Upload
hoangcong
View
234
Download
0
Embed Size (px)
Citation preview
25.05.17
Extronics ExP R O D U C T C A T A L O G U E
ContentsWireless 3
Wireless Access Points 3
Ethernet Extender 5
iSOLATE Technology 6
Antennas 7
Antenna Accessories 11
Tracking 12
Passive RFID 12
Barcode Scanners 14
Barcode Scanners and Accessories 17
Engineering 18
Uninterruptible Power Supplies 18
Backup Power 19
Ex d Enclosures 20
Vision 22
Still Image Cameras 22
Video Cameras and Display Monitors 23
Revision Control 24
3
Tel 0845 277 5000 | [email protected] | www.extronics.com
iWAP107 Zone 1 Universal Access Point Enclosure System
• Wireless access point enclosure system• Intrinsically safe RF outputs• Explosion proof• ATEX / IECEx Zone 1 & 21 certified• US & Canada Class I Div 1 / Zone 1 certified
The iWAP107 is a fully certified access point enclosure system with intrinsically safe RF outputs, specifically designed to allow the deployment of wireless networks in hazardous areas. Choose your access point from leading WLAN vendors such as Cisco, Aruba, and Siemens; extend your existing wireless infrastructure into hazardous areas.
Product CodeThis is a configured product – for full product code, please refer to the datasheet on www.extronics.com
Wireless | Wireless Access Points
iWAP202 Zone 2 Access Point Enclosure System
• Wireless access point enclosure system• ATEX Zone 2, 21 & 22 certified• Intrinsically safe RF outputs• POE powered• IP66• 316L Stainless Steel• Choose from list of assessed access points from leading vendors or add your choice of POE AP
The iWAP202 was designed to enable wireless deployments in ATEX Zone 2 hazardous areas. Use WLAN technology from leading vendors Cisco, Aruba, Acksys, and Firetide to unlock data from your hazardous areas. You can also choose an alternative POE access point.
Product CodeThis is a configured product – for full product code, please refer to the datasheet on www.extronics.com
4
Tel 0845 277 5000 | [email protected] | www.extronics.com
Wireless | Wireless Access Points
iWAP200 Zone 2 Firetide or Acksys Access Point Enclosure
• Wireless access point enclosure system• ATEX Zone 2, 21 & 22 certified• IP66• 316L Stainless Steel• Use WLAN equipment from leading manufacturers Acksys and Firetide
The iWAP200 was designed to enable wireless deployments in ATEX Zone 2 hazardous areas. Use WLAN technology from leading vendors Acksys and Firetide to unlock data from your hazardous areas.
Product CodeThis is a configured product – for full product code, please refer to the datasheet on www.extronics.com
iWAP300 Industrial Access Point Enclosure System
• Wireless access point enclosure system• Fully rugged• IP66• 316L Stainless Steel• Choose equipment from leading WLAN vendors
The iWAP300 was designed to enable wireless deployments in harsh industrial areas, including wet and corrosive environments. Our team of engineers assesses each access point thoroughly to ensure it is suitable for purpose, enabling you to choose from the huge variety of access points on the market from leading vendors like Cisco, Aruba, and many more.
Product CodeThis is a configured product – for full product code, please refer to the datasheet on www.extronics.com
5
Tel 0845 277 5000 | [email protected] | www.extronics.com
Wireless | Ethernet Extender
Tel 0845 277 5000 | [email protected] | www.extronics.com
A290001 POE/Ethernet Extender
• Increase Ethernet cable runs in hazardous areas• ATEX and IECEx Zone 1 & 21 certified• IP66• Simple installation• Cost-effective
The A290001 is an ATEX and IECEx certified POE/Ethernet extender for use in hazardous areas. With simple installation requirements, you can also use multiple units in series to extend POE and Ethernet cable runs over greater distances.
Product CodeThis is a configured product – for full product code, please refer to the datasheet on www.extronics.com
6
Tel 0845 277 5000 | [email protected] | www.extronics.com
Wireless | Isolate Technology
iSOLATE501 Ultra-Wide Band RF Isolator
• ATEX and IECEx Zone 0, 1, 2, 20, 21, 22 & mining certified• US & Canada Class I, II, III Div 1 / Zone 1 & 21 certified• Make RF outputs intrinsically safe• High performance over ultra-wide bandwidth 150Mhz to 8Ghz• Compact design
The iSOLATE501 is an RF galvanic isolator with outputs suitable for use in Zones 0, 1, 2, 20, 21, 22 and mining applications. The unit itself may be mounted within a suitable enclosure in zone 2 and 22, or used in safe areas, such as inside other equipment. The iSOLATE501 makes most standard RF outputs intrinsically safe, so you can use non-certified antennas within hazardous areas if they meet the simple apparatus requirements laid out in the installation standards.
Product CodeISOLATE501
iSOLATE-CT Explosion Proof Connector Transit
• Works with iSOLATE501 RF isolator• Suitable for both surface and mining use• ATEX / IECEx Zone 1 & 21 certified• US & Canada Class I, II, III Div 1 / Zone 1 & 21 certified
The iSOLATE-CT makes wireless deployments in hazardous areas quicker and simpler. It works alongside the Extronics iSOLATE501 galvanic isolator, which makes RF outputs intrinsically safe, to enable easy installation and improve efficiency, helping you save time and money.
Product CodesISOLATE-CT-01 (M20 thread)ISOLATE-CT-02 (3/4" NPT thread)
7
Tel 0845 277 5000 | [email protected] | www.extronics.com
Wireless | Antennas
All Extronics iANT2xx antennas have been assessed by our engineers as simple apparatus, so can be used in hazardous areas when connected to a suitable certified wireless device with an intrinsically safe RF output, such as the iWAP107 or other solutions using the iSOLATE501. iANT2xx antennas cannot be used in hazardous areas if connected to an RF source that is not intrinsically safe.
iANT221 Directional Dual Band 2x2 MIMO Antenna
• Assessed as simple apparatus• Directional coverage• Dual band 2.4GHz and 5GHz• Combined vertical and cross polarisation• IP67 and rugged• Ideal for Wi-Fi applications with a directional focus
Product CodeIANT221
iANT212 Compact Omnidirectional Wi-Fi Antenna
• Assessed as simple apparatus• Omni-directional• 2.4GHz to 5.8GHz wide band• Ultra-compact, IP68, and fully rugged• Ideal for handheld or close deployments providing position independence
Product CodeIANT212
iANT216 Omnidirectional Dual Band Wi-Fi Antenna
• Assessed as simple apparatus• Omni-directional• Dual band 2.4GHz and 5GHz antenna• IP67 and highly rugged• Direct and remote mounting options (remote version includes stainless steel bracket)• Suitable for Groups I, II, III
Product CodesIANT216M (male plug N-type, direct mount)IANT216F (female jack N-type, remote mount)
8
Tel 0845 277 5000 | [email protected] | www.extronics.com
iANT218 Directional Dual Band 3x3 MIMO Antenna
• Assessed as simple apparatus• Dual band 2.4 and 5GHz Wi-Fi antenna• Combined vertical and cross polarised elements• IP67 and rugged• Suitable for Groups II and III• Ideal for Wi-Fi applications with a directional focus
Product CodeIANT218
Wireless | Antennas
iANT213 Omnidirectional Wi-Fi/GSM Antenna
• Assessed as simple apparatus• Omni-directional• Suitable for Groups I, II, III• IP67 and highly rugged• Available as 2.4GHz, 5GHz, and GSM options• Ideal for applications needing good general coverage• Stainless steel bracket included
Product CodesIANT213-2400 (2.4GHz)IANT213-5000 (5GHz)IANT213-QB (Quad Band GSM)
iANT214 Directional Wi-Fi Antenna
• Assessed as simple apparatus• Directional coverage• 2.4GHz and 5GHz options• Vertically polarised• IP67 and rugged• Ideally suited for point to point applications
Product CodesIANT214-2400 (2.4GHz)IANT214-5000 (5GHz)
9
Tel 0845 277 5000 | [email protected] | www.extronics.com
Wireless | Antennas
iANT215 Low Profile Omnidirectional Wi-Fi Antenna
• Assessed as simple apparatus• Omni-directional coverage• 2.4GHz - 5GHz wide band• Low profile for surface mounting• IP68 and rugged• Ideal for applications needing good general coverage
Product CodeIANT215
iANT200 Omnidirectional Wi-Fi Antenna with Cable
• Assessed as simple apparatus• Suitable for Groups I, II, III• 2.4GHz or 5GHz options, also suitable for MESH Ethernet WLAN installations• Rugged and suitable for indoor/outdoor use• Ideal for use in simple applications where good general coverage is needed
Product CodeThis is a configured product – for full product code, please refer to the datasheet on www.extronics.com
iANT217 UHF Antenna with Circular Polarisation
• UHF antenna with circular polarisation• Assessed as simple apparatus• Spherical directional pattern• 860-960 MHz• IP66 and highly rugged• Ideal for RFID applications
Product CodeIANT217
10
Tel 0845 277 5000 | [email protected] | www.extronics.com
Wireless | Antennas
iANT100 Ex e certified Zone 1 Omnidirectional Antenna
• ATEX and IECEx Zone 1 Ex e certified• Increased safety• Standard cable length 5m, shorter cables available on request• Optimised for use in 2.4GHz or 5GHz or MESH Ethernet WLAN installations• GSM variant also available• Rugged and suitable for indoor/outdoor use
Protected by the increased safety concept, the iANT100 is suitable for use in Zone 1, 2, 21, and 22 applications. It can be used with explosion proof wireless access points or the access point may be installed in a safe area and just the antenna installed in the hazardous area.
Product CodeThis is a configured product – for full product code, please refer to the datasheet on www.extronics.com
iANT101 Ex e certified Zone 1 Omnidirectional Antenna
• ATEX and IECEx Zone 1 certified• Increased safety• 5m-25m cables available• Optimised for use in 2.4GHz or 5GHz or MESH Ethernet WLAN installations• Lower frequency options also available• Rugged and suitable for indoor/outdoor use
Protected by the increased safety concept, the iANT101 is suitable for use in Zone 1, 2, 21, and 22 applications. It can be used with explosion proof wireless access points or the access point may be installed in a safe area and just the antenna installed in the hazardous area.
Product CodeThis is a configured product – for full product code, please refer to the datasheet on www.extronics.com
11
Tel 0845 277 5000 | [email protected] | www.extronics.com
Wireless | Antenna Accessories
iANTMB217 Antenna Bracket
Aluminium wall or pole mount bracket for iANT217.
Product CodeIANTMB217
12
Tel 0845 277 5000 | [email protected] | www.extronics.com
Tracking | Passive RFID
For AeroScout and active RFID tracking products, please see the Extronics Advance catalogue.
iRFID500 Handheld Bluetooth Passive UHF RFID Reader
• Available in ETSI and FCC standard versions• Fully rugged and highly durable• Industrial version OR hazardous area certified• ATEX and IECEx Zones 0, 1, 2, 20, 21 & 22 (including M1)• US and Canada Class I, II Div 1 (pending)
Lightweight and easy to use, the iRFID500 is designed to support operations such as inventory management, tracking and tracing, maintenance planning, and regulatory compliance. Connect via Bluetooth to your Android, Windows, or Apple smartphones and tablets for a greater range of functionality, or operate as a standalone device. The iRFID500 is a practical way to improve productivity and efficiency.
Product CodesIRFID50001 (Ex certified, ETSI frequency)IRFID50003 (Ex certified, FCC frequency)IRFID50005 (Industrial version, ETSI frequency)IRFID50007 (Industrial version, FCC frequency)
Demo kits:IRFID500DK1 (includes IRFID50005)IRFID500DK2 (includes IRFID50007)IRFID500DK3 (includes IRFID50001)IRFID500DK4 (includes IRFID50003)
Each unit or demo kit includes a USB charger/data cable. Additional cables available: IRFID500UC
13
Tel 0845 277 5000 | [email protected] | www.extronics.com
Tracking | Passive RFID
iTAG500 Passive UHF RFID Tag Range
• ATEX, IECEx and North American certified• Excellent read signal on, off, and near metals and liquids• Longer read ranges than previously available on a passive tag• Extremely rugged and durable tag construction• Suitable for worldwide use
The iTAG500 range of intrinsically safe, passive UHF RFID tags represents a breakthrough in asset tracking for hazardous areas, with market-leading industrial performance.
Product CodePlease see www.extronics.com for more information.
iRFID101 Fixed Zone 1 UHF RFID Reader with choice of Reader Module
• Choose your reader module from leading vendors such as SICK and CAEN• Explosion proof for use in Zone 1, 2, 21, and 22• Choice of antenna• IP66 for industrial environments
Use the iRFID101 with passive RFID tags to locate assets across the site, improving traceability and efficiency.
Product CodeThis is a configured product – for full product code, please refer to the datasheet on www.extronics.com
iRFID100 Fixed Zone 1 UHF RFID Reader with CAEN Reader Module
• CAEN reader module inside• Explosion proof for use in Zone 1, 2, 21, and 22• Up to 10m read range• Choice of antenna• IP66 for industrial environments
The Extronics iRFID100 brings RFID reader technology in hazardous areas. Use with passive RFID tags to locate assets across the site, improving traceability and efficiency.
Product CodeThis is a configured product – for full product code, please refer to the datasheet on www.extronics.com
14
Tel 0845 277 5000 | [email protected] | www.extronics.com
Tracking | Barcode Scanners
iSCAN101 Cabled Handheld Barcode Scanner
• Variants available to read all standard 1D, 2D, and stacked PDF barcodes• ATEX / IECEx Zones 1, 2, 21, and 22 certified• RS232/422 or USB interface• IP65 fully ruggedised
The iSCAN101 is a cabled handheld barcode scanner, designed for use in hazardous areas.
Product CodesISCAN101 (handset only; 1D barcodes)ISCAN101PDF (handset only; 1D and stacked PDF barcodes) ISCAN1012D (handset only; 1D, 2D, stacked PDF barcodes)
iSCAN201 2D Bluetooth Handheld Barcode Scanner
• Reads all standard 1D, 2D, and stacked PDF barcodes• ATEX / IECEx Zones 1, 2, 21, and 22 certified• RS232/422 or USB interface• IP65 fully ruggedised
The iSCAN2012D is a Bluetooth handheld barcode scanner, designed for use in hazardous areas.
Product CodeISCAN2012D (handset only; 1D, 2D, stacked PDF barcodes)
iSCAN101 Cables
Zone 1 cables for connecting the iSCAN101 handset to the power supply.
Product CodesISCAN101CAB1 (RS232, 1.8m)ISCAN101CAB2 (RS232, spiral, 3.8m)ISCAN101CAB3 (USB, 1.8m)ISCAN101CAB4 (USB, spiral, 3.8m)
15
Tel 0845 277 5000 | [email protected] | www.extronics.com
Tracking | Barcode Scanners
iSCAN211 Bluetooth Handheld Barcode Scanner
• Variants available to read all standard 1D and stacked PDF barcodes• ATEX / IECEx Zones 1, 2, 21, and 22 certified• RS232/422 or USB interface• IP65 fully ruggedised
The iSCAN211 is a Bluetooth handheld barcode scanner, designed for use in hazardous areas.
Product CodesISCAN211 (handset only, 1D barcodes)ISCAN211PDF (handset only, 1D and stacked PDF barcodes)
iSCAN2xx Bluetooth Base or Charging Station
Base station (Bluetooth connection and charging capability) or charging station (no Bluetooth connection) for the iSCAN2xx barcode scanner handsets.
Product CodesISCAN201EXB2D (Bluetooth base station, Zone 1)ISCAN201B2D (Bluetooth base station, non-Ex)ISCAN201BNOBT2D (non-Bluetooth charging station, non-Ex)
ISCAN211EXB (Bluetooth base station, Zone 1)ISCAN211B (Bluetooth base station, non-Ex)ISCAN211BNOBT (non-Bluetooth charging station, non-Ex)
iSCANPS Zone 1 Power Supply Module
• Intrinsically safe• ATEX / IECEx Zones 1, 2, 21, and 22 certified• RS232/422 or USB interface• DC 24V or AC 230V options
The iSCANPS is an intrinsically safe power supply module designed for use with the iSCAN handheld barcode scanners. It powers the iSCAN101 via a cable directly to the handset, and the iSCAN2xx via the base station.
Product CodesISCANPS1 (DC 24V, RS232)ISCANPS12D (DC 24V, RS232, for iSCAN1012D only)ISCANPS2 (DC 24V, USB)ISCANPS3 (AC 230V, RS232)ISCANPS32D (AC 230V, RS232, for iSCAN1012D only)ISCANPS4 (AC 230V, USB)
16
Tel 0845 277 5000 | [email protected] | www.extronics.com
Tracking | Barcode Scanners
iSCAN2xx Cables
Cables for connecting the iSCAN2xx base station to power supply (hazardous area charging configuration), or base/charging station to PC (safe area charging configuration).
Product CodesISCAN2XXCAB1 (RS232, 1.8m, safe area)ISCAN2XXCAB2 (RS232, spiral, 3.8m, safe area)ISCAN2XXCAB3 (USB, 1.8m, safe area)ISCAN2XXCAB4 (USB, spiral, 3.8m, safe area)ISCAN2XXCAB5 (RS232, 1.8m, Zone 1)ISCAN2XXCAB6 (RS232, spiral, 3.8m, Zone 1)ISCAN2XXCAB9 (USB, 1.8m, Zone 1)ISCAN2XXCAB10 (USB, spiral, 3.8m, Zone 1)
Power Supply for Base or Charging Station
Non-Ex power supply for iSCAN2xx non-Ex base or charging stations. DC 5V. Required if data is being transferred via RS232.
Product CodeISCAN2XXBLP
17
Tel 0845 277 5000 | [email protected] | www.extronics.com
Tracking | Barcode Scanners and Accessories
iSCAN301 1D and 2D Fixed Location Barcode Reader
• Reads standard 1D, stacked PDF, 2D barcodes• ATEX / IECEx Zones 1, 2, 21, and 22 certified• Range of interfaces for wide compatibility• Fully rugged IP66• Accurate and reliable
The iSCAN301 combines the latest 1D and 2D barcode reader technology with an ATEX and IECEx Zone 1 certified housing to give the ideal product for industrial applications.
Product CodesISCAN301D (reading distance 30-500mm)ISCAN301S (reading distance 40-1500m)
Extension Cables (RS232 only)
Extension cables with male connector, suitable for use with RS232 iSCANxxxCABx cables.
Product CodesISCANCC1 (6m, Zone 1)ISCANCC2 (spiral, 4.5m, Zone 1)
Tabletop Stand
Tabletop stand for iSCAN101 and iSCAN2xx barcode scanners.
Product CodeISCANSTAB
Tripod Stand
Tripod stand for iSCAN101 and iSCAN2xx barcode scanners.
Product Code
ISCANSTRI
18
Tel 0845 277 5000 | [email protected] | www.extronics.com
Engineering | Uninterruptible Power Supplies
iUPS101 Zone 1 Uninterruptible Power Supply
• ATEX Zone 1 certified• Provides back up power for critical equipment in hazardous areas• 230/120V AC output• Modular design, allowing for added back up time• Rugged IP66 system for industrial environments
The iUPS101 provides reliable back up power to ensure that vital equipment – such as instrumentation and control systems, navigation or landing lighting, and blow out prevention systems – remain operational in the event of a blackout or brownout.
Product CodeThis is a configured product – for full product code, please refer to the datasheet on www.extronics.com
iUPS200 Zone 2 Uninterruptible Power Supply
• ATEX Zone 2 certified• Provides back up power for critical equipment in hazardous areas• 12/24V DC output• Rugged IP66 system for industrial environments
The iUPS 200 Zone 2 UPS Enclosure is certified for use in Zone 2 hazardous areas and provides back up power for up to 120 minutes, at 70W full load.
Product CodeThis is a configured product – for full product code, please refer to the datasheet on www.extronics.com
19
Tel 0845 277 5000 | [email protected] | www.extronics.com
Engineering | Backup Power
iBATT5xx Zone 1 Universal Battery Enclosure
• ATEX/IECEx Zone 1 and Zone 2 certified• Stainless steel• Can be used to deploy various battery types in hazardous areas• Scalable solution, tailored to your application
The iBATT5xx is designed to be configured to suit your application. It is available in a wide range of sizes and will contain the batteries of your choice.
Product CodeThis is a configured product – please contact [email protected] for more information.
iBATT100 Battery Packs
Maintenance‐free 150Ah valve regulated lead acid batteries for 1 or 2 iBATT100 enclosures.
Product CodesA320016 (24V pack, 2x 12V)A320017 (48V pack, 4x 12V)
iBATT100 Zone 1 Battery Enclosure
• ATEX and IECEx Zone 1 certified• Provides battery power in hazardous areas• Highly durable and rugged• 316L stainless steel
The iBATT100 houses two 12V valve regulated lead acid batteries, connected in series, for superior performance and longer life than conventional electrolyte batteries. 24VDC, 160A max. Batteries not included.
Product CodeIBATT100
BK-EX Zone 1 Battery Box and Batteries
• ATEX & IECEx Zone 1 and 21 certified• Provides battery power in hazardous areas• Highly durable and rugged
The BK-EX is a rechargeable battery enclosure than can be used in mobile or fixed applications. Must be charged in the safe area.
Product Codes920051000 (24V Battery, 10Ah) MO02290 BK-EX Battery Charger Outlet PlugMO02988 Battery Charger for BK-EX 24V12V Battery and charger available on request
20
Tel 0845 277 5000 | [email protected] | www.extronics.com
Engineering | Ex d Enclosures
EJB Zone 1 IIB, IIB+H2 Ex d Enclosure Range, Hinged Lid
• ATEX and IECEx Zone 1 certified• Explosion proof/flameproof• Marine grade copper-free aluminium or 316L stainless steel options• IP66
The EJB Series is a range of explosion-proof enclosures for use in zone 1 and 21 environments as junction boxes with or without terminals, and to install other electrical equipment such as switches, indicators, section switches, remote control switches and transformers. These enclosures can be drilled and threaded both on enclosure walls and lids according to customer specifications.
Product CodePlease see www.extronics.com for more information.
21
Tel 0845 277 5000 | [email protected] | www.extronics.com
Engineering | Ex d Enclosures
GUB Zone 1 IIC Ex d Enclosure Range, Threaded Lid
• ATEX and IECEx Zone 1 certified• Explosion proof/flameproof• Marine grade copper-free aluminium light alloy or 316L stainless steel options• IP66
The GUB Series is a range of explosion-proof enclosures with a threaded lid for use in zone 1 and 21 environments as junction boxes with or without terminals, and to install other electrical equipment such as switches, indicators, section switches, remote control switches and transformers. These enclosures can be drilled and threaded on the enclosure walls according to customer specifications.
Product CodePlease see www.extronics.com for more information.
EJC Zone 1 IIC Ex d Enclosure Range, Hinged Lid
• ATEX / IECEx Zone 1 certified• Explosion proof/flameproof• Marine grade copper-free aluminium• IP66
The EJC Series is a range of explosion-proof enclosures with a hinged lid for use in IIC zone 1 and IIIC zone 21 environments as junction boxes with or without terminals, and to install other electrical equipment such as switches, indicators, section switches, remote control switches and transformers. These enclosures can be drilled and threaded both on enclosure walls and lids according to customer specifications.
Product CodePlease see www.extronics.com for more information.
22
Tel 0845 277 5000 | [email protected] | www.extronics.com
Vision | Still Image Cameras
iCAM502 Intrinsically Safe Autofocus Digital Camera
• ATEX and IECEx Zone 0 certified• North American Class 1 Division 1 certified (pending)• Clear images from hazardous areas• Accompanying audio records for added information• Highly rugged for use in industrial environments
The iCAM502 Autofocus is a Zone 0 intrinsically safe digital camera, the perfect visualisation tool for use in hazardous areas. Capable of taking pin-sharp images from as close as 5cm, the iCAM502 is perfect for photographing rating plates, wiring cabinets and general inspections.
Product CodeICAM502
23
Tel 0845 277 5000 | [email protected] | www.extronics.com
Vision | Video Cameras and Display Monitors
iCAM100 Compact Fixed Focus CCTV Camera
• ATEX Zone 1, 2, 21, & 22 certified• Fixed position surveillance camera• Highly rugged for use in industrial environments• Very compact for locations where space is at a premium
The iCAM100 is a fixed focus CCTV camera designed for monitoring operations in hazardous areas.
Product CodeThis is a configured product – for full product code, please refer to the datasheet on www.extronics.com
iCAM100 Bracket
Wall mounting bracket for the iCAM100 with manual pan and tilt.
Product CodeICAM100WB2
iVID101 Explosion Proof Video Monitor
• ATEX Zone 1 & 21 certified• Connect directly to CCTV cameras or video signals in hazardous areas• Highly rugged for use in industrial environments
The iVID101 is a video monitor suitable for use in hazardous areas, which can be connected to various types of video input signals.
Product CodeIVID101
Extronics Ltd. 1, Dalton Way, Midpoint 18, Middlewich, Cheshire CW10 0HU
Founded in 1992, Extronics is a leading global designer and manufacturer of intrinsically
safe and explosion proof equipment. From our UK headquarters, we serve customers that
work in potentially explosive hazardous areas and harsh industrial environments worldwide,
especially those in the oil and gas, chemical, pharmaceutical, and petrochemical industries.
Tel 0845 277 [email protected]
Revision Control
Document Number 421281, version 1.0© This document is copyright Extronics Limited 2017.Extronics reserve the right to change this document and its content without notice. The latest version applies.