Fastener Recognition/Tech Sheetmacpac1.com/catalog/1800.pdf · 2020. 3. 29. · Code Size Box List/M 90S 6 x 1-1/4" 10000 $ 35.71 90GR 6 x 1-1/2" 5000 38.56 Code Size Box List/bx

Fax (415) 552-5840Tel (415) 552-5500www.macpac1.com

MACMURRAY PACIFIC

Fastener Recognition/Tech Sheet

Nominal orScrew Diameter

Threadsper inch

MajorDiameter

MinorDiameter

LengthRange

Min. TorqueLbs./inch

#5 0.125 14 .128/.122 .078/.072 3/8" - 1" 18

#6 0.138 13 .141/.135 .0787/.087 3/8" - 1-1/2" 18

#7 0.151 12 .154/.148 .0874/.096 1/2"- 2" 22

#8 0.164 11 .168/.161 .0937/.1028 1/2"- 3" 28

#9 0.177 10 .181/.174 .0984/.1098 1"- 4" 32

#10 0.190 9 .194/.187 .1098/.1189 5/8"- 6" 39

Head DiameterSize Max Min Driver Size

#4 .225 .195 1

#5 .252 .220 2R

#6 .255 .240 2R

#7 .295 .267 2

#8 .332 .292 2

#9 .335 .295 2

#10 .385 .340 2

Flat Heads Pan Heads for Framing Screws

Oval Heads


#5 .252 .220 2R

#6 .279 .244 2R

Pan Heads


#6 .270 .256 2R

#7 .296 .281 2

#8 .322 .306 2

#9 .373 .357 2


#7 Modified Modified 2R

Truss Heads


#6 .321 .303 2R

Combo-Truss Heads for Machine Screws


#8 .384 .364 2,2R

Combo-Round Washer Heads


#8 .321 .303 2R

#9 .471 .376 2

#10 .500 .472 2

Large Round Washer Heads


#8 .500 .472 2,2R

1800

18

Fax (415) 552-5840MACMURRAY PACIFIC Tel (415) 552-5500www.macpac1.com

Page No.

BUGLE HEAD (Drywall) SCREWS 1810

CABINET CONNECTING SCREWS 1814-1818

CONFIRMAT SCREWS/CAPS/DRILLS 1817

COVER CAPS1813-1814,1827

DRAWBOLTS 1835

DRAWERFRONT SCREWS/ADJUSTERS 1819

DRAWERSLIDE SCREWS (Euro guide) 1822

DRAWERSLIDE SCREWS (ball-bearing) 1821

DRAWERSLIDE SCREWS (undermount) 1822

EURO/SYSTEM SCREWS 1820

FACE FRAME SCREWS 1806

FASTAP SCREWS (Interior/Exterior) 1811-1813

FLAT HEAD WOOD SCREWS (FHWS) 1823

FLAT HEAD TAPPING SCREWS (FHTS) 1824

GRASS WOOD SCREWS 1822

HARDWARE (Machine) SCREWS 1821

SCREW & FASTENER INDEX

(6-58FPDT)

(4688) (4460)

(7-58FPDT) use 6-58FPDT, 58-6 PHDT for clips

1801

18


MACMURRAY PACIFIC

Page No.

HEX HEAD SCREWS 1817

KOLBE KORNERS 1833

MELAMINE SCREWS 1812

PAN HEAD SCREWS 1824

PARTICLE BOARD SCREWS 1806

NIBBED HEAD SCREWS (self-countersinking) 1807-1808

REAR SOCKET SCREWS 1822

SALICE EURO SCREWS 1820

SPAX SCREWS 1813

SCREW DRIVER TIPS (Pozi, Phillips, Square) 1825-1826

SQUARE DRIVE CABINET MAKER SCREWS1806, 1808,1820, 1822

TITUS CONNECTORS 1814-1816

TITUS SCREWS (Hi-Lo) 1814

WHITE INSTALLATION SCREWS 1809

TRIM HEAD STREAKERS 1810

WIC INSTALLATION SCREWS 1809

SCREW & FASTENER INDEX cont.

1802

18


SENCO STAPLES

Use the E10 withKV 255 standards!

Dealer No. B/C

Crown: 3/16 (4.8)Width: .030Thickness: .0215Gauge: 22




Note: Dimensions over each staple show leg length.


FINE WIRE STAPLES - 3/16" Crown

Box Boxes/Code Finish Length Qty Case List/bxA08BABP Galv. 1/2" 30,000 8 $ 112.00D10BABPN Galv. 5/8" 23,000 8 86.68E08BAA Galv. 1/2" 10,000 16 49.95E10BAA Galv. 5/8" 5,000 25 32.13

1/2 5/8

A08 D10

1/2 5/8

E08 E10

MEDIUM WIRE STAPLES - 1/4" Crown

L08BAB Galv. 1/2" 10,000 8 $ 34.77L10BABN Galv. 5/8" 5000 12 22.08L11BRB Metallic 3/4" 5000 10 19.10L12BAB Galv. 7/8" 5000 10 27.53

L13BRBN Metallic 1" 5000 8 22.53L14BRB Metallic 1-1/8" 5000 6 35.98L15BRB Metallic 1-1/4" 5000 6 30.09L17BAB Galv. 1-1/2" 6000 6 36.93

1/2 5/8 3/4 7/8 1 1-1/8 1-1/4 1-1/2

L08L10

L11L12

L13L14

L15

L17

M10BRBN Metallic 5/8" 5000 9 $ 33.44M11BRBN Metallic 3/4" 5000 8 39.19M13BRB Metallic 1" 5000 6 43.71M15BAB Galv. 1-1/4" 10,000 1 115.55

MEDIUM WIRE STAPLES - 3/8" Crown5/8 3/4 1 1-1/4

M10M11

M13M15

HEAVY WIRE STAPLES - 7/16" Crown

N13BAB Galv. 1" 5000 4 $ 42.54N15BRB Metallic 1-1/4" 10,000 1 87.42N17BRB Metallic 1-1/2" 10,000 1 88.00N19BRB Metallic 1-3/4" 10,000 1 106.75N21BRB Metallic 2" 10,000 1 108.65

1 1-1/4 1-1/2 1-3/4 2

N13N15

N17N19

N21

MEDIUM WIRE STAPLES

1803

18


MACMURRAY PACIFIC

SENCO FINISHING NAILS & BRADS & PINS

AY10 Galv. 5/8" 5000 24 $ 29.53AY11 Galv. 3/4" 5000 20 30.98AY13 Galv. 1" 5000 16 34.41AX13 Galv. 1" 5000 16 18.20AX15 Galv. 1-1/4" 5000 12 16.52AX17 Galv. 1-1/2" 5000 10 18.42AX18 Galv. 1-5/8" 5000 10 34.34AX19 Galv. 1-3/4" 5000 5 32.30A202009 Galv. 2" 800 5 9.64AX21EAAN Galv. 2" 5000 6 51.07

SENCO BRADS & NAILS

1-1/4 1-1/2

AX = Medium Head BradAY = Slight Head Brad

18 Gauge Pins

A101509

1/2 5/8 3/4 1

15 Ga. 34° Angled Strip Finish Nails Code Finish Length QtyBoxes/Case

List/bx

DA13EPB Metallic 1" 4000 5 $ 44.83DA15EPB Metallic 1-1/4" 4000 5 46.62DA17EPB Metallic 1-1/2" 4000 5 43.06DA17EABN Galv. 1-1/2" 4000 5 90.71DA19EPB Metallic 1-3/4" 4000 4 55.75

DA21EPB Metallic 2" 4000 4 56.24DA21EABN Galv. 2" 4000 4 81.09DA23EPB Metallic 2-1/4" 4000 3 63.57UA25EPB Metallic 2-1/2" 3100 3 103.00DA25EPB Metallic 2-1/2" 4000 3 60.66DA25EAB Galv. 2-1/2" 3000 3 70.60

18 Ga. Straight Strip Brad Nails

AZ08EAAN Galv. 1/2" 5000 32 $ 29.62AZ11EAAN Galv. 3/4" 5000 24 37.58AZ13EAAN Galv. 1" 5000 16 33.96

Straight StripMicro Pins

Nail: Smooth shank,brad-head finishingGauge: 15 (.069) (14 (.077) on UA25)

A100509 Galv. 1/2" 2600 5 $ 17.38CZ08EAA Galv. 1/2" 15500 4 103.94A100629 Galv. 5/8" 2600 5 16.44CZ10EAA Galv. 5/8" 15500 4 107.92A100759 Galv. 3/4" 2600 5 17.38CZ11EAA Galv. 3/4" 15500 4 113.54A101009 Galv. 1" 2600 5 15.43A101259 Galv. 1-1/4" 2600 5 16.95A101379 Galv. 1-3/8" 2600 5 36.28A101509 Galv. 1-1/2" 2600 5 17.90

23 Gauge Pins

1-3/8

A101379

A101259

A101009

A100759, C

Z11

A100629, C

Z10

A100509, C

Z08

1/2 3/4 1

AZ13

AZ11

AZ0818 Ga.

23 Ga.

Dealer No. B/C 1804

18


Code Description List/bxP6/10L 3/8” Headless Pins $ 13.70P6/12L 1/2” Headless Pins 14.10P6/15L 5/8” Headless Pins 12.06P6/20L 3/4” Headless Pins 18.65P6/22L 7/8” Headless Pins 19.33

P6/25L 1” Headless Pins 19.11P6/28L 1-1/8” Headless Pins 21.81P6/30L 1-3/16” Headless Pins 23.38P6/35L 1-3/8” Headless Pins 22.56P6/38L 1-1/2” Headless Pins 33.16

P6/40L 1-9/16” Headless Pins 36.52P6/45L 1-3/4” Headless Pins 38.67P6/50L 2” Headless Pins 45.21

GBN18-15 5/8” Brad Nails 22.90GBN18-25 1” Brad Nails 27.59GBN18-32 1-1/4” Brad Nails 29.10GBN18-38 1-1/2” Brad Nails 30.46GBN18-50 2” Brad Nails 31.23

P6 Series23 gauge

Headless pins10,000/box

GBN Series18 gaugeBrad NailsMedium

Head5,000/box

X06NRA - 3/8" X08NRA - 1/2"

Code Size Box QtyBoxes/

case List/boxX06NRA 3/8" 5,000 1 $ 191.22X08NRA 1/2" 4,000 1 173.91

Crown: 7/16" (11.1)Thickness: .20Gauge: 25

Y05 Brt. Brass 5/16" 3000 8 $ 111.95Y07 Brt. Brass 7/16" 3000 8 123.93Y09 Brt. Brass 9/16" 3000 6 152.32

Code Description List/eaP635 3/8”- 1-3/8” Pinner $ 372.40P650 3/8”- 2” Pinner 578.54

23 Gauge Headless Pinner

SENCOR™ CORRUGATED FASTENERSSenco - For the SC2 Tool

Crown: 1", Thickness: .020", Gauge: 25Order by the box.

PinnerP635 3/8" - 1-3/8"P650 3/8" - 2"

Headless Pins / Med Head Brads

Dealer No. B/C

GREX TOOLSHeadless Pinners and Pins

1805

18


MACMURRAY PACIFIC

Square Dr. Phillips Dr.

SCREWS

Dealer No. B/E

FACE FRAME SCREWSQuickscrews

Pan Head with Type 17 Auger Point for quicker penetration. For hardwoods such as Oak or Maple.

Square Dr Size Ctn List/M2722 6 x 1-1/4" 8000 $ 21.442724 6 x 1-1/2" 7000 26.47

Phillips Hd Size Ctn List/M5715 6 x 1-1/4" 8000 $ 23.785716 6 x 1-1/2" 7000 23.16

"QUICk CUTTER" FACE FRAME SCREWS Quickscrews

Square Pan Head Face Frame screws with a double auger point for fast cutting. For easy installation in ex-tremely hard woods, such as hickory.

Code Size Ctn List/M4082 6 x 1-1/4" 8000 $ 28.045215 6 x 1-1/2" 7000 27.63

FACE FRAME SCREWS - For Particle BoardQuickscrews

A face frame screw with a coarse thread for faster driving and superior holding in softwoods, MDF, and particleboard. Type 17 Auger Point and #2 Square Dr.


"HI-LOW" POCkET HOLEFACE FRAME SCREWSQuickscrews

Plain Steel Finish. #2 Square Drive Head. Hi-Low Thread. Type 17 Auger Pt.


FACE FRAME SCREWSGrabber

Pan Head Self-Tapping - for hardwoods. For cabinet assembly and installation. Has a special auger point designed to bore a pilot hole in the hardest wood. Drives faster, eliminates splitting. Black.

Code Size Box List/bxV90-4 6 x 1-1/4" 1060 $ 39.85V90 6 x 1-1/2" 920 41.85

PHILLIPS HEAD - Five Pound Boxes

PHILLIPS HEAD - Bulk Pack

Code Size Box List/M90S 6 x 1-1/4" 10000 $ 35.7190GR 6 x 1-1/2" 5000 38.56

Code Size Box List/bxV902Q4 6 x 1-1/4" 1105 $ 39.11V902Q 6 x 1-1/2" 950 39.11

SQUARE DRIVE - Five Pound Boxes

SQUARE DRIVE - Bulk Pack

Code Size Box List/M902Q4 6 x 1-1/4" 10000 $ 37.16902Q 6 x 1-1/2" 5000 39.60

1806

18


Dealer No. B/E

SCREWS

Small Pack Size Ctn List/M2477 1 x 8 1000 $ 20.762478 1-1/4 x 8 1000 25.182482 1-1/2 x 8 1000 29.022483 1-5/8 x 8 1000 33.032484 2 x 8 1000 37.572485 2-1/2 x 9 500 51.782486 3 x 9 500 67.92

Bulk Pack Size Ctn List/M1245 1 x 8 11000 $ 18.271247 1-1/4 x 8 9000 22.041250 1-1/2 x 8 7000 25.861252 1-5/8 x 8 5500 28.501254 2 x 8 4000 34.771256 2-1/2 x 9 2500 54.341258 3 x 9 2000 67.75

CABINET ASSEMBLY SCREWSQuickscrews

Flat head with 4 nibs for self-countersinking. Zinc plated.

Flat Head with 4 Nibs

Phillips Head

Small Pack Size Ctn List/M1177 1 x 8 1000 $ 21.361178 1-1/4 x 8 1000 26.741179 1-1/2 x 8 1000 28.271180 1-5/8 x 8 1000 33.991181 2 x 8 1000 40.151183 2-1/2 x 9 500 57.881184 3 x 9 500 66.81

Bulk Pack Size Ctn List/M136 1 x 8 11000 $ 18.46137 1-1/4 x 8 9000 22.17138 1-1/2 x 8 7000 27.62139 1-5/8 x 8 5500 28.54140 2 x 8 4000 34.69142 2-1/2 x 9 2500 44.20143 3 x 9 2000 55.89

CABINET ASSEMBLY SCREWS

Type 17 Auger point for quicker penetration. PhillipsFlat Head with 4 nibs for self-countersinking. Zinc plated.

Type 17Auger Point

Small Pack Size Ctn List/M9124 1 x 8 1000 $ 22.8013404 1-1/8 x 8 1000 25.749126 1-1/4 x 8 1000 27.019127 1-1/2 x 8 1000 30.389128 1-5/8 x 8 1000 36.699129 1-3/4 x 8 1000 32.829131 2 x 8 1000 43.569134 2-1/2 x 9 500 54.159135 3 x 9 500 66.26

Phillips Head

Bulk Pack Size Ctn List/M9005SG 1 x 8 11000 $ 21.2713362 1-1/8 x 8 10000 22.979006SG 1-1/4 x 8 9000 23.639007 1-1/2 x 8 7000 27.019008 1-5/8 x 8 6000 33.379009 1-3/4 x 8 6000 29.949010 2 x 8 4000 35.539011 2-1/4 x 8 3000 44.419012 2-1/2 x 9 2500 53.879013 3 x 9 2000 62.59

CABINET ASSEMBLY SCREWSType 17 Combo Head

Type 17 Auger point for quicker penetration. Combo Square/Cross recess Flat Head with 4 nibs for self-countersinking. Coarse thread. Zinc plated.

CABINET ASSEMBLY SCREWS cont.

Phillips Head Type 17Auger Point

1807

18


MACMURRAY PACIFIC

Dealer No. B/E

SCREWS

Small Pack Size Ctn List/M12657 1 x 8 1000 $ 23.2512658 1-1/4 x 8 1000 26.6012659 1-1/2 x 8 1000 30.8412660 1-5/8 x 8 1000 37.2912661 1-3/4 x 8 1000 37.4812662 2 x 8 1000 44.5912664 2-1/2 x 9 500 63.1212665 3 x 9 500 68.49

Bulk Pack Size Ctn List/M12613 1 x 8 11000 $ 18.7812614 1-1/4 x 8 9000 22.8412615 1-1/2 x 8 7000 26.2812616 1-5/8 x 8 5500 31.0412617 1-3/4 x 8 5500 33.0412618 2 x 8 4000 37.1012620 2-1/2 x 9 2500 52.5612621 3 x 9 2000 57.23

Square Drive Flat Head Screws. Four nibs on-head for self counter-sinking and a type 17 auger point for quicker penetration. Zinc in color.

All sizes 1" length and shorter are fully threaded.

CABINET ASSEMBLY SCREWSType 17 #2 Square Drive

CABINET ASSEMBLY SCREWSROUND WASHER HEADType 17 #2 Square Drive

#8 x 1-1/4", Round Washer Head, #2 Square Drive, Coarse Thread, Type 17 Auger Point, Zinc in color.

Code Size Ctn List/M13292 1-1/4 x 8 9000 $ 24.73

CABINET ASSEMBLY SCREWSQUICk CUTTERType 17 Phillips Flat Head

For Hardwood Applications

Phillips flat Head with 4 nibs, Double Auger Shank, and Type 17 Auger Point. Minimizes pre-drilling in hardwood applications. Replaces Twinfast-type fasteners. Zinc in color.

Code Size Ctn List/M7317 1-1/4 x 8 9000 $ 30.607318 1-1/2 x 8 5000 33.247319 1-5/8 x 8 5500 37.347320 1-3/4 x 8 4000 37.817322 2 x 8 4000 44.947323 2-1/4 x 8 3000 51.667324 2-1/2 x 8 2500 64.467325 3 x 8 2000 72.527326 3-1/2 x 10 1000 122.507327 4 x 10 1000 140.85

CABINET ASSEMBLY SCREWSROUND WASHER HEADCombo Square/Phillips Drive

#8 x 1-1/8", Round Washer Head, Combo Drive #2 Square/Phillips, Coarse Thread, Zinc in color.

Designed for softer woods or particle board.

Code Size Ctn List/M6468 1-1/8 x 8 9000 $ 25.98

1808

18


White

2X2QB

SCREWS

Dealer No. B/E

CABINET INSTALLATION SCREWWorks in both Wood or Metal Studs

These WI approved installation screws work in wood or metal studs. They have a #3 Phillips Round Washer Head, Hi-Lo thread and a double auger. Zinc in color.

Code Size Ctn List/C8214 2-1/2 x 14 1500 $ 16.238215 3 x 14 1200 19.058216 3-1/2 x 14 1000 30.618217 4 x 14 700 33.39

WI Approved

CABINET INSTALLATION SCREWRound Washer Head

Combo Square Drive and PhillipsHead. Zinc Plate or Painted Head: White, Sand or Black. Quick Cutter™ Double Auger.

White Sand Black

Code Size Head Ctn List/M7927 2-1/2 x 10 Zinc 1500 $ 81.547935 3 x 10 Zinc 1500 88.347936 3-1/2 x 10 Zinc 1000 113.038010SG 2-1/2 x 10 Ptd. White 1500 88.168011 3 x 10 Ptd. White 1500 120.4513794 3 x 10 Sand 1500 126.389912 3 x 10 Black 1500 120.51

Zinc

14 x 3" PAN HEAD SCREWQuickscrews

Code Size Ctn List/C2769 3 x 14 1000 49.59

These #14 x 3" Phillips Pan Head self-tapping sheet metal screws meet WIC recommendations for cabinet installation on wood or metal studs.

QUADREX WHITEPOWDER COATED SCREWSEpoxy coated, Quadrex head

White, epoxy-coated Quadrex head screws are deep thread with a pan/washer head. Head size is 3/8" diameter. Drives best with the 2X2QB Quadrex Head screwdriver, though a #2 Square driver (X950-2 Apex for example) will work.

Code Size Box List/bx8118B 1-1/8" x 8 5000 $ 248.708114B 1-1/4" x 8 5000 192.89

8212 2-1/2" x 8 500 53.048212B 2-1/2" x 8 2500 208.19

8300 3" x 8 500 68.908300B 3" x 8 2000 232.19

QUADREX SCREWDRIVER BITSqare/Phillip Drive Combo Head

The 2X2QB combo head screwdriver bit has both Square drive and Phillips drive "teeth." This makes it a fine bit to use with the Quadrex white screws as well as the Spax screws.

Code: 2X2QB List: $ 5.40 ea.

1809

18


MACMURRAY PACIFIC

(Approx. count)

Dealer No. B/E

SCREWS

Code Size Ctn List/M9693 4 x 10 1000 $ 115.10

BUGLE HEAD COARSE SCREWGrabber

Fastens sheetrock to wood, with superior holding power and ease of penetration. No. 2 Phillips recess. Black.

One Pound BoxesCode Size Box List/bxX300 1-1/4 x 6 262 $ 7.60X400 1-5/8 x 6 202 7.24X500 2 x 7 140 7.63X1100 3 x 8 80 7.63

Five Pound BoxesCode Size Box List/bxV100 1 x 6 1580 $ 31.84V300 1-1/4 x 6 1315 33.92V400 1-5/8 x 6 1010 33.56V500 2 x 7 702 31.96V1100 3 x 8 400 33.56

Bulk BoxesCode Size Box List/M100GR 1 x 6 10000 $ 14.96 200GR 1-1/8" x 6 10000 15.78300GR 1-1/4 x 6 8000 17.04400GR 1-5/8 x 6 5000 21.77500GR 2 x 7 3500 32.55900 2-1/2 x 8 2500 44.871100GR 3 x 8 2000 56.94

Phillips Bugle Head, coarse thread screws. Black in color.

DRYWALL SCREWSQuickscrews

BUGLE HEAD FINE SCREWGrabber

For sheetrock and metal studs. Attaches sheetrock to 20-25 gauge steel. Standard bugle head. No. 2 phil-lips recess. Black.

Five Pound BoxesCode Size Box List/bxV968 2-1/2 x 8 475 $ 31.96V1168 3 x 8 400 27.32V1368 4 x 10 235 67.99

(Approx. count)

Bulk BoxesCode Size Ctn List/M968 2-1/2 x 8 2500 $ 53.141168 3 x 8 2000 56.761368 4 x 10 1000 141.87

BUGLE HEAD CABINET SCREWGrabber

For cabinet assembly and installation. No. 2 Phillips recess. Black.

Code Size Ctn List/M6W 1-1/2 x 7 5000 $ 40.31

TRIM HEAD STREAkERSGrabber

Attaches wood trim over single or double layer gyp-sum board to 20-25 ga. steel. Square Drive. Black.

Code Size Ctn List/M17S 1-5/8 x 7 10000 $ 31.1018S 2-1/4 x 7 5000 47.9417S76 3 x 8 2000 72.67

Self-Drilling Streaker:17SD76 3 x 8 2000 84.35

1810

18


Dealer No. B

FASTAP SCREWS

PatentedPower Point

This Not This

Code Size Color Box List/BoxFTPB100 1" x 7 Black 100 ea. $ 4.37FTP100W " Black 1000 30.33FTP100WU " Unichr. 1000 30.33

FTPB125 1-1/4" x 7 Black. 100 4.61FTP125W " Black 1000 35.18FTP125WU " Unichr. 1000 35.18FTP125WSQ " Sq Dr. Black 1000 35.18

FTPB162 1-5/8" x 7 Black 100 5.82FTP162W " Black 1000 43.68FTP162WU " Unichr. 1000 43.68FTP162WSQ " Sq Dr. Black 1000 43.68

FTPB200 2" x 7 Black 100 7.28FTP200W " Black 1000 54.59FTP200WU " Unichr. 1000 54.59FTP200WSQ " Sq Dr. Black 1000 54.59

FTPB225 2-1/4" x 8 Black 100 9.83FTP225W " Black 500 37.61FTP225WSQ " Sq Dr. Black 500 37.61

FTPB250 2-1/2" x 8 Black 100 11.53FTP250W " Black 500 43.68FTP250WU " Unichr. 500 43.68FTP250WSQ " Sq Dr. Black 500 43.68

FTPB300 3" x 8 Black 100 13.59FTP300W " Black 500 49.74FTP300WU " Unichr. 500 49.74FTP300WSQ " Sq Dr. Black 500 49.74

Code Size Color Box List/BoxFTP100B 1" x 7 Black 10000 $ 271.75FTP100BU " Unichr. 10000 271.48

FTP125B 1-1/4" x 7 Black 8000 257.18FTP125BU " Unichr. 8000 257.18

FTP162B 1-5/8" x 7 Black. 5000 198.97FTP162BU " Unichr. 5000 198.97

FTP200B 2" x 7 Black 3500 178.35FTP200BU " Unichr. 3500 178.35

FTP225BU 2-1/4" x 8 Unichr. 3000 203.47FTP225BSQ " Sq. Dr. Black 3000 207.43

FTP250B 2-1/2" x 8 Black 2500 202.62FTP250BU " Unichr. 2500 202.62

FTP300B 3" x 8 Black 2000 186.81FTP300BU " Unichr. 2000 184.72FTP300BSQ " Sq. Dr. Black 2000 186.81

FASTAP SELF-DRILLINGCARPENTRY SCREWS

Tougher Than Drywall Screws!

Self-Drilling: Revolutionary Power Point creates a pilot hole as you drive the screw. No pre-drilling needed even in the hardest wood.

45º Threads: Coarse threads with unique 45º angle holds tight for superior pull-out resistance in all woods. Hardened and tempered for greater strength. No need to worry about screws breaking on the job!

Self-Countersinks: Flat head with nibs head design helps resist over-driving and gives you a flush fitting countersink that locks screws tight. Phillips head unless otherwise noted as Square Drive.

SMALL PACkS - FULL CARTONS ONLYBugle Head. Black or Unichrome (highly polished zinc).

Order by Box.

BULk PACk - FULL CARTONS ONLYBugle Head. Black or Unichrome (highly polished zinc).

Order by Box.

1811

18


MACMURRAY PACIFIC

FASTAP SCREWS

FASTAP PLUS DURACOAT XT EXTERIOR SCREWS

Self-Drilling and Toughenedto Bend without Breaking

Silver Duracoat XT all-weather screws for ex-terior use. Self-Drilling and Self-Countersinking.

Far outlasts zinc fasten-ers on decks, construc-tion, marine, etc....45º threads. Phillips head with nibs.

Small Pack Size Box List/BoxDAC134 1-3/4 x 8 100 $ 10.07DAC138 1-3/8 x 8 100 8.62DAC200 2 x 8 100 11.76DAC225 2-1/4 x 9 100 15.41DAC250 2-1/2 x 9 100 17.16DAC300 3 x 9 100 18.50DAC334 3-3/4 x 10 50 18.68DAC450 4-1/2 x 10 50 26.83DAC500 5 x 10 25 19.06DAC600 6 x 10 25 24.25

Whs Pack Size Box List/BoxDAC134W 1-3/4 x 8 1000 $ 75.77DAC138W 1-3/8 x 8 1000 62.27DAC200W 2 x 8 1000 92.29DAC225W 2-1/4 x 9 500 62.27DAC250W 2-1/2 x 9 500 67.28DAC300W 3 x 9 500 74.45DAC334W 3-3/4 x 10 250 74.14DAC450W 4-1/2 x 10 250 117. 70DAC500W 5 x 10 250 140.75DAC600W 6 x 10 250 187.46

Bulk Pack Size Box List/BoxDAC134B 1-3/4 x 8 5000 $ 355.78DAC138B 1-3/8 x 8 7000 383.46DAC200B 2 x 8 3500 292.56DAC225B 2-1/4 x 9 3000 331.76DAC250B 2-1/2 x 9 2500 312.98DAC300B 3 x 9 2000 279.59DAC334B 3-3/4 x 10 1500 417.35DAC450B 4-1/2 x 10 1000 449.40DAC500B 5 x 10 800 569.72DAC600B 6 x 10 2000 582.92

Full cartons only.Order by Box.

FASTAP MELAMINE SCREWS

Code Size Box List/BoxMEL100W 1 x 8 1000 $ 40.04MEL118W 1-1/8 x 8 1000 36.64MEL125W 1-1/4 x 8 1000 44.89MEL138W 1-3/8 x 8 1000 48.53MEL158W 1-5/8 x 8 1000 58.23MEL200W 2 x 8 1000 70.37

Unique design joins melamine without predrilling. The Flat Head screws have nibs for a flush fit. All with Phillips drive. Unichrome finish.

Warehouse Pack: 1000 per box, Order by Box.

Bulk Pack: Order by Box.

Code Size Box List/BoxMEL125B 1-1/4 x 8 8000 $ 339.71

FASTAP TRIM HEAD FINISHING SCREWS

Gold in color. Self-drilling and self-countersinking. With 45º threads. Sq. Drive. Full boxes only.

Code Size Box List/BoxB150TTSQ 1-1/2 x 6 100 $ 5.58FTP150TTWSQ 1-1/2 x 6 1000 38.82B225TTSQ 2-1/4 x 7 100 8.01FTP225TTWSQ 2-1/4 x 7 1000 59.45FTP225TTBSQ 2-1/4 x 7 3000 175.16FTP300TTBSQ 3 x 8 2000 198.95

Order by Box.

1812

18


Dealer No. B/E

SPAX SCREWS

• Dual drive, high holding power• Break resistant head and shaft• Flat head, Zinc plated, 90º Countersunk

• Patented saw action threads drive without pre-drilling. Joins melamine and particle board cleanly.• Screws are stress-relieved to reduce head and shaft breakage. Screw neck is reinforced.• Threads are the deepest available for the best tear out resistance.

Saw Action threads

Unidrife® head fits either Phillips or square drive

Strong neck

FullThread

Partial Thread,Deck Screw

FASTAP BIT TIPS

Code Description Ctn List/bgPBT #2 Phil. Hd. 2 ea/bag

For 1"- 3" Screws10 bgs $ 1.21

PBT #3 Phil. Hd. 1 ea/bagFor 3-1/4" to 6" Screws

10 .61

SBT #1 Sq. Hd. 2 ea/bagFor Trim Hd. Screws

10 1.21

SBT #2 Sq. Hd. 2 ea/bagFor 1"- 3" Screws

10 1.21

SCREW COVER CAPS

Flexible plastic screw caps give a flush finished look to surfaces. Flexible grooved pegs with hollow core ensure a firm hold on screw races. Use finger or ham-mer to tap into screw head. Fits any #2 square drive or phillips drive.

Bulk: Sold in Full Cartons only.Code Color Ctn List/M5525-014B Black 1000 $ 28.765525-010B White 1000 28.755525-058B Brown 1000 24.70

SPAX SCREWS

• No Pre-drilling• Drives easily into: Melamine, Particle board, Plywood, Hardwood, Plastics

Full Thread Size Ctn List/M12-6F 1/2 x 6 1000 $ 31.6758-6F 5/8 x 6 1000 32.8234-6F 3/4 x 6 1000 36.161-6F 1 x 6 1000 41.55114-6F 1-1/4 x 6 1000 45.03112-6F 1-1/2 x 6 1000 50.9434-8F 3/4 x 8 1000 39.821-8F 1 x 8 1000 40.93114-8F 1-1/4 x 8 1000 47.46112-8F 1-1/2 x 8 1000 69.62134-8F 1-3/4 x 8 500 71.922-8F 2 x 8 500 91.71212-8F 2-1/2 x 8 500 95.07

Partial Thread Size Ctn List/M112-6 1-1/2 x 6 1000 $ 50.51134-6 1-3/4 x 6 1000 32.76112-8 1-1/2 x 8 1000 60.29134-8 1-3/4 x 8 500 53.73

Partial Thread Size Ctn List/M3-8D 3 x 8 200 $ 107.75312-10D 3-1/2 x 10 200 141.81

Deck Screw

1813

18


MACMURRAY PACIFIC

Code Description Ctn List/M5554YA Dowel, 8mm x 34mm 2000 $ 161.57

Dealer No. B/E

5656

CABINET CONNECTORS

TITUS CONNECTOR SCREWSPozi Drive, Funnel Head

Titus Connector Screws are excellent for cabinet and wall unit construction. The Hi-Lo thread and narrow shaft offer low bursting pressure and good holding performance. Hole Boring: Simple straight through or straight blind holes drilled from one side of the board only. Drill 3mm (1/8") dia. hole for screw shank. Use on 5/8" or 3/4" board. Case hardened carbon steel. Pozidrive; funnel head.

Code Size Ctn List/M00062PH 25mm x 8mm 10000 $ 29.9800071PH 33mm x 8mm 14000 34.5500077PH 45mm x 8mm 10000 39.2306077PH 50mm x 8mm 6000 49.9306080PH 50mm x 11mm 6000 64.54

TITUS DOWEL& CAM CONNECTORS

PUSH-IN DOWEL

Push-in dowel with plastic expanding sleeve. Tool-free fix-ing of dowel into face boring cuts assembly time by 50%. Klix feature provides a strong, vibration proof connection. Dark Gray in color. Dimensions: A = 8mm, A.1 = 8mmB = 34mm, D = 12mm

Suits all Titus dowels. Straight lower edge facilitates alignment and positioning during production. Klix feature provides a strong, vibration-proof connection. Die-cast zinc. Dimensions: A = 15mm, D = 14mm, B = 9.0-9.5mm

TITUS CAM

Code Description Ctn List/M5656ZN Cam, 15mm x 14mm 2000 $ 136.61

5554YA

TITUS SCREW COVER CAPS

Specifically designed for insertioninto the head of the above screws.Simply knock into screw headwith a hammer.

Code Color Ctn List/M01020TAO Light Brown 1000 $ 27.6001020WAO White 1000 19.96

1814

18


Outrigger for 16mm (5/8”) board material

CodeDrill

DepthPanel

Thickness Color Ctn List/ea

06439-835 12.5mm 16mm (5/8”) Black 1250 $ .22

06439-877 12.5mm 16mm “ White 1250 .22

06439-898 12.5mm 16mm “ Brown 1250 .28

06455-847 12.5mm 16mm “ Zinc- All metal

1500 1.01

06397-877 14mm 19mm (3/4”) White 1250 .24

Dowels not included - order separately.

Expanding housings and dowels provide a tight joint.

Drop-on insertion of shelf panel: only from the top.

Expanding DowelsDowel ø5

TITUS SYSTEM 6, QUICkFIT EXPANDOExpanding Dowels and Double-ended Dowels

TITUS SYSTEM 6, QUICkFIT EXPANDO20mm CamFix outrigger

• Housing expands when cam is tightened: provides a tight joint• Drop-on insertion of shelf panel• All metal (stronger) or metal/plastic• Strong vibration-proof connection with "Klix" locking feature• Face boring only - no edge boring required• Angle drive feature on cam for driving comfort

Code Description Ctn List/ea.6408 Dowel, ø5 5000 $ .10

CABINET CONNECTORS

1815

18


MACMURRAY PACIFIC

QUICkFIT CONNECTORS

Carbide tipped boring bit.20mm diameter.57.5mm overall length.Shank: 10mm outside dia.

Screw-in Dowel:

• Has 5mm Eurothread• Integral skirt acts as positive stop during insertion

Drop-on

Dealer No. B/E

06433

06472

TITUS

TITUS QUICkFITEXPANDO-6 HOUSING

• Push-in (tool-free) housing is quick and easy to install• Housing is high grade nylon• Inner cam made of diecast zinc• Housing available in a variety of plastic colors• Suitable for 18mm/19mm board• Connection with dowel is drop-on• When housing is pushed into the underside of shelving, Posi-drive locking of cam may take place from above or below• Housing expands inside panel on locking• Klix locking system provides a strong, vibration-proof connection

Pack: 2500 each

Code Color List/M06433AP Oiled Cherry $ 256.2606433CC Cherry 256.2606433GA Hardrock Maple 256.2606433KA Light Brown 368.50

TITUS EXPANDOWEDGEFIX-6 CONNECTOR

• All plastic connector without inner cam• Wedgefix may be snapped into position on the dowel. It can be unsnapped, should the panel need to be relocated later.• Corrosion-proof• Use only push-in (tool-free) Quickfit-6 expanding dowels

Pack: 2500 each

Code Description Color List/M06472WA Wedgefix Connector White $ 201.53

TITUS QUICkFIT DOWELSFor Expando-6 Housing

06406

Double-ended (Dogbone) Dowel:

• For 19mm board• Push-in (tool-free) installation

6416

Code Description Ctn List06406 Screw-in Dowel 5000 $ 75.536416 Double Dowel 2500 .10

These Zinc die-cast dowels are for ø5mm system holes; they provide a strong, vibration-proof connection.

20mm CMT BORING BIT - RH

Code Description List/ea317.200.11 RH 20mm Boring Bit $ 45.07

/M/ea

1816

18


CONNECTING SCREWSQuickScrews Int’l

ø 8ø5 ø4

CONNECTING SCREWS

Dealer No. B/C

Drilling diagramDimensions in mm

10mm

overall length: 5-3/4"

CONNECTING SCREWS

Zinc-plated, posidrive with hole for cover cap, blunt or point.

Code Shank Length Ctn List/C10552 5mm 50mm 3000 $ 5.5610752 7mm 50mm 2000 9.6402.7501.001.6.3X40 7mm 40mm 100 7.92

STEP DRILL FOR CONNECTING SCREWSQuickscrews

Drills 3 different diameters: 5mm, 7mm, 10mm.

Code Description List/ea12793 Step Drill Bit, High Speed

Steel, USA$ 43.85

Code Description Ctn List/C264.47.138 Bronzed, 50mm 100 $ 22.73

HEX HEAD CONFIRMAT SCREW

CONNECTING SCREWSQuickScrews Int’l

With nibs and a sharp point. Pozi Flat Head. Size: 7mm x 50mm. Head Dia: 7.3mm - 7.5mm. Use with cover caps.

Code Description Ctn List/M5502 7mm x 50mm 2000 $ 62.16

With nibs and a sharp point. Pozi Flat Head. Size: 5mm x 50mm.

Code Description Ctn List/M13720 5mm x 50mm 4000 $ 56.18

1817

18


MACMURRAY PACIFIC

Dealer No. B/E

PANEL CONNECTORS

Complete fittings for connecting single furniture carcases, base frames & constructions. For slotted or philllips. Material: steel, galvanized

PANEL CONNECTORS

Code Thickness Ctn List/ea267.07.902 32-38mm 100 $ 1.50267.07.903 36-42mm 100 .67

SEXBOLTS

1072393 + 1058986

The two cabinet sides are fixed precisely by means of the long thread covers.

This panel connector has a high torque pressure. For 5mm diameter drilling. The thread cover is set back and makes it easier to screw in the connecting screw. The screw is an M4 x 15. All nickel plated steel.

Code Thickness Ctn List/C1058986 36-44mm (male) 2000 $ 9.491072393 36-44mm (female) 2000 14.13

PANEL CONNECTORS

Order screw and sleeve separately. Made of nickel-plated steel. Screw is M4 x 15.

Code Description Ctn List7401M4X15 Screw, L=15mm 1000 $ 8.63/C749310435 Sleeve, 35mm 5000 206.89/M

1818

18


Drilling Distance

40

25 0 x 12.5 depth

Not this.... This!

Fast nail-on alternative to figure eights, connectors, brack-ets and cleating for benchtops and panels. Angled screw hole for ease of screwing with optional screw for connect-ing components.

CORNA QUICk CLIP

Code Description Ctn List/MT191 Snap Clip, Clear 8,000 $ 136.94T190 Dowel, Screw Size: #8 x 1

Pan Hd Phil, Clear8,000 106.16

Dealer No. B/E

DRAWER FRONT SCREWS

Use the T191 Snap Clip with the T190 dowel

DRAWER FRONTADJUSTING SCREWS

Drawer Face

Phillips WasherheadCoarse Thread Screw

Code QS# Size Ctn List/M8-1DFS 1047 1" x 8 7000 $ 31.038-118DFS 2757 1-1/8" x 8 6500 33.098-114DFS 4103 1-1/4" x 8 6500 35.58

With Type 17 Auger Point for quicker penetration in hardwoods:

Code QS# Size Ctn List/M8-118DFS-17 9024 1-1/8" x 8 6000 $ 32.728-114DFS-17 9025 1-1/4" x 8 6000 37.05

Combo-Drive (Sq/Phil), Type 17 Auger Point:Code Size Ctn List/M12625 1" x 8 7000 $ 32.5212626 1-1/8" x 8 7000 36.5212627 1-1/4" x 8 6000 33.24

Ctn: 100 ea.

Code Description List/eaQC Quick Clip $ .36

TITUS DRAWER FRONT ADJUSTER

Use adjuster in pairs to provide alignment on fronts attached to four-sided drawers. 2mm of adjustment in vertical and horizontal directions. Nylon material. 100 per box (8/32" machine screws are not included).

Code Description Ctn List/ea6309 25mm adjuster 100 .63T15025 Bosch 25mm

Carbide RH Drill Bit1 40.68

FALSE FRONT CONNECTOR

1819

18


MACMURRAY PACIFIC

GRASS EURO SCREW APPLICATIONSUse Grass Euro screws with 6036, 6236, 6436, etc. metal drawer system. (Some generic Euro screws go right through the cabinet member.) Grass Euroscrews are phillips drive.

The 13mm is most common. The 18mm (83000) are for use on drawer guides with "Life Saver" shaped spacers (seldom used).

The 7.5mm is used where either drawer guides or Euro hinge base plates are used back to back on a "common wall".

Grass hinge base plates don't always come with prefixed Euro-screws. You can select the one which serves your need - i.e., 13mm on standard configura-tions, or 7.5mm for back to back mounting.

SALICE EURO SCREWSSalice Euro screws have a stock pan head shape which lends itself only to Salice hinges. Use short 10mm screw for common wall applications. Salice Euro-screw plates always come with prefixed screws unless they are removed at the shop.

GENERIC EURO SCREWSGeneric Euro Screws are a lower cost version of the Grass type. Quality is less consistent. Most are Pozi-drive. They are in general used for Euroslides and for ball-bearing slides.

7.5mm

EURO SCREWS

Baseplates Common Wall

Ball Bearing Slides Euro Slides

Dealer No. B

17mm13mmShort#V236X104

Standard#V236X144

GRASS EURO SCREWSPhillips Flat Head

Code Length Ctn List/M83001 7.5mm 500 $ 85.1081015 13mm 500 104.2483000 18mm 500 122.16

18mm13mm

7.5mm#83001

13mm#81015

18mm#83000

SALICE EURO SCREWSPozi Drive Pan Head

Code Length Ctn List/CV236X104 13mm 100 $ 8.14V236X144 17mm 100 10.22

EURO SCREWSPhil Sq Pozi

Code Head dia x Length Drive Ctn List/M1220 6.3mm x 10mm Pozi 1000 $ 36.80 1097* 6.3mm x 10mm Pozi 10000 31.8313358 6.3mm x 11.5mm Sq #2 10000 18.65

227- 6.3mm x 13mm Pozi 10000 30.2010589 6.3mm x 13mm Sq #2 10000 32.493500 6.3mm x 13mm Phil 10000 30.846061 7mm x 13mm Pozi 3500 37.41

* Full Carton Only

1820

18


Code Size Ctn List/C10950 M4 x 25mm (1") 100 $ 5.7310952 M4 x 35mm (1-3/8") 100 5.0310953 M4 x 38mm (1-1/2") 100 5.2210955 M4 x 45mm (1-3/4") 100 5.88

SCREWS

TRUSS HEAD MACHINE SCREWSQuickscrews

For knobs and pulls.Phillips/Slotted Combo.Zinc Plated.

Code QS # Length Ctn List/CC832-12 1206 1/2" 1000 $ 2.46C832-58 1207 5/8" 1000 2.97C832-34 1208 3/4" 1000 2.84C832-78 1209 7/8" 1000 2.84C832-1 1196 1" 1000 2.95C832-118 1211 1-1/8" 1000 3.27

C832-114 1212 1-1/4" 1000 3.75C832-138 1213 1-3/8" 1000 3.45C832-112 1214 1-1/2" 1000 3.90C832-158 1215 1-5/8" 1000 3.99C832-134 1216 1-3/4" 1000 3.96C832-2 1218 2" 1000 4.97

METRIC TRUSS HEAD MACHINE SCREWSQuickscrews

For knobs and pulls.Phillips/Slotted Combo.Zinc Plated.

BREAkAWAY TRUSS HEAD MACHINE SCREWQuickscrews

Breakaway machine screw with Truss head and Phillips/Slotted combo drive. Zinc. Screws have 4 small Notches. Requires pliers to snap off at desired length.

Code Size Ctn List/M8903 #8-32 x 1-3/4" 1000 $ 46.01

DRAWER SLIDE SCREWS

Phillips Truss Head, Type AB ThreadSize: #8 x 7/16"(Replaces 716-8AC)

#229

Code Color List/C229 Zinc $ 2.0911549 Black 1.8212649 White 5.03

Phillips Low Profile Pan Head,Type A Thread, Zinc.Size: #6 x 7/16"

Code List/C11572 $ 1.82

#11572

Combo Truss Head,Coarse Thread, Zinc.Size: #8 x 7/16"

Code List/M10255 $ 13.47

#10255

Phillips Truss Head,Coarse Thread, Zinc.Size: #8 x 7/16"

Code List/C4460 $ 1.83

#4460

Phillips Round Washer Head,Zinc, Low Profile

Code Size Ctn List/M5213 (Bulk) #8 x 7/16" 20000 $ 15.058810 #8 x 7/16" 1000 23.154688 #8 x 1/2" 14000 17.65

1821

18


MACMURRAY PACIFIC

Dealer No. B/E

SCREWS

DECORATIVEHINGE SCREWSPhillips Drive

Code Description Finish List/M12-5 PHFT-AB 1/2" x 5 Flat Hd Ant. Brass $ 10.3012-5 PHFT-BB 1/2" x 5 Flat Hd Brt. Brass 9.6412-6 PHFT-AB 1/2" x 6 Flat Hd Ant. Brass 13.53

58-5 PHOT-AB 5/8" x 5 Oval Hd Ant. Brass 12.6158-5 PHFT-AB 5/8" x 5 Flat Hd Ant. Brass 12.9558-6 PHOT-AB 5/8" x 6 Oval Hd Ant. Brass 16.6058-6 PHFT-AB 5/8" x 6 Flat Hd Ant. Brass 15.01

Various finishes and head sizes.

ROUND WASHER HEAD COMBO DRIVE

#8 x 3/4" Round Washer Head, #2 Combo Drive, Coarse Thread, Type 17 Auger Point, Zinc

Code Size Ctn List/M8883 #8 x 3/4" 10000 $ 29.57

DRAWER SOCkET SCREWS

Pan head, sharp tipped, deep thread screw for rear drawer mounting sockets. Phillips drive.

Code Drive Size Ctn List/M165 Phillips #8 x 3/4" 100 $ 21.29

With Type 17 Auger Point for quicker penetration:

Code Drive Size Ctn List/M8086 Phillips #8 x 3/4" 1000 $ 23.6713580 Square #8 x 3/4" 1000 24.30

Code Drive Size Ctn List/M6802 Phillips #8 x 3/4" 10000 $ 20.167892 Phillips #8 x 5/8" 10000 23.91

Truss head, sharp tipped, deep thread screw for rear drawer mounting sockets. Phillips drive.

COARSE THREAD WOOD SCREWSQuickscrews

Flat head Phillips wood screws for hingecups, baseplates, drawer slides, etc. Coarse thread for better holding power.Sharp point for easy penetration intomelamine. ZC: Zinc plated, NP: Nickel plated.

Code QS # Finish Size Ctn List/M5-12FPDT 109SG ZC 1/2" x 5 40000 $ 13.076-12FPDT 9526 ZC 1/2" x 6 25000 13.845-58FPDT 110SG ZC 5/8" x 5 30000 14.116-58FPDT 9501SG ZC 5/8" x 6 25000 13.446-34FPDT 9594 ZC 3/4" x 6 20000 16.206-1FPDT 123SG ZC 1" x 6 13000 17.217-34FPDT 3368 NP 3/4" x 7 500 24.1910166 (7-34FPDT Bulk) NP 3/4" x 7 20000 18.267-58FPDT 9223 NP 5/8" x 7 5000 22.967-1FPDT 9218 NP 1" x 7 1000 23.488-58FPDT 127 ZC 5/8" x 8 14000 17.15

COARSE THREAD WOOD SCREWSGrass

Phillips Flat Head. Nickel plated. 500/bag. One bag per carton. Sold in full bags only.

Code Size List/bag81014 1/2" x 6 $ 24.8881001 5/8" x 6 27.9481003 3/4" x 6 27.0481004 1" x 6 29.43

SQUARE DRIVE COARSE THREAD WOOD SCREWSQuickscrews

For Slides and Hinge Baseplates.#2 Square Drive, Flat HeadType 17 Auger Point. Zinc.

Code Size Ctn List/M13465 1/2" x 6 25000 $ 15.8413466 5/8" x 6 25000 15.1413467 3/4" x 6 20000 16.36

PAN HEAD WOOD SCREWS

Phillips Pan Head. Coarse Thread. Zinc plated.

Code QS # Size Ctn List/M58-6 PHDT 158SG 5/8" x 6 25000 $ 11.57

1822

18


Zinc Plated Steel

PHILLIPS FLAT HEAD WOOD SCREWS

FLAT HEAD WOOD SCREWS

Dealer No. B

Pack: 100 ea/box. Full Boxes Only.

Code Size List/C12-4 PHFW 4 x 1/2" $ 4.4812-5 PHFW 5 x 1/2" 4.7212-6 PHFW 6 x 1/2" 4.99

58-4 PHFW 4 x 5/8" 3.6458-6 PHFW 6 x 5/8" 3.37

34-6 PHFW 6 x 3/4" 3.3434-7 PHFW 7 x 3/4" 4.6534-8 PHFW 8 x 3/4" 3.80

1-8 PHFW 8 x 1" 5.11

Code Size List/C112-6 PHFW 6 x 1-1/2" 5.03112-8 PHFW 8 x 1-1/2" 5.46112-10 PHFW 10 x 1-1/2" 6.32

2-6 PHFW 6 x 2" 7.042-8 PHFW 8 x 2" 8.882-10 PHFW 10 x 2" 8.84

212-10 PHFW 10 x 2-1/2" 13.03212-12 PHFW 12 x 2-1/2" 15.54

3-10 PHFW 10 x 3" 16.253-12 PHFW 12 x 3" 15.38

1823

18


MACMURRAY PACIFIC

TAPPING SCREWS

PHILLIPS FLAT HEAD TAPPING SCREWS

Dealer No. B

Zinc Plated SteelPhillips Flat Head

Code Size List/C38-6 PHFT 6 x 3/8" $ 4.06

12-4 PHFT 4 x 1/2" 4.3312-6 PHFT 6 x 1/2" 3.7412-8 PHFT 8 x 1/2" 4.4612-10 PHFT 10 x 1/2" 5.37

58-6 PHFT 6 x 5/8" 4.3358-8 PHFT 8 x 5/8" 5.1558-10 PHFT 10 x 5/8" 5.98

34-4 PHFT 4 x 3/4" 4.4634-6 PHFT 6 x 3/4" 5.8534-8 PHFT 8 x 3/4" 5.7634-10 PHFT 10 x 3/4" 6.1034-12 PHFT 12 x 3/4" 8.10

1-6 PHFT 6 x 1" 7.341-8 PHFT 8 x 1" 7.321-10 PHFT 10 x 1" 7.191-12 PHFT 12 x 1" 8.86

114-6 PHFT 6 x 1-1/4" 7.34114-8 PHFT 8 x 1-1/4" 7.88114-10 PHFT 10 x 1-1/4" 10.16

112-8 PHFT 8 x 1-1/2" 7.37112-10 PHFT 10 x 1-1/2" 9.25

2-8 PHFT 8 x 2" 10.342-10 PHFT 10 x 2" 12.37


Ant. BrassPhillips Flat HeadTapping Screws

Code Size Ctn List/M12-5 PHFT-AB 5 x 1/2" 25000 $ 10.3058-6 PHFT-AB 6 x 5/8" 20000 15.01

PHILLIPS PAN HEAD TAPPING SCREWS

Phillips Pan Head Zinc Plated Steel

Code Size List/C38-4 PHPT 4 x 3/8" $ 3.6138-6 PHPT 6 x 3/8" 4.2238-8 PHPT 8 x 3/8" 4.19

12-4 PHPT 4 x 1/2" 3.9112-6 PHPT 6 x 1/2" 5.1112-8 PHPT 8 x 1/2" 4.6712-10 PHPT 10 x 1/2" 4.40

58-4 PHPT 4 x 5/8" 4.3458-6 PHPT 6 x 5/8" 6.0158-8 PHPT 8 x 5/8" 4.8158-10 PHPT 10 x 5/8" 5.34

34-4 PHPT 4 x 3/4" 5.2834-6 PHPT 6 x 3/4" 4.3434-8 PHPT 8 x 3/4" 4.9734-10 PHPT 10 x 3/4" 4.8934-12 PHPT 12 x 3/4" 8.77

1-6 PHPT 6 x 1" 5.251-8 PHPT 8 x 1" 6.671-10 PHPT 10 x 1" 8.881-14 PHPT 14 x 1" 19.52

114-8 PHPT 8 x 1-1/4" 7.03114-10 PHPT 10 x 1-1/4" 8.80

112-8 PHPT 8 x 1-1/2" 8.21112-10 PHPT 10 x 1-1/2" 9.15

134-12 PHPT 12 x 1-3/4" 11.402-10 PHPT 10 x 2" 13.44


Bulk Phillips Pan Head Tapping Screws

Code Size Ctn List/M167 8 x 1-1/4" 9000 $ 27.27168SG 8 x 1-1/2" 6000 28.65

1824

18


SCREWDRIVER BITS

Dealer No. B (min. Order 10 ea. on Bits)

X - Prefix for extra hardness bits to be used for driving sheet metal or case hardened screws.

I - Prefix for intermediate hardness bits to be used for driving heat-treated screws and for impact use.

FOR PHILLIPS SCREWS - 1/4” Hex Insert440 Series

1" Standard Length Long Length

Code Pt. Size O.A. Length List/eaI440-1 1 1” $ 1.14X440-1 1 1” 1.17I440-2 2 1” 1.22X440-2 2 1" 1.17I440-3 3 1” 1.22X440-3 3 1" 1.13I440-22 2 2" 2.27X440-22 2 2" 2.79X440-23 2 3" 6.09X440-215 2 2-1/2" 1.36

FOR POzI DRIVE SCREWS1/4” Hex Insert440 Series

X440-2-PZD 2 1" $ 1.34X440-3-PZD 3 1" 2.14

FOR PHILLIPS SCREWS1/4” Hex Shank446 Series

I446-2 2 1" $ 1.23X446-1 1 1" 1.30X446-2 2 1" 1.1811760 2 1" .87(QuickScrews)

SQUARE DRIVE BITS

FOR PHILLIPS SCREWS5/16” Hex Shank480 Series

I480-2 2 1-1/4" 3.31X480-2 2 1-1/4" 2.03

X9501/4” Hex Insert

X9541/4” Hex Power Drive

Code Description Ctn List/eaX950-1 1" Square Dr, #1 10 $ 4.74X950-2 1" Square Dr, #2 10 1.49X954-2 1-15/16" Square Dr, #2 10 2.32X954-B-2 3-1/2" Square Dr, #2 10 3.54

FOR PHILLIPS SCREWS1/4” Hex Power Drive492 Series

Code Pt. Size O.A. Length List/eaX492 2 1-15/16” $ 1.89X492-B 2 3-1/2” 2.78

MAGNETIC POWER BITSQuickscrews

Pack: 10 ea.

6" Power Bit. Available in Phillips or Square Drive.

Code Description List/ea12694 6" Phillips Drive #2 $ 5.98 12698 6" Square Drive #2 5.74

Note:

When a #2 bit is needed we recommend the #2 446 Apex series for #5, #6 and short to medium #8 screws (this bit is also known as a #2 recess bit). The 446 series is commonly used to mount drawer slides, face frame plates, and Amerock style hinges.

The #2 440 Apex series is recommended for driving #8 and #10 screws (the 440 will fit smaller screws too, it just performs best on larger screw heads).

1825

18


MACMURRAY PACIFIC

11794 or M490

Use With 1/4” Hex Insert Bit. Body Dia: 1/4”

BIT HOLDERS

Dealer No. B/H

Code Description List2X2QB Combo Head Bit $ 5.40

2X2QB

10-PIECE INSERT BIT kITQuickscrews

Phillips

Pozi

Square

Includes: #1 Phillips Drive Bit #2 Phillips Drive Bit #3 Phillips Drive Bit #2 Reduced Phillips Drive Bit #1 Pozi Drive Bit #2 Pozi Drive Bit #3 Pozi Drive Bit #1 Square Drive Bit #2 Square Drive Bit

Quick Release Magnetic Bit Holder # 11922

Kit contains 9 bits, magnetic quick release bit holder (1/4" x 2") and case.

Code Description List/kit13613 10 piece Bit Kit w/ case $ 18.87

COMBO HEAD SCREWDRIVER BITSquare/Phillip Drive combo Head

The 2X2QB combo head screwdriver bit has both Square drive and Phillips drive “teeth.” This makes it a fine bit to use with the Quadrex white screws as well as the Spax screws. It fills both the Square drive and Phillip’s recess of a Spax screw for maximum driving power.

MAGNETIC BIT HOLDER

Code ManufacturerOverallLength Pack List/ea

11794 Quickscrews 2-7/8" 1 ea. $ 15.41 M490 Apex 3" 1 20.10

QUICk RELEASEMAGNETIC BIT HOLDERQuickscrews

14203

Stainless Steel Magnetic Bit Holder use with any type insert bit works in any standard drill chuck - Quick Release & Super Magnetic. 1/4" x 3".

Code Description List/ea14203 Quick Release Bit Holder $ 11.74

SUPER MAGNETIC BIT HOLDERQuickscrews

11928

1/4” Hex Shank, Overall Length: 2-3/8”

Code Description List/ea11928 Super Mag Bit Holder $ 14.77

• Can’t Loose Tip• Holds Screw Straight• Short Length for narrow space

1826

18


COVER CAPS

PVC Color List/CFC-WH White $ 5.13FC-AL Almond 5.09FC-DG Dark Gray 5.09FC-LG Light Gray 5.09FC-BL Black 5.13FC-HRM Hard Rock Maple 6.44FC-NC Nat. Cherry 7.71FC-BC Bourbon Cherry 6.18FC-SC Select Cherry 6.47FC-PW Pres. Walnut 6.44

Real WoodFC-RO Red Oak 9.30FC-MAP Maple 9.30FC-CH Cherry 9.25FC-MAH Mahogany 9.30FC-VG Vertical Grain Fir 9.30FC-WA Walnut 9.27FC-WB White Birch 9.30FC-AD Alder 9.30

Real Wood, FinishedFC-MPF Maple, Finished 11.29FC-CHF Cherry, Finished 11.27

Dealer No. B/E

1/32" Thick

FASTCAP ADHESIVE-BACkED COVER CAPS9/16" PVC or Real Wood

Cover caps are quick, durable, and self-adhesive. They stay in place and do not depend on the head of the screw for adhesion. The screw can be sunk far below the surface of the material and FastCaps will cover the hole effectively. Low profile so they are less likely to be noticed. Available in PVC or Real Wood.Order by the sheet.

Pack: 52 caps per sheet, 1040 caps per box Please order in increments of 52!

9/16" Dia.

11/16" Dia. FASTCAPS

White PVC , 11/16" (18mm) dia.36 caps per sheet, 20 sheets (720 caps) per box.

Order in increments of 36.

Code Color List/CFC-1116-WH White PVC $ 5.54

1/32" Thick

11/16" Dia.

PVC Color List/CFC-WH-CC White $ 15.99FC-BL-CC Black 15.99FC-AL-CC Almond 16.03FC-NO-CC Natural Oak 20.02FC-HM-CC Hard Rock Maple 20.02FC-MW-CC Mahogany on Walnut 20.04FC-NC-CC Natural Cherry 20.02FC-BC-CC Bourbon Cherry 20.04

Real WoodFC-MAP-CC Maple 27.55FC-CH-CC Cherry 28.92FC-RO-CC Red Oak 28.92

Real Wood, FinishedFC-MP-CCF Maple 35.18FC-CH-CCF Cherry 33.58

ADHESIVE-BACkED CASTLE COVER CAPSFastcap

• Easy to use. They stay in place the first time you stick them over the screw hole.• They do not depend on the head of the screw for adhesion• The screw can be sunk far below the surface of the material and FastCaps will cover the hole effectively

Self-adhesive cover caps to cover holes cut by Castle Pocket Cutter machinery.

Available in PVC colors or real wood veneer.

9/16" x 2-1/2" caps, 1/32" Thick.

Pack: 16 caps per sheet, 320 caps per box Please order in increments of 16!

1827

18


MACMURRAY PACIFIC

Dealer No. B/G

SHIMSAvailable in Two Sizes

Use for• Window Installation • Leveling Appliances• Door Installation • Stir Sticks• Counter Top Installation • Putty Applicators• Cabinet Installation • Squeaky Floors• Floor Leveling • Perfect for retail• Bath Fixture Leveling

8” Pine Shim bundles:12 shims per bundle,36 bundles per boxSold per box. (432 pcs.) Made of Pine.

12” Shim bundles:42 shims per bundle, 12 bundles per boxSold per box. (504 pcs.)

Made from BeddarWood™.Outperforms Pineand Cedar

Sold in Full boxes only

• Excellent snap• Easy to cut• Rot resistant• Will not shrink• Clean and consistent quality• No moldy shims• Certified wood• Split resistant to nails and screws

Code Description List/bxSHIM-8 8" Pine Shims (432 pcs) $ 64.45SHIM-12 12" Beddar Wood Shims

(504 pcs)75.66

SHIMS

Code Size Pcs/Bundle List38-48 3/8" x 4' 200 $ 106.58/C112-48 1-1/2" x 4' 25 16.42/ea

ROD DOWELS

WADDELL RAMINHARDWOOD DOWELSColor coded retail packs

Order in pieces,not per bundle.

Code Size ColorPcs/

Bundle List/C18-36CCR 1/8" x 3' Black 100 $ 17.6718-48CCR 1/8" x 4' " " 100 34.24316-36CCR 3/16" x 3' Gray 100 21.44316-48CCR 3/16" x 4' " " 100 25.8514-36CCR 1/4" x 3' Lt. Green 100 26.9314-48CCR 1/4" x 4' " " 100 30.98

516-36CCR 5/16" x 3' Red 100 27.79516-48CCR 5/16" x 4' " " 100 41.4338-36CCR 3/8" x 3' Blue 100 42.2738-48CCR 3/8" x 4' " " 100 75.98716-48CCR 7/16" x 4' Jade Green 100 84.44

12-36CCR 1/2" x 3' White 50 67.6712-48CCR 1/2" x 4' " " 50 116.0458-36CCR 5/8" x 3' Brown 25 110.5458-48CCR 5/8" x 4' " " 25 167.5034-36CCR 3/4" x 3' Yellow 25 148.1334-48CCR 3/4" x 4' " " 25 195.63

78-36CCR 7/8" x 3' Purple 15 167.1078-48CCR 7/8" x 4' " " 15 246.471-36CCR 1" x 3' Orange 10 224.171-48CCR 1" x 4' " " 10 313.96

118-48CCR 1-1/8" x 4' Pink 10 3.53/ea114-36CCR 1-1/4" x 3' Dk. Green 9 3.78/ea114-48CCR 1-1/4" x 4' " " 9 5.67/ea

BULk PACk BIRCH WOOD DOWELSSold in Full Bundles Only.Order in pieces, not per bundle.

1828

18


DOWEL PINS

Dealer No. B

HARDWOOD SPIRAL DOWELSBulk

Code Size Ctn List/M516-112S 5/16" x 1-1/2" 15000 $ 32.5638-112S 3/8" x 1-1/2" 15000 36.2338-2S* 3/8" x 2" 10500 51.4238-212S* 3/8" x 2-1/2" 8000 59.5812-2S* 1/2" x 2" 6000 70.3812-212S 1/2" x 2-1/2" 4600 85.6612-3S 1/2" x 3" 3700 105.9712-4S 1/2" x 4" 2700 132.27

* FULL CARTONS ONLY: If less than carton quantity is desired, please order the smaller quantity bags in the next column.

HARDWOOD MULTI-GROOVE DOWELSBulk

Code Size Ctn List/M38-2M 3/8" x 2" 10500 $ 47.5238-212M 3/8" x 2-1/2" 10000 57.0312-4M 1/2" x 4" 3500 162.058MMX25MM 8mm x 25mm 36000 24.708MMX30MM 8mm x 30mm 19200 26.528MMX32MM 8mm x 32mm 28200 30.758MMX38MM 8mm x 38mm 22500 33.97

PRE-GLUED MULTI-GROOVE DOWELWater Activated Glue

Blue in Color

Code Size Ctn List/M6MMX25MM-PG 6mm x 25mm 45000 $ 38.928MMX32MM-PG 8mm x 32mm 28200 38.13

Spiral grooved dowel pins in bags of 500.

Code Size List/bgP52 5/16" x 2" $ 37.44P62 3/8" x 2" 39.87P6212 3/8" x 2-1/2" 51.80P82 1/2" x 2" 59.23

BAGGED SPIRAL GROOVED DOWEL PINS500/Bag

BAGGED SPIRAL GROOVEDDOWEL PINS

100/bag25 bags/ctn.Assortable

Code Size List/bgH42 1/4" x 2" $ 9.71H5112 5/16" x 1-1/2" 8.01H52 5/16" x 2" 10.19H5212 5/16" x 2-1/2" 12.49H6112 3/8" x 1-1/2" 8.88H62 3/8" x 2" 10.03H6212 3/8" x 2-1/2" 11.55H82 1/2" x 2" 12.78

MULTI-GROOVE DOWELS IN RETAIL BAGS12 bags/box

Code Size Bag List/bagF4114 1/4" x 1-1/4" 15 $ 2.12F5112 5/16" x 1-1/2" 15 2.12F6200 3/8" x 2" 15 2.12F7212 7/16" x 2-1/2" 6 2.12F8200 1/2" x 2" 8 2.12

Dowels/

TABLEPINS100 ea/bagFull bags only.

Code Description Ctn List/CHT Birch Pine 5000 $ 8.26

3/8" x 1-1/4"

1829

18


MACMURRAY PACIFIC

BUTTONS & PLUGS

Dealer No. B

SCREWHOLE BUTTONSMushroom

In Bags of 100

Dia.

Code Dia. Wood Ctn List/bgH12B 1/2" Birch 25 bags $ 9.63H38B 3/8" Birch 25 9.77H34B 3/4" Birch 10 18.43H12BO 1/2" Oak 10 18.42H38BM 3/8" Mahog. 10 16.02H38BO 3/8" Oak 10 15.24

In Retail Bags - 12 bags per box

Code Dia. Wood Bag List/bgF38B 3/8" Birch 15 $ 2.12F12B 1/2" Birch 15 2.12F34B 3/4" Birch 6 2.12F10B 1" Birch 5 2.12

Buttons/

SCREWHOLE PLUGSRound Head

In Bags of 100Code Dia. Wood Ctn List/bgH12RP 1/2" Birch 25 bags $ 8.71H38RP 3/8" Birch 25 8.22H38RPO 3/8" Oak 10 14.45H12RPO 1/2" Oak 10 14.62


Code Dia. Wood Bag List/bgF38R 3/8" Birch 15 $ 2.12F12R 1/2" Birch 15 2.12F34R 3/4" Birch 6 2.12F10R 1" Birch 5 1.91

Buttons/

SCREWHOLE PLUGSFlat Head

In Bags of 100Code Dia. Wood Ctn List/bgH12FP 1/2" Birch 25 bags $ 8.68H38FP 3/8" Birch 25 8.25H12FPO 1/2" Oak 10 14.73H38FPM 3/8" Mahog. 10 15.15H38FPO 3/8" Oak 10 13.13H38FPW 3/8" Walnut 10 15.15


Code Dia. Wood Bag List/bgF38F 3/8" Birch 15 $ 2.12F12F 1/2" Birch 15 2.12F34F 3/4" Birch 6 2.12F10F 1" Birch 5 2.12

Buttons/

LAMELLOJOINTING BISCUITSBeech

Oval jointing plates fit easily into slot & allow adjust-ment for perfect alignments without jigs. Dampness of glue swells plate to great strength. Made of com-pressed beech. Will join panels to 3/8" thick.

Sold in full cartons only.

Code Size Ctn List/M0LA 1-3/4" Plate 1000 $ 89.4010LA 2-1/8" Plate 1000 89.4020LA 2-1/2" Plate 1000 89.40

Code Size Ctn List/bx5551PC 1-3/4" Plate 1000 $ 54.95 5552PC 2-1/8" Plate 1000 55.395553PC 2-1/2" Plate 1000 55.39

ECONOMY BIRCH BISCUITSPorter Cable

1830

18


Dealer No. B/E

CORNER BRACES

Code Ctn List/ea521ZC 100 ea. $ .78

#225

This glass clip is designed to hold glass into a rabbeted frame. Lip: 1/4”. Clear in color.

GLASS CLIPS

CORNER BRACESMade of wrought steel. Screw holes countersunk on inside. 1" size has two screw holes, 1-1/2" through 4" have four screw holes, 5" and 6" have six screw holes. Zinc plated.(Screws not included.)

#226

Code Size Ctn List/C226-1 1" 48 $ 40.41226-1.5 1-1/2" 48 53.01226-2 2" 48 80.15226-2.5 2-1/2" 24 91.68226-3 3" 24 112.17226-3.5 3-1/2" 24 120.68226-4 4" 24 $ 1.97/ea226-5 5" 12 4.31/ea226-6 6" 12 4.76/ea

kV HANGER PLATE#521

Keyhole shape hanger plate. Use with #10 x 3/4" flathead wood screws, not included.

Overall: 13/16" x 2", Steel is 1/16" thick.

kV CORNER BRACESZinc plated stamped steel. Use with 3/4" No. 10 flat head wood screw. 100 per box.

Code Size List/ea341 1" x 1" $ .91342 2" x 2" 1.61

MENDING PLATES

Wrought Steel, zinc plated. Screw holes countersunk on inside. 2" size has 2 holes; 2-1/2"- 8" sizes have 4 holes; 10" size has 6 holes. (Screws not included.)

Code Size Ctn List/C225-2.5 2-1/2" 48 $ 57.78 225-3 3" 48 59.96225-4 4" 48 95.96225-5 5" 24 $ 1.01/ea

kV MIRROR & GLASS CLIPS

Screw-apart type glass clip. 1-1/2" wide x 1-1/8" high. For 1/4" or 5/16" glass. Anochrome. 10 per boxwith screws.

1-1/2"

1-1/8"

278 List $ 7.25 ea.

One piece type glass clip.1-1/2" wide x 1" high. For 1/4" or 5/16" glass. Anochrome. 10 per boxwith screws.

277KV List $ 3.73 ea.

1-1/2"

1"

GLASSRETAINING CLIP

1-1/4"

9/32"

An easy-to-install way to secure glass or panels in cabinet doors or lighting fixtures. Variable for panel thickness, the rubber coating on the retaining screw protects glass. Statuary bronze finish.

Code Description Ctn List/ea2004EP Glass clip retainer 1000 $ .60

1/4"

1/8"

BAINBRIDGERABBETED GLASS CLIP1810CL

Code Ctn List/C1810CL 100 ea. $ 25.84

1831

18


MACMURRAY PACIFIC

Stile

HB, Ives Dealer No. B, KV Dealer No. B/E

FASTENERS

SPACE BALLS

The inexpensive solution to your age-old problem:

• Centers solid panels• Compresses if panels expand• Stops panel rattle• Helps eliminate cracking glue joints

Rail

Space Balls will cut out mostmajor call-backs on solid or flatpanel doors.

Diameter: .26" - fits standard stile and rail cutters. 8-10 Space Balls recommended per door.

Code Quantity/Box List/MSB1M 1000 ea. $ 43.47SB5M 5000 ea. 35.42

These one-piece threaded fasteners provide steel threads in wood for fast and secure assembly of com-ponents. Stamped from heavy gauge steel. Precision threaded and designed with a bevelled barrel for easier insertion. Special curved twist-type prongs bite tightly into wood. Zinc plated.

756HB: Pack: 1000 ea.T14-20 and T38-16: Pack: 500 ea.

4-Prong Type 6-Prong Type

CodeThreadSize A B C D List/C

756HB* 10-24 13/32 1/4 .23 3/4 $ 12.36T14-20 1/4-20 7/16 7/32 .305 3/4 19.71

T-NUTS

T14-20 T38-16

6 Prong:

T38-16 3/8-16 7/16 5/16 .440 1 43.564 Prong:

*Discontinued when out

EXTRUDEDGLASS/PANELRETAINER

Clear, pliable plastic glass/panel retainer extrusion. Works well in cabinets with glass doors where back of door shows, and mirror-backed curios. 1000' per roll. Order by the foot.

Code 1' 100' 1000'EGR-CLR $ .70/ft $ .44/ft $ .38/ft

EGR-CLR

Amana 3 Wing Slot Cutter with 3 Wing cutter, arbor & ball-bearing. 5/32” size also used for ‘biscuit-joint’ cutting.

Code Kerf Shank List53407 Slot Cutter 5/32” 1/4” $ 36.2453407-1* Slot Cutter 5/32” 1/2” 54.00

* Special Order

1832

18


Dealer No. B/C

SinkCabinet

Code Description List/boxKK50PCMET.WH Korner, White, 50 pack $ 45.11KK50PCMET.TAN Korner, Tan, 50 pack 45.11KK.MET50SCR.WH Wht Caps & Screws

for 50 Korners18.79

KK.MET50SCR.TAN Tan Caps & Screwsfor 50 Korners

18.79

3/4" 1/2"

2"

1-1/2"3/64" Thick

adjustablescrew slot

3/4" 1/2"

3/16"adjustable slot

5/32"adjustable slot

kOLBE kORNERS FOR PANEL DRAWER FRONTSFastcap

These universal connecting brackets are suitable for the assembly of carcase components and the installation of shelves and rear panels. This means that they can replace cupboard connectors, shelf supports and rear panel fasteners, with the result that a single type of fitting is required to construct fitted cupboards, shelf units, room dividers, etc.

Code Ctn List/ea264.25.909 200 ea. $ 1.40

Typical installation of Universal brackets to secure:

butt-mounted panels flush fitting panels shelves or uppercross member

CABINET CONNECTORS

Mount Shaker drawer fronts and Euro drawer bottoms quickly and easily with Kolbe Korners!

Metal Kolbe Korner Plastic Kolbe Korner

Clean, easy and secure, the Kolbe Korner mounting brack-ets are used for 5-pc. Shaker style drawer fronts. Allows the drawer face to be easily mounted to the box. For Euro drawer slides they can be used as a brace for the drawer bottom.

Metal Korners - Screws and Korners sold separately. Full Cartons only.

Plastic KornersEach 50 pack contains 50 Korners, 250 screws, 50 sets (2 pcs.) Fastcap screw covers.

Code Description List/pkKK50PC.LM Light Maple, 50 pack $ 26.42KK50PC.WH White, 50 pack 26.4

CONNECTING BRACkETS

Used to install false drawer fronts in a frameless cabinet.

1833

18


MACMURRAY PACIFIC

Patwin Dlr. No. B, Others B/D

z CLIP BEDRAIL FITTINGS

Cabinet Frame

CabinetDoor

Designed for use with inset cabinets. Simply screw inside cabinet and rotate to adjust where you want the cabinet door to shut.

Easy to Adjust Screw Euro Door Stop at desired depth

INSET EURO DOOR STOP Fastcap"Cam" adjustable inset stop

BEDRAIL FITTINGS

Can be used as a right or left hand fitting. Particularly sturdy version for hooked connection. Bright Steel. 10 sets per box. (i.e. 40 hooks and 40 latching plates).

95/145

PATWIN “z” CLIP

The “Z” Clip keeps cabinet doors and drawers closed during shipment to job site. Made from extruded plastic.

Code 1 ea. 1,000 5,000 10,000449306 $ 156.56/M 107.62/M 89.66/M 126.38/M

.760

20º.760

.75030º

Code Length List/set271.05.906 95mm $ 12.68271.05.915 145mm 17.04

Available in two lengths: 95mm and 145mm. One set accommodates the four corners of the bed.

PARkER BEDRAIL HANGERS

Plain wrought steel bed fasteners. Ideal for beds having narrow rails. One set consists of one male hook piece and one female eye piece. Countersunk for 1-1/2" x 10 flat head screws.

6 sets/box.

Code Size List/set1614-4 4" $ 10.041615-5 5" 8.691616-6 6" 9.69

INSET DOOR STOPTenn-Tex .030

.835

.500

Door stop for cabinet inset doors. Clear in color. Uses #5 or #6 flathead screws (sold separately).

use #5 or #6 flathead screw

Code Ctn List/CT230 1000 ea. $ 12.79

Code Color Ctn List/eaED-BR Brown 100 ea. $ .20ED-CL Clear 100 .44

ED-BR

ED-CL

1834

18


FASTENERS

Dealer No. B/E

Drill guide accurately locates both hole positions in wood pieces. Designed for use on 3/4" stock.

kV TITE-JOINT FASTENERS

Applies even, controlled pressure between joint members. Solid joint without glue. For 3/4" wood. Packed 100 or 25 per box. One installation drill and guide pack in each box. Zinc.

Code Description Ctn List/ea516-100* Joint Fastener 100 $ 3.27516-25* Joint Fastener 25 3.65516-80 Tightening Assembly 100 2.35

* Full Ctns. Only

Shank fitsall chucks1/4" orlarger.

Drill

kV JOINT FASTENERS

Bolt 4" long. Thread Length: 3-1/2". Plate Size: 7/16" x 3/16" x 1". Can be used in 5/8" wood. 100 complete fasteners per box.

Code Description Ctn List/ea513 Joint Fastener 100 $ 1.36

kV DESk TOP FASTENERSWrought Steel

1547 1548

Code Description Ctn List/ea1547 12 Gauge 100/bx $ .491548 18 Gauge 500/bx .32

DRAW BOLT CONNECTOR

Easy to install fastener which makes a smooth, tight joint. Hex Head Bolt: 1/4-20 x 3-1/2".

Code Description Ctn List/CDRAW BOLTS Hex Head Joint Bolt 500 $ 31.30

Nickel finish.Pack: 100 ea/ctn.

kV STEEL TABLE TOP FASTENERS

Code Description List320 1" Wide, 11 Gauge Steel $ .61/ea323 5/8" Wide, 14 Gauge Steel 33.97/C324 3/4" Wide, 14 Gauge Steel 44.68/C

1835

18


MACMURRAY PACIFIC

TOGGLERS

TOGGLER SCREW ANCHORSfrom Mechanical Plastics

Dealer No. B/E

BA & BB:3/16" - 1/4" Bolt

There are three features that all the Toggler Screw Anchors have in common:

1) They all use a 5/16" hole. 2) All the anchors will take a screw size from a #6 thru #14. 3) All the anchors will work in walls that are thicker than the size range on the box or package (so they can work in a semi-toggled position as a wedge anchor, or in solid material as an expansion anchor).

TA TCTB

100 Togglers per box. Full Boxes only.

Code Description List/bxTA100 Hollow Door, 1/8" - 1/4" $ 23.15TB100 Drywall, 3/8" - 1/2" 24.50TC100 Plaster Wall, 5/8" - 3/4 27.39

TOGGLE BOLTSfrom Mechanical Plastics

BC & BD:3/8" - 1/2" Bolt

Full Boxes only.

Code Takes Bolt Size Ctn List/bxBA100 3/16"-24 100BB100 1/4"-20 100BC25 3/8"-16 25

1836

18


1. Place #2 Phillips screwdriver into recess of E-Z Anchor.

2. Press into wallboard while turning anchor clockwise until seated flush with the wall.

3. Place fixture in position, insert screw (#8 type A or AB screw is recommended).

4. Tighten fixture in place (a min of 1" engagement is recommended).

#8 preferred #6-#10 ø3.5 - 4.5mm

S = Item thickness + 1-1/4" (32mm)

Dealer No. B/E

TOGGLE BOLTS

Code Description List/box30012 50 Anchors with $ 15.90 50 #8 x 1-1/2 Combo Hd screws

For thickeritems, uselonger screw

E-z ANCHORQuickscrews

The E-Z- Anchor is faster than any toggler. It pilots and sinks itself so you don't need a stud. No pre-drill-ing or hole preparation necessary. It is easily backed out. Uses standard #8 Tapping (sheet metal) screw.

Sold in Full Boxes Only.Code Description Box List/bx1436QS Zinc Anchor, #8 100 $ 28.82

HEAVY DUTY TOGGLER

The EZ-Toggler is a self-drilling toggle bolt for heavy-duty anchoring to dry wall. With a 2-1/8" x #8 washer face phillips pan head sheet metal screw. 50 per box, sold in full boxes only.

Code Description Box List/bxEZ-TOG Heavy Duty

Toggle Bolt50 $ 75.89

TOGGLER SNAPSkRU™from Mechanical Plastics

Self-Drilling Drywall Anchor

Drywall Holds Thickness Up To 3/8" 57 lbs. 1/2" 79 lbs. 5/8" 135 lbs.

Holding values: Per anchor with #8 x 1-1/2" screws. Industry standard safe holding = 1/4 of ultimate load.

• Anchor locks on wall - hear it "pop" and lock• Shock-resistant• Vibration-resistant• Installs with screwdriver or screw gun• Positive stop resists overturning• Can remove screw & item, leaving anchor in wall for reuse

(T) Item thicknessMax. 3/4" (19mm)with screw in box

(W) Wall thicknessMin. 3/8" (10mm)Max. 5/8" (16mm)

Sold in Full Boxes only.

1837

18

Documents

Fastener Recognition/Tech Sheetmacpac1.com/catalog/1800.pdf · 2020. 3. 29. · Code Size Box List/M 90S 6 x 1-1/4" 10000 $ 35.71 90GR 6 x 1-1/2" 5000 38.56 Code Size Box List/bx