The oil expeller should be manually operated. One person should be able to operate the expeller. No special space should be required for the oil production. The oil production should be possible i

on the veranda. The oil expeller should be cheap and repayable within 15 to 30 oil production days of 6 hours/day

i.e. 90 to 180 processing hours. The oil expeller should require almost no spare parts and no maintenance except for daily cleaning The oil expeller should be easy to clean. The oil expeller should be fit for processing a wide variety of oilseeds. The oil extraction efficiency should be at least between 70 to 80% of the total oil or higher. The oil expeller should be low in weight to reduce transport (mailing) cost to the minimum. The oil expeller should be at a low cost level as related to its daily oil output. The oil expeller, workbench and toolbox should be integrated as one small portable unit. This en

also to move from farm to farm rather than to bring the seed to the oilseed processor. This savof the crop to increase processing capacity/hour to increase extraction efficiency to adapt theprocessing of a wide variety of oil seeds to facilitate easy cleaning.

Low cost Oil Expeller very useful to crush varieties of Nonedible & Edible seeds.It has manyforemost you can get a pure oil within minutes for more information please visit our websitewww.rajkumaragromachinery.com

PERCENTAGES

Name OfNon- Edible Seed

Karanja Mohwa Palas Jathropha Kusum Undi Pissa N

Oil Yield Per 100Kgs.

24 –28% 31 – 38% 08 – 10% 25 - 28% 30 – 34% 50 – 60% 30 – 32%

NOTE:-

1) The oil extraction percentage entirely depends on the quality and dryness of the seeds.

2) It is essential to use boiler for crushing groundnuts without husk and castor seeds.

3) Design & specification subject to change without prior notice

Name Of EdibleSeed

Ground NutWithout

Husk

GroundnutWith Husk Til Kardi Sunflower Ambadi L

Oil Yield Per 100Kgs.

40 –42% 25 – 32% 40 – 50% 20 - 25% 28 – 35% 20 – 22% 35

Name Of EdibleSeed

Mustard Khopra Jagni Castor Cotton

Oil Yield Per 100Kgs.

34 –39% 60 – 65% 35 – 38% 32 - 35% 14 – 16%

HAND OPERATED OIL EXPELLER

Website : www.rajkumaragromachinery.com

RAJKUMAR AGRO ENGINEERS PVT. LTD.Near Union Bank, Ghat Road, Nagpur – 440 018 (M.S.) (INDIA)

Tel : 0091-712-2725271, 2772570 E-mail : rajkumarexpeller@gmail.com

n the kitchen or

actual pressing,

and greasing.

ables a contractores transport costsexpeller to

advantages the

eem Seeds

12 – 16%

inseed

– 39%

OIL EXTRACTED FROM DIFFERENT KINDS OF SEEDS

Groundnut Seeds Jatropha Seeds Karanj(Pongamia) Lin seed (Flax Seed)

Mustard Seeds Palm Nut Saff Flower Seeds Soya been Sunflower Seeds

(Kardi)

Til (Seasame) Tung Seeds Almond Coconut Walnut

Oil Extracted From Hand Operated Oil Expeller

Oil Cake After Extraction of Oil From Hand Operated Oil Expeller

GEARS

Main Gear & pinion are helical cut anLong life of Gears is ensured since thThis results in smooth and noiseless w

GEAR BOX

Gear Box is fitted on the top of body a

ADVANTAGES

1) Weight of Gear Box is distributeput on the bolts.

2) Easy for fitting & maintenance.3) There are no problems of alignm

Helical cut. This result in perfec4) There is a view Glass provided i

gears and supply of oil and greas

KISAN TEL YAN

SALIENT FEATURES OF

TRA/4 BOLTS/6 BOLTS/9 BOLTS MODEL

Kisan Tel Yantra Cabinet Model

Kisan Tel Yantra Economy Model

Kisan Tel Yantra

Semi – Automatic Kisan Tel Yantracombi d Electric panel with Filter Press

BED

Complete M .S. Channel sturdy frame bed, also provided with rails formotor. These ensure complete mobility. No foundation required ifexpeller is run directly with motor. Cost of foundation work & rail formotor is saved.

HEAVY DUTY BODY

Completely leak proof sturdy steel body in single piece can beexpected to be ever lasting yet easy to open with oil bath arrangement.

BEARINGS

Total 12 Nos. of Genuine & Standard Ball and Taper Roller Bearingsare fitted in the Expeller for smooth operation.

Bearing get automatically lubricated while in operation withmovements of gears. Surplus oil and grease comes in contact withbearing, thus lubricating them for smooth working and long lifewithout wear & tear.

No oil or grease is wasted since oil seals are provided to preventleakage of oil / grease from Body.

d tempered to perfect Hardening.ey are moving in mixture of oil & grease.orking of the machine.

nd not sideways.

d on the Expeller Body & no Pressure is

ent to match the Gear teeth which aret fitting and smooth operation.n Gear Box to see movement ofe

ne

4 Bolts Cabinet Model

6 Bolts Export Model

4 Bolts Export Model

Small Qu

The Expe10 kgs. an

Space

As smallaccommo

Experien

Any Ordieasily.

Main ShaThe wearbush all mthe same.

GearsMain Geahardness

BearingsIn placesused. Thispower.

Job workThe Rajkuthe job woextractingrequired.install and

Boiler anThose whusing maiseeds etc.installed a

SALIENT FEATURES OF SUPER DELUXE MODELS

antity

ller can work even with small quantity of oil seeds says 5 tod extract oil from it.

space as 9X9 for 4 bolts and 20X15 for 6 bolts candate the Expeller Filter Press Motor and Pump.

ce

nary person with a little experience can run the machine

ftand tear parts, such as worms, collars, cone, coneade of steel and are properly case hardened to make

r and Driving Pinion Gear also of steel are given highto make them last for years.

of bushes, taper roller bearings and ball bearings arehelps the machine to run smoothly, consuming less

smar Expeller have proved to be very useful for doingrks of crushing the Oil seeds of Kisans and others andthe Oil in their presence, for which Filter Press is not

Those who having Flour Mill etc., can convenientlyoperate this expeller, using the same motor.

d Steam Kettleo wish to do the Oil business on a big scale later on,nly groundnut without husk, Cotton seeds, Castor, Boiler and Steam Kettle can conveniently bend used.

4 Bolts Super Deluxe Model

6 Bolts Super Deluxe Model

9 Bolts Super Deluxe Model

Easy t

Theseare mcapacthereiFilterM.S. btray eThe oeitherto eac

FILTER PRESS WITH PUMP

o install & ideal for utmost purification of all types of oil.

filter presses are very extensively used in oil mill, chemical works etc. our filter pressesost suitable for cleaning oil drawn from the different expelling plants. The filteringity varies with the viscosity of the oil liquids and with the amount of sediments containedn.press consists chiefly closed grained C.I. square plates, mounted parallel on heavy flatars fixed on heavy iron stand. All filter presses are supplied with brass cock, collection

tc.il or liquid pressed by a belt driven plunger pump and passed through filter cloth fitted toside of each plate. The filter cloth, the filtered oil leaves the chamber through cocks fittedh plate and flows, retain all impurities where it is collected.

Particulars of different Filter presses Manufactured by us

Size of Filter Press No. of Plates Approx. Filtrationin Litres per hour

Pressure up to lbs.per Square inch

10 X 10” 10 25 1512 X 12” 12 75 4512 X 12” 16 100 4512 X 12” 18 125 4516 X 16” 12 150 4516 X 16” 16 200 4518 X 18” 18 250 5024 X 24” 24 300 50

Specifications are subject to alteration without notice

“RAJKUMAand for othesteam for thethe small quper hour. Thper sq. inchnever in con

“RAJKUMoperate, witboiler.

All the boile

ModelRajku

Exp

I.Kisa

Ya

II. 4 - B

III. 6 - B

IV. 9 - B

STEAM BOILERS

R BOILERS” are specially made for small oil mills, which are using expellers,r small scale industries, which require steam for process work. Users of small quantityir process work require a small boiler in size. It serves economically and efficiently toantity steam users whose requirements are limited to a maximum of about 100-lbs. steame boiler is built from M.S. Plate and special boiler tubes for a working pressure of 75 lbs.and will steam efficiently and economically at lower pressure. It has all welded seams andtact with fire.

AR BOILERS” have quick steaming capacity and simple construction. They are easy toh economy of floor space coal. Wooden chips, groundnut shell, can also be used in this

rs will be supplied with complete set of mountings and fittings.

SPECIFICATIONS

mar Oileller

ChamberSize

H.P.Required

CrushingCapacity

per/hr.(Kgs.)

Main ShaftSize

Machine SizeLength Width Height

PulleyDia RPM

Weight(In Kgs.)

MainShaftRPM

n Telntra

15”X2.25” 3 10-15 32MM 3.5 FT 1.5 FT 3 FT 12” 300 150 60

olts 18”X3” 5 or 7.5 30-40 1 1/2” X49 5 FT 2 FT 4 FT 16” 240 400 45-48

olts 24”X4” 10 70-80 1 7/8”X69” 7.5 FT 3 FT 5 FT 20” 180 1000 34-36

olts 27”X5” 15 100-120 2 ½”X79” 9 FT 4 FT 6 FT 24” 180 1400 28-30

HAND

Can be oCapacit

A power okernels thequipmenextractionoperate. Tsuitable fojobwork

Capacity

Weight

H.P.

C

GROUNDNUT DECORTICATOR

OPERATED GROUNDNUT DECORTICATOR

perated by single person very efficiently.y : 20 to 30 Kgs. per hr.

perated machine is used for shelling groundnut into husks anden the husks and kernels are separated by blowers. Thist which is used for shelling groundnut to utilizing the seeds forof edible oil. The machine is easy to handle and simple tohe breakage of seeds is controlled from 2 to 5%. This machine isr medium scale commercial units for excellent performance in

/ manufacturing.

Groundnut Decorticator (without challana)

15” Model 24” Model 36” Model100-125

Kg. Per Hour250-300

Kg. Per Hour600-650

Kg. Per Hour

75 Kgs. 140 Kgs. 250 Kgs.

1 Hp SinglePhase Motor

2 Hp Single PhaseMotor

5 Hp Three PhaseMotor

Groundnut Deco(with challa

24” ModelCapacity 25

Weight

H.P. 2 H

Groundnut Decorticator(with challana)

36” Modelapacity 600-650 Kgs. Per Hour

Weight 350 Kgs.

H.P. 5 Hp Three Phase Motor

rticatorna)

0-300 Kgs. Per Hour

175 Kgs.

p Single Phase Motor