServices organization, or visit

http://www.ibm.com/software/plm/services

Under Further information, select Find out more about IBM PLM services.

Reference information

For information about CATIA V5.19, refer to Software Announcement 208-218, dated September23, 2008.

For information about ENOVIA VPLM V5.19, refer to Software Announcement 208-219, datedSeptember 23, 2008.

For information about ENOVIA SmarTeam V5.19, refer to Software Announcement 208-217,dated September 23, 2008.

Program number

Note: VRM for all configurations and products is 5.19.0.

DELMIA Process Detailing and Validation configurations

Program number Program name

5672-AP2 DELMIA - DPM Assembly 25672-BP2 DELMIA - DPM Body in White 25672-BX2 DELMIA - DPM Body in White XT 25672-CB2 DELMIA - Controlled Workcell Builder 2*5672-CW2 DELMIA - Controlled Workcell Validation 2*5672-DA2 DELMIA - All-in-One Marketing 25672-DS2 DELMIA - DPM Structure 25672-EA2 DELMIA - DPM ENVISION Assembly 25672-FP2 DELMIA - Robotics Paint Foundation 2*5672-MB2 DELMIA - NC Machine Tool Builder 25672-MF2 DELMIA - Manufacturing Simulation Foundation 25672-MP2 DELMIA - Machining Foundation 25672-PD2 DELMIA - DPM Process Definition 25672-PP2 DELMIA - DPM Machining 25672-PR2 DELMIA - DPM Review 25672-SF2 DELMIA - DPM Shop 25672-SP2 DELMIA - Structure Manufacturing

http://www.ibm.com/software/plm/services

http://www.ibm.com/common/ssi/cgi-bin/ssialias?infotype=an&subtype=ca&appname=gpateam&supplier=897&letternum=ENUS208-218





Preparation 25672-SR2 DELMIA - Shop Order Release 25672-VT2 DELMIA - NC Machine Tool Simulation 25672-WL2 DELMIA - Robotics Simulation 25672-XP2 DELMIA - DPM Process & Resource Definition 2

DELMIA Process Detailing and Validation shareable products


5672-IDP DELMIA - MultiCAx ID Plug-in5672-MAC DELMIA - Human Preferred Angle Catalog 25672-MAP DELMIA - MultiCAx AD Plug-in5672-MEP DELMIA - MultiCAx SE Plug5672-MFR DELMIA - DMU Fastening Review 25672-MGP DELMIA - MultiCAx IGES Plug-in5672-MHA DELMIA - Human Activity Analysis 25672-MHB DELMIA - Human Builder 25672-MHC DELMIA - Human Task Catalog 25672-MHM DELMIA - Human Measurements Editor 25672-MHP DELMIA - Human Posture Analysis 25672-MHT DELMIA - Human Task Simulation 25672-MK1 DELMIA - Product Knowledge Template 15672-MPC DELMIA - Human Posture Catalog 25672-MRR DELMIA - Real Time Rendering 25672-MSP DELMIA - MultiCAx SolidWorks Plug-in5672-MST DELMIA - STEP Core Interface 15672-MTC DELMIA - Human Anthropometry Catalog 25672-MTP DELMIA - MultiCAx STEP Plug-in5672-PDP DELMIA - MultiCAx PD Plug-in5672-UDP DELMIA - MultiCAx UD Plug-in

DELMIA Process Detailing and Validation add-on products (AOPs)


5674-APN DELMIA - DPM Assembly Process Planner 25674-APS DELMIA - DPM Assembly Process Simulation 25674-ARW DELMIA - Arc Welding 25674-BWP DELMIA - DPM Fastening Process Planner 25674-DBG DELMIA - Device Building 25674-DC1 DELMIA Automation - CSM Device Control Connection 1*5674-DHR DELMIA - DPM Human Review 25674-DLD DELMIA Automation - CLM Device Logic Design 2*5674-DST DELMIA - DPM Structure Lofting 2*5674-EHS DELMIA - Electrical Harness Process Simulation 25674-EIP DELMIA - DPM Engineering Requirements Planner 25674-ELR DELMIA - Electrical Review 25674-FB1 DELMIA Automation - CLM FBD Editor 1*5674-FRM DELMIA - Part Design Features Recognition 15674-GSM DELMIA - Generative Shape Design 15674-HP1 DELMIA Automation - HMI Control Panel Design 1*5674-IDP DELMIA - MultiCAx ID Plug-in5674-LB1 DELMIA Automation - CSM Module & Block Editor*5674-LE1 DELMIA Automation - CLM SFC Editor 15674-LL1 DELMIA Automation - CLM Ladder Logic Editor 1*5674-LS1 DELMIA Automation - CLM Simulation Engine 15674-MAC DELMIA - Human Preferred Angle Catalog 25674-MAP DELMIA - MultiCAx AD Plug-in5674-MDU DELMIA - DMU Navigator 15674-MEC DELMIA - Electrical 3D Design & Documentation 1*5674-MEP DELMIA - MultiCAx SE Plug-in5674-MEQ DELMIA - Equipment Arrangement 25674-MFR DELMIA - DMU Fastening Review 25674-MFT DELMIA - 3D Functional Tolerancing and Annotation 25674-MG1 DELMIA - Generative Drafting 15674-MGD DELMIA - Generative Drafting 25674-MGP DELMIA - MultiCAx IGES Plug-in5674-MGS DELMIA - Generative Part Structure Analysis 2*5674-MHA DELMIA - Human Activity Analysis 2



5674-MHB DELMIA - Human Builder 25674-MHC DELMIA - Human Task Catalog 25674-MHM DELMIA - Human Measurements Editor 25674-MHP DELMIA - Human Posture Analysis 25674-MHT DELMIA - Human Task Simulation 25674-MID DELMIA - Interactive Drafting 15674-MIG DELMIA - IGES Interface 15674-MK1 DELMIA - Product Knowledge Template 15674-MKE DELMIA - Knowledge Expert 25674-MLM DELMIA - Lathe Machining 2*5674-MMA DELMIA - Prismatic Machining Preparation Assistant 25674-MML DELMIA - Multi-Slide Lathe Machining 25674-MMM DELMIA - Multi-Axis Surface Machining 25674-MNC DELMIA - NC Manufacturing Review 2*5674-MNV DELMIA - DMU Navigator 25674-MOP DELMIA - DMU Optimizer 25674-MPC DELMIA - Human Posture Catalog 25674-MPM DELMIA - Prismatic Machining 2*5674-MPR DELMIA - Composite Review 25674-MPS DELMIA - NC Machine Tool Simulation 25674-MRL DELMIA - Resource Layout 25674-MRR DELMIA - Real Time Rendering 25674-MSA DELMIA - DMU Space Analysis 25674-MSD DELMIA - Manufacturing System Definition 25674-MSM DELMIA - 3 Axis Surface Machining 25674-MSP DELMIA - MultiCAx SolidWorks Plug-in5674-MST DELMIA - STEP Core Interface 15672-MTC DELMIA - Human Anthropometry Catalog 25674-MTP DELMIA - MultiCAx STEP Plug-in5674-MTR DELMIA - DMU Dimensioning and Tolerancing Review 15674-MTT DELMIA - Machining Tolerancing Assistant 25674-MVG DELMIA - NC Manufacturing Verification 25674-OLP DELMIA - Robotics OLP 25674-PCR DELMIA - Process Context Builder 25674-PDP DELMIA - MultiCAx PD Plug-in5674-PLT DELMIA - Plant Layout 25674-PRL DELMIA - PPR Manufacturing Lifecycle Management 25674-PRM DELMIA - PRR Manufacturing Hub Navigator 2*5674-PRR DELMIA - PPR Editor 25674-PSY DELMIA - Production System Analysis 25674-PTP DELMIA - DPM Machining Process Planner 25674-RRS DELMIA - RRS I 25674-RST DELMIA - RRS II 25674-SHF DELMIA - DPM Shop Floor Viewer 25674-SOR DELMIA - Shop Order Release 25674-SPR DELMIA - Surface Path Generator 25674-SRL DELMIA - Standard Robot Library 25674-TSA DELMIA - Tool Selection Assistant 25674-UDP DELMIA - MultiCAx UD Plug-in5674-WKI DELMIA - DPM Workcell Instructions 25674-WSQ DELMIA - DPM Workcell Sequencing 25674-WSU DELMIA - Device Task Definition 2

DELMIA Version 5 Process Planning configurations


5671-EAC DELMIA - ENOVIA Manufacturing Hub Access Configuration5671-EAM DELMIA - All-in-One Process Engineer Marketing Configuration*5671-EEC DELMIA - Process Engineer Configuration5671-EIC DELMIA - Industrial Engineer Configuration5671-EPC DELMIA - PPR Navigator for Manufacturing Hub Configuration5671-ERC DELMIA - Process & Resource Planner Configuration

DELMIA Version 5 Process Planning products


5671-ALB DELMIA - Automatic Line Balancing5671-CEF DELMIA - Configuration & Effectivity5671-E4M DELMIA - ENOVIA VPM Connection



5671-E5M DELMIA - ENOVIA VPM V5 Connection5671-EPR DELMIA - Process & Resource Planning5671-L2P DELMIA - Layout Planning**5671-MCM DELMIA - Manufacturing Change Management5671-PVW DELMIA - Product Viewing5671-SDC DELMIA - Standard Time Measurement Datacard5671-SMO DELMIA - Standard Time Measurement MOST5671-SMT DELMIA - Standard Time Measurement MTM15671-SSA DELMIA - Standard Time Measurement SAM5671-STM DELMIA - Standard Time Measurement5671-SVA DELMIA - Standard Time Measurement Value Added5671-SWF DELMIA - Standard Time Measurement WF5671-WKC DELMIA - Work Instruction Composer*5671-WLB DELMIA - Workload Balancing

DELMIA Version 5 softcopy publications


5672-NL8 National Language Softcopy Collection Kit * New in this release** Name changed from DELMIA - 2D Layout Planning

Release summary

New DELMIA Process Detailing and Validation configurations


5672-CB2 DELMIA - Controlled Workcell Builder 25672-CW2 DELMIA - Controlled Workcell Validation 25672-FP2 DELMIA - Robotics Paint Foundation 2

New DELMIA Process Detailing and Validation add-on products (AOPs)

Program number Program name 5674-DLD DELMIA Automation - CLM Device Logic Design 25674-FB1 DELMIA Automation - CLM FBD Editor 15674-LL1 DELMIA Automation - CLM Ladder Logic Editor 15674-DC1 DELMIA Automation - CSM Device Control Connection 15674-LB1 DELMIA Automation - CSM Module & Block Editor 15674-HP1 DELMIA Automation - HMI Control Panel Design 15674-DST DELMIA - DPM Structure Lofting 2*5674-MEC DELMIA - Electrical 3D Design & Documentation 15674-MGS DELMIA - Generative Part Structural Analysis 2*5674-MLM DELMIA - Lathe Machining 2*5674-MNC DELMIA - NC Manufacturing Review 2*5674-MPM DELMIA - Prismatic Machining 2*5674-PRM DELMIA - PPR Manufacturing Hub Navigator 2*

* Previously available only as included in a configuration.

Withdrawn DELMIA Process Detailing and Validation add-on products (AOPs)


5674-PSS DELMIA - Production System Simulation 2 AOP

New DELMIA Process Planning products


5671-WKC DELMIA - Work Instruction Composer Product

Renamed DELMIA Process Planning products

The following products are renamed as indicated. Product identifiers are unchanged.

Productidentifier Old name New name

5671-L2P DELMIA - 2D Layout Planning DELMIA - Layout Planning DELMIA - 3D Layout Planning DELMIA - Layout Viewer



(included-only product)

Process Planning and Validation

New configurations

DELMIA - Controlled Workcell Builder 2 (5672-CB2)

DELMIA - Controlled Workcell Builder 2 combines control logic creation with robotic simulation toprovide a powerful tool to integrate automation into the workcell design environment. To begin,Controlled Workcell Builder allows the user to create and maintain libraries of SmartDevices(devices that use controls logic), complete with their control logic. It allows the authoring ofnominal behaviors and the establishment of I/O connections. Users can also create controlledworkcells, controlled work stations, and even complete controlled lines to create and validate thecontrols logic. The creation of SmartDevice libraries allows reuse of the devices and the controlslogic, reducing the time required to build virtual equipment.

DELMIA - Controlled Workcell Builder 2 is fully supported in the DELMIA-ENOVIA ManufacturingHub environment.

DELMIA - Controlled Workcell Validation 2 (5672-CW2)

DELMIA - Controlled Workcell Validation 2 allows users to retrieve DELMIA Controlled DeviceBuilder models and validate, analyze, and optimize the controls logic. It allows the userto connect a logic controller and validate and analyze control logic of the system throughsimulation.

DELMIA - Controlled Workcell Validation 2 is fully supported in the DELMIA-ENOVIAManufacturing Hub environment.

DELMIA - Robotics Paint Foundation 2 (5672-FP2)

The DELMIA - Robotics Paint Foundation 2 configuration provides the foundation for CENITSoftware's FastSurf Paint Simulation software. The base of the configuration is the DELMIA- Robotics Simulation configuration with the addition of DELMIA - Generative Part StructureAnalysis and DELMIA - Surface Path Generator. DELMIA Version 5 robotics is a powerful,integrated solution that enables manufacturing organizations to design, simulate, optimize, andprogram robotic workcells in a 3D digital factory environment.

CENIT FastSurf provides various robot painting functions for robot painting process simulation.FastSurf can be used for the development of a complete robot painting simulation withsynchronization of all resources. The FastSurf application offers a highly productive and intuitivesimulation environment providing different tools to fulfill robot painting simulation needs. FastSurfleverages and contributes to the concurrent engineering capabilities of PLM by providing an end-to-end solution that incorporates a single, unified interface for complete paint process definitionand resource programming.

New products

DELMIA Automation - CLM Device Logic Design 2 AOP (5674-DLD)

DELMIA Automation - CLM Device Logic Design provides the capability to create and edit theinternal logic for a single component or an entire station, then to test that internal logic throughsimulation.

SmartDevice builder workbench functions are:

• Create and edit internal logic

• Simulate the logic

• Build the hierarchy of devices (add sub-device logic to the parent)

• Propagate the logic from the child to the parent using a wizard

• Create a testing scenario at the device level



Logic design workbench functions are:

• Create types, functions, and constants

• Perform block editing

• Launch the SFC logic editor

• Build and debug logic

DELMIA Automation - CLM FBD Editor 1 AOP (5674-FB1)

The CLM FBD Editor provides tools to create, edit, simulate, and debug the behavior of afunction block diagram (FBD) CSM block. A function block diagram is composed of a set ofblock instances that are made up of input ports, output ports, and two control ports for activationcondition and reset condition.

The CLM FBD Editor is based on the IEC 61131-3 standard and delivers the set of tools tocreate, debug, and test the logic of an FBD CSM block. A library of elementary blocks is alsoincluded.

Additionally, the Editor can mix FBD blocks with other CSM blocks (SFC and Ladder) and canimport Simulink discrete blocks.

DELMIA Automation - CLM Ladder Logic Editor 1 AOP (5674-LL1)

The CLM Ladder Logic Editor provides tools to create, edit, simulate, and debug the behaviorof a Ladder diagram CSM Block. Ladder Diagrams are graphic representations of Booleanequations. The CLM Ladder Logic Editor is based on the IEC 61131-3 Standard and delivers aset of tools to create, debug, and test the logic of a Ladder Diagram CSM Block.

DELMIA Automation - CSM Device Control Connection 1 AOP (5674-DC1)

CSM Device Control Connection provides a link between the 3D simulation and the PLC (virtualor physical). It allows users to:

• Map the PLC program logical I/Os to the virtual equipment I/Os via a physical PLC or a virtualPLC

• When provided by the PLC manufacturer or the Athys generic Virtual PLC Engine

– Debug and validate a complete PLC program against the virtual equipment without anyphysical prototype

– Complete a virtual factory model including how control logic can be simulated

– Simulate the start/restart of a cell/line in a virtual environment

– Use simulation to validate the safety aspects of a cell/line

CSM Device Control Connection allows users to:

• Validate PLC logic in a virtual environment

• Find problems early

• Perform validations in a safe environment where errors will not cause damage or injury

• Test alternatives quickly without risk

• Eliminate the expense of actual shop floor programming/testing

• Employ either a physical or virtual PLC during simulations

• Use a physical human machine interface (HMI) control panel connected to a PLC or a virtualcontrol panel during simulations

DELMIA Automation - CSM Module & Block Editor 1 AOP (5674-LB1)

The CSM Module & Block Editor supplies tools for creating and editing modules and blocks."Modules" provide users with the mechanism to organize their projects, and "blocks" contain theinternal logic that describes the desired behavior based on inputs and outputs.



A module contains type, function, constants, blocks, and modules. The module editor allows theuser to compose an application independent of system and sub-system behavior and to storethese modules in a library.

A block has an interface or signature composed of communication ports. It is an executableentity that can communicate with other block instances or with the block where it is declared.The block editor allows the user to structure an application in element and sub-element levels tocreate a hierarchy of block instances. Block mapping is simplified with structured ports.

DELMIA Automation - HMI Control Panel Design 1 AOP (5674-HP1)

DELMIA Automation - HMI Control Panel Design provides an interface for creating a 2Drepresentation of a control panel or HMI Human Machine Interface (HMI). HMI Control PanelDesign includes tools for automatically creating various types of buttons, switches, lights,and gauges. Internal logic for each component placed on the control panel is automaticallygenerated. This virtual control panel can incorporate any number of buttons, switches, lightindicators, and gauges along with their default values and internal logic.

The newly designed control panel can be saved to a library for immediate use or reuse in theSmartDevice Builder or the Controlled System Simulator for interactive use during control logicdesign, debugging validation, and simulation.

DELMIA - DPM Structure Lofting 2 AOP (5674-DST)

DELMIA - DPM Structure Lofting takes the manufacturing bill of materials (MBOM) output fromAssembly Process Planner as input and allows the user to complete the lofting job, starting fromthe generation of lofting processes, creation of in-process models, and creation of manufacturingfeatures and workshop documents. Manufacturing preparation can also be done for structureparts. The manufacturing data created is stored in the Manufacturing Hub.

Users working in the PLM environment can easily change and update structure operationsand manufacturing features and subsequently workshop documents, greatly reducing the timebetween design change and notification to all process planners and lofters involved.

DELMIA - Electrical 3D Design & Documentation 1 AOP (5674-MEC)

DELMIA - Electrical 3D Design and Documentation 1 delivers a powerful and dedicated 3Dharness design and documentation toolset to the fabrication and assembly and consumer goodsmarkets. Based on functional specifications imported from schematic systems, the user caneasily define the electrical system in the 3D digital mockup. From the electrical system, theuser can go on to easily generate harness manufacturing documentation. This new end-to-endproduct enables the user to reduce the time and cost of creating electrical systems, both in themock up to avoid interferences and to create up-to-date manufacturing documentation.

Integration with schematic data insures that the physical 3D design is compliant with electricalspecifications and allows the automatic computation of wire length so that manufacturing can bestarted without a physical mock up as well as generating the correct harness diameter based onthe wire content of the bundle.

DELMIA - Electrical 3D Design & Documentation 1 takes full advantage of its integration withDELMIA mechanical assembly to improve productivity by allowing users to automatically updateelectrical wiring data. Accurate definition of 3D electrical systems guarantees that all installationconstraints, such as clashes, are solved in the digital mock up, providing significant productivitygains by eliminating the need for a physical mock up.

All design changes in the 3D harness are automatically propagated in the documentation,guaranteeing accuracy while improving productivity. Full integration with DELMIA 2D draftingalso enables the user to generate a dedicated representation of electrical components in 2D.

DELMIA - Generative Part Structural Analysis 2 (5674-MGS)

DELMIA - Generative Part Structural Analysis 2 integrates advanced pre-processing, solvingand post-processing capabilities. It allows designers to perform associative part stress andvibration analysis, including contact analysis, for the assessment of part mechanical behavior.The association of analysis specifications, such as loads and restraints, with the design ensuresusers can work quickly and consistently and can size and validate their designs early in the



development cycle, saving time and improving quality. Structural analysis can be performed onvolume parts, surface parts, and wireframe geometries. Users get a transparent and automatedapproach to part stress analysis and modal frequencies analysis in a very intuitive environment.

DELMIA - Generative Part Structural Analysis 2 supports local refinement of stress computationswith adaptive techniques. This is the core application of the analysis product line and the entrypoint to a scalable and integrated set of tools, including advanced options for specialists.

Withdrawn product

The DELMIA - Production System Simulation 2 (5674-PSS) AOP is withdrawn effectiveSeptember 23, 2008. There is no replacement product.

Process Planning

New product

DELMIA - Work Instruction Composer (5671-WKC)

DELMIA - Work Instruction Composer provides an intuitive, easy-to-use interface for authoringand viewing 3D work instructions. When authored in a maximum configuration, DELMIA WorkInstruction Composer radically reduces the total number of work instructions authored becausecommon work instructions are shared across all units. Instruction reuse reduces the cost ofcreating and managing such instructions and helps to ensure work instruction accuracy.

Work Instruction Composer requires minimal effort to incorporate design-driven ormanufacturing-driven changes into the pre-existing work instruction dataset and provides thecapability to send those work instructions to a manufacturing execution system (MES) forviewing on the shop floor. Work Instruction Composer also allows the capture of surroundingreference geometry with the planning context for each process plan.

Renamed products

The former DELMIA - 2D Layout Planning Product is now the DELMIA - Layout PlanningProduct. The product identifier remains 5671-L2P. Similarly, the former DELMIA - 3D LayoutPlanning Product is now the DELMIA - Layout Viewer. The product identifier remains L3P. Thisproduct is included in configurations only.

Education support

Schedules and enrollment

Call the IBM PLM North America (PLM/NA) response line at 800-395-3339 for schedules andenrollments.

Technical information

Specified operating environment

Hardware requirements

Summary of DELMIA V5.19 recommended configurations

• Oracle server - Any hardware and operating system platform as certified by Oracle

• Manufacturing Hub server

– Hardware - Any certified server with a 64-bit CPU (Intel® EM64T)

– Operating system - Microsoft Windows Server 2003 R2 SP2 (32 bit)

• DELMIA clients

– Hardware - Any certified workstation with a 64-bit CPU (Intel EM64T)

– Operating system



Microsoft Windows XP Professional SP2 (32 bit)Microsoft Windows XP Professional x64 SP2 (64 bit)

A complete list of certified combinations of hardware and software platforms can be found at

http://www.3ds.com/support/workstations-peripherals/

Hardware requirements for DELMIA Process Detailing and Validation

The following requirements are common to all operating systems supported by this release.Platform-specific requirements are specified in subsequent topics.

• Required components and features

– Disk drive: An internal or external disk drive (minimum recommended size is 80 GB) isrequired to store program executables, program data, the user environment, and to supplypaging space. Installation of all DELMIA Process Detailing and Validation products requires2.0 GB on Microsoft Windows, 2.4 GB on AIX, 2.7 GB on HP-UX, and 2.3 GB on Solaris.

– Memory: 1024 MB of RAM is the minimum recommended for all applications. 2048 MB ofRAM is recommended for large manufacturing models. Requirements may be greater whenlarge amounts of data are used.

– Internal/external drives: A CD-ROM drive is required for program installation and for accessto the online documentation, which can optionally be downloaded to disk.

– Display: A graphics color display compatible with the selected platform-specificgraphics adapter. The minimum recommended size for usability reasons is 17 inches.Minimum resolution for Windows workstations is 1024 x 768 and 1280 x 1024 for UNIX®workstations. When selecting a graphics adapter, hardware texturing capability is stronglyrecommended when using products that employ texture mapping, in which case the amountof texture RAM has to be adequate for the number and complexity of textures to be used.

– Keyboard: A specific keyboard compatible with the selected installation locale may berequired for national language support.

– Pointing device: Three-button mouse. On Microsoft Windows workstations, a two-button mouse may alternatively be used (the third button is emulated with a keyboardsequence). The three-button mouse is recommended for usability reasons. IntelliMouse(two buttons plus a wheel instead of the third button) is an alternative to the three-buttonmouse on Windows workstations. The wheel acts as the middle button to allow additionalmanipulations, such as panning and scrolling.

• Optional components and features: For Platform 2 (P2) products, SpaceBall orSpaceMouse, in addition to the standard mouse, can be used to perform graphicmanipulations (zoom, pan, and rotate). The required drivers are delivered with these devices.Support of these devices is also available with the DMU Navigator 1 (5674-MDU) Add-onProduct.

The robustness of the overall solution is dependent on the robustness of the operating systemand the hardware environment used. Configurations certified by Dassault Systemes for runningDELMIA Version 5 are published at


Although DELMIA Version 5 products might run on configurations or with graphic adapters otherthan those specified for each of the following platforms, incidents specific to such configurationsor adapters will not be accepted for support.

Microsoft Windows XP 32 bit

• System unit: An Intel Pentium® 4 or Xeon® based workstation running Microsoft WindowsXP Professional Edition SP2.

• Graphics adapter: A graphics adapter with a 3D OpenGL accelerator is required.

Note: Graphics performance on local transformations (panning, zooming, and rotating model)will depend on the selected graphics adapter. The graphics adapter should have the followingcapabilities:

– 24 bits, true color, double buffered visual.

– 24 bits, Z-buffer.





– Stencil buffer.

– Minimum supported resolution: 1024 x 768. A resolution of 1280 x 1024 is recommendedfor usability reasons.

• Network adapter: An active LAN adapter (Ethernet or Token Ring, installed and configured)is required for license key purposes.

Microsoft Windows x86 64 bit

• System unit: An Intel Xeon EM64T or AMD Opteron 64-bit based workstation runningMicrosoft Windows XP Professional x64 Edition.

• Memory: 4 GB is the recommended minimum.

• Disk drive: 40 GB is the recommended minimum.

• Graphics adapter: A graphics adapter with a 3D OpenGL accelerator is required.

Note: Graphics performance on local transformations (panning, zooming, rotating model) willdepend on the selected graphics adapter. The graphics adapter should have the followingcapabilities:

– 24 bits, true color, double buffered visual.

– 24 bits, Z-buffer.

– Stencil buffer.

– Minimum supported resolution: 1024 x 768. A resolution of 1280 x 1024 is recommendedfor usability reasons.

• Network adapter: An active LAN adapter (Ethernet or token ring, installed and configured) isrequired for license key purposes.

IBM AIX

• System unit: Any RS/6000®, based on the POWER4™, POWER5™, Power PC-970processor families, supported on AIX V5.3

• Graphics adapter: One of the following graphics adapters is required.

– GXT500P

– GXT550P

– GXT800P

– GXT800M

– GXT2000P

– GXT3000P

– GXT4000P

– GXT4500P

– GXT6000P

– GXT6500P

HP-UX

• System unit: Any B-Class, C-Class, or J-Class workstation based on the PA8000, PA8800,and PA8900 processor family and supported on HP-UX 11iv1.

• Graphics adapter: One of the following graphics adapters is required:

– Visualize-FXE

– Visualize-FX2

– Visualize-FX4

– Visualize-FX5

– Visualize-FX6

– Visualize-FX10

– Fire GL-UX

– Fire GL T2-128

– Fire GL X1



– Fire GL X3

Sun Solaris

• System unit: Any Ultra1, Ultra2, Ultra10, Ultra30, Ultra60, Sun Blade 100, Sun Blade 150,Sun Blade 1000, Sun Blade 1500, Sun Blade 1500+ (1.5 GHz), Sun Blade 2000, or SunBlade2500 workstation based on the UltraSPARC processor supported on Solaris 10.

• Graphics adapter: One of the following graphics adapters is required.

– Creator3D

– Creator3D Series III

– Elite 3D (U10-440MHz only for U10 workstations)

– Elite 3D Lite

– Expert 3D

– XVR-500

– XVR-600

– XVR-1000

– XVR-1200

Hardware requirements for Manufacturing Hub Server

Any Microsoft Windows Server 2003 platform as certified by Microsoft.

Hardware requirements for DELMIA Process Planning clients

• Processor: Intel Pentium-4, minimum 2400 MHz.

• Disk drive: Minimum of 1024 MB; 2048 MB to install a client, server, and an Oracle server onthe same machine.

• Graphical interface: 1024 x 768 OpenGL with a minimum of 32 MB onboard memory.

• Network connection: LAN (completely configured).

• Communication protocol: TCP/IP. The machine must have an IP address (either static or viaDHCP)

Software requirements

Software requirements for DELMIA Process Detailing and Validation

Summary of changes for V5.19

• Minimum run-time support for IBM AIX running on POWER4 or POWER5 processors for both32 bit and 64 bit is provided by AIX V5.3 Technical Level 05 SP 3.

• Minimum run-time support for HP-UX Run-time is HP-UX 11iv1 (11.11) December, 2004 (on32 bit only).

• Minimum run-time support on Sun Solaris SPARC is Solaris 10 SPARC. The minimum levelrequired is Solaris 10 HW 03/05 with 119280-06 CDE 1.6 - Runtime library patch for Solaris10.

• The required level for document browsers in a UNIX environment is Mozilla 1.7 for AIX, HP-UX, and Solaris and Firefox 2.0 for Sun Solaris SPARC.

• The required level for document browsers in a Microsoft(R) Windows(R) environment isMicrosoft Internet Explorer 7.0.

• The required level for JRE is 1.6.2 for all operating systems.

Note: DELMIA V5.19 is the last release to support HP-UX.

Common software requirements

DELMIA Process Detailing and Validation runs on selected levels of:

• Microsoft Windows 32 bit: Windows XP Professional and Windows Vista x86

• Microsoft Windows 64 bit: Windows XP Professional x64 and Windows Visa x64

• IBM AIX



• Hewlett Packard HP-UX 11iv1

• Sun Solaris SPARC

Refer to the Program Directory or contact your IBM Support Center for appropriate correctiveservice to apply to the software described below.

Software requirements for Microsoft Windows XP Professional Edition SP2

Windows XP delivers an implementation of OpenGL libraries. These drivers may offer a DELMIAapplication setting (see Control Panel, Display Properties tabs), which should be selected whenavailable, as they may contain application-specific features. For recommendations related todriver levels based on certified configurations, visit


A localized version of the operating system may be required when the selected installation localediffers from Latin 1.

The following software is also required:

• Microsoft Internet Explorer 7

• Sun JRE Version 6 Update 2

• Microsoft .NET Framework Version 3.0 Redistributable Package

Software requirements for Microsoft Windows Vista Enterprise Edition

(32 bit)

In addition to the operating system, the following software is also required:



• Microsoft .NET Framework Version 3.0 Redistributable Package

Software requirements for Microsoft Windows XP Professional x64

Edition SP2

Windows XP Professional x64 Edition delivers an implementation of OpenGL libraries. Thesedrivers may offer a DELMIA application setting (see Control Panel, Display Properties tabs),which should be selected when available, as they may contain application-specific features. Forrecommendations related to driver levels based on certified configurations, visit


The following software is also required:



Software requirements for Microsoft Windows Vista x64 Enterprise

Edition (64 bit)

In addition to the operating system, the following software is required:



Software requirements for IBM AIX 32-bit and 64-bit platforms

AIX 5.3 Technical Level 05 SP 3 (using 64-bit kernel), with the following components:

• XL C/C++ Enterprise Edition V8.0.0 Run-time Environment





– April, 2007 IBM C++ Runtime Environment Component for AIX

– Fileset x1C.aix50.rte at level 8.0.0.

• XL Fortran Enterprise Edition V10.1.0 for AIX Runtime

– August 2006 XL Fortran V10.1 for AIX Runtime

– Fileset xlfrte.aix51 at level 10.1.0.2

• OpenGL 1.3 as delivered on AIX CDs

• Mozilla 1.7 browser

• IBM JRE V5 SR6

• IBM Java(R) Plug-In V5 SR6

Software requirements for HP-UX

Note: HP-UX will not be supported in any future DELMIA Version 5 release.

• HP-UX Version 11iv1 (11.11) (December 2004) with the following components:

– HP-UX Technical Computing OE (TCOE) Component December 2004

– Mozilla 1.7

– HP-UX JRE 5.0.10

– HP-UX Java™ Plug-In 5.0.10

• HP-UX Version 11iv1 (11.11) (June 2007) with the following components:

– HP-UX Technical Computing OE (TCOE) Component December 2006

– Mozilla 1.7

– HP-UX JRE 5.0.10

– HP-UX Java Plug-In 5.0.10

Software requirements for Sun Solaris

Sun Solaris 10 H/W 03/05, with:

• Firefox 2.0


• Sun Java Plug-In Version 6 Update 4

DELMIA Process Detailing and Validation general packaging principles

• A DELMIA P1 product or a DELMIA P1 configuration requires or must include (in the case ofconfigurations) DELMIA - Object Manager 1 (DO1). P1 products can be used on P2, and insuch cases, they operate with DELMIA - Object Manager 2 (DOM).

• A DELMIA P2 product or a DELMIA P2 configuration requires or must include (in the case ofconfigurations), DELMIA - Object Manager 2 (DOM).

• License keys for configurations are acquired and released for the total configuration.

• The functions within a configuration cannot be shared.

• A configuration is required for each DELMIA seat.

• DELMIA add-on and shareable products may require prerequisite products that are notincluded in a standard purchased configuration. When a prerequisite product is not includedin the selected standard configuration, both the AOP and its prerequisite products mustbe purchased and included as AOPs within a custom configuration. Prerequisites forshareable products can be satisfied by a standard configuration, by an AOP within a customconfiguration, or by a shareable product.

Macro replay capabilities

DELMIA has built-in macro record and replay capabilities. For UNIX, the interpreter is VB Script3.0 from Mainsoft. Its components are included as shared libraries. For Microsoft Windows, theinterpreter is Microsoft Visual Basic for Applications (VBA) at a minimum level of 6.0. VBA isdelivered and installed by default with DELMIA Process Detailing and Validation.



Printer and plotter support

• UNIX - DELMIA Process Detailing and Validation supports the following plotter/printerlanguages:

– CGM-ISO, ATA, CALS

– Hewlett Packard HP-GL/2-RTL and HP-GL or IBM-GL subsets

– OCE Graphics GPR50: VDF plotting routines

– PostScript®

• Microsoft Windows - Printers and plotters are supported through the vendor's drivers for thetargeted printer or plotter relative to the targeted version of the operating system. Contact theprinter or plotter vendor for requirements and support.

Software requirements for DELMIA Process Planning

ENOVIA Manufacturing Hub server

The Manufacturing Hub server is certified on the following operating systems:

• Microsoft Windows Server 2003 Standard Edition Service Pack 2 (32 bit)

• Microsoft Windows Server 2003 Enterprise Edition Service Pack 2 (32 bit)

• Microsoft Windows Server 2003 Standard Edition R2 Service Pack 2 (32 bit)

• Microsoft Windows Server 2003 Enterprise Edition R2 Service Pack 2 (32 bit)

DELMIA Process Planning clients

Process Engineer clients are certified on the following operating systems:

• Microsoft Windows XP Professional Service Pack 2 (32 bit)

• Microsoft Windows XP Professional x64 Service Pack 2 (64 bit)

• Microsoft Windows Vista Enterprise x86 (32 bit)

• Microsoft Windows Vista Enterprise x64 (64 bit)

Certified third-party software (Windows-based)

• Oracle database - Oracle 10.2.0.2, or later is a prerequisite for the Manufacturing Hub server.

• Java is a prerequisite for:

– The Manufacturing Hub server

– Single Sign-On (SSO) on Process Planning clients

– Manufacturing Hub integration and SSO on Process Detailing and Validation (32 bit and 64bit)

– The required Java level is:

-- For Windows 32 bit - Sun JRE Version 6.0 Update 2

-- For Windows 64 bit - Sun JRE Version 6.0 Update 2 x64

– Microsoft Visual J# V2.0 and Microsoft .NET Framework 3.0 is a prerequisite for SSO andWeb Services for the Manufacturing Hub, and for SSO on Process Planning and ProcessDetailing and Validation clients.

– FlexLM Version 9.5 is a prerequisite for the licensing environment for the ManufacturingHub server and Process Planning clients.

– Microsoft Office Excel 2003 is a prerequisite for script-based reporting on Process Planningclients and for DPM Work Instructions on Process Detailing and Validation clients (32 bitand 64 bit).

– Microsoft Internet Explorer 7 is a prerequisite for ErgoCheck on Process Planning clientsand for documentation on Process Detailing and Validation clients (32 bit and 64 bit).

• Notes:

– For 64-bit SSO, only JRE is supported. For 32-bit SSO, either JRE or J# with .NET can bechosen.

– WebServices is required for Change Management with ENOVIA VPM V5 (LCA)Engineering Hub.



– For the Java Runtime Environment on Windows XP, the environment variable JAVA_HOMEhas to be set on the Process Planning server to establish communication between it andProcess Planning clients.

– To obtain the .NET Framework 3.0 redistributable, go to

http://www.microsoft.com/downloads

Database-related prerequisites

Oracle RDBMS Server Standard Edition or Enterprise Edition Version 10.2.0.2, or later isrequired to store data on the Manufacturing Hub server.

Access to product information

Product information is delivered with the product CDs in HTML format. An HTML browser isrequired to access this documentation. Online documentation may be installed and used only inthe same supported operating environments as DELMIA Process Detailing and Validation.

• In a UNIX environment

For AIX and HP-UX - Mozilla 1.7For Sun Solaris - Firefox 2.0

• In a Microsoft Windows environment, one of the following browsers is required:

Microsoft Internet Explorer 7.0Firefox 2.0

In addition to a Java-enabled Web browser, the Java Plug-in at level 1.5 to search onlinedocumentation:

• For AIX, Java Runtime Environment version Java 1.5.0 SR6 can be downloaded from

http://www.ibm.com/developerworks/java/jdk/aix/service.html• For HP-UX, Java Runtime Environment 5.0.10 can be downloaded from

http://www.hp.com/go/java• For Sun Solaris, Java Runtime Environment Version 6, Update 4 can be downloaded from

http://java.sun.com/products/archive/index.html• For Microsoft Windows, Java plug-in Version 6 Update 2 can be downloaded from

http://java.sun.com/products/archive/index.html

Although access to the online documentation might work on other HTML browsers, incidentsspecific to browsers other than those specified are not eligible for support.

Prerequisites for the license management environment

Process Detailing and Validation

Process Detailing and Validation applications must have an active LAN card (Ethernet or tokenring) and TCP/IP installed and properly configured, even in the case of nodelock keys, thoughfor nodelock there is no need to have the workstations connected to the network. No additionallicense management software is required when accessing nodelock license keys.

IBM License Use Management (LUM) is required to serve concurrent license keys acrossa network. A LUM configuration file (i4ls.ini) is required on DELMIA Process Detailing andValidation clients to access concurrent license keys from these servers. Server and Nodelocklicense management mechanisms are available on all supported operating environments.

IBM LUM level V4.6.8.3 is the minimum level.

The latest release of IBM LUM V4, together with any applicable patches, can be downloaded atno charge from

http://www.ibm.com/software/awdtools/lum/

http://www.microsoft.com/downloads

http://www.ibm.com/developerworks/java/jdk/aix/service.html

http://www.hp.com/go/java



http://www.ibm.com/software/awdtools/lum/



Access to the downloads requires an IBM ID, which can be created at no cost when firstrequesting a download.

Process Planning

Process Planning applications require FlexLM 8.3b on the Manufacturing Hub server andProcess Planning clients.

FlexLM technical information can be found at:

http://www.macrovision.com/pdfs/ flexlm_licensing_end_user_guide.pdf

Planning information

PackagingDeliverable Form number

Process Detailing and Validation code and LCD4-7892 program directory (16 CDs)Process Detailing and Validation English SK4T-3605 online documentation (2 CDs)Process Planning code,program directory, and LCD7-2698* English documentation (3 CDs)MULTICAx code and program directory (7 CDs) LCD4-7893**LUM 4.6.8 with patch 4.6.8.3 (1 CD) LCD4-7885Licensed Program Specification GI11-6422Process Detailing and Validation Registration GI11-4404 MemoProcess Planning Registration Memo GI11-6441 * Ships only with an order for one or more of the Process Planning products.** Ships only with an order for one or more of the MULTICAx products.

Security, auditability, and control

The announced programs use the security and auditability features of the operating systemssoftware. The customer is responsible for evaluation, selection, and implementation of securityfeatures, administrative procedures, and appropriate controls in application systems andcommunication facilities.

Ordering information

Current licensees

Current licensees will receive this update from IBM Software Delivery and Fulfillmentautomatically.

Should you require further assistance, contact your country IBM representative.

Shipment of DELMIA V5.19 is scheduled to be completed by October 17, 2008.

New licensees

Orders for new licenses will be accepted now. For new licensees, shipment will begin on theplanned availability date.

An order for DELMIA Version 5 basic licensed programs consists of:

• A licensed standard configuration program order (5671-XXX or 5672-XXX)

• A licensed custom configuration (5672-XXX) with add-on products (AOPs) (5674-XXX)

• Optional licensed shareable product program order (5671-XXX or 5672-XXX)

http://www.macrovision.com/pdfs/flexlm_licensing_end_user_guide.pdf



• One system program order (SPO), 5628-DEL

The 5671-XXX, 5672-XXX, and 5674-XXX orders are required for billing and asset registration.The 5628-DEL orders are required to ship machine-readable materials and publications.

DELMIA Version 5 products are available only on CD-ROM.

Release summary

New DELMIA Process Detailing and Validation configurations


5672-CB2 DELMIA - Controlled Workcell Builder 25672-CW2 DELMIA - Controlled Workcell Validation 25672-FP2 DELMIA - Robotics Paint Foundation 2

New DELMIA Process Detailing and Validation add-on products (AOPs)

Program number Program name 5674-DLD DELMIA Automation - CLM Device Logic Design 25674-FB1 DELMIA Automation - CLM FBD Editor 15674-LL1 DELMIA Automation - CLM Ladder Logic Editor 15674-DC1 DELMIA Automation - CSM Device Control Connection 15674-LB1 DELMIA Automation - CSM Module & Block Editor 15674-HP1 DELMIA Automation - HMI Control Panel Design 15674-DST DELMIA - DPM Structure Lofting 2*5674-MEC DELMIA - Electrical 3D Design & Documentation 15674-MGS DELMIA - Generative Part Structural Analysis 2*5674-MLM DELMIA - Lathe Machining 2*5674-MNC DELMIA - NC Manufacturing Review 2*5674-MPM DELMIA - Prismatic Machining 2*5674-PRM DELMIA - PPR Manufacturing Hub Navigator 2*

* Previously available only as included in a configuration. Refer to Software Announcement207-251, dated October 16, 2007.

Withdrawn DELMIA Process Detailing and Validation add-on products (AOPs)


5674-PSS DELMIA - Production System Simulation 2 AOP

New DELMIA Process Planning products



Renamed DELMIA Process Planning products

The following products are renamed as indicated. Product identifiers are unchanged.

Productidentifier Old name New name

5671-L2P DELMIA - 2D Layout Planning DELMIA - Layout Planning DELMIA - 3D Layout Planning DELMIA - Layout Viewer (included-only product)

Product ordering

The ShopPLM configurator must be used to submit all CBS orders. For information on theShopPLM configurator, visit

https://steamboat.boulder.ibm.com/webapp/shopplm/landing.wss

Access to this site requires an IBM user ID and password, which can be obtained at no charge.


https://steamboat.boulder.ibm.com/webapp/shopplm/landing.wss



The following tier levels apply for all configurations and products in this announcement:

• Recurring license

ALC or RLC User 1-9ALC or RLC User 10-25ALC or RLC User 26+

• Variable term license

YLC User 1-9YLC User 10-25YLC User 26+

Process Detailing & Validation configurations

5672-CB2 DELMIA - Controlled Workcell Builder 2 Configuration

Entitlement License Pricingentity Description option metric

S015582 CB2 Config Primary License Lic to Use PLC per UserS01559T CB2 Config Recurring License Basic ALC per UserS015599 CB2 Config Variable Term Lic Basic YLC per User

5672-CW2 DELMIA - Controlled Workcell Validation 2 Configuration


S0155C4 CW2 Config Primary License Lic to Use PLC per UserS0155C0 CW2 Config Recurring License Basic ALC per UserS0155BT CW2 Config Variable Term Lic Basic YLC per User

5672-FP2 DELMIA - Robotics Paint Foundation 2 Configuration


S0155FV FP2 Config Primary License Lic to Use PLC per UserS0155FH FP2 Config Recurring License Basic ALC per UserS0155G9 FP2 Config Variable Term Lic Basic YLC per User

Process Detailing & Validation add-on products

5674-DC1 DELMIA Automation - CSM Device Control Connection 1 Add-on Product


S0155H6 DC1 AOP Primary License Lic to Use PLC per UserS0155H7 DC1 AOP Recurring License Basic ALC per UserS0155H2 DC1 AOP Variable Term Lic Basic YLC per User

5674-DLD DELMIA Automation - CLM Device Logic Design 2 Add-on Product


S0155HD DLD AOP Primary License Lic to Use PLC per UserS0155HC DLD AOP Recurring License Basic ALC per UserS0155HL DLD AOP Variable Term Lic Basic YLC per User

5674-DST DELMIA - DPM Structure Lofting 2 Add-on Product


S0155HT DST AOP Primary License Lic to Use PLC per UserS0155HP DST AOP Recurring License Basic ALC per UserS0155HV DST AOP Variable Term Lic Basic YLC per User

5674-FB1 DELMIA Automation - CLM FBD Editor 1 Add-on Product


S0155J3 FB1 AOP Primary License Lic to Use PLC per User



S0155J7 FB1 AOP Recurring License Basic ALC per UserS0155J4 FB1 AOP Variable Term Lic Basic YLC per User

5674-HP1 DELMIA Automation - HMI Control Panel Design 1 Add-on Product


S0155JC HP1 AOP Primary License Lic to Use PLC per UserS0155J9 HP1 AOP Recurring License Basic ALC per UserS0155JB HP1 AOP Variable Term Lic Basic YLC per User

5674-LB1 DELMIA Automation - CSM Module & Block Editor 1 Add-on Product


S0155JV LB1 AOP Primary License Lic to Use PLC per UserS0155JN LB1 AOP Recurring License Basic ALC per UserS0155JS LB1 AOP Variable Term Lic Basic YLC per User

5674-LL1 DELMIA Automation - CLM Ladder Logic Editor 1 Add-on Product


S0155K5 LL1 AOP Primary License Lic to Use PLC per UserS0155JZ LL1 AOP Recurring License Basic ALC per UserS0155K3 LL1 AOP Variable Term Lic Basic YLC per User

5674-MEC DELMIA - Electrical 3D Design & Documentation 1 Add-on Product


S0155K9 MEC AOP Primary License Lic to Use PLC per UserS0155K8 MEC AOP Recurring License Basic ALC per UserS0155KC MEC AOP Variable Term Lic Basic YLC per User

5674-MGS DELMIA - Generative Part Structure Analysis 2 Add-on Product


S015623 MGS AOP Primary License Lic to Use PLC per UserS015620 MGS AOP Recurring License Basic ALC per UserS015622 MGS AOP Variable Term Lic Basic YLC per User

5674-MLM DELMIA - Lathe Machining 2 Add-on Product


S015629 MLM AOP Primary License Lic to Use PLC per UserS015626 MLM AOP Recurring License Basic ALC per UserS015627 MLM AOP Variable Term Lic Basic YLC per User

5674-MNC DELMIA - NC Manufacturing Review 2 Add-on Product


S01562D MNC AOP Primary License Lic to Use PLC per UserS01562F MNC AOP Recurring License Basic ALC per UserS01562H MNC AOP Variable Term Lic Basic YLC per User

5674-MPM DELMIA - Prismatic Machining 2 Add-on Product


S01562P MPM AOP Primary License Lic to Use PLC per UserS01562K MPM AOP Recurring License Basic ALC per UserS01562L MPM AOP Variable Term Lic Basic YLC per User

5674-PRM DELMIA - PPR Manufacturing Hub Navigator 2 Add-on Product


S01562V PRM AOP Primary License Lic to Use PLC per User



S01562T PRM AOP Recurring License Basic ALC per UserS01562X PRM AOP Variable Term Lic Basic YLC per User

Process Planning product



S0155KV WKC Prod Primary License Lic to Use PLC per UserS0155L2 WKC Prod Recurring License Basic ALC per UserS0155L1 WKC Prod Variable Term Lic Basic YLC per User

Process Detailing and Validation non-billable AOP indicator codes

No-charge indicator codes are set up under each of the 5672 configurations for which the AOP isavailable.

5672-AP2 DELMIA - DPM Assembly 2 Configuration


S0157DT 5674-DST AOP Indicator Code AOP Registration No ChgS0155W0 5674-GSM AOP Indicator Code AOP Registration No ChgS0155W1 5674-MGS AOP Indicator Code AOP Registration No ChgS0155W2 5674-MNC AOP Indicator Code AOP Registration No Chg

5672-BP2 DELMIA - DPM Body In White 2 Configuration


S0157DV 5674-DST AOP Indicator Code AOP Registration No ChgS0155W3 5674-GSM AOP Indicator Code AOP Registration No ChgS0155W4 5674-MGS AOP Indicator Code AOP Registration No ChgS0155W5 5674-MNC AOP Indicator Code AOP Registration No Chg

5672-BX2 DELMIA - DPM Body In White XT 2 Configuration


S0155W6 5674-DC1 AOP Indicator Code AOP Registration No ChgS0155W7 5674-DHR AOP Indicator Code AOP Registration No ChgS0155W8 5674-DLD AOP Indicator Code AOP Registration No ChgS0157DW 5674-DST AOP Indicator Code AOP Registration No ChgS0155W9 5674-FB1 AOP Indicator Code AOP Registration No ChgS0155WB 5674-GSM AOP Indicator Code AOP Registration No ChgS0155WC 5674-HP1 AOP Indicator Code AOP Registration No ChgS0155WD 5674-LB1 AOP Indicator Code AOP Registration No ChgS0155WF 5674-LL1 AOP Indicator Code AOP Registration No ChgS0155WG 5674-MEC AOP Indicator Code AOP Registration No ChgS0155WH 5674-MGS AOP Indicator Code AOP Registration No ChgS0155WJ 5674-MNC AOP Indicator Code AOP Registration No Chg

5672-CB2 DELMIA - Controlled Workcell Builder 2 Configuration


S01557P 5674-APN AOP Indicator Code AOP Registration No ChgS01558R 5674-APS AOP Indicator Code AOP Registration No ChgS01558V 5674-ARW AOP Indicator Code AOP Registration No ChgS01558Z 5674-BWP AOP Indicator Code AOP Registration No ChgS0157DX 5674-DST AOP Indicator Code AOP Registration No ChgS01558L 5674-EIP AOP Indicator Code AOP Registration No ChgS01557X 5674-GSM AOP Indicator Code AOP Registration No ChgS01557N 5674-HP1 AOP Indicator Code AOP Registration No ChgS01559H 5674-IDP AOP Indicator Code AOP Registration No ChgS01557W 5674-LL1 AOP Indicator Code AOP Registration No ChgS015589 5674-MAP AOP Indicator Code AOP Registration No ChgS01558H 5674-MAS AOP Indicator Code AOP Registration No ChgS015590 5674-MEC AOP Indicator Code AOP Registration No ChgS01558K 5674-MEP AOP Indicator Code AOP Registration No Chg



S01558T 5674-MEQ AOP Indicator Code AOP Registration No ChgS01559C 5674-MFR AOP Indicator Code AOP Registration No ChgS01558B 5674-MFT AOP Indicator Code AOP Registration No ChgS01559N 5674-MG1 AOP Indicator Code AOP Registration No ChgS01559R 5674-MGD AOP Indicator Code AOP Registration No ChgS01558C 5674-MGP AOP Indicator Code AOP Registration No ChgS01559K 5674-MGS AOP Indicator Code AOP Registration No ChgS01559X 5674-MHA AOP Indicator Code AOP Registration No ChgS01557V 5674-MHB AOP Indicator Code AOP Registration No ChgS01558J 5674-MHC AOP Indicator Code AOP Registration No ChgS01559M 5674-MHM AOP Indicator Code AOP Registration No ChgS01557T 5674-MHP AOP Indicator Code AOP Registration No ChgS015594 5674-MHT AOP Indicator Code AOP Registration No ChgS015597 5674-MID AOP Indicator Code AOP Registration No ChgS01558D 5674-MIG AOP Indicator Code AOP Registration No ChgS015596 5674-MK1 AOP Indicator Code AOP Registration No ChgS01559W 5674-MKE AOP Indicator Code AOP Registration No ChgS01558F 5674-MNC AOP Indicator Code AOP Registration No ChgS015598 5674-MNV AOP Indicator Code AOP Registration No ChgS01557K 5674-MOP AOP Indicator Code AOP Registration No ChgS015595 5674-MRR AOP Indicator Code AOP Registration No ChgS01559G 5674-MRT AOP Indicator Code AOP Registration No ChgS01558M 5674-MSP AOP Indicator Code AOP Registration No ChgS01559S 5674-MST AOP Indicator Code AOP Registration No ChgS01559L 5674-MTP AOP Indicator Code AOP Registration No ChgS01559J 5674-MTR AOP Indicator Code AOP Registration No ChgS01557Z 5674-MWS AOP Indicator Code AOP Registration No ChgS01559P 5674-OLP AOP Indicator Code AOP Registration No ChgS015585 5674-PCR AOP Indicator Code AOP Registration No ChgS015592 5674-PDP AOP Indicator Code AOP Registration No ChgS01557S 5674-PRL AOP Indicator Code AOP Registration No ChgS015587 5674-PRR AOP Indicator Code AOP Registration No ChgS01557R 5674-PSY AOP Indicator Code AOP Registration No ChgS01558P 5674-RRS AOP Indicator Code AOP Registration No ChgS01559B 5674-SHF AOP Indicator Code AOP Registration No ChgS01557L 5674-SOR AOP Indicator Code AOP Registration No ChgS01557M 5674-SPR AOP Indicator Code AOP Registration No ChgS015583 5674-TSA AOP Indicator Code AOP Registration No ChgS015581 5674-UDP AOP Indicator Code AOP Registration No ChgS01559V 5674-WKI AOP Indicator Code AOP Registration No Chg

5672-CW2 DELMIA - Controlled Workcell Validation 2 Configuration


S0155BX 5674-APN AOP Indicator Code AOP Registration No ChgS0155D8 5674-APS AOP Indicator Code AOP Registration No ChgS0155D6 5674-BWP AOP Indicator Code AOP Registration No ChgS0155BS 5674-DBG AOP Indicator Code AOP Registration No ChgS0155C5 5674-DLD AOP Indicator Code AOP Registration No ChgS0155BZ 5674-EIP AOP Indicator Code AOP Registration No ChgS0155C8 5674-FB1 AOP Indicator Code AOP Registration No ChgS0155CL 5674-GSM AOP Indicator Code AOP Registration No ChgS0155B3 5674-HP1 AOP Indicator Code AOP Registration No ChgS0155BL 5674-IDP AOP Indicator Code AOP Registration No ChgS0155DH 5674-LB1 AOP Indicator Code AOP Registration No ChgS0155C9 5674-LE1 AOP Indicator Code AOP Registration No ChgS0155DD 5674-LL1 AOP Indicator Code AOP Registration No ChgS0155BC 5674-MAP AOP Indicator Code AOP Registration No ChgS0155DG 5674-MAS AOP Indicator Code AOP Registration No ChgS0155CX 5674-MEC AOP Indicator Code AOP Registration No ChgS0155BM 5674-MEP AOP Indicator Code AOP Registration No ChgS0155B6 5674-MEQ AOP Indicator Code AOP Registration No ChgS0155BK 5674-MFR AOP Indicator Code AOP Registration No ChgS0155CB 5674-MFT AOP Indicator Code AOP Registration No ChgS0155CZ 5674-MGP AOP Indicator Code AOP Registration No ChgS0155CC 5674-MGS AOP Indicator Code AOP Registration No ChgS0155BG 5674-MHA AOP Indicator Code AOP Registration No ChgS0155BJ 5674-MHB AOP Indicator Code AOP Registration No ChgS0155C2 5674-MHC AOP Indicator Code AOP Registration No ChgS0155B7 5674-MHM AOP Indicator Code AOP Registration No ChgS0155D9 5674-MHP AOP Indicator Code AOP Registration No ChgS0155CW 5674-MHT AOP Indicator Code AOP Registration No Chg



S0155C7 5674-MID AOP Indicator Code AOP Registration No ChgS0155BR 5674-MIG AOP Indicator Code AOP Registration No ChgS0155C3 5674-MK1 AOP Indicator Code AOP Registration No ChgS0155B4 5674-MKE AOP Indicator Code AOP Registration No ChgS0155DB 5674-MNC AOP Indicator Code AOP Registration No ChgS0155DC 5674-MNV AOP Indicator Code AOP Registration No ChgS0155D3 5674-MOP AOP Indicator Code AOP Registration No ChgS0155BV 5674-MPD AOP Indicator Code AOP Registration No ChgS0155B5 5674-MRL AOP Indicator Code AOP Registration No ChgS0155BW 5674-MRR AOP Indicator Code AOP Registration No ChgS0155CD 5674-MRT AOP Indicator Code AOP Registration No ChgS0155CR 5674-MSD AOP Indicator Code AOP Registration No ChgS0155D2 5674-MSP AOP Indicator Code AOP Registration No ChgS0155BN 5674-MST AOP Indicator Code AOP Registration No ChgS0155BP 5674-MTP AOP Indicator Code AOP Registration No ChgS0155CM 5674-MTR AOP Indicator Code AOP Registration No ChgS0155CG 5674-MWS AOP Indicator Code AOP Registration No ChgS0155CT 5674-PCR AOP Indicator Code AOP Registration No ChgS0155CS 5674-PDP AOP Indicator Code AOP Registration No ChgS0155BD 5674-PLT AOP Indicator Code AOP Registration No ChgS0155D4 5674-PRL AOP Indicator Code AOP Registration No ChgS0155CJ 5674-PRR AOP Indicator Code AOP Registration No ChgS0155CV 5674-SHF AOP Indicator Code AOP Registration No ChgS0155B9 5674-SOR AOP Indicator Code AOP Registration No ChgS0155DF 5674-SPR AOP Indicator Code AOP Registration No ChgS0155BB 5674-UDP AOP Indicator Code AOP Registration No ChgS0155CN 5674-WKI AOP Indicator Code AOP Registration No ChgS0155CF 5674-WSQ AOP Indicator Code AOP Registration No ChgS0155D1 5674-WSU AOP Indicator Code AOP Registration No Chg

5672-DS2 DELMIA - DPM Structure 2 Configuration


S0155WK 5674-GSM AOP Indicator Code AOP Registration No ChgS0155WL 5674-MAS AOP Indicator Code AOP Registration No ChgS0155WM 5674-MGS AOP Indicator Code AOP Registration No ChgS0155WN 5674-MNC AOP Indicator Code AOP Registration No ChgS0155WP 5674-MPD AOP Indicator Code AOP Registration No ChgS0155WR 5674-MRT AOP Indicator Code AOP Registration No ChgS0155WS 5674-WSU AOP Indicator Code AOP Registration No Chg

5672-EA2 DELMIA - ENVISION Assembly 2 Configuration


S0157DZ 5674-DST AOP Indicator Code AOP Registration No ChgS0155WT 5674-GSM AOP Indicator Code AOP Registration No ChgS0155WV 5674-MEC AOP Indicator Code AOP Registration No ChgS0155WW 5674-MGS AOP Indicator Code AOP Registration No ChgS0155WX 5674-MNC AOP Indicator Code AOP Registration No Chg

5672-FP2 DELMIA - Robotics Paint Foundation 2 Configuration


S0155GC 5674-APN AOP Indicator Code AOP Registration No ChgS0155FP 5674-APS AOP Indicator Code AOP Registration No ChgS0155FN 5674-ARW AOP Indicator Code AOP Registration No ChgS0155F5 5674-BWP AOP Indicator Code AOP Registration No ChgS0157F0 5674-DST AOP Indicator Code AOP Registration No ChgS0155G4 5674-EIP AOP Indicator Code AOP Registration No ChgS0155DZ 5674-GSM AOP Indicator Code AOP Registration No ChgS0155FM 5674-HP1 AOP Indicator Code AOP Registration No ChgS0155DT 5674-IDP AOP Indicator Code AOP Registration No ChgS0155FX 5674-LE1 AOP Indicator Code AOP Registration No ChgS0155FS 5674-LS1 AOP Indicator Code AOP Registration No ChgS0155G7 5674-MAP AOP Indicator Code AOP Registration No ChgS0155FJ 5674-MEP AOP Indicator Code AOP Registration No ChgS0155DX 5674-MEQ AOP Indicator Code AOP Registration No ChgS0155FD 5674-MFR AOP Indicator Code AOP Registration No ChgS0155DV 5674-MFT AOP Indicator Code AOP Registration No ChgS0155FL 5674-MG1 AOP Indicator Code AOP Registration No Chg



S0155F8 5674-MGD AOP Indicator Code AOP Registration No ChgS0155H0 5674-MGP AOP Indicator Code AOP Registration No ChgS0155FG 5674-MHA AOP Indicator Code AOP Registration No ChgS0155G2 5674-MHB AOP Indicator Code AOP Registration No ChgS0155G0 5674-MHC AOP Indicator Code AOP Registration No ChgS0155FK 5674-MHM AOP Indicator Code AOP Registration No ChgS0155GZ 5674-MHP AOP Indicator Code AOP Registration No ChgS0155DR 5674-MHT AOP Indicator Code AOP Registration No ChgS0155GK 5674-MID AOP Indicator Code AOP Registration No ChgS0155DL 5674-MIG AOP Indicator Code AOP Registration No ChgS0155DN 5674-MK1 AOP Indicator Code AOP Registration No ChgS0155G3 5674-MKE AOP Indicator Code AOP Registration No ChgS0155GL 5674-MNV AOP Indicator Code AOP Registration No ChgS0155FB 5674-MOP AOP Indicator Code AOP Registration No ChgS0155GR 5674-MRR AOP Indicator Code AOP Registration No ChgS0155FR 5674-MSP AOP Indicator Code AOP Registration No ChgS0155FF 5674-MST AOP Indicator Code AOP Registration No ChgS0155GS 5674-MTP AOP Indicator Code AOP Registration No ChgS0155GH 5674-MTR AOP Indicator Code AOP Registration No ChgS0155DM 5674-OLP AOP Indicator Code AOP Registration No ChgS0155FT 5674-PCR AOP Indicator Code AOP Registration No ChgS0155G8 5674-PDP AOP Indicator Code AOP Registration No ChgS0155F4 5674-PLT AOP Indicator Code AOP Registration No ChgS0155G6 5674-PRL AOP Indicator Code AOP Registration No ChgS0155GB 5674-PRR AOP Indicator Code AOP Registration No ChgS0155FW 5674-PSY AOP Indicator Code AOP Registration No ChgS0155F0 5674-RRS AOP Indicator Code AOP Registration No ChgS0155GF 5674-RST AOP Indicator Code AOP Registration No ChgS0155FC 5674-SHF AOP Indicator Code AOP Registration No ChgS0155F3 5674-SOR AOP Indicator Code AOP Registration No ChgS0155GM 5674-UDP AOP Indicator Code AOP Registration No ChgS0155GN 5674-WKI AOP Indicator Code AOP Registration No Chg

5672-MB2 DELMIA - NC Machine Tool Builder 2 Configuration


S0157F1 5674-DST AOP Indicator Code AOP Registration No ChgS0155WZ 5674-MGS AOP Indicator Code AOP Registration No ChgS0155X0 5674-MLM AOP Indicator Code AOP Registration No ChgS0155X1 5674-MPM AOP Indicator Code AOP Registration No ChgS0155X3 5674-WSU AOP Indicator Code AOP Registration No Chg

5672-MF2 DELMIA - Manufacturing Simulation Foundation 2 Configuration


S0155X4 5674-DC1 AOP Indicator Code AOP Registration No ChgS0155X5 5674-DLD AOP Indicator Code AOP Registration No ChgS0157F2 5674-DST AOP Indicator Code AOP Registration No ChgS0155X6 5674-FB1 AOP Indicator Code AOP Registration No ChgS0155X7 5674-GSM AOP Indicator Code AOP Registration No ChgS0155X8 5674-HP1 AOP Indicator Code AOP Registration No ChgS0155XM 5674-LB1 AOP Indicator Code AOP Registration No ChgS0155X9 5674-LL1 AOP Indicator Code AOP Registration No ChgS0155XB 5674-MAS AOP Indicator Code AOP Registration No ChgS0155XC 5674-MG1 AOP Indicator Code AOP Registration No ChgS0155XD 5674-MGS AOP Indicator Code AOP Registration No ChgS0155XF 5674-MNC AOP Indicator Code AOP Registration No ChgS0155XG 5674-MPD AOP Indicator Code AOP Registration No ChgS0155XH 5674-MRT AOP Indicator Code AOP Registration No ChgS0155XJ 5674-MWS AOP Indicator Code AOP Registration No ChgS0155XK 5674-PRM AOP Indicator Code AOP Registration No ChgS0155XL 5674-SOR AOP Indicator Code AOP Registration No Chg

5672-MP2 DELMIA - Machining Foundation 2 Configuration


S0157F3 5674-DST AOP Indicator Code AOP Registration No ChgS0155XN 5674-MAS AOP Indicator Code AOP Registration No ChgS0155XP 5674-MG1 AOP Indicator Code AOP Registration No ChgS0155XR 5674-MGS AOP Indicator Code AOP Registration No Chg



S0155XS 5674-MLM AOP Indicator Code AOP Registration No ChgS0155XT 5674-MMA AOP Indicator Code AOP Registration No ChgS0155XV 5674-MPD AOP Indicator Code AOP Registration No ChgS0155XW 5674-MPM AOP Indicator Code AOP Registration No ChgS0155XX 5674-MRT AOP Indicator Code AOP Registration No ChgS0155XZ 5674-MWS AOP Indicator Code AOP Registration No ChgS0155Z0 5674-PRM AOP Indicator Code AOP Registration No Chg

5672-PD2 DELMIA - DPM Process Definition 2 Configuration


S0157F4 5674-DST AOP Indicator Code AOP Registration No ChgS0155Z1 5674-GSM AOP Indicator Code AOP Registration No ChgS0155Z2 5674-MAS AOP Indicator Code AOP Registration No ChgS0155Z3 5674-MG1 AOP Indicator Code AOP Registration No ChgS0155Z4 5674-MGS AOP Indicator Code AOP Registration No ChgS0155Z5 5674-MNC AOP Indicator Code AOP Registration No ChgS0155Z6 5674-MPD AOP Indicator Code AOP Registration No ChgS0155Z7 5674-MRT AOP Indicator Code AOP Registration No ChgS0155Z8 5674-MWS AOP Indicator Code AOP Registration No ChgS0155ZB 5674-SRL AOP Indicator Code AOP Registration No ChgS0155ZC 5674-WSU AOP Indicator Code AOP Registration No Chg

5672-PP2 DELMIA - DPM Machining 2 Configuration


S0157F5 5674-DST AOP Indicator Code AOP Registration No ChgS0155ZD 5674-MGS AOP Indicator Code AOP Registration No Chg

5672-PR2 DELMIA - DPM Review 2 Configuration


S0157F6 5674-DST AOP Indicator Code AOP Registration No ChgS0155ZF 5674-GSM AOP Indicator Code AOP Registration No ChgS0155ZG 5674-MAS AOP Indicator Code AOP Registration No ChgS0155ZH 5674-MG1 AOP Indicator Code AOP Registration No ChgS0155ZJ 5674-MGS AOP Indicator Code AOP Registration No ChgS0155ZK 5674-MNC AOP Indicator Code AOP Registration No ChgS0155ZL 5674-MPD AOP Indicator Code AOP Registration No ChgS0155ZM 5674-MRT AOP Indicator Code AOP Registration No ChgS0155ZN 5674-MWS AOP Indicator Code AOP Registration No ChgS0155ZR 5674-SOR AOP Indicator Code AOP Registration No ChgS0155ZS 5674-WKI AOP Indicator Code AOP Registration No ChgS0155ZT 5674-WSQ AOP Indicator Code AOP Registration No ChgS0155ZV 5674-WSU AOP Indicator Code AOP Registration No Chg

5672-SF2 DELMIA - DPM Shop 2 Configuration


S0157F7 5674-DST AOP Indicator Code AOP Registration No ChgS0155ZW 5674-GSM AOP Indicator Code AOP Registration No ChgS0155ZX 5674-MAS AOP Indicator Code AOP Registration No ChgS0155ZZ 5674-MG1 AOP Indicator Code AOP Registration No ChgS015600 5674-MGS AOP Indicator Code AOP Registration No ChgS015601 5674-MNC AOP Indicator Code AOP Registration No ChgS015602 5674-MPD AOP Indicator Code AOP Registration No ChgS015603 5674-MRT AOP Indicator Code AOP Registration No ChgS015604 5674-MVG AOP Indicator Code AOP Registration No ChgS015605 5674-MWS AOP Indicator Code AOP Registration No ChgS015607 5674-SOR AOP Indicator Code AOP Registration No ChgS015608 5674-SRL AOP Indicator Code AOP Registration No Chg

5672-SP2 DELMIA - Structure Manufacturing Preparation 2 Configuration


S0157F8 5674-DST AOP Indicator Code AOP Registration No ChgS015609 5674-GSM AOP Indicator Code AOP Registration No ChgS01560B 5674-MAS AOP Indicator Code AOP Registration No Chg



S01560C 5674-MGS AOP Indicator Code AOP Registration No ChgS01560D 5674-MNC AOP Indicator Code AOP Registration No ChgS01560F 5674-MPD AOP Indicator Code AOP Registration No ChgS01560G 5674-MRT AOP Indicator Code AOP Registration No ChgS01560H 5674-MWS AOP Indicator Code AOP Registration No ChgS01560J 5674-PRM AOP Indicator Code AOP Registration No ChgS01560L 5674-SRL AOP Indicator Code AOP Registration No ChgS01560M 5674-WSU AOP Indicator Code AOP Registration No Chg

5672-SR2 DELMIA - DPM Shop Order Release 2 Configuration


S0157F9 5674-DST AOP Indicator Code AOP Registration No ChgS01560N 5674-GSM AOP Indicator Code AOP Registration No ChgS01560P 5674-MAS AOP Indicator Code AOP Registration No ChgS01560R 5674-MG1 AOP Indicator Code AOP Registration No ChgS01560S 5674-MGS AOP Indicator Code AOP Registration No ChgS01560T 5674-MNC AOP Indicator Code AOP Registration No ChgS01560V 5674-MPD AOP Indicator Code AOP Registration No ChgS01560W 5674-MRT AOP Indicator Code AOP Registration No ChgS01560X 5674-MWS AOP Indicator Code AOP Registration No ChgS015610 5674-SRL AOP Indicator Code AOP Registration No Chg

5672-VT2 DELMIA - NC Machine Tool Simulation 2 Configuration


S0157FB 5674-DST AOP Indicator Code AOP Registration No ChgS015611 5674-MAS AOP Indicator Code AOP Registration No ChgS015612 5674-MG1 AOP Indicator Code AOP Registration No ChgS015613 5674-MGS AOP Indicator Code AOP Registration No ChgS015614 5674-MMA AOP Indicator Code AOP Registration No ChgS015615 5674-MPD AOP Indicator Code AOP Registration No ChgS015616 5674-MPM AOP Indicator Code AOP Registration No ChgS015617 5674-MRT AOP Indicator Code AOP Registration No ChgS015618 5674-MWS AOP Indicator Code AOP Registration No ChgS01561B 5674-SOR AOP Indicator Code AOP Registration No Chg

5672-WL2 DELMIA - Robotics Simulation 2 Configuration


S01561C 5674-DC1 AOP Indicator Code AOP Registration No ChgS01561D 5674-DLD AOP Indicator Code AOP Registration No ChgS0157FC 5674-DST AOP Indicator Code AOP Registration No ChgS01561F 5674-FB1 AOP Indicator Code AOP Registration No ChgS01561G 5674-GSM AOP Indicator Code AOP Registration No ChgS01561H 5674-HP1 AOP Indicator Code AOP Registration No ChgS01561J 5674-LB1 AOP Indicator Code AOP Registration No ChgS01561K 5674-LL1 AOP Indicator Code AOP Registration No ChgS01561L 5674-MEC AOP Indicator Code AOP Registration No ChgS01561M 5674-MGS AOP Indicator Code AOP Registration No ChgS01561N 5674-MNC AOP Indicator Code AOP Registration No Chg

5672-XP2 DELMIA - DPM Process & Resource Definition 2 Configuration


S0157FD 5674-DST AOP Indicator Code AOP Registration No ChgS01561P 5674-GSM AOP Indicator Code AOP Registration No ChgS01561R 5674-MGS AOP Indicator Code AOP Registration No ChgS01561S 5674-MNC AOP Indicator Code AOP Registration No ChgS01561T 5674-WSU AOP Indicator Code AOP Registration No Chg

• Platform and quantity

Note: The configurator will automatically add to your order:

• The appropriate billing feature numbers

• The appropriate SPO information



To order a custom configuration, specify:

• The standard configuration program feature number

• The user quantity

• The AOPs (applies to Process Detailing and Validation only)

Note: The configurator will automatically add to your order:

• The AOP indicator codes and AOP PIDs (applies to Process Detailing and Validation only)

• The appropriate billing feature numbers

• The appropriate SPO information

Orderable supplies

Only configurations ship supplies because configurations are prerequisites for all shareableproducts and add-on products. (An exception is those few products that have standalonesupplies.) For each configuration ordered, the ShopPLM configurator will add the 5628-DELsystem program order (SPO) and assign the entitlement entity number for the orderable supply.

Previously announced orderable supplies

5628-DEL SPO Distri-orderable butionsupply ID Language medium Description

S0146HT English CD-ROM DELMIA All-in-one Mktg 2 Cf (5672-DA2)S013R4G English CD-ROM DELMIA DPM Assembly 2 Cf (5672-AP2)S013R4D English CD-ROM DELMIA DPM Body In White2 Cf (5672-BP2)S0146WT English CD-ROM DELMIA DPM BodynWhite XT2 Cf (5672-BX2)S013R48 English CD-ROM DELMIA DPM Machining 2 Cf (5672-PP2)S0146WN English CD-ROM DELMIA DPM Process Def 2 Cf (5672-PD2)S0146WR English CD-ROM DELMIA DPM Proc&RsrcDef 2 Cf (5672-XP2)S013R4B English CD-ROM DELMIA DPM Review 2 Cf (5672-PR2)S013R44 English CD-ROM DELMIA DPM Shop 2 Cf (5672-SF2)S0146WS English CD-ROM DELMIA DPM Structure 2 Cf (5672-DS2)S0146WW English CD-ROM DELMIA ENVISION Asm 2 Cf (5672-EA2)S0146WX English CD-ROM DELMIA Mach Foundation 2 Cf (5672-MP2)S0146WZ English CD-ROM DELMIA Mfg Sim Foundatn 2 Cf (5672-MF2)S01465L English CD-ROM DELMIA MultCx Sldwrk Plgn AO (5674-MSP)S013R4L English CD-ROM DELMIA MultCx Sldwrk Plgn Pr (5672-MSP)S01465B English CD-ROM DELMIA MultiCAx AD Plg-in AO (5674-MAP)S0146HS English CD-ROM DELMIA MultiCAx AD Plg-in Pr (5672-MAP)S01465D English CD-ROM DELMIA MultiCAx ID Plg-in AO (5674-IDP)S0146HR English CD-ROM DELMIA MultiCAx ID Plg-in Pr (5672-IDP)S01465J English CD-ROM DELMIA MultiCAx PD Plg-in AO (5674-PDP)S013R40 English CD-ROM DELMIA MultiCAx PD Plg-in Pr (5672-PDP)S0146HX English CD-ROM DELMIA MultiCAx SE Plg-in AO (5674-MEP)S013R46 English CD-ROM DELMIA MultiCAx SE Plg-in Pr (5672-MEP)S0146HW English CD-ROM DELMIA MultiCAx UD Plg-in AO (5674-UDP)S013R4T English CD-ROM DELMIA MultiCAx UD Plg-in Pr (5672-UDP)S0146HV English CD-ROM DELMIA MultiCx IGES Plgin AO (5674-MGP)S013R4R English CD-ROM DELMIA MultiCx IGES Plgin Pr (5672-MGP)S01465G English CD-ROM DELMIA MultiCx STEP Plgin AO (5674-MTP)S013R4J English CD-ROM DELMIA MultiCx STEP Plgin Pr (5672-MTP)S0146X2 English CD-ROM DELMIA NC Mach Tool Bldr2 Cf (5672-MB2)S0146X1 English CD-ROM DELMIA NC Mach Tool Sim2 Cf (5672-VT2)S013R4N English CD-ROM DELMIA Robotics Simulatn2 Cf (5672-WL2)S013R42 English CD-ROM DELMIA Shop Ordr Release2 Cf (5672-SR2)S0146X5 English CD-ROM DELMIA Structure Mfg 2 Cf (5672-SP2)S014RPP English CD-ROM DELMIA ENOVIA Mfg Hub Acc Cf (5671-EAC)S014RPM English CD-ROM DELMIA Process Engineer Cf (5671-EEC)S014RPH English CD-ROM DELMIA Industrial Eng Cf (5671-EIC)S014RPK English CD-ROM DELMIA PPR Nav - Mfg Hub Cf (5671-EPC)S014RPS English CD-ROM DELMIA Proc & Resrc Plan Cf (5671-ERC)



New orderable supplies for DELMIA V5.19

5628-DEL SPO Distri-orderable butionsupply ID Language medium Description

S015677 English CD-ROM DELMIA Ctrld Wkcl Bldr 2 Cfg (5672-CB2)S015679 English CD-ROM DELMIA Ctrld Wkcl Vldtn 2 Cf (5672-CW2)S01567C English CD-ROM DELMIA Robt Paint Fndtn 2 Cf (5672-FP2)

Customization options

Contact your CSO organization for any special handling such as suppression of media orexpediting an order.

One English softcopy collection kit is included in each base shipment.

Customers of record can order one additional copy using the previously announced entitlemententity and orderable supply ID.

Additional kits can be purchased through the IBM Publication Ordering System at the followingWeb site using the order number below.

http://www.ibm.com/shop/publications/order

OrderDescription number

DELMIA Version 5 Softcopy Collection Kit SK4T-3605-02English

Terms and conditions

Agreement

IBM Customer Agreement

Designated machine

Not required

Variable charges apply

No

Location license applies

No

Use limitation applies

Yes, as implemented by the license management models described.

License management for DELMIA Process Detailing and Validation

DELMIA Version 5 controls the number of concurrent users of a configuration or product,according to the number of license keys acquired for the configuration or product.

DELMIA Version 5 delivers identical license management mechanisms on UNIX and Windowsenvironments, based on IBM License Use Management (LUM). The following licensemanagement principles apply:

http://www.ibm.com/shop/publications/order



• A DELMIA Process Detailing and Validation configuration (standard or custom) will requirea license key. License keys for configurations are acquired and released for the totalconfiguration. The products within a configuration cannot be shared.

• Each shareable product will require a license key, in addition to one for the prerequisiteconfiguration and any prerequisite product, if applicable.

• In all cases, configuration license keys are acquired at the beginning of the process and arereleased at its termination.

• Add-on (AOP) and shareable products may require license keys for prerequisite products thatare not already included in a standard configuration. Prerequisites for shareable productscan be satisfied by a standard configuration, by an AOP within a custom configuration, or bya shareable product. However, because all add-on products are defined within one customlicense key, any AOP prerequisites must be satisfied by either a standard configuration or byother AOPs purchased and defined within the same custom configuration.

• LUM keys must be renewed, typically every two years. The actual duration will depend on theorder details.

DELMIA Process Detailing and Validation can be used in three license management modes:nodelock, with concurrent usage of license keys on a network, or concurrent offline licensemanagement.

Nodelock usage: The use of a local display is mandatory for usage in nodelock mode. There isno limit to the number of processes launched for a given license key (configuration or product).For instance, a user can launch the following simultaneous processes:

• An interactive session

• A process executed through an OLE container application

• Replay of macros recorded from captured sequences of user interactions

In the nodelock mode of operation, only one license key per configuration and shareable productcan be registered per machine, and only one user can run at a time on that machine. If multiplelicense keys per configuration or shareable product, or multiple users on a single machine, arerequired, refer to the Concurrent usage section.

Concurrent usage: A user on one machine on one display uses one license key perconfiguration or shareable product used, regardless of the number of processes. If the displaychanges, then an additional license key is taken for the corresponding process.

Dynamic license management: Shareable product license keys can be acquired andreleased during the session. (The ability to acquire and release licenses is not available forconfigurations.) Shareable license keys acquired at the beginning of the session cannot bereleased before the end of the session; only license keys dynamically granted upon user requestduring the session can be released during the session.

Concurrent offline license management: A concurrent license key control technique isavailable via the LUM server. It gives applications running on a Windows laptop the ability todisconnect from the license key server for a specific period of time.

During the checkout period, the server license key is unavailable for use by another concurrentuser. This feature is designed to add additional flexibility to a user's work environment. It isoffered to accommodate short-term travel needs and collaboration while away from a fixed officeenvironment or server connection. All ICA terms and conditions, including cross-border licensingterms, are unchanged, and users will check-out and check-in license keys at their home server,where rules and procedures are controlled by LUM.

License management for DELMIA Process Planning

Process Planning applications require FlexLM 8.3b on the Manufacturing Hub server andProcess Planning clients for license management purposes. FlexLM supports three licensingmethods:

• License file: A license file is supplied for each server and client based on the customer order.

• License server: The license server runs an NT-Service that manages a central license file forall servers and clients.



• Temporary license: The install process provides an option to create a temporary 30-daylicense. The license file is created after entering a license code.

Educational allowance available

The standard educational allowance does not apply to DELMIA.

Volume orders

Contact your IBM representative.

Warranty applies

Yes

Licensed program materials availabilityRestricted materials of IBM: NoneNon-restricted source materials: NoneObject code only (OCO): All

Program services

Program Services offer a method of reporting code-related problems for DELMIA licensedsoftware products. Program Services are available electronically using the problem submissionprocess at the PLM Technical Support Web site

http://www.ibm.com/software/applications/plm/support/

Note: In order to use this facility, you must use an IBM ID which has associated to it the licensedIBM customer number under which the product was purchased. If you have not yet obtained anIBM ID, visit

http://www.ibm.com/account/profile/

If you have not yet associated the licensed IBM customer number to your IBM ID, you will beprompted to do so when accessing the problem submission facility.

When using Program Services, the problem report is submitted via the PLM Technical SupportWeb site; all subsequent communications will be via e-mail. The response time for theseproblem reports, regardless of the severity, will be within two business days. All communicationsmust be in English.

Not all options of the PLM technical support e-services are available in all countries.

Preventive Service is delivered through the next release of DELMIA products. The new releasealso includes corrections to problems, depending on the time of their submission and theirseverity.

During the Program Services period, Corrective Service for DELMIA Version 5 releases isdelivered through service packs on a regular basis. A service pack includes corrections forBlocking Problems in production systems reported on this release and all corrections availablefor all components at the time it is built. Service packs are provided at the same time for allplatforms currently supported. Each service pack supersedes the previous one and may beinstalled on top of the released level or on top of a previous service pack.

Customers may request a correction via a service pack for Blocking Problems. A BlockingProblem is defined as:

• A problem that stops production: The customer is currently using the level for which a fix isrequested in a production environment.

• A problem that prevents migration: The customer must provide the migration plan.

• A problem that halts testing of a given level: A fix will allow customer to continue the testing.

• Installation problem: A problem that prevents the customer from installing or using the product.

• Regression: Problems reported as regressions may be due to an operation that was beingperformed erroneously or created incorrect data with a previous release and the current


http://www.ibm.com/account/profile/



release no longer permits these operations. Therefore, each problem reported as a regressionmust be evaluated. True regressions will be handled as Severity 1 problems.

Note: Customers experiencing problems with IBM License Use Management (LUM) productswhen used with DELMIA Version 5 products may report these problems through PLM productsupport. Note this only applies when the LUM product is being used in conjunction with aDELMIA product and the DELMIA product is within its support period. LUM problems will receivethe Program Services level of support and must be submitted via the Problem Reporting processat the PLM Technical Support web site at


Program Services will be provided for DELMIA V5.19 products until June 3, 2011. After that date,should it be necessary for customers who are up-to-date on their Annual License Charge (ALC)payments to extend support, a support extension will be available for an additional fee.

This extension is for one year only, with no possibility of renewal, and will be limited to supportof critical situations found in production running on an announced, supported environment andsubject to the availability and maintainability of Operating Systems, databases, middlewareand hardware (clients and servers) at the time the critical situation is reported. Critical situationmeans a Severity 1 defect that is blocking production and has no workable alternative to unblockproduction.

In order to insure uninterrupted support, support extension requests should be submitted byDecember 3, 2010, through the customer's marketing team or Business Partner.

This extension of support will not constitute an alternative to the customer's migration to thelatest release or version of the installed products and therefore the customer is obligated to havea documented and viable migration plan to the latest release or version in order to obtain anextension of support.

For a list of all currently supported releases of CATIA, ENOVIA and DELMIA products visit


At the bottom of the page, select "End of support dates" under Plan - Product life cycle.

IBM operational support services - SupportLine

No

Other support

PLM Support Centers

Prices

PLC/ALC: Customers who pay a PLC and an ALC for a licensed program receiveenhancements and future releases, if any, at no additional charge. Significant new functionsmay be offered as an optional feature and charged for separately. If a replacement programis announced and the customer elects to license the replacement program for a PLC/ALC andreplace the prior program, an upgrade charge may apply.

The first payment consists of the primary license charge and the annual license charge. Theannual license charge applies yearly thereafter.

Use level charge: Charges for this program are based on usage levels. When a customerupgrades to a higher level of usage, a usage upgrade charge will apply, equal to the differencebetween the charge for the current level of usage and the higher level of usage.

IBM Global Financing

IBM Global Financing offers competitive financing to credit-qualified customers to assist themin acquiring IT solutions. Offerings include financing for IT acquisition, including hardware,





software, and services, from both IBM and other manufacturers or vendors. Offerings (for allcustomer segments: small, medium, and large enterprise), rates, terms, and availability can varyby country. Contact your local IBM Global Financing organization or visit

http://www.ibm.com/financing

IBM Global Financing offerings are provided through IBM Credit LLC in the United States,and other IBM subsidiaries and divisions worldwide to qualified commercial and governmentcustomers. Rates are based on a customer's credit rating, financing terms, offering type,equipment type, and options, and may vary by country. Other restrictions may apply. Rates andofferings are subject to change, extension, or withdrawal without notice.

For more financing information, visit


Trademarks

Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States,other countries, or both.

POWER4 and POWER5 are trademarks of IBM Corporation in the United States, othercountries, or both.

IBM, AIX and RS/6000 are registered trademarks of IBM Corporation in the United States, othercountries, or both.

Intel, Pentium and Xeon are registered trademarks of Intel Corporation or its subsidiaries in theUnited States and other countries.

UNIX is a registered trademark of The Open Group in the United States and other countries.

Java and all Java-based trademarks are trademarks of Sun Microsystems, Inc. in the UnitedStates, other countries, or both.

PostScript is a registered trademark of Adobe Systems Incorporated in the United States, and/orother countries.

Other company, product, and service names may be trademarks or service marks of others.

Terms of use

IBM products and services which are announced and available in your country can be orderedunder the applicable standard agreements, terms, conditions, and prices in effect at the time.IBM reserves the right to modify or withdraw this announcement at any time without notice. Thisannouncement is provided for your information only. Additional terms of use are located at:

http://www.ibm.com/legal/us/en/

For the most current information regarding IBM products, consult your IBM representative orreseller, or visit the IBM worldwide contacts page

http://www.ibm.com/planetwide/us/



http://www.ibm.com/legal/us/en/

http://www.ibm.com/planetwide/us/

Documents

excellence DELMIA V5.19 extends digital manufacturing for