Upload
vanthuan
View
213
Download
0
Embed Size (px)
Citation preview
1
Content
1. General Guidelines for Sourcing of Fabric……………………………….02 2. Fabric Specifications.………………………………….…………………...03 3. List of Fabric Defects……………………………………………………….27 4. Specifications for Packing………………………………………………….28 5. Distribution of Uniform…………………………………………………… .. 29 6. Designs of Uniform (Design sketch of Fabric Pack) …………………... 30
2
General Guidelines for Sourcing of Fabrics
1. Fabric samples along with shade band and lab dips have to be approved prior to bulk production.
2. The shade band and lab dips will have to be approved before the
commencement of fabric production. The shade will be matched visually. Any shade variation, from the approved shade will not be acceptable.
3. Test report will have to be attached along with samples.
4. All testing should be carried out by an independent accredited agency
nominated by GETCO.
5. Lot wise Test report for the mentioned parameter will have to be submitted before dispatch of fabric
6. Fabric will be in the form of packed cut pieces as per specifications of Fabric
pack No. 4/5/6/7/8 (Each applicable for the respective product)
7. Trims specified in the respective sheets are also to be enclosed in the same pack, refer fabric Pack No. 5 & 8
8. No fabric defect of any nature is permissible in the fabric pack, refer Annexure
No. 1
9. Fabric has to comply with all the mentioned test standards
10. Packing is as per the Annexure No. 2
11. Each Fabric Pack must be traceable to the lot Number.
12. Shade variation within the same piece is strictly unacceptable.
13. The fabric will be accepted only after a pre dispatch inspection by an independent accredited agency nominated by GETCO
14. Any other guideline that might be laid down to ensure the best quality of fabric
/garment/ trim/accessory being procured.
15. All types of Fabric designs are available at office of the CE(Project), Gujarat Energy Transmission Corporation Limited, 8th Floor, Sardar Patel Vidyut Bhavan, Race Course Circle, Vadodara, Gujarat.
3
Fabric Specification
Fabric pack: 4
Garment type: Kurta
Category of staff: Female Length of fabric: 2.00 mts per pack
Trim/ accessory: Dupatta as per Pack -6
Sketch of Design Yes Sr. No. Name of company Color code 1 GETCO As per Sample
Page 4.1of 3
4
Fabric pack: 4
Standard No. Tolerance
Type CVC shirting
Content/ composition 100% Cotton
Weave Plain
EPI (Finished) 140
+/- 5%
PPI (Finished) 80 +/- 5%
Yarn count Warp 50s 100% cotton
Weft 50s 100% cotton
Yarn Type Warp 100% Cotton
Weft 100% Cotton
Width 150 cm +/- 1 cm
Weight in gms per sqm (GSM) 118 ASTM D - 3776 +/- 5%
Crease Recovery Angle
Warp + Weft >220 AATCC – 66 +/- 2%
Breaking Strength on 20cmx5 cm strip , Kgf
Warp 37.5 Kg ASTM D 5034 +/- 5%
Weft 22 Kg
Tear strength Warp 1000 gm
ASTM-D-1424
Weft 780 gm
Seam Slippage Warp Wt Kg 12
ASTM D - 434 >7 Weft Wt kg >20
Random Pilling Rating 4 ASTMD – 3512
Page 4.2of 3
Fabric specifications
5
Fabric pack: 4
Fabric should confirm following quality standards:
Tests
Test Method Acceptable
standard
Color fastness
Fastness to sun light AATCC-16E 3
Washing @ 490 C
(Color Change) AATCC-61-2A 4
Water @ 370 C (Color
Change) AATCC-107 4
Dry Rub AATCC-8 4
Wet Rub AATCC-8 3
Heat press AATCC-133 4
Perspiration AATCC-15 4
DP Rating AATCC 124 +/- 1%
Bow ASTM D 3882 1.5%
Skew (after 3 wash) AATCC-179 1.2%
Absorbency Drop test <10 Sec
Note: Banned dyes / chemicals not to be used Value for test results: 5: Negligible 4: Slight 3: Noticeable 2: Considerable 1: Sever
Page 4.3 of 3
6
Fabric pack: 5
Garment type: Salwar
Category of staff: Female Length of fabric: 2.00 mts per pack
Trim/ accessory: Nil
Sketch of Design Yes
Sr. No. Name of company Color code 1 GETCO As per Sample
Page 5.1of 3
7
Fabric pack: 5
Standard No. Tolerance
Type CVC shirting
Content/ composition 100% Cotton
Weave Plain
EPI (Finished) 140
+/- 5%
PPI (Finished) 80 +/- 5%
Yarn count Warp 50s 100% cotton
Weft 50s 100% cotton
Yarn Type Warp 100% Cotton
Weft 100% Cotton
Width 150 cm +/- 1 cm
Weight in gms per sqm (GSM) 118 ASTM D - 3776 +/- 5%
Crease Recovery Angle
Warp + Weft >220 AATCC – 66 +/- 2%
Breaking Strength on 20cmx5 cm strip , Kgf
Warp 37.5 Kg ASTM D 5034 +/- 5%
Weft 22 Kg
Tear strength Warp 1000 gm
ASTM-D-1424
Weft 780 gm
Seam Slippage Warp Wt Kg 12
ASTM D - 434 >7 Weft Wt kg >20
Random Pilling Rating 4 ASTMD – 3512
Page 5.2of 3
Fabric specifications
8
Fabric pack: 5
Fabric should confirm following quality standards:
Tests
Test Method Acceptable
standard
Color fastness
Fastness to sun light AATCC-16E 3
Washing @ 490 C
(Color Change) AATCC-61-2A 4
Water @ 370 C (Color
Change) AATCC-107 4
Crocking Dry Rub AATCC-8 4
Crocking Wet Rub AATCC-8 3
Heat press AATCC-133 4
Perspiration AATCC-15 4
DP Rating AATCC 124 +/- 1%
Bow ASTM D 3882 1.5%
Skew (after 3 wash) AATCC-179 1.2%
Absorbency Drop test <10 Sec
Note: Banned dyes / chemicals not to be used Value for test results: 5: Negligible 4: Slight 3: Noticeable 2: Considerable 1: Sever
Page 5.3 of 3
9
Fabric pack: 6
Garment type: Dupatta Style Screen Printed
Category of staff : Female Length of fabric : 2.50 mts per Pack
Trim/ accessory: no Sketch of Design No
S. No. Name of company Color code 1 GETCO As per Sample
Page 6.1 of 3
10
Fabric pack: 6
Standard No. Tolerance
Type Chiffon (Dupatta)
Content/ composition 100 % polyester AATCC-20/20A 0 %
Weave Plain
EPI (Finished) 80 ASTM-D-3775
+/- 5%
PPI (Finished) 70 +/- 5%
Yarn count & type (Body)
Warp Filament polyester yarn 100/36 denier /twist 1800/S 100/36 denier /twist 1800/Z
ASTM-D-3775 0%
Weft Filament polyester yarn 100/36 denier /twist 1800/S 100/36 denier /twist 1800/Z
AATCC-20/20A 0%
Width 115 cm +/- 1 c.m.
Weight in GSM 70 to 75 ASTM D - 3776 +/- 5%
Breaking Strength on 20cmx5 cm strip , Kgf
Warp 19.6 kg ISO-5081 +/- 5%
Weft 13.2 kg
Tear strength ( KMI tear tester
Warp 3520 grms Pendulum test method
+/- 2%
Weft 3392 grms +/- 2%
Length 2.50 mts. +/-2 cm
Print (3 color) As per design 0%
Border Dyed to matching with print
Page 6.2 of 3
Fabric specification
11
Fabric pack: 6
Fabric should confirm following quality standards:
Tests Test Method
Acceptable standard
Colour fastness
Fastness to sun light AATCC-16 5
Washing AATCC-61-2003 5
Crocking AATCC-8 5
Heat press AATCC-133 5
Perspiration AATCC-15-2002 5
Dimensional stability (After 3 cycles)
AATCC 135-2003 2%
Bow/ skew ASTM D 3882 2%
Abrasion, 10000 cycles ASTM D 4966
Shade change
5
Pilling 5
Washing shrinkage % Length
IS 63301A 2% (Max)
Width 1%
*Note: Banned dyes / chemicals not to be used Value for test results: 5: Negligible 4: Slight 3: Noticeable 2: Considerable 1: Sever
Page 6.3 of 3
12
Fabric pack: 7
Garment type : Sari Style Printed sari
Category of staff : Female Length of fabric : 5.50 mts per sari
Trim/ accessory: Matching Blouse pc. As per Pack- 8
Sketch of Design no
S. No. Name of company Color code 1 GETCO As per Sample
Page 7.1of 3
13
Fabric pack: 7
Standard No. Tolerance
Type Orient georgette polyester
Content/ composition 100 %polyester with viscose border
AATCC-20/20A 0 %
Weave Plain + jacquard
EPI (Finished) 105 ASTM-D-3775
+/- 5%
PPI (Finished) 80 +/- 5%
Yarn count & type (Body)
Warp ( Finished)
Semi-dull Filament polyester yarn 80/36/2000-2200/S 80/36/2000-2200/Z
IS 3442
0%
Weft ( Finished)
Semi-dull Filament polyester yarn 80/36/2000-2200/S 80/36/2000-2200/Z
0%
Yarn count & type (Border)
Warp
Semi-dull Filament polyester yarn 80/36/2000-2200/S 80/36/2000-2200/Z
AATCC-20/20A 0%
Width 113cm +/- 1 c.m.
Weight in GSM ( Finished)
88 to 90 ASTM D - 3776 +/- 2%
Breaking Strength on 20cmx5 cm strip , Kgf
Warp 36 kg
IS 13934-1 +/- 5% Weft 26 kg
Tear strength ( KMI tear tester
Warp 3136gms Pendulum test
method
+/- 2%
Weft 2624gms +/- 2%
Width of ready boarder
7 cm Viscose Jacquard 120/44Bright Viscose
+/-2 mm
Length 5.50 mtrs. +/-2 cm
Print As per design 0%
Page 7.2 of 3
Fabric specification
14
Fabric pack: 7
Fabric should confirm following quality standards:
Tests Test Method
Acceptable standard
Colour fastness
Fastness to sun light AATCC-16 5
Washing @ 490 C
(Color Change) AATCC-61-2003 5
Crocking AATCC-8 5
Heat press AATCC-133 5
Perspiration AATCC-15-2002 5
Dimensional stability (After 3 cycles)
AATCC 135-2003 2%
Bow/ skew ASTM D 3882 2%
Abrasion, 10000 cycles ASTM D 4966
Shade change
5
Pilling 5
Washing shrinkage % Length
IS 6330:1A 2% (Max)
Width 1%
Note: Banned dyes / chemicals not to be used Value for test results: 5: Negligible 4: Slight 3: Noticeable 2: Considerable 1: Sever
Page 7.3 of 3
15
Fabric pack: 8
Garment type: Blouse
Category of staff : Female Length of fabric : 1.00 mtr per pack
Trim/ accessory: Nil Sketch of Design No
S. No. Name of company Color code
(Matching to sari)
1 GETCO As per Sample
Page 8.1 of 3
16
Fabric pack: 8
Standard No. Tolerance
Type PC Rubia
Content/ composition 70% polyester, 30%Cotton
AATCC-20/20A +/- 2%
Weave Plain
EPI (Finished) 100 ASTM-D-3775
+/- 5%
PPI (Finished) 80 +/- 5%
Yarn count Warp 62s PC - hi twist
IS 3442 +/- 2%
Weft 62s PC - hi twist +/- 2%
Yarn Type Warp
AATCC-20/20A
Weft
Width 35” +/- 1 c.m.
Weight in gms per sqm 55 to 60 ASTM D - 3776
Breaking Strength on 20cmx5 cm strip , Kgf
Warp 41.75 kgf
ISO-5081 +/- 5% Weft 20.25 kgf
Tear strength ( KMI tear tester
Warp 928 gms ASTM D 1424
+/- 2%
Weft 800 gms +/- 2%
Page 8.2 of 3
Fabric specification
17
Fabric pack: 8
Fabric should confirm following quality standards:
Tests Test Method
Acceptable standard
Colour fastness
Fastness to sun light AATCC-16 4-5
Washing AATCC-61-2003 4-5
Crocking AATCC-8 4-5
Heat press AATCC-133 4-5
Perspiration AATCC-15-2002 4-5
Dimensional stability (After 3 cycles)
AATCC 135-2003 2%
Bow/ skew ASTM D 3882 2%
Abrasion, 10000 cycles ASTM D 4966
Shade change
4
Pilling 4
Washing shrinkage % Length
ISO 63301A 2% (Max)
Width 1%
Note: Banned dyes / chemicals not to be used Value for test results: 5: Negligible 4: Slight 3: Noticeable 2: Considerable 1: Sever
Page 8.3 of 3
18
ANNEXURE 1
List of Fabric Defects Nature Defects
Yarn Defects Broken Filaments, Color flecks , Slubs, Knots
Weaving Defects
Broken Ends, Broken Ends Woven in a Bunch, Broken Pattern, Double End, Float, Gout, Hole-Cut or Tear, Lashing-in, Local Distortion, Missing Ends, Oil or other Stain, Oily or Soiled Ends, Oily Weft, Reed Marks, Selvedge Defect, Slough Off, Smash, Snarls, Stitches, Untrimmed Loose threads, Weft Bar, Weft Crack.
Processing Defects
Bleaching spot, Blurred or Dark Patch, Defects caused by Hanging Thread, Dye Bar, Dyestuff Stain Misprint/Absence of Print, Patchy or Streaky or Uneven Dyeing, Pilling, Shading or Listing, Uneven Printing or Tinting, Water Mark, White Spot.
Embroidery Defects Wrong Placement, Tilting of Embroidery, Broken threads, Incomplete embroidery, Shade Variation.
Visual Defect Any visual defect that may affect, salability, serviceability, appearance of the fabric in a way that is significantly unacceptable for sale.
19
ANNEXURE 2 Specifications for packing:
1. Pack should contain one pc. Of fabric length, sketch of design, trim etc. as mentioned in fabric Pack No.: 1 to 8
2. Ready Pack size 12” x10” ( +/- ½”) 3. Material: Self adhesive poly bag, gauge: 200 4. Necessary warning should be printed in front side of bag to keep it away from
the reach of children.
Pack No: 16 font
Fabric code: 14 font Colour code: 14 font Lot no: 12 font Sort No.: 12 font
Sticker
This side up
10”
12”
Warning
This bag is not a toy. Keep it away from the
reach of children
Hole