Upload
daniel-lm
View
29
Download
3
Embed Size (px)
DESCRIPTION
Instruções montagem da Falcon
Citation preview
25/4/2015 Falcon How to make
http://www7a.biglobe.ne.jp/~sf-papercraft/sf/Falcon/How%20to%20make/HTM.html 1/2
ミレニアムファルコン 組立説明
Millennium Falcon How to make
Japanese English
左からスプレーのり(高額です
が普通紙を厚紙に貼り合わ
せるときに重宝します。画材
屋で売ってます)、木工用ボ
ンド(必需品です。百均でも購入可能)、カッター、書けなく
なったボールペン(折り目を付けるのに必要)、ピンセット、
1~3ミリのプラ棒(銃身等丸
めるのに必要)。
1
基礎パーツMF-1を2枚プリン
トし、MF-5~8を貼ったのち
穴を開けます。
周囲の糊しろをプリント側に
折り曲げておきます。
このパーツはかなり厚めの紙をお勧めします。もしくは2枚
貼り合わせてもよいでしょう。
Two MF-1 are printed.
MF-5MF-6, MF-7, and MF-8 are stuckon MF-1.
MF-5,MF-6, MF-7, and MF-8 are stuckon MF-1 of two sheets.
A hole is made in four places. (I recommend you to use thicker paper for
this part. Or please stick two sheets ofpapers and make it strong.)
2
サイドパーツMF-2、MF-3、
MF-4を裏側から貼り付けま
す。補強パーツR-2を写真のよう
に4つ貼り付けます。
MF-2 MF-3 of a side part and MF-4 are
attached from a reverse-side side.Four reinforcement parts R-2 are attachedlike a photograph.
3
A、B、C、Dを裏側から取り
付けます。
A、Bは上面用、C、Dは下面用です。
A, B, C, and D are attached from a
reverse-side side.
A and B are the parts for tops. And C andD are the parts for the bottoms.
4
補強パーツR-1とR-3を図のよ
うに両面に取り付けます。R-1 which is reinforcement parts, and R-3are attached in both sides as shown in a
figure.
25/4/2015 Falcon How to make
http://www7a.biglobe.ne.jp/~sf-papercraft/sf/Falcon/How%20to%20make/HTM.html 2/2
5
MF-22の4箇所の穴を開け、
E、G、F を裏側から取り付けます。
X、Yを取り付けます。
Four holes are made in MF-22 and E, G,
and F are attached from a reverse-sideside. Parts X and Y are attached in MF-
21.
6
MF-22を本体に貼り付けま
す。
MF-22 are stuck on a main part.
7
MF-9、MF-13、MF-20、
MF-21を取り付けます。
MF-9, MF-13, MF-20, and MF-21 are
attached.
次のページへ To the following page.