Fall Protection/Climbing Gear

Fall Protection/C

limbing G

ear

Buckingham Harness Matrix6 ___ ___ ___ ___ ___ ___

6 (Required first digit)

Chest Strap Attachment Harness Type Leg Strap

AttachmentFall Arrest

AttachmentBody Belt

AttachmentShoulder

Pads

0 = Used only with harness type 3

3 = Cross-over design with perm. attach. chest strap

located 3-3/4” above front ‘X’. (Applicable only to chest strap

attachment “0”

7 = Friction buckles on vertical shoulder straps (chest mount)

1 = Step-in leg straps, no buckles

5 = Permanently attached

0 = None 0= None

3 = Velcro Chest Strap3A = #3 with black

powder coated shoul-der strap buckle

7A = Friction buckles on vertical shoulder straps (low mount)

3 = Interlocking Buckle

5Q = Shock Ab-sorber permanently

attached (not returnable)

1 = Outside mount 1” plastic buckle 1 = Permanent

4 = Interlocking Buckle3B = #3 with loop

at cross on front of harness

7G = 7A w/spring-loaded friction buckle

3A = Interlock-ing Buckle (black powder coated)

6 = Dee Ring4 = Body belt

attached through means of loops at-tached to harness

2 = Replaceable

4B = Interlocking buckle black powder coated

3D = #3 w/o chest strap, with 1-3/4”

nylon attach piece stitched across back

shoulder straps directly below the

chafe

8 = Basic Harness - no shoulder strap

adjustment4 = Grommets

6D = DiElec Dee ring

4Q = Body belt permanently attached (not returnable)

3 = Replaceable with 1” 4-ply nylon loop for snaphook and velcro loop to hold lanyard on shoulder (6JLV)

8D = 8C** w/black belt chafes for vertical

adjustment.

3E = #3D with loop at cross on front of

harness

9 = Basic Harness with shoulder strap

adjustment8C = Quick Con-

nect Buckle7 = Web Loop 4 = Light Weight

Permanent

3S = #3B w/Quick Connect Buckles

9A = Basic Harness #9 with black powder

coated shoulder strap hardware

9 = Small Shoulder Dee Ring

5 = Light Weight Replaceable

124

Constructing the harness design to fit your needs is easy with Buckingham’s Harness Matrix. Simply begin by using the prefix ‘6’ and then use each category listed above to fill in the rest of the catalog numbers according to your own preferences. Example: 6-4-3B-8-7-5D-3. Use the second row of the matrix to write in the combination of your choosing.

(800)844-3057 www.redbudsupply.netFa

ll P

rote

ctio

n/C

limbi

ng G

ear

Buckfit FR Harnesses637G8C500CK1 637G8C700K1

• ‘H’ Style Full Body Harness.• Velcro® chest strap meets ANSI Z359.1 requirements.• 18” dorsal pigtail with small dee ring termination for

attaching a 4-1/2’ shock absorbing lanyard.• Spring loaded friction buckles for height adjustment.

• ‘H’ Style Full Body Harness.• Velcro® chest strap meets ANSI Z359.1 requirements.• A reinforced web loop dorsal attachment used to half-

hitch shock absorbing lanyard.• Spring loaded friction buckles for height adjustment.

603S8C700K1 68D7G8C600K1

• ‘X’ Style Full Body Harness.• Reinforced web loop dorsal attachment used to half

hitch a shock absorbing lanyard.• A reinforced web loop at the sternum.

• ‘H’ Style Full Body Harness.• Steel dee dorsal attachment. • Spring loaded friction buckles for height adjustment.• Quick Connect Buckle chest and leg straps with leather chafes.

Buckingham Premier Tower Harness‘H’ Style full body harness with built-in body belt featuring:

• Dri-lex® shell that fits like a vest and wicks moisture away from the user.• Dri-lex® shoulder and leg pads to add to overall comfort.• Buckingham’s patent-pending Quick Connect Buckles on the chest and leg straps.• Steel Dee dorsal attachment.• Spring loaded friction buckles for height adjustment.• Frontal chest Dee ring adjusts up and down independently of the shoulder straps, allowing the

user to correctly position when using a ladder climb system. • PVC shoulder loops to stow lanyard hardware when not in use.• Made from Type 13 nylon webbing with silver upper and black lower sections.

Body belt features include:• Specially designed work positioning Dee rings to ease the attachment of positioning strap by

restricted Dee ring swing.• Leather tool loops and an accessory snap and ring for tool storage. • A grommet tongue buckle to fasten the waist belt, and a 5” wide belt with thick padding and built-

in stiffener for maximum comfort.The modular suspension system (removable, if desired) includes:

• A rigid batten seat with padding for maximum comfort (batten can be removed for those preferring a soft seat).

• Elastic retainers with snap fasteners on seat section to stow suspension Dee rings out of the way when climbing.

• Meets all applicable ANSI, OSHA, and ASTM standards.• Order by adding size suffix S, M, L, X to part number; non-standard sizes available upon

request.

Model 61995

125

(800)844-3057 www.redbudsupply.netFall P

rotection/Clim

bing Gear

DBI/SALA ExoFit Tower Climbing HarnessesCatalog No. Descritption

1108650 ExoFit Tower Climbing Harness, Size: Small

1108651 ExoFit Tower Climbing Harness, Size: Medium

1108652 ExoFit Tower Climbing Harness, Size: Large

1108653 ExoFit Tower Climbing Harness, Size: X-Large

1108650

DBI/SALA Vest Style Full Body Harnesses*Catalog No. Descritption

1102000 Features tongue buckle leg straps, back D-ring, parachute buckles on lower shoulder straps

1101254Features tongue buckle leg straps, back D-ring, shoulder

retrieval D-ring, parachute buckles on lower shoulder straps

1102008 Features tongue buckle leg straps, back and side D-rings, parachute buckles on lower shoulder straps

1103321 Features pass-thru buckle leg straps, back D-ring

1104725 Features non-conductive/non-sparking PVC coated hard-ware, pass-thru buckle leg straps, back D-ring, belt loops

1102001 Features parachute buckle leg straps, back D-ring

1102009 Features parachute buckle leg straps, back and side D-rings

1102000

DBI/SALA Dorsal Web Loop Full Body HarnessCatalog No. Description

1104730 Dorsal Web Loop Harness, Dorsal loop replaces back D-ring

1104730

DBI/SALA Dorsal Web Loop Full Body HarnessCatalog No. Description

1104730 Dorsal Web Loop Harness, Dorsal loop replaces back D-ring

1104730

126


ll P

rote

ctio

n/C

limbi

ng G

ear

Buckingham Rope and Web Lanyard Matrix7 ___ ___ ___ ___ ___ ______ ___ ______ ___ ___

7 (Required First Digit)

Hardware (End #1 attached to

user)

Hardware (End #2 at-tached to anchor)

MaterialWeb/Rope

Fixed or Ad-justable

Overall Length

(Optional) Dual Lanyard

0 = 3/4” eye for carabiner

D = Steel carabi-ner Self-locking

model 5005

1 = 1” Yellow poly-ester web 1 = Fixed

D = Add cost for components Identified w/X

(+)Add cost of 2 Ladder snaps

2 = “D” ring stan-dard

4” Dia. doube thick 1” yellow

web loop

1A = 1” Red web-bing 2 = Adjustable

J = Integral standard web lanyard loop

4 = Long to Half-hitch

K = 7” nylon loop 2 = 1/2” Rope R = Rescue loop

6 = 3” Nylon Rope L = 1705 rope snap 3 = 5/8” Rope

V = Velcro sewn at anchor end

of web

+7 = 1709 Rope snap

M = permanently attached 4 = 1/2” Multiline

8 = 1704 swivel snap

P = Retrieval Dee ring 5 = 1/2” Dacron

A = Aluminum carabiner Self-locking 5005SA

R = 2 1/2” Lad-der Hook 3130

B = 3034 Ladder Snap T = Rebar hook

V = 1706 Snap

Z = 1 3/4” Lad-der hook model

3129

Use this matrix to custom-build your own rope or web lanyard. Note: Each catalog number requires the prefix ‘7’.

7VV1121706 Locking SnaphooksFixed length1” Web2’ Long

7VV1261706 Locking Snaps1” Nylon WebAdjustable Length

70V1145Sewn 3/4” eye1706 Locking Snaps1” WebFixed Length 4.5’

7VV3161706 Locking Snaps5/8” RopeFixed Length 6’

127


rotection/Clim

bing Gear

Buckingham Retractable Lanyard Matrix5008 ___ ___ ___ ___

Retractable Unit Length (Ft.)Retractable Unit Length (Ft.) Swivel Connecting De-vice-Frame End

Connecting De-vice-Lanyard End

6 0 = None 0 = None 0 = None

8 1 = 5/16 Swivel w/Bolt

A = Aluminum Cara-biner Self-Locking

5005SA

3 = Steel Carabiner Screw Closure 5005

10 2 = 5/16 Swivel w/Std. Pin

D = Steel Carabiner Self-Locking 5005

9 = Locking Ladder Snap

E = Quick LinkA = Aluminum

Carabiner Self-Locking 5005SA

F = Bracket to attach Retrieval Unit to

Body Belt

C = Aluminum Carabi-ner Screw Closure

L = 1705 Locking Snaphook

D = Steel Carabiner Self-Locking

V = 1706 Locking Snaphook

L = 1705 Locking Snaphook

+1 = Attached to 3809R R = Ladder Snap 3130

2 = Dee Ring V = 1706 Locking Snaphook

8 = 1704 Swivel Snap Z = Ladder Snap 3129

9 = 2-1/4” Ladder Hook

Use the blank second row to construct the product number of your choosing.

5008-10DR

5008-81FV

5008-801V128

REVISED


ll P

rote

ctio

n/C

limbi

ng G

ear

Matrix for Buckingham Shock Absorbing Lanyards___ ___ ___ ___ ___ ___ ___

DeceleratorHardware (End #1 attached to

user)

Hardware (End #2

attached to anchor)

Material Web/Rope

Fixed or Adjustable

Overall Length

(Optional) Dual Lanyard

5 = BUCK STOP 0 = 3/4” eye for carabiner

P = Retrieval Dee ring

1 = 1” Yellow polyester web 1 = Fixed

D = Add cost for components iden-tified w/X (+) Add cost of 2 ladder

snaps

6 = BUCK ARREST 2 = “D” ring stan-dard

R = 2 1/2” Lad-der Hook 3130

1A = 1” Red webbing 2 = Adjustable R = Rescue Loop

8 = BUCK YARD 4 = Standard half-hitch loop

T = Rebar hook w/Eye 2 = 1/2” rope 1 = Fixed

V = Velcro sewn at anchor end of

web

6 = 3” nylon rope V = 1706 Snap 3 = 5/8” rope 2 = Adjustable

+7 = 1709 Rope Snap

Z = 1 3/4” Lad-der hook model

3129

4 = 1/2” mul-tiline 1 = Fixed

8 = 1704 Swivel snap

+4 = 2 1/4” lock-ing ladder snap

30355 = 1/2” Dacron 2 = Adjustable

A = Aluminum carabiner self-

locking 5005SA

+6 = Aluminum body locking rope snap

7 = Buck stretch 1 = Fixed

B = 3034 Ladder Snap

+7 = Steel lock-ing snap hook 2 = Adjustable

D = Steel carabi-ner self-locking

model 50051 = Fixed

K = 7” nylon loop 2 = Adjustable

L = 1705 Rope Snap 1 = Fixed

M = Permanently attached 2 = Adjustable

6VV116 8+66716D+j

DBI/SALA Shockwave2 Shock Absorbing Lanyards

Catalog No. Description

1224306Expands to 6’ and contracts to 4-1/2’, abrasion-

resistant nylon tubular webbing, self-locking snaphooks at ends, impact indicator

1224409Expands to 6’ and contracts to 4-1/2’, twin-leg

100% tie-off type, self-locking snaphook at center, aluminum hooks at leg ends, impact indicator1224306

129


rotection/Clim

bing Gear

DBI/SALA Confined Space Rescue EquipmentCatalog No. Description

8101000 SALALIFT® Winch

8102001 SALALIFT® II Winch

3400115 Sealed SRL

8103000 Material Winch

8304000 Winch/SRL/Tripod Combination

6116026 SRL Ladder Mounting Anchorage System6116026 SRL Ladder Mounting Anchorage System

6116027 SRL Ladder Mounting Anchorage System6116027 SRL Ladder Mounting Anchorage System

6116038 Ladder Mast Anchorage System

6116027 Ladder Mast Anchorage System

DBI/SALA Anchorage ConnectorsCatalog No. Description

1003000 Pass-thru Tie-off Adapter

5900550 Cable Choker

2101630 Anchorage Plate 1003000

DBI/SALA Saflok® Carabiners Catalog No. Description

2000523 3/4” opening

2000106 1-3/16” opening

2000108 2” opening

2000200 Stainless steel, 11/16” opening

2004339 Aluminum, 3/4” opening

2000108

2000106

2000523

61160388103000

DBI/SALA Sealed Self Retracting LifelinesCatalog

No. Description

3403400

Features corrosion-resistant cast aluminum/stainless steel housing, self-adjusting disc brake, reserve lifeline retention system, 3/16”

galvanized steel wire rope, self-locking swivel snap hook with impact indicator.

3403402 Includes all features of the 3403400 plus a built-in retrieval winch for raising/lowering load during emergencies.

3403402

DBI/SALA Talon Web Self Retracting LifelinesCatalog No. Description

3101001 Features a 1” wide nylon webbing lifeline, quick-connector handle, self-locking swivel snap hook with impact indicator, 8’ length

3101009 Features a 1” wide nylon webbing lifeline, order picker connector, self-locking swivel snap hook with impact indicator, 8’ length

3101051Features a 1” wide nylon webbing lifeline, swiveling anchorage loop to prevent lifeline twisting, self-locking swivel snap hook with impact

indicator, 16’ length

3101001

130


ll P

rote

ctio

n/C

limbi

ng G

ear

DBI/SALA First-Man-Up™ SystemCatalog No. Description

2104519 Includes 6 to 12 ft. adjustable pole, tie-off adapter tool, hook attachment, tie-off adapter, carrying bag, training video

1201390 Scaffold Choker with D-ring

1220145 Girder Grip2104519

1201390

DBI/SALA Adjustable Width Trolley for I-BeamsCatalog No. Description

2103143Attachable at midpoint, minimum turn radius of 7”, fits 3”-8” flange width

and up to 11/16” thick flat or tapered beams, non-corrosive double-shielded wheel bearings

Buckingham Linemens’ Body BeltsCatalog No. Description

2000M Body Belt, full float, 5-1/2” foam cushioned pad reinforced - available in Black, Brown, or Burgundy

1993F Body Belt, full float, lightweight 8” leather cushioned pad

1993F 2000M

Buckingham Linemens’ Full Float Body Belts with Drilex Liner

Catalog No. Description

2010M Lightweight Full Float Body Belt with Drilex-lined cushion pad

2010MT Same as 2010M, but with tongue style buckle instead of quick connect buckle

2011MT Full Float Body Belt with tongue buckle and five grommet adjustments

2011M Same as 2011MT, but with quick connect buckle instead of tongue style buckle

2011MT 2010M

Bashlin Back Support Tool BeltsCatalog No. Upper Tongue Adj.

88G

D18 33-39”

D19 or D20 35-41”

D21 or D22 37-43”

D23 or D24 39-45”

D25 or D26 41-47”

D27 or D28 43-49”

D29 or D30 45-51”

88GHIP-GRIP131


rotection/Clim

bing Gear

Bashlin Linemen’s Tool BeltsCatalog No. Description

88 The Floridian

60FH The Bashlin Deluxe

76 The Dakota

72HR The Spartan

160NL The Journeyman

160N The Nylon Deluxe

1511N The Wrangler

71N The Nylon Spartan 88 76

60FH 72HR1511N

Bashlin Back Support Tool BeltsCatalog No. Upper Tongue Adj.

88B

D18 29-36”

D19 30-37”

D20 31-38”

D21 32-39”

D22 33-40”

D23 34-41”

D24 35-42”

D25 36-43”

D26 37-44”

D27 38-45”

D28 39-46”

D29 40-47”

D30 41-48”

88BREST-A-BACK

Bashlin Supporter BeltsCatalog No. Description

83 Detachable Rest-A-Back

83N Nylon Detachable Rest-A-Back

83F Husky

83B Back-A-Line

81 Supporter Strap

81-1 Leather Drop Strap Only

80 Sam Brown Suspenders

83B 80 132


ll P

rote

ctio

n/C

limbi

ng G

ear

Buckingham Titanium Bucklite Pole ClimbersStraps

Shank Gaff Angle Leg Shank Gaff Angle Leg Shank Gaff Angle Leg Foot

Cat. No. Offset Straight 12 16Cat. No. Offset Straight 12 16Cat. No. Offset Straight 12 16Cat. No. Offset Straight 12 16Cat. No. Offset Straight 12 16 2239 Nylon

2234Leather

21391Nylon

21341Leather Pads

TB9209 X XX XTB9209A X XTB9208 X XX X XTB9208A X X XTB9205 X XX X X X 3122

TB92089T X XX X XTB9409 XTB9409 X XTB9409A XTB9409A X XTB9408 XTB9408 X X XTB94089A XTB94089A X X XTB94059 XTB94059 X X X X 3122

TB94059A XTB94059A X X XX X X 3122

Buckingham Permanent Gaff Pole ClimbersCat. No. Foot Strap plus Leg Strap plus PadCat. No. Foot Strap plus Leg Strap plus PadCat. No. Foot Strap plus Leg Strap plus PadCat. No. Foot Strap plus Leg Strap plus PadCat. No. Foot Strap plus Leg Strap plus PadCat. No. Foot Strap plus Leg Strap plus Pad9747 -- -- --

9847 Leather 21341 -- --

98479 Nylon 21391 -- --

8747 Leather 21341 Leather 2234 3122

87479 Nylon 21391 Nylon 2239 3122

87470 Leather 21341 Not Required 3500

874790 Nylon 21391 Not Required 3500

Buckingham Permanent Gaff Pole Climbers - Offset StirrupCat. No. Foot Strap plus Leg Strap plus PadCat. No. Foot Strap plus Leg Strap plus PadCat. No. Foot Strap plus Leg Strap plus PadCat. No. Foot Strap plus Leg Strap plus PadCat. No. Foot Strap plus Leg Strap plus PadCat. No. Foot Strap plus Leg Strap plus Pad9409 -- -- --

9408 Leather 21341 -- --

94089 Nylon 21391 -- --

9405 Leather 21341 Leather 2234 3122

94059 Nylon 21391 Nylon 2239 3122

94050 Leather 21341 Not Required 3500

940590 Nylon 21391 Not Required 3500

133


rotection/Clim

bing Gear

Buckingham Replaceable Gaff Pole and Tree Climbers*

Cat

alog

No.

Adj

ust L

engt

h

Shank Straps

Pads Stirrup Style

Stirrup Width Gaffs

Offs

et

Stra

ight

Leather NylonLeather Nylon

Leg

2234

Foot

21

341

Leg

2239

Foot

21

391

3503

2

3122

Loop

Rin

gs

Std.

Nar

row

Tree

Pole

9409 X XX X X XX X X9408 X XX X X X XX X X

94089 X XX X X X XX X X9209 X X X XX X X9208 X X X X XX X X

92089 X X X X XX X X9609 X XX X X X X9608 X XX X X X X X

96089 X XX X X X X X9205** X X X XX X XX X X X X XX X X

92059** X X X XX X X X XX X X9405** X XX X X XX X X X XX X X

94059** X XX X X XX X X X XX X X96059** X XX X X XX X X X X X9305** X X X XX X XX X X X X XX X X

93059** X X X XX X X X XX X X9505** X XX X X XX X X X XX X X

95059** X XX X X XX X X X XX X X97059** X XX X X XX X X X X XX X

9509 X XX X X XX X X9508 X XX X X X XX X X

95089 X XX X X X XX X X9309 X X X XX X X9308 X X X X XX X X

93089 X X X X XX X X9709 X XX X X X XX X9708 X XX X X X X XX X

97089 X XX X X X X XX X

* Add “T” to catalog number for Twisted Shank** Complete Sets 134


ll P

rote

ctio

n/C

limbi

ng G

ear

Bashlin Pole Climbers - BD16B Series - Steel AlloyCatalog No. Description

BD16B-1N Bottom straps attached

BD16B-2N Bottom straps attached, and top straps

BD16B-3N Bottom straps attached, top straps and #110D pads

BD16B-4N Bottom straps attached, top straps and #130D pads

BD16B-5N Bottom straps attached, top straps and #140DS pads

Bashlin Pole Climbers - BD14 Series - Aluminum AlloyCatalog No. Description

BD14-1N Bottom straps attached

BD14-2N Bottom straps attached, and top straps

BD14-3N Bottom straps attached, top straps and #110D pads


BD14-5N Bottom straps attached, top straps and #140DS pads

Bashlin Pole Climbers - BD16BC Series - Steel ClimberCatalog No. DescriptionBD16BC-1N Bottom straps attached

BD16BC-2N Bottom straps attached, and top straps

BD16BC-3N Bottom straps attached, top straps and #110D pads

BD16BC-4N Bottom straps attached, top straps and #130D pads

BD16BC-5N Bottom straps attached, top straps and #140DS pads

14P - Polished Replacement Gaff

135


rotection/Clim

bing Gear

Bashlin Pole Climbers - BD12 Series - Steel Climber, Non-Replaceable GaffCatalog No. Description

BD12-1N Bottom straps attached

BD12-2N Bottom straps attached, and top straps



BD12-5N Bottom straps attached, top straps and #140DS pads

Bashlin Pole Climbers - BD12C Series - Non-Replaceable Gaff, Twisted ShankCatalog No. Description

BD12C-1N Bottom straps attached

BD12C-2N Bottom straps attached, and top straps

BD12C-3N Bottom straps attached, top straps and #110D pads

BD12C-4N Bottom straps attached, top straps and #130D pads

BD12C-5N Bottom straps attached, top straps and #140DS pads

Bashlin Pole Climbers - BD12L Series - Fixed Gaff, Narrow StirrupCatalog No. Description

BD12L-1N Bottom straps attached

BD12L-2N Bottom straps attached, and top straps

BD12L-3N Bottom straps attached, top straps and #110D pads

BD12L-4N Bottom straps attached, top straps and #130D pads

BD12L-5N Bottom straps attached, top straps and #140DS pads 136


ll P

rote

ctio

n/C

limbi

ng G

ear

Bashlin Climber Pads - 145 Series - Double Strap DesignCatalog No. Description

145AC For Bashlin steel BD12-BD16 Climbers

145BC For Bashlin aluminum BD14 Climbers

145 Climber Pads with no steel insert

145BC

Bashlin Climber Pads - 105 Series - Original “Spur-Stay” Climber Pad

Straight Use on Angled Use on

105A BD12BD16 105AC BD12

BD16

105B BD14 105BC BD14

105K Klein 105KC Klein

105A

105BC

Bashlin Climber Pads - 140DS Series - Wing PadCatalog No. Description

140D Not padded

140DS Padded

Bashlin Climber Pads - 130D Series - L-Shaped PadCatalog No. Description

130D Padded

140DS

130D

Bashlin Climber Pads - 150TS Series - T-Shaped PadCatalog No. Description

150T Not padded

150TS Padded

Bashlin Climber Pads - 140DS Series - Basic 2-plyCatalog No. Description

110D Not padded

110DS Padded

150TS

110D

137

(800)844-3057 www.redbudsupply.net(800)844-3057 www.redbudsupply.netFall P

rotection/Clim

bing Gear

Replacement Parts for Bashlin Climbers

Parts Description BD14Series No.

BD12*BD16B

Series No.A. Adj. Top Slide 15”-18” 14TS 16TS

B. Adj. Top Slide 18”-21” 14ATS 16ATS

C. Top Slide Screws 4T 4T

D. Gaff Screws 4G 4G

E. Split Ring 3 3

F. Gaffs 1-5/8” 14 14

G. Polished Gaffs 1-5/8” 14P 14P

H. Tree Gaffs 2-1/2” 14T 14T

B

AC

E

D

FH

G

Bashlin Climber AccessoriesCatalog No. Description

2 Gaff Guard

5VV Gaff Guage

27 Gaff Shaping Kit

27-1 Case for Gaff Shaping Kit

27-2 Sharpening Stone

27-3 Mill file, 6”

27-5 Wood File Handle

* BD12 Series features non-replaceable gaffs.

25

27

Buckingham Safety ProductsCatalog No. Description

574 Staple Stick (holds 12 staples)

6909U Universal Gaf6909U Universal Gaff Guard, wire coated6909U Universal Gaff Guard, wire coated6909U Universal Gaf

6909U574

Bashlin Climbing Equipment Maintenance Accessories

Catalog No. Description804 Saddle Soap

806-8 Neatsfoot Oil

806-16 Neatsfoot Oil

806-32 Neatsfoot Oil

809 Mink Oil

806-32

806-8804

809

138


ll P

rote

ctio

n/C

limbi

ng G

ear

Bashlin Pole Straps - 50 SeriesCatalog No. Description

51N-2HL Pole Strap, 5’6”

52N-2HL Pole Strap, 6’

53N-2HL Pole Strap, 6’6”

54N-2HL Pole Strap, 7’

50 Series50 Series

Bashlin Pole Straps - 40NW SeriesCatalog No. Description

41NW-2HL Pole Strap, 5’6”

42NW-2HL Pole Strap, 6’

43NW-2HL Pole Strap, 6’6”

44NW-2HL Pole Strap, 7’40NW

Bashlin Pole Straps - 78 SeriesCatalog No. Description

78X-2HL Pole Strap, 5’6”

78A-2HL Pole Strap, 6’

78B-2HL Pole Strap, 6’6”

78C-2HL Pole Strap, 7’78A-2HL78A-2HL

Bashlin Extension Straps Catalog No. Description

47N-15 Extension Strap, 15”

47N-18 Extension Strap, 18”47N-15

Elk River Pole Choker Wood Pole Climbing Fall Arrest System

Catalog No. Description03714 Pole Choker 3, 4.5’ Length

03715 Pole Choker 3, 5’ Length



03704 Pole Choker 4, 4.5’ Length




483D

BuckSqueeze Wood Pole Fall Protection SystemCatalog No. Description

483D For distribution poles with up to a 50” circumference

484T For transmission poles with up to a 90” circumference484T For transmission poles with up to a 90” circumference

139


rotection/Clim

bing Gear

5204

The Buck Trainer

The Buck Trainer is a reliable apprentice fall protection 5,000 lb. anchor that rotates 250 degrees. This unit is ideal to transport to remote areas to field test potential apprentices before sending them to the actual training facility.

Parts included:• Ratchet Strap to lift Buck Trainer with handline • Bolts and nuts• Mounting brackets• Carabiner to mount lifeline

694

Rescue Buck

Rescue Buck is ideal for pole top rescue training, retrieval training and fall protection testing. You can fill fall protection testing. You can fill fall protection testing. YRescue Buck with recycled tires to the desired weight.

Height: 5’ 6”

140

Documents

Fall Protection/Climbing Gear