WWW.FARMIFOREST.FI

WWW.FARMIFOREST.FI

FARMI CH 100 FProfitable choice - since 1962

● Good chipping and feeding with sharp knives ● Robust and simple construction ● Easy maintenance

WWW.FARMIFOREST.FI

WWW.FARMIFOREST.FI

FARMI CH 100 F is designed as a robust and inexpensive disc chipper for landscaping to chip branches and small trees up to a diameter of 100 mm. The FARMI CH 100 F can be mounted onto a small tractor giving a compact chipping machine in gardens, parks, yards and road sides. Two knives and an anvil take care of chipping and feeding. CH 100 F chipper is available as a tractor PTO versions or as a hydraulic driven option.

* Output and power demand of the chipper may vary depending on the ma-terial to be cut, the status of the knives, the chip length, the kind of feeding and speed. Sharpening the knives improve pulling in branches and chipping.

Kind of feeding ManualApplication LandscapingOutput* 0,5-2 m3/hThickness of chip 12 mmMax. diameter 100 mmRecommended tractor power 7,5-30 kWSpeed 540-1000 rpmKnives 2 pcs.Chipper weight 193 kg / 210 kgRotor diameter 550 mmRotor weight 46 kgAttachment to the tractor 3-point hitchDischarge Pipe positions 2 (both sides)

Hydraulic Driven Option: Hydraulic Motor 50ccRequired pump capacity: 38-60 l/min, 180 bar