factory applied coating

Sin

gle

Sys

tem

Eng

inee

ring

Sol

utio

n To

Las

t

FASTFactory Applied STOPAQ Technology

Fact

ory

App

lied

STO

PAQ

Tec

hnol

ogy

STOPAQ developed an excellent longstanding single system engineering solution for pipelines whereby the problem of the joint as weakest link is not an issue anymore. Finally a system where the joint coating is as good as the mainline coating.In alliance with pipecoaters such as Ehri, STOPAQ licences pipecoaters to make use of the STOPAQ systems meeting the operator criteria such as temperature, soil movement, colour and gloss retention and/or chemical resistance regardless of Cathodic Protection.

factory applied coating

A weak spot?

Weld

Mastic

A weak spot?

PE cutback

3LPE pipe

Heat Shrink Sleeve

The Power of Our Single System

• Single system engineering

• Can be combined with GRE, Extruded PE/PP,

Polyester or Liquid spray coating

• Saves time and money during factory coating

• Not dependent on blasting profiles, temperatures

or primers

• Excellent adhesion of the mechanical protection

layers

• Superior anti-corrosion properties for AC or DC

current environments

• No cathodic disbondment possible

What are the benefits for you?

The coating system can be

tailor-made for STOPAQ +

Mechanical protection type

including equipment for each

project and easily applied where

ever the projects takes you.

It can be applied in existing

shops, but also by (as a) mobile

‘drive-thru concept’ container for

the application. Even on board

of offshore lay-barge vessels,

STOPAQ can provide special

surface preparation units and

application equipment for the

STOPAQ systems meeting your

requirements. No matter whether

the pipe is spirally or longitudinal

seam welded, STOPAQ FAST

systems prevent air enclosures,

mic or hic problems and cathodic

disbondment.

Back to the basics:Functions of coating …

First line of defense

100% mechanical resistance

REGARDLESS OF CP

100% corrosionprevention

Advantages of STOPAQ FAST System …

First line of defense

High mechanical protection

• GRE (glass reinforced epoxy)

• Extruded PE or PP

• Polyurea (plural-component)

• Polyester (uv-curing)

• Tape (wrapping)• Shrinktape

(infrared)

Fully Compatible FJC system

• Full set of Intrinsic corrosion prevention properties

• Simple surface preparation to ST3

• Easy and fast to apply

• Cold Application without primers

• Non-toxic material

• Non-curing

Overview STOPAQ Basecoat + GRE (Glass Reinforced Epoxy)

APPLICATION

• Wide range of applications

• Moving pipelines • Riser sections • HDD small

diameter• Easy to apply • Linepipe coating • Field Joint Coating• Fast curing GRE • Short cycle times• Efficient, no heating

required • Energy savings• Single system

engineering

PERFORMANCE

• Durable• No maintenance• Self-healing

when damaged• High impact

resistance

The system related to clients investment

No handling damages

Coating in shop or on the job

Line pipe coating & Field Joint Coating are one

One system wide range of applications

Overview STOPAQ Basecoat + GRE (Glass Reinforced Epoxy)

PRICE

• Cost effective• Maximise ROI

The system related to clients investment

Easy Control Management

Maintenance free > 30 years

Durability

LOW COST/YR/M2

1

Preheat Bast Clean Grind SurfaceDefects

SurfaceInspection

ExtrudedPolyethylene

Extruded orSpray Applied Copolymer

FBEApplications

InductionHeat

Final SurfaceTreatment

Quench StockpileElectricalInspection

Preheat Bast Clean Grind SurfaceDefects

SurfaceInspection

ExtrudedPolyethylene

Extruded orSpray Applied Copolymer

FBEApplications

InductionHeat

Final SurfaceTreatment

Quench StockpileElectricalInspection

Preheat Bast Clean Grind SurfaceDefects

SurfaceInspection

ExtrudedPolyethylene

Extruded orSpray Applied Copolymer

FBEApplications

InductionHeat

Final SurfaceTreatment

Quench StockpileElectricalInspection

Preheat Bast Clean Grind SurfaceDefects

SurfaceInspection

ExtrudedPolyethylene

Extruded orSpray Applied Copolymer

FBEApplications

InductionHeat

Final SurfaceTreatment

Quench StockpileElectricalInspection

Preheat Bast Clean Grind SurfaceDefects

SurfaceInspection

ExtrudedPolyethylene

Extruded orSpray Applied Copolymer

FBEApplications

InductionHeat

Final SurfaceTreatment

Quench StockpileElectricalInspection

Preheat Bast Clean Grind SurfaceDefects

SurfaceInspection

ExtrudedPolyethylene

Extruded orSpray Applied Copolymer

FBEApplications

InductionHeat

Final SurfaceTreatment

Quench StockpileElectricalInspection

Process 3 LPE

GREApplication

STOPAQApplication

Preheat Bast Clean Grind SurfaceDefects

SurfaceInspection

FBEApplications

InductionHeat

Final SurfaceTreatment

Quench ElectricalInspection

Stockpile

ProcessSTOPAQ - GRE

GREApplication

STOPAQApplication

Preheat Bast Clean Grind SurfaceDefects

SurfaceInspection

FBEApplications

InductionHeat

Final SurfaceTreatment

Quench ElectricalInspection

Stockpile

GREApplication

STOPAQApplication

Preheat Bast Clean Grind SurfaceDefects

SurfaceInspection

FBEApplications

InductionHeat

Final SurfaceTreatment

Quench ElectricalInspection

Stockpile

GREApplication

STOPAQApplication

Preheat Bast Clean Grind SurfaceDefects

SurfaceInspection

FBEApplications

InductionHeat

Final SurfaceTreatment

Quench ElectricalInspection

Stockpile

GREApplication

STOPAQApplication

Preheat Bast Clean Grind SurfaceDefects

SurfaceInspection

FBEApplications

InductionHeat

Final SurfaceTreatment

Quench ElectricalInspection

Stockpile

GREApplication

STOPAQApplication

Preheat Bast Clean Grind SurfaceDefects

SurfaceInspection

FBEApplications

InductionHeat

Final SurfaceTreatment

Quench ElectricalInspection

Stockpile

GREApplication

STOPAQApplication

Preheat Bast Clean Grind SurfaceDefects

SurfaceInspection

FBEApplications

InductionHeat

Final SurfaceTreatment

Quench ElectricalInspection

Stockpile

GREApplication

STOPAQApplication

Preheat Bast Clean Grind SurfaceDefects

SurfaceInspection

FBEApplications

InductionHeat

Final SurfaceTreatment

Quench ElectricalInspection

Stockpile

GREApplication

STOPAQApplication

Preheat Bast Clean Grind SurfaceDefects

SurfaceInspection

FBEApplications

InductionHeat

Final SurfaceTreatment

Quench ElectricalInspection

Stockpile

GREApplication

STOPAQApplication

Preheat Bast Clean Grind SurfaceDefects

SurfaceInspection

FBEApplications

InductionHeat

Final SurfaceTreatment

Quench ElectricalInspection

Stockpile

Preheat Bast Clean Grind SurfaceDefects

SurfaceInspection

ExtrudedPolyethylene

Extruded orSpray Applied Copolymer

FBEApplications

InductionHeat

Final SurfaceTreatment

Quench StockpileElectricalInspection

Preheat Bast Clean Grind SurfaceDefects

SurfaceInspection

ExtrudedPolyethylene

Extruded orSpray Applied Copolymer

FBEApplications

InductionHeat

Final SurfaceTreatment

Quench StockpileElectricalInspection

Preheat Bast Clean Grind SurfaceDefects

SurfaceInspection

ExtrudedPolyethylene

Extruded orSpray Applied Copolymer

FBEApplications

InductionHeat

Final SurfaceTreatment

Quench StockpileElectricalInspection

GREApplication

STOPAQApplication

Preheat Bast Clean Grind SurfaceDefects

SurfaceInspection

FBEApplications

InductionHeat

Final SurfaceTreatment

Quench ElectricalInspection

Stockpile

GREApplication

STOPAQApplication

Preheat Bast Clean Grind SurfaceDefects

SurfaceInspection

FBEApplications

InductionHeat

Final SurfaceTreatment

Quench ElectricalInspection

Stockpile

GREApplication

STOPAQApplication

Preheat Bast Clean Grind SurfaceDefects

SurfaceInspection

FBEApplications

InductionHeat

Final SurfaceTreatment

Quench ElectricalInspection

Stockpile

GREApplication

STOPAQApplication

Preheat Bast Clean Grind SurfaceDefects

SurfaceInspection

FBEApplications

InductionHeat

Final SurfaceTreatment

Quench ElectricalInspection

Stockpile

GREApplication

STOPAQApplication

Preheat Bast Clean Grind SurfaceDefects

SurfaceInspection

FBEApplications

InductionHeat

Final SurfaceTreatment

Quench ElectricalInspection

Stockpile

ProcessSTOPAQ - GRE

Brushing ST 2-3

2 3

STOPAQ basecoat

GRE Application

Holiday detecton

STOPAQ FAST

The oil, gas & water industry requires advanced

corrosion prevention and insulation systems.

Corrosion processes can severe and pipe rupture

may occur. Hard and tough coatings may break,

and even CP systems can cause uncontrolled

situations depending on coating choices of the

mainline and joints. The industry is looking for

low cost cycle so-called sustainable solutions.

Solutions to last whereever the project takes. No

looking back after installation, but also no worries

during transport and installations. Systems which

are applicator and environmentally friendly. A

system which overcomes the coating problems

of today such as disbondment, stress corrosion

cracking, delamination, etc. The market today is

asking for safe, easy and quick solutions from

a holistic projectview. Pipeline logistics is main

cost driver of every pipeline construction project.

The result of combining STOPAQ’s technology

with existing solutions such as GRE, Polyester,

Extruded PP, PE, or liquid Polyureas, we can offer a

longterm cost-effective solution delivering longterm

protection against corrosion drivers such as ac/dc

current, stray current, MIC, abrasion, movements,

disbondment.

We see stopping corrosion as our mission.

Factory Applied STOPAQ Technology offers

you more control in all process steps from design,

fabrication, transport, construction and operation

beyond the design life.

For more information regarding specifications,

track records and other commercial / technical

information, please consult STOPAQ FAST division

at STOPAQ B.V.

STOPAQ B.V.P.O. Box 2859500 AG StadskanaalThe Netherlandst +31 (0)599 69 61 70f +31 (0)599 69 61 77e info@stopaq.comi www.stopaq.com