Upload
others
View
23
Download
0
Embed Size (px)
Citation preview
www.cellixltd.com
ExiGo Pump LabVIEW Manual
ExiGo Pump
TABLE O 1. Ex2. Ex3. La4. Ex
4.1
4.2 5. LE6. La7. Se
7.1
7.2
7.3 8. Ho9. Ho
9.1 10. Mo11. Ma12. Ex13. Se14. Pro
14.1
14.2 15. Re
Unit 1, LongmileTel: +353-1-450
p LabVIEW Manual
OF CONTEN
xiGo Pump Box CxiGo Pump OvervbVIEW installatio
xiGo drivers insta
Installation on
Installation on ED Status colours
bVIEW User Inteelecting the corre
More than 2 Ex
Pump not auto
How to manualow to initialize thow to set the Syr
Clamping the sove the pump to anual assay: HowxiGo Flow Sensoetting the PID parogram mode: De
Waveform Edit
Open/Save cusecording the Flow
e Business Park, Lo00-155 Fax: +35
TS
Contentsviewonallation
Windows XP
Windows 7s explanation
erface start and oect COM port
xiGo pumps dete
matically detecte
lly find the corree pumpinge type
syringethe assay requir
w to set the flow r: Visualizing therametersefining a custom
tor
stom waveformsw Rate data
ongmile Road, Dubl53-1-4500-158 Em
overview
ected
ed
ct COM port
red positionrate
e flow rates
waveform
in 12, Ireland mail: info@cellixltd
3 4 5 8
8
11 16 18 18
19
19
20 22 23
24 26 27 29 30 32
32
35 36
.com
ExiGo Pump
1. EXIG
1 iPad Bund
2 PC Softw
3 Purchase
Unit 1, LongmileTel: +353-1-450
p LabVIEW Manual
GO PUMP BO
dle only
ware Bundle only
ed separately
e Business Park, Lo00-155 Fax: +35
OX CONTEN
ongmile Road, Dubl53-1-4500-158 Em
3
NTS
in 12, Ireland mail: [email protected]
ExiGo Pump
2. EXIG
Unit 1, LongmileTel: +353-1-450
p LabVIEW Manual
GO PUMP OV
e Business Park, Lo00-155 Fax: +35
VERVIEW
ongmile Road, Dubl53-1-4500-158 Em
4
in 12, Ireland mail: [email protected]
ExiGo Pump
3. LABVPlease com
1. OpAltww
2. Se
1 You may in case you
Unit 1, LongmileTel: +353-1-450
p LabVIEW Manual
VIEW INSTAmplete the followin
pen the LabVIEWernatively you
ww.cellixltd.com
elect the destinatio
require Administ
u cannot perform t
e Business Park, Lo00-155 Fax: +35
ALLATION ng steps:
W installation C
can download
on folder and click
rator rights. Pleasthe installation.
ongmile Road, Dubl53-1-4500-158 Em
5
D and open ththe files fro
k Next.
se contact your sy
in 12, Ireland mail: info@cellixltd
e file Setup.exeom our webpa
ystem administrat
.com
e1. ge
tor
ExiGo Pump
3. Cli
4. Wa
2 Please ndepending
Unit 1, LongmileTel: +353-1-450
p LabVIEW Manual
ck Next2
ait until the installa
note that the coon previous versi
e Business Park, Lo00-155 Fax: +35
ation is complete.
ntent of this winions installed.
ongmile Road, Dubl53-1-4500-158 Em
6
ndow may vary o
in 12, Ireland mail: info@cellixltd
on each compute
.com
er,
ExiGo Pump
5. On
6. Re
Unit 1, LongmileTel: +353-1-450
p LabVIEW Manual
nce the installation
estart your comput
e Business Park, Lo00-155 Fax: +35
n is complete, clic
ter if required.
ongmile Road, Dubl53-1-4500-158 Em
7
ck Finish.
in 12, Ireland mail: info@cellixltd
.com
ExiGo Pump
4. EXIGPrior to proLabVIEW ican downlo
4.1 Insta
1. Cosw
2. CoPC
3. Thof t
4. Cli
Unit 1, LongmileTel: +353-1-450
p LabVIEW Manual
GO DRIVERSoceeding with the nstallation CD wh
oad the latest vers
allation on Wind
onnect the power witch until the Statu
onnect the USB caC.
e PC should detethe drivers
ck Next >
e Business Park, Lo00-155 Fax: +35
S INSTALLATIinstallation of the
hich contains the sion of the drivers
ows XP
supply to the Pous LED indicator t
able to the ExiGo
ect the new device
ongmile Road, Dubl53-1-4500-158 Em
8
ION e ExiGo drivers; pdrivers in your P
s from www.cellixlt
ower connector anturns on.
USB connector a
e and commence
in 12, Ireland mail: info@cellixltd
please introduce tC. Alternatively ytd.com.
nd press the pow
and plug it into yo
with the installati
.com
he ou
wer
our
on
ExiGo Pump
5. Se
6. Se
Unit 1, LongmileTel: +353-1-450
p LabVIEW Manual
elect No, not this ti
elect Install from a
e Business Park, Lo00-155 Fax: +35
ime and click Nex
list or specific loc
ongmile Road, Dubl53-1-4500-158 Em
9
xt >
cation (Advanced)
in 12, Ireland mail: info@cellixltd
)
.com
ExiGo Pump
7. Cli
theTh
8. Th
Co
Unit 1, LongmileTel: +353-1-450
p LabVIEW Manual
ck Browse and se LabVIEW CD, en click Next >
e driver installatontinue Anyway
e Business Park, Lo00-155 Fax: +35
select the locationclick Search rem
ion should comm
ongmile Road, Dubl53-1-4500-158 Em
10
n of the ExiGo USmovable media (f
mence. If a warn
in 12, Ireland mail: info@cellixltd
SB Drivers. If usifloppy, CD-ROM..
ning appears, cli
.com
ng ..).
ick
ExiGo Pump
9. Th
10. Re
4.2 Insta
1. Cosw
2. CoPC
Unit 1, LongmileTel: +353-1-450
p LabVIEW Manual
e driver has been
epeat steps 6 to 9
allation on Wind
onnect the power witch until the Statu
onnect the USB caC.
e Business Park, Lo00-155 Fax: +35
n installed success
until all the driver
ows 7
supply to the Pous LED indicator t
able to the ExiGo
ongmile Road, Dubl53-1-4500-158 Em
11
sfully.
rs are installed pro
ower connector anturns on.
USB connector a
in 12, Ireland mail: info@cellixltd
operly.
nd press the pow
and plug it into yo
.com
wer
our
ExiGo Pump
3. OpMa
4. W
Up
5. Se
Unit 1, LongmileTel: +353-1-450
p LabVIEW Manual
pen the Device Manager)
Within the tab “Othpdate Driver Softw
elect “Browse my c
e Business Park, Lo00-155 Fax: +35
Manager (Start
her Devices”, rigware...
computer for drive
ongmile Road, Dubl53-1-4500-158 Em
12
Control Panel
ht click on ExiGo
er software”
in 12, Ireland mail: info@cellixltd
System Devi
o Pump and sele
.com
ce
ect
ExiGo Pump
6. Cli
7. If y
8. Th
Unit 1, LongmileTel: +353-1-450
p LabVIEW Manual
ck “Browse” and s
your PC displays a
e driver has been
e Business Park, Lo00-155 Fax: +35
select the ExiGo U
a warning, click on
n installed success
ongmile Road, Dubl53-1-4500-158 Em
13
USB Drivers folde
n Install this drive
sfully
in 12, Ireland mail: info@cellixltd
er
r software anyway
.com
y
ExiGo Pump
9. Re
10. AftPC
Unit 1, LongmileTel: +353-1-450
p LabVIEW Manual
epeat Steps 4 to 8
ter the installationC (USB Serial Port
e Business Park, Lo00-155 Fax: +35
8 for the second E
is complete, a tht). If so, complete
ongmile Road, Dubl53-1-4500-158 Em
14
xiGo Pump on the
hird device might b steps 4 to 8 for th
in 12, Ireland mail: info@cellixltd
e Device manage
be detected by yohe new device.
.com
r.
our
ExiGo Pump
11. Ins
Unit 1, LongmileTel: +353-1-450
p LabVIEW Manual
stallation complete
e Business Park, Lo00-155 Fax: +35
ed!
ongmile Road, Dubl53-1-4500-158 Em
15
in 12, Ireland mail: info@cellixltd
.com
ExiGo Pump
5. LEDColor
Unit 1, LongmileTel: +353-1-450
p LabVIEW Manual
D STATUS COEF
2
2
F
S
R
e Business Park, Lo00-155 Fax: +35
OLOURS EXPEffect Flashing
2 Flashes and fad
2 Flashes and fad
Flashing
Static
Rotating
ongmile Road, Dubl53-1-4500-158 Em
16
PLANATIONMeaniPump PleaseLED cprior pump.
des out Pump no seboot ti
des out Pump sensotime
Initializ
Pump assay
Pump mode
in 12, Ireland mail: info@cellixltd
ng is booting u
e wait until Statchanges its colo
to connect t
not initialized aensor detected me
not initialized aor detected at bo
zing Pump
ready with programmed
running in manu
.com
up. tus our he
nd at
nd oot
no
ual
ExiGo Pump
Unit 1, LongmileTel: +353-1-450
p LabVIEW Manual
S
R
F
e Business Park, Lo00-155 Fax: +35
Static
Rotating
Flashing
ongmile Road, Dubl53-1-4500-158 Em
17
Pump progra
Pump progra
Criticacontacsuppo
in 12, Ireland mail: info@cellixltd
ready with assammed
running in assammed mode
al error. Pleact Cellix technicrt.
.com
say
say
se cal
ExiGo Pump
6. LABV The LabVIE
7. SELEThe ExiGo port and esome caseexample, ifPC.
Unit 1, LongmileTel: +353-1-450
p LabVIEW Manual
VIEW USER
EW user interface
M
T
M
T
P
T
ECTING THELabVIEW interfa
stablishing commes, it may be requf two or more ExiG
e Business Park, Lo00-155 Fax: +35
R INTERFACE
e is comprised of t
Main
This window allow• Initialize th• Set the sy• Move the
by the ass
Manual
This window allow• Run the p• Visualize • Record th• Set PID p
Program
This window allow• Create a
pump with• Visualize
CORRECT Cce should be cap
munication with thired for the user tGo pumps are co
ongmile Road, Dubl53-1-4500-158 Em
18
E START AN
three different win
ws the user to: he pump. yringe.
pump to the initisay.
ws the user to: pump in manual mthe measured flowe measured flow arameters.
ws the user to: custom waveform
h it. the running assay
COM PORTpable of determininhe pump automatto select the adeqnnected to differe
in 12, Ireland mail: info@cellixltd
D OVERVIEW
ndows:
al position requir
mode. w rates. rates.
m and program t
y status.
ng the correct COically. However, quate COM port, fent USB ports in t
.com
W
ed
he
OM in
for he
ExiGo Pump
7.1 MoreIf there areport), the fo
Please, sel
7.2 PumWhen the connected,
Please, sel
3 If your COconnected
Unit 1, LongmileTel: +353-1-450
p LabVIEW Manual
e than 2 ExiGo pe more than 2 Exollowing dialog sh
lect the correct CO
mp not automaticLabVIEW User
, a manual COM p
lect the correct CO
OM port is not in between the ExiG
e Business Park, Lo00-155 Fax: +35
pumps detectedxiGo pumps connhould appear.
OM port for the pu
cally detected Interface is no
port selection men
OM port for your E
the list, please e
Go pump and the
ongmile Road, Dubl53-1-4500-158 Em
19
ected (each to an
ump you would lik
t able to detectnu should appear
ExiGo pump and c
nsure that the USPC, then click Re
in 12, Ireland mail: info@cellixltd
n independent US
ke to connect to:
t the ExiGo pum.
click ok.3
SB cable is propeefresh and try aga
.com
SB
mp
rly in.
ExiGo Pump
7.3 HowTo manualManager. Wappear und Windows To Open th
Device M
Windows To Open tManager
Unit 1, LongmileTel: +353-1-450
p LabVIEW Manual
w to manually findly check the COMWithin the sectionder the name “US
XP: he Device manageManager
7 he Device manag
e Business Park, Lo00-155 Fax: +35
d the correct COM port assigned tn “Ports (COM &
SB Serial Port” or “
er click Start C
ger click Start
ongmile Road, Dubl53-1-4500-158 Em
20
OM port to an ExiGo pum
& LPT)”, the ExiG“ExiGo USB Seria
Control Panel S
Control Panel
in 12, Ireland mail: info@cellixltd
p, open the DeviGo COM port shoual Port”.
System Hardwa
System Devi
.com
ce uld
are
ce
ExiGo Pump
Unit 1, LongmileTel: +353-1-450
p LabVIEW Manual
e Business Park, Lo00-155 Fax: +35
ongmile Road, Dubl53-1-4500-158 Em
21
in 12, Ireland mail: info@cellixltd
.com
ExiGo Pump
8. HOW
1
The NOT Istarting the
1.
2.
4 Warninduring the in
Unit 1, LongmileTel: +353-1-450
p LabVIEW Manual
W TO INITIALI
INITIALIZED statue assay. In order
Remove any inspump’s plunger
The user interfapump to the howill change to S
g: Failure to remov
nitialization.
e Business Park, Lo00-155 Fax: +35
IZE THE PUM
2
us means that thto initialize the pu
stalled syringe on image to begin th
ace will ask for coome position. OncTOPPED.
ve any installed syri
ongmile Road, Dubl53-1-4500-158 Em
22
MP
e pump MUST bump, please follow
the pump4. Thenhe initialization.
onfirmation and thce the Pump is in
inge may cause the
in 12, Ireland mail: info@cellixltd
be initialized prior w the next steps:
double click on t
hen it will move tnitialized, the stat
e pump to malfuncti
.com
to
he
he tus
ion
ExiGo Pump
9. HOW The type orunning thesteps:
1
Figure 1
1. Do2. A S3. Se
syr
*Note: the sHamilton
Part Numbe80601 80701 80801
Part Numbe81301 BD PlastiPart Numbe300013 300185 302187
Unit 1, LongmileTel: +353-1-450
p LabVIEW Manual
W TO SET TH
of syringe to be ue assay. In orde
2
Figure 2
ouble click on the sSyringe Selector wlect the desired sringe to set it.
syringes acceptedSyringes
er Description100 µL, Mod250 µL, Mod500 µL, Mod
er Description1mL, Model
pak Syringes er Description
1 mL Syring2.5 mL Syrin5 mL Syring
e Business Park, Lo00-155 Fax: +35
E SYRINGE
used during the eer to set the syri
2
syringe image in twindow will appeasyringe and click
d are the following
700 Seriendel 710 LT SYR del 725 LT SYR del 750 LT SYR
1000 Serien
1001 LT SYR
ne. Luer tip
nge. Luer tip e. Luer tip
ongmile Road, Dubl53-1-4500-158 Em
23
TYPE experiment must nge, please com
the user interfacear.* SET or double cl
g:
es
es
in 12, Ireland mail: info@cellixltd
be defined prior mplete the followi
3
Figure 3
.
lick on the select
.com
to ng
ed
ExiGo Pump
9.1 Clam
1
Figure 4
Remove th
2
Figure 5
Place the (position 1 the pump’s
Unit 1, LongmileTel: +353-1-450
p LabVIEW Manual
mping the syring
he syringe clamp.
syringe in the puin Figure 5) and t
s plunger if require
e Business Park, Lo00-155 Fax: +35
ge
ump with the bodthe plunger restined (see section 10
ongmile Road, Dubl53-1-4500-158 Em
24
dy resting on theng on position 2. M0).
in 12, Ireland mail: info@cellixltd
e front of the pumMove the position
.com
mp of
ExiGo Pump
3
Figure 6
Put the syrfirmly. Tighplunger.
Please notinstalled. S
5
Unit 1, LongmileTel: +353-1-450
p LabVIEW Manual
ringe clamp back hten the thumb
te that the syringeSee table below:
5ml Syringe
e Business Park, Lo00-155 Fax: +35
in place (Figure screw (Figure 6
e clamp is revers
Sma
ongmile Road, Dubl53-1-4500-158 Em
25
6 position 1) and position 2) to s
ible, depending o
aller Syringes
in 12, Ireland mail: info@cellixltd
d tighten the screwsecure the syrin
on the syringe to
ClampingDirection
.com
ws ge
be
g n
ExiGo Pump
10. MPOSI
In most caplacing thethe user iapproximat
1
Figure 7
5 Warninthe pump’s displacemen
Unit 1, LongmileTel: +353-1-450
p LabVIEW Manual
MOVE THEITION5 ses, the position
e syringe. In ordernterface and drote volume displac
ng: It is strongly rec
plunger. Failure tont process.
e Business Park, Lo00-155 Fax: +35
PUMP TO
of the pump after to move the pumop it to the requced during the pum
2
Fig
commended to remo do so may caus
ongmile Road, Dubl53-1-4500-158 Em
26
THE ASSAY
er initialization willmp, simply drag thuired position. Amp movement will
gure 8
move any installed sse the pump to m
in 12, Ireland mail: info@cellixltd
Y REQUIRE
l be not suitable fhe pump plunger An indicator of t appear.
syringe prior to momalfunction during t
.com
ED
for on he
ove the
ExiGo Pump
11. MThRa
1
Figure 9
1. Cli2. Se
pos3. Th
Pre4. On
Unit 1, LongmileTel: +353-1-450
p LabVIEW Manual
MANUAL ASSere are two poss
ate Units (L/min) a
Flow Rate Units
9
ck in the flow rateet the desired flowsitive or negative e introduced flowess in order tnce the flow rate h
e Business Park, Lo00-155 Fax: +35
SAY: HOW TOsibilities to set theand the other in Sh
s:
2
Figure 10
e indicator
w rate value. Use tflow rate. Click
w rate should appeto update the pum
has been set, pres
ongmile Road, Dubl53-1-4500-158 Em
27
O SET THE FLe flow rate manuahear Stress units
3
Figur
the and co to accept the c
ear now within themp flow rate set poss the RUN button
in 12, Ireland mail: info@cellixltd
LOW RATE ally. One is in Flo(dyne/cm2):
re 11
ontrols to change changes e flow rate indicatooint. n to start the assa
.com
ow
to
or.
ay.
ExiGo Pump
1
Figure 12
4
Figure 15
1. Cli2. En
use3. Ch4. Intr
chacha
5. ThindOn
6 Check the
Unit 1, LongmileTel: +353-1-450
p LabVIEW Manual
Shear Stress U
ck the Ch. Settinter the fluidic chaed;
hange the indicatoroduce the desirange to positive anges. e introduced she
dicator. Press nce the shear stre
e microfluidic chip
e Business Park, Lo00-155 Fax: +35
Units
2
Figure 13
5
Figure 16
gs Button annel dimensions6
or to dynes by clickred shear stress.
or negative she
ear stress should in order to up
ss is set press the
p manufacturer’s d
ongmile Road, Dubl53-1-4500-158 Em
28
3
Figur
6 and the viscosity
king the Shear bu. Use the aear stress. Click
d appear now wpdate the pump fe RUN button to s
datasheet
in 12, Ireland mail: info@cellixltd
re 14
y of the liquid to
utton nd controls
to accept t
within the flow raflow rate set poi
start the assay.
.com
be
to he
ate nt.
ExiGo Pump
12. EXRATE
The perforusing an Ex
Each ExiGpump at an
Once the indicator w
Figure 17
Immediatelmeasurem
Figure 18
It is possibas when ru
Unit 1, LongmileTel: +353-1-450
p LabVIEW Manual
XIGO FLOWES mance of the ExixiGo sensor to ob
Go Flow Sensor isny moment.
sensor is connecwill appear in LabV
ly after pluggingents will appear w
ble to record the munning in manual m
e Business Park, Lo00-155 Fax: +35
W SENSOR:
Go pump can bebtain a real-time flo
s plug-and-play; t
cted and recogniVIEW. Please see
g-in the ExiGo within the Manual
measured flow ramode. Please refe
ongmile Road, Dubl53-1-4500-158 Em
29
VISUALIZIN
e significantly incrow rate feedback
therefore it can b
zed by the pumpFigure 17.
Sensor, the reTab.
ates within a partier to section 14 fo
in 12, Ireland mail: info@cellixltd
G THE FLOW
reased by means .
be connected to t
p, a “Flow Senso
eal time flow ra
cular assay as wor more details.
.com
W
of
he
or”
ate
well
ExiGo Pump
13. SEIn order to fast dynam
Figure 19
7 The PID pump. If ystill use theto purchase
Unit 1, LongmileTel: +353-1-450
p LabVIEW Manual
ETTING THEget the best perfo
mic response, the P
cannot be turned you purchased ane pump without the one.
e Business Park, Lo00-155 Fax: +35
PID PARAMormance and accuPID controller mu
Prodefits orateTheincrresvaluoscleadbetwrate InteinstgivehavpurStaA lacauvalu Derprosys“prethe charedincobec
on if an ExiGo S
n ExiGo pump withe PID controller.
ongmile Road, Dubl53-1-4500-158 Em
30
METERS uracy of the ExiGost be turned on.7
oportional (P): Thines how quickly thoutput to reduce the set point minuserefore, the proporrease the speed oponse. However, ue is too large, thecillate. Using P parad to a Steady-ween desired flow e.
egral (I): The intetantaneous flow rates the accumulateve been correcterpose is to drive tate error to zero. arge value of the Inuse the system to ovue and even oscillat
rivative (D): Theportional to the ra
stem output (pump fedicts” the system
system outputanging rapidly. Thisuce overshoot andorrect value may ccome unstable.
Sensor is not connthout an ExiGo flPlease contact C
in 12, Ireland mail: info@cellixltd
o pump as well as
he proportional gahe system will chanhe existing error (Flos current flow ratrtional parameter wof the control syste
if the proportione system will begin ameter on its own mState error (offsrate and current flo
egral term sums tte error over time aed offset that shoued. Thus, its mahe flow rate Stead
ntegral parameter mvershoot the set pote.
e derivative term ate of change of tflow rate). Thereforebehaviour decreasiif the flow rate s parameter helps d settling time but cause the system
nected to the ExiGow sensor you cellix Ltd. if you wi
.com
s a
ain nge ow te). will em nal to
may set) ow
the and uld ain dy-
may oint
is the e it ing
is to an to
Go an sh
ExiGo Pump
Figure 20
How to tun
1. Se2. Inc
pu3. Inc
Intesenrecpro
4. In valachres
Unit 1, LongmileTel: +353-1-450
p LabVIEW Manual
e PID:
et all parameters tocrease P and champ is fast enough
crease gradually egral parameter nsitive and maycommended to sobably lead the sycase of a large ovlue gradually unhieved. Howeversponse of the syst
e Business Park, Lo00-155 Fax: +35
o 0. ange the set poinh without oscillatinI value in order can be any valu
y cause the systart using a valuystem to become vershoot when chntil the optimal r, a large value tem.
ongmile Road, Dubl53-1-4500-158 Em
31
nt until the dynamng. to minimize the ue between 0 anstem to oscillatue of 0.001. A vunstable. hanging the set po
ratio overshootof D may slow
in 12, Ireland mail: info@cellixltd
mic response of t
Steady-State errond 1 but it is vee. Therefore it value over 0.1 w
oint, increase thet/response time down the dynam
.com
he
or. ery
is will
e D is
mic
ExiGo Pump
14. PRWAVE
It is possibflow rates a
Figure 21
1. Cli2. Cre3. Cli4. Re
5. Clipro
14.1 WavThe wavefpump. You can ad
• Co• Ra• Tra• Sin
Unit 1, LongmileTel: +353-1-450
p LabVIEW Manual
ROGRAM EFORM le to program theand duration of a
ck “Fill Pump X” ieate your custom ck “Program Pum
epeat steps 1 to 3
ck to ogrammed pumps
veform Editor form Editor allows
dd 4 different elemonstant Flow/Pausamp ainPulses ne
e Business Park, Lo00-155 Fax: +35
MODE: D
e ExiGo pump in ocertain experimen
n order to open thWaveform and cl
mp X” button to profor the remaining
run a particular s simultaneously.
s you to create a
ments to your wavse
ongmile Road, Dubl53-1-4500-158 Em
32
DEFINING
order to have a prnt.
he Waveform Editlick OK. ogram the selecteg pumps.
pump or
a custom Wavefo
veform:
in 12, Ireland mail: info@cellixltd
A CUSTO
recise control of t
tor.
ed pump.
to run all t
orm for your ExiG
.com
M
he
he
Go
ExiGo Pump
Figure 22
Flow Rate
Duration
Unit 1, LongmileTel: +353-1-450
p LabVIEW Manual
Flow would Durati
e Business Park, Lo00-155 Fax: +35
rate set point forlike to create a pon of the constan
ongmile Road, Dubl53-1-4500-158 Em
33
r the constant steause.
nt step in minutes
in 12, Ireland mail: info@cellixltd
ep. Set to 0 if y
and seconds.
.com
ou
ExiGo Pump
Initial FlowFinal FlowDuration
Max Flow Min Flow RPeriod
RepetitionsDuty Cycle
Unit 1, LongmileTel: +353-1-450
p LabVIEW Manual
w Rate Initial w Rate Final F
Durati
Rate MaximRate Minim
Duratisecon
s Numbe Ratio
Pulse(Pulse(rate a
e Business Park, Lo00-155 Fax: +35
Flow Rate of the Flow Rate of the Ron of the ramp in
mum flow rate of thum flow rate of thon of one full cds
ber of Pulses of thebetween the max(s). For instance(s) will remain 60nd 40% of the per
ongmile Road, Dubl53-1-4500-158 Em
34
Ramp Ramp minutes and seco
he Pulse(s) he Pulse(s) cycle of the Puls
e Train Pulse Steximum and minime Duty Cycle = 60% of the periodriod on maximum
in 12, Ireland mail: info@cellixltd
onds
ses in minutes a
p mum flow rate of t60 means that td on minimum floflow rate
.com
nd
he he ow
ExiGo Pump
Amplitude
Period
RepetitionPhase
Offset
14.2 OpeYou can lobuttons:
8 The full d
Unit 1, LongmileTel: +353-1-450
p LabVIEW Manual
e Amplitand itsDuratisecon
ns NumbThe sdegreeDefineregard
en/Save custom woad and/or save a
To loadExiGo p
To save
If your wavefor
uration of the sine
e Business Park, Lo00-155 Fax: +35
tude is measured s maximum valueon of one full cyds8
ber of full cycles ofstarting angle of tes) es the position ding the zero posi
waveforms a custom wavefo
a previously savpump. e your custom wav
ExiGo pump is crm, you can retrie
e wave is determi
ongmile Road, Dubl53-1-4500-158 Em
35
between the cen
cle of the sine w
f the sine wave stthe sine wave cy
of the centre tion.
orm into your PC
ved protocol and p
veform into your c
currently programve it and modify it
ned by Period x R
in 12, Ireland mail: info@cellixltd
tre of the sine wa
ave in minutes a
tep ycle (from 0 to 3
of the sine wa
using the followi
program it into yo
computer.
med with a custot.
Repetitions
.com
ve
nd
60
ve
ng
our
om
ExiGo Pump
15. RIt is possiblog file. In o
Figure 23 1. Cli
Figure 24 2. Th
tim
Figure 25 3. Cli
crecre
4. Th Date 14/07/2014 14/07/2014 14/07/2014 14/07/2014 14/07/2014
9 The log Settings\<u10 The user11 If the recseveral loginstance: 08052014-08052014-08052014-
Unit 1, LongmileTel: +353-1-450
p LabVIEW Manual
ECORDING Tble to record the morder to generate
ck the Record Flo
e log file will be me as a filename.9
ck the Record Floeate the log file. eated e created log file
Time P15:33:46.23 815:33:46.26 815:33:46.32 815:33:46.39 715:33:46.45 8
file will be sav
user>\My Documer can modify the ficorded data becog files of smaller
161119.txt, 161119_1.txt 161119_2.txt
e Business Park, Lo00-155 Fax: +35
THE FLOW Rmeasured flow rathe log file, pleas
ow Rate Button to
created automat,10,11
ow Rate Button agThe indicator w
will have a format
ump 1 FR Pump 79.660000 ‐38.5079.660000 ‐38.5079.660000 ‐38.7538.980000 ‐20.0079.660000 ‐20.00
ved by default wents\LabVIEW Dailename after the
omes very large, tsize with a differ
ongmile Road, Dubl53-1-4500-158 Em
36
RATE DATAates during a certe complete the fo
start recording th
tically using the c
gain to stop recordill show the nam
t similar to the foll
2 FR Pump 3 FR 0000 ‐100.0000000000 18.640000 0000 ‐96.610000 0000 ‐96.610000 0000 ‐213.550000
within the path ta recording is compthe software will arent index added
in 12, Ireland mail: info@cellixltd
ain experiment inollowing steps:
he data
current date and
ding the data and me of the log file
lowing example
Pump 4 FR 0 0.000000
0.000000 0.000000 0.000000
0 0.000000
C:\Documents a
pleted. automatically crea
to its filename: f
.com
n a
nd
ate for
ExiGo Pump
Unit 1, LongmileTel: +353-1-450
p LabVIEW Manual
e Business Park, Lo00-155 Fax: +35
ongmile Road, Dubl53-1-4500-158 Em
37
in 12, Ireland mail: [email protected]
ExiGo Pump
For more service, pl
This pubcontract Limited ora particulaof the pro Every effcontents accurate informatioform the purchase liabilities f
CELLIX LiUnit 1, LonLongmile Dublin 12,Ireland Tel: +353-Fax: +353Email: infWeb: www© Cellix Ltd
Unit 1, LongmileTel: +353-1-450
p LabVIEW Manual
information on lease call:
Republic
lication is not infor computer s
r any of its subsidar application or gram should be v
fort has been mof this and all Cand correct. T
on purposes only basis of any coof the product b
for errors will be a
mited ngmile BusinessRoad,
-1-4500-155 3-1-4500-158 [email protected] d. 2005 – 2014
e Business Park, Lo00-155 Fax: +35
the ExiGo Pum
c of Ireland: +35
ntended to form software with Cdiaries. If you reqfeature, the suita
verified.
made to ensureCellix publicationshis publication isand is not intendentract for the sabeing described. accepted.
s Park,
ongmile Road, Dubl53-1-4500-158 Em
mp or any other
53 (0) 1 4500 15
any Cellix quire
ability
the s are s for ed to le or No
in 12, Ireland mail: info@cellixltd
Cellix product
55
.com
or