Λευκωσία Ιανουαρίου - ΚΕΒΕ · 2021. 1. 8. · Information procedure Page 1 Monthly Notifications Register Notifications registered at CCMC from 2015-12-01 to

Λεωφ. Γρίβα ∆ιγενή 38 & ∆εληγιώργη 3, 1066 , Τ.Θ. 21455, 1509 Λευκωσία, Κύπρος, Τηλ. + 357-22889860, Φαξ. + 357-22665685, E-mail:[email protected], Ιστοσελίδα:www.ccci.org.cy

Λευκωσία, 15 Ιανουαρίου 2016

ΠΡΟΣ: Όλα τα Μέλη ΘΕΜΑ: December 2015 Notification Procedure 1025/2012

Κυρία/Κύριε,

Σας επισυνάπτουμε γνωστοποιήσεις από Εθνικούς Οργανισμούς Τυποποίησης, μελών των Ευρωπαϊκών Οργανισμών Τυποποίησης CEN/CENELEC, που περιέχουν τους τίτλους προτεινόμενων εθνικών προτύπων.

Σύμφωνα με την Ευρωπαϊκή Οδηγία που αφορά την πληροφόρηση σε θέματα τεχνικών προτύπων, μπορείτε, αφού μελετήσετε τους τίτλους: α) να ζητήσετε όπως λάβετε ηλεκτρονικά ολόκληρο το κείμενο του προσχεδίου εθνικού προτύπου, εάν αυτό είναι διαθέσιμο, β) να συμμετάσχετε στις συναντήσεις της τεχνικής επιτροπής του Εθνικού Οργανισμού Τυποποίησης που ετοιμάζει το προσχέδιο προτύπου και γ) να υποβάλετε εισήγηση στον CYS, να αρχίσει τυποποιητική εργασία σε Ευρωπαϊκό επίπεδο σχετικά με το θέμα της γνωστοποίησης, εάν φυσικά πιστεύετε ότι το εν λόγο εθνικό πρότυπο θα επηρεάσει την ελεύθερη διακίνηση προϊόντων ή την κυπριακή βιομηχανία και οικονομία.

Τυχόν σχόλια και παρατηρήσεις παρακαλώ όπως υποβάλλονται στον Κυπριακό Οργανισμό Τυποποίησης. Σε περίπτωση που δεν υπάρξει οποιαδήποτε ανταπόκριση, ο CYS δε θα φέρει ένσταση στην προώθηση των υπό αναφορά εθνικών προτύπων. Για περισσότερες πληροφορίες μπορείτε να επικοινωνείτε με την κα. Μαριλένα Νικολάου, Λειτουργό ∆ιοίκησης και ∆ιεθνών Σχέσεων του Κυπριακού Οργανισμού Τυποποίησης (CYS), τηλ: 22 411439, Φαξ. 22 411511 και στην ηλεκτρονική διεύθυνση: [email protected] Με εκτίμηση, Ανδρέας Ανδρέου, Αναπλ. ∆ιευθυντής Τμήματος Βιομηχανίας. για Γενικό Γραμματέα.

/ΜΚ.

Information procedure Page 1

Monthly Notifications Register

Notifications registered at CCMC from 2015-12-01 to 2015-12-31

Register issued on : 2016-01-08

A list of subsectors can be found at the end of this document.




Sector A : SERVICES


Subsector A02: CLEANING SERVICES

Subsector : A02 Registration Date : 2015-12-21Organization : ASICountry : Austria

Project ID : 00026666/0001 Project Established

ICS : 03.080.30National Ref : ÖNORM D 2040Title : Cleaning services - Training and training centres for cleaning of monuments, facades and

buildings as well as house maintenanceScope : This Austrian standard regulates the minimum standards for the training of cleaning services

of monuments, facades and buildings and house care. This Austrian standard supports learning services provider in the field of cleaning services in the fulfillment of ÖNORM ISO 29990, in particular sections 4.6 " Human resources management" and 4.8 " allocation of resources". The present ÖNORM allows to the public and private client a comparison of training in commercial cleaning in terms of the used cleaning and inspection staff.

Relatedness :National : New :



ICS : 03.080.30National Ref : ÖNORM D 2050Title : Cleaning services - Performances in square meter in the field of cleaning of monuments,

facades and buildingsScope : This Austrian standard regulates figures for cleaning services depending on the level of

cleaning, room areas and use of rooms. This Austrian standard specifies the maximum performances in square meters (m2- performances), which the employees have to provide, depending on the activities and requirements of their employers. Through a scheme under the collective agreement for monuments, facades and building cleaning, the respective m2-performance was declared for binding both the employers and employees.


Subsector : A02 Registration Date : 2015-12-18Organization : SIS Draft Issue Date : 2015-12-16Country : Sweden Latest Date for Comments : 2016-02-16


ICS : 03.080.20National Ref : 627801Title : Cleaning quality - System for the establishment and assessment of cleaning quality


** End of Subsector **

Subsector A05: MAINTENANCE SERVICES

Subsector : A05 Registration Date : 2015-12-30Organization : EVSCountry : Estonia


ICS :01.040.03, 03.080.30, 03.080.99

National Ref : prEVS 910Title : Procurement documents for property maintenace and their preparing guideScope : This National Standard defines the main concepts for property maintenace procurement.

Instructions, forms and ideas are given for rational and high quality procurement and accompanying documentation. The scope includes the following complex activities from EVS 807:2010: code 100 (administration of the property), code 200 (technical maintenance), code 300 (cleaning and waste disposal). In most cases, not many independent activities are necessary for property maintenance. The mentioned activities (administration of the property, technical maintenance, cleaning and waste disposal) are minimal to ensure safety when using the property. As a rule, the activities should be done by: - the procurer (e.g. administration of the property service, could be bought in); or - the tenderer (technical maintenance, cleaning and waste disposal). The property owner should decide on the administration type and organising (whether the services are bought in or not). This standard assumes that services are bought in. Other complex activities mentioned in EVS 807:2010 are not very universally used and depend on the specific property and the wishes of its users (e.g repairs, owner's duties, consumable services, supporting services). For this reason, these activities do not belong to the scope of this standard.



Subsector A06: BUILDING AND CONSTRUCTION SERVICES

Subsector : A06 Registration Date : 2015-12-03Organization : BSICountry : United Kingdom


ICS :National Ref : BS 1192:2007+A1:2015 A2Title : Collaborative production of architectural, engineering and

constructioninformation. Code of practice. Amendment



Subsector A09: FACILITY MANAGEMENT

Subsector : A09 Registration Date : 2015-12-15Organization : TSECountry : Turkey

Project ID : tst11686/0001 Project Established

ICS : 47.020.50National Ref :

Title : Rules for helicopter innflight refuelling (HIFR) equipment Scope : This standard covers the rules for the equipment necessary for refuelling system to

helikopter from ships.



Subsector A11: SAFETY AND SECURITY


Project ID : t1012355/0001 Project Established

ICS : 03.080.30National Ref :Title : Competent services - Floor standing boilers and combi boilers - RulesScope : This standard includes rules for operating, structural feature, technical equipment, personnel

specifications and certification of competent services of floor standing boilers and combi boilers.




ICS : 03.080.30National Ref :Title : Competent services - Devices using at safety systems - RulesScope : This standard includes rules for structural features, management, technical equipment,

personnel specifications and certification of competent services for devices using at safety systems.




ICS : 03.080.30National Ref :Title : Competent services - Uninterruptible power supplies - RulesScope : This standard includes rules for structural features, management, technical equipment,

personnel specifications and certification of competent services for uninterruptible power supplies.

Relatedness :

National : New :



ICS : 03.080.30National Ref :Title : Competent services - POS, ATM, Kiosk and Portable Terminals - RulesScope : This standard includes rules for structural features, management, technical equipment,

personnel specifications and certification of competent services for POS, ATM, kiosk and portable computer.



Subsector A99: UNDETERMINED



ICS : 03.100.01, 13.020.10National Ref : ÖNORM ISO 20400Title : Sustainable purchasingScope : This international standard provides guidance to organizations integrating sustainable

development and social responsibility within procurement, independent of their activity or size, as described in ISO 26000:2010 - Guidance on social responsibility. It is intended for stakeholders involved in or impacted by procurement decisions and processes.




ICS : 95.020National Ref :Title : Techinical characteristics of IFF MKxA and MK XII interrogators and transponders- Part

III IFF installed system characteristics Scope : This standard covers the technical characteristics of the IFF Mkx (A) and Mk XII Iinterogators

and transpanders.


Subsector : A99 Registration Date : 2015-12-21

Organization : TSECountry : Turkey


ICS : 95.020National Ref :Title : Military communications directory system Scope : This standard covers the military communications driectory system.




ICS : 03.080.30National Ref :Title : Work places - General rules for city cleaning Scope : This standard includes general rules for physical structure, management rules and personnel

characteristics of Workplaces - General rules for city cleaning .



** End of Sector **




Sector B : BUILDING AND CONSTRUCTION


Subsector B01: FIRE PROTECTION

Subsector : B01 Registration Date : 2015-12-16Organization : DINCountry : Germany


ICS :National Ref : 03100989Title : Water pool for fire fighting




ICS : 13.220.10National Ref : DIN 14461-6Title : Delivery valve installation - Part 6: Wall hydrants with flat hose for trained personnel


Subsector : B01 Registration Date : 2015-12-17Organization : ASRO Draft Issue Date : 2016-02-17Country : Romania Latest Date for Comments : 2015-04-30


ICS : 13.220.10National Ref : SR 13450-1Title : Technical means and procedures for fire fighting. Appliances for firefighting and fire

prevention. Part 1: Classification, definitions, terminology, general technical requirementsScope : This standard specifies general technical requirements for quality and how that classification,

definition and terminology used in fire fighting



Project ID : 13450216/0001 Draft for public enquiry

ICS : 13.220.10National Ref : SR 13450-2Title : Technical means and procedures for fire fighting. Appliances for firefighting and fire

prevention. Part 2: General technical quality requirements for foam tenderScope : The standard specifies general requirements for quality design and construct for special

vehicles like fire using water and foam extinguishing and specifying the classification, definition and terminology used in the field



Subsector B02: STRUCTURES

Subsector : B02 Registration Date : 2015-12-21Organization : ASICountry : Austria


ICS : 91.010.30, 91.080.10National Ref : ÖNORM B 1999-1-1Title : Eurocode 9: Design of aluminium structures - Part 1-1: General structural rules - National

specifications concerning ÖNORM EN 1999-1-1, national comments and national supplements

Scope : This ÖNORM specifies national parameters to ÖNORM EN 1999-1-1 and shall be applied jointly with ÖNORM EN 1999-1-1 in Austria.This ÖNORM applies to the design of buildings and civil engineering and structural works in aluminium. It complies with the principles and requirements for the safety and serviceability of structures, the basis of their design and verification that are given in EN 1990 - Basis of structural design.


Subsector : B02 Registration Date : 2015-12-03Organization : BSICountry : United Kingdom


ICS :National Ref : BS 8006-1:2010Title : Code of practice for strengthened/reinforced soils and other fills.

Amendment




ICS :National Ref : 03100941Title : Firefighting purposes - Escape ladder installations - Part 1: Escape ladder with and

without falling protection, holding device, platform


Subsector : B02 Registration Date : 2015-12-16

Organization : DINCountry : Germany


ICS :National Ref : 03100942Title : Firefighting purposes - Escape ladder installations - Part 2: Rescue ways on flat and

inclined roofs




ICS :National Ref : 11904034Title : Wastewater treatment plants - Principles for the design of structures and technical

equipment - Part 9: Mechanical drainage of sewage sludge



Subsector B03: CONCRETE



ICS :National Ref : BS 8500-1:2015+A1Title : Concrete. Complementary British Standard to BS EN 206. Method of specifying and

guidance for the specifier. Amendment




ICS :National Ref : BS 8500-2:2015+A1Title : Concrete. Complementary British Standard to BS EN 206. Specification for

constituent materials and concrete. Amendment




ICS :National Ref : NA to BS EN 1992-4Title : UK National Annex to BS EN 1992-4. Eurocode 2. Design of concrete structures

Part 4: Design of fastenings


Subsector : B03 Registration Date : 2015-12-15Organization : TSECountry : Turkey


ICS : 91.100.30National Ref :Title : Standard practice for selecting proportions and mix design for mass concrete Scope : Mass concrete is defined as “any volume of concrete with dimensions large enough to

require that measures be taken to cope with generation of heat from hydration of the cement and attendant volume change to minimize cracking.” The design of mass concrete structures is generally based on durability, economy, and thermal action, with strength often being a secondary, rather than a primary, concern. The one characteristic that distinguishes mass concrete from other concrete work is thermal behavior. Because the cement-water reaction is exothermic by nature, the temperature rise within a large concrete mass, where the heat is not quickly dissipated, can be quite high. Significant tensile stresses and strains may result from the restrained volume change associated with a decline in temperature as heat of hydration is dissipated. Measures should be taken where cracking due to thermal behavior may cause a loss of structural integrity and monolithic action, excessive seepage and shortening of the service life of the structure, or be aesthetically objectionable. Many of the principles in mass concrete practice can also be applied to general concrete work, whereby economic and other benefits may be realized.

Relatedness :National : NewInternational : Modified ACI 207.1R


Subsector B05: FIRE TESTS


Project ID : 10903216/0001 Published Standard

ICS : 13.220.50National Ref : STAS 10903/2Title : Fire protection. Determination of fire load in buildingsScope : The standard specifies means for evaluation of fire load in buildings

Relatedness :National : New


Subsector B08: DOORS AND WINDOWS

Subsector : B08 Registration Date : 2015-12-01Organization : AFNORCountry : France


ICS :National Ref : PR NF P26-431Title : Building hardware - Locks for building - Safety multipoint flush lock


Subsector : B08 Registration Date : 2015-12-01Organization : AFNORCountry : France


ICS :National Ref : PR NF P26-103Title : Hardware - Blocking mortice lock devices : multi-point and espagnolette locks -

Characteristics and tests




ICS :National Ref : BS 3621:2007+A3Title : Thief resistant lock assembly. Key egress. Amendment




ICS :National Ref : BS 8621:2007+A3Title : Thief resistant lock assembly. Keyless egress. Amendment




ICS :National Ref : BS 10621:2007+A3Title : Thief resistant dual-mode lock assembly. Amendment



Subsector B18: SCAFFOLDING

Subsector : B18 Registration Date : 2015-12-15Organization : TSECountry : Turkey


ICS : 55.180.30National Ref :Title : Air cargo equipment - Pallet nets Scope : This standard covers the dimensional, structural and enviromental requirements for nets

used to secure cargo on aircarf pallets.



Subsector B19: CERAMIC TILES



ICS : 91.100.50National Ref : DIN 18157-2Title : Execution of ceramic linings and coverings by thin mortar bed technique - Part 2:

Dispersion adhesives




ICS : 91.100.10

National Ref : DIN 18157-1Title : Execution of ceramic linings and coverings by thin mortar bed technique - Part 1:

Cement-based mortars




ICS : 83.180National Ref : DIN 18157-3Title : Execution of ceramic linings and coverings by thin mortar bed technique - Part 3:

Reaction resin adhesives




ICS : 91.100.25National Ref : DIN 18158Title : Clinker floor tiles



Subsector B26: ROAD BUILDING AND MAINTENANCE



ICS :National Ref : BS NA 1991-2Title : UK National Annex to Eurocode 1. Actions on structures Traffic loads on bridges

. Amendment




ICS :National Ref : BS NA to BS EN 1993-1-5Title : UK National Annex to Eurocode 3. Design of steel structures. Plated structural

elements. Amendment



Subsector B29: AGGREGATES



ICS :National Ref : 06234870Title : Testing of fillers for road construction - Stiffening effect of fillers on bitumen - Stabilization

index



Subsector B34: BUILDING AND CONSTRUCTION ENVIRONMENTAL ASPECTS

Subsector : B34 Registration Date : 2015-12-14Organization : UNMSCountry : Slovakia


ICS : 91.120.10National Ref :Title : Thermal protection of buildings. Thermal performance of buildings and components. Part

2: Functional requirements

Relatedness :National : REV/AMD STN 73 0540-2:2015 :


Subsector B99: UNDETERMINED

Subsector : B99 Registration Date : 2015-12-10Organization : SIS Draft Issue Date : 2015-12-10Country : Sweden Latest Date for Comments : 2016-02-10


ICS :National Ref : 21054Title : Area and volume of buildings - Terminology and measurementScope : I denna standard ges definitioner av area- och volymbegrepp, information om tillämpning

och omfattning, samt regler för beräkning och redovisning av area och volym hos husbyggnader och delar av husbyggnader.

Denna standard är avsedd att tillämpas vid area- och volymberäkning för alla slags husbyggnader. Den gäller för både nyproduktion och i befintligt bestånd. Den kan användas såväl vid planering och projektering som vid bygglov, taxering, värdering, hyressättning, förvaltning samt för statistisk bearbetning etc.


Subsector : B99 Registration Date : 2015-12-21Organization : ASICountry : Austria


ICS : 91.010.20, 91.060.30National Ref : ÖNORM B 2232Title : Floor topping - Contract to provide servicesScope : This Austrian Standard contains rules of procedure and terms of contract for the execution

of floor screeds. Floor constructions of prefabricated components or screeds produced outside of closed rooms are not in the scope of this Austrian Standard.


Subsector : B99 Registration Date : 2015-12-22Organization : EVSCountry : Estonia


ICS : 91.120.10National Ref : prEVS 908-1Title : Guidance for calculation of thermal transmittance of building envelope - Part 1: Opaque

building envelope in contact with outdoor-airScope : Document specifies guidance for calculation of thermal transmittance and thermal

resistance of building components and building envelope, including guidance for recommendated values of thermal transmittance for building envelope in Estonia.




ICS :National Ref : BS 8300-2Title : Design of the external environment to meet the needs of disabled people. Code

of practice




ICS :National Ref : BS 8300-1Title : Design of accessible and inclusive buildings and their approaches. Codeof

practice



** End of Sector **




Sector C : CHEMICALS, CHEMICAL ENGINEERING AND FOOD PRODUCTS


Subsector C01: Food products

Subsector : C01 Registration Date : 2015-12-21Organization : TSECountry : Turkey


ICS : 11.120.10National Ref :Title : Fennel (powdered)Scope : Fennel (powdered)




ICS : 67.120.10National Ref :Title : SausageScope : This standard spcifies sausage. İt does not cover sausages which is conserved in brine or meat

which is not mentioned in clause 0.2.1.




ICS : 67.160.20National Ref :Title : Grapefruit JuiceScope : This standard applies to grapefruit juice. It does not apply to other beverages which is

produced with grapefurit.




ICS : 67.160.20National Ref :Title : Concentrated Orange JuiceScope : Bu standard, konsantre portakal suyunu ve dondurulmuş konsantre portakal suyunu kapsar.




ICS : 67.160.20National Ref :Title : Tomato JuiceScope : This standard applies to tomato juice. It does not apply to tomato juices with spiced which is

used for preparation of cocktails.




ICS : 67.160.20National Ref :Title : Apple JuiceScope : This standard covers the apple juice. It does not cover apple concontrate and other

beverages which apple juice is used.




ICS : 67.160.20National Ref :Title : Concentrated Lemon Juice-FrozenScope : This standard covers the frozen concentrated lemon juice.




ICS : 67.100.30National Ref :

Title : Halloumi CheeseScope : This standard concerns only halloumi cheese




ICS : 03.080.30National Ref :Title : Internet service providing - Terms and definitionsScope : This standard includes, terms and definitions used for internet service providing.




ICS : 03.080.30National Ref :Title : Internet service providing – General rulesScope : This standard includes, rules for technical properties required for internet service providing,

informations should be provided, basic services and services should be given on network and legal responsibility.



Subsector C02: PAINTS AND RELATED PRODUCTS

Subsector : C02 Registration Date : 2015-12-21Organization : ASICountry : Austria


ICS : 87.040National Ref : ÖNORM C 2350Title : Coating materials for coating systems applied on dimensionally stable exterior building

constructions of wood - Minimum requirements and testsScope : This ÖNORM describes minimum requirements and tests for coating materials which are

intended to be applied on wood surfaces using manual and/or industrial processes and for coatings made thereof on dimensionally stable wooden outdoor buildings components according to ÖNORM B 3803 to protect against weathering and for decorative purposes.




ICS : 87.040National Ref :Title : Undercoat and Putty-Olearesinous BasedScope : This standard covers oleore sinous based undercoots and putty which is applied generally on

metal surfaces before topcoat paint application.

Relatedness :National : NewInternational : Modified JIS K 5400:1990












Subsector C11: TOBACCO

Subsector : C11 Registration Date : 2015-12-21Organization : PKNCountry : Poland


ICS : 01.040.65, 65.160National Ref : prPN-A-99000Title : Tobacco and tobacco products -- VocabularyScope : The terms, together with their definitions, used in the processing of tobacco and

manufacturing of tobacco products and testing of tobacco and tobacco products are specified, there are concerning with: tobacco and tobacco leaves, tobacco curing methods, tobacco processing and tobacco products



** End of Sector **




Sector F : FUNDAMENTAL STANDARDS


Subsector F05: MEASURING INSTRUMENTS

Subsector : F05 Registration Date : 2015-12-21Organization : TSECountry : Turkey


ICS : 49.080National Ref :Title : Aerospace - Fluid systems and components - Pressure and temperature classifications Scope : This standard covers the fluid systems and components for pressure and temperature

classifications in aerospace.



Subsector F07: DOCUMENTATION AND INFORMATION

Subsector : F07 Registration Date : 2015-12-03Organization : BSICountry : United Kingdom


ICS :National Ref : BS 8888Title : Technical product documentation and specification



Subsector F12: INFORMATION PROCESSING SYSTEMS

Subsector : F12 Registration Date : 2015-12-01Organization : AFNORCountry : France


ICS :National Ref : PR XP P99-508Title : Public transport - Generic Multiservice Application



Subsector F13: ENVIRONMENTAL TESTS

Subsector : F13 Registration Date : 2015-12-21Organization : TSECountry : TurkeyProject ID : tst11843/0001 Project

EstablishedICS : 19.040National Ref :Title : Environmental conditions test methods and engineering guidelines – High temperature

(military purpose) Scope : This standard covers the method of determining the effects of high temperature on the

operation copabilitiy of the materials such as very type of guns, vechiles, equipment, apparatus etc.



Subsector F15: MATERIAL TESTING IN GENERAL

Subsector : F15 Registration Date : 2015-12-16Organization : DINCountry : Germany


ICS :National Ref : 06234891Title : Thermal analysis (TA) - Terms



Subsector F20: QUALITY ASSURANCE

Subsector : F20 Registration Date : 2015-12-21Organization : IPQ Draft Issue Date : 2015-12-15Country : Portugal Latest Date for Comments : 2016-01-15


ICS : 03.120.10National Ref : prNP 4547Title : Management systems of integrated continuing care units of internment. RequirementsScope : This International Standard specifies requirements for a quality management system where

an organization: a) needs to demonstrate its ability to consistently, provide a service that meets the customer's requirements, statutory and regulatory requirements; b) aims to enhance customer satisfaction through the effective application of the system, including processes for continual improvement of the same and to ensure compliance with customer requirements, statutory and regulatory requirements. All requirements of this International Standard are generic and are intended to apply to all organizations, integrated continuous care inpatient units




ICS : 03.120, 03.180, 33.080National Ref : prNP 4545Title : ECBCheck quality evaluation model for courses and programmes with a strong

component in e-learning. RequirementsScope : This standard describes the technical requirements to be observed in the promotion of

courses and programmes with a strong component in e-learning. This standard aims to raise the quality levels of service delivery and accountability of organizations operating in the market with this type of services, measures the degree of success of courses and programmes and supports continuous improvement. It can be used both by the organization itself for the purposes of self-assessment, such as external entities for the purpose of certification services. This standard applies to any promoter organization of education and training with strong emphasis on e-learning, regardless of their size, geographic location, legal status (public or private) and commercial purposes (with or without profit).



Project ID : A0331501/0001 Draft for public enquiry

ICS : 03.120.10National Ref : prDNP TS 4546Title : Recognition system of the service quality of small and médium-sized enterprises in trade

and services sectorScope : This technical specification defines the model of the recognition system and it is applied to

SME´s from Trade and Services sector, whatever the nature of traded goods and services


Subsector : F20 Registration Date : 2015-12-15Organization : TSECountry : Turkey


ICS : 13.120National Ref :Title : Mutual acceptance of government quality assurance (military) and the usage rules of

allied quality assurance publications Scope : Standard covers mutual acceptance of government quality assurance (military) and the

usage rules of allied quality assurance publications



Subsector F21: VALUE ANALYSIS AND PROJECT NETWORK

Subsector : F21 Registration Date : 2015-12-30Organization : EVSCountry : Estonia


ICS :03.060, 03.080, 91.040, 93.010

National Ref : prEVS 875-6Title : Property valuation - Part 6: Valuation for lending purposesScope : Current standard is based on the IVSC and the EVS latest standard and is aiming to support

consistency in valuation for lending purposes. The standard also gives further explanations to meet national regulation.




ICS :03.060, 03.080, 91.040, 93.010

National Ref : prEVS 875-7Title : Property valuation - Part 7: Reviewing of valuationsScope : Current standard is providing rules and suggestions when reviewing of the other valuation

report has to be considered. The standard is based on the IVSC and the EVS latest version.




ICS :03.060, 03.080, 91.040, 93.010

National Ref : prEVS 875-13Title : Property Valuation - Part 13: Consideration of environmental risks, land use restrictions

and nature protection in property valuationScope : Current standard is aiming to provide consistency in analysing market value in relation with

environment restrictions. The standard provides the comments and suggestions related to the use of comprehensive environmental regulation when the purpose is market value for financial statements, loan collaterals, etc



Subsector F99: UNDETERMINED

Subsector : F99 Registration Date : 2015-12-03

Organization : ASROCountry : Romania

Project ID : 010000-4/0001 Project Established

ICS : 01.120National Ref : SR 10000-4:2012/A91:2015Title : Principles and methodology of standardization. Part 4: Presentation form of Romanian

standards

Relatedness :National : REV/AMD SR 10000-4:2012 :

Subsector : F99 Registration Date : 2015-12-03Organization : BSICountry : United Kingdom


ICS :National Ref : BS 8001Title : Framework for implementing the principles of the circular economy

inorganizations. Guide



** End of Sector **




Sector H : PRODUCTS FOR HOUSEHOLD AND LEISURE USE


Subsector H04: SPORTS EQUIPMENT

Subsector : H04 Registration Date : 2015-12-01Organization : AFNORCountry : France


ICS :National Ref : PR XP S56-207 Title : Hygiene of sand-pits. Requirements and test methods.




ICS :National Ref : PR NF P90-209Title : sports halls for martial arts



Subsector H09: FURNITURE

Subsector : H09 Registration Date : 2015-12-21Organization : ASICountry : Austria


ICS : 97.140National Ref : ÖNORM A 1640Title : Furniture for children in kindergartens and crèches - Dimensions and designScope : This ÖNORM specifies dimensions and design for children furniture in kindergartens and

crèches independent from the material (e.g. wood, plastics).



Subsector H19: NON-ELECTRIC COOKERS AND BARBECUES

Subsector : H19 (Secondary Subsector)

Registration Date : 2015-12-31



ICS : 13.220.20, 47.040, 47.060

National Ref :Title : Compensators - Steel expansion joints for gas pipe lines and installationsScope : This standard, covers compesators from steel used in gas pipelines and installation for

combustible gases (natural gas, citypas, LPG and mixed pases).

Relatedness :National : NewEuropean : Modified DIN 30681:2013


Subsector H33: FOOTWEAR (EXCLUDING PROTECTIVE FOOTWEAR)



ICS :National Ref : S52-011Title : Public swimming pool ¿ Treatment of swimming pools with ozone ¿ General safety

requirements and test methods



Subsector H99: UNDETERMINED

Subsector : H99 Registration Date : 2015-12-21Organization : ASICountry : Austria


ICS :13.060.01, 13.060.25, 97.220.10

National Ref : ÖNORM M 6217Title : Swimming pools - Internal supervision, maintenance and preventive servicing of water

treatment plantsScope : This ÖNORM specifies the scale, minimum requirements and the frequency of on-site

monitoring of water treatment in swimming and bathing pools.



** End of Sector **




Sector I : MECHANICAL ENGINEERING


Subsector I01: SCREW THREADS

Subsector : I01 Registration Date : 2015-12-23Organization : TSECountry : Turkey


ICS : 21.040.10National Ref :Title : Fasteners-ISO Metric Screw Threads-Section: 24-Limits of Sizes For Fine Screw

Threads Within the Range 53 to 110 mm Nominal Diameter, Together, Together With the Commonly Used Tolerance Classes

Scope : This standard covers the limit of sizes, defined according to the tolerance classes, generaily used for ISO metric fine pitch screw threads with nominal diameters of 53 mm-110 mm which their basie profile is apprapriate to TS 61-20 for the smallest value given in TS 61-15 Rmin=0,125=P=H/7 and for the highest value the root radius.

Relatedness :National : NewEuropean : Modified DIN13-24:2005



ICS : 21.040.30, 75.200National Ref :Title : Line Pipe ThreadsScope : This specification covers the threads of line pipe used for the transport of petroleum

products and natutral gas, threads of couplings threads of various connection elements, and threads of accessories and instruments to be connected on the pipe line.

Relatedness :National : NewInternational : Modified API SPEC 5B:2008



ICS : 21.040.20National Ref :Title : Unified screw threads- Nominal diameters below 1/4" - Nominal Dimensions and

tolerancesScope : This standard covers the unified screw threads having diameters of 1/4 " and below

Relatedness :National : NewEuropean : Modified BS 1580-1:2007












Subsector I02: FASTENERS

Subsector : I02 Registration Date : 2015-12-21Organization : ASICountry : Austria


ICS : 21.060.40National Ref : ÖNORM M 5300Title : Rivets - Technical specificationsScope : This ÖNORM contains technical specifications for all standardized rivets, except blind rivets

and studs for the field of aerospace. In addition to the information in the product standards rivets can be clearly identified through this technical specifications and the testing and acceptance can be set. For the supply of non-standardized rivets the application of this ÖNORM between client and contractor can be agreed.


Subsector : I02 Registration Date : 2015-12-16Organization : DINCountry : Germany


ICS : 21.060.10National Ref : DIN 267-2Title : Fasteners - Technical specification, surface roughness for product classes A and B




ICS : 01.040.21National Ref : DIN 918Title : Fasteners - Terminology, spelling of terms, abbreviations




ICS : 43.040.10, 95.020National Ref :Title : Electrical connectors between tractors and for military purposesScope : This standard covers the electrical connectors between tractors and trailer for military

purposes.



Subsector I04: ROLLING BEARINGS



ICS :National Ref : 11800488Title : Rolling bearings - Cylindrical roller bearings - Part 1: Single row with cage, separate

thrust collars




ICS :National Ref : 11800491Title : Rolling bearings - Testing conditions for the experimental verification of the dynamic load

rating of recirculation linear motion balls or roller bearings consisting of carriage and

profiled rails



Subsector I06: PRESSURE VESSELS

Subsector : I06 Registration Date : 2015-12-22Organization : BSI Draft Issue Date : 2015-12-16Country : United Kingdom Latest Date for Comments : 2016-02-29


ICS :National Ref : PD 5500:2015+A2Title : PD 5500 AMD2. Specification for unfired fusion welded pressure vessels.

Amendment




ICS : 23.020.10, 47.040National Ref :Title : Vessel Supports - for Vertical Tanks - Dimensions, Rules of Construction and CalculationScope : This standard contains construction and calculation rules of vessel supports for vertical

tanks.

Relatedness :National : NewEuropean : Modified DIN 28081-1:2015



ICS : 23.020.10, 47.040National Ref :Title : Vessel Supports - for Vertical Tanks - Dimensions, Rules of Construction and CalculationScope : This standard contains construction and calculation rules of vessel supports for vertical

tanks.

Relatedness :National : NewEuropean : Modified DIN 28083-1:1987



ICS : 13.220.20, 47.040, 47.060National Ref :Title : Compensators - Steel expansion joints for gas pipe lines and installationsScope : This standard, covers compesators from steel used in gas pipelines and installation for

combustible gases (natural gas, citypas, LPG and mixed pases).

Relatedness :National : NewEuropean : Modified DIN 30681:2013


Subsector I09: SMALL TOOLS

Subsector : I09 (Secondary Subsector)




ICS : 03.080.30National Ref :Title : Internet service providing - Terms and definitionsScope : This standard includes, terms and definitions used for internet service providing.


Subsector : I09 (Secondary Subsector)




ICS : 03.080.30National Ref :Title : Internet service providing – General rulesScope : This standard includes, rules for technical properties required for internet service providing,

informations should be provided, basic services and services should be given on network and legal responsibility.



Subsector I18: MINING



ICS :

National Ref : 00802343Title : Rope end fitting in abutments for guide ropes - Safety requirements and testing



Subsector I21: CHAINS AND CHAIN WHEELS

Subsector : I21 Registration Date : 2015-12-01Organization : AFNORCountry : France


ICS :National Ref : PR NF E26-020Title : Welded link chain round steel non calibrated non tested



Subsector I27: EARTH MOVING AND CONSTRUCTION EQUIPMENT



ICS : 53.100National Ref :Title : Earth Moving Machinery -Bushings for Crawler TracksScope : This standard covers the bushings for the crawler tracks of the earth moving machinery.



Subsector I28: FLUID POWER

Subsector : I28 Registration Date : 2015-12-01Organization : AFNORCountry : France


ICS :National Ref : PR NF E48-652Title : Hydraulic fluid power. Fluids. Determination of overall particulate contamination by the

gravimetric method.

Relatedness :National : REV/AMD NF E48-652:199011 (E48-652) :


Subsector I99: UNDETERMINED



ICS : 49.100, 75.160.20National Ref :Title : Aircraft arresting systemsScope : This standard covers the aircraft arresting systems used in military airports.



** End of Sector **




Sector M : METALLIC MATERIALS


Subsector M01: STEEL

Subsector : M01 Registration Date : 2015-12-21Organization : ASICountry : Austria


ICS : 53.080, 97.130.10National Ref : ÖNORM B 4903Title : Multi-tier shelving installationsScope : This ÖNORM applies for the construction, execution and use of multi-tier shelving

installations, which are built independently from buildings into buildings.


Subsector : M01 Registration Date : 2015-12-03Organization : BSI Draft Issue Date : 2015-11-26Country : United Kingdom Latest Date for Comments : 2016-01-24


ICS :National Ref : BS 4449:2005+A2:2009Title : BS 4449 AMD3. Steel for the reinforcement of concrete. Weldable reinforcing

steel. Bar, coil and decoiled product. Specification. Amendment



Subsector M15: METALLIC CORROSION

Subsector : M15 Registration Date : 2015-12-16Organization : DINCountry : Germany


ICS :National Ref : 06234896Title : Vitreous and porcelain enamels - Low-voltage test for detecting and locating defects on

profiled surfaces - Slurry test



Subsector M18: METAL WIRE PRODUCTS

Subsector : M18 Registration Date : 2015-12-15Organization : TSECountry : Turkey


ICS : 95.020

National Ref :Title : The multi-Channel Tactical digital gateway signalling standards Scope : This standard covers the multi channel tactical digital gateway signalling standards.



Subsector M99: UNDETERMINED

Subsector : M99 Registration Date : 2015-12-16Organization : DINCountry : Germany


ICS :National Ref : 14500111Title : Sintered metal materials - Sintered-material specifications - Part 4: Materials for structural

parts



** End of Sector **




Sector N : NON-METALLIC MATERIALS


Subsector N01: PAPER AND BOARD

Subsector : N01 Registration Date : 2015-12-16Organization : DINCountry : Germany


ICS :National Ref : 07400253Title : Testing of paper and board - Determination of the smoothness by the Bekk method



Subsector N03: PETROLEUM PRODUCTS



ICS :National Ref : 06234913Title : Testing of lubricants - Tribological test in the translatory oscillation apparatus - Part 2:

Determination of friction and wear data for lubricating oils



Subsector N05: TEXTILES

Subsector : N05 Registration Date : 2015-12-03Organization : BSICountry : United Kingdom


ICS :National Ref : BS 4060:2006Title : Pressed Wool Felts. Specification. Corrigendum


Subsector : N05 Registration Date : 2015-12-08Organization : TSECountry : Turkey


ICS : 97.160National Ref :Title : Quilt Scope : This standard specifies the description, classification and characteristics, sampling, inspection

and marketing of quilt




ICS : 97.160National Ref :Title : Aleze for mattress and pillow Scope : This standard specifies the description, classification and characteristics, sampling, inspection

and marketing of aleze for mattress and pillow




ICS : 59.080.30National Ref :Title : Non-woven feltsScope : This standard specifies the description, classification and characteristics, sampling, inspection

and marketing of non-woven felts.




ICS : 97.160National Ref :Title : Pique Scope : This standard specifies the description, classification and characteristics, sampling, inspection

and marketing of pique




ICS : 97.160National Ref :Title : Viscoelastic foam mattressScope : This standard specifies the description, classification and characteristics, sampling, inspection

and marketing of viscoelastic foam mattress.




ICS : 59.060.20National Ref :Title : Textiles - Polyester fiber - SpecificationsScope : This standard specifies the description, classification and characteristics, sampling, inspection

and marketing of polyester fiber




ICS : 59.060.10National Ref :Title : Standard Practice for Core Sampling of Raw Wool in Packages for Determination of

Percentage of Clean Wool Fiber PresentScope : This standard covers a procedure for obtaining samples from lots of grease, pulled, or

scoured wool or related animal fibers in bales or bags for the determination of the clean wool fiber present

Relatedness :National : NewInternational : Modified ASTM D1060-10:2010



ICS : 59.080.30National Ref :Title : Textiles - Woollen woven fabrics - For use in outerwear Scope : This standard specifies the description, classification and characteristics, sampling, inspection

and marketing of woollen woven fabrics for use in outerwear .




ICS : 97.160National Ref :Title : Foam mattressScope : This standard specifies the description, classification and characteristics, sampling, inspection

and marketing of foam mattress.




ICS : 61.020National Ref :Title : Textiles-Bathrobe Scope : This standard specifies the description, classification and characteristics, sampling, inspection

and marketing of bathrobes




ICS : 59.080.30National Ref :Title : Textile - Sportswear Fabrics - For Men and Boys - Knitted Scope : This standard specifies the description, classification and characteristics, sampling, inspection

and marketing of sportswear fabrics for men and boys knitted outerwear.



Subsector N09: PLASTICS



ICS :National Ref : 05401740Title : Plastics warning device for underground cables and pipelines - Part 3: Detectable tape




ICS : 83.140.99National Ref :Title : Plastics moulded parts- Tolerances and acceptance conditionsScope : This standard is about plastics moulded parts and their tolerances

Relatedness :National : NewEuropean : Not Equivalent to DIN 16742:2013



ICS : 91.100.25National Ref :Title : Glazed bricksScope : This standard specifies the definition, classification and properties, sampling, testing and

marking of glazed brick units.



Subsector N10: CORK

Subsector : N10 Registration Date : 2015-12-04Organization : IPQ Draft Issue Date : 2015-11-16Country : Portugal Latest Date for Comments : 2015-12-16


ICS : 55.100, 79.100National Ref : prNP 2803-3Title : Cork stoppers. Physical tests. Part 3: Relaxation testScope : This part of the Portuguese Standard 2803 specifies a test method for determining the

relaxation force of the cylindrical natural and colmated cork stoppers, agglomerated cork stoppers, agglomerated cork stoppers with natural cork discs ("n" + "n") multi-pieces and agglomerated cork stoppers for sparkling and gaseous wines



Subsector N13: LEATHER



ICS : 59.140, 59.140.30National Ref :Title : Box-Calf and Rind-Box (Chrome Tanned Upper Leather)Scope : This standard specifies the description, classification and characteristics, sampling, inspection

and marketing of Box-Calf and Rind-Box.



** End of Sector **




Sector S : HEALTH, ENVIRONMENT AND MEDICAL EQUIPMENT


Subsector S01: ACOUSTICS AND SOUND INSULATION

Subsector : S01 Registration Date : 2015-12-21Organization : ASICountry : Austria


ICS : 91.120.20National Ref : ÖNORM B 8115-4Title : Sound insulation and room acoustics in building construction - Calculation of

characteristic values for building acoustics and instructions for designScope : This Austrian Standard includes instructions for the calculation of characteristic values for

room acoustics on the basis of existing international regulations. Furthermore, it gives planning and design instructions for building parts and combinations thereof. The methods and construction references presented constitute the basis for evidence of the implementation of requirements for building acoustics and/or of the assessment of technical sound suitability for building constructions.



Subsector S04: PROTECTIVE CLOTHING AND EQUIPMENT

Subsector : S04 Registration Date : 2015-12-03Organization : SIS Draft Issue Date : 2015-12-03Country : Sweden Latest Date for Comments : 2016-03-03


ICS : 11.140National Ref : 8760020Title : Healthcare textiles - Mattresses - Specifications and requirements


Subsector : S04 Registration Date : 2015-12-18Organization : SISCountry : Sweden Latest Date for Comments : 2016-02-14


ICS : 11.140National Ref : 8760034Title : Health care textiles - Operating textiles - Operating theatre drapes (sterile)Scope : This standard specifies requirements for sterile drapes intended to be used in operating

theatre




ICS : 11.140National Ref : 8760035Title : Health care textiles - DrapesScope : This standard specifies requirements for not sterile drapes intended for hospital use



Subsector S07: ANAESTHETIC AND RESPIRATORY EQUIPMENT



ICS : 11.040.10National Ref : 8752430Title : Medical gas pipeline systems – Connectors for medical gases



Subsector S09: WATER QUALITY AND WATER SUPPLY



ICS : 13.060.01National Ref : ÖNORM ISO/TS 13530Title : Water quality - Guidance on analytical quality control for chemical and physicochemical

water Analysis (ISO/TS 13530:2009)Scope : ISO/TS 13530 provides comprehensive guidance on within laboratory and between

laboratory quality control for ensuring the production of results with a known level of accuracy in the analysis of waters. ISO/TS 13530:2009 is applicable to the chemical and physicochemical analysis of all types of waters. It is not intended for application to the analysis of sludges and sediments (although many of its general principles are applicable to such analysis) and it does not address the biological or microbiological examination of water. Whilst sampling is an important aspect, this is only briefly considered.




ICS : 13.060.70National Ref : ÖNORM M 6239Title : Sampling methods and devices for benthic fauna of inland watersScope : This ÖNORM specifies technical requirements for the selection of sampling-methods and

devices (design, handling and field of application) for the assessment of soil fauna of inland waters.




ICS : 13.060.10, 13.060.70National Ref : ÖNORM M 6232Title : Guidelines for the ecological study and assessment of rivers (bilingual edition)Scope : This Austrian Standard (ÖNORM) defines requirements to conduct ecological studies and

assessments of the state in permanently or temporarily flowing surface waters.




ICS : 13.060.10, 13.060.70National Ref : ÖNORM M 6231Title : Guidelines for the ecological survey and evaluation of stagnant surface watersScope : This Austrian Standard (ÖNORM) defines requirements to conduct ecological studies and

assessments of the state in standing surface waters.


Subsector : S09 Registration Date : 2015-12-15Organization : TSECountry : Turkey


ICS : 13.060.30National Ref :Title : Ultrafiltration Modules – Used in water treatmentScope : This standard specifies definition, classification and specifications, sampling, inspection and

test methods and supplying on market of ultrafiltration modules in water treatment.



Subsector S15: SURGICAL INSTRUMENTS

Subsector : S15 Registration Date : 2015-12-16Organization : DINCountry : Germany


ICS :National Ref : 02702832Title : Medical instruments - Tenaculum forceps 1 × 1 teeth, straight




ICS :National Ref : 02702833Title : Medical instruments - Vulsellum forceps 2 × 2 teeth, straight




ICS :National Ref : 02702834Title : Medical instruments - Intestinal forceps type Allis




ICS :National Ref : 02702835Title : Medical instruments - Dressing forceps type Maier, straight


Subsector : S15 Registration Date : 2015-12-16Organization : DIN

Country : Germany


ICS :National Ref : 02702836Title : Medical instruments - Dressing forceps type Maier, curved




ICS :National Ref : 02702840Title : Medical instruments - Abdominal retractor type Fritsch




ICS :National Ref : 02702844Title : Medical instruments - Dressing forceps




ICS :National Ref : 02702845Title : Medical instruments - Organ grasping forceps




ICS :

National Ref : 02702846Title : Medical instruments - Kidney stone forceps type Randall




ICS :National Ref : 02702847Title : Medical instruments - Gall stone forceps type Desjardins




ICS :National Ref : 02702850Title : Medical instruments - Bone holding forceps Farabeuf's




ICS :National Ref : 02702853Title : Medical instruments - Bone cutting forceps type Liston




ICS :National Ref : 02702854Title : Medical instruments - Rongeur type Stille

Relatedness :

National : New :



ICS :National Ref : 02702855Title : Medical instruments - Rongeur type Ruskin




ICS :National Ref : 02702856Title : Medical instruments - Rongeurs type Luer




ICS :National Ref : 02702857Title : Medical instruments - Rongeur type Beyer




ICS :National Ref : 02702865Title : Medical instruments - Needle holder type Heaney




ICS :National Ref : 02702866Title : Medical instruments - Neddle holder type De Bakey with carbide inserts




ICS :National Ref : 02702867Title : Medical instruments - Haemostatic forceps type Adson




ICS :National Ref : 02702869Title : Medical instruments - Sponge holding forceps type Förster




ICS :National Ref : 02702870Title : Medical instruments - Dissecting forceps type Adson


Subsector : S15 Registration Date : 2015-12-16Organization : DINCountry : GermanyProject ID : 02702872/0001 Project

EstablishedICS :National Ref : 02702872Title : Medical instruments - Needle holder type Mathieu - Part 2: With carbide inserts




ICS :National Ref : 02702873Title : Medical instruments - Dissection forceps - Part 2: Curved




ICS :National Ref : 02702874Title : Medical instruments - Tissue forceps - Part 2: Curved




ICS :National Ref : 02702875Title : Medical instruments - Retractors type Israel




ICS :National Ref : 02702876Title : Medical instruments - Retractors type Roux




ICS :National Ref : 02702878Title : Medical instruments - Retractors type Weitlaner




ICS :National Ref : 02702879Title : Medical instruments - Dressing forceps type Gross - Part 1: Straight




ICS :National Ref : 02702880Title : Medical instruments - Dressing forceps type Gross - Part 2: Curved




ICS : 11.040.30National Ref :Title : Surgical needlesScope : This standard surgical needles definition, classification and characteristics, sampling,

inspection and testing includes information about the shape of the market.

Relatedness :

National : NewInternational : Modified ASTM A380/A380M:2013





Relatedness :National : NewInternational : Modified ASTM F1089:2010





Relatedness :National : NewInternational : Modified ASTM F899:2012


Subsector S18: STERILIZATION OF EQUIPMENT



ICS :National Ref : 06301748Title : Sterilization - Low temperature sterilizers - Part 7: Requirements for the installation and

operation of ethylene oxide sterilizers and their supply sources



Subsector S19: FIRST AID EQUIPMENT AND RESCUE SYSTEMS

Subsector : S19 Registration Date : 2015-12-01Organization : AFNORCountry : France


ICS :National Ref : PR NF X08-017Title : Evaluation of light sources proximal color temperature




ICS : 11.160, 95.020National Ref :Title : First aid kits and emergency medical care kits (for military use) Scope : This standard covers the first aid kits and emergency medical care kits for military use.



Subsector S21: LABORATORY MEDICINE, CLINICAL PATHOLOGY AND BIOSAFETY

Subsector : S21 Registration Date : 2015-12-01Organization : AFNORCountry : France


ICS :National Ref : PR NF S99-172 REVTitle : Use of medical devices - Risk management relative to the use of medical devices in

health care establishments



Subsector S24: SOIL QUALITY

Subsector : S24 Registration Date : 2015-12-22Organization : BSICountry : United Kingdom


ICS :National Ref : BS 8458:2015 CorrigendumTitle : Code of practice for the design of protective measures for methane andcarbon

dioxide ground gases for new buildings. Corrigendum



Subsector S99: UNDETERMINED

Subsector : S99 Registration Date : 2015-12-03Organization : BSICountry : United Kingdom


ICS :National Ref : BS 45004Title : Guidance for the application of ISO 45001 Occupational Health and

SafetyManagement Systems




ICS :National Ref : 06301741Title : Haematology - Determination of the concentration of blood corpuscles in blood - Part 3:

Reference method for the determination of the concentration of erythrozytes


Subsector : S99 Registration Date : 2015-12-03Organization : NENCountry : Netherlands


ICS : 03.100.01, 13.100National Ref : NTA 8620:2015 Concept nlTitle : Specification of a safety management system for major accidents hazardsScope : This NTA includes requirements for a safety management system to prevent major accidents

hazards in which one or more hazardous materials are involved, and for the control of the consequences.



** End of Sector **




Sector T : TRANSPORT, MECHANICAL HANDLING AND PACKAGING


Subsector T01: SHIPBUILDING AND MARITIME STRUCTURES

Subsector : T01 Registration Date : 2015-12-16Organization : DINCountry : Germany


ICS :National Ref : 13202735Title : Exhaust gas lines on ships - Flanges - Part 1: Heavy design



Subsector T02: AEROSPACE

Subsector : T02 Registration Date : 2015-12-22Organization : BSICountry : United Kingdom


ICS :National Ref : BS 4A 114:1999+A2:2015 CorrigendumTitle : corrosion-resisting steel, mushroom-headed,slotted-drive, bolts, strength class

880 MPa. Corrigendum


Subsector : T02 Registration Date : 2015-12-16Organization : DINCountry : Germany


ICS : 49.030.20National Ref : DIN 65447Title : Aerospace series - Bihexagonal head bolts, close tolerance, with medium-length MJ

thread, corrosion resisting nickel alloy - Nominal tensile strength 1550 MPa, for temperatures up to 315 °C



Subsector T03: ROAD VEHICLES

Subsector : T03 Registration Date : 2015-12-25Organization : TSECountry : Turkey

Project ID : tst00555/0001 Project Esta

Documents

Λευκωσία Ιανουαρίου - ΚΕΒΕ · 2021. 1. 8. · Information procedure Page 1 Monthly Notifications Register Notifications registered at CCMC from 2015-12-01 to