Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
1April 2019
2
SmartPrivacy® Faux Wood Blinds
Revision Log
Date Revision
2/6/2019
Pg. 5, 11: Added Side by Side/Stacked Blinds option for CordlessPg. 7, 21, 33: Added Standard Deductions for each system (Removed How to Order page)Pg. 8, 22: Updated Wand Drop infoPg. 9: Updated Valance infoPg. 9, 25: Added Standard deductions for Common ValancePg. 10: Added Custom Valance Return infoPg. 14: Revised Mounting Depth requirement infoPg. 16: Added Operating Your Cordless Blind infoPg. 21: Updated Maximum blind length for corded blindsPg. 21-23: Added Custom Cord drop info for Wand Tilt and Cord TiltPg. 23: Added note on Center Tilt for Cord Tilt blindsPg. 25: Updated Valance Return infoPg. 28: Updated Parts and AccessoriesPg. 33–37: Added additional info for SmartReleasePg. 38: Added Size Considerations to the Cheat Sheet
2/8/2019 Pg.7: Updated cordless blind tolerancePg. 9,24: Added additional note on keystones
4/24/2019
Pg. 7: Updated max size for Cordless blinds: 96” max for Pure White (S) onlyUpdated blind height tolerance
Pg. 8, 23, 36: Added Estimated Stacking Heights for each lift systemUpdated “inner cord” & ladder terminology
Pg. 9: Updated wand split note. Removed notation that a 11 ¾” wand could be split.Pg. 21: Removed the 10 temporarily extended colors from the previous program, for Corded blinds. No SmartPrivacy colors have been discontinued.
3
SmartPrivacy® Faux Wood Blinds
Table of ContentsPage
Performance Cordless Blinds
Terminology 4
Features and Options 5
Color Availability 6
General Specifications 7 – 14
Mounting Depth Requirements 15
Parts & Accessories 16
Operating Your Cordless Blind 17
Corded Blinds
Terminology 18 – 19
Features and Options 20
Color Availability 21
General Specifications 20 – 28
Mounting Requirements 29
Parts & Accessories 30 – 31
SmartRelease® Blinds
Terminology 32
Features and Options 33
Color Availability 34
General Specifications 35 – 37
Mounting Requirements 38
Parts & Accessories 39
Cheat Sheet for Faux Wood Blinds 40
4
SmartPrivacy® Performance Cordless Blinds
Terminology
Description
1 PolyDeco Headrail 8 Drum Support 15 Bottom Rail Button
2 Headrail End Cap (Right) 9 Slat Clip 16 Hold Down Bracket(Only available for width 32” and under)
3 Headrail End Cap (Left) 10 Slat 17 3/4” Screw(For Hold down bracket)
4 Wand Tilter 11 Ladder 18 Installation Bracket
5 Spring Box 12 Wand 19 1 1/4” Screw(For Installation bracket)
6 Tilt rod 13 Bottom Rail
7 Drum 14 Bottom Rail End Cap
Performance Cordless Faux Wood BlindPolyDeco Headrail
5
SmartPrivacy® Performance Cordless Blinds
Features & Options
Features
• Smooth cordless lift system for child and pet safety
• Covers a large range of sizes
• Smooth operation and reliable performance
• Award winning SmartPrivacy® seals light gaps with slat-to-slat coverage
• Light-weight, co-extruded slats with 125° heat deflection
• Impact resistant, modern, valance-free PolyDeco headrail
• Engineered bottom rail
Options
• Valances: Designer Crown & Modern Curved
• Valance Returns
• Common Valance
• Keystones
• Cut-out
• Optional Wand Drop sizes
• Side by Side/Stacked blinds
6
SmartPrivacy® Performance Cordless Blinds
No. Color Color Type FinishSlat Size
2” Slat 2.5” Slat
1 Pure White 6016 Solid Embossed 2 Pure White 6016 Solid Smooth 3 Designer White 6051 Solid Smooth 4 Silk White 6017 Solid Smooth 5 Bright White 6018 Solid Smooth 6 Pearl 6019 Solid Smooth 7 Crisp Linen 6057 Solid Embossed 8 Taupe Gray 6103 Solid Embossed 9 Sea Mist 6102 Solid Embossed 10 Storm Gray 6101 Solid Embossed 11 Mist 6957 Printed Embossed ─ ─12 Limed White 6933 Printed Embossed ─ ─13 Gray 6938 Printed Embossed ─ ─14 Truffle 6958 Printed Embossed ─ ─15 Driftwood 6937 Printed Embossed ─ ─16 Granite 6959 Printed Embossed ─ ─17 Natural Oak 6936 Printed Embossed ─ ─18 Chestnut 6921 Printed Embossed ─ ─19 Old Teak 6922 Printed Embossed ─ ─20 Black Walnut 6923 Printed Embossed ─ ─
Color Availability
Available (All printed colors) Available June 2019 ─
7
SmartPrivacy® Performance Cordless Blinds
General Specifications
Size Considerations
Single blind Min. Max. Max SQFT
Blind Width (Net) 16 1/2” 72” (96” starting June 2019)*
36sq.ft(48sqft starting
June 2019)*Blind Length 24” 72” (96” starting June 2019)*
*Starting April 2019, the max width, length, and square footage will increase to 96” by 96”, 48sqft for Pure White S.** Starting June 2019, the max width, length, and square footage will increase to 96” by 96”, 48sqft for all other colors.- The overall max blind size is limited by the maximum area; max width x max height cannot be ordered as one blind.
OM IMBlind Width Order width Order width – 3/8”
Blind Drop Order height Order height – 1/16”
Standard Deductions
Tolerance: Blind width (net) may vary ±1/4”.Blind length may vary +0~1 ¾” for 2’’ blinds, and +0~2 ¼” for 2.5’’ blinds.
Order drop measurement: Measure from the top edge of the headrail to bottom edge of bottom rail, with slats in an open position.
Inside mount Outside mount
For outside mount applications, allow
the blind to overlap approximately 1
1/2” on each side of the window.
Single blind Min. Max. Max SQFT
Blind Width (Net) 16 1/2” 96”48sqft
Blind Length 24” 96”
For Pure White in Smooth Finish Only* For all other colors until June 2019**
8
SmartPrivacy® Performance Cordless Blinds
General Specifications
Estimated Stacking Heights
Blind Length 2" Slat Qty
2" Slat Stacking Height (inches) 2.5" Slat
Qty
2.5" Slat Stacking Height (inches)
Solid Color Printed Color Solid Color Printed
Color30" 16 6.08 6.20 12 5.56 5.65 36" 19 6.47 6.62 15 5.95 6.07 42" 23 6.99 7.17 18 6.34 6.48 48" 26 7.38 7.58 20 6.60 6.76 54" 30 7.90 8.13 23 6.99 7.17 60" 33 8.29 8.55 26 7.38 7.58 66" 37 8.81 9.10 28 7.64 7.86 74" 41 9.33 9.65 32 8.16 8.41 78" 43 9.59 9.93 34 8.42 8.69 84" 47 10.11 10.48 36 8.68 8.96 90" 50 10.50 10.89 39 9.07 9.37 96" 53 10.89 11.30 42 9.46 9.79
*The above tables are estimated calculations based on the stacking height before installation. Actual stacking heights may vary. This info cannot be used for RGA purposes.
Ladder Chart
Note : Number of ladders may vary if the blind order is close to the maximum width
Blind Width (Net) # of Ladders # of Inner Cords
X≦24" 2 4
24"<X≦37" 3 4 or 5
37"<X≦50" 4 4
50"<X≦63" 5 5
63"<X≦76" 6 6
76"<X≦89" 7 6
89"<X≦96" 8 6
9
SmartPrivacy® Performance Cordless Blinds
(Net) Blind Width (X) Blind Length (Y) Standard Wand
Drop Optional Wand
Drop Tolerance
All
Y≦36” 11 ¾”11 ¾”17 ¾”29 ¾”38 ¼”
Wand Drop tolerance:-1”~ 0”
36"<Y≦48” 17 ¾” *
48"<Y≦72” 29 ¾” *
72"<Y≦96” 38 ¼” *
Wand Drop Standard
Wand drops marked with * indicates that size may be split into 2 or 3 pieces, depending on the blind width. The 11 ¾” wand will not be split regardless of the blind width.
• Wand Drop is measured from the top of the headrail, to the bottom of the wand grip when slats are in a level opened position. Wand drop is not the length of the wand.
• Wand Control Location
• Left
• Wand Drop Sizes• 4 wand drop sizes• The standard wand drop size is the default size for a blind at the given length• Other wand drop sizes can be selected as an option• Common Valance: For blinds under a common valance, both wands will be based on
the standard size from the smallest blind.
General Specifications
10
SmartPrivacy® Performance Cordless Blinds
General Specifications
Valances• Standard: No Valance
• Optional: 2 ½” Modern Curved & 3.25” Designer Crown Valance
Description1 Valance
2 Valance Return
3 Valance Return Joinery
4 Valance Clip
Common Valance• The minimum gap between two blinds is 1/2”.
Keystone
Valance Connector
Standard Deductions for blinds with a Common Valance
Left blind width(Net) = Left order width – 3/8”Center blind width(Net) = Center order width – 3/8”Right blind width(Net) = Right order width – 3/8”
Left blind width(Net) = Left order width Center blind width(Net) = Center order widthRight blind width(Net) = Right order width
1. For IM without valance return, the standard common valance size = window opening size - 1/8”2. For IM with valance return, the standard common valance size = window opening size + 1/4”3. For OM with valance return, the standard common valance size = window opening size + 1” + 5/16”*(blind qty - 1)
(IM)
(OM)
Spliced Valances• Standard: Valance Connector
• Valance will be spliced when inner dimensions exceed 96”• Custom split location is not available
• Optional: Keystone• Keystone quantity and custom split are optional (Split valance
equally, or split at custom locations)• No min width required for keystones
11
SmartPrivacy® Performance Cordless Blinds
Fully recessed IB:2 ½” Modern Curved valance and no valance returnMin. mounting depth is 3 7/8”
Fully recessed IB: 3 ¼” Designer Crown valance and no valance returnMin. mounting depth is 4 1/16”
Semi-IB:Min. mounting depth is 2 7/8”Valance return size is 3/4” (inner dimension)
Semi-IB:With min. mounting depth 1 5/8”Valance return size is 2” (inner dimension)
OB with valance and valance return:Valance return size is 3 9/16” (inner dimension)
General Specifications
Valance & Return Sizes
Custom Valance return: between 1/2” and 5”
12
SmartPrivacy® Performance Cordless Blinds
General Specifications
Side by Side/Stacked Blinds
This option is available for multiple cordless blinds that will need to have the exact same wand placement due to being side by side or stacked on top of each other.
Side by Side/Stacked blinds must have the same:• Width• Slat Size• Color & finish
+
Stacked
Side by Side
+
13
SmartPrivacy® Performance Cordless Blinds
A cut-out is an area of the blind needs to be removed in order for the blind to avoid an existing obstruction,.
• Available for Single Blinds / Common Valance
• Detailed measurements of the desired removed area must include:
• Cut-out width• Cut-out height• Recommended: Please provide a diagram with marked measurements
• Cut-outs are:
• Measured when the slats are in a closed position• Made on complete slats only. Partial slat cuts will not be made.
Cut-out Location Blind Width (X)
Min cut-out size
Width (E)
Max. cut-out size
Width (E)Diagram
Bottom Corner Left/Bottom Corner Right/Bottom Both
Corner
(For cut-outs on the bottom rail/bottom
section of the slats)
16.5"≦X≤18"
0.125''
2''
X>18" 4.5”
Left Side/Right Side/Both Sides
(For cut-outs in the middle drop
section of the slats)
16.5"≦X≤18" 2''
X>18" 4.5”
General Specifications
Cut-outs
Diagram Example
14
SmartPrivacy® Performance Cordless Blinds
General Specifications
Blind Width (Net) Installation Bracket Quantity
X≦37” 2
37”<X47” 3
47”<X≦75” 4
75"<X≦96" 5
Hardware
Screws Quantity
1 1/4” Screw Installation bracket qty x 22” Screw
(with spacer) Installation bracket qty x 2
3/4” Screw Hold down bracket qty x 2
Blind Width (Net) Valance Clip qty
X≦37” 2
37”< X <60 3
60” ≦X ≦96” 4
Valance Valance Return Connector qty
2.5” Modern Curved Valance(optional) 2
3.25” Designer Crown Valance(optional) 4
15
SmartPrivacy® Performance Cordless Blinds
Mounting Depth Requirements
Valance Option Fully Recessed Semi-IB
Without Valance
2 13/16” 1 ½”
With 2 ½” Modern Curved Valance
(Optional)
Fully Recessed Semi-IB with bracket flush to wall Semi-IB
3 15/16” 2 7/8” 1 5/8”
No valance returnValance return size: ¾”
(inner dimension)Valance return size: 2”
(inner dimension)
With 3 ¼” Designer Crown Valance
(Optional)
Fully Recessed Semi-IB with bracket flush to wall Semi-IB
4 1/16” 2 7/8” 1 5/8”
No valance returnValance return size: ¾”
(inner dimension)Valance return size: 2”
(inner dimension)
2 13/16" 1 1/2"
99.6mm [3 15/16"] 72.6mm [2 7/8"]
19mm [3/4"]
1 5/8"
2"
16
SmartPrivacy® Performance Cordless Blinds
Component Hardware Profile Component
Hardware Profile
Installation Bracket
Valance Clip
(Optional)
End Cap for Bottom rail
Valance Connector
(Default for Spliced Valances)
Hold Down Bracket
(Only available for widths 32” and under)
Valance Return Connector
(Optional)
Shim
(Optional)Wand
Parts & Accessories
17
SmartPrivacy® Performance Cordless Blinds
Operating Your Cordless Blind
Tilting Wand: Rotate the wand to achieve the desired slat position.
To lower the blind: Pull the blind down, by hand, from the bottom rail. Slats can be in an opened or closed position when lowering the blind.
To raise the blind: Gently tilt the slats towards you at a 45 degree angle before lifting the bottom rail. Lift by hand with slats in an open position.
*Do not leave slats in a closed up or closed down position while lifting the bottom rail.
18
SmartPrivacy® Corded Faux Wood Blinds
Description1 Steel Headrail 11 End Cap 21 Bottom Rail2 Drum Support 12 Screw for bracket 22 Bottom Rail Button3 Drum 13 First Slat Clip 23 Wand (PVC)4 Wand Tilter 14 Cord Release Device 24 Hold Down Bracket5 Tilt rod 15 Tassel 25 Screw for Hold Down Bracket& Cord Cleat6 Ring stopper 16 Pull Cord 26 Valance7 Supporting Bracket 17 Tassel Cord 27 Valance Return8 Insta-Lock 18 Warning Tag 28 Valance Return Joinery9 Box Bracket-Left 19 Slat 29 Valance Clip10 Box Bracket-Right 20 Ladder 30 Cord Cleat
Terminology
Corded Faux Wood Blind - Standard Wand TiltSteel Headrail
19
SmartPrivacy® Corded Faux Wood Blinds
Description1 Steel Headrail 11 End Cap 21 Ladder2 Drum Support 12 Screw for bracket 22 Bottom Rai3 Drum 13 First Slat Clip 23 Bottom Rail Button4 Wand Tilter 14 Cord Release Device 24 Hold Down Bracket5 Tilt rod 15 Tassel 25 Screw for Hold Down Bracket& Cord Cleat6 Ring stopper 16 Pull Cord 26 Valance7 Supporting Bracket 17 Tassel Cord 27 Valance Return8 Insta-Lock 18 Warning Tag 28 Valance Return Joinery9 Box Bracket-Left 19 Tilt Cord 29 Valance Clip10 Box Bracket-Right 20 Slat 30 Cord Cleat
Terminology
Corded Faux Wood Blind - Optional Cord TiltSteel Headrail
20
SmartPrivacy® Corded Faux Wood Blinds
Features and Options
Standard Features
• SmartPrivacy® standard
• 3 ¼” designer crown valance
• Two slat sizes: 2” & 2 ½”
• Engineered trapezoid bottom rail
• Low profile steel headrail
• Standard Wand tilt system
Options
• Valances: Designer Crown & Modern Curved
• Valance Returns
• Common Valance
• Keystones
• Cord tilt system
• Optional Wand Drop sizes
• Cut-out
21
SmartPrivacy® Corded Faux Wood Blinds
Color Availability
No. Color Color Type FinishSlat Size
2” Slat 2.5” Slat
1 Pure White 6016 Solid Embossed
2 Pure White 6016 Solid Smooth
3 Designer White 6051 Solid Smooth
4 Silk White 6017 Solid Smooth
5 Bright White 6018 Solid Smooth
6 Pearl 6019 Solid Smooth
7 Crisp Linen 6057 Solid Embossed
8 Taupe Gray 6103 Solid Embossed
9 Sea Mist 6102 Solid Embossed
10 Storm Gray 6101 Solid Embossed
11 Mist 6957 Printed Embossed
12 Limed White 6933 Printed Embossed
13 Gray 6938 Printed Embossed
14 Truffle 6958 Printed Embossed
15 Driftwood 6937 Printed Embossed
16 Granite 6959 Printed Embossed
17 Natural Oak 6936 Printed Embossed
18 Chestnut 6921 Printed Embossed
19 Old Teak 6922 Printed Embossed
20 Black Walnut 6923 Printed Embossed
22
SmartPrivacy® Corded Faux Wood Blinds
Wand Tilt Cord Tilt
Blind Size Min Max Sqft Min Max Sqft
Width (Net) 6 1/2” 96”
42 sqft
6 1/2” 96”64 sqft
Length 25 1/2” * 118” 50 ½” * 118”
Size Considerations
1. The overall max blind size is limited by the maximum area; max width x max height cannot be ordered as one blind.
2. * Custom Blind Drop: • Wand Tilt has a standard min. blind length of 25 ½”, but a custom blind length of at
least 10” is available when a custom cord drop is first selected. • Cord Tilt has a standard min. blind length of 50 ½”, but a custom blind length of at
least 10” is available when a custom cord drop is first selected.
Standard Deductions
Inside Mount:
Blind Width= Ordered Width – 3/8”
Blind Length= Ordered Length – 3/16”
Outside Mount:
Ordered Width = Blind Width
Ordered Length= Blind Length
Tolerance
Width Tolerance= ±1/8”
Length Tolerance= - 1/8” + 3/8”
Order drop measurement: Measure from the top edge of the headrail to bottom edge of bottom rail, with slats in an open position.
General Specifications
23
SmartPrivacy® Corded Faux Wood Blinds
Estimated Stacking Height
Blind Width # of Ladders # of InnerCords
Up to 24” 2 4
24 1/8” – 37” 3 5
37 1/8” – 50” 4 4
50 1/8” – 63” 5 5
63 1/8” – 76” 6 6
76 1/8” – 89” 7 6
89 1/8” – 96” 8 6
Ladder Chart
Blind Length 2" Slat Qty
2" Slat Stacking Height (inches) 2.5" Slat
Qty
2.5" Slat Stacking Height (inches)
Solid Color Printed Color Solid Color Printed Color
30" 16 4.56 4.69 12 4.04 4.14 36" 19 4.95 5.10 15 4.43 4.55 42" 23 5.47 5.65 18 4.82 4.96 48" 26 5.86 6.07 20 5.08 5.24 54" 30 6.38 6.62 23 5.47 5.65 60" 33 6.77 7.03 26 5.86 6.07 66" 37 7.29 7.58 28 6.12 6.34 78" 44 8.20 8.55 34 6.90 7.17 84" 47 8.59 8.96 36 7.16 7.44 90" 50 8.98 9.37 39 7.55 7.86 96" 54 9.50 9.93 42 7.94 8.27
102" 57 9.89 10.34 45 8.33 8.69 108" 61 10.41 10.89 47 8.59 8.96 118" 67 11.19 11.72 52 9.24 9.65 *The above are estimated calculations based on the stacking height before installation. Actual stacking heights may vary. This info cannot be used for RGA purposes.
24
SmartPrivacy® Corded Faux Wood Blinds
General Specifications
Wand Tilt: Wand Standard
Blind Width (Net) (X) Blind Length (Y) Standard Wand
DropOptional Wand
Drop Tolerance Tassel Cord Length
Tassel Cord Length
Tolerance
All
Y≦36” 11 3/4”11 3/4”
17 3/4” *29 3/4” *38 1/4” *47 ¼” *
-1”~ +0” <(0.4)Y -1/2”~ +0”
36"<Y≦48” 17 3/4” *
48"<Y≦72” 29 3/4” *
72"<Y≦96” 38 1/4” *
96”<Y≦118” 47 ¼” *
• Wand Drop is measured from the top of the headrail, to the bottom of the wand grip when slats are in a level opened position. Wand drop is not the length of the wand.
• Wand Drop Sizes• 5 wand drop sizes• The standard wand drop size is the default size for a
blind at the given length• Other wand drop sizes can be selected as an option
Blind Length (Y)
Tilt Cord Length
Pull Cord Length
Cord Length
Tolerance
Standard Y≥25 ½” <(0.4)Y <(0.4)Y -1/2”~ +0”
Custom 10”≦Y<25 ½” <(0.4)Y <(0.4)Y -1/2”~ +0”
Wand Tilt: Tassel Cord Standard
1. Cord length is measured from the top of headrail to the bottom of the tassels, when slats are in an open position.
2. * Custom Cord Drop: The cord drop must be less than 40% of the ordered blind drop. Please follow the formula using the blind drop to calculate the custom cord drop:
• Y = Custom blind drop: 10” ≦ Y < 25 ½” • Y2 = Minimum cord drop: Y2 = Y(0.4) - 1”
(ie.) blind drop 20” ≈ cord drop 7” , 20”(0.40) – 1” = 7”
Wand drops marked with * indicate the wand could be split into 2, 3, or even 4 pieces. Wands are split
when they exceed the blind width, to ensure protection when in transit.
25
SmartPrivacy® Corded Faux Wood Blinds
General Specifications
Cord Tilt: Tilt Cord and Pull Cord Standards
1. Cord length is measured from the top of headrail to the bottom of the tassels, when slats are in an open position.
2. Custom Drop: To select a custom blind drop (under 50 ½”), you must select a custom cord drop of at least 20”.
Blind Length (Y) Tilt Cord Length
Pull Cord Length
Cord Length Tolerance
Standard Y≥50 ½” <(0.4)Y <(0.4)Y -1/2”~ +0”
Custom 10”≦Y<50 ½” <20” <20” -1/2”~ +0”
Control Location for Corded Blinds
Blind width Wand Tilt Blind Cord Tilt Blind
6.5"≦Blind Width<12" Wand Tilt, NO Lift Center Tilt*, NO Lift
Blind Width≥12” Wand tilt left, lift cord right Cord tilt left, lift cord right
*Center tilt is only available when the blind width is less than 12”
26
SmartPrivacy® Corded Faux Wood Blinds
Spliced Valances• Standard: Valance Connector
• Valance will be spliced when the inner dimensions exceeds 96”• Custom split location is not available with valance connectors
• Optional: Keystone• Keystone quantity and Custom Split are optional (Split valance
equally, or split at custom locations)• No min width required for keystones
General Specifications
Valances• Standard: 3 ¼” Designer Crown
• Optional: 2 ½” Modern Curved
Description
1 Valance
2 Valance Return
3 Valance Return Joinery
4 Valance Clip
Common Valance• The gap between each blind can be between 5/16” (min) and 12” (max).
Keystone
Valance Connector
27
SmartPrivacy® Corded Faux Wood Blinds
Valance Width Valance Return (inner dimension)
Inside Mount with NO returns Blind width + 0.25”
Semi-inside Mount Blind width + 5/8” ¾”
Outside Mount with returnsWand Tilt Blind width +1” For 2” blinds: 3 ½”
For 2 ½” blinds: 4”
Outside Mount with returnsCord Tilt Blind width +1” For 2” blinds: 3 1/16”
For 2 ½” blinds: 3 9/16”
General Specifications
*All measurements are the BACKSIDE valance measurement *Custom valance return size: minimum ½” and maximum 5”
Valance & Valance Returns
Standard Deductions for blinds with a Common Valance
Left blind width(Net) = Left order width – 3/8”Center blind width(Net) = Center order width – 3/8”Right blind width(Net) = Right order width – 3/8”
1. For IM without valance return, the standard common valance size = window opening size - 1/8”2. For IM with valance return, the standard common valance size = window opening size + 1/4”3. For OM with valance return, the standard common valance size = window opening size + 1” + 5/16”*(blind qty - 1)
(IM) (OM)
Left blind width(Net) = Left order width Center blind width(Net) = Center order widthRight blind width(Net) = Right order width
28
SmartPrivacy® Corded Faux Wood Blinds
Cut-outs
Cut-out Location Blind Width (x)
Min cut out size on Width (E)
Max. cut out size on Width (E) Remarks
Bottom Corner Left/Bottom Corner Right/Bottom Both Corner
(cut-out on the bottom rail and the bottom section of the slats)
6.5"≤X<12"
1/8''
0.5''
12"≦ X≦18" 2''
18"<X≦96 4.5''
Left Side/Right Side/Both Side
(cut-out on the middle drop section of the slats)
6.5≤X<12" 0.5''
12"≦ X≦18" 2''
18"<X≦96 4.5''
General Specifications
Cord TiltWand Tilt
A cut-out is an area of the blind needs to be removed in order for the blind to avoid an existing obstruction,.• Available for Single Blinds / Common Valance
• Detailed measurements of the desired removed area must include:
• Cut-out width• Cut-out height• Recommended: Please provide a diagram with marked measurements
• Cut-outs are:
• Measured when the slats are in a closed position• Made on complete slats only. Partial slat cuts will not be made.
29
SmartPrivacy® Corded Faux Wood Blinds
Mounting Depth Requirements
Blind Type Bracket TypeFully
RecessedIB
Semi-IBMinimumMounting
Depth
2” Blind with Designer Crown Valance Standard box bracket 3 15/16”
2 ¾”*Valancereturn: ¾”
2 3/16”*Valance
return: 1 5/16”
2 ½” Blind with Designer Crown Valance Standard box bracket 4 7/16”
3 1/4”*Valancereturn: ¾”
1 11/16”*Valance
return: 2 5/16”
2” Blind with Designer Crown Valance Swivel bracket (optional) 3 ¾” NA
2 ¾”*Valance
return: 9/16”
2 ½” Blind with Designer Crown Valance Swivel bracket (optional) 3 7/8” NA
2 13/16”*Valance
return: 9/16”
2” Blind with Modern Curved Valance Standard box bracket 3 13/16”
2 ¾”*Valancereturn: ¾”
2 3/16”*Valance
return: 1 5/16”
2 ½” Blind with Modern Curved Valance Standard box bracket 4 5/16”
3 ¼”*Valance return: ¾”
1 11/16”*Valance
return: 2 5/16”
2” Blind with Modern Curved Valance Swivel bracket (optional) 3 5/8” NA
2 ¾”*Valance
return: 9/16”
2 ½” Blind with Modern Curved Valance Swivel bracket (optional) 3 ¾” NA
2 13/16”*valance
return: 9/16”
Inside Mount Depth Requirement - Wand Tilt and Cord Tilt
30
SmartPrivacy® Corded Faux Wood Blinds
Component Hardware Profile Component
Hardware Profile
Box Bracket
2” blinds 2.5” blinds
Valance Clip
(Optional)
Left Right Left Right
Supporting Bracket
Valance Connector
(Default for Spliced Valances)
Swivel Bracket
(Optional)
For OB For IB For OB For IB
Valance Return Connector
(Optional)
End Cap for Bottom rail
Wand
Hold Down Bracket
(Only available for widths 32” and under)
Shim
(Optional)
Parts & Accessories
31
SmartPrivacy® Corded Faux Wood Blinds
Blind Width (Net) Box Bracket Supporting Bracket
Swivel Bracket (Optional)
37” or less 2 0 2
37” to 47” 2 1 3
47 1/8” to 59 7/8” 2 2 4
60” to 75” 2 2 4
75 1/8” to 96” 2 3 5
Brackets
Blind Width (Net) Valance Clip
37” or less 2
37” to 59 7/8” 3
60” to 96” 4
Valance Clips
Valance Return Connectors
Valance Type Quantity
Designer Crown (Default) 4
Modern Curved (Optional) 2
Parts & Accessories
Hardware Components
32
SmartPrivacy® SmartRelease™ Faux Wood Blinds
SmartRelease™ Cord Loop Faux Wood BlindEuro Rail
Terminology
Description
1 Installation Bracket 6 Slat Clip 11 Bottom Rail End Cap
2 Screw for Bracket 7 Slat 12 Cord Loop
3 Cord Loop Control Assembly 8 Ladder Cord 13 Cord Loop Cord Tensioner
4 Euro Rail(Aluminium Head Rail) 9 Bottom Rail 14 Screw for Cord Tensioner
5 Head Rail End Cap 10 Bottom Rail Button
33
SmartPrivacy® SmartRelease™ Faux Wood Blinds
• Cut-out
• Control Location
• Decorative Euro rail
• Comes in 4 colors and finishes:
Standard Features
• SmartPrivacy® standard
• Two slat sizes: 2” & 2 ½”
• Engineered trapezoid bottom rail
• Decorative, valance-free, Euro style rail
• Convenient SmartRelease™ system that drops entire blind down with ease of just one simple pull
Options
Features and Options
Copper Brushed Aluminum Black White
34
SmartPrivacy® SmartRelease™ Faux Wood Blinds
Color Availability
No. Color Color Type FinishSlat Size
2” Slat 2.5” Slat
1 Pure White 6016 Solid Embossed
2 Pure White 6016 Solid Smooth
3 Designer White 6051 Solid Smooth
4 Silk White 6017 Solid Smooth
5 Bright White 6018 Solid Smooth
6 Pearl 6019 Solid Smooth
7 Crisp Linen 6057 Solid Embossed
8 Taupe Gray 6103 Solid Embossed
9 Sea Mist 6102 Solid Embossed
10 Storm Gray 6101 Solid Embossed
11 Mist 6957 Printed Embossed
12 Limed White 6933 Printed Embossed
13 Gray 6938 Printed Embossed
14 Truffle 6958 Printed Embossed
15 Driftwood 6937 Printed Embossed
16 Granite 6959 Printed Embossed
17 Natural Oak 6936 Printed Embossed
18 Chestnut 6921 Printed Embossed
19 Old Teak 6922 Printed Embossed
20 Black Walnut 6923 Printed Embossed
35
SmartPrivacy® SmartRelease™ Faux Wood Blinds
Single Blind Min Max Max Area
Blind Width (Net) (X) 22” 96”43 sqft
Blind Length(Y) 10” 78”
General Specifications
Size Considerations
Cord loop/Cord Tensioner
Default Optional
Right Left
Control Position
1. The overall max blind size is limited by the maximum area; max width x max height cannot be ordered as one blind.
Outside Mount: Blind Width(Net)=Order width (equal to slat length).
Inside Mount: Blind Width(Net)= Order width – 3/8”.
Tolerance: Blind Width (Net) may vary ±1/8” Blind height may vary -1/8’’, + 3/8”
Order drop measurement: Measure from the top edge of the headrail to bottom edge of bottom rail, with slats in an open position.
Standard Deductions
36
SmartPrivacy® SmartRelease™ Faux Wood Blinds
General Specifications
Cord Loop Cord Standard
Blind Drop (Y) Cord Loop Cord Drop (Y2) Drawing
Y<25 5/8" 16"
25 5/8" ≦Y<36" 24"
36"≦Y<48" 36”
48" ≦Y<60" 48”
60”≦ Y<78” 60”
Ladder & Inner Cord Quantity Standard
Blind Width(Net) # of Ladders
# of InnerCords
22” ≦X≦24” 2 4
24”<X≦37” 3 5
37”<X≦50” 4 6
50”<X≦63” 5 8
63”<X≦76” 6 10
76”<X≦89” 7 11
89”<X≦96” 8 12
• Includes Cord Loop Tensioner• Custom cord drop is available
• Minimum: 12”
Blind Length
2" Slat Qty
2" Slat Stacking Height (") 2.5"
Slat Qty
2.5" Slat Stacking Height (")
Solid Color
Printed Color
Solid Color
Printed Color
30" 16 6.06 6.18 12 5.54 5.63 36" 19 6.44 6.59 15 5.93 6.04 42" 22 6.83 7.01 17 6.19 6.32 48" 26 7.35 7.56 20 6.57 6.73 54" 29 7.74 7.97 23 6.96 7.15 55" 30 7.87 8.11 23 6.96 7.15 60" 33 8.26 8.52 25 7.22 7.42 66" 36 8.65 8.94 28 7.61 7.83 74" 41 9.30 9.63 32 8.13 8.39 78" 43 9.56 9.90 34 8.39 8.66
Estimated Fabric Stacking Height
*The above are estimated calculations based on the stacking height before installation. Actual stacking heights may vary. This info cannot be used for RGA purposes.
37
SmartPrivacy® SmartRelease™ Faux Wood Blinds
Cut-outs
Blind Width (x)
Min cut-out size on Width
(E)
Max. cut-out size on Width
(E)
Min blind drop after cut (F)
Max blind drop after cut (F) Drawing
X≥22" 1/8” 4.5” F>2 3/4”
2" : F≤Y-1 3/4”
2.5": F≤Y-2 5/16”
General Specifications
A cut-out is an area of the blind needs to be removed in order for the blind to avoid an existing obstruction,.• Available for Single Blinds / Common Valance
• Detailed measurements of the desired removed area must include:
• Cut-out width• Cut-out height• Recommended: Please provide a diagram with marked measurements
• Cut-outs are:
• Measured when the slats are in a closed position• Made on complete slats only. Partial slat cuts will not be made.
SmartRelease™ Cord Loop
38
SmartPrivacy® SmartRelease™ Faux Wood Blinds
Mounting Type Slat Size Mounting Depth Requirement
Inside Mount 2” & 2.5” 2 7/8”
Semi - Inside Mount 2” & 2.5” 5/8”
Blind Width (Net) Installation bracket Qty
X ≦ 37" 2
37” < X ≦ 47" 3
47"< X ≦ 75" 475"< X ≦ 96" 5
Screws Qty
1 1/4” Screw Installation bracket qty x 22” Screw
(With Shim) Installation bracket qty x 2
Installation Bracket qty/Screw qty
Mounting Depth Requirements
Mounting Depth Requirements
39
SmartPrivacy® SmartRelease™ Faux Wood Blinds
ItemProfile
2’’ Blinds 2.5’’ Blinds
Installation Bracket
End cap for Bottom rail
Cord loop Cord Tensioner
Hold Down Bracket(optional)
Shim(optional)
1 1/4” Screw(For Installation bracket)
M4x48mm Screw(For Cord loop Cord Tensioner)
3/4” Screw(For Hold down bracket)
2” Screw(For Installation bracket with
spacer block; optional)
Parts & Accessories
40
SmartPrivacy® Faux Wood Blinds
Cheat Sheet for Faux Wood Blinds
System Cordless Corded SmartRelease™ Cord loop
Headrail PolyDeco Headrail Steel Headrail Euro Headrail
TiltStandard Default Option Standard
Wand Tilter Wand Tilter Cord Tilter Cord Loop
Control Location Option No No No Yes
(Left or Right)
Colors 20 colors and finishes* 20 colors and finishes 20 colors and finishes
Valance Options
No Valance (Default)
Option1: Designer Crown Valance
Option 2: Modern Curved Valance
Designer Crown Valance (Default)
Option: Modern Curved ValanceNo Valance
Common Valance/ Keystone Yes Yes No
2 on 1 No No No
Cut Out Yes Yes Yes
Swivel bracket No Yes No
Size Considerations
Blind Width: --------------------
Blind Length:
Max Area 36 sqft 42 sqft 64 sqft 43 sqft
Min Max
16 ½” 72” *24” 72” *
Min Max
6 ½” 96”
25 ½” * 118”
Min Max
6 ½” 96”
50 ½” * 118”
Min Max
22” 96”
10” 78”
* See detailed sections for more information.