Λευκωσία Μαϊου - CCCI · Eurocode 1: Actions on structures. Part 1-7. Accidental actions. Amendment Relatedness : National : New Subsector : B02 Registration Date : 2014-04-28

Λευκωσία, 12 Μαϊου 2014

ΠΡΟΣ: Όλα τα Μέλη ΘΕΜΑ: APRIL 2014 Notification Procedure 1025/2012

Κυρία/Κύριε,

Σας επισυνάπτουμε γνωστοποιήσεις από Εθνικούς Οργανισμούς Τυποποίησης, μελών των Ευρωπαϊκών Οργανισμών Τυποποίησης CEN/CENELEC, που περιέχουν τους τίτλους προτεινόμενων εθνικών προτύπων. Σύμφωνα με την Ευρωπαϊκή Οδηγία που αφορά την πληροφόρηση σε θέματα τεχνικών προτύπων, μπορείτε, αφού μελετήσετε τους τίτλους: α) να ζητήσετε όπως λάβετε ηλεκτρονικά ολόκληρο το κείμενο του προσχεδίου εθνικού προτύπου, εάν αυτό είναι διαθέσιμο, β) να συμμετάσχετε στις συναντήσεις της τεχνικής επιτροπής του Εθνικού Οργανισμού Τυποποίησης που ετοιμάζει το προσχέδιο προτύπου και γ) να υποβάλετε εισήγηση στον CYS, να αρχίσει τυποποιητική εργασία σε Ευρωπαϊκό επίπεδο σχετικά με το θέμα της γνωστοποίησης, εάν φυσικά πιστεύετε ότι το εν λόγο εθνικό πρότυπο θα επηρεάσει την ελεύθερη διακίνηση προϊόντων ή την κυπριακή βιομηχανία και οικονομία. Τυχόν σχόλια και παρατηρήσεις παρακαλώ όπως υποβάλλονται στον Κυπριακό Οργανισμό Τυποποίησης. Σε περίπτωση που δε υπάρξει οποιαδήποτε ανταπόκριση, ο CYS δε θα φέρει ένσταση στην προώθηση των υπό αναφορά εθνικών προτύπων. Για περισσότερες πληροφορίες μπορείτε να επικοινωνείτε με την κα. Μαριλένα Νικολάου, Λειτουργό ∆ιοίκησης και ∆ιεθνών Σχέσεων του Κυπριακού Οργανισμού Τυποποίησης (CYS), τηλ: 22 411439, Φαξ. 22 411511 και στην ηλεκτρονική διεύθυνση: [email protected] Με εκτίμηση, Ανδρέας Ανδρέου, Αναπλ. ∆ιευθυντής Τμήματος Βιομηχανίας. για Γενικό Γραμματέα. /ΜΚ

Λεωφ. Γρίβα ∆ιγενή 38 & ∆εληγιώργη 3, 1066, Τ.Θ. 21455, 1509 Λευκωσία, Κύπρος Τηλ. + 357-22889800, Φαξ. +357-22665685, E-mail:[email protected]

Information procedure Page 1

Monthly Notifications Register

Notifications registered at CCMC from 2014-04-01 to 2014-04-30

Register issued on : 2014-05-05

A list of subsectors can be found at the end of this document.




Sector A : SERVICES


Page 3Subsector A03: POSTAL SERVICES

Subsector : A03 Registration Date : 2014-04-10Organization : PKNCountry : PolandProject ID : 25901105/0001 Project EstablishedICS : 03.240National Ref : prPN-T-85007Title : Definitive stampsScope : This standard specifies technical requirements concerning definitive stamps, particularly

these which enable automatic letter sorting machines to recognize stamps. It provides formats of stamps, type and dimensions of perforation. It specifies requirements related to grammage of paper with glue coating and its form (sheet, roll) used to produce stamps. It provides requirements for paper relevant to whiteness, smoothness, fluorescence, water and ink absorptivity and breaking strength. It specifies all elements, which inscription consists of, its dimensions and technology of production. It provides tests procedure, methods and scope of acceptance control. It lists shortcomings causing discard of stamps before start of tests. It also provides a way of packing and marking definitive stamps

Relatedness :National : New

** End of Subsector **

Subsector A08: FUNERAL SERVICES

Subsector : A08 Registration Date : 2014-04-24Organization : UNMZCountry : Czech RepublicProject ID : 493160-1/0001 Draft for public enquiryICS :National Ref :Title : Coffins - Part 1: General and mechanical requirements and marking


Subsector : A08 Registration Date : 2014-04-24Organization : UNMZCountry : Czech RepublicProject ID : 493160-2/0001 Draft for public enquiryICS :National Ref :Title : Coffins - Part 2: Specific requirements for cremation coffins



Subsector A99: UNDETERMINED

Subsector : A99 Registration Date : 2014-04-30Organization : UNICountry : Italy

Page 4

Project ID : 8300A090/0001 Project EstablishedICS : 03.040National Ref : U8300A090Title : Non-regulated professions - Loss adjusters for all activities pertaining to surveys,

evaluation and/or settlement of damages arising from claims - Knowledge, skill and competence requirements

Scope : The aim of this codification activity is to define the qualifications necessary to the loss-adjustment profession, i.e. the professional activities of certification, estimation and/or settlement of damages carried out by experts. These qualifications, which are necessary for the aforementioned tasks and specific activities, are based on expertise, ability and competence, in accordance with the European Qualifications Framework (EQF) and are explained in such a way as to facilitate assessment procedures and provide recognition for learning outcomes. The code excludes: - Damage from traffic, fire and theft of vehicles and crafts; Note: subject to the rules outlined in Article X of the Insurance Code - Evaluation of physical and biological damage to persons.


Subsector : A99 Registration Date : 2014-04-22Organization : TSECountry : TurkeyProject ID : tst11921/0002 Project EstablishedICS : 03.080.30, 43.140National Ref :Title : Authorized services - Rules for motorcycleScope : This standard includes the rules of authorized services of motorcycles about structural

feature, management, technical equipment, properties of staff and certification.


Subsector : A99 Registration Date : 2014-04-22Organization : TSECountry : TurkeyProject ID : tst12870/0002 Project EstablishedICS : 03.080.30National Ref :Title : Competent services rules for compressorsScope : This standard includes rules for operating, structural feature, technical equipment,

personnel specifications and certification of competent services of compressors.


Subsector : A99 Registration Date : 2014-04-22Organization : TSECountry : TurkeyProject ID : tst93687/0001 Project EstablishedICS : 13.030.50

Page 5

National Ref :Title : Workplaces-Rules for tires of life completed recovery facilitiesScope : This standard includes rules for structural characteristics, operating, personal, technical

equipment and safety of tires of life completed recovery facilities


Subsector : A99 Registration Date : 2014-04-22Organization : TSECountry : TurkeyProject ID : tst96257/0001 Project EstablishedICS : 03.080.30National Ref :Title : Authorized services rules for pneumatic machinesScope : This standard includes rules for operating, structural feature, technical equipment,

personnel specifications and certification of Authorized services of pneumatic machines.


Subsector : A99 Registration Date : 2014-04-22Organization : TSECountry : TurkeyProject ID : tst96259/0001 Project EstablishedICS : 03.080.30, 43.150National Ref :Title : Authorized services - Rules for bicycleScope : This standard includes the rules of authorized services of bicycles about structural feature,

management, technical equipment, properties of staff and certification.



** End of Sector **




Sector B : BUILDING AND CONSTRUCTION


Page 7Subsector B01: FIRE PROTECTION

Subsector : B01 Registration Date : 2014-04-09Organization : ISSCountry : Serbia Latest Date for Comments : 2014-06-03Project ID : 00048565/0001 Draft for public enquiryICS : 13.220.10National Ref : SRPS Z.C4.051:2014Title : Hatchet for firefighters with protective coverScope : This standard applies to hatchet for firefighters, defined in clause 3, and their protective

cover . Hatchet for firefighters with protective cover is personal equipment for firefighters of the fire service

Relatedness :National : NewInternational : Identical to DIN 14924:2003

Subsector : B01 Registration Date : 2014-04-28Organization : BSI Draft Issue Date : 2014-04-22Country : United Kingdom Latest Date for Comments : 2014-06-30Project ID : 01201181/0001 Draft for public enquiryICS :National Ref : PD 7974-5Title : PD 7974-5. Application of fire safety engineering principles to the design of

buildings. Part 5. Fire and rescue service intervention (Sub-system 5)


Subsector : B01 Registration Date : 2014-04-10Organization : DINCountry : GermanyProject ID : 03100805/0001 Project EstablishedICS : 13.220.10National Ref : DIN 14555-12Title : Vehicles carrying tools and gears - Part 12: Hazardous material (HAZMAT) vehicle GW-

G


Subsector : B01 Registration Date : 2014-04-10Organization : DINCountry : GermanyProject ID : 03100952/0001 Project EstablishedICS :National Ref : 03100952Title : Ceiling hook


Subsector : B01 Registration Date : 2014-04-01

Page 8

Organization : AENORCountry : SpainProject ID : P0042871/0001 Project EstablishedICS :National Ref : PNE 23121Title : Installation and maintenance of fire blankets.Scope : This standard specifies the general requirements for the installation and maintenance of

fire blankets.


Subsector : B01 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : tst12250/0002 Project EstablishedICS : 13.220.20National Ref :Title : Evaluation guide for crash/fire/rescue services(Stanag 3929)Scope : The content of this standard is to standardize the methods used to evaluated the

effectivenes of military fire services

Relatedness :National : NewInternational : Modified STANAG 3929 ED6:2011


Subsector B02: STRUCTURES

Subsector : B02 Registration Date : 2014-04-28Organization : BSI Draft Issue Date : 2014-04-23Country : United Kingdom Latest Date for Comments : 2014-06-23Project ID : 01400696/0001 Draft for public enquiryICS :National Ref : NA to BS EN 1991-1-7Title : NA to BS EN 1991-1-7. National Annex to BS EN 1991-1-7:2006+A1:2014. Eurocode

1: Actions on structures. Part 1-7. Accidental actions. Amendment


Subsector : B02 Registration Date : 2014-04-28Organization : BSICountry : United KingdomProject ID : 01401053/0001 Project EstablishedICS :National Ref : NA to BS EN 1993-1-1:2005Title : UK National Annex to Eurocode 3. Design of steel structures General rules and

rules for buildings. NA to BS EN 1993-1-1. Amendment


Page 9

Subsector : B02 Registration Date : 2014-04-28Organization : BSICountry : United KingdomProject ID : 01401065/0001 Project EstablishedICS :National Ref : BS 8002Title : Code of practice for earth retaining structures


Subsector : B02 Registration Date : 2014-04-28Organization : BSICountry : United KingdomProject ID : 01401066/0001 Project EstablishedICS :National Ref : BS 8004Title : Code of practice for foundations (Formerly CP 2004)



Subsector B03: CONCRETE

Subsector : B03 Registration Date : 2014-04-17Organization : MSZTCountry : HungaryProject ID : 34810703/0001 Project EstablishedICS : 91.100, 91.100.30National Ref : MSZ 4798:2014Title : Concrete. Specification, performance, production, conformity, and rules of application of

MSZ EN 206 in Hungary

Relatedness :National : REV/AMD MSZ 4798-1:2004

Subsector : B03 (Secondary Subsector)

Registration Date : 2014-04-17

Organization : MSZTCountry : HungaryProject ID : 34810703/0001 Project EstablishedICS : 91.100, 91.100.30National Ref : MSZ 4798:2014Title : Concrete. Specification, performance, production, conformity, and rules of application of

MSZ EN 206 in Hungary

Relatedness :National : REV/AMD MSZ 4798-1:2004

Subsector : B03 Registration Date : 2014-04-01Organization : AENOR

Page 10

Country : SpainProject ID : P0042821/0001 Project EstablishedICS :National Ref : PNE 180201Title : Formwork. General Design, performance requirements and verificationsScope : This standard specifies performance requirements, (structural and general) design methods

and verifications for formworks. The requirements given are applicable to different types of formwork normally used in construction. In addition, requirements for special types are established. This standard does not apply to the specific requirements of those elements that can be incorporated into the formwork in production or work phase on construction sites and are established in other National or European standards.


Subsector : B03 Registration Date : 2014-04-01Organization : AENORCountry : SpainProject ID : P0042834/0001 Project EstablishedICS :National Ref : PNE 83987Title : Concrete durability. Test methods. Measurement of chloride diffusion coefficient in

hardened concrete. Multiregime method.Scope : This draft standard revises the previous version updating some technical issues.

Relatedness :National : REV/AMD UNE 83987:2009

Subsector : B03 Registration Date : 2014-04-30Organization : AENORCountry : SpainProject ID : P0042975/0001 Project EstablishedICS :National Ref : PNE 83607Title : Sprayed concrete. General recommendations.Scope : This standard updates the current version, taking into account the corresponding product

european standards, and providing general rules for the classification, intended uses, execution, transport etc of sprayed concrete

Relatedness :National : REV/AMD UNE 83607:1994 IN


Subsector B07: GLASS

Subsector : B07 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : tst12245/0001 Project EstablishedICS : 95.020National Ref :Title : Eye protection for the individual Soldier-Ballistic protection (Stanag 4296)

Page 11

Scope : This standard covers th general rules of the for the individual soldier ballistic protection.



Subsector B10: TIMBER STRUCTURES

Subsector : B10 Registration Date : 2014-04-10Organization : DINCountry : GermanyProject ID : 00517125/0001 Project EstablishedICS :National Ref : 00517125Title : Application of construction products in structures - Part 6: Dowel-type fasteners and

connectors



Subsector B12: MASONRY

Subsector : B12 Registration Date : 2014-04-11Organization : SIST Draft Issue Date : 2014-09-01Country : Slovenia Latest Date for Comments : 2014-07-11Project ID : 00005479/0001 Project EstablishedICS :National Ref : SIST EN 1304:2014/oA101:2014Title : Clay roofing tiles and fittings – Products definitions and specifications Scope : The document specifies levels of frost resistance and number of cycles applicable in

different countries.



Subsector B14: GEOTECHNICS

Subsector : B14 Registration Date : 2014-04-10Organization : DINCountry : GermanyProject ID : 00517118/0001 Project EstablishedICS :National Ref : 00517118Title : Design of ground improvement - Jet grouting, deep mixing or grouting; Amendment 1


Subsector : B14 Registration Date : 2014-04-30Organization : MSZT

Page 12

Country : HungaryProject ID : 34812602/0001 Project EstablishedICS :National Ref : MSZ CEN ISO/TS 17892-1:2014Title : Geotechnical investigation and testing. Laboratory testing of soil. Part 1: Determination

of water content (ISO/TS 17892-1:2004)

Relatedness :National : REV/AMD MSZE CEN ISO/TS 17892-1:2006



Organization : MSZTCountry : HungaryProject ID : 34812602/0001 Project EstablishedICS :National Ref : MSZ CEN ISO/TS 17892-1:2014Title : Geotechnical investigation and testing. Laboratory testing of soil. Part 1: Determination

of water content (ISO/TS 17892-1:2004)


Subsector : B14 Registration Date : 2014-04-30Organization : MSZTCountry : HungaryProject ID : 34812603/0001 Project EstablishedICS :National Ref : MSZ CEN ISO/TS 17892-2:2014Title : Geotechnical investigation and testing. Laboratory testing of soil. Part 2: Determination

of density of fine-grained soil (ISO/TS 17892-2:2004)




Organization : MSZTCountry : HungaryProject ID : 34812603/0001 Project EstablishedICS :National Ref : MSZ CEN ISO/TS 17892-2:2014Title : Geotechnical investigation and testing. Laboratory testing of soil. Part 2: Determination

of density of fine-grained soil (ISO/TS 17892-2:2004)


Subsector : B14 Registration Date : 2014-04-30Organization : MSZTCountry : HungaryProject ID : 34812604/0001 Project Established

Page 13

ICS : 13.080, 13.080.20National Ref : MSZ CEN ISO/TS 17892-3:2014Title : Geotechnical investigation and testing. Laboratory testing of soil. Part 3: Determination

of particle density. Pycnometer method (ISO/TS 17892-3:2004)




Organization : MSZTCountry : HungaryProject ID : 34812604/0001 Project EstablishedICS : 13.080, 13.080.20National Ref : MSZ CEN ISO/TS 17892-3:2014Title : Geotechnical investigation and testing. Laboratory testing of soil. Part 3: Determination

of particle density. Pycnometer method (ISO/TS 17892-3:2004)


Subsector : B14 Registration Date : 2014-04-30Organization : MSZTCountry : HungaryProject ID : 34812605/0001 Project EstablishedICS : 13.080, 13.080.20National Ref : MSZ CEN ISO/TS 17892-4:2014Title : Geotechnical investigation and testing. Laboratory testing of soil. Part 4: Determination

of particle size distribution (ISO/TS 17892-4:2004)





of particle size distribution (ISO/TS 17892-4:2004)


Subsector : B14 Registration Date : 2014-04-30Organization : MSZTCountry : HungaryProject ID : 34812606/0001 Project EstablishedICS : 13.080, 13.080.20National Ref : MSZ CEN ISO/TS 17892-12:2014

Page 14

Title : Geotechnical investigation and testing. Laboratory testing of soil. Part 12: Determination of Atterberg limits (ISO/TS 17892-12:2004)





of Atterberg limits (ISO/TS 17892-12:2004)



Subsector B15: SANITARY APPLIANCES

Subsector : B15 Registration Date : 2014-04-01Organization : AENORCountry : SpainProject ID : P0042820/0001 Project EstablishedICS :National Ref : PNE 67001Title : Ceramic sanitary ware. Technical specificationsScope : This standard establishes the test methods and requirements of ceramics sanitary

appliances under no harmonized standard for use in sanitary rooms, kitchens and laundry rooms. It updates the current edition (2008).



Subsector B18: SCAFFOLDING

Subsector : B18 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : tst11508/0001 Project EstablishedICS : 53.020.01National Ref :Title : Materials handling equipmentScope : This standard covers the properties of materials handling equipment.



Page 15Subsector B19: CERAMIC TILES

Subsector : B19 Registration Date : 2014-04-01Organization : AENORCountry : SpainProject ID : P0042865/0001 Project EstablishedICS :National Ref : PNE 136021Title : Finit Element Calculation Method for the determination of the thermal transmittance of

masonry built from clay masonry units.Scope : It establishes the finit element calculation method for the determination of the thermal

transmittance of masonry built from clay masonry units.



Subsector B20: DRAINAGE EQUIPMENT

Subsector : B20 Registration Date : 2014-04-08Organization : NBN Draft Issue Date : 2014-04-08Country : Belgium Latest Date for Comments : 2014-09-07Project ID : BE059587/0001 Draft for public enquiryICS : 93.030National Ref : NBN B 34-001, ed 1Title : Investigation and assessment of drain and sewer systems outside buildings - Visual

inspection coding system - National supplement to NBN EN 13508-2+A1:2011

Relatedness :National : NewEuropean : Not Equivalent to EN 13508-2+A1:2011


Subsector B26: ROAD BUILDING AND MAINTENANCE

Subsector : B26 Registration Date : 2014-04-08Organization : NENCountry : NetherlandsProject ID : 50001882/0001 Project EstablishedICS : 93.030National Ref : NEN 7067:2014 nlTitle : Gullies - Definition, nominal dimensions (functional) requirements and test methodsScope : NEN 7067 gives definitions and general requirements for gullies as well as the basis for

additional requirements with regard to material and product in specific product standards. This standard applies to street gullies, pavement gullies and combined street-pavement gullies irrespective of the materials used. The standard is meant to be applied in combination with the specific standards.


Subsector : B26 Registration Date : 2014-04-17Organization : SNV Draft Issue Date : 2014-04-17Country : Switzerland Latest Date for Comments : 2014-05-22

Page 16

Project ID : CH140008/0001 Draft for public enquiryICS : 93.080.20National Ref : SN 640580Title : Unbound foundation layers; Design and requirements for the built-in layers

Relatedness :National : REV/AMD SN 640580 (2002)


Subsector B32: PRECAST CONCRETE PRODUCTS

Subsector : B32 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : tst00799/0001 Project EstablishedICS : 91.140.70National Ref :Title : Squatting WC-Bowls (Made of Ceramic and Cast Iron)Scope : This standard specifies the classification, proporties, sampling, testing and marking of

ceramic and cast iron sguatiting WC-bowls.



Subsector B34: BUILDING AND CONSTRUCTION ENVIRONMENTAL ASPECTS

Subsector : B34 Registration Date : 2014-04-22Organization : TSECountry : TurkeyProject ID : tst96182/0001 Project EstablishedICS : 13.020.99, 91.100.99National Ref :Title : Asbestos Standard for General Industry and Construction Industry.Scope : Definition and types of asbestos, the application methods and locations of asbestos in

industry, the hazards and the negative effects on human health and caused diseases of asbestos, removal and cleaning with onsite inspection jobs of asbestos and the definition of Personal Protective Material (PPM) and Equipments (PPE) to be used during those jobs, (occupational health and safety supplies and equipment definitions), are the subject of this standard.

Relatedness :National : NewEuropean : Not Equivalent to NEN 2990:2012


Page 17

Scope : industry, the hazards and the negative effects on human health and caused diseases of asbestos, removal and cleaning with onsite inspection jobs of asbestos and the definition of Personal Protective Material (PPM) and Equipments (PPE) to be used during those jobs, (occupational health and safety supplies and equipment definitions), are the subject of this standard.







Relatedness :National : NewEuropean : Not Equivalent to SC 510:2011


industry, the hazards and the negative effects on human health and caused diseases of

Page 18

Scope : asbestos, removal and cleaning with onsite inspection jobs of asbestos and the definition of Personal Protective Material (PPM) and Equipments (PPE) to be used during those jobs, (occupational health and safety supplies and equipment definitions), are the subject of this standard.






Subsector B99: UNDETERMINED

Subsector : B99 Registration Date : 2014-04-18Organization : ASICountry : AustriaProject ID : 00026117/0001 Project EstablishedICS : 03.100.01National Ref : ÖNORM A 2063Title : Exchange of data concerning service description, tender, offer, works contract and final

settlement in electronic formScope : This Austrian Standard regulates the development of data which is exchanged automatically

between all stakeholders, such as LB editors, EC-Publisher, designers, clients, bidders or contractors in tender phases, contracting and billing (AVA). The following areas are covered: service description, element catalogue, specifications, accounting.



** End of Sector **




Sector C : CHEMICALS, CHEMICAL ENGINEERING AND FOOD PRODUCTS


Page 20Subsector C01: Food products

Subsector : C01 Registration Date : 2014-04-24Organization : MCCAACountry : MaltaProject ID : 00001100/0001 Project EstablishedICS :National Ref : SM 1100Title : Importation, processing and storage of flour - RequirementsScope : Standardization for the importation, processing and storage of flour.


Subsector : C01 (Secondary Subsector)


Organization : MCCAACountry : MaltaProject ID : 00001100/0001 Project EstablishedICS :National Ref : SM 1100Title : Importation, processing and storage of flour - RequirementsScope : Standardization for the importation, processing and storage of flour.


Subsector : C01 Registration Date : 2014-04-23Organization : MCCAACountry : MaltaProject ID : 00003200/0001 Project EstablishedICS : 03.080.99, 03.080.99National Ref : SM 3200Title : Cash and Valuables-In-Transit ServicesScope : Standardization for Cash and Valuables-In-Transit Services




Organization : MCCAACountry : MaltaProject ID : 00003200/0001 Project EstablishedICS : 03.080.99, 03.080.99National Ref : SM 3200Title : Cash and Valuables-In-Transit ServicesScope : Standardization for Cash and Valuables-In-Transit Services


Page 21

Subsector : C01 Registration Date : 2014-04-24Organization : MCCAACountry : MaltaProject ID : 00005100/0001 Project EstablishedICS :National Ref : SM 5100Title : Photo-voltaic Installations - Requirements for safety installationsScope : Standardization for the safety installations of Photovoltaic panels




Organization : MCCAACountry : MaltaProject ID : 00005100/0001 Project EstablishedICS :National Ref : SM 5100Title : Photo-voltaic Installations - Requirements for safety installationsScope : Standardization for the safety installations of Photovoltaic panels


Subsector : C01 Registration Date : 2014-04-24Organization : MCCAACountry : MaltaProject ID : 006000-1/0001 Project EstablishedICS : 97.220.01, 97.220.01National Ref : SM 6000-1Title : Combat Sport – General Requirements for BoxingScope : Standardization of coaching and competition/exhibition-staging facilities and the operation

thereof in respect of combat sports (boxing) practised by minors.




Organization : MCCAACountry : MaltaProject ID : 006000-1/0001 Project EstablishedICS : 97.220.01, 97.220.01National Ref : SM 6000-1Title : Combat Sport – General Requirements for BoxingScope : Standardization of coaching and competition/exhibition-staging facilities and the operation

thereof in respect of combat sports (boxing) practised by minors.


Page 22

Subsector : C01 Registration Date : 2014-04-01Organization : AENORCountry : SpainProject ID : P0042777/0001 Project EstablishedICS :National Ref : PNE 34803Title : Spices and condiments. Determination by spectrophotometry of safranal from saffron

stigmata(Crocus sativus L.)Scope : This UNE standard describes a method for the determination of safranl in saffron by means

of a measurement of the absorbance with a spectrophotometre.


Subsector : C01 Registration Date : 2014-04-03Organization : TSECountry : TurkeyProject ID : t1000311/0001 Project EstablishedICS : 67.200.20National Ref :Title : Sesame seedScope : This standard includes sesame seed. It does not apply to certificated sesame seed kept for

sowing and also physically or chemically processed sesame seeds


Subsector : C01 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : t1001469/0001 Project EstablishedICS : 67.080.20National Ref :Title : Canned Artichokes Scope : This standard applies to canned artichokes


Subsector : C01 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : t1001864/0001 Project EstablishedICS : 67.100.10National Ref :Title : Cream and kaymakScope : This standard specifies the cream which is defined in caluse 0.2.1. It does not cover Afyon

kaymak and foam


Page 23

Subsector : C01 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : t1002666/0001 Project EstablishedICS : 67.080.20National Ref :Title : Canned Fried Green PeppersScope : This standard applies to canned fried green peppers which is defined in caluse 0.2.1.


Subsector : C01 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : t1002667/0001 Project EstablishedICS : 67.080.20National Ref :Title : Canned Stuffed Green Peppers (With Vegetable Oil)Scope : This standard applies to cenned stuffed green peppers (with vegetable oil).


Subsector : C01 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : t1002668/0001 Project EstablishedICS : 67.080.20National Ref :Title : Canned Stuffed Eggplant With Vegetable OilScope : This standard applies to canned stuffed eggplant with vegetable oil.


Subsector : C01 Registration Date : 2014-04-03Organization : TSECountry : TurkeyProject ID : t1003411/0001 Project EstablishedICS : 67.080.10National Ref :Title : Seedless raisin Scope : This standard applies to seedless raisins. It does not apply other raisins which their seeds are

mechanically taken and also do not apply to blackberries.


Subsector : C01 Registration Date : 2014-04-28Organization : TSE

Page 24

Country : TurkeyProject ID : t1003984/0001 Project EstablishedICS : 67.160.20National Ref :Title : Strawberry NectarScope : This standard comprise strawberry nectar.


Subsector : C01 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : t1003985/0001 Project EstablishedICS : 67.160.20National Ref :Title : Plum NectarScope : This standard comprise plum nectar.


Subsector : C01 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : t1007360/0001 Project EstablishedICS : 67.080.01National Ref :Title : Fruits, Vegetables and Derived Products-Qualitative Method for the Detection of Sulphur

Dioxide Scope : This standard the method is applicable to products having contents of 2 mg or more per

kilogram. It consists in acidification of a test portion and decolourizing by the liberated gas of a starch indicator paper previously coloured blue by a trace of iodine vapour.


Subsector : C01 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : t1007573/0001 Project EstablishedICS : 67.080.01National Ref :Title : Fruits, Vegetables and Derived Products-Determination of Zinc Content-Atomic

Absorption Spectrometric Method Scope : This standard covers the method consists is decomposing of organic matter by a dry or wet

method and determing of the Zn+ cation by a suitable spectrometer. For some liquid samples the determination may be carried out directly, without previous decomposition.


Page 25

Subsector : C01 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : t1007897/0001 Project EstablishedICS : 67.080.20National Ref :Title : Canned Mixed Vegetables With Vegetable OilScope : This standard applies to canned mixed vegetables with vegetable oil.


Subsector : C01 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : t1007898/0001 Project EstablishedICS : 67.080.20National Ref :Title : Canned Imambayıldı (Stewed Egg-Plant) With Vegetable Oil-Ready to serveScope : This standard applies to canned imambayıldı (stewed egg-plant) with vegetable oil which is

ready to serve


Subsector : C01 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : t1010582/0001 Project EstablishedICS : 67.180.20National Ref :Title : Gullac- Special Turkish sweetScope : This standard applies to güllaç


Subsector : C01 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : t1010938/0001 Project EstablishedICS : 67.080.10National Ref :Title : Hazelnut PureeScope : This standard covers the hazelnut puree


Subsector : C01 Registration Date : 2014-04-28Organization : TSE

Page 26

Country : TurkeyProject ID : t1011345/0001 Project EstablishedICS : 67.080.20National Ref :Title : Canned-Potatoes With Meat-Ready to ServeScope : This Standard covers the canned potatoes with meat which is ready to serve.


Subsector : C01 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : t1012383/0001 Project EstablishedICS : 67.080.20National Ref :Title : Canned TomatoesScope : This standard applies to Canned tomatoes


Subsector : C01 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : t1012395/0001 Project EstablishedICS : 67.160.20National Ref :Title : Pineapple Nectar

Scope : This standard comprise pineapple nectar.


Subsector : C01 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : t1012480/0001 Project EstablishedICS : 67.160.20National Ref :Title : Raspberry NectarScope : This standard comprise raspberry nectar.


Subsector : C01 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : t1012914/0001 Project Established

Page 27

ICS : 67.160.20National Ref :Title : Pear NectarScope : This standard comprise pear nectar.


Subsector : C01 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : t1013358/0001 Project EstablishedICS : 67.100.30National Ref :Title : Lor cheeseScope : This standard specified lor cheese.


Subsector : C01 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : t1013384/0001 Project EstablishedICS : 67.100.99National Ref :Title : Special Turkish Sweets (prepared by adding milk) Ready to serve-powderScope : This standard contains Special Turkish Sweets (prepared by adding milk) Ready to serve-

powder . It does not contain Special Turkish Sweets ready to eat.


Subsector : C01 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : t1013568/0001 Project EstablishedICS : 67.160.20National Ref :Title : BeveragesScope : This standard specifies beverages.


Subsector : C01 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : t2002284/0001 Project EstablishedICS : 67.060National Ref :

Page 28

Title : Boiled and pounded wheatScope : This standard covers boiled and pounded wheat


Subsector : C01 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : t2002590/0001 Project EstablishedICS : 67.180.10National Ref :Title : Tahini HalvaScope : This standard covers tahini halvah (Special Turkish Delight)


Subsector : C01 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : t2010937/0001 Project EstablishedICS : 67.080.10National Ref :Title : Hazelnut MealScope : This standard covers the hazelnut meal.


Subsector : C01 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : t2012929/0001 Project EstablishedICS : 67.140.10National Ref :Title : Black tea in fusion bagScope : This standard specifies black tea in infusion bag, produced to be used in cup, tea pot, etc.


Subsector : C01 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : t3001620/0001 Project EstablishedICS : 67.060National Ref :Title : MakaroniScope : This standard covers macaroni.

Relatedness :

Page 29

National : New

Subsector : C01 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : t3004500/0001 Project EstablishedICS : 67.060National Ref :Title : Wheat Flour Scope :

This standard specifies by indivicually wheat floor which is prepared or mixing of triticum aestivum, triticum compactum and tritium drum wheat.


Subsector : C01 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : t4012691/0001 Project EstablishedICS : 67.140.10National Ref :Title : Green TeaScope : This standard specifies the green tea.


Subsector : C01 Registration Date : 2014-04-03Organization : TSECountry : TurkeyProject ID : tst01814/0001 Project EstablishedICS : 67.080.20National Ref :Title : DillScope : This standard applies to dill described in clause 0.2 and to be supplied to the consumer as

fresh.


Subsector : C01 Registration Date : 2014-04-03Organization : TSECountry : TurkeyProject ID : tst06160/0001 Project EstablishedICS : 67.120.10National Ref :Title : Meat-Rules for Refrigerating, Freezing, Storage Transporting and ThawingScope : This standard applies to the rules conserning to cold air systems, precooling, cooling,

freezing and storage in chilled or frozen forms, transportation, tawing of red meats. It does not apply to the rules concerning to, red meat products.

Page 30


Subsector : C01 Registration Date : 2014-04-03Organization : TSECountry : TurkeyProject ID : tst09984/0001 Project EstablishedICS : 65.120National Ref :Title : Animal Feeds-Concentrated Fattening Cattle FeedScope : This standard applies to concentrated fattening catte feeds. It does not apply to the other

kind of concentrated feeds.


Subsector : C01 Registration Date : 2014-04-03Organization : TSECountry : TurkeyProject ID : tst10053/0001 Project EstablishedICS : 65.120National Ref :Title : Animal Feeds - Milk Feeds for Dairy CowsScope : This standard applies to feeds used for dairy cows. It does not apply to the other kind of

cattle feeds and milk feeds.


Subsector : C01 Registration Date : 2014-04-22Organization : TSECountry : TurkeyProject ID : tst10435/0001 Project EstablishedICS : 65.120National Ref :Title : Animal Feeds-Goad Kid FeedScope : This standard applies to goat kid feeds. It does not apply to the other kind of goat feeds.


Subsector : C01 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : tst10746/0001 Project EstablishedICS : 65.120National Ref :Title : Animal Feeds - Concentrated Dairy Cattle FeedScope : This standard applies to concenrated dairy cattle feeds. It does not apply to the other kind

of concentrated feeds.

Page 31


Subsector : C01 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : tst10749/0001 Project EstablishedICS : 65.060.50National Ref :Title : Agricultural Machinery - Pick - Up Straw MachineScope : This standard applies to straw stalks pick-up machines starting by a tractor tail pin, pick up

the stalks, cutting stalks to the straw, loading straws to tractor by obligatory air current.


Subsector : C01 Registration Date : 2014-04-03Organization : TSECountry : TurkeyProject ID : tst11107/0001 Project EstablishedICS : 65.120National Ref :Title : Animal Feeds - Pregnant Sheep FeedScope : This standard applies to compound feeds of pregnant sheep. It Does not apply to the other

type of compound feeds manifactured for sheep


Subsector : C01 Registration Date : 2014-04-03Organization : TSECountry : TurkeyProject ID : tst11108/0001 Project EstablishedICS : 65.120National Ref :Title : Animal Feeds - Pregnant Cow FeedScope : This standard applies to Compound feeds of Pregnant compound feeds manifactured For

Cows



Subsector C02: PAINTS AND RELATED PRODUCTS

Subsector : C02 Registration Date : 2014-04-01Organization : AENORCountry : SpainProject ID : P0042776/0001 Project EstablishedICS :

Page 32

National Ref : PNE 48103Title : Paints and varnishes. Standardized colours.Scope : This standard selects a collection of standard colors for uniformuly coloured, hiding, non-

metallized and non-louminous paints.



Subsector C03: CHEMISTRY

Subsector : C03 Registration Date : 2014-04-01Organization : AENORCountry : Spain Latest Date for Comments : 2014-05-07Project ID : P0042595/0002 Draft for public enquiryICS :National Ref : PNE 84105Title : Cosmetic raw materials. Sunscreens. 2-Hydroxy-4-methoxybenzophenone-5-sulfonic

acid (Sulisobenzone).Scope : This standard determines the specifications required by the 2-Hydroxy-4-

methoxybenzophenone-5-sulfonic acid.



Subsector C11: TOBACCO

Subsector : C11 Registration Date : 2014-04-02Organization : ISSCountry : Serbia Latest Date for Comments : 2014-05-26Project ID : 00042964/0001 Draft for public enquiryICS : 65.160National Ref : SRPS E.P2.009/1Title : Reconstituted tobacco - folio of tobacco – Specification and test methods – Amendment

1Scope : This amendment relates to the standard SRPS E.P2.009:2004, clause 5.


Subsector : C11 Registration Date : 2014-04-02Organization : ISSCountry : Serbia Latest Date for Comments : 2014-05-26Project ID : 00047844/0001 Draft for public enquiryICS : 65.160National Ref : SRPS E.P1.113/1Title : Unfermented tobacco in leaf – Burley type of tobacco – Specification – Amendment 1Scope : This amendment relates to the standard SRPS E.P1.113:2004, clauses 4.3, 4.3.1, 4.4.1 and 4.6.


Page 33

Subsector : C11 Registration Date : 2014-04-02Organization : ISSCountry : Serbia Latest Date for Comments : 2014-05-26Project ID : 00047848/0001 Draft for public enquiryICS : 65.160National Ref : SRPS E.P1.114/1Title : Unfermented tobacco in leaf – Virginia type of tobacco – Specification – Amendment 1Scope : This amendment relates to the standard SRPS E.P1.113:2004, clauses 4.4.1 and 4.6. of the.



Subsector C20: EXPLOSIVES AND FIREWORKS

Subsector : C20 Registration Date : 2014-04-22Organization : TSECountry : TurkeyProject ID : tst02788/0001 Project EstablishedICS : 71.100.30National Ref :Title : Trinitrotoluene (TNT)Scope : This standard covers the trinitrotoluene (TNT) used for producing the explosive matter and

ammunition.


Subsector : C20 Registration Date : 2014-04-22Organization : TSECountry : TurkeyProject ID : tst02870/0001 Project EstablishedICS : 71.100.30National Ref :Title : Black PowderScope : This standard covers the black powder for military use.

Relatedness :National : NewInternational : Modified MIL-P-223 B(3)NOT2:1991


Subsector C21: COSMETICS

Subsector : C21 Registration Date : 2014-04-01Organization : AENORCountry : Spain Latest Date for Comments : 2014-05-07Project ID : P0039819/0002 Draft for public enquiryICS :National Ref : PNE 84686Title : Cosmetic raw materials. Sunscreens. 3-(4-Methylbenzylidene) camphor.Scope : This standard includes the specifications required by the 3-(4-Methylbenzylidene) camphor

, in cosmetic uses.

Page 34


Subsector : C21 Registration Date : 2014-04-01Organization : AENORCountry : Spain Latest Date for Comments : 2014-05-07Project ID : P0039821/0002 Draft for public enquiryICS :National Ref : PNE 84687Title : Cosmetic raw materials. Sunscreens. 3,3,5-Trimethylcyclohexyl salicylate (Homosalate).Scope : This standard includes the specifications required by the 3.3.5-Trimethylcyclohexyl

salicylate (Homosalate), in cosmetic uses.



** End of Sector **




Sector F : FUNDAMENTAL STANDARDS


Page 36Subsector F07: DOCUMENTATION AND INFORMATION

Subsector : F07 Registration Date : 2014-04-10Organization : DINCountry : GermanyProject ID : 00900104/0001 Project EstablishedICS :National Ref : 00900104Title : Basic requirements for the planning and design of archive and library buildings



Subsector F15: MATERIAL TESTING IN GENERAL

Subsector : F15 Registration Date : 2014-04-03Organization : TSECountry : TurkeyProject ID : tst04770/0001 Project EstablishedICS : 29.100.20, 31.020National Ref :Title : Test methods for electrical and electronic component parts for military purpose, -Test

method for measuring insulation resistanceScope : This standard covers the test method for moisture resistance resistance of electrical and

electronic component parts for military purpose.

Relatedness :National : NewInternational : Modified MIL-STD-202 G (2):2013

Subsector : F15 Registration Date : 2014-04-03Organization : TSECountry : TurkeyProject ID : tst05313/0001 Project EstablishedICS : 29.100.20, 31.020National Ref :Title : Test methods for electrical and electronic componenets and parts for military purpose -

Test method for capacitanceScope : This standard covers the test method for measuring capacitance of electrical and electronic

components and parts for military purpose.

Relatedness :National : NewInternational : Modified MIL-STD-202 G (2):2013


Subsector F19: OPTICS

Subsector : F19 Registration Date : 2014-04-10Organization : DINCountry : GermanyProject ID : 02702676/0001 Project EstablishedICS : 37.020National Ref : DIN 58756-1

Page 37

Title : Production in optical engineering - Small lenses - Carriages and supporting mounts



Subsector F21: VALUE ANALYSIS AND PROJECT NETWORK

Subsector : F21 Registration Date : 2014-04-01Organization : MSZTCountry : HungaryProject ID : 03482581/0001 Project EstablishedICS :National Ref : MSZ 13073:2014 Kockázatkezelés. SzakszótárTitle : Risk management. Vocabulary

Relatedness :National : REV/AMD MSZ 13073:2014

Subsector : F21 (Secondary Subsector)


Organization : MSZTCountry : HungaryProject ID : 03482581/0001 Project EstablishedICS :National Ref : MSZ 13073:2014 Kockázatkezelés. SzakszótárTitle : Risk management. Vocabulary

Relatedness :National : REV/AMD MSZ 13073:2014


Subsector F99: UNDETERMINED

Subsector : F99 Registration Date : 2014-04-28Organization : SIS Draft Issue Date : 2014-04-25Country : Sweden Latest Date for Comments : 2014-06-25Project ID : 00626000/0001 Project EstablishedICS :National Ref : 626000Title : Spill safetyScope : Spill Safety is a standard, addressing methods and technical solutions in order to prevent,

limit and take care of oil- and chemical spillage during accident or daily operation - from smallscale, industrial leakage to large maritime accidents. The readiness for spill includes both stationary and mobile workplaces, as well as transports - both ashore and at sea



** End of Sector **




Sector H : PRODUCTS FOR HOUSEHOLD AND LEISURE USE


Page 39Subsector H33: FOOTWEAR (EXCLUDING PROTECTIVE FOOTWEAR)

Subsector : H33 Registration Date : 2014-04-30Organization : AENORCountry : SpainProject ID : P0042981/0001 Project EstablishedICS :National Ref : PNE 59537Title : Footwear. Test methods for soles, heels and rigid platforms. Fatigue resistance.Scope : This standard establishes a method for determining the fatigue resistance of rigid

components in the lower parts of footwear (heels, platforms, etc.).


Subsector : H33 Registration Date : 2014-04-30Organization : AENORCountry : SpainProject ID : P0042982/0001 Project EstablishedICS :National Ref : PNE 59536Title : Footwear. Test methods for soles. Compression fatigue resistance of cellular materials.Scope : This standard establishes a procedure for performing the compression fatigue test

Templating cellular polymer material or sheet material for this application.



** End of Sector **




Sector I : MECHANICAL ENGINEERING


Page 41Subsector I02: FASTENERS

Subsector : I02 Registration Date : 2014-04-28Organization : BSICountry : United KingdomProject ID : 01400944/0001 Project EstablishedICS :National Ref : BS 3643-2:2007 CorrigendumTitle : ISO metric screw threads. Part 2: Specification for selected limits of size.

Corrigendum


Subsector : I02 Registration Date : 2014-04-10Organization : DINCountry : GermanyProject ID : 06702100/0001 Project EstablishedICS :National Ref : 06702100Title : Stud bolts - Part 2: Metric interference thread MFS


Subsector : I02 Registration Date : 2014-04-10Organization : DINCountry : GermanyProject ID : 06702101/0001 Project EstablishedICS :National Ref : 06702101Title : Stud bolts - Part 1: Metric thread


Subsector : I02 Registration Date : 2014-04-22Organization : TSECountry : TurkeyProject ID : tst01704/0001 Project EstablishedICS : 21.060.10National Ref :Title : Bolts For Watthour MetersScope : This standard covers metric bolts for watthour meters to fisc covers, stampable with lead.

Relatedness :National : NewEuropean : Modified DIN 43854:1979

Subsector : I02 Registration Date : 2014-04-22Organization : TSECountry : TurkeyProject ID : tst01704/0001 Project Established

Page 42

ICS : 21.060.10National Ref :Title : Bolts For Watthour MetersScope : This standard covers metric bolts for watthour meters to fisc covers, stampable with lead.

Relatedness :National : NewInternational : Modified ISO 17672:2010

Subsector : I02 Registration Date : 2014-04-22Organization : TSECountry : TurkeyProject ID : tst01993/0001 Project EstablishedICS : 21.060.10National Ref :Title : Fixing Bolts With Metric Thread for Electric MetersScope : This standard covers metric bolts and their nuts for electric watthour meters

Relatedness :National : NewEuropean : Modified DIN 267-2:1984




Relatedness :National : NewInternational : Modified ISO/TR 4026:2003

Subsector : I02 Registration Date : 2014-04-22Organization : TSECountry : TurkeyProject ID : tst01995/0001 Project EstablishedICS : 21.060.10National Ref :Title : Tommy Screws With Clamping Bolts, With Metric Thread

Page 43

Scope : This standard covers tommy screws with clamping bolts, with metric thread.


Subsector : I02 Registration Date : 2014-04-22Organization : TSECountry : TurkeyProject ID : tst01995/0001 Project EstablishedICS : 21.060.10National Ref :Title : Tommy Screws With Clamping Bolts, With Metric ThreadScope : This standard covers tommy screws with clamping bolts, with metric thread.


Subsector : I02 Registration Date : 2014-04-22Organization : TSECountry : TurkeyProject ID : tst01995/0001 Project EstablishedICS : 21.060.10National Ref :Title : Tommy Screws With Clamping Bolts, With Metric ThreadScope : This standard covers tommy screws with clamping bolts, with metric thread.


Subsector : I02 Registration Date : 2014-04-03Organization : TSECountry : TurkeyProject ID : tst02339/0001 Project EstablishedICS : 21.060.50National Ref :Title : Split pinsScope : This standard, covers defination, classification, sampling, requirements, inspention, testing

and delivering to market of split pins


Subsector : I02 Registration Date : 2014-04-03Organization : TSECountry : TurkeyProject ID : tst02339/0001 Project EstablishedICS : 21.060.50National Ref :Title : Split pinsScope : This standard, covers defination, classification, sampling, requirements, inspention, testing

and delivering to market of split pins

Page 44


Subsector : I02 Registration Date : 2014-04-22Organization : TSECountry : TurkeyProject ID : tst07215/0001 Project EstablishedICS : 21.060.10National Ref :Title : Countersunk Double - Nip Bolts With Metric Thread (Agricultural Equipment)Scope : This standard covers countersunk double-nip bolts with metric thread for agricultural

equipment.



equipment.



equipment.



Page 45

Scope : equipment.



equipment.



equipment.

Relatedness :National : NewInternational : Modified ISO 898-1:2013

Subsector : I02 Registration Date : 2014-04-22Organization : TSECountry : TurkeyProject ID : tst079-4/0001 Project EstablishedICS : 21.060.30National Ref :Title : Washers-Part 4:Tab washersScope : This standard specifies defination, classification requirements, sampling, testing and

packaging for tap washers



Subsector I08: AGRICULTURAL MACHINES

Subsector : I08 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : tst04891/0001 Project Established

Page 46

ICS : 65.060.20National Ref :Title : Sugar Beet HarvestersScope : This standard applies to sugar beet harvesters.


Subsector : I08 Registration Date : 2014-04-22Organization : TSECountry : TurkeyProject ID : tst05243/0001 Project EstablishedICS : 65.060.40National Ref :Title : Agricultural Machinery - Garden Sprayers With EngineScope : This standard, covers garden sprayers with engine. It doesnt cover engine driven portable

atomizers and self propelled engine sprayers


Subsector : I08 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : tst05295/0001 Project EstablishedICS : 65.060.20National Ref :Title : Disc-HarrowsScope : This standard applies to disc-harrows for seed bed preparation.


Subsector : I08 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : tst05296/0001 Project EstablishedICS : 65.060.20National Ref :Title : Goble-DiscsScope : This standard applies to goble-discs for seed bed preparation stuble mulch operation


Subsector : I08 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : tst05690/0001 Project EstablishedICS : 65.060.30National Ref :

Page 47

Title : Seed Drills for Sowing In Lines (Tractor Drawn)Scope : This standard applies to tractor drawn seed drills for sowing in lines.


Subsector : I08 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : tst06426/0001 Project EstablishedICS : 65.060.20National Ref :Title : Hoeing Machines for TractorScope : This standard applies to tractor drawn hoeing machines. It doesn't apply to horse drawn,

engine powered, hand operated and tractor drawn rotary hoeing machines.


Subsector : I08 Registration Date : 2014-04-22Organization : TSECountry : TurkeyProject ID : tst06428/0001 Project EstablishedICS : 65.060.50National Ref :Title : Potato HarvestersScope : This standard applies to self propelled, tractor drawn and tractor mounted potato

harvesters.


Subsector : I08 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : tst06736/0001 Project EstablishedICS : 65.060.20National Ref :Title : Rotary Hoeing Machines for TractorsScope : This standard applies to rotary hoeing machines for tractors. It doesn't apply engine

powered hand operated rotary hoeing machines.



Page 48

Title : Agricultural Machinery-Knife Type MowersScope : This standard applies to knife type mowers.


Subsector : I08 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : tst11943/0001 Project EstablishedICS : 65.060.50National Ref :Title : Agricultural-Machinery-Flail MulcherScope : This standard applies to flail mulcher machines pulled by tractors. It does not apply to the

machines cut plant parts under the soil cutter for fresh feed hay chopper silage and stone grimder and also stalk cutter works in vertical position.


Subsector : I08 Registration Date : 2014-04-22Organization : TSECountry : TurkeyProject ID : tst95300/0001 Project EstablishedICS : 65.060.20National Ref :Title : Ploughs used for agricultural machineryScope : This standard applies to ploughs used with agricultural tractors



Subsector I09: SMALL TOOLS

Subsector : I09 Registration Date : 2014-04-10Organization : DINCountry : GermanyProject ID : 12102475/0001 Project EstablishedICS :National Ref : 12102475Title : Cold-forming taps - Technical delivery conditions for high-speed steel cold-forming taps


Subsector : I09 Registration Date : 2014-04-10Organization : DINCountry : GermanyProject ID : 12102476/0001 Project EstablishedICS :

Page 49

National Ref : 12102476Title : Cold-forming taps - Technical delivery conditions for carbide cold-forming taps


Subsector : I09 Registration Date : 2014-04-10Organization : DINCountry : GermanyProject ID : 12102479/0001 Project EstablishedICS :National Ref : 12102479Title : Taps and cold forming taps - Part 1: Long type; General plan of dimensions


Subsector : I09 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : tst01702/0001 Project EstablishedICS : 53.120National Ref :Title : Shovels, Spades and HandlesScope : This standard covers shovels, spades and its handles using in agricultural, construction and

mining works.

Relatedness :National : NewEuropean : Not Equivalent to BS 3388:2004


mining works.

Relatedness :National : NewEuropean : Not Equivalent to DIN 20120:1990


Page 50

Scope : mining works.



mining works.



mining works.



mining works.


Subsector : I09 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : tst01702/0001 Project EstablishedICS : 53.120National Ref :Title : Shovels, Spades and Handles

Page 51

Scope : This standard covers shovels, spades and its handles using in agricultural, construction and mining works.


Subsector : I09 Registration Date : 2014-04-03Organization : TSECountry : TurkeyProject ID : tst02338/0001 Project EstablishedICS : 25.140.30National Ref :Title : PunchesScope : This standard covers punches for metal working using handle

Relatedness :National : NewEuropean : Modified BS 3066:1995






Relatedness :

Page 52

National : NewEuropean : Modified DIN 6455:1984


Subsector I16: INTERNAL COMBUSTION ENGINES

Subsector : I16 Registration Date : 2014-04-03Organization : TSECountry : TurkeyProject ID : tst04252/0001 Project EstablishedICS : 29.160.40National Ref :Title : Generator Sets, Engine Driven Methods of Tests-Fuel Consumption TestScope : This standard covers the engine driven methods of tests for fuel consumption test in

generator sets.

Relatedness :National : NewInternational : Modified MIL-STD-705 C:2011

Subsector : I16 Registration Date : 2014-04-03Organization : TSECountry : TurkeyProject ID : tst05733/0001 Project EstablishedICS : 29.160.40National Ref :Title : Test methods for military, engine driven geretaor sets voltage modulation testScope : This standard covers the voltage modulation test methods for engine driven in generator

for military purpose.


Subsector : I16 Registration Date : 2014-04-03Organization : TSECountry : TurkeyProject ID : tst06824/0001 Project EstablishedICS : 29.160.40National Ref :Title : Test methods for military engine driven generator sets, line to line voltage unbalance

with unbalanced load testScope : This standard covers the military engine driven generator sets which can be loaded

unbalance with line to line voltage



Page 53

Title : Test Methods for Military, Engine Driven Generator Sets, Unbalanced Load Heating Test

Scope : This standard covers the unbalanced load heating test in engine driven generator sets for military uses.


Subsector : I16 Registration Date : 2014-04-03Organization : TSECountry : TurkeyProject ID : tst06939/0001 Project EstablishedICS : 29.160.40National Ref :Title : Test methods for military engine driven generator sets, valtage with unbalanced load

test (Line to neutral load)Scope : This standard covers the voltage with ınbalanced load test for military engine driven

generator sets.



Subsector I17: MACHINERY IN GENERAL (INCLUDING SAFETY)

Subsector : I17 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : tst12205/0001 Project EstablishedICS : 53.100National Ref :Title : Road RollersScope : This standard, includes the road rollers.

Relatedness :National : NewInternational : Not Equivalent to ISO 5502:1988


Subsector I18: MINING

Subsector : I18 Registration Date : 2014-04-10Organization : PKNCountry : PolandProject ID : 27501105/0001 Project EstablishedICS : 73.020National Ref : prPN-G-15022Title : Yielding arch roof support made of roof support arches -- Open arches -- Requirements

and testsScope : Specifies requirements and site tests of yielding roof support arches intent to use in

underground mines with and without bumps hazard


Page 54

Subsector : I18 Registration Date : 2014-04-10Organization : PKNCountry : PolandProject ID : 27501106/0001 Project EstablishedICS : 01.080.30, 73.020National Ref : prPN-G-09010Title : Mine maps -- Different conventional geological marksScope : Specifies conventional marks concerning stratigraphy and tectonics of rocks mass,

hydrogeological phenomena, degrees recognition of rock-deposits and other geological phenomena, used on mining maps



Subsector I19: NUCLEAR ENERGY

Subsector : I19 Registration Date : 2014-04-18Organization : ASI Draft Issue Date : 2014-04-15Country : AustriaProject ID : 00020977/0002 Project EstablishedICS : 11.020, 17.240National Ref : ÖNORM S 5234-4Title : Clinical dosimetry - Part 4: Method for dosimetry of small photon fieldsScope : Die vorliegende ÖNORM gilt für kleine Bestrahlungsfelder, die bei fluenzmodulierter

Strahlentherapie (IMRT), bei stereotaktischer Bestrahlung sowie bei fluenzmodulierter Strahlentherapie mit Bewegung der Gantry (IMAT) mit dem Elektronenbeschleuniger verwendet werden. Dies gilt sowohl für Beschleuniger mit als auch ohne Ausgleichsfilter. Die in dieser ÖNORM beschriebene Methode ist eine Anschlussmessung mit für die Dosimetrie kleiner Felder verwendbaren Strahlungsdetektoren zu Ionisationskammern, die gemäß ÖNORM S 5234-3 verwendet wer-den.


Subsector : I19 Registration Date : 2014-04-16Organization : AFNORCountry : FranceProject ID : 00175069/0001 Project EstablishedICS :National Ref : PR NF P18-364Title : Admixtures for concretes, mortars and grouts. Routine grouts for prestressing ducts.

Capillary water absorption test.

Relatedness :National : REV/AMD P18-364:198507 (P18-364)

Subsector : I19 Registration Date : 2014-04-16Organization : AFNORCountry : FranceProject ID : 00175078/0001 Project EstablishedICS :

Page 55

National Ref : PR XP S72-600Title : Helmets for parachuting


Subsector : I19 Registration Date : 2014-04-16Organization : AFNORCountry : FranceProject ID : 00175249/0001 Project EstablishedICS :National Ref : PR NF A81-303Title : Covered electrodes for manual metal arc welding - Procedure for the deposition of weld

metal - Hardness tests

Relatedness :National : REV/AMD NF A81-303:200312 (A81-303)

Subsector : I19 Registration Date : 2014-04-16Organization : AFNORCountry : FranceProject ID : 00175251/0001 Project EstablishedICS :National Ref : PR NF X06-039-4Title : Statistical techniques and methodology for use in validation of measurement methods

and assays - Part 4 : other statistical techniques


Subsector : I19 Registration Date : 2014-04-01Organization : AENORCountry : SpainProject ID : P0042838/0001 Project EstablishedICS :National Ref : PNE 73320-1Title : Standard method for the determination of environmental radioactivity. Sampling. Part 1:

SoilScope : This standard establishes the sampling method for the superficial layer of any type of soil to

obtain information about its background and analyse its evolution.

Relatedness :National : REV/AMD UNE 73311-1:2002

Subsector : I19 Registration Date : 2014-04-01Organization : AENORCountry : SpainProject ID : P0042839/0001 Project EstablishedICS :National Ref : PNE 73340-1Title : Standard method for the determination of environmental radioactivity. Analytical

Methods. Part 1: Gross beta activity index in water by gas flow proportional counter

Page 56

Scope : This standard establishes the test method for the measurement of gross beta activity in any type of water containing non-volatile beta emitting radionuclides with energies higher than 0,1 MeV


Subsector : I19 Registration Date : 2014-04-01Organization : AENORCountry : SpainProject ID : P0042840/0001 Project EstablishedICS :National Ref : PNE 73330-1Title : Standard method for the determination of environmental radioactivity. Preservation and

preparation of samples. Part 1: SoilScope : This standard establishes the method for the preservation and preparation of any type of

soil samples to guarantee that the physical-chemical characteristics of those samples will remain stable


Subsector : I19 Registration Date : 2014-04-01Organization : AENORCountry : SpainProject ID : P0042841/0001 Project EstablishedICS :National Ref : PNE 73320-2Title : Standard method for the determination of environmental radioactivity. Sampling. Part 2:

SedimentsScope : This standard establishes the sampling method for any type of sediments to obtain

information about its background values and analyse its evolution


Subsector : I19 Registration Date : 2014-04-01Organization : AENORCountry : SpainProject ID : P0042848/0001 Project EstablishedICS :National Ref : PNE 73340-2Title : Standard method for the determination of environmental radioactivity. Analytical

Methods. Part 2: Residual beta activity index in water by gas flow proportional counterScope : This standard establishes the test method for the measurement of residual beta activity in

any type of water containing non-volatile beta emitting radionuclides with energies higher than 0,1 MeV


Subsector : I19 Registration Date : 2014-04-01

Page 57

Organization : AENORCountry : SpainProject ID : P0042849/0001 Project EstablishedICS :National Ref : PNE 73340-3Title : Standard method for the determination of environmental radioactivity. Analytical

Methods. Part 3: 89Sr and 90Sr activity concentration in soil and sedimentsScope : This standard establishes the test method for the measurement of 89Sr and 90Sr in any type

of soil and sediments of environmental origin, proposing different analytical methods



Subsector I27: EARTH MOVING AND CONSTRUCTION EQUIPMENT

Subsector : I27 (Secondary Subsector)


Organization : TSECountry : TurkeyProject ID : tst12205/0001 Project EstablishedICS : 53.100National Ref :Title : Road RollersScope : This standard, includes the road rollers.

Relatedness :National : NewInternational : Not Equivalent to ISO 5502:1988


** End of Sector **




Sector M : METALLIC MATERIALS


Page 59Subsector M10: METALLIC COATINGS

Subsector : M10 Registration Date : 2014-04-22Organization : TSECountry : TurkeyProject ID : tst04922/0001 Project EstablishedICS : 25.220.40National Ref :Title : Anodic Oxidation Coatings On Aluminium and Wrought Aluminium AlloysScope : This standard covers extrusion profiles flat products bar profile and tubes which are made

from aluminium and wrought aluminium alloys that are coated by anodic oxidation.

Relatedness :National : NewEuropean : Modified BS 3987:1991

Subsector : M10 Registration Date : 2014-04-22Organization : TSECountry : TurkeyProject ID : tst04922/0001 Project EstablishedICS : 25.220.40National Ref :Title : Anodic Oxidation Coatings On Aluminium and Wrought Aluminium AlloysScope : This standard covers extrusion profiles flat products bar profile and tubes which are made

from aluminium and wrought aluminium alloys that are coated by anodic oxidation.



** End of Sector **




Sector N : NON-METALLIC MATERIALS


Page 61Subsector N03: PETROLEUM PRODUCTS

Subsector : N03 Registration Date : 2014-04-01Organization : MSZT Draft Issue Date : 2014-04-02Country : Hungary Latest Date for Comments : 2014-07-02Project ID : 34870615/0001 Project EstablishedICS : 75.160.20National Ref :Title : Light fuel oil for poer station (LFO-P). Requirements and test methods

Relatedness :National : REV/AMD MSZ 11717

Subsector : N03 Registration Date : 2014-04-17Organization : MSZT Draft Issue Date : 2014-04-18Country : Hungary Latest Date for Comments : 2014-07-18Project ID : 34870616/0001 Project EstablishedICS : 75.160.30National Ref :Title : Liquefied petroleum gases. Propane, butane and their mixtures as fuel. Requirements

and test methods

Relatedness :National : REV/AMD MSZ 1601


Subsector N05: TEXTILES

Subsector : N05 Registration Date : 2014-04-10Organization : DINCountry : GermanyProject ID : 06234271/0001 Project EstablishedICS : 59.080.20National Ref : DIN 53829-1Title : Testing of textiles - Determination of the evenness of filament yarns - Part 1: Testing of

the force and extension on the running yarn, principles


Subsector : N05 Registration Date : 2014-04-03Organization : TSECountry : TurkeyProject ID : tst02994/0001 Project EstablishedICS : 59.080.30National Ref :Title : Textiles - Cotton and Cotton - Polyester Woven Sheet, Quiltcase and PillowcaseScope : This standard covers the specifications of woven sheet, quiltcase and pillowcase made of

cotton or cotton-polyester blend.

Relatedness :National : NewInternational : Modified ASTM D 5431:2008

Page 62

Subsector : N05 Registration Date : 2014-04-28Organization : TSECountry : TurkeyProject ID : tst09692/0001 Project EstablishedICS : 61.020National Ref :Title : Textiles-BathrobeScope : This standard covers the specifications of bathrobes made of woven or knitted fabrics.



Subsector N06: RUBBER

Subsector : N06 Registration Date : 2014-04-22Organization : TSECountry : TurkeyProject ID : tst10979/0001 Project EstablishedICS : 23.040.20, 23.040.45National Ref :Title : Plastics Ring or Tubular - Determination of Apparent Tensile Strength Split Disk MethodScope : This standard scopes plastics Ring or Tubular - Determination of Apparent Tensile Strength

Split Disk Method



Subsector N09: PLASTICS

Subsector : N09 Registration Date : 2014-04-18Organization : ASICountry : AustriaProject ID : 00026139/0001 Project EstablishedICS : 59.100.10National Ref : ÖNORM ISO 1887Title : Textile glass - Determination of combustible-matter contentScope : This International Standard specifies a method for the determination of the combustible-

matter content of products made from textile glass, such as continuous-filament yarns, staple-fibre yarns, rovings, chopped Strands, milled fibres, fabrics, and continuous-filament mats and other glass reinforcements.


Subsector : N09 Registration Date : 2014-04-18Organization : ASICountry : AustriaProject ID : 00026140/0001 Project EstablishedICS : 59.100.10National Ref : ÖNORM ISO 3374

Page 63

Title : Reinforcement products - Mats and fabrics - Determination of mass per unit areaScope : This International Standard specifies a method for determining the mass per unit area of

mats or fabrics which may be manufactured with glass or carbon or aramid yarns.


Subsector : N09 Registration Date : 2014-04-18Organization : ASICountry : AustriaProject ID : 00026141/0001 Project EstablishedICS : 59.100.10National Ref : ÖNORM ISO 3375Title : Textile glass - Determination of stiffness of rovingsScope : This International Standard specifies a method for the determination of the stiffness of

textile glass rovings.


Subsector : N09 Registration Date : 2014-04-01Organization : AENORCountry : SpainProject ID : P0042800/0001 Project EstablishedICS :National Ref : PNE 53934Title : Plastics. Elemental analysis in polymeric materials by X-ray fluorescence methodScope : This standard specifies a method of X-ray fluorescence for identification and quantification

of different elements in polymeric materials


Subsector : N09 Registration Date : 2014-04-22Organization : TSECountry : TurkeyProject ID : tst10887/0001 Project EstablishedICS : 83.080.20National Ref :Title : Plastics-Poliycarbonate (PC) and polycarbonate copolymer-Unfilled and reinforcedScope : This standard specifies Plastics-Poliycarbonate (PC) and polycarbonate copolymer


Subsector : N09 Registration Date : 2014-04-22Organization : TSECountry : TurkeyProject ID : tst10887/0001 Project EstablishedICS : 83.080.20National Ref :

Page 64

Title : Plastics-Poliycarbonate (PC) and polycarbonate copolymer-Unfilled and reinforcedScope : This standard specifies Plastics-Poliycarbonate (PC) and polycarbonate copolymer



Subsector N14: PLASTICS PIPES

Subsector : N14 Registration Date : 2014-04-18Organization : ASICountry : AustriaProject ID : 00026134/0001 Project EstablishedICS : 23.040.20National Ref : ÖNORM ISO 8521Title : Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Test

methods for the determination of the apparent initial circumferential tensile strengthScope : This Standard specifies six test methods for the determination of the initial circumferential

tensile wall strength per unit of length of glass-reinforced thermosetting plastics (GRP) pipes.


Subsector : N14 Registration Date : 2014-04-18Organization : ASICountry : AustriaProject ID : 00026135/0001 Project EstablishedICS : 23.040.20National Ref : ÖNORM ISO 12512Title : Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes -

Determination of initial specific ring stiffness and resistance to initial ring deflection using segment test pieces cut from a pipe

Scope : This Standard specifies methods for determining the initial specific ring stiffness and resistance to initial ring deflection of pipes having a nominal size of DN 2000 or larger, using segment test pieces cut from a glass-reinforced thermosetting plastics (GRP) pipe. Two methods are given for determining initial specific ring stiffness, and within the specified deflection limits each is equally valid and may be used for any diameter.


Subsector : N14 Registration Date : 2014-04-18Organization : ASICountry : AustriaProject ID : 00026137/0001 Project EstablishedICS : 23.040.20National Ref : ÖNORM ISO 18851Title : Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and

fittings - Test method to prove the structural design of fittingsScope : This Standard specifies methods of test for fittings of any form i.e. bends, branches, tapers

intended to be used in plastics piping systems for pressure and non-pressure drainage and sewerage or water supply, made of glass-reinforced thermosetting plastics (GRP). This

Page 65

Scope : International Standard is to prove the structural design of the fitting and not any connecting joint system, so it will, for example, include the connection of an integral flange but not a coupling on a spigot ended fitting. It assumes that the fitting either is or is not intended to be subject to the effects of hydrostatic end thrust.


Subsector : N14 Registration Date : 2014-04-18Organization : ASICountry : AustriaProject ID : 00026138/0001 Project EstablishedICS : 23.040.20National Ref : ÖNORM ISO 7685Title : Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes --

Determination of initial specific ring stiffnessScope : This Standard specifies methods for determining the initial specific ring stiffness of glass-

reinforced thermosetting plastics (GRP) pipes. Two methods are given, and within the specified deflection limits each is equally valid and may be used for any diameter.



** End of Sector **




Sector S : HEALTH, ENVIRONMENT AND MEDICAL EQUIPMENT


Page 67Subsector S02: TRANSFUSION EQUIPMENT

Subsector : S02 Registration Date : 2014-04-10Organization : DINCountry : GermanyProject ID : 06301636/0001 Project EstablishedICS :National Ref : 06301636Title : Catheter for medical use - Part 7: Determination of the x-ray attenuation of catheters;

requirements and testing



Subsector S04: PROTECTIVE CLOTHING AND EQUIPMENT

Subsector : S04 Registration Date : 2014-04-28Organization : BSICountry : United KingdomProject ID : 01400982/0001 Project EstablishedICS :National Ref : BS 8610Title : Personal fall equipment. Structural anchors and anchor systems not covered by

BS EN 795



Subsector S09: WATER QUALITY AND WATER SUPPLY

Subsector : S09 Registration Date : 2014-04-10Organization : DINCountry : GermanyProject ID : 11903842/0001 Project EstablishedICS :National Ref : 11903842Title : Dam plants - Part 13: Weirs


Subsector : S09 Registration Date : 2014-04-01Organization : AENORCountry : SpainProject ID : P0042835/0001 Project EstablishedICS :National Ref : PNE 149201Title : Water supply. Sizing of installations inside buildings conveying water.Scope : The document develops a procedure to measure up the water installations inside of

buildings. The technical specifications are applicable to design new systems or to make alterations or restorations.

Page 68



Subsector S15: SURGICAL INSTRUMENTS

Subsector : S15 Registration Date : 2014-04-10Organization : DINCountry : GermanyProject ID : 06301637/0001 Project EstablishedICS :National Ref : 06301637Title : External introducer cannulae for suprapubic catheter systems for single use -

Requirements and testing



Subsector S16: AIDS FOR THE DISABLED

Subsector : S16 Registration Date : 2014-04-10Organization : DINCountry : GermanyProject ID : 05300378/0001 Project EstablishedICS : 11.180.10National Ref : DIN 13000Title : Vehicles for transport in horizontal position - Motor vehicles for the transportation of

handicapped persons only capable of lying



Subsector S24: SOIL QUALITY

Subsector : S24 Registration Date : 2014-04-08Organization : NENCountry : NetherlandsProject ID : 50001881/0001 Project EstablishedICS : 13.030.01National Ref : NEN 6952:2014 Concept nlTitle : Leaching characteristics of solid earthy and stony building and waste materials -

Umbrella standard for the determination of selected elements in solid earthy-, stony building materials, wastes and eluates

Scope : In this umbrellastandard matrix indications for the determination of selected elements in solid earthy and stony building and waste materials, and in eluates obtained according NEN 7340. The application of the specific standards for which elements and in which situations is specified.


Page 69** End of Subsector **

Subsector S27: WASTE - CHARACTERIZATION, TREATMENT AND STREAMS

Subsector : S27 (Secondary Subsector)


Organization : NENCountry : NetherlandsProject ID : 50001881/0001 Project EstablishedICS : 13.030.01National Ref : NEN 6952:2014 Concept nlTitle : Leaching characteristics of solid earthy and stony building and waste materials -

Umbrella standard for the determination of selected elements in solid earthy-, stony building materials, wastes and eluates

Scope : In this umbrellastandard matrix indications for the determination of selected elements in solid earthy and stony building and waste materials, and in eluates obtained according NEN 7340. The application of the specific standards for which elements and in which situations is specified.



Subsector S99: UNDETERMINED

Subsector : S99 Registration Date : 2014-04-10Organization : DINCountry : GermanyProject ID : 06301595/0001 Project EstablishedICS : 11.180.20National Ref : DIN 13222Title : Absorption capacity of absorbent incontinence aids until leakage - Test method for

measuring the suction capacity by use of a test torso


Subsector : S99 Registration Date : 2014-04-08Organization : NENCountry : NetherlandsProject ID : 50001880/0001 Project EstablishedICS : 11.140National Ref : NTA 8096 Concept nlTitle : Matrasses used for beds in health care institutionsScope : NTA 8096 is an a stage of inventarisation. Aspects which are investigated are among other

things: - quality aspects; - life span; - fire safety, microbiology; - user friendliness; - mechanical aspects; - specifications concerning control; - specifications concerning maintenance; - specifications concerning microbiology.



** End of Sector **




Sector T : TRANSPORT, MECHANICAL HANDLING AND PACKAGING


Page 71Subsector T01: SHIPBUILDING AND MARITIME STRUCTURES

Subsector : T01 Registration Date : 2014-04-10Organization : DINCountry : GermanyProject ID : 13202598/0001 Project EstablishedICS :National Ref : 13202598Title : Heavy hinged doors on ships - Part 1: Weathertigth (ISO-type) classification, technical

delivery conditions


Subsector : T01 Registration Date : 2014-04-10Organization : DINCountry : GermanyProject ID : 13202599/0001 Project EstablishedICS :National Ref : 13202599Title : Heavy hinged doors on ships - Part 2: Weathertight (ISO-type), design details


Subsector : T01 Registration Date : 2014-04-10Organization : DINCountry : GermanyProject ID : 13202600/0001 Project EstablishedICS :National Ref : 13202600Title : Heavy hinged doors on ships - Part 3: Weathertight (ISO-type) installation



Subsector T02: AEROSPACE

Subsector : T02 Registration Date : 2014-04-28Organization : BSICountry : United KingdomProject ID : 01401064/0001 Project EstablishedICS :National Ref : BS SP 66 and 67:1955+A2:2012 CorrigendumTitle : Specifications for Cable thimbles for aircraft. Corrigendum


Subsector : T02 Registration Date : 2014-04-10Organization : DIN

Page 72

Country : GermanyProject ID : 13115216/0001 Project EstablishedICS :National Ref : 13115216Title : Aerospace - Anchor nuts with MJ-thread, deep counterbore, self-locking, floating, two

lug, corrosion-resisting steel, classification: 1100 MPa/315 °C/425 °C


Subsector : T02 Registration Date : 2014-04-10Organization : DINCountry : GermanyProject ID : 13115217/0001 Project EstablishedICS :National Ref : 13115217Title : Aerospace - Anchor nuts with MJ thread, deep counterbore, self-locking, floating, single

lug, corrosion-resisting steel, classification: 1100 MPa/315 °C/425 °C


Subsector : T02 Registration Date : 2014-04-10Organization : DINCountry : GermanyProject ID : 13115218/0001 Project EstablishedICS :National Ref : 13115218Title : Aerospace - Nuts, hexagon with MJ thread, captive washer and counterbore, self-

locking, corrosion-resistant steel - Class: 1100 MPa/315 °C/425 °C; Text in German and English


Subsector : T02 Registration Date : 2014-04-10Organization : DINCountry : GermanyProject ID : 13115303/0001 Project EstablishedICS :National Ref : 13115303Title : Aerospace - Alternative materials for fasteners - Solid rivets; Amendment A1; Inactive

for new design



Subsector T14: PACKAGING

Subsector : T14 Registration Date : 2014-04-30Organization : AENORCountry : Spain

Page 73

Project ID : P0042957/0001 Project EstablishedICS :National Ref : PNE 53942Title : Plastics. Plastics bags reuse of polyethylene (PE) for the transport of products

distributed by retail. Requirements and test methodsScope : This standard specifies the features that should have reusable shopping bags made of

polyethylene (PE), intended nothings transport distributed retail products as well as their environmental criteria and test methods for determining such features, for a minimum number of 15 laps under normal conditions of use



Subsector T18: ELEVATING PLATFORMS

Subsector : T18 Registration Date : 2014-04-28Organization : BSICountry : United KingdomProject ID : 01401119/0001 Project EstablishedICS :National Ref : BS 7980:2003+A1:2012 CorrigendumTitle : Vehicle lifts. Installation, maintenance, thorough examination and safe use.

Code of practice. Corrigendum



Subsector T19: ROAD SAFETY

Subsector : T19 Registration Date : 2014-04-01Organization : AENORCountry : Spain Latest Date for Comments : 2014-05-07Project ID : P0042328/0002 Draft for public enquiryICS :National Ref : PNE 135313Title : Vertical signs. Plates of galvanized steel sheet. Characteristics and tests methodsScope : This standard specifies the characteristics and test methods for the galvanized steel sheet

plates used for the vertical signs.

Relatedness :National : REV/AMD UNE 135310:2008, UNE 135313:2008


Subsector T20: TRAM- AND RAILWAY ENGINEERING

Subsector : T20 Registration Date : 2014-04-10Organization : DINCountry : GermanyProject ID : 08701148/0001 Project EstablishedICS :National Ref : 08701148

Page 74

Title : Ahesive bonding of railway vehicles and parts - Part 2: Qualification of manufacturer of adhesive bonded materials



** End of Sector **

2011-06

List of non-electrotechnical subsectors

Sector A: Services

Subsector Title ISO/TC CEN/TC

reference reference

A01 Tourist services / 329; CEN/WS ETO

A02 Cleaning services / 328

A03 Postal services / 331

A04 Transportation services / 320; CEN/WS 016; CEN/WS SCUTUM

A05 Maintenance services / 319

A06 Building and construction services / 330

A07 Translation services /

A08 Funeral services / CEN/BT/TF 139

A09 Facility management / 348

A10 Services of Real Estate Agents / CEN/BT/TF 180; 373

A11 Security Services / CEN/BT/TF 167; 391; 384; 370; CEN/WS 044; CEN/CLC/TC 4

A12 Consultancy Services / 395; 381

A13 Expertise Services / 405

A14 Aesthetic Services / 403;409

A99 Undetermined / CEN/WS 002; CEN/WS 004; CEN/WS 037; CEN/WS 039; CEN/WS 041; CEN/WS 051; 375; 374; 376; 385; 404

Sector B: Building and construction


reference reference

B01 Fire protection 21 70; 72; 191; 192

B02 Structures 59; 98 166; 167; 250; 277; 346; 349; 284; 288; 297; 340

B03 Concrete 71 104; CEN/WS 009

B04 Cement 74; 77 51

B05 Fire tests 92 127

B06 Gypsum / 241

B07 Glass 160 129

B08 Doors and windows 162 33

B09 Thermal matters 163 88; 89; 371; CEN/BT WG 173; CEN/WS 036

B10 Timber structures 165 124

B11 Metal structures 167 135

B12 Masonry 179; 196 125; 246

B13 Solar energy 180 312

B14 Geotechnics 182 341; 396

B15 Sanitary appliances / 163; 7

B16 Taps / /

B17 Lighting equipment and lighting / 50; 169 application technology

B18 Scaffolding / 53

B19 Ceramic tiles 189 67

B20 Drainage equipment / 165

B21 Baths / /

B22 Wallcoverings / 99

B23 District heating / 107

B24 Auxiliary and handicraft work / /

B25 Gas distribution installation and / 234; 235; 282 related equipment

B26 Road building and maintenance / 178; 227

B27 Waterproofing materials / 128; 254; 361; 314

B28 Floor coverings 38/SC 12 134

B29 Aggregates / 154

B30 Floor and surfacing / 217; 303; 323; 390

B31 Heating systems in buildings / 228; 247

B32 Precast concrete products / 177; 229

B33 Building design 205 315; 325; 388

B34 Building and construction – Environmental aspect 350; 351

B99 Undetermined / /

Sector C: Chemicals, chemical engineering and food products


reference reference

C01 Food products 34 174; 275; 302; 360; 307; 327; 338; 387; CEN/WS 008; CEN/WS 018; CEN/WS 054

C02 Paints and related products 35 139; 298; 173

C03 Chemistry 47 317; 363

C04 Laboratory glassware 48 332

C05 Lac / /

C06 Essential oils 54 /

C08 Pesticides 81 /

C09 Surfactants 91 276

C10 Starch 93 /

C11 Tobacco 126 401

C12 Glass plant / /

C13 Fertilizers 134 223; 260

C16 Wood preservatives / /

C17 Trees and plants / /

C18 Adhesives / 193

C19 Chemical analysis 201; 202 382; 347

C20 Explosives and firework / 212; 321

C21 Cosmetics 217 392

C22 Bio-Based products / 411

C99 Undetermined / 386

Sector F: Fundamental standards


reference reference

F01 Technical drawings 10 /

F02 Units & symbols 12 /

F03 Preferred numbers 19 /

F04 Sieves 24 /

F05 Measuring instruments 30; 113 92; 171; 176; 237;

294; 318; 244; 367; 141; CEN/WS 011

F06 Terminology principles 37 /

F07 Documentation and information 46 304; CEN/WS 024 CEN/WS 010 CEN/WS 023 CEN/WS 028 CEN/WS 014 CEN/WS 050 CEN/WS 006 368

F08 Surfaces / 290

F09 Banking 68 /

F10 Statistics 69 /

F12 Information processing systems 204 224; 225; 251; 278; CEN/WS CPF CEN/WS CIS CEN/WS ODR CEN/WS CID 287; 311; 365

F13 Environmental tests / /

F14 Graphical technology, 130 / sign-boards and nameplates

F15 Material testing in general 135 138; CEN/WS 007 CEN/WS 021 CEN/WS 033

F16 Graphical symbols 145 /

F17 Administrative documents 154 CEN/WS MMU

F18 Micrographics 171 /

F19 Optics 172; 187 123; 170

F20 Quality assurance 176 CEN/CLC/TC1 CEN/CLC/WG QS CEN/WS 030 362

F21 Value analysis and project / 279 network

F22 Logistics / 379; 273

F23 Energy 203 CEN/CLC/JWG 1; CEN/CLC/JWG 2;

CEN/CLC/JWG 3; CEN/CLC/JWG 4; CEN/WS 027

F99 Undetermined / 389; CEN/WS 057; CEN/WS 058; CEN/WS 060

Sector H: Products for household and leisure use


reference reference

H01 Cinematography 36 372

H02 Photography 42 /

H03 Consumer questions / 291

H04 Sports equipment 83 136

H05 Oil and gas burners / 47; 131

H06 Horology 114 /

H07 Space heating 116 62; 110; 130; 179; 180

H08 Sizing systems 133; 137 /

H09 Furniture 136 207

H10 Sewing machines 148 /

H11 Heater controls 161 58

H12 Ceramic and glass-ware for food 166 /

H13 Jewellery 174 CEN/WS 047

H14 Caravans 177 245

H15 Toys 181 52

H17 Oil stoves / 46

H18 Central heating boilers / 48; 57; 109; 269

H19 Non-electric cookers and barbecues / 49; 281; 295

H22 Smokers’ lighters and matches / 355; 87

H23 Ladders / 93

H24 Tactile danger warnings / /

H25 Large gas appliances / 106; CEN/CLC/JWG FCGA

H26 Sealing materials / 108; 208

H27 Educational equipment / /

H28 Hunting 191 /

H29 Heat pumps / 113

H30 Equipment for children / 252

H31 Dedicated LPG appliances / 181

H32 Culinary utensils 186 194

H33 Footwear (excluding protective / 309 footwear)

H34 Child safety / CEN/BT/WG 117 398

H99 Undetermined / 299; 364; 369; 402

Sector I: Mechanical engineering


reference reference

I01 Screw threads 1 /

I02 Fasteners 2 185

I03 Limits & fits / /

I04 Rolling bearings 4 /

I05 Iron pipes 5 203

I06 Pressure vessels 11 54

I07 Shafts 14 /

I08 Agricultural machines 23 144, 334

I09 Small tools 29 213

I10 Splines / /

I11 Machine tools 39 142; 143; 145; 255

I12 Pulleys & belts 41 188

I13 Gas containers 58 23; 286

I14 Gears 60 /

I15 Equipment for petroleum industry 67 12

I16 Internal combustion engines 70; 192 270

I17 Machinery in general 72; 199 114; 153; 214; 313 (including safety) 271, 337; 399; 397 CEN/WS 025

I18 Mining 82 196

I19 Nuclear energy 85 /

I20 Refrigeration 86 44; 182

I21 Chains and chain wheels 100 /

I22 Vacuum technology 112 /

I23 Pumps 115 197

I24 Industrial fans 117 356

I25 Compressors 118 232

I26 Plain bearings 123 /

I27 Earth moving and construction 127; 195 151 equipment

I28 Fluid power 131 /

I29 Gas cleaning / 195

I30 Air distribution / 156

I31 Valves 153; 185 69; 236; 105

I32 Flanges / 74

I33 Information processing in 184 310 automation

I34 Non-ferrous metallic pipes / /

I35 Leisure and recreational machines / 152

I36 Thermoprocessing technology / 186

I37 Printing and paper machines / 198

I38 Leather production, tannery and / 200; 201 related machinery

I39 Machines for metal processing / 202; 322

I40 Industrial piping networks / 267

I41 Membrane filters / 272

I42 Potentially explosive atmospheres / 305

I43 Hydrogen energy 197 /

I44 Nanotechnologies 229 352

I99 Undetermined / CEN/CLC/JTF PE; CEN/CLC/TC 2; 65, 157; CEN/WS 059

Sector M: Metallic materials


reference reference

M01 Steel 17 CEN/TC 342; 344; ECISS/TC 6 ECISS/TC 7 ECISS/TC 9 ECISS/TC 10 ECISS/TC 11 ECISS/TC 12 ECISS/TC 13 ECISS/TC 15 ECISS/TC 19 ECISS/TC 20 ECISS/TC 21 ECISS/TC 22 ECISS/TC 23 ECISS/TC 24 ECISS/TC 26 ECISS/TC 27 ECISS/TC 28 ECISS/TC 29 ECISS/TC 5 ECISS/TC 14 ECISS/TC 100 ECISS/TC 102 ECISS/TC 103 ECISS/TC 104 ECISS/TC 105 ECISS/TC 106 ECISS/TC 107 ECISS/TC 108 ECISS/TC 109 ECISS/TC 110

M02 Zinc / 209

M03 Foundry technology, 25 190; ECISS/TC 31 ECISS/TC 111 including cast iron

M04 Copper 26 133

M05 Welding 44 121

M06 Dimensions of wrought products / /

M07 Manganese and chromium 65 /

M08 Light alloys 79 132

M09 Iron ores 102 /

M10 Metallic coatings 107 240

M11 Powder metallurgy 119 /

M12 Aluminium ores 129 /

M13 Ferroalloys 132 /

M14 Nickel 155 /

M15 Metallic corrosion 156 262; 219

M16 Mechanical tests for metals 164 ECISS/TC 1 ECISS/TC 2 ECISS/TC 101

M17 Heavy metal ores 183 /

M18 Metal wire products / ECISS/TC 30; CEN/BT/TF 196; 378; 407

M20 Tin and tin alloys / 220

M21 Precious metals / 283

M22 Lead and lead alloys / 306

M99 Undetermined / /

Sector N: Non-metallic materials


reference reference

N01 Paper and board 6 172

N02 Solid fuels 27 335; 343;383; CEN/WS 019

N03 Petroleum products 28 19; 336; CEN/WS 038; CEN/WS 061

N04 Refractories 33 187

N05 Textiles 38 189; 248

N06 Rubber 45 218; 366 CEN/WS 003

N07 Sawn timber 55 38; 175

N08 Mica / /

N09 Plastics 61 249

N10 Cork 87 /

N11 Wood-based panels 89 112

N12 Timber products 99 /

N13 Leather 120 289

N14 Plastics pipes 138 155

N17 Fluorspar 175 /

N18 Glass-fibre reinforced plastics / /

N19 Tapes / 253

N20 Ceramics 206 184

N21 Gaseous fuels and combustible gas 158; 193 238; 408

N22 Feather and related materials / 222

N23 Diamond / 410

N99 Undetermined / /

Sector S: Health, environment and medical equipment


reference reference

S01 Acoustics and sound 43 126; 211 insulation

S02 Transfusion equipment 76 /

S03 Syringes 84 /

S04 Protective clothing and equipment 94 85; 158; 159; 160; 161; 162; CEN/WS 026; CEN/WS 043

S05 Dentistry 106 55

S06 Vibration & shock 108 231

S07 Anaesthetic and respiratory 121 215 equipment

S08 Air quality 146 137; 243; 264; CEN/CLC/JWG CMI

S09 Water quality and water supply 147 164; 230; CEN/WS 001 CEN/WS 034

S10 Surgical implants 150 285; CEN/CLC/JWG AIMD

S11 Contraceptives 157 /

S12 Gas analysis / /

S13 Ergonomics 159 122

S14 Prosthetics 168 /

S15 Surgical instruments 170 /

S16 Aids for the disabled 173 293

S17 Respiratory protective devices / 79

S18 Sterilization of equipment 198 102; 204

S19 First aid equipment and rescue systems / 239

S20 Waste collection, handling and / 183 transportation

S21 Laboratory medicine, clinical 194 140; 206; 233; pathology and biosafety 257; 258; 316; CEN/CLC/TC 3; CEN/WS 031; CEN/WS 053; CEN/WS 055

S22 Energy saving / CEN/WS 005 CEN/WS 015

S23 Personal & property protection against aggression/Burglary protection / 263

S24 Soil quality 190 345; CEN/WS 032

S25 Chemical disinfectants and / 216 antiseptics

S26 Environmental management 207 CEN/TC 406; CEN/WS 040

S27 Waste - Characterization, treatment / 292; 308; and streams CEN/BT/TF 120

S28 Demining / CEN/WS 029 CEN/WS 013

S99 Undetermined / 205; CEN/BT/TF 127 394; 259; 357; 358; 359; 380; 400; CEN/WS PCEC CEN/WS 012 CEN/WS 020

Sector T: Transport, mechanical handling and packaging


reference reference

T01 Shipbuilding and maritime 8; 188 15; 300 structures

T02 Aerospace 20 274; AECMA; ECSS ;377

T03 Road vehicles 22 301; 326 CEN/WS IMA

T04 Tyres 31 /

T05 Pallets 51 /

T06 Metal and plastic containers 52 210; 221; 265; 266; 268; 296 393

T07 Glass containers 63 /

T08 Cranes 96 147

T09 Materials handling and 101 148; 149 storage equipment

T10 Freight containers 104 119; 280

T11 Steel wire ropes 105 /

T12 Industrial trucks 110 150; 324

T13 Lifting chains, hooks and ropes 111 168

T14 Packaging 122 261; 120

T15 Cycles 149 333

T16 Lifts & escalators 178 10; 242

T17 Builders hoists / /

T18 Elevating platforms / 98

T19 Road safety / 226; 339

T20 Tram- and railway engineering / 256; / CEN/CLC/WG FPR

T21 Packaging machines / 146

T22 Off-road vehicles / 354

T99 Undetermined / CEN/WS TAF

Sector Z: Information technology


Z01 Radiocommunication for IT / /

Z02 Telephony, telegraphy for IT / CEN/CLC - ETSI

Z03 Common O.S.I. activities / CEN/CLC - EWOS

Z99 Undetermined / 353; CEN/WS ADN; CEN/WS AUT; CEN/WS BII; CEN/WS CAT; CEN/WS CST; CEN/WS CTC; CEN/WS DFA; CEN/WS DIR; CEN/WS DIS; CEN/WS DPA; CEN/WS DPP; CEN/WS EBE; CEN/WS ECH; CEN/WS ECO; CEN/WS EFI; CEN/WS EMD; CEN/WS ESI; CEN/WS ESR; CEN/WS EUR; CEN/WS FAS; CEN/WS FIN; CEN/WS FS2; CEN/WS FUN; CEN/WS GEN; CEN/WS HIC; CEN/WS ICT; CEN/WS IEC; CEN/WS IHM; CEN/WS INV2; CEN/WS ISD; CEN/WS JXF; CEN/WS KMA; CEN/WS LCT; CEN/WS LTS; CEN/WS MDC; CEN/WS MEE; CEN/WS MES; CEN/WS MET; CEN/WS MLX; CEN/WS MMI; CEN/WS NEA; CEN/WS NOM; CEN/WS ORC; CEN/WS POR; CEN/WS QIS; CEN/WS SAN; CEN/WS SCE; CEN/WS TEX; CEN/WS TWE; CEN/WS UDP; CEN/WS URI; CEN/WS WAC;

CEN/WS XFS; CEN/WS XML; CEN/WS eGo; CEN/WS eIN; CEN/WS ePR

REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC

April 2014

Issued on : 05 May 2014

Page 1

Information Procedure on Standards

Notifications registered at CCMC during April 2014

Sector W : ELECTRICAL ENGINEERING

Register issued on : 05 May 2014

Page 2Subsector W08: ELECTRIC CABLES

Subsector : W08 Registration Date : 2014-04-28Organization : BSICountry : United KingdomProject ID : 01401060/0001 Project EstablishedICS :National Ref : BS 6724Title : Electric cables. Thermosetting insulated, armoured cables for voltagesof 600/1

000 V and 1 900/3 300 V, having low emission of smoke andcorrosive gases when affected by fire


Subsector : W08 Registration Date : 2014-04-28Organization : BSICountry : United KingdomProject ID : 01401062/0001 Project EstablishedICS :National Ref : BS 5467Title : Electric cables. Thermosetting insulated, armoured cables for voltages of 600/1

000 V and 1 900/3 300 V


Subsector : W08 Registration Date : 2014-04-28Organization : BSICountry : United KingdomProject ID : 01401118/0001 Project EstablishedICS :National Ref : BS 7846Title : Electric cables. Thermosetting insulated armoured fire resistant cablesof

rated voltage 600/1 000 V, for fixed installations, having lowemission of smoke and corrosive gases when affected by fire. Specification


Subsector : W08 Registration Date : 2014-04-01Organization : AENORCountry : SpainProject ID : P0042802/0001 Project EstablishedICS :National Ref : PNE 211030Title : Cables with thermoplastic compound or halogen-free thermoplastic compound insulation

to be used in interconnection circuits for household audio equipment.Scope : The aim of this standard is to define the requirements and characteristics to be comply by

unsheathed separable flat cables and with thermoplastic compound or halogen-free thermoplastic compound insulation to be used in interconnection circuits for household audio equipment

Page 3

Relatedness :National : REV/AMD EA 0006:2002

Subsector : W08 Registration Date : 2014-04-01Organization : AENORCountry : SpainProject ID : P0042868/0001 Project EstablishedICS :National Ref : PNE 211025Title : Cables with intrinsic resistance to fire and intended for use in emergency circuits.Scope : This standard defines the requirements and tests to be complied by cables with rated

voltage 300/500 V and 0,6/1 kV and intrinsic resistance to fire to be used in emergency circuits, such as signaling circuits, detection and alarm circuits for evacuation services and fire fighting, etc..


Subsector : W08 Registration Date : 2014-04-01Organization : AENORCountry : SpainProject ID : P0042873/0001 Project EstablishedICS :National Ref : PNE 21161Title : Cables for AGL constant current series circuits.Scope : This standard defines the constructive requirements, the test methods and the utilization

conditions for cables for AGL constant current series circuits, including the requirements regarding the resistant to flame.



Subsector W27: ELECTRICAL INSTALLATIONS IN BUILDINGS

Subsector : W27 Registration Date : 2014-04-01Organization : AENORCountry : Spain Latest Date for Comments : 2014-05-07Project ID : P0042005/0002 Draft for public enquiryICS :National Ref : PNE 202009-12 INTitle : Guidelines for verification and inspection of low voltage electrical installations at

common zones of apartment buildingsScope : This report defines a methodology for periodic verifications and inspections of electrical

installations at residential buildings.

Relatedness :National : REV/AMD UNE 202009-12:2013 IN

Subsector : W27 Registration Date : 2014-04-01Organization : AENOR

Page 4

Country : SpainProject ID : P0042837/0001 Project EstablishedICS :National Ref : PNE 202012 INTitle : Guidance to the maintenance contract of electrical installationsScope : This report is aimed to provide guidance for the preparation and application of the

maintenance contract of low voltage electrical installations for which the Spanish wiring rules require such contract



** End of Sector **

List of Subsectors covering work items in CENELEC’s field of activity

(version 2009-05-15)

(Rows or committees shaded in blue indicate changes compared to the last list of subsectors )

U GENERAL ELECTROTECHNICAL STANDARDS

Title IEC TC CLC TC

U01 INFORMATION STRUCTURES, DOCUMENTATION AND GRAPHICAL SYMBOLS

IEC TC 3 IEC SC 3C IEC SC 3D

U02 ALUMINIUM CONDUCTORS. IEC TC 7

U03 SYSTEM ASPECTS FOR ELECTRICAL ENERGY SUPPLY IEC TC 8 CLC TC 8X

U04 ELECTRICAL FLUIDS. IEC TC 10 BTTF 116-1

U05 ELECTRICAL INSULATING MATERIALS AND SYSTEMS. IEC TC 15 IEC TC112

U06 MAN-MACHINE INTERFACE, MARKING AND IDENTIFICATION MARKINGS.

IEC TC 16

U07 LETTER SYMBOLS FOR ELECTROTECHNOLOGY. IEC TC 25

U08 ELECTRIC WELDING. IEC TC 26 CLC TC 26A CLC TC 26B

U09 INSULATION CO-ORDINATION. IEC TC 28 IEC TC 109

U10 HIGH-VOLTAGE TESTING. IEC TC 42

U11 ENVIRONMENTAL TESTING OF ELECTROTECHNICAL EQUIPMENT

IEC TC 89 IEC TC 104

U12 RELIABILITY. IEC TC 56

U15 MAGNETIC ALLOYS. IEC TC 68

U16 PROTECTION BY ENCLOSURES. IEC TC 70

U17 SHORT CIRCUIT CURRENTS. IEC TC 73

U18 ENVIRONMENTAL STANDARDIZATION - GENERAL IEC TC 111 CLC TC 111X

U19 RADIO INTERFERENCE, EMC IEC TC 77 + SCs CISPR + SCs

CLC TC 210

U20 SUPERCONDUCTIVITY IEC TC 90

U21 NANOTECHNOLOGY IEC TC 113

U91 QUALITY ASSURANCE ISO TC 176 BTTF 76-3

U92 ADVANCED CERAMICS IEC TC *

U93 ELECTROMAGNETIC HAZARDS IEC TC 106 CLC TC 106X

U94 PUBLIC PROCUREMENT MATTERS CLC TC 218

U95 ENVIRONMENTAL MATTERS BTWG 132-3

U96 USABILITY & SAFETY OF ELECTRICAL PRODUCTS WITH REFERENCE TO PEOPLE WITH SPECIAL NEEDS

BTWG 101-5

U99 UNDETERMINED. (ex: terminology) IEC TC 1

V ELECTRONIC ENGINEERING

Title IEC TC CLC TC

V01 RADIOCOMMUNICATIONS AND CABLE NETWORKS IEC TC 103 CLC TC 209

V02 ELECTRICAL MEASURING EQUIPMENT. IEC TC 13 CLC TC 13 BTWG 105-2

V03 ELECTROACOUSTICS AND ULTRASONICS. IEC TC 29 IEC TC 87

V04 INSTRUMENT TRANSFORMERS. IEC TC 38 CLC TC 38X

V05 ELECTRONIC TUBES. IEC TC 39

V06 CAPACITORS AND RESISTORS. IEC TC 40 CLC TC 40XA CLC TC 40XB

V07 NUCLEAR INSTRUMENTATION. IEC TC 45 IEC SC 45A IEC SC 45B

CLC TC 45AX CLC TC45B

V08 CABLES AND WIRES FOR TELECOMMUNICATIONS IEC TC 46 + SCs CLC TC 46X + SCs

V09 SEMICONDUCTORS. IEC TC 47 + SCs IEC TC 110

V10 ELECTROMECHANICAL COMPONENTS. IEC TC 48 + SCs IEC TC 91

BTWG 117-1

V11 PIEZOELECTRIC DEVICES. IEC TC 49

V12 MAGNETIC COMPONENTS. IEC TC 51

V13 PRINTED CIRCUITS.

V15 ELECTROMEDICAL EQUIPMENT. IEC TC 62 + SCs CLC TC 62

V16 PROCESS CONTROL. IEC TC 65 + SCs CLC TC 65CX BTWG 109-2

V17 ELECTRONIC MEASURING EQUIPMENT. IEC TC 66 IEC TC 85

BTTF126-1

V18 AUTOMATIC CONTROLS. IEC TC 72 CLC TC 72

V19 SAFETY OF DATA PROCESSING EQUIPMENT. Merged into V24

V20 RADIATION SAFETY AND LASER EQUIPMENT. IEC TC 76 CLC TC 76

V21 ALARM SYSTEMS. IEC TC 79 CLC TC 79

V22 NAVIGATIONAL INSTRUMENTS. IEC TC 80

V23 PHOTOVOLTAIC SYSTEMS. IEC TC 82 CLC TC 82

V24 INFORMATION TECHNOLOGY EQUIPMENT AND AUDIO, VIDEO AND AUDIO-VISUAL EQUIPMENT AND SYSTEMS

IEC TC 100 + TAs

IEC TC 108

JTC1/25 & 26

CLC TC 108X CLC TC 205 + SC CLC TC 206 CLC TC 215 CLC/JTC 1

V27 AUDIO, VIDEO AND AUDIO-VISUAL EQUIPMENT AND SYSTEMS

Merged with V24

V28 FIBRE OPTICS. IEC TC 86 + SCs

CLC TC 86A CLC TC 86BXA

V30 DESIGN AUTOMATION IEC TC 93

V31 SURFACE TRANSPORT ELECTROTECHNICAL SYSTEMS

BTTF 69-3

V32 AVIONICS IEC TC 107 CLC TC 107X

W ELECTRICAL ENGINEERING

Title IEC TC CLC TC

W01 ELECTRIC ROTATING MACHINES. IEC TC 2 CLC TC 2

W02 TURBINES: Hydraulic, steam, wind and marine energy IEC TC 4 IEC TC 5 IEC TC 88 IEC TC 114

CLC TC 88

W03 ELECTRIC TRACTION EQUIPMENT. IEC TC 9 CLC TC 9X + SCs

W04 OVERHEAD ELECTRIC LINES. IEC TC 11 CLC TC 11 BTTF 129-1 BTTF 132-1

W05 POWER TRANSFORMERS. IEC TC 14 CLC TC 14

W06 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR. IEC TC 17 IEC SC 17A IEC SC 17C

CLC TC 17AC

W07 ELECTRICAL INSTALLATIONS IN SHIPS. IEC TC 18 IEC SC 18A

W08 ELECTRIC CABLES. IEC TC 20 CLC TC 20

W09 SECONDARY BATTERIES. IEC TC 21 IEC SC 21A

CLC TC 21X

W10 POWER ELECTRONICS. IEC TC 22 + SCs CLC TC 22X

W11 ELECTRICAL ACCESSORIES. IEC TC 23 + SCs CLC TC 23BX CLC TC 23E CLC TC 213 BTWG 112-1 BTTF 129-2

W12 ELECTROHEAT. IEC TC 27

W13 EQUIPMENT FOR EXPLOSIVE ATMOSPHERES. IEC TC 31 + SCs

IEC TC 101 CLC TC 31 + SCs

CLC TC 216

W14 FUSES. IEC TC 32 IEC SC 32A

W15 POWER CAPACITORS. IEC TC 33

W16 LAMP AND LUMINAIRES. IEC TC 34 + SCs

CLC TC 34Z

W17 PRIMARY BATTERIES. IEC TC 35

W18 INSULATORS. IEC TC 36 + SCs

CLC TC 36A

W19 SURGE ARRESTERS. IEC TC 37 + SCs

CLC TC 37A

W20 ELECTRICAL RELAYS. IEC TC 94 IEC TC 95

(CLC TC 94)1

W22 ELECTRICAL EQUIPMENT OF MACHINE TOOLS. IEC TC 44 CLC TC 44X

W23 WINDING WIRES. IEC TC 55 CLC TC 55

W24 TELECONTROL SYSTEMS. IEC TC 57

W25 DOMESTIC APPLIANCE PERFORMANCE. IEC TC 59 + SCs CLC TC 59X

W26 DOMESTIC ELECTRICAL APPLIANCES AND MOTOR-OPERATED ELECTRIC TOOLS

IEC TC 61 + SCs

TC 116 CLC TC 61 CLC TC 116 BTTF 128-1

W27 ELECTRICAL INSTALLATIONS IN BUILDINGS. IEC TC 64 CLC TC 64 BTTF 62-3

W28 ELECTRIC VEHICLES. IEC TC 69

W29 ELECTRICAL INSTALLATIONS FOR OUTDOOR SITES

W30 LIVE WORKING. IEC TC 78 CLC TC 78

W31 LIGHTNING PROTECTION. IEC TC 81 CLC TC 81X

W32 LOW-VOLTAGE POWER TRANSFORMERS. IEC TC 96

W33 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR. IEC TC 17 IEC SC 17B IEC SC 17D

CLC TC 17B (CLC TC 17D)

1

W34 LOW-VOLTAGE FUSES. IEC SC 32B IEC SC 32C

W35 SYSTEM ENGINEERING AND ERECTION OF ELECTRICAL POWER INSTALLATIONS

IEC TC 99 CLC TC 99X

W36 ELECTRICAL INSTALLATIONS FOR LIGHTING AND BEACONING OF AERODROMES

IEC TC 97 CLC TC 97

W37 FUEL CELL TECHNOLOGIES IEC TC 105

W38 SAFETY OF ELECTROSTATIC PAINTING AND FINISHING EQUIPMENT

CLC TC 204

W39 HIGH VOLTAGE DIRECT CURRENT (HVDC) TRANSMISSION TECHNOLOGY

IEC TC 115

Z IT MATTERS NOT COVERED BY OTHER SUBSECTORS

Z01 CENELEC/ETSI EMC conducted transmission networks JWG EMC

Z02 WORK IN THE FIELD OF ISO/IEC JTC 1 AND SUB-COMMITTEES JTC 1, except WG 25 & 26

1 Dormant

List of symbols typically used by National Committees for their national standards references

CLC REF

EN 55020:2002 EN 55020:2002/A1:2003 Draft Standards

AT ÖVE/ÖNORM EN 55020+A1+A2 ÖVE/ÖNORM EN 55020+A1+A2 E or ENTWURF

BE NBN EN 55020/1:2003 NBN EN 55020/1:2003 PR NBN

CH SN EN 55020:2002 SN EN 55020:2002/A1:2002

CY CYS EN 55020:2002 CYS EN 55020:2002-iss1

CZ CSN EN 55020 ED. 2 CSN EN 55020 ED. 2/A1

DE DIN EN 55020 (VDE 0872-20) DIN EN 55020 (VDE 0872-20) Reference of the future standard or work item number, ex: 02218905

DK DS/EN 55020:2005 DS/EN 55020/A1:2005 Reference of the future standard

EE EVS-EN 55020:2002 EVS-EN 55020:2003/A1:2003 Reference of the future standard

ES UNE-EN 55020:2004 UNE-EN 55020-A1:2004 PNE

FI SFS-EN 55020:2002 SFS-EN 55020:2000/A1:2003 Reference of the future standard

FR NF EN 55020 NF EN 55020/A1 PR NF

GB BS EN 55020:2002 BS EN 55020:2002+A1:2003 Reference of the future standard

GR ELOT EN 55020:2002 ELOT EN 55020/A1:2003 Reference of the future standard

HU MSZ EN 55020:2004 MSZ EN 55020:2004 PR I.S. or Reference of the future standard

IE I.S. EN 55020:2005 I.S. EN 55020/A1:2005

IS IST EN 55020:2002 IST EN 55020:2002/A1:2003

IT CEI EN 55020:2003 CEI EN 55020/A1:2003 Reference of the future standard

LT LST EN 55020+A1:2003 LST EN 55020+A1:2003

LU** EN 55020:2002 EN 55020:2002/A1:2003

LV LVS EN 55020:2002 LVS EN 55020:2002 /A1:2003

MT MSA EN 55020:2002 MSA EN 55020:2002/A1:2003

NL NEN-EN 55020:2002/C12:2005 NEN-EN 55020:2002/A1:2003/C11:2005 ONTWERP NEN

NO NEK EN 55020:2002 NEK EN 55020:2002/A1:2003

PL PN-EN 55020:2003 PN-EN 55020:2003/A1:2003

PT NP EN 55020:2002 NP EN 55020:2002/A1:2003 PR NP

RO SR EN 55020:2003 SR EN 55020:2003/A1:2004

SE SS-EN 55020 SS-EN 55020/A1:2003 Reference of the future standard

SI SIST EN 55020:2003 SIST EN 55020:2003/A1:2003

SK STN EN 55020:2002 STN EN 55020/A1:2003

** Luxembourg applies the CENELEC reference number without a national prefix

Documents

Λευκωσία Μαϊου - CCCI · Eurocode 1: Actions on structures. Part 1-7. Accidental actions. Amendment Relatedness : National : New Subsector : B02 Registration Date : 2014-04-28