Category Result BreakDown

Course VFS0164 15 Correct out of 15 Question

  Module 1 15 Correct out of 15 Question

      Objective 1 2 Correct out of 2 Question

      Objective 2 2 Correct out of 2 Question

      Objective 3 8 Correct out of 8 Question

      Objective 4 1 Correct out of 1 Question

      Objective 5 2 Correct out of 2 Question

Test Results Detail

1  It is important to always be aware of your surroundings while at a job site.

False

True

2  Falls from lower than 7 feet do not usually cause injuries?

True

False

3  A pre-planning strategy significantly increases the number of fall hazards.

True

False

4  Many workers fall each year from improper usage of _____.

a job hazard analysis

monitoring systems

toeboards

ladders

5  When working on a vertical surface, such as an electricity pole, a(n) _____ system is often used.

administrative

deceleration device

engineering

positioning device

6  Straps, slings, and beam trolleys are types of _____.

safety nets

toeboards

warning lines

anchorage connectors

7  Are workers allowed in the area between a warning line and unprotected edge?

Yes

No

8  The impact of a fall can be reduced by using _____ to limit the energy involved.

passive systems

Category Result BreakDown

safety nets

deceleration devices

9  Passive protection systems are often preferred over active systems.

False

True

10 Which system stops falls in progress?

Passive

Active

11 Do you have to wear special equipment with passive systems?

Yes

No

12 The impact of a fall is distributed over the body with the use of a _____.

anchorage

connector

safety net

harness

13 How do canopies help keep workers safe?

They keep people away from areas where the potential of falling objects exists.

Vertical barriers at the edge of the walking level block objects from falling down.

Horizontal barriers across hole openings catch falling objects from above.

14 Fall protection equipment should be stored in an area that is clean, dry, and moisture free.

False

True

15 When cleaning PFAS equipment, use only _____.

soft cloths

solvents

soapy water