Exterior Moulding & TrimSpecial Order Items

Facts are facts and details are details.

Royal® Building Products offers

a seriously complete line of 100%

cellular PVC trim, moulding and siding

accessories. Which means you can

always rely on us for everything

from show-stealing window and

door surrounds to dormer and garage

door fascia. When it comes

to building homes that make

statements: Everything is important.

2

3

Table of Contents

Window & Door Mouldings .....................................................4

Trimplank .................................................................................6

Ceiling & Wall Mouldings ........................................................7

Decorative Mouldings .............................................................8

Garage Door Mouldings ........................................................10

Royal Trimboard.....................................................................11

Installation Tips .....................................................................12

Product Cross Reference.......................................................14

How to Place a Special Order ...............................................15

4

7526 3/0 Brick Mould Kit

2"

1 1/4"

Kit contains: 2 pc. 7' & 1 pc. 3'

7526 Brick Mould WM180

2"

1 1/4"

Lengths: 8', 10', 17'

7252 Florida Brick Mould

1 5/8"

11/16"

Lengths: 8', 10'

2590 Backband Casing

4 1/2"

1 3/16"

Lengths: 8', 12'

Window & Door Moulding

Item availability is subject to change. 5

7181 Door Frame Jamb

4 9/16"

1 1/4"

Length: 7' Length: 7'

7117 Window Sill

5 1/4"

1 1/4"

7118 Sill Nose

1 3/8"

1 5/16"

Length: 7'

2449 Drip Cap

1 5/8"

11/16"

Lengths: 8', 12'

6

7318 Trimplank 1x4

Lengths: 8', 12'

7311 Trimplank 1x6

Lengths: 8', 12', 16'

2150 Stop

Length: 12'

2709 Flat Utility Trim

Length: 8'

5 1/2"

3/4"3 1/2"

3/4"

1 1/2"

5/8"

5 13/16"

5/16"

Trimplank

7Item availability is subject to change.

Ceiling & Wall Moulding

9734 Beaded Planking

Length: 12'

2352 Exterior Planking

Lengths: 8', 12', 16'

7527 Base WM623

Lengths: 12', 16'

5 3/4"

1/2"5 15/32"

3/8"

3 1/4"

9/16"

8

Decorative Moulding

2435 Crown

Length: 12'

7158 Rams Crown

Length: 12'

7901 Shingle Mould

Length: 8'

2598 Bed Mould

Length: 12'

3 5/8"

9/16"

2"

1 13/32"

1 23/32"

21/32"

1 9/16"

9/16"

9Item availability is subject to change.

2355 Colonial Casing

Lengths: 12', 16' Lengths: 12', 16'

7719 Outside Corner

2599 Shingle Mould

Lengths: 8', 12'

2450 Base Cap

Lengths: 8', 12'

2 1/4"

11/16"

1 1/8"

1 1/8"

1 5/8"

11/16"

1 1/8"

11/16"

2018 Lattice

Length: 8'

2021 Scotia/Cove

Length: 8'

2689 Quarter Round

Lengths: 8', 12'

2024 Quarter Round

Length: 8'

2258 Quarter Round/Glass Bead

Length: 8' Length: 8'

2330 Stop

1 35/64"

1/4"

3/4"

3/4"

3/4"

3/4"1/2"

1/2"

13/32"

1/2"5/8"

5/8"

10

White Sandstone Brown

Available Colors

Garage Door Moulding

2497 Jamb*

Lengths: 7', 10'* Available in white

2149 Garage Door Stop*

Length: 12'* Available in sandstone and brown

2100 Garage Door Stop*

Length: 8'* Available in white

7526 Brick Mould WM180*

2"

1 1/4"

Lengths: 8', 10', 17'* Available in white, sandstone, brown

5 13/16"

11/16"

7/16"1 7/8" plus 1 1/4" flex

7/16"2" plus 1 1/4" flex

Garage Door Moulding

11Item availability is subject to change.

Royal Trimboard

Royal Trimboard

NOMINAL WIDTH

ACTUAL DIMENSIONS

PROFILE NUMBER

ACTUAL LENGTH

4/4 THICKNESS1" x 2" 3/4" x 1 1/2" 7832 8', 12'1" x 4" 3/4" x 3 1/2" 7834 8', 12'1" x 6" 3/4" x 5 1/2" 7835 8', 12'1" x 8" 3/4" x 7 1/4" 7836 8', 12'1" x 10" 3/4" x 9 1/4" 7837 8', 12'5/4 THICKNESS5/4" x 4" 1" x 3 1/2" 7840 10'5/4" x 6" 1" x 5 1/2" 7841 10'

1"3/4"5/8"

Royal S4S Trimboard is reversible and available in a smooth/smooth or smooth/woodgrain finish.

12

Sawing/Cutting• Royal Trim and Moulding can be cut

using the same techniques and tools as are used for wood

• Use standard woodworking equipment for most applications

• If using a power miter saw, a carbide-toothed blade with 80 teeth or more is recommended

Drilling• Drill in the same fashion as most hardwoods• Drill holes may require the removal of shavings periodically• High-speed steel bits are satisfactory for this process• Unless product is installed in lower temperatures (< 40°F) pre-drilling is

typically not required

Nailing• Use 6d and 8d galvanized nails• Place nails 12-in on center, approximately 3/4-in from

each edge• Pre-drilling is required at temperatures of 40˚ F or below• Royal Moulding and Trim can also be installed using a

pneumatic nailer, with stainless steel or painted head screws or with construction grade adhesives

Fastening:• Use fasteners designed for wood trim and wood siding (thinner shank,

blunt head, full round head) with trimboard• Use only fasteners intended for exterior use such as stainless steel or hot-

dipped galvanized.• DO NOT USE staples, small brads and wire nails• Fasteners should be long enough to penetrate the solid wood substrate a

minimum of 1-1/2 in.• Use two fasteners per every framing member for trimboard applications• Trimboards 12 in. or wider as well as sheets will require additional

fasteners• Fasteners must be installed no more than 2 in. from the end of each board• Trimboards should be fastened into a flat, solid substrate• Fastening trim boards into hollow or uneven areas must be avoided

Installation Tips

13

Gluing• To reduce or eliminate open joints, pipe glue or PVC

pipe cement is recommended • Temperature variations will cause PVC moulding to

expand and contract• It is highly recommended to splice (scarf) and/or

miter all joints

Painting• Royal Moulding and Trim requires no painting

for Rot Free protection.• 100% acrylic latex paints can be used to

achieve custom finishes• For darker custom colors (colors that fall

within the lightness (L) value of 56 to 0, with 100 being white and 0 being black), the use of heat-reflective paint is required.

Cleaning• Royal Moulding and Trim can be cleaned using any of

the recommended household cleaners listed below; however, glass cleaner has been shown to be best at keeping the finish intact

• Recommended cleaners: Windex, 409 Glass and Surface Cleaner, Spic & Span Cinch, Fantastik All Purpose, etc.

• Apply the cleaning solution and immediately wipe dry for best results

• Avoid harsh cleaners with glycol ethers, ethanol type solvents and/or isopropyl alcohol as they can soften the PVC finish if left on for several minutes

Additional Tips• Typically a paintable exterior high quality acrylic latex caulk is

recommended• When adhering Royal Trim and Moulding to wood a construction type

adhesive may be used• Royal Trimboard should always be stored in a flat level position

14

Product Cross Reference

Backband Casing .....................................2590 ......................4Base Cap ..................................................2450 ......................9Base WM623 ...........................................7527 ......................7Beaded Planking ......................................9734 ......................7Bed Mould ................................................2598 ......................8Brick Mould Kit ........................................7526 ......................4Brick Mould WM180 ...............................7526 ............... 4, 10Colonial Casing ........................................2355 ......................9Crown .......................................................2435 ......................8Door Frame Jamb ....................................7181 ......................5Drip Cap ...................................................2449 ......................5Exterior Planking .....................................2352 ......................7Flat Utility Trim ........................................2709 ......................6Florida Brick Mould .................................7252 ......................4Garage Door Stop ....................................2100 ....................10Garage Door Stop ....................................2149 ....................10Jamb ........................................................2497 ....................10Lattice ......................................................2018 ......................9Outside Corner ........................................7719 ......................9Quarter Round .........................................2024 ......................9Quarter Round .........................................2689 ......................9Quarter Round/Glass Bead......................2258 ......................9Rams Crown ............................................7158 ......................8Royal Trimboard............................................All ....................11Scotia/Cove ..............................................2021 ......................9Shingle Mould ..........................................2599 ......................9Shingle Mould ..........................................7901 ......................8Sill Nose ...................................................7118 ......................5Stop ..........................................................2150 ......................6Stop ..........................................................2330 ......................9Trimplank 1x4 ..........................................7318 ......................6Trimplank 1x6 ..........................................7311 ......................6Window Sill ..............................................7117 ......................5

Product Name Item Number Page

15Item availability is subject to change.

How to Place a Special Order

1. Browse our catalog and select the desired profiles.

2. Carefully measure to determine the needed amount of moulding.

3. Complete the form below and provide it to any associate in your local store.

Today’s Date: ______________________________________

Store Number: _____________________________________

Store Associate Name: _____________________________

Customer Name: __________________________________

Item 1

Model #: __________ Qty: _____ Color: _______________

Product Description: _______________________________

Promised Ship Date: _______________________________

Item 2

Model #: __________ Qty: _____ Color: _______________

Product Description: _______________________________

Promised Ship Date: _______________________________

Item 3

Model #: __________ Qty: _____ Color: _______________

Product Description: _______________________________

Promised Ship Date: _______________________________

Item 4

Model #: __________ Qty: _____ Color: _______________

Product Description: _______________________________

Promised Ship Date: _______________________________

Item 5

Model #: __________ Qty: _____ Color: _______________

Product Description: _______________________________

Promised Ship Date: _______________________________

royalbuildingproducts.com

© 2015 Royal Building Products