be certain.

Premium Pipe Connection Testing

Pipe and Connection Testing Systems

Today, oil and gas exploration requires drilling at greater depths than in the past imposing significant demands on casing and tubing connections. Industry standards API Recommended Practice 5C5 and ISO 13679 define loading and environmental conditions required for connection certification. MTS has developed testing solutions to enable you to test your casing and tubing connections to the tension and compression loads, simultaneous bending, internal and external pressures and thermal conditions defined by these specifications.

Explore MTS Testing Technology & Expertise

To satisfy strong global demand, energy companies are extending fossil

fuel exploration and recovery efforts to increasingly remote and

challenging environments.

Meeting these challenges requires a working knowledge of the

environments encountered in unexplored regions, along with a deep

understanding of the performance and durability characteristics of the

equipment and structures used to reach and recover resources. Gaining

these insights requires precise application and control of mechanical force

and motion in the test lab, along with realistic simulation of extreme

operating conditions.

MTS provides the knowledge, technology leadership and global support

necessary to help energy companies perform accurate, repeatable

mechanical testing of drilling and mining components and structures. Our

solutions also help characterize components and materials used in pipes

and pipe connections. When you choose MTS, you will be well equipped

to pursue the most promising new fossil fuel resources with speed and

confidence, and convert these fuels into energy with optimal efficiency.

Contact your local MTS Sales Representative to learn more about the

latest MTS test innovations, including:

» Pipe and Connection Testing Systems

» MTS Actuators and Hydraulic Components

» MTS High-Force Servohydraulic Test SystemsFour-Point Bend Solution

End Moment Solution

Swivel Bearings

Self-Reaching Bend Fixture and Actuator

Axial Load Cell

Axial Load Actuator

Internal

External

Compression TensionAxial Load

Pressure

Typical API RP 5C5/ISO 13679 Load Path

95% VME pipe body yield envelope

100% VME pipe body yield envelope

l

M T S E N E R G Y E X P L O R A T I O N S O L U T I O N S

All MTS structural test and simulation solutions combine advanced FlexTest® controls, easy-to-use MTS application software, robust MTS actuators and reliable MTS hydraulic power solutions to meet your most challenging test and simulation needs – now and well into the future.

High-Force Testing System Components

FlexTest Controllers

The family of MTS FlexTest Controllers allows test labs to more easily scale testing activities up or down, depending on their needs. The FlexTest controllers are based on a modular architecture that features uniquely field-upgradeable processors. The ability to upgrade the processors makes it easy to adapt the controllers to future test requirements and accommodate lab expansion and updates.

The controllers allow users to design and automate virtually any material, component or structural test including those prescribed by ISO 13679. The FlexTest Controller Family comes in various sizes and capacities: the FlexTest 40, FlexTest 60, FlexTest 100, and FlexTest 200. All provide higher channel densities and capacities, greater configurability and more setup options than previous platforms.

FlexTest controllers share common sets of hardware boards and user interface tools, which simplifies testing standardization and optimization. They are designed to run the full array of MTS application software, and include an optional, compact handset for convenient specimen installation and test setup.

MTS TestSuite™ Multipurpose Testing Software

MTS TestSuite™ Multipurpose Testing Software provides a flexible and productive environment for general-purpose testing of materials, components and structures. With applications, modules and options that are designed to be adaptable to your evolving needs, this software gives you the power to boost your lab’s efficiency and productivity.

You can easily test to specific industry standards — or pursue your own interpretation of a standard — with customizable, “plug-and-play” modules. The software also captures all setup data and test results, so you can quickly repeat tests or export data to stand-alone MTS TestSuite analysis packages and a Reporter Add-in for Excel.

Hydraulic Power Solutions

MTS SilentFlo HPUs are the cleanest and quietest hydraulic power supplies available. Capable of operating at only 58-72 dbA - below normal ambient levels commonly found in laboratory environments - they can be deployed directly in the lab, eliminating the need for special pump housing facilities and reducing supply line length and space requirements. To meet the most demanding requirements MTS offers a variety of high-capacity hydraulic power solutions.

High-Force Testing System Components

MTS Hydraulic Service Manifolds

MTS Hydraulic Service Manifolds (HSMs) provide independent pressure regulation for the precise control, isolation and distribution of hydraulic fluid to test stations.

By installing MTS HSMs into the hydraulic lines between the HPU and servovalve, you can turn each hydraulic circuit on or off and independently set low-pressure levels. This allows convenient, efficient test setup, operation and

maintenance of individual test systems without disturbing other systems.

MTS HSMs also minimize the effects of the rapid application and removal of high pressure, reducing unexpected actuator movement that could damage the test article or the test system. They also provide rapid pressure reduction to ensure safety, as well as store energy for transient events that require peak performance.

Rock and Material Test Solutions

Model 311

Model 815 Model 816

Model 64MTS Landmark™ System

High-Force Actuators

Applying unmatched engineering and test technology expertise, MTS offers a complete family of highly reliable and durable hydraulic actuators. Our high-force actuators are designed specifically to meet the demands of mechanical testing in a wide range of civil, geomechanical and structural applications.

MTS servohydraulic test systems are engineered to deliver years of reliable testing in all types of lab environments. Highly configurable, they are deployed worldwide to test civil structural components, general materials, concrete, rock and cement. By integrating extremely

stiff MTS servohydraulic load frames, FlexTest® controls, MTS test application software and a host of accessory options, these systems can be easily adapted to perform fatigue life studies, fracture growth studies, and tension, bending and compression tests.

» Double-ended or single-ended piston design

» Superior reliability and versatility » Proprietary MTS seal and bearing

designs for superior performance and life

» MTS-exclusive direct-bonded polymer bearings for reduced friction

» Hydraulic cushions to protect the end caps

MTS Systems Corporation 14000 Technology Drive Eden Prairie, MN 55344-2290 USA

Telephone: 1.952.937.4000 Toll Free: 1.800.328.2255 Fax: 1.952.937.4515

E-mail: info@mts.com www.mts.com

ISO 9001 Certified QMS

MTS fields one of the largest, most experienced worldwide service, support and consulting staff of any testing solution provider. This global team offers lifecycle management services for all your test systems to maximize your test laboratory’s productivity and help you complete test programs as quickly as possible.

Unrivaled Service & Support

Professional Services & Consulting

MTS provides expert presales support to help you design the most capable and cost-effective lab possible, and responsive post sales support to help you realize the most out of your MTS test equipment investment.

Maintenance Services & Spare Parts

The global MTS service organization fields more than 275 field service staff worldwide to deliver rapid, expert on-site service and telephone support.

MTS, FlexTest, MTS Landmark and MTS Criterion are registered trademarks, and SilentFlo is a trademark of MTS Systems Corporation in the United States. These trademarks may be protected in other countries. RTM No. 211177.

© 2013 MTS Systems Corporation. 100-277-863 Premium Pipe Connection Printed in U.S.A. 7/13

Accessories & Upgrades

MTS offers the world’s best selection of high quality testing accessories. Factory and field upgrades and rebuilds are performed by industry experts.

Lifetime System Protection

MTS helps you ensure the productive life of your MTS test equipment by offering extended warranties and software support and upgrade programs.

MTS headquarters in Eden Prairie, Minnesota