-
HGT001HGT INNOVATIONS - FANTOM STOP> Flush Mounted
> Magnetically Activated Pin
> Door Stop Solution
-
INNOVATIVE AND MODERN
> Flush mounted
> Rare earth magnet induced hold-open device
> Flush mounted mechanical door stop
> No trip hazard
> Stream-line modern finish
> Suitable for single and double leaf doors
> Suitable for various fixing positions
> Quick and easy installation
The HGT Innovations Fantom Doorstop System provides a high
quality innovative solution for all project application
requirements.
The flush mounted pin alleviates trip hazards whilst maintaining
a modern desirable finish. The concealed rare earth magnet
technology ensures exceptional mechanical functionality.
-
FEATURES
FOR THE INSTALLER
> Suitable for various fi xing positions
> Installation achievable in a wide range of door thicknesses
(no less than 35mm)
> Installation achievable in various floor thicknesses and fi
nishes
> Simple, fast installation. No product specifi c tools
required.
> Best installed pre-door installation
FOR THE SPECIFIER/ARCHITECT
> High quality design ensures an ideal solution for all
project applications
> Innovative design creates a streamline appearance and
removes all tripping hazards
> Available in a wide range of colours and designs
> Creates door stop and hold open device solution in one cost
effective product
FOR THE USER
> Removes tripping hazard posed by conventional door stop
products
> Easy to clean around
> Creates door stop and hold open device solution in one cost
effective product
> No maintenance required
> Sleek streamline look
-
SOFT/MEDIUM CONTROLLED OPENING STRENGTH, HOLD OPEN IS
ACTIVATED.
(FIGURE A + B)
When the door is opened in a controlled fashion, the unique
striker plate design will hold the pin in an activated position and
keep the door in a firm hold opened position.
From this hold open position, the door can be easily closed with
minimal effort.
> A > B > C
HARD/ FAST UNCONTROLLED OPENING STRENGTH, FANTOM WORKS AS DOOR
STOP ONLY.
(FIGURE C)
When the door is opened in a fast, uncontrolled fashion, the
Fantom Stop works only as a door stop.
Hold open device will not activate. The pin will engage the back
stop angle on the striker plate, preventing the door from passing
over the Fantom Stop.
FUNCTIONALITY
-
Ø10mm
Ø28mm
Ø13.8mm
6.5mm
Ø24mm
SPECIFICATIONS
-
HGT INNOVATIONS - FANTOM STOP> www.fantomstop.com.au
> [email protected]
