Experience Statement - Commercial Builder Limited ... · Part L: Experience Statement for Commercial Builder (limited to Structural Fit-Out work) How to fill out this statement STEP

PRACTITIONER FORM

Part L: Experience Statement for Commercial Builder (limited to Structural Fit-Out work)

How to fill out this statement

STEP 1

Read about the skills, knowledge and experience that you need to demonstrate if you are applying for registration in the category of Commercial Builder (limited to structural fit-out work).

STEP 2

Fill out table 1 and table 2:

In table 1, tell us about your general experience carrying out commercial structural fit-out work.

In table 2, tell us about three specific projects that demonstrate your experience in commercial structural fit-out work.

STEP 3

Read table 3. It explains the types of evidence that you should use to demonstrate all your experience, including the experience noted in table 2. You need to present your evidence portfolio when you lodge your application.

Remember

• Please include as much detail as possible, because this statement will be used to work out whether you have enough experience for registration.

• In your application, you will need to provide references to confirm you have completed this work.

• It is an offence under section 246 of the Building Act 1993 to give any false or misleading statement or information in your application.

• We will return your application if this statement is incomplete or doesn’t have enough detail, and ask you for more information.

© State of Victoria, Victorian Building Authority 2017 (published September 2017) 1

Statement of Experience for Commercial Builder (limited to structural fit-out work) - Page 1/20

PRACTITIONER FORM

Step 1. Learn about skills, knowledge and experience that you need

Knowledge

If you are applying to be registered in the class of Commercial Builder (limited to structural fit-out work) and you have successfully completed one of the following qualifications, including the units of competency listed below the qualifications:

· Certificate III in Shopfitting CPC30116

· Certificate III in Carpentry CPC30211

· Certificate III in Carpentry and Joinery CPC32011

Relevant units of competency include:

· Arrange building applications and approvals (CPCCBC4026A)

· Identify construction work hazards and select risk control strategies(CPCCWHS3001)

· Produce labour and material schedules for ordering (CPCCBC4005A)

· Apply building codes and standards to the construction process formedium rise building projects (CPCCBC5001B)

· Select and prepare a construction contract (CPCCBC4003A)

then you will satisfy the technical knowledge requirements for registration.

These qualifications do not include units of competency relating to applying for a building permit, nor to management of occupational health and safety, contracts or project budgets.

Experience

To assist in our assessment of whether you have the required experience for registration in this class of building practitioner, you must provide a portfolio of evidence (tables 1 and 2) that demonstrates your experience.

This portfolio should demonstrate your capacity to undertake all the activities associated with the class of Commercial Builder (limited to structural fit-out work) – in a competent manner and to a professional standard.

Your portfolio should include evidence of:

· your experience in the areas that you tick in table 1

· details for three different commercial construction projects that togetherdemonstrate your involvement in all stages of structural fit-out work,from project start to completion (table 2).

Finally, table 3 provides examples of the types of documentary evidence of your experience that you could provide.

2 Statement of Experience for Commercial Builder (limited to structural fit-out work) - Page 2/20

PRACTITIONER FORM

STEP 2. Complete table 1 to describe your general experience relating to commercial structural fit-out work.

Table 1. Fill out this table to describe all work you have done in relation to commercial structural fit-out work.

Leave blank if you have not undertaken the activity.

What type of building work have you done? Tick the box.

How many times have you done this type of work? Tick the box.

What were your exact responsibilities? Tell us if you were responsible for the work or if your role was to assist with the work.

Plan, manage, and coordinate building projects

Prepared documentation relating to an application for a building permit (if relevant)

☐ 1 – 5

☐ 6 – 10

☐ 11 +

Prepared an application to obtain the report and consent of a council, service authority, Metropolitan Fire Brigade, or Country Fire Authority

☐ 1 – 5

☐ 6 – 10

☐ 11 +

Prepared cost estimates and quotations or responses to a tender

☐ 1 – 5

☐ 6 – 10

☐ 11 +

3


PRACTITIONER FORM

Selected and prepared contracts and their associated project schedules for the building work

☐ 1 – 5

☐ 6 – 10

☐ 11 +

Managed and administered contracts for the building project

☐ 1 – 5

☐ 6 – 10

☐ 11 +

Established, monitored and managed budgets for the building work

☐ 1 – 5

☐ 6 – 10

☐ 11 +

Interpreted plans, drawings, and specifications prepared by designers, and carried out that building work in accordance with the documentation

☐ 1 – 5

☐ 6 – 10

☐ 11 +

Developed, monitored, and coordinated project progress schedules for the building work

☐ 1 – 5

☐ 6 – 10

☐ 11 +

4


PRACTITIONER FORM

Selected and managed contractors and subcontractors

☐ 1 – 5

☐ 6 – 10

☐ 11 +

Developed policies and procedures to manage and monitor health and safety requirements for the construction site and surrounds

☐ 1 – 5

☐ 6 – 10

☐ 11 +

Arranged inspections and certification of building work

☐ 1 – 5

☐ 6 – 10

☐ 11 +

5


PRACTITIONER FORM

Manage, carry out1, or arrange the carrying out of building work

Managed or arranged the establishment of the construction site. This work would usually include the establishment of:

• controls for OH&S hazards and risks

• Safe Work Method Statements (SWMSs)

• site hoarding and protection of the public

• site survey and set-out

• site logistics

• traffic management

• plant & equipment hire

• amenities

• induction processes.

☐ 1 – 5

☐ 6 – 10

☐ 11 +

Carried out the establishment of the construction site. This work would usually include the establishment of:

• controls for OH&S hazards risks

• Safe Work Method Statements (SWMSs)

• site hoarding and protection of the public

• site survey and set-out

• site logistics

• plant & equipment hire

• amenities • traffic management

• induction processes.

☐ 1 – 5

☐ 6 – 10

☐ 11 +

1 Carry out includes the undertaking and supervision of the building work.


PRACTITIONER FORM

Managed or arranged for the demolition or part demolition of existing structures on the site

☐ 1 – 5

☐ 6 – 10

☐ 11 +

Carried out the part demolition of existing structures on the site

☐ 1 – 5

☐ 6 – 10

☐ 11 +

Managed or arranged for the propping and supporting of internal structures

☐ 1 – 5

☐ 6 – 10

☐ 11 +

Carried out the propping and supporting of internal structures

☐ 1 – 5

☐ 6 – 10

☐ 11 +


PRACTITIONER FORM

Managed or arranged for the setting out, fabrication and assembly of load bearing and non-load bearing shop fronts, commercial entries and component fittings

☐ 1 – 5

☐ 6 – 10

☐ 11 +

Carried out the setting out, fabrication and assembly of load bearing and non-load bearing shop fronts, commercial entries and component fittings

☐ 1 – 5

☐ 6 – 10

☐ 11 +

Managed or arranged for the construction and erection of load bearing and non-load bearing wall and ceiling framing, including installation of internal linings, assembly of partition frames and installation of curtain walling

Carried out the construction and erection of load bearing and non-load bearing wall and ceiling framing, including installation of internal linings, assembly of partition frames and installation of curtain walling

☐ 1 – 5

☐ 6 – 10

☐ 11 +

☐ 1 – 5

☐ 6 – 10

☐ 11 +

8


PRACTITIONER FORM

Managed or arranged the manufacture, assembly and installation of stairs or alterations to stairs

☐ 1 – 5

☐ 6 – 10

☐ 11 +

Carried out the manufacture, assembly and installation of stairs or alterations to stairs

☐ 1 – 5

☐ 6 – 10

☐ 11 +

Managed or arranged for alterations to floor penetrations

☐ 1 – 5

☐ 6 – 10

☐ 11 +

Carried out alterations to floor penetrations

☐ 1 – 5

☐ 6 – 10

☐ 11 +

Managed or arranged for the addition of mezzanine floors

☐ 1 – 5

☐ 6 – 10

☐ 11 +


PRACTITIONER FORM

Carried out the addition of mezzanine floors

☐ 1 – 5

☐ 6 – 10

☐ 11 +

Managed or arranged for the installation of amenities for people with a disability, as specified in relevant documentation

☐ 1 – 5

☐ 6 – 10

☐ 11 +

Carried out installation of amenities for people with a disability, as specified in relevant documentation

☐ 1 – 5

☐ 6 – 10

☐ 11 +

Managed or arranged for the setting out, fabrication, and assembly of cabinets, showcases, wall units, counters and work stations

☐ 1 – 5

☐ 6 – 10

☐ 11 +

Carried out the setting out, fabrication, and assembly of cabinets, showcases, wall units, counters and work stations

☐ 1 – 5

☐ 6 – 10

☐ 11 +

10


PRACTITIONER FORM

Managed or arranged for the manufacture, assembly and installation of joinery unit components

☐ 1 – 5

☐ 6 – 10

☐ 11 +

Carried out the manufacture, assembly and installation of joinery unit components

☐ 1 – 5

☐ 6 – 10

☐ 11 +

Managed or arranged for the cutting and installation of glass and glazing for structural and non-structural applications, to newly constructed or existing buildings

☐ 1 – 5

☐ 6 – 10

☐ 11 +

Carried out the cutting and installation of glass and glazing for structural and non-structural applications, to newly constructed or existing buildings

☐ 1 – 5

☐ 6 – 10

☐ 11 +


PRACTITIONER FORM

Managed or arranged for the selection and installation of external cladding for structural and non-structural applications, to newly constructed or existing buildings

☐ 1 – 5

☐ 6 – 10

☐ 11 +

Carried out the selection and installation of external cladding for structural and non-structural applications, to newly constructed or existing buildings

☐ 1 – 5

☐ 6 – 10

☐ 11 +

Managed or arranged for the application of paint and other finishes, including preparation of surfaces

☐ 1 – 5

☐ 6 – 10

☐ 11 +

Carried out the application of paint and other finishes, including preparation of surfaces

☐ 1 – 5

☐ 6 – 10

☐ 11 +

12


PRACTITIONER FORM

Managed or arranged for the installation of floor coverings and the application of floor finishes

☐ 1 – 5

☐ 6 – 10

☐ 11 +

Carried out the installation of floor coverings and the application of floor finishes

☐ 1 – 5

☐ 6 – 10

☐ 11 +

Managed or arranged for the application of floor and wall tiling

☐ 1 – 5

☐ 6 – 10

☐ 11 +

Carried out the application of floor and wall tiling

☐ 1 – 5

☐ 6 – 10

☐ 11 +


PRACTITIONER FORM

Use table 2 to tell us about three specific projects that demonstrate your experience in commercial structural fit-out work.

Table 2. Fill out this table for three different projects that together demonstrate your involvement in all stages of structural fit-out work, from project start to completion.

Brief description of project – include class of building, rise in stories, and purpose of building (for example, Class 5 office building, 6 stories)

Dates of your work on the project (must include day, month, year)

Site address of building project

Building permit number(s) for the building project

Employer details: business name AND full name and contact number of your supervisor

Project 1

Start date:

End date:

Project 2

Start date:

End date:


PRACTITIONER FORM

Project 3

Start date:

End date:


PRACTITIONER FORM

STEP 3. Use table 3 to create your evidence portfolio.

Table 3. Create a table that summarises all your commercial building experience relating to structural fit-out work.

Area of experience Information that you must provide for each construction project

Manage or arrange the carrying out of all stages of commercial building work

• a brief description of the building project, including the purpose and class of the building, and the rise in stories (for example, office building, Class 5, six stories)

• the address of the building site

• the building permit number (when relevant)

• your employer for that project (business name, full name and contact number of your supervisor)

• dates of your work on the project, including day, month and year

• your role on the building project

Create an evidence portfolio that supports your commercial building experience relating to structural fit-out work for the three projects you note in table 2.

Area of experience Suggestions of documentation you could provide

Contribute to making an application for a building permit (if relevant)

• copies of documentation you prepared associated with an application for a building permit

Prepare cost estimates and budgets • plans, drawings or specifications from which you worked

• initial cost estimates that you prepared during the pre-contract phase

• documentation demonstrating your capacity to prepare cost schedules (‘take-offs’) for project material quantities and costs (for example, estimating worksheets)

• documentation demonstrating your capacity to prepare a schedule of specialist contract work required (trade breakdown)


PRACTITIONER FORM

Prepare a construction time and trade sequencing program for the building works

Evidence of a project program that you developed or contributed to, such as:

• Gantt or similar progressive charts

• critical path events

• trade sequencing

• commencement and completion dates

Assist in the selection and administration of contracts for the building work

• documentation demonstrating your capacity to select and administer commercial building contracts appropriate to the project, including:

– type of contract (simple, major works etc.)

– subcontracts

– general conditions

– legal obligations

– allowable schedules

– prime costs/variations

– others

• examples of documented processes that you implemented relating to the management and resolution of disputes

• examples of methods for managing variations in contracts you administered

• labour hire agreements that you entered into or contributed to for the carrying out of commercial building work

• examples of progress claims submitted showing progressive claims for payments as sections of the work are completed, including individual trade progress breakdowns

• policies or processes that you developed or contributed to that support compliance with contractual responsibilities, including management of disputes and quality assurance processes


PRACTITIONER FORM

Establish, monitor and manage financial plans and budgets for the project

Evidence of work that you undertook during construction or pre-construction, such as

• cash flow statements for each project or a component of each project

• a profit and loss statement for each project or a component of each project

• project financial monitoring documentation

• examples of project insurances you have administered including:

– public liability

– building works

– structural defects

– contracted works

Develop, monitor and manage occupational health and safety for construction sites and surrounds

Evidence should include:

• three examples of Safe Work Method statements (SWMSs) for each construction site

• job safety analyses for at least three different work tasks

• health and safety coordination plans for each construction site (if relevant)

• traffic management plans

• documentation related to site inductions including induction program, checklists and records management for each construction site.

Evidence may include:

• policies or procedures that you contributed to or implemented to manage health and safety

• completion of relevant OH&S certificates.


PRACTITIONER FORM

Select and manage subcontractors and licensed trades

Evidence should include:

• procedures for the recruitment of staff and contractors at required stages of each project

• contract documents or agreements used to engage staff or subcontractors

• procedures for ensuring staff and contracts hold appropriate licences/tickets, accreditation and training

• evidence that onsite training and induction was provided to staff and recorded.

Plan, coordinate and manage building work in line with architectural, designer and engineering specifications

Develop and manage project schedules for the work

• document register showing the following (as relevant) building permits, demolition permit documentation, the energy report, specifications, the design and engineering plans

• If practical, a complete set of A3 sized construction drawings and specifications for each construction project

• construction management plans that you contributed to or administered, including:

– project program charts detailing works to be undertaken, timelines and milestones for each stage of the construction work

– documentation related to your day-to-day coordination of the program of work

• documentation demonstrating application of NCC requirements, Australian Standards, and state or local statutory requirements, including the use and application of compliant building materials appropriate to the building class and type of construction

• risk management policies or procedures that you developed or contributed to, or administered

• copies of quality assurance documents and processes to ensure compliance of work and a defect-free building before handover (for example, trade compliance certificates)

• copies of handover documentation, including ‘as built’ plan updates, operations manuals etc.

• copies of relevant building surveyors inspections reports certifying works undertaken

• copies of building notices for which you were responsible for arranging work to meet a compliance requirement


PRACTITIONER FORM

Remember: The information provided in this form must be true and correct. It is an offence under section 246 of the Building Act 1993 to give false or misleading information in relation to an application for registration, and this offence carries a maximum penalty of 120 penalty units.

I declare that the information contained in this form is complete and true to the best of my knowledge. And I understand that the VBA may make enquiries to verify any of the information I have given on this form, and I consent for the information provided in this form to be shared with any other third party for that purpose.

Applicant name

Applicant signature

Date


(must be a handwritten signature)

Documents

Experience Statement - Commercial Builder Limited ... · Part L: Experience Statement for Commercial Builder (limited to Structural Fit-Out work) How to fill out this statement STEP