Ideal for:

Onshore Offshore Marine

FA150 Dedicated Man Rider® Air Winch150 kg (330 lb)

Slack wire detector automatically stops the winch from paying out in case of slack wire

Radial piston air motor provides reliable power with adjustable speed for any use

Lift-to-Shift variable speed lever provides precise control and built-in safety

Marine 812 finish paint standard for enhanced corrosion resistance

Drum guard standard to protect operator

Filter, regulator, lubricator air preparation package included to protect internal components

FA150 Dedicated Man Rider® Air Winch150 kg (330 lb)

Ingersoll Rand FA150 Man Rider® winches are specifically designed for safe and reliable personnel lifting. They feature a tough steel frame with protection for critical components and marine grade paint to stand up to harsh environments. Their rugged radial piston air motors provide reliable power under all conditions. FA150 Man Rider® winches include multiple fail-safe features to help keep your personnel safe. Designed to meet the latest regulations including CE, ATEX and DNV type approval, Ingersoll Rand FA150 Man Rider® winches work wherever you do. Built with our decades of experience, count on Ingersoll Rand’s time-proven design wherever you need to lift or lower people.

Bolt Pattern

DRUM

B

A

CB

254 [10.0]

305 [12.0]

483[19.0]

273[10.75]

579 [22.8]

40.2[1021]

720[28.3]

13 [.50]ø17 [.69]

356[14.0]

508 [20.0]51 [2.0]610 [24.0] 41

[1.6]

AIR INLET3/4” NPT

MOTOR EXHAUST 3/4” NPT

132 [5.2 ]

1129 [44.5]

LIMITSWITCH

Models Amm (in)

Bmm (in)

Cmm (in)

Total Number of Holes

FA150 508 (20.0) 229 (9.0) 18 (0.69) 6

Dimensions shown are mm. Dimensions in Brackets [ ] are inches. Dimensions are subject to change. Contact factory for certified drawings.

Emergency lowering system

Stainless steel hose package

General Performance. Performance based on a 10:1 design factor

Model

Line Pull Capacity Line Speed

First Layer kg (lb)

Mid Drumkg (lb)

Top Layer kg (lb)

First Layer m/min (fpm)

Mid Drumm/min (fpm)

Top Layer m/min (fpm)

FA150KGiMR 150 (330) 150 (330) 150 (330) 25 (82) 27 (89) 29 (95)

(1) Recommended minimum breaking force of wire rope based on top layer line pull rating.(2) Drum Capacity is based on tightly wound wire rope. Recommended drum working capacity is 80% of values shown.(3) Max storage capacity is tightly wound with no freeboard.

General Characteristics. Performance at 6.3 bar (90 psi) air inlet pressure with the motor running

Motor Lifting Speed at Top Layer

Air Consumptionwith Rated Load

Air Volume Needed to Move

Rated Load at Top Layer

Sound Level as per EN 14492-1

Net Weight

Model kW (hp) m/min (f/fpm) m3/min (ft3/min) 3 m (10 ft) dB(A) kg (lb)

FA150KGiMR 1.5 (2) 29 (95) 14 (50) 0.4 (17.2) 89 340 (750)

Drum Capacity

Model

Minimum Rope Breaking Force(1)

Recommended Rope Diameter

Drum Capacity per Layer(2)

m (ft)kN (lbs) mm (in) Layer 1 Layer 2 Layer 3 Layer 4 Layer 5

FA150KGiMR 14.7 (3,300) 10 (7/16) 26 (77) 54 (161) 84 (249) 115 (344) 148 (445)

Model Layer 6 Layer 7 Layer 8 Layer 9 Layer 10 Layer 11

Max. Rope Storage Capacity(3)

m (ft)

FA150KGiMR 183 (551) 220 (663) 259 (780) 299 (904) 341 385 385 (904)

Drum guard with manual rope guide

Available Options

For more options or custom configuration, please contact us at www.ingersollrandproducts.com/lifting or lifting@irco.com

For More Information www.ingersollrandproducts.com/lifting lifting@irco.com

www.ingersollrandproducts.com © 2015 Ingersoll Rand IRITS-0615-052

Ingersoll Rand, IR, the IR logo and Impactool are trademarks of Ingersoll Rand, its subsidiaries and/or affiliates. All other trademarks are the property of their respective owners. Nothing contained on these pages is intended to extend any warranty or representation, expressed or implied, regarding the product described herein. Any such warranties or other terms and conditions of sale of products shall be in accordance with Ingersoll Rand’s standard terms and conditions of sale for such products, which are available upon request. Product improvement is a continuing goal at Ingersoll Rand. Designs and specifications are subject to change without notice or obligation. Unless otherwise noted this equipment is not designed for transporting people or lifting loads over people. It is the user’s responsibility to determine the suitability of this product for any particular use and to check compliance with applicable regulations. Before installation, see maintenance and operations manual for additional warnings and precautions.

Drum Length(in)12

Drum BrakeA Auto drum brake

Control 1 Std. winch mounted

Options7 Drum grooving; specify rope size in sixteenths, e.g., 7 = 7/16"A Drum guard with manual rope guideB Winch pedestal baseC1M3 -20 ̊C ABSC2M3 -20 ̊C DNVH Stainless steel hose package for limit switchK Stowage valve kit installed on winchM1 (1) Per DIN 50049/EN10204 Para 2.2 “Typicals”M2 (1) Per DIN 50049/EN10204 Para 3.1 actual per product as purchasedM3 (1) Per DIN 50049/EN10204 Para 3.1 actual per product as delivered in final condition N4 Manufactured under ABS survey N5 Manufactured under DNV survey P1 Marine 812-X paint systemP2 Marine 812-X paint system - isocyanate freeR Emergency lowering systemW1 ABS witness testW2 DNV witness testW3 LRS witness testW4 Client witness of load test-CE Compliance with the European Machinery

Directive and EN14492-1 for power driven winches

NOTE:(1) M1 – Material traceability certificates according to EN 10204 (Ex DIN 50049) 2.2 on load bearing parts.

This conformity document affirms (by the manufacturer) that parts are in compliance with the requirements of the order based on non-specific inspection and testing (i.e., results are typical material properties for these parts).

M2 – Material traceability certificates according to EN 10204 (Ex DIN 50049) 3.1b on load bearing parts. These documents affirm (by a department independent of the manufacturing department) that the actual parts used in the product are in compliance with the order based on specific inspection and testing (i.e., results are actual material properties for those parts).

M3 – Material traceability certificates according to EN 10204 (Ex DIN 50049) 3.1b on load bearing parts. These documents affirm (by a department independent of the manufacturing department) that the actual parts used in the product are in compliance with the order based on specific inspection and testing (i.e., results are actual material properties for those parts in a finished, as delivered condition).

Personnel Capacitykg (lb)150KGi 150 (330)

MR 12 A 1 BHRP1150KGiFA

SeriesFA Air powered

-

Man Rider®MR Man Rider®

How to Order

Seattle, USA

Charlotte, USA

Brazil

Moscow, Russia

Australia

Johannesburg, South Africa

United Arab Emirates

Singapore

Shanghai, China

Korea

Brussels, BelgiumManchester, UK

Douai, France

Mexico City

Oberhausen, Germany

JapanHouston, USA

Edmonton, Canada

A Tradition of Proven Reliability, Efficiency and Productivity

No matter where you are located, Ingersoll Rand is committed to serving and providing you with the necessary information with regard to our products and services. Our world-wide network of distributors, certified technicians and engineers are a telephone call away — ready to support you with innovative and cost-effective solutions that will keep your business running at peak performance.